Polpriklopnik z nizko nakladalno ploščadjo

GOLDHOFER STHP 8 (3+5)/GG 219 to/Pendelachsen /ausziehbar

Stanje: rabljeno, največja dovoljena obremenitev: 175.620 kg, skupna masa: 219.000 kg, konfiguracija osi: > 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendle axle units with remote control. Technical gross weight: 219,000 kg possible Technical payload: 175,620 kg possible Hydraulically suspended and 8-axle steered Goldhofer low-bed semi-trailer, type STHP 8 (3+5), consisting of 4 heavy-duty modules with detachable gooseneck and up to 5-meter extendable excavator deck including 4 wheel recesses with ABS, up to 175,620 kg technical payload possible. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck, type STH / ST Year of construction: 2002 Compatible with heavy-duty module undercarriages, with drive-over loading decks. Unladen weight approx. 5,900 kg Permissible fifth wheel load front: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" bolt Removable aluminium sideboards Fully hydraulically movable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty bogie module First registration: 14.11.2001 As a single module, technical gross weight: 108,000 kg, technical axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendle axles 8-fold, 24 wheels with tyres: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ± 60° Hydro-mechanical 2-circuit all-wheel forced steering integrated in the chassis, with maximum steering angle of axle units of 60°, integrated hydraulic oil tank Front and rear optimized pin-lug couplings for longitudinal combinations Single-tired pendle axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles Fodpoz N Nrkofx Af Uegh BPW axles with drum brake and ABS, technical axle load of 34 t at 5 km/h 3rd module: Extendable heavy-duty low-bed module – excavator bridge Year of construction: 2002 Internal dimensions approx. 7.50 meters length, 3.00 meters width, 0.40 meters loading height Build height 350 mm Extendable by approx. 5.00 meters – telescopic 4 wheel recesses with loading ramp module at the front Build height in wheel recess area approx. 150 mm Load capacity up to 80 t in the well and 175.6 t in the complete STHP8 (3+5) module possible Unladen weight: 11,900 kg Front and rear hydraulic pin lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty bogie module First registration: 04.01.2002 Technical gross weight: 115,000 kg possible, technical axle loads: 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible Single-tired hydraulic pendle axle units with 4 wheels per axle line, 20 wheels total, tyres: 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the tractor combination. A current manufacturer's certificate from Goldhofer for the special low-bed combination is available. The low-bed can be tested on our premises. Price NET plus 19% VAT. All details without guarantee. Errors and prior sale reserved. Internal stock no.: 2285 Listing also available in English.

Stanje: rabljeno, največja dovoljena obremenitev: 175.620 kg, skupna masa: 219.000 kg, konfiguracija osi: > 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendle axle units with remote control. Technical gross weight: 219,000 kg possible Technical payload: 175,620 kg possible Hydraulically suspended and 8-axle steered Goldhofer low-bed semi-trailer, type STHP 8 (3+5), consisting of 4 heavy-duty modules with detachable gooseneck and up to 5-meter extendable excavator deck including 4 wheel recesses with ABS, up to 175,620 kg technical payload possible. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck, type STH / ST Year of construction: 2002 Compatible with heavy-duty module undercarriages, with drive-over loading decks. Unladen weight approx. 5,900 kg Permissible fifth wheel load front: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" bolt Removable aluminium sideboards Fully hydraulically movable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty bogie module First registration: 14.11.2001 As a single module, technical gross weight: 108,000 kg, technical axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendle axles 8-fold, 24 wheels with tyres: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ± 60° Hydro-mechanical 2-circuit all-wheel forced steering integrated in the chassis, with maximum steering angle of axle units of 60°, integrated hydraulic oil tank Front and rear optimized pin-lug couplings for longitudinal combinations Single-tired pendle axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brake and ABS, technical axle load of 34 t at 5 km/h 3rd module: Extendable heavy-duty low-bed module – excavator bridge Year of construction: 2002 Internal dimensions approx. 7.50 meters length, 3.00 meters width, 0.40 meters loading height Build height 350 mm Extendable by approx. 5.00 meters – telescopic 4 wheel recesses with loading ramp module at the front Build height in wheel recess area approx. 150 mm Load capacity up to 80 t in the well and 175.6 t in the complete STHP8 (3+5) module possible Unladen weight: 11,900 kg Front and rear hydraulic pin lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty bogie module First registration: 04.01.2002 Technical gross weight: 115,000 kg possible, technical axle loads: 23,000 kg at 5 km/h possible Fedpfx Aez N Nrdof Uogh Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible Single-tired hydraulic pendle axle units with 4 wheels per axle line, 20 wheels total, tyres: 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the tractor combination. A current manufacturer's certificate from Goldhofer for the special low-bed combination is available. The low-bed can be tested on our premises. Price NET plus 19% VAT. All details without guarantee. Errors and prior sale reserved. Internal stock no.: 2285 Listing also available in English.

Stanje: rabljeno, največja dovoljena obremenitev: 175.620 kg, skupna masa: 219.000 kg, konfiguracija osi: > 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendulum axle units with radio remote control. Technical gross weight possible: 219,000 kg Fodpfx Afez N Nrqs Ujgh Technical payload possible: 175,620 kg Hydraulically suspended and 8-axle steered Goldhofer low-loader semi-trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with detachable gooseneck and extendable excavator deck up to 5 metres long, with 4 wheel recesses and ABS, technical payload up to 175,620 kg possible. Comprising the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture: 2002 Compatible with heavy-duty module chassis, drivable loading bridges. Unladen weight approx. 5,900 kg Permissible fifth wheel load at front: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin: 3.5" bolt Detachable aluminium side boards Fully hydraulically movable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module, technical gross weight: 108,000 kg, technical axle load: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. 8-fold hydraulic pendulum axles, 24 wheels, tyre size: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 metres Axle spacing: 1.5 metres Max steering angle: ±60° Chassis-integrated, hydromechanical 2-circuit all-wheel forced steering system with max. steering angle of the axle units of 60°, with integrated hydraulic oil tank Front and rear reinforced pin-and-eye coupling for longitudinal combinations Single wheel pendulum axle units, 8 wheels per axle line Hydraulic axle compensation ±300 mm, hydropneumatic gas spring suspension Hydraulic steering on all axles BPW axles with drum brakes and ABS, technical axle load 34 t at 5 km/h 3rd Module: Extendable low-bed heavy-duty module – excavator deck Year of manufacture: 2002 Internal dimensions approx. 7.50 m long, 3.00 m wide, 0.40 m loading height Construction height: 350 mm Extendable by approx. 5.00 m – telescopic 4 wheel recesses with ramp module at the front Construction height at wheel recesses approx. 150 mm Load up to 80 t on the low-bed and 175.6 t on the complete STHP8 (3+5) module possible. Unladen weight 11,900 kg Hydraulic bolt couplings with claw coupling adapter front and rear 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technical gross weight: 115,000 kg, technical axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-wheeled hydraulic pendulum axle units, 4 wheels per axle line, 20 wheels with 285/70 R 19.5 tyres Hydraulic axle compensation ±300 mm, hydropneumatic gas spring suspension Hydraulic steering on all axles Radio remote control for steering axles 5. Notes: Up to 3 different tractor combinations are possible with the 4 heavy-duty modules! Payloads will vary depending on tractor combination. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be inspected and tested at our premises. Price NET plus 19% VAT. All specifications without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285

Stanje: rabljeno, največja dovoljena obremenitev: 175.620 kg, skupna masa: 219.000 kg, konfiguracija osi: > 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendulum axle units with radio remote control. Technical gross weight possible: 219,000 kg Technical payload possible: 175,620 kg Hydraulically suspended and 8-axle steered Goldhofer low-loader semi-trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with detachable gooseneck and extendable excavator deck up to 5 metres long, with 4 wheel recesses and ABS, technical payload up to 175,620 kg possible. Comprising the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture: 2002 Compatible with heavy-duty module chassis, drivable loading bridges. Unladen weight approx. 5,900 kg Permissible fifth wheel load at front: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin: 3.5" bolt Detachable aluminium side boards Fully hydraulically movable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module, technical gross weight: 108,000 kg, technical axle load: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. 8-fold hydraulic pendulum axles, 24 wheels, tyre size: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 metres Axle spacing: 1.5 metres Max steering angle: ±60° Chassis-integrated, hydromechanical 2-circuit all-wheel forced steering system with max. steering angle of the axle units of 60°, with integrated hydraulic oil tank Front and rear reinforced pin-and-eye coupling for longitudinal combinations Single wheel pendulum axle units, 8 wheels per axle line Hydraulic axle compensation ±300 mm, hydropneumatic gas spring suspension Hydraulic steering on all axles BPW axles with drum brakes and ABS, technical axle load 34 t at 5 km/h 3rd Module: Extendable low-bed heavy-duty module – excavator deck Year of manufacture: 2002 Internal dimensions approx. 7.50 m long, 3.00 m wide, 0.40 m loading height Construction height: 350 mm Extendable by approx. 5.00 m – telescopic 4 wheel recesses with ramp module at the front Construction height at wheel recesses approx. 150 mm Load up to 80 t on the low-bed and 175.6 t on the complete STHP8 (3+5) module possible. Unladen weight 11,900 kg Hydraulic bolt couplings with claw coupling adapter front and rear 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technical gross weight: 115,000 kg, technical axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-wheeled hydraulic pendulum axle units, 4 wheels per axle line, 20 wheels with 285/70 R 19.5 tyres Hydraulic axle compensation ±300 mm, hydropneumatic gas spring suspension Fsdpfx Asz N Np Aof Usgh Hydraulic steering on all axles Radio remote control for steering axles 5. Notes: Up to 3 different tractor combinations are possible with the 4 heavy-duty modules! Payloads will vary depending on tractor combination. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be inspected and tested at our premises. Price NET plus 19% VAT. All specifications without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285

Stanje: rabljeno, največja dovoljena obremenitev: 175.620 kg, skupna masa: 219.000 kg, konfiguracija osi: > 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3+5) 8-axle hydraulic swing BPW axle assembly with remote control. Technically permissible total weight: 219,000 kg Payload: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed trailer, Type STHP (3+5), consisting of 4 heavy-duty modules with removable gooseneck, extendable up to 5 m telescopic excavator low-bed with 4 wheel recesses, ABS, payload up to 175,620 kg (technically possible). Comprising the following 4 individual heavy-duty module components: 1st Module: Hydraulic universal gooseneck, Type STH - Can be combined with heavy-duty platform modules and drive-over loading decks - Unladen weight: 5,900 kg - Permissible front fifth wheel load: 35,000 kg - Length: approx. 4.10 m - Saddle height: approx. 1.30 m - 3.5" king pin - Detachable aluminium side walls - Fully hydraulically manoeuvrable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty module Fgsdpfx Ajz N Np Nof Ujh - As single module: technically permissible total weight: 108,000 kg (axle loads up to 36,000 kg at 5 km/h) - Unladen weight: 10,350 kg - Technical payload as single module: 97,650 kg at 5 km/h - 8-fold hydraulic pendulum axles, 215/75/R17.5 tyres - Axle load: up to 25 t at 20 km/h - Vehicle width: 3 m - Axle spacing: 1.5 m - Max. steering angle: ±60° - Dual-circuit hydromechanical all-wheel forced steering (max. axle steering angle 60°) with integrated hydraulic tank - Optimised front/rear pin-plate coupling for longitudinal combination - Single-tyre pendulum axles, 8 wheels per axle line - Hydraulic axle compensation: ±300 mm, hydropneumatic suspension with gas pressure accumulator - Hydraulic steering of all axles - BPW axles with drum brakes and ABS, nominal axle load: 34 t at 5 km/h 3rd Module: Extendable heavy-duty low-bed/excavator deck - Year of manufacture: 2002 - Internal dimensions: approx. 7.50 m (length) x 3.00 m (width), loading height 0.40 m - Construction height: 350 mm - Extendable by approx. 5.00 m - Unladen weight: 11,900 kg - 4 wheel recesses, extendable module at the front section - Total height in wheel recess area: approx. 150 mm - Load capacity: up to 80 t on the low-bed, up to 175.6 t in full STHP 8 (3+5) configuration - Front and rear hydraulic bolt-plate couplings with claw adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty module - First registration: 04.01.2002 - Technically permissible total weight: 115,000 kg; axle loads: 23,000 kg at 5 km/h - Unladen weight: approx. 14,200 kg - Technical payload: up to 100,800 kg - Single-tyre hydraulic pendulum axles, 4 wheels per axle line, tyres: 20 x 285/70 R 19.5 - Hydraulic axle compensation: ±300 mm, hydropneumatic gas pressure accumulator suspension - Hydraulic steering on all axles - Radio remote control for steering axles Notes: - Up to 3 different train combinations possible with the 4 heavy-duty modules; payloads vary according to configuration - The low-bed can be viewed and tested at our premises - Current Goldhofer manufacturer’s certificate for special low-bed combination available Price: NET, plus 19% VAT. All information provided without guarantee. Subject to errors and prior sale. Internal reference number: 2285 Advert also available in complete German / Inserat auch komplett in Deutsch verfügbar

Stanje: rabljeno, največja dovoljena obremenitev: 175.620 kg, skupna masa: 219.000 kg, konfiguracija osi: > 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendulum axle units with radio remote control. Technical gross weight possible: 219,000 kg Technical payload possible: 175,620 kg Hydraulically suspended and 8-axle steered Goldhofer low-loader semi-trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with detachable gooseneck and extendable excavator deck up to 5 metres long, with 4 wheel recesses and ABS, technical payload up to 175,620 kg possible. Comprising the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture: 2002 Compatible with heavy-duty module chassis, drivable loading bridges. Unladen weight approx. 5,900 kg Permissible fifth wheel load at front: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin: 3.5" bolt Detachable aluminium side boards Fully hydraulically movable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module, technical gross weight: 108,000 kg, technical axle load: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. 8-fold hydraulic pendulum axles, 24 wheels, tyre size: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 metres Axle spacing: 1.5 metres Max steering angle: ±60° Chassis-integrated, hydromechanical 2-circuit all-wheel forced steering system with max. steering angle of the axle units of 60°, with integrated hydraulic oil tank Front and rear reinforced pin-and-eye coupling for longitudinal combinations Single wheel pendulum axle units, 8 wheels per axle line Hydraulic axle compensation ±300 mm, hydropneumatic gas spring suspension Hydraulic steering on all axles BPW axles with drum brakes and ABS, technical axle load 34 t at 5 km/h 3rd Module: Extendable low-bed heavy-duty module – excavator deck Year of manufacture: 2002 Internal dimensions approx. 7.50 m long, 3.00 m wide, 0.40 m loading height Construction height: 350 mm Extendable by approx. 5.00 m – telescopic 4 wheel recesses with ramp module at the front Construction height at wheel recesses approx. 150 mm Load up to 80 t on the low-bed and 175.6 t on the complete STHP8 (3+5) module possible. Unladen weight 11,900 kg Hydraulic bolt couplings with claw coupling adapter front and rear 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module Fedpfx Aez N Nqmjf Ujgh First registration: 04.01.2002 Technical gross weight: 115,000 kg, technical axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-wheeled hydraulic pendulum axle units, 4 wheels per axle line, 20 wheels with 285/70 R 19.5 tyres Hydraulic axle compensation ±300 mm, hydropneumatic gas spring suspension Hydraulic steering on all axles Radio remote control for steering axles 5. Notes: Up to 3 different tractor combinations are possible with the 4 heavy-duty modules! Payloads will vary depending on tractor combination. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be inspected and tested at our premises. Price NET plus 19% VAT. All specifications without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285

Stanje: rabljeno, največja dovoljena obremenitev: 175.620 kg, skupna masa: 219.000 kg, konfiguracija osi: > 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendle axle units with remote control. Technical gross weight: 219,000 kg possible Technical payload: 175,620 kg possible Hydraulically suspended and 8-axle steered Goldhofer low-bed semi-trailer, type STHP 8 (3+5), consisting of 4 heavy-duty modules with detachable gooseneck and up to 5-meter extendable excavator deck including 4 wheel recesses with ABS, up to 175,620 kg technical payload possible. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck, type STH / ST Fedsz N Nqaopfx Af Uogh Year of construction: 2002 Compatible with heavy-duty module undercarriages, with drive-over loading decks. Unladen weight approx. 5,900 kg Permissible fifth wheel load front: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" bolt Removable aluminium sideboards Fully hydraulically movable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty bogie module First registration: 14.11.2001 As a single module, technical gross weight: 108,000 kg, technical axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendle axles 8-fold, 24 wheels with tyres: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ± 60° Hydro-mechanical 2-circuit all-wheel forced steering integrated in the chassis, with maximum steering angle of axle units of 60°, integrated hydraulic oil tank Front and rear optimized pin-lug couplings for longitudinal combinations Single-tired pendle axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brake and ABS, technical axle load of 34 t at 5 km/h 3rd module: Extendable heavy-duty low-bed module – excavator bridge Year of construction: 2002 Internal dimensions approx. 7.50 meters length, 3.00 meters width, 0.40 meters loading height Build height 350 mm Extendable by approx. 5.00 meters – telescopic 4 wheel recesses with loading ramp module at the front Build height in wheel recess area approx. 150 mm Load capacity up to 80 t in the well and 175.6 t in the complete STHP8 (3+5) module possible Unladen weight: 11,900 kg Front and rear hydraulic pin lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty bogie module First registration: 04.01.2002 Technical gross weight: 115,000 kg possible, technical axle loads: 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible Single-tired hydraulic pendle axle units with 4 wheels per axle line, 20 wheels total, tyres: 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the tractor combination. A current manufacturer's certificate from Goldhofer for the special low-bed combination is available. The low-bed can be tested on our premises. Price NET plus 19% VAT. All details without guarantee. Errors and prior sale reserved. Internal stock no.: 2285 Listing also available in English.

Stanje: rabljeno, največja dovoljena obremenitev: 175.620 kg, skupna masa: 219.000 kg, konfiguracija osi: > 3 osi, prva registracija: 01/2002, Oprema: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendle axle units with remote control. Technical gross weight: 219,000 kg possible Technical payload: 175,620 kg possible Hydraulically suspended and 8-axle steered Goldhofer low-bed semi-trailer, type STHP 8 (3+5), consisting of 4 heavy-duty modules with detachable gooseneck and up to 5-meter extendable excavator deck including 4 wheel recesses with ABS, up to 175,620 kg technical payload possible. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck, type STH / ST Year of construction: 2002 Compatible with heavy-duty module undercarriages, with drive-over loading decks. Unladen weight approx. 5,900 kg Permissible fifth wheel load front: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" bolt Removable aluminium sideboards Fully hydraulically movable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty bogie module First registration: 14.11.2001 As a single module, technical gross weight: 108,000 kg, technical axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendle axles 8-fold, 24 wheels with tyres: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ± 60° Hydro-mechanical 2-circuit all-wheel forced steering integrated in the chassis, with maximum steering angle of axle units of 60°, integrated hydraulic oil tank Front and rear optimized pin-lug couplings for longitudinal combinations Single-tired pendle axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brake and ABS, technical axle load of 34 t at 5 km/h 3rd module: Extendable heavy-duty low-bed module – excavator bridge Year of construction: 2002 Internal dimensions approx. 7.50 meters length, 3.00 meters width, 0.40 meters loading height Build height 350 mm Extendable by approx. 5.00 meters – telescopic 4 wheel recesses with loading ramp module at the front Build height in wheel recess area approx. 150 mm Load capacity up to 80 t in the well and 175.6 t in the complete STHP8 (3+5) module possible Unladen weight: 11,900 kg Front and rear hydraulic pin lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty bogie module First registration: 04.01.2002 Technical gross weight: 115,000 kg possible, technical axle loads: 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible Single-tired hydraulic pendle axle units with 4 wheels per axle line, 20 wheels total, tyres: 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering for all axles Remote control for steering axles Fgedpfx Afoz N Npvo Uoh 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the tractor combination. A current manufacturer's certificate from Goldhofer for the special low-bed combination is available. The low-bed can be tested on our premises. Price NET plus 19% VAT. All details without guarantee. Errors and prior sale reserved. Internal stock no.: 2285 Listing also available in English.