Polpriklopnik z nizko nakladalno ploščadjo

GOLDHOFER STZ-L3-37/80A 3x gelenkt 7,5m ausziehbar

Stanje: rabljeno, največja dovoljena obremenitev: 38.000 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2012, with air suspension, hydromechanical forced steering, single-extendable loading platform, STZ-L gooseneck - robust steel welded construction - formed loading platform 3,500 x 2,480 mm - hydromechanical forced steering (dual-circuit steering) in low-profile design (installation height 235mm) with adjustable guide elements - turntable-mounted fifth wheel plate with interchangeable 2” kingpin and adjustable steering wedge Loading platform - Single-extendable, designed as external-internal tube construction with fixed 1,000 mm front platform section - Extension stages locked via spring-actuated cylinders and conical pins Chassis - 3-axle air suspension chassis - BPW (Eco) axle assembly comprising three hydromechanically forced-steered steering-axle units - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Standard lift and lower valve for a minimum platform height of 825 mm or maximum of 1,025 mm - Loading height 1: 885 mm - Loading height 2: 925 mm Rear of vehicle - Straight design - Short rear overhang of 1,000mm from the center of the last axle - Rear mechanical support Brake system - Dual-line full air brake system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABS brake Special equipment - Central lubrication system "BekaMax" - Electric power unit - Radio remote control Technical data Gooseneck Platform (LxW): 3,500 x 2,480 mm Build height above fifth wheel: 235 mm Coupling height loaded: 1,300 mm Loading Platform Platform (LxW): 10,000 x 2,550 mm Extendable by 7,500 mm In increments up to (LxW): 17,500 x 2,550 mm Loaded platform height: 925 mm (+/- 100 mm) Dusdpeyxcpfjfx Aqxou 2nd driving position: 885 mm (+140/-60 mm) Steering 1st to 3rd axle hydromechanically forced-steered (dual-circuit steering)

Stanje: novo, lastna masa: 11.000 kg, največja dovoljena obremenitev: 38.500 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Load Area: - Extendable loading area with rear taper approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses fitted with square climbing strips 15 x 15 mm, including lower extensions - Between the 1st and 2nd axle, a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the bevel as well as protruding into the loading area for parking excavator dipper stick approx. 2,900 x 750 x 210/290 mm - 1 pair of lashing rings, installed flat at the front of the load area (LC 10,000 daN) - 5 pairs of folding lashing rings on the outside (LC 5,000 daN) - 2 pairs of folding lashing rings on the outside (LC 10,000 daN) - 2 pairs of lashing rings in the dipper stick recess (LC 5,000 daN) - Cut-outs in the outer frame of the load area for securing straps (LC 2,000 daN) - Incl. three-part removable galvanized covers over the wheel recesses – max. point load 3.5 t / pc. Two-piece Steel Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood surfacing - Ramp with hydraulically folding ramp sections, hydraulic lifting gear, and hydraulically adjustable Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 steering trailing axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tool kit - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 141 Accessories Included: - Mounts for warning signs left and right at the gooseneck and at the rear, each with socket - One spare wheel - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings at the galvanized front connector strip - 4 wheel chocks - Galvanized, extendable outriggers approx. 230 mm per side - Galvanized folding supports beneath the loading area bevel - Rear trailer bracket for rotating beacon - Cover plates for bridging the gap between ramps and load area - White reflective tape to EU regulations, sides and on extensions; rear in red - Electro-hydraulic unit installed at the rear beneath the loading area - Ramp control valves mounted on right trailer side Dedjup U Hzjpfx Aqxeuu - European reflective panels (red-yellow) on rear of trailer - Four extendable warning boards, approx. 423 x 423 mm, with position light - Bracket for rotating beacon on warning boards - Removable ALU side boards and rear board on gooseneck approx. 2,440 x 400 mm - Rear galvanized removable stakes (structure length approx. 2,560 mm) - 2 pairs of WADER container pockets in loading area for 20ft or 30ft container - 3 pairs of socket pockets for stakes 100 x 50 mm in outer frame of loading area - Removable, galvanized intermediate table with 1 pair of WADER container pockets - Square climbing strips 20 x 20 mm spaced every 200 mm on outer frame at loading bevelling - Painted sand layer on chequer plates of the gooseneck and loading area for anti-slip protection - 80 km/h speed stickers rear and both sides - Load manometer for axle load measurement, including load chart.

Stanje: rabljeno, največja dovoljena obremenitev: 38.000 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2009, with air suspension, hydromechanical forced steering, single-extendable loading platform, STZ-L gooseneck - robust steel welded construction - formed loading platform 3,500 x 2,480 mm - hydromechanical forced steering (dual-circuit steering) in low-profile design (installation height 235mm) with adjustable guide elements - turntable-mounted fifth wheel plate with interchangeable 2” kingpin and adjustable steering wedge Loading platform - Single-extendable, designed as external-internal tube construction with fixed 1,000 mm front platform section - Extension stages locked via spring-actuated cylinders and conical pins Chassis - 3-axle air suspension chassis - BPW (Eco) axle assembly comprising three hydromechanically forced-steered steering-axle units - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Standard lift and lower valve for a minimum platform height of 825 mm or maximum of 1,025 mm - Loading height 1: 885 mm - Loading height 2: 925 mm Rear of vehicle Dujdpfx Asyrzwtjqxeu - Straight design - Short rear overhang of 1,000mm from the center of the last axle - Rear mechanical support Brake system - Dual-line full air brake system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABS brake Special equipment - Central lubrication system "BekaMax" - Electric power unit - Radio remote control Technical data Gooseneck Platform (LxW): 3,500 x 2,480 mm Build height above fifth wheel: 235 mm Coupling height loaded: 1,300 mm Loading Platform Platform (LxW): 10,000 x 2,550 mm Extendable by 7,500 mm In increments up to (LxW): 17,500 x 2,550 mm Loaded platform height: 925 mm (+/- 100 mm) 2nd driving position: 885 mm (+140/-60 mm) Steering 1st to 3rd axle hydromechanically forced-steered (dual-circuit steering)

Stanje: rabljeno, največja dovoljena obremenitev: 38.000 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2009, with air suspension, hydromechanical forced steering, single-extendable loading platform, STZ-L gooseneck - robust steel welded construction - formed loading platform 3,500 x 2,480 mm - hydromechanical forced steering (dual-circuit steering) in low-profile design (installation height 235mm) with adjustable guide elements - turntable-mounted fifth wheel plate with interchangeable 2” kingpin and adjustable steering wedge Loading platform - Single-extendable, designed as external-internal tube construction with fixed 1,000 mm front platform section - Extension stages locked via spring-actuated cylinders and conical pins Chassis - 3-axle air suspension chassis - BPW (Eco) axle assembly comprising three hydromechanically forced-steered steering-axle units - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Standard lift and lower valve for a minimum platform height of 825 mm or maximum of 1,025 mm - Loading height 1: 885 mm - Loading height 2: 925 mm Rear of vehicle - Straight design - Short rear overhang of 1,000mm from the center of the last axle - Rear mechanical support Brake system - Dual-line full air brake system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABS brake Special equipment - Central lubrication system "BekaMax" - Electric power unit - Radio remote control Technical data Gooseneck Platform (LxW): 3,500 x 2,480 mm Build height above fifth wheel: 235 mm Coupling height loaded: 1,300 mm Loading Platform Platform (LxW): 10,000 x 2,550 mm Extendable by 7,500 mm Dedpfx Aqjyrzv Nexsuu In increments up to (LxW): 17,500 x 2,550 mm Loaded platform height: 925 mm (+/- 100 mm) 2nd driving position: 885 mm (+140/-60 mm) Steering 1st to 3rd axle hydromechanically forced-steered (dual-circuit steering)

Stanje: novo, lastna masa: 9.300 kg, največja dovoljena obremenitev: 30.100 kg, skupna masa: 39.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Extendable loading platform: - Loading platform, extendable execution with rear bevel approx. 1,000 mm x 8° - 5 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - Cutouts in the outer frame of the platform for attaching tie-down straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tyres: - BPW axles, hydro-mechanically forced steering - Technical axle load: 12,000 kg - Air suspension with raise/lower valve - Axle tool kit - TPMS tyre pressure monitoring system according to ECE R 141 - Tyres: 235/75 R17.5 3PMSF Accessories included: - 2" kingpin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection strip - 2 wheel chocks with holder on the front wall - One spare wheel with holder in front of the front wall - Electro-hydraulic unit - Rear axle steering, operable from front and rear via cable remote control with push buttons, with axle single-track monitoring - European reflective warning plates (red-yellow) at the rear of the trailer Dedpfsyxc Eyjx Aqxouu - White reflective tape according to EU regulations on the sides and on the extension, red at the rear - Gooseneck and rear left and right brackets for warning signs, including socket - Sliding hook-in bar for ALU loading ramps at the rear of the vehicle - One bracket for a rotating beacon at the rear of the trailer - Galvanized folding supports under the rear bevel of the loading platform - One mudguard at the rear of the trailer - Operating manual and documentation on USB stick - Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump protection cover - Removable ALU side boards and tailgate on the gooseneck approx. 2,440 x 400 mm - The rear galvanized stanchions are removable (body length approx. 2,560 mm) - 3 pairs of WADER container pockets in the loading platform for 1x 20ft, 1x 30ft or 1x 40ft container - 6 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform - One INOX toolbox 1,500 x 390 x 810 mm under the loading platform, right side in direction of travel - Four warning signs, extendable by approx. 400 mm, approx. 423 x 423 mm with a position light - On the warning signs a bracket for a rotating beacon - Radio remote control for rear axle steering, in addition to cable remote control, with indicator lights on receiver for single-track monitoring - On the checker plate surfaces on the gooseneck and loading platform, a painted sand layer as anti-slip protection - Speed sticker 80 km/h at the rear and on both sides - Axle load gauge for determining axle loads, including load diagram

Stanje: rabljeno, največja dovoljena obremenitev: 26.700 kg, skupna masa: 32.500 kg, konfiguracija osi: 2 osi, prva registracija: 02/2013, * Schmitz Cargobull Gotha SKI 18 SL * Zadnja mulda * 2-osni * FIN: WSK000001270258 Dedpfx Aolhp Rzeqxjuu * Lastna teža: 5.800 kg * Nosilnost: 26.700 kg * Skupna masa: 32.500 kg * Osna obremenitev: 26.700 kg * Obremenitev osi: 9.000 / 9.000 kg * Dolžina polpriklopnika: 8.775 mm * Širina polpriklopnika: 2.550 mm * Višina polpriklopnika: 3.280 mm * Pnevmatske gume: 385 / 65 R 22,5 * Cena na povpraševanje * Vse informacije brez garancije * Interna številka: 0376 Tel./WhatsApp: