Prikolica z nizko platformo

SCHWARZMÜLLER Tieflader mit gekröpftem Plateau

Stanje: novo, največja dovoljena obremenitev: 23.800 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete inventory of vehicles available immediately or at short notice on our website. Excerpt of equipment. Full equipment details available upon request. Weights: * Permissible gross weight: 24 t * Technical gross weight: 30 t Dimensions: * Approx. 2,100 mm = raised front platform including sloped frame, corners beveled * Approx. 5,350 mm = low-bed platform – flat loading area * Approx. 850 mm = rear ramp slope * Overall width: approx. 2,550 mm (or approx. 3,000 mm with extensions) * Loaded loading height: approx. 870 mm * When assembling tractor-trailer combinations, compliance with the legally permissible overall height and train length must be observed! Chassis/Frame: * Steel welded construction with front frame cranking and rear bevel * Ramp slope with excavator bucket recess in the center = rear depression between longitudinal beams, approx. 2,300 mm long * Integrated into the outer frame: 5 pairs of approx. 4 t lashing lugs (4x in the low-bed, 1x on the raised platform) * 7 pairs of recessed, pull-out lashing rings, approx. 10 t (4x low-bed, 1x on ramp slope, 2x on raised platform) * Standard ball bearing slewing ring Frame attachments: * Both sides of the low-bed platform equipped with extendable width extensions with approx. 50 mm softwood planks (track width of construction machinery being transported must not exceed outer frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, arrangement: 1 pair at the front of the raised platform inside longitudinal beams, 1 pair right and left in the excavator bucket recess at the far rear, 1 pair at the front of the raised platform before the frame cranking, inside beams, 1 pair at the rear of the low-bed before the ramp slope in the bucket recess, left + right Hfsdpfx Ahey Aug Rspsh Towing device: * Fixed tow bar with swivel coupling eye approx. 40 + 50 mm, cranked design, silent bushing mounting, tow bar retaining spring with tensioner * Truck coupling height from approx. 830 mm to approx. 1,030 mm * Tow bar length approx. 1,800 mm Support equipment: * 2 automatic folding support legs at the rear Axles: * SAF air-suspension low-loader axles with drum brakes, load capacity 11 t/axle, S-cam brakes approx. 300/200 mm, automatic brake adjusters Wheels: * 12 tires, size 235/75 R 17.5, 141J, brand as per factory selection Brake system/Suspension: * Brake system according to ECE regulation R13 * Two-line air brake system * Manufacturer Wabco, EBS system 4S3M, 1st and 2nd axle equipped with sensors * RSS/RSP Stability Program * Spring-loaded parking brake on 2nd and 3rd axles * Brake/air connection lines with 2 separate couplings (yellow/red) * EBS/ABS connection cable * Air suspension with lift/lowering function (rear axles only), automatic ride height adjustment from 15 km/h (RTR), with axle bump stop on the front axle Assistance/Safety systems: * SWIT – Schwarzmüller Intelligent Telematics * Axle load display via EBS CAN bus signal for display in the driver’s cab (truck must be prepared accordingly, not a calibrated scale) * Tire pressure monitoring per ECE regulation 141, with pressure sensors in the wheels, for display in the cab (display, etc. must be present in the tractor unit) Floor: * Approx. 50 mm softwood flooring, impregnated, protruding approx. 5–10 mm above the top edge of the frame * Steel chequer plate covers over the wheels Ramps: * 2 foldable, one-piece lightweight steel loading ramps, approx. 2,800 mm long, approx. 750 mm wide, with 35 mm

Stanje: novo, največja dovoljena obremenitev: 30.860 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpts from the equipment specifications. Full equipment details available upon request. Hfsdpjy Auhnsfx Ahpoh Chassis: * Steel welded construction with front frame cranking, chamfered front corners, and rear chamfer, drive-up slope with centrally located excavator bucket recess = depression at the rear between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 4 pairs of approx. 4 t lashing brackets, 7 pairs of recessed, retractable approx. 10 t lashing rings (2x on the raised platform, 1x at the front cranked slope, 3x in the low bed between the wheel recesses, 1x on the drive-up slope) 2 Pairs of Wheel Recesses: * 1 pair of wheel recesses, approx. 2,300/1,270 x 400 mm (L1/L2 x D), located at the front after the cranking, including one-piece drive-over aluminium cover, for max. surface load approx. 11,650 daN each * 1 pair of wheel recesses, approx. 1,390/590 x 270 mm (L1/L2 x D), between 3rd and 4th axle, including one-piece drive-over aluminium cover, suitable for transporting wheel loaders with wheelbase approx. 2,700 - 3,600 mm, wheel diameter approx. 1,485 – 1,740 mm, maximum rear wheel loader overhang 2,220 mm * Width between the wheel recesses approx. 1,255 mm (outer/outer beam spacing) Frame Attachments: * 5 pairs of stake pockets in the outer frame for rectangular tube stakes approx. 100 x 50 x 5 mm (3x in the low-bed, 2x on the raised platform) * Low-bed platform with extendable width extensions on both sides with softwood planks approx. 50 mm (the track width of machines to be transported must not exceed the external frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, distributed as follows: 1 pair at the front on the raised platform inside the longitudinal beams, 1 pair at the very rear in the excavator bucket recess left and right, 1 pair at the front on the raised platform before the cranking inside the longitudinal beams, 1 pair at the rear of the low-bed before the drive-up slope in the excavator bucket recess left and right Towing Device: * Fixed towing drawbar with approx. 50 mm heavy-duty towing eye, cranked design, silent bushing mounting, drawbar holding spring with tensioner * Truck coupling height from approx. 775 mm to 975 mm * Drawbar length approx. 1,800 mm Support Device: * 2 hydraulic rear supports, operated individually, controls housed in a separate stainless-steel box Axles: * SAF air suspension low-bed axles with drum brakes, load capacity approx. 11 t/axle, S-cam brake approx. 300/200 mm, automatic brake adjusters Wheels: * 16 tyres 245/70 R 17.5, 146/146F, brand Conti HTR2 (tyre load capacity approx. 12 t/axle) Brake System/Suspension: * Brake system per ECE regulation R13, two-line pneumatic system * Brake system manufacturer Wabco EBS system 4S3M, 1st and 3rd axles sensed * RSS/RSP – stability control programme * Spring-loaded parking brake on the 3rd and 4th axles * Aluminium air tanks for total weight 44 t * Brake/air connection lines with two separate coupling heads, yellow/red * EBS/ABS connection cable * Tension rubber as holder for EBS and electrical connectors * Air suspension with lift and lowering device, operated separately at front and rear * Automatic leveling to programmed driving height from 15 km/h Assistance/safety systems: * SWIT – Schwarzmüller Intelligent Telematics Floor: * Softwood floor, approx. 50 mm, impreg