Fliegl 4-Achs Tiefladeanhänger Vts 400 Par/Hydr nakup rabljenega (43.584)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT44003001078, lastna masa: 8.900 kg, največja dovoljena obremenitev: 31.100 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, širina tovornega prostora: 3.000 mm, skupna dolžina: 11.940 mm, skupna širina: 3.000 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, barva: srebrn, Leto izdelave: 2026, Oprema: osrednja vrtljiva plošča, Pozor, arhivske slike! #Podvozje nizkopodne prikolice Jeklena, varjena konstrukcija Nljdpfo Aavxdjx Ag Ueh Vrtljiva ploščad z robustnim krogličnim ležajem Zadnja opora, zložljiva 2 stranski klini s pritrdilom Bočna zaščita proti trčenju, aluminijasta Ščitniki proti brizganju zadaj po celotni širini (ne v povezavi z nosilcem za viličar) Polovični blatniki 1. in 2. osi z zaščitnimi elementi proti brizganju za vsako osjo, Zaščitni elementi proti brizganju pred in za 3. in 4. osjo Kopa za bager nad zadnjima osjama, sega do zadnjega dela, dolžina približno 1800 mm, širina približno 650 mm in globina približno 150 mm, 2 para pritrdilnih lukenj, vsaka do 5 ton, v kopi za bager, ob stranskem vzdolžnem okvirju, približno 300 mm od sprednjega dela in približno 200 mm pred zadnjim nagnjenim delom 1 plastični orodjarni predal, š=600 / v=425 / g=460 mm, zapiralni Škatla za shranjevanje, vgrajena v zgornji del tal, z zamaškom, Š=720 mm / D=520 mm / G=170 mm Stranski podaljški, raztegljivi do 3000 mm (ne v zadnjem nagnjenem delu) (Širina sledi prevoženih gradbenih strojev ali vozil ne sme biti večja od zunanje širine okvirja, ki znaša 2.550 mm) Prostor za shranjevanje lesenih plošč pod nizkopodno površino Lesene plošče, 70 mm za podaljšek do 3000 mm #Pritrdilne točke nizkopodne prikolice 1 par pritrdilnih odprtin v vzdolžnem nosilcu, vgrajenih v zgornji del, vsaka do 10 ton 4 pari pritrdilnih lukenj v zunanjem okvirju, vsaka do 5 ton (pritrdilni točki za zatezne pasove) 9 parov pritrdilnih nastavkov na zgornji in stranski strani zunanjega okvirja, vsak do 10 ton 3 pari zložljivih pritrdilnih točk, dodatno, vsaka do 10 ton 1 x v zgornjem delu 1 x na začetku nizkopodne prikolice, vgrajeno v vzdolžne nosilce 1 x za zadnjo osjo, vgrajeno v tla #Naprava za priklop prikolice, vrtljiva ploščad Prijemna vilica s preizkušenim 50-milimetrskim priključkom Nastavitev višine prijemne vilice s pomočjo vzmeti #Osi in vzmetenje Osnova z bobnasto zavoro, po izbiri proizvajalca "Laserjsko merjenje osi/podvozij", s čimer se zmanjša obraba pnevmatik in poraba goriva Listnata vzmet s konstrukcijo jeklo-guma brez vzdrževanja in mehanskim izravnavanjem obremenitve osi spredaj in zadaj #Kolesa in pnevmatike 235 / 75 R 17,5" Jeklena platišča, dvojna konfiguracija, tovarniška srebrna barva "TPMS" sistem za nadzor tlaka v pnevmatikah v skladu s standardom ECE R 141, prikazovalnik na zaslonu v vlečni enoti, preko sistema EBS #Zavorna naprava Dvovodni zračni zavorni sistem Zavora na vzmet, parkirna zavora 2 priključka za zavoro, ki se ne morejo zamenjati 12-24 voltov EBS, elektronski zavorni sistem s priključkom EBS spredaj Zaznavanje obremenitve osi preko signala EBS-Canbus, za prikaz na zaslonu v kabini voznika #Elektrika 12-24 voltov, večkomorne luči LED, stranske rumene LED luči, osvetlitev registrske tablice LED Stranske rumene LED luči, sinhronizirane z smerniki ("Utripajoče stranske luči") 2 beli pozicijski luči spredaj, LED 2 beli/rdeči luči za držanje v vozni smeri zadaj, LED 2 x 7-polni priključki, ki se ne morejo zamenjati, spredaj 1 LED luč za opozarjanje, z nosilcem 2 para opozorilnih plošč, osvetljene z LED in raztegljive do 3000 mm #Pod Zgornji del spredaj s jekleno/valovito pločevino, za tem pa s približno 70 mm debelim mehkim lesom, v okolici koles jeklena/valovita pločevina Zadnji nagnjeni del s 70 mm mehkim lesom #Dostopne rampe Jeklene rampe, dolžina 3000 mm, širina 750 mm, stransko pomične Dodatna varnost rampe, zložljiva na spodnji strani Pokrite z lesom Hidravlično upravljanje p

Stanje: novo, največja dovoljena obremenitev: 31.920 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New Fliegl 4-Axle Low Loader Trailer with Ramps, Model VTS 400 Gross weight: 24,000kg / 40,000kg Unladen weight: 8,080kg Payload: 15,920kg / 31,920kg Total length: 11,940mm Total loading length: approx. 10,410mm; Gooseneck: approx. 2,490mm; Loading platform incl. rear bevel: approx. 7,920mm Width: 2,550mm Loading height: 900mm Additional information plus delivery/preparation from stock location 26639 Wiesmoor: €1,280.00 net Leasing offer: term 48 months, down payment only VAT, residual value 40% Monthly instalment EUR 759.00 Chassis Low Loader Trailer Steel welded construction Turntable with heavy-duty ball-bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminium side underrun protection Full-width rear spray flap Half-shell mudguards on axle 1 + 2 with anti-spray flaps behind each axle Anti-spray flaps before and behind axles 3 and 4 Excavator arm recess over rear axles, stretching to the rear, approx. 1,800mm long, 650mm wide, 150mm deep 2 pairs of lashing holes (5t each) in the excavator arm recess, side-mounted on the longitudinal frame, approx. 300mm from the front and approx. 200mm before the rear bevel 1 plastic toolbox, w=600mm / h=425mm / d=460mm, lockable Storage box recessed into the gooseneck floor with lid, w=720mm / l=520mm / d=170mm Extendable widenings to 3,000mm (not at rear bevel) (Note: the track width of machines or vehicles being transported must not exceed the outer frame width of 2,550mm) Wooden plank compartment under the low-bed platform 70mm wooden planks for extension to 3,000mm Low loader lashing points 1 pair of lashing cutouts sunk in the longitudinal beam at the front of the gooseneck, 10t each 4 pairs of lashing holes in external frame (5t each, suitable for tension belt attachment) 9 pairs of lashing mushrooms set into the external frame above and on the sides, each 10t 2x front on gooseneck 7x low-bed area 1st lashing point 250mm from front, last max. 250mm from rear, max distance between lashing points 1,100mm 3 additional pairs of folding lashing eyes, 10t each: - 1x on gooseneck (protruding) - 1x inside start of low-bed area in longitudinal beams - 1x recessed in floor behind last axle Towing arrangement, turntable trailer Drawbar with certified 50mm draw eye Drawbar height adjustment via spring Axles & Suspension Drum brake axles, manufacturer’s choice Nljdpfx Asvv D Ixjg Uoh Chassis/axle laser alignment (reduces tyre wear and fuel consumption) Air suspension with raise & lower valve + auto reset function Wheels and tyres 235/75 R 17.5”, manufacturer’s choice Steel twin wheels, factory silver Braking system 2-line pneumatic brake system Spring-loaded parking brake Axle load detection via EBS CAN-Bus signal (for in-cab display, truck must be pre-equipped, not a calibrated scale) Vehicle stability system 2 foolproof coupling heads at the front, with connecting lines to tractor unit 12-24V EBS (Electronic Braking System) with EBS plug at the front and connecting cable (Knorr brand) Note: Trailer must only be towed by towing vehicles capable of ensuring full ABS functionality! Electrics 12-24V, multi-chamber LED lamps, amber LED side markers, LED license plate lighting (Note: On certain tractor units, malfunction messages may appear even if operational) 2 white position lights at the front (LED) 2 white/red contour marker lights at the rear (LED) 2x 7-pin foolproof connectors at the front

Stanje: novo, največja dovoljena obremenitev: 31.100 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.520 mm, Gross weight: 24,000kg / 40,000kg Curb weight: 8,900kg Payload: 15,100kg / 31,100kg Total length: 11,940mm Loading length: 10,410mm total, 2,490mm gooseneck, 7,920mm loading deck including rear bevel Width: 2,520mm Loading height: 900mm Further information: plus pre-carriage / provision ex stock location 26639 Wiesmoor: €1,280.00 net Steel welded construction Turntable with heavy-duty ball-bearing slewing ring Foldable rear support Wheel chocks with holder Aluminium side underrun protection Rear mudflaps across the full width (not in combination with forklift holder) Half-shell fenders on 1st and 2nd axles with anti-spray mudflaps behind each axle Anti-spray mudflaps in front of and behind 3rd and 4th axles Excavator arm recess over rear axles to the rear, approx. 1,800 mm long, approx. 650 mm wide, approx. 150 mm deep 2 pairs of lashing holes (5 t each) in the excavator recess at the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 storage box embedded in gooseneck floor with lid, W=720 mm / L=520 mm / D=170 mm Extendable width to 3,000 mm (not in rear bevel) (Track width of machines/vehicles to be transported must not exceed outer frame width of 2,550 mm) Storage compartment for timber planks under low-bed platform 70 mm timber for widening to 3,000 mm Low loader lashing eyes 1 pair of lashing cut-outs at the front longitudinal member in gooseneck, each rated 10 t 4 pairs of lashing holes in the outer frame, each 5 t (lashing strap attachment) 9 pairs of recessed lashing mushrooms in the outer frame, top and side, each 10 t 2 x front on gooseneck Nlsdorducpepfx Ag Ush 7 x in lowered bed First lashing eye 250 mm from the front, last max. 250 mm from the rear, spacing not greater than 1,100 mm 3 pairs of additional folding lashing eyes, each 10 t: 1 x on gooseneck (protrudes) 1 x at beginning of low bed, recessed in longitudinal rails 1 x behind the last axle, recessed in the floor Trailer tow device Drawbar with certified 50 mm towing eye Drawbar height adjustable by spring Axles & suspension Drum brake axles, manufacturer's choice Axles/chassis laser aligned—reduces tire and fuel wear Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (equalisation rocking beams) Wheels and tires 235/75 R 17.5" manufacturer's choice Steel rims in twin configuration, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake 2 foolproof coupling heads at the front with connection leads to tractor unit 24 Volt ABS and ALB, with ABS connector at front, with connecting cable Note: The trailer may only be towed by tractors supporting ABS function! Electrics 12–24 volt, multi-chamber LED lamps, side yellow LED marker lights, LED license plate lights (note: some tractors may show false diagnostics despite correct function) 2 white position lights at the front, LED 2 white/red lane marker lights at the rear, LED 2 x 7-pin foolproof connectors at the front, with connecting cable 1 LED beacon with holder, switched via position light (removable beacon) 2 pairs of warning plates, double LED illuminated and extendable to 3,000mm Floor Gooseneck front with steel/checker plate covering then approx. 70 mm softwood floor, in the wheel arch area steel/checker plate covering Rear bevel with 70 mm softwood floor A

Stanje: novo, največja dovoljena obremenitev: 31.920 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New vehicle: Fliegl 4-axle low-loader trailer with ramps, model VTS 400 Gross weight: 24,000 kg / 40,000 kg Unladen weight: 8,080 kg Payload: 15,920 kg / 31,920 kg Overall length: 11,940 mm Loading length: total approx. 10,410 mm; neck approx. 2,490 mm; loading bed incl. rear taper approx. 7,920 mm Width: 2,550 mm Loading height: 900 mm Further information: Plus pre-freight / preparation ex stock 26639 Wiesmoor: €1,280.00 / net Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball race ring Foldable rear support Njdpfxsxrx Nle Ag Uolh 2 wheel chocks with holders Side underrun protection, aluminium Full-width rear mud flap Half-shell mudguards, 1st and 2nd axles with anti-spray flaps behind each axle, Anti-spray flaps in front of and behind 3rd and 4th axles Excavator stick trough over rear axles to the rear, approx. 1,800 mm long, 650 mm wide, 150 mm deep 2 pairs of lashing holes, each 5 t, in the excavator stick trough on the longitudinal frame, approx. 300 mm from the front and 200 mm in front of the rear slope 1 plastic toolbox, w=600 mm / h=425 mm / d=460 mm, lockable Storage box recessed in the neck floor with lid, w=720 mm / l=520 mm / d=170 mm Extendable outriggers to 3,000 mm (not for rear slope) (Track width of construction machinery/vehicles to be transported must not exceed external frame width of 2,550 mm) Storage compartment for wooden planks under the low-bed deck Wooden planks, 70 mm, for extension to 3,000 mm Lashing points, low-loader: 1 pair of lashing cutouts in the front longitudinal beams, embedded in the neck, each 10 t 4 pairs of lashing holes in the outer frame, each 5 t (for attaching ratchet straps) 9 pairs of lashing mushrooms, embedded in and above the outer frame, each 10 t: - 2 × on the neck - 7 × in the low-bed section First lashing point 250 mm from the front, last max. 250 mm from the rear; lashing point spacing max. 1,100 mm Additionally, 3 pairs of folding lashing eyes, each 10 t: - 1 × on the neck (protruding) - 1 × at the start of the low-bed inside the longitudinal beams - 1 × in the floor behind the last axle Drawgear, turntable trailer: Drawbar with certified 50 mm eye Drawbar height adjustment via spring Axles & Suspension: Drum brake axles, per manufacturer’s choice "Axles/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension with lift & lower valve + auto-reset function Wheels and Tyres: 235 / 75 R 17.5", per manufacturer’s choice Steel twin wheels, factory silver Braking system: 2-line air-operated brake system Spring-loaded parking brake Axle load detection via EBS CAN bus signal for display in truck cab (truck must be equipped accordingly; not a calibrated scale) Vehicle stability system: 2 non-interchangeable coupling heads at the front, connection lines to the tractor 12-24V EBS, electronic braking system with EBS socket at the front, including connecting cable (Knorr brand) Attention: The trailer may only be towed by vehicles that guarantee ABS functionality! Electrics: 12-24V, multi-chamber LED lights, side LED marker lights (yellow), LED license plate lighting (Note: Some towing vehicles may display incorrect errors despite proper function) 2 white front position lights, LED 2 white/red rear lane marker lights, LED 2 × 7-pin non-interchangeable sockets at the front, with connection cable 1 LED rotating beacon with bracket, switchable via sidelights (removable beacon) 2 pairs...

Stanje: rabljeno, največja dovoljena obremenitev: 29.940 kg, konfiguracija osi: > 3 osi, prva registracija: 03/2011, 4-osni prikolica z nizko nosilnostjo Feitzinger VTS 400 z največjo dovoljeno maso 40.000 kg in lastno težo 10.060 kg, s sistemom vzmetenja na listnih vzmeteh. Nagibna rampa, zložljiva s pomočjo hidravlike. Stanje: dobro. Stanje pnevmatik: 60-80 %. --- Tehnične specifikacije: Splošno: * Kratka opis: Feitzinger VTS 400, 4-osna prikolica z nizko nosilnostjo, s sistemom vzmetenja na listnih vzmeteh in zložljivo rampo. * Dovoljena skupna masa vlečne enote: 40.000 kg. Kabina: * Hladilnik: Ne. Motor: * AdBlue: Da. Prenos: * Retarder: Ne. Podvozje: * Vzmetenje: Vzmetenje na listnih vzmeteh. * Litje platišč: Ne. * Dvignjena os: Ne. Njdpez Dzi Nefx Ag Uolh * Krmiljena os: Ne. Prijeklica: * Prijeklica za invalide: Ne. Dokumentacija: * Lastna teža: 10.060 kg.

Stanje: rabljeno, največja dovoljena obremenitev: 31.700 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, prva registracija: 08/2022, dolžina tovornega prostora: 7.920 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 11.940 mm, skupna širina: 2.520 mm, Skupna masa: 24.000 kg / 40.000 kg Lastna masa: 8.300 kg Nosilnost: 15.700 kg / 31.700 kg Skupna dolžina: 11.940 mm Dolžina tovornega prostora: skupaj približno 7.920 mm Širina: 2.520 mm Nsdpfx Ajz Am U Deg Uolh Višina tovornega prostora: 900 mm Dodatne informacije: - pocinkano - vzmetenje s paraboličnimi vzmetmi - hidravlične rampe, jeklo, prevlečene z lesom, stransko pomične - predal za orodje - velik komplet priveznih pasov - opozorilni znaki spredaj in zadaj - plastičen predal za orodje - zadnji oporni sistem, zložljiv - korito za bager, ki se začne nad zadnjo osjo in sega do zadnje strani, približno 1.800 mm x 650 mm, približno 150 mm globoko - razširitev na 3 m - predal za orodje z lesenimi deskami pod tovorno površino

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT44001000966, lastna masa: 9.400 kg, največja dovoljena obremenitev: 30.600 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, prva registracija: 10/2010, dolžina tovornega prostora: 7.145 mm, širina tovornega prostora: 2.750 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 12.120 mm, skupna širina: 27.500 mm, skupna višina: 900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5", barva: rdeča, These images are for reference only! Gross weight perm. / technical: 24,000 / 40,000 kg Payload perm. / technical approx.: 14,600 / 30,600 kg Axle load perm. / technical: 24,000 / 40,000 kg Unladen weight (base version) approx.: 9,400 kg +/- build tolerance Overall length approx.: 12,120 mm Overall width max.: 2,750 mm Neck length approx.: 2,850 mm Low loader platform length in driving lane area incl. rear bevel approx.: 7,145 mm Rear bevel length approx.: 850 mm Frame width approx.: 2,750 mm Loading height in the low bed (loaded) approx.: 900 mm Tow height approx.: 950 mm Drawbar length approx.: 1,700 mm Chassis Low Loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Side underrun protection, aluminium 1 plastic toolbox Extendable widenings to 3,250 mm (not at rear bevel) (tracking width of transported construction machines or vehicles must not exceed outer frame width of 2,750 mm) Central storage compartment for wooden planks 70 mm wooden planks for widening to 3,000 mm 2 pairs of stake pockets in the low bed, integrated in the floor longitudinal beams Lashing rings, low loader: 2 pairs of lashing rings on the neck, each 5 t 1 pair of lashing rings in the rear bevel 4 recessed lashing rings, placed centrally in the floor 2 pairs of key slot profiles in the driving lane, for longitudinal guide rails and as additional lashing points 6 pairs of lashing mushroom anchors in the low bed outer frame, each 10 t 5 pairs of stake pockets in the outer frame of the low bed 4 additional pairs of 10 t lashing rings: 1 on the neck 3 recessed in the floor of the low bed Drawbar coupling, turntable trailer: Drawbar with tested 50 mm towing eye Axles + suspension: Drum brake axles Parabolic spring suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization front and rear (rocker leveling) Wheels and tires: 235 / 75 R 17.5" Steel rims, twin arrangement, factory silver Brake system: 2-line air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front with connection lines for towing vehicle ABS and ALB, with ABS connector at front, with connection cable Attention: The towed trailer may only be pulled by towing vehicles that ensure proper function of the ABS! Floor: Neck area with steel/chequer plate flooring then 70 mm softwood floor, wheel recesses with steel/chequer plate flooring Rear bevel with 70 mm softwood floor Access ramps: Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber surface Hydraulically operated via tractor PTO Operating instructions: For 10,000 kg axle load, a special permit is required, only indivisible loads permitted!!! Note! Overlength and excess width, special permanent approval required. For applications for special permits for heavy-duty transport, an axle load display is required for air-suspended vehicles! This applies to all deviations from § 34 StVZO (axle load and permissible gross weight exceedance) that require a special permit under § 70 StVZO. Nljdpoyxq A Hsfx Ag Ush The declared gross weight is technically feasible; depending on the load, the gross vehicle weight may not be achievable while observing permissible axle, support, and saddle loads. (Poor driving and trailing behavior possible due to incorrect load distribution) These images are for reference only!

Stanje: rabljeno, največja dovoljena obremenitev: 31.880 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, prva registracija: 02/2015, Črna prikolica z 4 osmi, pocinkana, z nizko nosilno ploščjo in hidravličnimi rampami, razširjiva na 3 m, z žlico za bager. Stanje: glede na starost, dobro. Pnevmatike: 60-80 %. --- Tehnične specifikacije: Splošno: * Kratka opis: prikolica z nizko nosilno ploščjo in hidravličnimi rampami, 4 osi, pocinkana, razširjiva. Kabina: * Hladilnik: Ne. Motor: Nedpez Dzi Ajfx Ag Uelh * AdBlue: Da. Menjalnik: * Retarder: Ne. Podvozje: * Aluminijasta platišča: Ne. * Dvignjena os: Ne. * Usmerjevalna os: Ne. Povezava z vlečnim vozilom: * Povezava za prikolice za invalide: Ne. Dokumentacija: * Prazna teža: 8.120 kg.

Stanje: rabljeno, največja dovoljena obremenitev: 31.880 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, prva registracija: 02/2015, Leto izdelave: 2015, Schwarzmüller, prikolica s 4 osmi, pocinkana, nizkotilna z hidravličnimi rampami, razširjiva na 3 m, s žlico za izkop. Stanje: glede na starost, dobro. Pnevmatike: 60–80 %. Nodpjz D Rl Hjfx Ag Uelh ----Tehnične specifikacije: Splošno: ? Kratka opis: Nizkotilna prikolica s 4 osmi in hidravličnimi rampami, razširjiva, pocinkana. Kabina: ? Hladilnik: Ne. Motor: ? AdBlue: Da. Prestavna škatba: ? Zaviranje z retarderjem: Ne. Podvozje: ? Litje platišč: Ne. ? Dvigalna os: Ne. ? Vodena os: Ne. Sedelna sklopka: ? Sedelna sklopka za invalide: Ne. Dokumenti: ? Prazna teža: 8.120 kg.

Stanje: novo, največja dovoljena obremenitev: 30.010 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New vehicle: Fliegl 4-axle low-loader trailer with wheel recesses and split ramps, type VTS 400 RM Lease-purchase offer: Term 48 months, down payment only the VAT, residual value 40% Monthly rate: EUR 899.00 Njdpotrizkefx Ag Uslh Vehicle / Body: Low-loader First registration: New vehicle Gross weight: 24,000 kg / 40,000 kg Unladen weight: 9,990 kg Payload: 14,010 kg / 30,010 kg Overall length: 12,000 mm Loading length: total approx. 10,000 mm, gooseneck approx. 2,850 mm, load area including rear bevel approx. 7,150 mm Width: 2,550 mm Loading height: 900 mm Further information Low-loader trailer chassis Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear supports Wheel chocks with holders Aluminum side underrun protection Rear spray flap across the entire width Half-shell mudguards on 1st and 2nd axle with anti-spray flaps behind each axle, anti-spray flap behind 4th axle Excavator arm recess above the rear axles, extending to the rear, approx. 1,800 mm long, approx. 650 mm wide, and approx. 150 mm deep 2 pairs of lashing holes (5 t each) in the excavator arm recess, lateral on the main frame approx. 300 mm from the front and approx. 200 mm before the rear bevel Spare wheel carrier for 1 spare wheel, upright on the gooseneck right at the front. Spare wheel, make identical to the main tires, steel rim Storage box recessed in the gooseneck floor with lid; dimensions W = 720 mm / L = 520 mm / D = 170 mm 1st pair of wheel recesses after the gooseneck, recessed in the low-bed lane area, ramped for entry, bottom length approx. 1,600 mm, depth approx. 400 mm. Note: Frame in the main beam area is 400 mm higher than the wheel recess 2nd pair of wheel recesses between the axles, recessed in the low-bed lane area, ramped for entry, bottom length approx. 600 mm, depth approx. 300 mm. Note: Frame in the main beam area is 300 mm higher than the wheel recess Extendable width up to 3,000 mm (not extendable in the rear bevel and not in the lower wheel recesses) (track width of the construction equipment or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden planks below the low-bed area 70 mm wooden planks for extension to 3,000 mm Lashing eyes on the low-loader 1 pair of lashing eyes, recessed in the front of the gooseneck, 5 t each 4 pairs of lashing holes in the outer frame, 5 t each (for lashing straps) 8 pairs of lashing rings, integrated on top and side of outer frame, 10 t each 2 at the front on the gooseneck 6 in the low bed First lashing point 250 mm from the front and last max. 250 mm from the rear, spacing between lashing points not greater than 1,100 mm 5 pairs of stake pockets integrated in the outer frame, inside 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) 1 pair of folding lashing eyes, additionally recessed in the floor, 10 t each 1 inside next to the main frame at the start of the low bed 2 pairs of additional folding lashing eyes, 10 t each 1 on the gooseneck (protrudes over edge) 1 behind last axle, recessed in floor Drawbar coupling / turntable trailer hitch Towing bar with certified 50 mm towing eye, towing eye inclined 8° D-value at least 160 kN Axles & suspension BPW drum brake axles "Axle/chassis laser alignment" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical front axle load equalization (rocker balance) Wheels and tires 235 / 75 R 17.5" Manufacturer's choi

Stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, lastna masa: 6.575 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 07/2011, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.300 mm, skupna dolžina: 13.650 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, stanje pnevmatik: 30 odstotek, medosna razdalja: 1.360 mm, Leto izdelave: 2011, Oprema: ABS, Rabljen odprt polpriklopnik Jeklena sprednja stena z izbočenjem za dolge jeklene profile Nsdpfx Agoy Ercbs Uolh Tla okrepljena z jeklenimi profili Stranski žepki za stebričke Skladiščna škatla za vstavljive stebričke

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, skupna masa: 24.000 kg, konfiguracija osi: > 3 osi, višina nakladalnega prostora: 900 mm, skupna dolžina: 11.940 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 r 17,5, stanje pnevmatik: 100 odstotek, Further Information Chassis Low-loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Side underrun protection made of aluminium Njdpfji Ri Daex Ag Uelh Full-width rear mudflap Half-shell fenders on 1st and 2nd axle with anti-spray mudflaps behind each axle; anti-spray mudflaps in front of and behind 3rd and 4th axle Excavator arm recess over the rear axles, starting to the rear, approx. 1800 mm long, approx. 650 mm wide, and approx. 150 mm deep, 2 pairs of lashing holes each rated 5 t located laterally in the excavator arm recess in the main chassis, approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox with shelf, w=620/h=360/d=440 mm, lockable with a padlock (Padlock not included) 1 storage box let into the gooseneck in the floor with lid, w=720 mm/ l=520 mm / d=170 mm Extendable width to 3,000 mm (not at the rear bevel) (the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) 70 mm timber planks for widening to 3,000 mm Storage compartment for timber planks under the loading platform Lashing rings low-loader (40 lashing possibilities) 1 pair of lashing rings on gooseneck, each 5 t 9 pairs of lashing mushrooms recessed into the outer frame, top and side, each rated 10 t 2 x in the front on the gooseneck 7 x in the low-bed 6 pairs of lashing holes in the outer frame of the low-bed, each rated 5 t (for lashing strap hooks) 3 additional pairs of folding lashing rings, each rated 10 t 1 x inside beside the main frame at the beginning of the low-bed 1 x on the gooseneck (protruding) 1 x recessed into the floor behind the last axle Drawbar coupling for turntable trailer Drawbar with certified 50 mm towing eye, towing eye inclined at 8°, D-value at least 160 kN Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (rocker equalisation) Wheels and Tyres 235 / 75 R 17.5 manufacturer’s choice Steel rims, twin mounting, factory silver Brake System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, including connection lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connection cable Electrics 24 volt, multi-chamber lamps, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connecting cable 1 LED beacon with holder, operated via parking light (beacon removable) 2 pairs of warning boards, double LED illuminated and extendable to 3,000 mm Flooring Gooseneck at front with steel/chequer plate floor Then with 70 mm softwood floor, in wheel arch area steel/chequer plate covering Rear bevel with 70 mm softwood floor Loading Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber decked Hydraulically operated via tractor PTO with restrictor, control located on the left side at the front Hydraulic connection with SVK connector NW 10/3, incl. connecting hose Registration Country/Plates Registration country: Germany 24/7 Service Hotline Prepared for two-line number plate holder Contour marking with reflective strips according to ECE R 048, side white and rear red Warning plate according to ECE – 70 Paintwork Chassis hot-dip galvanized including passivation, 15-year warranty again

Stanje: novo, največja dovoljena obremenitev: 30.310 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, NEW VEHICLE Fliegl 4-axle low loader with 2 pairs of wheel recesses and ramps Gross weight: 40,000 kg Payload: 30,310 kg Unladen weight: 9,690 kg Overall length: 12,000 mm Loading length: 10,000 mm Loading bed: 7,150 mm including 850 mm drive-on slope Loading height: 900 mm 1st pair of wheel recesses after drop in the loading bed, length at bottom approx. 1,600 mm, 400 mm deep 2nd pair of wheel recesses between the axles in the loading bed, length at bottom 600 mm, 300 mm deep Extensions to 3,000 mm, warning boards, rotating beacon, comprehensive lashing package 5 pairs of stake pockets in the outer frame Excavator arm recess, 1,800 mm long, 150 mm deep Drawbar 50 mm Air suspension with raise/lower valve, separately operable BPW drum brakes Nlodpfxjnzlg Ds Ag Ush Tyres: 235 / 75 R 17.5" Axle load detection via EBS CAN bus signal, Trailer Info Center Ramps: 2,800 mm x 750 mm, hydraulically operated Hydraulic lateral displacement Hire purchase offer: term 48 months, residual value 40%, down payment only the VAT on the installments, monthly payment EUR 970.00 net Vehicle available from 11.09.2023 from the Neumünster trade fair. Visit us at Nordbau - Stand West 121, right next to the main entrance. Further 3-, 4- and 5-axle low loaders new and used available immediately

Stanje: novo, konfiguracija osi: 3 osi, barva: sivo-črna, vrsta prenosa: mehanski, Colour: Natural, lift axle, electronic braking system (EBS), 1x 15-pin connection plug. Equipment: Slightly beveled new-design outer frame with “Load-Lock Profile” for lashing straps, 13 additional pairs of lashing rings in the outer frame, each rated 5 t for a total of 24 t. Two-speed landing gear, single-sided operation, with semi-circular lower section and straight forklift underrun protection made of steel on the outer frame (sides and rear). One spare wheel carrier for one single wheel, with wheel fastening kit. 1 plastic toolbox (650 mm x 520 mm x 670 mm). 7 pairs of drop-in stake pockets (83 x 83 mm) integrated into the outer frame. SAF disc brake axles with 430 mm air suspension. First axle is an automatic lift axle, including forced lowering and starting aid, activated with third brake circuit. Wheels and tires: 6 x 385/65 R22.5, brand manufacturer; 6 steel rims, factory silver. Flooring: approx. 30 mm phenolic plywood, cross joints with Omega insert for high point loading, forklift axle load up to max. 7,100 kg. Front wall / corner posts: 25 mm aluminium hollow profile, 1,950 mm high; steel corner posts in high-volume version plus 2 center supports as “Crash Blocker” (mounted inside lower area at approx. 140 mm). Sideboards: 25 mm aluminium hollow profile, 700 mm high. Paintwork: chassis hot-dip galvanized including passivation ("15-year anti-corrosion warranty"). Aluminium sideboards anodized. Subject to errors and changes. Nledpfx Agstcwmie Ueh

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 14.300 kg, največja dovoljena obremenitev: 9.700 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 12.000 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 r 17,5, stanje pnevmatik: 100 odstotek, Rešitev po meri za transport Konfigurirajte svoje vozilo Fliegl glede na vaše zahteve. Prikazano vozilo je zgolj primer. Proizvodnja in oprema se izvedeta individualno po želji stranke. Dodatne informacije Podvozje Jeklena varjena konstrukcija Vrtljiva plošča z robustnim krogličnim ležajem Zložljivo zadnje podpiranje Njdei Ri I Njpfx Ag Ujlh 2 zagozdi za kolesa + nosilec Bočna zaščita iz aluminija Zadnje blatne zavese po celotni širini Četrtinski blatniki pred 1. osjo Izkop za roko bagra nad zadnjimi osmi do zadka, približno 1800 mm dolga, približno 650 mm široka in približno 150 mm globoka, 2 para pritrdilnih odprtin po 5 ton v izkopu roke bagra ob straneh vzdolžnega okvirja približno 300 mm od spredaj in približno 200 mm pred zadnjim nagibom 1 skladiščna škatla v poglobljenju tal z pokrovom, Š=720 mm/ D=520 mm / V=170 mm 1. par kolesnih izkopov za poglobitvijo na območju nizkega dna, z naklonom za vožnjo, dolžina spodaj približno 1600 mm, globina približno 400 mm. Opomba! Okvir na glavnem nosilnem območju je 400 mm višji od kolesne izkopa. 2. par kolesnih izkopov med osmi v nizkem dnu na območju voznih stez, z naklonom za vožnjo, dolžina spodaj približno 600 mm, globina približno 300 mm. Opomba! Okvir na glavnem nosilnem območju je 300 mm višji od kolesne izkopa. Pokrov za kolesne izkope, izvlečen iz glavnega okvirja, z lesenimi vložki. Razdalja od glavnega okvirja – nosilec do nosilca zunaj približno 1280 mm Razširitve izvlečne do 3000 mm, pri izlivih kolesnih izkopov zložljive (razširitev ni na zadnjem nagibu in ne na dnu kolesnih izkopov) Prostor za shranjevanje lesenih desk na sredini nakladalne površine ali pod nakladalno površino glede na tehnične možnosti Lesene deske 70 mm za razširitev na 3000 mm Pritrdilne točke nizkonosilca 1 par rin-pritrdišč spredaj v poglobitvi, vsaka za 5 ton 8 parov pritrdilnih gumbov zgoraj in ob straneh v zunanjem okvirju, vsaka za 10 ton 2 x spredaj v poglobitvi 6 x v nizkem dnu; prva pritrdilna točka 250 mm od spredaj in zadnja največ 250 mm od zadaj, razdalja med pritrdišči največ 1100 mm 5 parov obročastih pritrdilnih točk v zunanjem okvirju, vsaka za 5 ton (lahko se spremeni v žepe za kole) Priključek za prikolico – vrtljiva plošča Vlečna ojnička s preizkušenim vlečnim obročem 50 mm, z 8° nagnjenim vlečnim obročem Osovine in vzmetenje SAF bobnaste zavorne osi Z laserjem izmerjeno podvozje – za zmanjšanje obrabe pnevmatik in porabe goriva Zračno vzmetenje s funkcijo dviga in spuščanja, ločeno za spredaj in zadaj Kolesa in pnevmatike 235/75R17,5 po izbiri proizvajalca Jekleni platišči v dvojni izvedbi, tovarniško srebrni Zavorni sistem Dvovodna zračna zavora Vzmetno zadržana parkirna zavora Infocenter prikolice za prikaz podatkov o vozilu kot so osni tlak (ni overjene tehtnice) in števec kilometrov Prepoznavanje osnega tlaka preko signala EBS-Canbus, za prikaz na zaslonu v kabini, tovornjak mora biti ustrezno pripravljen, nobena instalacija na tovornjaku (ni overjene tehtnice) Stabilnostni sistem za vozila Duomatic priključek spredaj, z povezovalnim kablom na vlečno vozilo EBS, elektronski zavorni sistem z EBS priključkom spredaj in povezovalnim kablom Pozor: Priklopno vozilo se sme vleči le z vlečnimi vozili, ki zagotavljajo delovanje ABS! Elektrika 24 voltov, večkomorni LED luči z uporom, stranske rumene LED signalizacije, LED osvetlitev registrskih tablic, 2 bele pozicijske LED luči spredaj 2 belo/rdeči LED smerni lučki zadaj Dodatni LED delovni žaromet, zadaj, upravljan prek vzvratne luči 1 x 15-polni vtikač spredaj

Stanje: rabljeno, največja dovoljena obremenitev: 37.530 kg, skupna masa: 50.000 kg, konfiguracija osi: > 3 osi, prva registracija: 02/2012, naslednji pregled (TÜV): 11/2026, skupna širina: 3.000 mm, skupna višina: 3.780 mm, Oprema: ABS, * Gooseneck with foldable side walls * Low bed length: 11,950 mm - 15,450 mm * Low bed extendable in steps by 3,500 mm * Low bed width extendable by 460 mm * Hydraulically adjustable loading ramps (split, 2 parts) * Stake pockets * Wabco SmartBoard * 4 axles with twin tires * 1st axle liftable * 3rd + 4th axle with steering function * Wheel chocks ----* Tire size: 235/75R17.5 * Technical gross weight: 58,000 kg * Unladen weight: 12,470 kg * Overall length: 13,700–17,200 mm Nlsdpfey T Dyzjx Ag Ueh * Overall width: 2,540–3,000 mm * Safety inspection due: 05/2026 ----Vehicle number: 12062----Subject to errors and prior sale----Advertising and various lettering have been digitally removed.----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions—we will take care of everything. Among other services, we can offer you the following for an additional fee:----* Trade-in of your old vehicle * HU/Safety inspection * Complete export processing * Financing brokerage * Application for export license plates * Vehicle transfers * Vehicle registration * Recovery and vehicle transport ----?YOUR VTS TEAM

Stanje: rabljeno, Kubota KX037-4, kompakten bager, leto izdelave: 2024, delovne ure: 531 ur, mehanski sistem za hitro menjavo orodja MS03, buldožerska lopata, hidravlični čistilnik jarkov 1.200 mm, motor: Kubota [18 kW/25 KM], priključki za kladivo/grabljico (AUX I), teža: 3.695 kg, dobro stanje, takoj pripravljen za uporabo. Po želji vam pripravimo ponudbo za lizing ali financiranje. Gospoda Mihma (tel. ) vam z veseljem pomaga. Dodatne informacije najdete na naši spletni strani. Pridržujemo si pravico do spremembe cen in prodaje predhodno. Njdpfx Agjyfpxle Uslh = Dodatne informacije = Leto izdelave: 2024 Delovne ure: 531 Pogonska enota: gosenice Za dodatne informacije se obrnite na Tobiasa Eberta.

Stanje: rabljeno, prva registracija: 06/2018, Leto izdelave: 2018, Fliegl ZWP 180 ZWP 2-osna prikolica ∗KOT NOVA∗ ! Na voljo 4 kosi ! ● Datum prve registracije: 06/2018 ● Dimenzije vozila: 9.150 mm x 2.480 mm (D x Š) ● popolnoma vzmetena na zračni blazini ● sistem za dvigovanje/spuščanje ● ABS ● 2 x zračno vzmetena os BPW – 9 ton ● Največja dovoljena masa: 18.000 kg ● Lastna masa: 2.610 kg ● Nosilnost: 15.390 kg ● Gume spredaj/zadaj: 385/65 R22.5 ● Globina profila gume: 8/8 / 7/7 mm - Nemška vozila! - 1. lastnik! - Tehnični pregled / pregled plinskega sistema: po želji in po dogovoru z doplačilom: nov!! Pridržujemo si pravico do spremembe in napak! = Dodatne informacije = Nlodpfxszlwpde Ag Ueh Lastna masa: 2.610 kg Nosilnost: 15.390 kg Največja dovoljena masa: 18.000 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 9.900 kg, največja dovoljena obremenitev: 14.100 kg, skupna masa: 24.000 kg, konfiguracija osi: > 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Rešitev transporta po meri Konfigurirajte svoje Fliegl vozilo glede na vaše zahteve. Prikazano vozilo je primer. Proizvodnja in oprema sta prilagojena individualno po željah stranke. Dodatne informacije Šasija Varjena jeklena konstrukcija Obročni vrtljivi podstavek z močnim krožnim ležajem, vključno s potopljenim zabojiščem. Prednji del z vrtljivim podstavkom Zadnja, zložljiva podpora 2 zagozdi z nosilcem Bočna zaščita proti naletu iz aluminija Zadnja brizgalna zaščita čez celotno širino Razširitve izvlečne do 3.000 mm (ne velja za zadnji naklon) (Sled vozil ali gradbenih strojev za prevoz ne sme presegati zunanje širine okvirja 2.550 mm) Shranjevalni prostor za lesene pode na sredini tovorne površine Leseni podi debeline 70 mm za širitev na 3.000 mm Privezne točke za nizko prikolico 3 pari priveznih točk po 10 t spredaj, vgrajenih v tla 6 parov pritrdilnih gobic zgoraj in ob straneh zunanjega okvirja, po 10 t 1 x v predelu vratu ostale enakomerno razporejene, razmik največ 1.200 mm 1 x zadnja naklonska plošča 5 parov žepov za stebre v zunanjih okvirih, notranje mere 70 x 40 mm (lahko se predelajo za obroče za privez do 5 t, ni vključeno) Vlečna naprava, prikolica z vrtljivim podstavkom Vlečna kljuka s preizkušenim 40 mm vlečnim obročem Opomba! Pri 40 mm vlečnem obroču je največja dovoljena skupna masa tovornjaka 18.000 kg, sicer je potreben 50 mm obroč. Osi in vzmetenje SAF bobnaste zavore Laser merjene osi/podvozje za zmanjšanje obrabe pnevmatik in porabe goriva Parabolično vzmetenje z brezvzdrževalnim jekleno-gumijastim ležiščem in mehanskim izenačenjem osne obremenitve spredaj in zadaj (nihajna izravnava) Kolesa in pnevmatike 235 / 75 R 17,5 po izbiri proizvajalca Jeklena platišča v dvojni izvedbi, tovarniško srebrna Nlsdpfxsi Ri I Es Ag Ueh Zavorni sistem Dvovodna zračna zavora Vzmetno parkirna zavora 2 prednji varno zamenljivi priključni glavi z povezovalnimi cevmi do vlečnega vozila, ABS in ALB, ABS vtič spredaj, vključeno povezovalni kabel Pozor: Prikolica se sme uporabljati samo s vozili, ki zagotavljajo učinkovitost ABS sistema! Elektrika 24 V, večkomorni žarometi, bočne rumene LED luči 2 prednji beli pozicijski luči 2 zadnji belo/rdeči sledilni luči 2 x 7-polna varno izmenljiva vtiča spredaj s povezovalnim kablom, 1 LED rotacijska luč z nosilcem, vezana na pozicijsko razsvetljavo (luč snemljiva) 2 para opozorilnih tabel, dvojno LED osvetljene in izvlečne do 3.000 mm Tla Sprednji del jeklena tla, nato z 70 mm mehkega lesa, na predelu kolesnih lokov jeklena/rebrasta pločevina Zadnji naklon z 70 mm mehkega lesa Nakladalne rampe Jeklene rampe, dolžina 2.800 mm, širina 750 mm, bočno pomične premazane z lesom s pomočjo vzmetne podpore Navodila za uporabo Pri 10.000 kg osne obremenitve je potrebna izredna dovoljenja, dovoljeno je le neločljivo blago!!! Navedena skupna masa je tehnično možna; glede na tovor skupna masa pri upoštevanju dovoljenih osnih/pritiskov/sedlov ne bo vedno mogoča. Država homologacije/tablice Država homologacije: Nemčija 1x z Dekra certifikatom in poročilom (po §13 EG - FGV) 24/7-servisna linija pripravljeno za dvovrstična nosilca registrskih tablic Obrisna oznaka z odsevnimi trakovi po ECE R 048, bočno belo in zadaj rdeče Barvanje Okvir RAL 3002 karmin rdeč 10 let garancije proti prekoroziji Vlečna kljuka pocinkana ali črna, po izbiri proizvajalca Rampe vroče pocinkane Pozor: Arhivske slike!

Stanje: rabljeno, Leto izdelave: 2021, obratovalne ure: 1.255 h, Oprema: pogon na vsa štiri kolesa, Skoraj nov Atlas AR 400, letnik 2021, nosilnost pri iztegnjeni roki 3.550 kg / nosilnost pri pregibni roki 3.100 kg, motor s 4 cilindri, preklopna žlica približno 0,85 m³, vilice za palete, hidravlični hitromenjalni sistem, tretji hidravlični krog, razsvetljava, kabina, ogrevanje, maksimalna hitrost 20 km/h, delovnih ur: 1.255. Vozilo je lahko opremljeno z reklamnimi nalepkami ali napisi. SI86502 Nsdeya Sd Hopfx Ag Uolh Naša ponudba ne vključuje nove tehnične kontrole (TÜV). Če želite novo tehnično kontrolo, vam z veseljem pripravimo ponudbo naših partnerskih delavnic! Vozilo je lahko opremljeno z reklamnimi nalepkami ali napisi. Veljajo naši splošni prodajno-plačilni pogoji. Z veseljem za ta objekt pripravimo tudi ponudbo za financiranje ali leasing. Prosimo, kontaktirajte nas!

Stanje: rabljeno, prevoženi kilometri: 655.805 km, moč: 291 kW (395,65 KM), prva registracija: 09/2014, vrsta goriva: dizel, velikost pnevmatike: 355/50 R22.5, konfiguracija osi: 4x2, medosna razdalja: 3.800 mm, gorivo: dizel, barva: drugo, vrsta prenosa: samodejen, emisijski razred: Euro 6, skupna dolžina: 5.920 mm, skupna širina: 2.550 mm, dovoljena osna obremenitev (os 1): 8.000 kg, dovoljena osna obremenitev (os 2): 11.500 kg, Oprema: ABS, električno nastavljivo ogledalo, električno upravljanje oken, klimatska naprava, parkirni grelec, Splošne informacije Letnik izdelave: 2014 Registrska številka: 93-BFD-3 Tehnične informacije Število cilindrov: 6 Prostornina motorja: 10.837 cm³ Prednja os: Dimenzije pnevmatik: 355/50 R22.5; Največja obremenitev osi: 8000 kg Zadnja os: Dimenzije pnevmatik: 295/80; Največja obremenitev osi: 11500 kg Teže Lastna teža: 7.267 kg Dovoljena nosilnost: 12.233 kg Največja dovoljena masa: 19.500 kg Največja dovoljena vlečna masa: 50.000 kg Notranjost Nlodpfe Ad N U Tsx Ag Ujh Število sedežev: 2 Vzdrževanje Tehnični pregled (APK): veljaven do 06.2027

Stanje: dober (rabljeno), prevoženi kilometri: 321.208 km, moč: 300 kW (407,89 KM), prva registracija: 05/2009, vrsta goriva: dizel, konfiguracija osi: 4x2, gorivo: dizel, barva: rumena, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 4, vzmetenje: jeklo-zrak, Oprema: Bluetooth, EBS (Elektronski zavorni sistem), drugi rezervoar za gorivo, električno nastavljivo ogledalo, električno upravljanje oken, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, meglenke, tempomat, = Dodatne možnosti in dodatna oprema = - Aluminijast rezervoar za gorivo - EPS (elektronski program stabilnosti) - Hidravlični sistem za nagibanje - Platišča iz lahke zlitine - Filter trdnih delcev - Radio/predvajalnik CD-jev - Stranska vrata = Dodatne informacije = Letnik izdelave: 2009 Prednja os: vodena; vzmetenje: listnato vzmetenje Zadnja os: vzmetenje: zračno vzmetenje Lastna teža: 7.580 kg Nosilnost: 11.420 kg Dovoljena masa: 19.000 kg Tehnično stanje: dobro Vizualno stanje: dobro Referenčna številka: 18 Številka vozila: 18 Nljdpfx Agsy E Tzxe Uoh VOLVO FH500 / Globetrotter / Hidravlični sistem za nagibanje / Euro 4 / 352 tkm .: YV2ABP0A09B542674 Vzmetenje: listnato / zračno Menjalnik: avtomatski Klimatska naprava Motorna zavora Tempomat Emisijski standard EURO 4 Hidravlični sistem za nagibanje Ne prevzemamo odgovornosti za tiskarske in tipkarske napake, spremembe, vmesno prodajo in napake! = Podatki o podjetju = Ne prevzemamo odgovornosti za tiskarske in tipkarske napake, spremembe, vmesno prodajo in napake! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobilni telefon: gospa Sabine Faust E-pošta:

Stanje: rabljeno, največja dovoljena obremenitev: 15.620 kg, skupna masa: 24.000 kg, konfiguracija osi: > 3 osi, prva registracija: 08/2006, naslednji pregled (TÜV): 08/2026, Leto izdelave: 2006, Oprema: ABS, Prvi lastnik. Nljdpfx As Admygsg Uoh

Stanje: dober (rabljeno), prevoženi kilometri: 400.902 km, moč: 331 kW (450,03 KM), prva registracija: 02/2019, vrsta goriva: dizel, konfiguracija osi: 4x4, gorivo: dizel, zavore: retarder, barva: drugo, voznikova kabina: spalna kabina, vrsta prenosa: mehanski, število prestav: 12, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, število postelj: 1, Oprema: električno upravljanje oken, retarder, zapora diferenciala, = Dodatne možnosti in dodatna oprema = - 4x4 - Klima naprava - Listna vzmetenje Nsdpfxo Advzgo Ag Uslh - Hidravlika - Hidravlično nagibanje - Zračna vzmetenje - Blokada diferenciala - Pogonska gred = Dodatne informacije = Splošne informacije Število vrat: 2 Letnik izdelave: 2019 Kabin: enojna Registrska oznaka: 1VRY645 Tehnične informacije Število valjev: 6 Sprednja os: Blokada diferenciala; Krmilna os; Reduktor: zunanji planetni prenosi Zadnja os: Dvojna guma; Blokada diferenciala; Reduktor: zunanji planetni prenosi Znamka motorja: SCANIA Notranjost Število sedežev: 2 Stanje Tehnično stanje: dobro Optično stanje: dobro Poškodbe: brez Finančne informacije Cena: Na zahtevo

Stanje: dober (rabljeno), vrsta goriva: dizel, barva: drugo, prva registracija: 06/2020, = Dodatne možnosti in dodatna oprema = - Klima naprava = Opombe = Njdpfj Ad U Swox Ag Ujlh Splošno Država proizvodnje: JAPONSKA Stanje Tip odobritve CE: CE, EPA, TÜV = Dodatne informacije = Splošne informacije Letnik izdelave: 2020 Delovnih ur: 3.296 Pogon Vrsta pogona: gosenični Znamka motorja: KUBOTA Teže Maksimalna dovoljena masa: 4.775 kg Funkcionalnost Sistem za hitro menjavo priključkov: da Označba CE: da Stanje Tehnično stanje: dobro Vizualno stanje: dobro Finančne informacije Cena: Na zahtevo