Polpriklopnik Z Nizko Nakladalno Ploščadjo nakup rabljenega (42.554)

Stanje: rabljeno, največja dovoljena obremenitev: 24.640 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/1993, dolžina tovornega prostora: 12.700 mm, širina tovornega prostora: 2.500 mm, ? Hidravlične podporne noge ? Kolesne vdolbine ? 3 žepki za stebričke na vsaki strani ? 4 pritrdilne ušesce na vsaki strani ? Hidravlične rampe ? Bobnasta zavora ? Zračno vzmetenje ? Dvojna pnevmatika ? SAF osi Vse informacije brez garancije / Vmesna prodaja pridržana. Gujdpoxuykiefx Am Hsh

Stanje: novo, lastna masa: 9.300 kg, največja dovoljena obremenitev: 30.100 kg, skupna masa: 39.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) Godpfxjyxc Eye Am Heuh - 30 mm hardwood flooring Extendable loading platform: - Loading platform, extendable execution with rear bevel approx. 1,000 mm x 8° - 5 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - Cutouts in the outer frame of the platform for attaching tie-down straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tyres: - BPW axles, hydro-mechanically forced steering - Technical axle load: 12,000 kg - Air suspension with raise/lower valve - Axle tool kit - TPMS tyre pressure monitoring system according to ECE R 141 - Tyres: 235/75 R17.5 3PMSF Accessories included: - 2" kingpin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection strip - 2 wheel chocks with holder on the front wall - One spare wheel with holder in front of the front wall - Electro-hydraulic unit - Rear axle steering, operable from front and rear via cable remote control with push buttons, with axle single-track monitoring - European reflective warning plates (red-yellow) at the rear of the trailer - White reflective tape according to EU regulations on the sides and on the extension, red at the rear - Gooseneck and rear left and right brackets for warning signs, including socket - Sliding hook-in bar for ALU loading ramps at the rear of the vehicle - One bracket for a rotating beacon at the rear of the trailer - Galvanized folding supports under the rear bevel of the loading platform - One mudguard at the rear of the trailer - Operating manual and documentation on USB stick - Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump protection cover - Removable ALU side boards and tailgate on the gooseneck approx. 2,440 x 400 mm - The rear galvanized stanchions are removable (body length approx. 2,560 mm) - 3 pairs of WADER container pockets in the loading platform for 1x 20ft, 1x 30ft or 1x 40ft container - 6 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform - One INOX toolbox 1,500 x 390 x 810 mm under the loading platform, right side in direction of travel - Four warning signs, extendable by approx. 400 mm, approx. 423 x 423 mm with a position light - On the warning signs a bracket for a rotating beacon - Radio remote control for rear axle steering, in addition to cable remote control, with indicator lights on receiver for single-track monitoring - On the checker plate surfaces on the gooseneck and loading platform, a painted sand layer as anti-slip protection - Speed sticker 80 km/h at the rear and on both sides - Axle load gauge for determining axle loads, including load diagram

Stanje: rabljeno, največja dovoljena obremenitev: 26.500 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/1994, dolžina tovornega prostora: 13.030 mm, širina tovornega prostora: 2.600 mm, skupna širina: 2.600 mm, skupna višina: 4.000 mm, Ladebett: 8620 mm, Schräge hinten: 450 mm, Breite: 2600 mm, Breite: 3111 mm mit Verbreiterung, ausziehbare und/oder klappbare Verbreiterungen, Schwanenhals: 3960 mm, Ladehöhe Bett: ca. 880 mm, hydraulisch seitlich verschiebbare Auffahrrampen (LxB) 2900 x 830 mm, elektrische Hydraulikpumpe, Kabelfernbedienung, 2 x Schwerlast-Zurringe je Seite, 5 x Rungenstecktaschen je Seite, ausziehbare Warntafeln, Zentralschmieranlage, Stützwinden, drei Achsen hydraulisch zwangsgelenkt, Trommelbremsanlage, Luftfederung, Rundumkennleuchte, Rückfahrscheinwerfer, Fahrzeug kann mit Werbung beklebt und/oder beschriftet sein. SI85616 Unser Angebot ist generell ohne neue TÜV-Abnahme. Falls neue TÜV-Abnahme erwünscht, unterbreiten wir Ihnen gerne ein Angebot unserer Partnerwerkstätten! Fahrzeug kann mit Werbung beklebt und/oder beschriftet sein. Es gelten unsere allgemeinen Liefer- und Zahlungsbedingungen. Gerne erstellen wir Ihnen für dieses Objekt ein Finanzierungs- oder Leasingangebot. Bitte sprechen Sie uns an! Gedsw Sb Sqspfx Am Hjuh

Stanje: rabljeno, največja dovoljena obremenitev: 38.000 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2012, with air suspension, hydromechanical forced steering, single telescopic loading platform STZ-L Gooseneck - robust steel welded construction - designed loading platform 3,500 x 2,480 mm - hydromechanical forced steering (2-circuit steering) in flat construction (build height 235mm) with adjustable guide elements - ball-bearing turntable saddle plate with interchangeable 2" king pin and adjustable steering wedge Loading Platform - single telescoping, designed as external-internal tube construction with a 1,000 mm long fixed front section - locking of extendable stages via spring-loaded cylinders and conical bolts Running Gear - air-suspended 3-axle chassis, - BPW (Eco) axle unit, consisting of three hydromechanically forced-steered stub axles - axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - lifting and lowering valve as standard for lowering to min. 825 mm or raising to max. 1025 mm - loading height 1: 885 mm - loading height 2: 925 mm Vehicle Rear - straight design - short 1,000 mm rear overhang from the center of the last axle - mechanical rear support Brake System - 2-line dual-circuit compressed air brake system with diaphragm brake cylinders - automatic load-sensitive braking (ALB) - automatic slack adjusters (AGS) - parking brake via spring-loaded cylinders - anti-lock braking system (ABS) Special Equipment - central lubrication system "BekaMax" Gusdpfoyrzv Ajx Am Hsh - electric power unit - radio remote control Technical Data Gooseneck Loading platform (LxW): 3,500 x 2,480 mm Build height above fifth wheel: 235 mm Fifth wheel height loaded: 1,300 mm Loading Platform Loading area (LxW): 10,000 x 2,550 mm Telescopically extendable by 7,500 mm in stages up to (LxW) 17,500 x 2,550 mm Loading height loaded: 925 mm (+/- 100 mm) 2nd driving position: 885 mm (+140/-60 mm) Steering 1st to 3rd axle hydromechanically forced-steered (2-circuit steering)

Stanje: rabljeno, lastna masa: 8.550 kg, največja dovoljena obremenitev: 27.450 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2020, dolžina tovornega prostora: 12.800 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1 mm, vzmetenje: zrak, velikost pnevmatike: 245/70R17,5, barva: srebrn, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, 3 osi, zračno vzmetenje, 1. os dvižna, ABS (anti-blokirni sistem), hidravlične rampe, zadnje podpora, opore. 9 t osi, bobnaste zavore, višina nakladanja pribl. 880-950 mm, možno razširiti na 3.050 mm, dolžina nizkega ležišča 8.800 mm, dolžina labodjega vratu 4.000 mm, skupna masa s 3-osnim vlačilcem 42.000 kg, nosilnost 31.290 kg. Rezervno kolo na voljo za doplačilo! PODATKI O DODATNI OPREMI SO BREZ JAMSTVA, spremembe, vmesna prodaja in napake pridržane! Gujdpfx Amoyyc Eps Hoh

Stanje: rabljeno, največja dovoljena obremenitev: 21.130 kg, skupna masa: 34.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2024, naslednji pregled (TÜV): 11/2026, skupna širina: 2.540 mm, skupna višina: 1.980 mm, Oprema: ABS, Kässbohrer SLL 2-axle lowbed with hydraulic steering Highlight: Optionally available for rent as a complete unit together with the pictured truck. Manufacturer: Kässbohrer Type / Vehicle code: K.SLL 2 / 2H ? 18 / 20 Vehicle type: Lowbed semi-trailer Country of registration: Germany Brand: Kässbohrer Chassis color: RAL 3020 traffic red Dimensions & Weights - Overall length: 13,210 mm - Overall width: 2,540 mm - Fifth wheel height (H5): 1,250 mm - Platform height (unladen): 910 mm - Platform height (laden): 300 mm - Platform length: 6,810 mm - Extension: 5,550 mm - Gooseneck length: 3,600 mm - Rear swing door: 2,100 mm - Platform thickness: 200 mm - Wheelbase: 10,530 mm - Axle spacing: 1,360 mm - Unladen weight: approx. 12,873 kg (±3%) - Gross weight (40 / 60 / 80 km/h): 42,000 kg - Total axle load: 24,000 kg - Permissible kingpin load: 18,000 kg (40 / 60 / 80 km/h) ---Running Gear & Axles - 2 axles - 2 hydraulically steered axles - Axles: BPW - Suspension: Air suspension - Suspension stroke: 260 mm (190 mm / -70 mm) - Additional raising of driving level by 40 mm possible - Load gauge for axle load display - Semi-automatic axle centering with warning light sensor ---Brake System - WABCO EBS 2S/2M - ABS (Anti-lock Braking System) - RSS (Roll Stability Support) - Brake system in accordance with UN ECE R13 ---Electrics & Lighting - 24 V LED lighting system - 2 × 7-pin + 1 × 15-pin socket - LED brake lights - LED rear and fog tail lights - Electrical system in accordance with UN ECE R48 & ADR - Rear LED work lights (2 pieces, reverse gear dependent) - Rotating LED beacon (1 piece) ---Tyres & Rims - Tyre size: 245/70 R17.5 - Tyres: M+S - 3PMSF (winter suitable) - Tyre pressure monitoring system according to R141 - Number of wheels: 9 complete wheels - Rims: Steel rims (Kässbohrer choice) - Spare wheel holder: 1 piece on gooseneck ---Steering & Controls - Hydraulic steering on both axles - Control panel in vehicle - Remote control for external steering control - Multifunctional WABCO Smartboard - Axle load indicator - Suspension control - Tyre & brake wear monitoring - Breakdown & system monitoring ---Chassis & Frame - High-strength steel S700 MC (ISO 1726) - Welded bogie bed connection - Partial metallization (85% zinc / 15% aluminum) on outer frame & gooseneck - Adjustable and detachable gooseneck - 1 × 2 hydraulic cylinders, 220 bar operating pressure - Kingpin: 2 inch, bolted - Kingpin position: single Godpfx Amsynprwj Houh ---Platform & Superstructure - 3 removable platforms with hardwood flooring - Each platform: 100 × 1,300 × 2,115 mm - Weight per platform: 225 kg - 2 × lashing rings per platform, each with 8,000 kg lashing capacity - Platform widening: 225 mm, galvanized - Extension clamps: 12 × 2 pieces, galvanized ---Load Securing Lashing rings: - 1 × 2 pieces 13.4 t on gooseneck - 7 × 2 pieces 13.4 t - 4 × 2 pieces 8 t in lowbed - 2 × 2 pieces 13.4 t - 3 × 2 pieces 8 t on rear platform Stake pockets: - 6 × 2 pieces in pool (50 × 100 mm) - 3 × 2 pieces at rear (50 × 100 mm) ---Accessories & Equipment - Aluminium front panel gooseneck: 360 × 1,550 mm - Aluminium side panels: 360 × 1,900 mm - Aluminium rear panel: 360 × 2,480 mm - Toolboxes right & left (500 × 350 × 400 mm) - Central lubrication system - Side underrun protection as per ECE R73 - Warning...

Stanje: novo, največja dovoljena obremenitev: 35.450 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.740 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 3.500 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer K.SLA_RJ 3 / 1N ? 18/24 | Low Loader | Extendable | Wheel Wells | Ramps | 3 Axles Low gooseneck height, small tires! 770 mm loading height Manufacturer: Kässbohrer Model: K.SLA_RJ 3 / 1N ? 18 / 24 Vehicle type: Extendable jumbo low loader with wheel wells Registration country: Germany Year of manufacture: 2026 Color: RAL 3020 Traffic Red ----Technical Data Dimensions * External length: 13,190 mm * Platform length: 9,240 mm * Extension: 3,500 mm * Gooseneck length: 3,950 mm * Platform height: 770 mm * Fifth wheel height: 1,150 mm * Total width: 2,550 mm + 600 mm side extension * Wheelbase: 7,800 mm * Axle spacing: 2,260 mm * Locking position: 500 mm * Rear swing door: 2,300 mm ----Weights * Tare weight: approx. 12,556 kg * Permissible total weight (80 km/h): 48,000 kg * Permissible total weight (60 km/h): 52,800 kg * Axle load: 24,000 kg * Axle capacity: 8,000 kg per axle * King pin load capacity: 15,000 kg ----Chassis / Axles * 3 BPW axles * Air suspension * 2 rigid front axles * 1 trailing rear axle * Lifting axle on 1st axle (load-dependent) * Automatic axle lifting control from tractor unit * Air suspension with load gauge * ECAS electronic air suspension system ----Braking System / Electrics * WABCO EBS 4S/3M * ABS * RSS roll stability support * Electro-pneumatic dual-circuit braking system * Lighting as per ECE R48 * Aspöck lighting system * Sockets: * 24N (ISO 1185) * 24S (ISO 3731) * 15-pin ADR (ISO 12098) ----Wheels / Tires * Tire size: 205/65 R17.5 * 12 wheels * Steel rims * M+S tires * 3PMSF winter tires * Tire pressure monitoring system * Spare wheel holder on front wall ----Chassis / Superstructure * High strength S700 MC steel chassis * 2" king pin (bolted) * Gooseneck with 90° vertical corners * Partial metallization Zn/Al corrosion protection * 45 mm hardwood floor * Tread plate over wheels ----Loading Platform / Extensions * Side extension up to 300 mm * 100x100 box profile pockets * Galvanized steel extensions * Hardwood extension boards (3 × 100 mm) * Storage box for extension boards ----Wheel Wells / Excavator Trough Guedpfx Asyrkpxom Heh * Wheel wells for vehicle transport * Excavator trough at rear * Width: 750 mm * Depth: 310 mm * Length: 3,000 mm * Wheel well bridges made of hardwood ----Ramps * Foldable drive-on ramps * Ramp capacity: 40 t * Ramp length: 2,750 mm * Ramp width: 850 mm * Hydraulic sliding system * Ramp floor made of hardwood * Ramp securing with tension chain ----Load Securing Lashing points: * Gooseneck: 2 × 2 pcs 5 t, 1 × 2 pcs 10 t * Outer platform: 3 × 2 pcs 5 t, 4 × 2 pcs 10 t * Below outer frame: 2 × 2 pcs 8 t * Platform: 4 × 2 pcs 6 t * Further securing: * 5 × 2 stake pockets * 3 × 2 stake row pockets * 8 × 2 plug-in stakes * Container locks for 20 ft / 30 ft containers ----Equipment / Accessories * Toolbox (700 × 400 × 360 mm) * Rotating beacon * Rear work light * Extendable warning panels with LED * Side marking tape * Rear marking tape * Wheel chocks * WABCO Smartboard * Power cable (NATO socket) For further information, please feel free to contact us.

Stanje: rabljeno, največja dovoljena obremenitev: 21.130 kg, skupna masa: 34.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2024, naslednji pregled (TÜV): 11/2026, skupna širina: 2.540 mm, skupna višina: 1.980 mm, Oprema: ABS, Kässbohrer SLL 2-axle lowbed with hydraulic steering Manufacturer: Kässbohrer Model / Vehicle code: K.SLL 2 / 2H ? 18 / 20 Vehicle type: Lowbed semi-trailer Country of registration: Germany Brand: Kässbohrer Chassis color: RAL 3020 Traffic Red Dimensions & Weights * Overall length: 13,210 mm * Overall width: 2,540 mm * Fifth wheel height (H5): 1,250 mm * Platform height (unladen): 910 mm * Platform height (laden): 300 mm * Platform length: 6,810 mm * Extension: 5,550 mm * Gooseneck length: 3,600 mm * Rear swing door: 2,100 mm * Platform thickness: 200 mm * Wheelbase: 10,530 mm * Axle spacing: 1,360 mm * Unladen weight: approx. 12,873 kg (±3%) * Gross weight (40 / 60 / 80 km/h): 42,000 kg * Total axle load: 24,000 kg * Permissible king pin load: 18,000 kg (40/60/80 km/h) Chassis & Axles * 2 axles * 2 hydraulically steered axles * Axles: BPW * Suspension: Air suspension * Suspension stroke: 260 mm (190 mm / -70 mm) * Additional ride height increase of 40 mm possible * Load gauge for axle load display * Semi-automatic axle alignment with warning light sensor Brake System * WABCO EBS 2S/2M * ABS (Anti-lock Braking System) * RSS (Roll Stability Support) * Braking system in accordance with UN ECE R13 Electrics & Lighting * 24 V LED lighting system Gjdpfxoycnbaj Am Heuh * 2 × 7-pin + 1 × 15-pin socket * LED brake lights * LED rear and fog lights * Electrical system according to UN ECE R48 & ADR * LED work lights at rear (2 units, reverse-controlled) * LED rotating beacon (1 unit) Tyres & Wheels * Tyre size: 245/70 R17.5 * Tyres: M+S * 3PMSF (winter suitable) * Tyre pressure monitoring system as per R141 * Number of wheels: 9 complete wheels * Rims: Steel rims (Kässbohrer selection) * Spare wheel holder: 1 unit on gooseneck Steering & Controls * Hydraulic steering on both axles * Control panel in vehicle * Radio remote control for external steering control * Multifunctional WABCO Smartboard * Axle load display * Suspension control * Tyre & brake wear monitoring * Breakdown & system monitoring Chassis & Frame * High-strength steel S700 MC (ISO 1726) * Welded bogie-bed connection * Partial metallisation (85% zinc / 15% aluminium) on outer frame & gooseneck * Adjustable and detachable gooseneck * 1 × 2 hydraulic cylinders, 220 bar operating pressure * King pin: 2 inch, bolted * King pin position: single Platform & Body * 3 removable platforms with hardwood flooring * Each platform: 100 × 1,300 × 2,115 mm * Weight per platform: 225 kg * Each platform with 2 × lashing rings (8,000 kg pull force) * Platform widening: 225 mm, galvanized * Extension clamps: 12 × 2 units, galvanized Load Securing * Lashing rings: * 1 × 2 units 13.4 t at gooseneck * 7 × 2 units 13.4 t * 4 × 2 units 8 t in lowbed * 2 × 2 units 13.4 t * 3 × 2 units 8 t on rear platform * Stake pockets: * 6 × 2 units in pool (50 × 100 mm) * 3 × 2 units at rear (50 × 100 mm) Body Components & Accessories * Aluminium front panel on gooseneck: 360 × 1,550 mm * Aluminium side panels: 360 × 1,900 mm * Aluminium rear panel: 360 × 2,480 mm * Toolboxes right & left (500 × 350 × 400 mm) * Central lubrication system * Side underrun protection according to ECE R73 * Extendable warning signs (423 × 423 mm, up to 1,000 mm) * Yellow side reflector band * Red rear reflector band For further information, please contact us.

Stanje: novo, največja dovoljena obremenitev: 40.320 kg, skupna masa: 50.960 kg, konfiguracija osi: > 3 osi, Oprema: ABS, Celoten seznam naših vozil, ki so na voljo takoj ali v kratkem času, najdete na naši spletni strani. Izvleček iz opreme. Popolna oprema na zahtevo. GOOSENECK (Vratna prikolica) Gooseneck z zadnjim naklonom približno 750 mm x 10°. 3 pari pritrdilnih obročev (nosilnost 5.000 daN). Tla iz trdega lesa, debeline približno 30 mm. - 2-palčni kraljevski zatič - Na pocinkanem priključnem profilu spredaj rumeno-rdeče zračne spojke. - 4 klini za zavoro z nosilcem na čelni steni (± 5 kg). TOVORNA POVRŠINA 5 parov pritrdilnih obročev, ki se odpirajo navzven (nosilnost 5.000 daN). 3 pari pritrdilnih obročev, ki se odpirajo navzven (nosilnost 10.000 daN). 1 par pritrdilnih obročev, nameščen vodoravno spredaj na tovorni površini (nosilnost 10.000 daN). Tla iz trdega lesa, debeline približno 48 mm, nad osmijo rebrasta kovinska pločevina. - Na goosenecku in na zadnji strani, levo in desno, po en nosilec za opozorilne table, vključno z vtičnico. - Pocinkana jeklena čelna stena. - 3 višinske lesene plošče - Pocinkani zložljivi nosilci pod naklonom tovorne površine. - Nosilec za rotacijsko luč na zadnji strani prikolice. - Višinsko nastavljiva ponjava, približno 3.960 mm - Pocinkana čelna stena z mehanizmom napenjanja za drsne zavese. Višinsko nastavljivo za približno 400 mm. - Streha blagovne znamke EDSCHA, ki se lahko premika naprej na aluminijastih tirnicah. - Na tovorni površini 3 pari drsnih nosilcev. - Nadgradnja je lahko na zadnji strani, levo in desno, hidravlično razširjena za približno 750 mm (za nakladanje/razkladanje). - Drsna ponjava z visokim portalnim nosilcem. - Drsna ponjava z rezervo dolžine približno 700 mm, z zateznimi trakovi v razmaku približno 600 mm. Višina zgornjega roba nadgradnje približno 3.960 mm (obremenjeno). - Vožnja z odprto drsno ponjavo ni dovoljena in povzroči poškodbe ponjave. - Pritrdilna letev za aluminijaste rampe na zadnji strani vozila. - Upravljalni ventili za hidravlično razširitev nadgradnje, nameščeni na desni strani prikolice. (± 4 kg) - Bela odsevna trak, v skladu z direktivami EU, na strani in zadnji strani rdeče barve. - Elektro-hidravlična enota na zadnji strani pod tovorno površino. (± 45 kg) - Nosilec za par opozorilnih tabel na čelni steni. - Štiri opozorilne table, ki se iztegujejo za približno 400 mm, približno 423 x 423 mm, z LED pozicijsko lučjo (± 25 kg). - Na opozorilnih tablah nosilec za rotacijsko luč. - 7 parov žepov za nosilce na zunanjem okvirju tovorne površine, za nosilce približno 100 x 50 mm (± 21 kg). - Dvigalna os na prednji osi z nadzorom preko sistema TEBS-E, odvisno od trenutne obremenitve osi in trenutnega stanja obremenjenosti (± 69 kg). Gedpfx Aez N Nx Rom Heuh - 6 parov potopljenih pritrdilnih obročev vzdolž centralnega nosilca (nosilnost 5.000 daN). - 1 par potopljenih pritrdilnih obročev vzdolž centralnega nosilca na zadnji strani (nosilnost 10.000 daN). (± 27 kg) - Na rebrastih pločevinah na goosenecku in na tovorni površini, nanos plasti peska kot protidrsna zaščita. - 1 LED vzvratna luč, levo in desno pred prvo osjo. - 2 LED delovne luči, nameščeni na zadnji plošči. - Akustični opozorilni signal pri vzvratni vožnji. DODATNA OPREMA - Kabel za napajanje elektro-hidravlične enote in/ali električnega vijačnega vleka (približno 35 mm², približno 3,5 m dolg, maks. 250 A) med prikolico in SZM s priključkom (NATO-NATO). PODPORA SEDLA JOST podpora sedla, mehanska, z 2-stopenjskim menjalnikom za približno 24 t nosilnosti (približno 50 t testna nosilnost). PNEVMATIKE Pnevmatike 205/65 R17,5 - proizvajale

Stanje: novo, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 12.300 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Wiese 2-Axle Step Frame Platform Semi-Trailer with Fassi F545 Crane Mega Lowliner Chassis Welded construction with cross members, manufactured entirely from high-grade steel Neck height: approx. 220 mm including coupling plate Equipped with all necessary chassis reinforcements and cross connections Axles 2 BPW axles, each with 10,000 kg load capacity, fitted with 17.5" drum brakes ABS: 1 axle monitored Axle spacing: 1,810 mm Tyres 8 units, type 235/75 R17.5 Rims Aluminium rims, 10-hole, hub-centric, offset = 122 mm Lighting System 24V lighting system in accordance with EU Directive 76/756/EEC and subsequent amendments, featuring: 2x2 three-chamber LED tail lights 1x LED reversing light 1x LED fog light LED side marker lights Lane departure lights Number plate illumination 2x 7-pin sockets + 1x 15-pin socket wired as per EU standard Floor Galvanised grating floor in the low-bed area Steel chequer plate in axle area Load Securing Outer frame with D030 mm lashing hole profile on the bevel 2x12 lashing points, 8,000 daN in the outer frame 3 rows of combo stake pockets for 80x80 mm insert stakes in the low-bed area Accessories 2x wheel chocks with holder Spare wheel carrier winch 2x toolboxes with slide-out drawer (for chain storage) Surface Protection Steel structure: blasted and primed Paint Finish Chassis/frame/floor frame: single colour in RAL 3020 (traffic red) Axle hubs: single colour in RAL 3020 (traffic red) Axles: KTL-coated black Rims: Aluminium Durabright With Fassi F 545 RA.2.28 XE-Dynamic Hydraulic outriggers Additional stabiliser beams Godpfx Ast Izpyem Houh 360° working range Approx. 90% lifting capacity towards the front For further information please do not hesitate to contact us.

Stanje: rabljeno, skupna masa: 47.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2004, naslednji pregled (TÜV): 08/2026, * Müller Mitteltal TS3 nizkopodni polpriklopnik * Prva registracija: 11/2004 * 3 osi * Zračno vzmetenje * Gigant osi * Hidravlične dolge rampe, pomične in zložljive * Razširitve iz 2,50 m na 3,0 m širina nakladalnega prostora * Nakladalna dolžina: 8,50 m pri nakladalni višini 0,85 m * Nakladalna dolžina na vratu: 3,40 m pri nakladalni višini 1,50 m * Podpore * Neto teža: 10.260 kg * Tehnično dovoljena skupna masa: 47.000 kg * TÜV veljaven do: 08/2026 Guodpfxjw Tgkbs Am Heh * Tehnični pregled do: 02/2026

Stanje: novo, največja dovoljena obremenitev: 39.280 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profil 30,0: ----Zavora: * Wabco EBS-E (električni zavorni sistem) * Naprava za sprostitev v primeru zasilnega stanja za cilindri z zračnim pomnilom * Bobnaste zavore ----Osi: * 3 x 11 ton BPW Eco Plus osi * zadnja os s prilagodljivim nagibom in elektropnevmatskim sistemom za zaklepanje krmiljenja ----Vzmetenje: * Zračno vzmetenje z dvigalom in spuščanjem ter ventilom za vzdrževanje višine ----Elektrika / Osvetlitev: * Sistem za nadzor tlaka v pnevmatikah (TPMS) * Nadzorna plošča Smartboard, nameščena na prikolici, služi kot informacijsko orodje in vsebuje tipalnike za prikaz skupne obremenitve osi * 15-polni vtič za elektriko * LED-osvetlitvena oprema 12 / 24V * LED-okrogla luč (odstranljiva) zadaj levo ----Splošni dodatki: * stranski zaščitni sistem * dvižna oprema spredaj in mehanske podpiralne noge zadaj na šasiji * ravne jeklene blatnike * nosilec za rezervno kolo pod šasijo, na desni strani ----Površina za nizko nosljivost: * Patforma za sedelno prikolico s 45-stopinjsko nagnjenimi sprednjimi robovi in predalom za orodje na sprednji strani, izdelan iz pocinkane jeklene pločevine, B = 2.480 x V = 500 x D = 665 mm z pokrovom * stranske aluminijaste strani na platformi za sedelno prikolico, 400 mm (RAL 9010, čista bela), z možnostjo odpiranja in odstranjevanja * zadnja stena, višina 150 mm * zadnji naklon na platformi za sedelno prikolico za nizko nosljivost, dolžina približno 700 mm * platforma za sedelno prikolico z 50 mm debelimi lesenimi deskami ter platforma za nizko nosljivost z 60 mm debelimi lesenimi deskami * diamantna pločevina nad osmi ----Razširitve: * 8 x mehanske razširitve, ki se odpirajo, na skupno širino 3 m, vendar ne na zadnjem naklonu (razširitvene deske so na voljo in jih je mogoče shraniti na platformi za sedelno prikolico) * mehanski sistem za nastavitev opozorilnih tabel spredaj in zadaj ----Komplet za pritrditev tovorja (Las-paket): * na platformi za sedelno prikolico 2 x 6,3 t pritrdišča za pritrditev tovora, stransko 3 x 5 t pritrdišča za pritrditev tovora v zunanjem okvirju * v platformi za nizko nosljivost stransko 2 x 13,4 t pritrdišča za pritrditev tovora ter 4 x 10 t pritrdišča za pritrditev tovora, ki se lahko zasukajo in spuščajo, vstavljena v zunanjem okvirju * stransko 2 x 6,4 t pritrdišča za pritrditev tovora ter zadaj 1 pritrdišče za pritrditev tovora v nosilcu za roko bagra * 2 x zaklepna naprava za kontejnerje neposredno za upognjenim delom v platformi za nizko nosljivost ----Nosilec za roko bagra: * Nosilec za roko bagra od konca zadnje fiksne osi do krmilne osi do končnega nosilca, celoten z notranjimi ojačitvenimi profili, dolžina približno L = 2.450 x Š = 770 mm x G = 270 mm ----Rampe: * mehanske, enodelne, vroče pocinkane hidravlične rampe, približno 3.000 x 720 mm (mehansko nastavljive v stranski smeri) * nadzorna enota, 4-kanalna, za poznejšo nadgradnjo stranke z hidravličnim sistemom za premik ramp * zunanja deska na rampi je iz 50 mm trdega lesa * protizdrsne letve na zunanjem okvirju rampe in na naklonu ----Hidravlika: * Hidravlični razdelilnik na prikolici (pri hidravlični moči črpalke na tovornjaku nad 40 l do 120 l/min) ----Dimenzije tovornega prostora: * Površina platforme za sedelno prikolico: približno 3.935 x 2.480 mm * Površina za nizko nosljivost: približno 8.500 x 2.520 mm * Višina tovornega prostora brez obremenitve: približno 910 mm (vključno z 860 mm naklonom) ----Višina sedla: * približno 1.220 mm (primeren za 2-osne in 3-osne SZM) Guedpsl Tnvgefx Am Hsh ----B

Stanje: novo, največja dovoljena obremenitev: 29.260 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.200 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, skupna višina: 3.570 mm, Leto izdelave: 2026, Oprema: ABS, Technical Data: Model and Manufacturer - Model: Kässbohrer K.SLA R 3 / 1N - 18 / 30 - Manufacturer: Kässbohrer - Type: Extendable low-bed semi-trailer with excavator recesses, suitable for transporting vehicles and heavy machinery. Dimensions - Overall length: 13,190 mm - Gooseneck length: 3,950 mm - Platform length: 9,240 mm - Extension: 3,500 mm (pe) - Total width: 2,550 mm (expandable by 600 mm with side extensions) - Fifth wheel height: 1,250 mm - Platform height: 875 mm - Ramp length: 2,750 mm - Ramp width: 850 mm - Wheelbase: 7,800 mm - Axle distance: 2,260 mm Weights and Load Capacities - Permissible gross weight: - 52,800 kg at 60 km/h - 48,000 kg at 80 km/h - Tare weight: 12,744 kg ±3% - Axle load capacity: 30,000 kg (10 tonnes per axle) - King pin load capacity: 18,000 kg Axle Equipment - Number of axles: 3 (2 rigid at front, 1 trailing axle at the rear) - Lift axle: Manually raiseable depending on load (1st axle) - Axle material: BPW axles with drum brakes Tyres and Rims - Tyre size: 245/70 R17.5 - Tyre brand: GOODYEAR - Tyre markings: M+S label and 3PMSF marking - Tyre pressure monitoring system: Increases fuel efficiency and tyre life - Number of rims: 12 units (steel rims with offset ET120) Chassis and Suspension - Suspension: Air suspension with load gauge - Braking system: Dual-circuit air brake by WABCO, EBS 4S/3M with ABS and RSS (roll stability support) Lighting and Electrics - Lighting system: 24V, multi-chamber lights from ASPÖCK, LED side marker and rear lights - Coupling type: Standard yellow/red for air supply connection - Electrical connectors: NATO socket with 2 x 50mm² interconnection cables (3 m long) Ramps - Type: Foldable hydraulic loading ramps with sliding mechanism - Capacity: 40 tonnes - Ramp surface: Hardwood - Safety: Ramp protection tension chain included Load Securing - Lashing rings: - 2 x 2 lashing rings, each 5,000 daN capacity - 1 x 2 lashing rings, 10,000 daN capacity on gooseneck - 4 x 2 lashing rings, 6,000 daN capacity in the low bed area - Container lock housing: Suitable for transportation of 1 x 20 FT or 1 x 30 FT containers - Stake pockets: 5 x 2 stakes (50 mm x 100 mm) Special Features - Gooseneck: With 90° vertical corners, stable and durable - Floor: 45 mm thick hardwood floor and steel floor with chequer plate structure - Excavator recess bridge: Bridge consists of hardwood planks with steel supports to cover wheel recesses - Toolbox: PVC-coated steel, dimensions 750 x 400 x 360 mm Paintwork - Chassis: Traffic red (RAL 3020) - Partial metallization of the loading areas Guodpfxou Tarpo Am Heh Condition: New and ready for immediate use. - Perfectly suited for heavy hauling and use in construction or machinery relocation.

Stanje: rabljeno, največja dovoljena obremenitev: 7.040 kg, skupna masa: 9.900 kg, konfiguracija osi: 2 osi, prva registracija: 02/2016, dolžina tovornega prostora: 9.600 mm, širina tovornega prostora: 2.000 mm, skupna širina: 2.070 mm, skupna višina: 1.800 mm, * Druga roka iz komunalne lastnine * Višina zadnje nakladalne površine 90 cm, spredaj 140 cm * Skupna dolžina nakladanja 9600 cm * Mere sedla cca 1,20 m Guedpov T E Syofx Am Hsh * Škatle za orodje * Nakladalne rampe * Priložena ustrezna sedlasta sklopka Pridržujemo si pravico do napak, tipkarskih napak in vmesne prodaje. Ogled po dogovoru.

Stanje: rabljeno, največja dovoljena obremenitev: 85.000 kg, skupna masa: 105.000 kg, konfiguracija osi: > 3 osi, prva registracija: 06/1999, dolžina tovornega prostora: 18.000 mm, širina tovornega prostora: 3.500 mm, skupna širina: 3.500 mm, Cargo Master CM 90, namenjen za notranjo uporabo, primer: industrija, pristanišča, strme ladijske rampe, neodvisno vzmetenje koles, hidravlično dvigovanje, izjemen kot krmiljenja, velika okretnost, znižana nakladalna višina približno 670 mm, dvignjena nakladalna višina približno 1150 mm, nosilnost: približno 85.000 kg, vozilo je lahko polepljeno z oglaševanjem in/ali označeno. Guodpfx Asxvwb Uom Hjh SI86388 Naša ponudba je praviloma brez novega tehničnega pregleda (TÜV). Če želite nov tehnični pregled, vam z veseljem pripravimo ponudbo naših partnerskih delavnic! Vozilo je lahko polepljeno z oglaševanjem in/ali označeno. Veljajo naši splošni pogoji dobave in plačila. Za ta objekt vam z veseljem pripravimo ponudbo financiranja ali leasinga. Prosimo, kontaktirajte nas!

Stanje: rabljeno, največja dovoljena obremenitev: 16.300 kg, skupna masa: 22.000 kg, konfiguracija osi: 1 os, prva registracija: 08/2022, naslednji pregled (TÜV): 09/2026, BPW 10t axles, frame construction made of high-strength Domex 700, total loading area 11,800 mm, loading platform length 8,350 mm, Knorr brake EBS 4s/2k (ASR), rear support legs foldable 25,000 kg, pneumatic valve for adjustment of 4 wheel blockers, electric winch with remote control, 3x2 lashing rings in the outer platform frame (8t), aluminium frame L: 2,300 mm - W: 500 mm, hot-dip galvanized, toolbox, rollers on the loading platform, extendable bumper, ramp holder. Godpfx Ajih E Hyom Heuh

Stanje: rabljeno, največja dovoljena obremenitev: 175.620 kg, skupna masa: 219.000 kg, konfiguracija osi: > 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendle axle units with remote control. Technical gross weight: 219,000 kg possible Technical payload: 175,620 kg possible Hydraulically suspended and 8-axle steered Goldhofer low-bed semi-trailer, type STHP 8 (3+5), consisting of 4 heavy-duty modules with detachable gooseneck and up to 5-meter extendable excavator deck including 4 wheel recesses with ABS, up to 175,620 kg technical payload possible. Guodpfxez N Nrke Am Heh Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck, type STH / ST Year of construction: 2002 Compatible with heavy-duty module undercarriages, with drive-over loading decks. Unladen weight approx. 5,900 kg Permissible fifth wheel load front: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" bolt Removable aluminium sideboards Fully hydraulically movable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty bogie module First registration: 14.11.2001 As a single module, technical gross weight: 108,000 kg, technical axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendle axles 8-fold, 24 wheels with tyres: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ± 60° Hydro-mechanical 2-circuit all-wheel forced steering integrated in the chassis, with maximum steering angle of axle units of 60°, integrated hydraulic oil tank Front and rear optimized pin-lug couplings for longitudinal combinations Single-tired pendle axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brake and ABS, technical axle load of 34 t at 5 km/h 3rd module: Extendable heavy-duty low-bed module – excavator bridge Year of construction: 2002 Internal dimensions approx. 7.50 meters length, 3.00 meters width, 0.40 meters loading height Build height 350 mm Extendable by approx. 5.00 meters – telescopic 4 wheel recesses with loading ramp module at the front Build height in wheel recess area approx. 150 mm Load capacity up to 80 t in the well and 175.6 t in the complete STHP8 (3+5) module possible Unladen weight: 11,900 kg Front and rear hydraulic pin lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty bogie module First registration: 04.01.2002 Technical gross weight: 115,000 kg possible, technical axle loads: 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible Single-tired hydraulic pendle axle units with 4 wheels per axle line, 20 wheels total, tyres: 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the tractor combination. A current manufacturer's certificate from Goldhofer for the special low-bed combination is available. The low-bed can be tested on our premises. Price NET plus 19% VAT. All details without guarantee. Errors and prior sale reserved. Internal stock no.: 2285 Listing also available in English.

Stanje: rabljeno, največja dovoljena obremenitev: 175.620 kg, skupna masa: 219.000 kg, konfiguracija osi: > 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3+5) 8-axle hydraulic swing BPW axle assembly with remote control. Technically permissible total weight: 219,000 kg Payload: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed trailer, Type STHP (3+5), consisting of 4 heavy-duty modules with removable gooseneck, extendable up to 5 m telescopic excavator low-bed with 4 wheel recesses, ABS, payload up to 175,620 kg (technically possible). Comprising the following 4 individual heavy-duty module components: 1st Module: Hydraulic universal gooseneck, Type STH - Can be combined with heavy-duty platform modules and drive-over loading decks - Unladen weight: 5,900 kg - Permissible front fifth wheel load: 35,000 kg - Length: approx. 4.10 m - Saddle height: approx. 1.30 m - 3.5" king pin - Detachable aluminium side walls - Fully hydraulically manoeuvrable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty module - As single module: technically permissible total weight: 108,000 kg (axle loads up to 36,000 kg at 5 km/h) - Unladen weight: 10,350 kg - Technical payload as single module: 97,650 kg at 5 km/h - 8-fold hydraulic pendulum axles, 215/75/R17.5 tyres - Axle load: up to 25 t at 20 km/h - Vehicle width: 3 m - Axle spacing: 1.5 m - Max. steering angle: ±60° - Dual-circuit hydromechanical all-wheel forced steering (max. axle steering angle 60°) with integrated hydraulic tank - Optimised front/rear pin-plate coupling for longitudinal combination - Single-tyre pendulum axles, 8 wheels per axle line - Hydraulic axle compensation: ±300 mm, hydropneumatic suspension with gas pressure accumulator - Hydraulic steering of all axles - BPW axles with drum brakes and ABS, nominal axle load: 34 t at 5 km/h 3rd Module: Extendable heavy-duty low-bed/excavator deck - Year of manufacture: 2002 - Internal dimensions: approx. 7.50 m (length) x 3.00 m (width), loading height 0.40 m - Construction height: 350 mm - Extendable by approx. 5.00 m Gsdsz N Nq Hepfx Am Hjuh - Unladen weight: 11,900 kg - 4 wheel recesses, extendable module at the front section - Total height in wheel recess area: approx. 150 mm - Load capacity: up to 80 t on the low-bed, up to 175.6 t in full STHP 8 (3+5) configuration - Front and rear hydraulic bolt-plate couplings with claw adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty module - First registration: 04.01.2002 - Technically permissible total weight: 115,000 kg; axle loads: 23,000 kg at 5 km/h - Unladen weight: approx. 14,200 kg - Technical payload: up to 100,800 kg - Single-tyre hydraulic pendulum axles, 4 wheels per axle line, tyres: 20 x 285/70 R 19.5 - Hydraulic axle compensation: ±300 mm, hydropneumatic gas pressure accumulator suspension - Hydraulic steering on all axles - Radio remote control for steering axles Notes: - Up to 3 different train combinations possible with the 4 heavy-duty modules; payloads vary according to configuration - The low-bed can be viewed and tested at our premises - Current Goldhofer manufacturer’s certificate for special low-bed combination available Price: NET, plus 19% VAT. All information provided without guarantee. Subject to errors and prior sale. Internal reference number: 2285 Advert also available in complete German / Inserat auch komplett in Deutsch verfügbar

Stanje: rabljeno, največja dovoljena obremenitev: 175.620 kg, skupna masa: 219.000 kg, konfiguracija osi: > 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendle axle units with remote control. Gjdpfx Asz N Nqaom Hsuh Technical gross weight: 219,000 kg possible Technical payload: 175,620 kg possible Hydraulically suspended and 8-axle steered Goldhofer low-bed semi-trailer, type STHP 8 (3+5), consisting of 4 heavy-duty modules with detachable gooseneck and up to 5-meter extendable excavator deck including 4 wheel recesses with ABS, up to 175,620 kg technical payload possible. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck, type STH / ST Year of construction: 2002 Compatible with heavy-duty module undercarriages, with drive-over loading decks. Unladen weight approx. 5,900 kg Permissible fifth wheel load front: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" bolt Removable aluminium sideboards Fully hydraulically movable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty bogie module First registration: 14.11.2001 As a single module, technical gross weight: 108,000 kg, technical axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendle axles 8-fold, 24 wheels with tyres: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ± 60° Hydro-mechanical 2-circuit all-wheel forced steering integrated in the chassis, with maximum steering angle of axle units of 60°, integrated hydraulic oil tank Front and rear optimized pin-lug couplings for longitudinal combinations Single-tired pendle axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brake and ABS, technical axle load of 34 t at 5 km/h 3rd module: Extendable heavy-duty low-bed module – excavator bridge Year of construction: 2002 Internal dimensions approx. 7.50 meters length, 3.00 meters width, 0.40 meters loading height Build height 350 mm Extendable by approx. 5.00 meters – telescopic 4 wheel recesses with loading ramp module at the front Build height in wheel recess area approx. 150 mm Load capacity up to 80 t in the well and 175.6 t in the complete STHP8 (3+5) module possible Unladen weight: 11,900 kg Front and rear hydraulic pin lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty bogie module First registration: 04.01.2002 Technical gross weight: 115,000 kg possible, technical axle loads: 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible Single-tired hydraulic pendle axle units with 4 wheels per axle line, 20 wheels total, tyres: 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the tractor combination. A current manufacturer's certificate from Goldhofer for the special low-bed combination is available. The low-bed can be tested on our premises. Price NET plus 19% VAT. All details without guarantee. Errors and prior sale reserved. Internal stock no.: 2285 Listing also available in English.

Stanje: rabljeno, lastna masa: 6.560 kg, največja dovoljena obremenitev: 18.440 kg, skupna masa: 25.000 kg, konfiguracija osi: 2 osi, prva registracija: 09/2017, dolžina tovornega prostora: 13.700 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 850 mm, medosna razdalja: 7.500 mm, barva: modra, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, dodatne luči, zavorni sistem na stisnjen zrak, * German semi-trailer * Very good visual condition, see photos * 2-axle low loader, Jumbo TO 152 DE * Loading platform: length 13,700 mm x width 2,540 mm * Loading height approx. 850 mm * Stake pockets * Multilock system * Wooden loading floor * Winch with cable remote control 15,000 lbs * Long aluminium loading ramps 3,000 x 400 mm, laterally adjustable * ROR axles * Air suspension * Haacon spindle supports * ABS + EBS * Work lights * Spare wheel Gujdpoxu Nnwjfx Am Hoh * Toolbox * Brake drums * Wheelbase: 7,500 mm + 1,250 mm * Permissible gross weight up to 27,200 kg * Unladen weight 6,560 kg * Payload up to 20,640 kg If a new TÜV inspection is required, we are happy to provide an offer through our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV, without new SP, without new UVV. Further trucks can be found on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods to ensure there are no misunderstandings regarding condition and suitability. Inspection and viewing are possible at any time by prior appointment and are expressly desired. All information is provided without guarantee. We accept no liability for errors or inaccuracies in the offer. The buyer is obliged to independently inspect the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.

Stanje: rabljeno, lastna masa: 16.400 kg, največja dovoljena obremenitev: 28.600 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2016, dolžina tovornega prostora: 12.400 mm, širina tovornega prostora: 2.450 mm, barva: zelen, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, hidravlika, * Nemški prikolica za težke tovore iz prve roke * Doll prikolica za težke tovore z odstranljivim podaljškom + elektronske rampe * Prikolica za težke tovore vrhunskega proizvajalca DOLL, tip Panther T3E-0S3L * odstranljiv podaljšek * nosilnost 35.570 kg * tehnologija podvozja Panther * 3 BPW osi, krmiljene * vse osi z hidravlično izravnavo osi * stransko nameščene voziščne površine * skupna dolžina 16,61 metra * dolžina nizkega prikolice 8,4 metra + 4 metre dviga na zadnji strani * širina 2,55 metra * DOLL tronic® – inteligenten sistem upravljanja in nadzora na osnovi CAN-Bus. S svojo dovršeno senzoriko omogoča enostavno in varno upravljanje vseh osrednjih funkcij prikolice. Barvne LED diode vam jasno prikazujejo, v katerem položaju je vaše vozilo. - Kakovostne tipkovnice na zadnji strani in podaljšku - Upravljanje vseh funkcij: podaljšek, krmiljenje, višina vožnje - Neprekinjeno spremljanje položajev - Integrirano v sistem: upravljanje ramp in nadzor centralnega sistema za mazanje * Udobno upravljanje krmiljenja in višine vožnje preko tipkovnic in brezžičnega daljinskega upravljalnika DOLL connect® * dostopne rampe, dolžina 2,5 metra - hidravlične in pomične z daljinskim upravljanjem * Izjemna terenska zmogljivost z maksimalnim kotom krmiljenja 55° * neodvisno vzmetenje, hidravlično prisilno krmiljenje in elektrohidravlično dodatno krmiljenje * vseskozi vodoravna platforma zahvaljujoč hidravlični izravnavi osi * Enostavno manevriranje na ozkih prostorih in zahtevnem terenu * Odlična stabilnost na cesti tudi pri nizki višini vožnje in visokem težišču tovora * pritrdilne točke * obremenitev osi 3 x 12.000 kg * razdalja med osmi 1/2/3 os 1,36 metra * rotacijska luč * bobnaste zavore * osi BPW Eco * orodjarna omara * obremenitev sedelne prikolice 21.000 kg * skupna masa 45.000 kg - tehnično možno 57.000 kg * prazna teža 16.400 kg * nosilnost 28.600 kg - tehnično možno 40.600 kg Če želite novo tehnično pregled, vam z veseljem pripravimo ponudbo naših partnerskih servisov. Naša ponudba je na splošno brez novega tehničnega pregleda, brez novega certifikata DGUV, brez novega certifikata SP, brez novega certifikata UVV. Dodatne tovornjake najdete na naši spletni strani pod: Gjdpfx Aszk Rb Rom Heuh Govorimo naslednje jezike: nemščina, angleščina, poljščina, turščina Opomba: Priporočamo in nujno predlagamo ogled in pregled blaga, da se pri kupcu ne bi ustvarile napačne predstave o stanju in primernosti. Oglede in preglede lahko izvedemo kadar koli po dogovoru, kar je tudi izrecno zaželeno. Vse informacije so podane brez jamstva. Ne odgovarjamo za napake in netočne informacije v ponudbi. Kupec je dolžan sam preveriti stanje in opremo blaga/vozila. Pridržujemo si pravico do sprememb, medprodaje in napak.

Stanje: novo, vzmetenje: drugo, barva: drugo, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, Equalizer block for low-bed semi-trailers incl. container locks. Price per equalizer block. -- Subject to typographical errors, mistakes, and changes. Sample images --. More data at: !, More Details: ! Gedpfx Aoz R Tdzjm Houh

Stanje: rabljeno, največja dovoljena obremenitev: 85.100 kg, skupna masa: 106.000 kg, konfiguracija osi: > 3 osi, prva registracija: 11/2009, dolžina tovornega prostora: 19.390 mm, širina tovornega prostora: 2.470 mm, skupna širina: 2.550 mm, skupna višina: 1.950 mm, Oprema: ABS, techn. možno: 8 x 14 t. osi, ABS, EBS, BPW osovina(e), podizne osovine, hidraulično vešanje, 6 osovina hid. prinudno upravljanih, 1. + 2. osovina - podizna osovina, bubanj kočni sistem, 13 prstenova za vezivanje tereta sa svake strane, 8 x džepova za stube sa svake strane, 2 x šine za džepove za stubove po sredini teretne površine, rotaciono svetlo pozadi, vučna kuka, visina utovarne platforme: cca 1500 mm, vozilo može biti oblepljeno i/ili ispisano reklamama. SI82739 Naša ponuda je generalno bez novog TÜV pregleda. Ukoliko je potreban novi TÜV pregled, rado ćemo Vam poslati ponudu naših partnerskih radionica! Vozilo može biti oblepljeno i/ili ispisano reklamama. Primjenjuju se naši opšti uslovi isporuke i plaćanja. Rado ćemo Vam izraditi ponudu finansiranja ili lizinga za ovaj objekat. Molimo Vas da nas kontaktirate! Godpfxov I It Ns Am Hsuh

Stanje: novo, lastna masa: 7.950 kg, največja dovoljena obremenitev: 37.050 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Okrepljena izvedba, z zračno vzmetjo in dvigljivo osjo, manometer za merjenje obremenitve osi, dolžina zgornje ploščadi približno 4.140 mm, dolžina spodnje ploščadi približno 8.600 mm, višina nakladalne površine približno 900 mm, za vlečno vozilo z 2 ali 3 osmi, višina prednje stene približno 1.600 mm, 18 x žepi za prečke v zunanjem okvirju, 3 x prečne letve, 24 x pritrdilne točke, 4 pari ključavnic za kontejnerje za 2 x 20-ft ISO-kontejner ali 1 x 40-ft ISO-kontejner, doplačilo za aluminijaste rampe, cena: 2.200 €, rezervno kolo, cena: 300 €, – tiskarske napake, spremembe in napake so pridržane, ilustrativne slike – več podatkov na: !, Več podrobnosti: ! Gujdpfez Rlr Aox Am Hjh

Stanje: rabljeno, konfiguracija osi: > 3 osi, prva registracija: 01/2023, Leto izdelave: 2023, Število osi: 8 Tip osi: nihajne osi Krmiljenje: hidravlično Tip vzmetenja: hidravlično Pnevmatike: 245/70 R17.5 Premer kralja: 3,5" Barva: RAL 5009 azurno modra Dolžina gosičnega vratu: 3700 mm Skupna širina vozila: 2990 mm Dolžina nosilne površine: 15000 mm Teleskopsko: da / dolžina prvega izvlečnega segmenta: 8000 mm Višina sedla: 1415 mm Nosilnost sedla: 30.000 kg Nosilnost osi: 96.000 kg Gjdpez Ed D Esfx Am Hjuh Lastna teža: 36.200 kg Največja dovoljena masa: 126.000 kg Nosilnost: 89.800 kg