Müller-Mitteltal 14,4 To. Tieflader, Luftgefed. Mit Auffahrrampen nakup rabljenega (35.023)

Stanje: novo, največja dovoljena obremenitev: 23.700 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * Tire pressure monitoring system (RDÜ) * Emergency release mechanism for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with raising and lowering function, equipped with Ride-to-Ride (RtR) valve * Smart-Board as infotool * Lateral underrun protection * Pivoting support legs at the rear of the chassis frame * Mechanically adjustable warning panel sets at front and rear * Front axle with closed plastic mudguards, rear axle with straight hot-dip galvanized steel fenders, both with spray protection * Reflective contour marking strips on sides and rear * Folding cover (hot-dip galvanized) for the toolbox on the turntable platform * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye; height adjustment via tension spring and turnbuckle * 15-pin electrical connector * Four stake pockets per side, each with 2 t lashing capability * Load securing package includes: 2 lashing rings (6.4 t) at the front left & right on the main frame of the turntable platform; 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions and integrated into the outer frame—13.4 t at the corners, otherwise 10 t * 6 pairs of mechanical folding extensions for up to 3 m overall width (not at the sloped rear end) * Widening planks stowed in the center of the load area * Hydraulic, one-piece, laterally adjustable ramps (approx. 3,000 x 720 mm) Fpsdpfxsl Tpwys Al Hsg * Excavator arm rest, length approx. 2,100 mm from rear axle to end cross-member (2 pairs of 6.4 t lashing rings integrated on the sides of the excavator arm rest) * Load area above turntable: approx. 1,960 x 2,520 mm * Loading height unladen: approx. 1,070 mm * Rear load area: approx. 6,500 x 2,520 mm * Loading height unladen: approx. 910 mm (including 860 mm ramp incline) * Chassis, turntable, drawbar, folding extensions, and ramps hot-dip galvanized * Axles, turntable, air tanks, etc. painted in black * Tires: 235/75 R 17.5 * Payload approx. 24,000 kg at 30,000 kg gross vehicle weight * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. CW 32 / 2026 * Sample photos

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS brake system * TPMS tyre pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 ton BPW Eco axles * Parabolic springs * Mechanical rear axle compensation * Lateral underrun protection * Rear swing-down supports on chassis frame * Mechanically adjustable warning board kits front and rear Fedpfx Alel Thxdo Hspg * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with splash guards * Contour tape, reflective on sides and rear * Hinged lid (hot-dip galvanized) for toolbox mounted on turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at rear * Drawbar with 40 mm towing eye and height adjustment via spring and turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not included), with integrated lashing options * Load securing package consisting of: 2 lashing points (6.4 t) front left & right on main beam of turntable platform, 5 pairs of UVV-compliant lashing rings, pivotable and lowerable, loadable in all directions and integrated into the outer frame—at corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for a total width of 3 m (not in rear bevel) * Widening boards positioned in centre of loading area * Excavator arm trough over rear axle to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at sides of excavator arm trough) * Single-piece hydraulic access ramps (approx. 3,000 x 720 mm) * 4-way control block for later retrofit of hydraulic ramp shifting * Mechanical lateral ramp shifting * Loading area over turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach angle) * Chassis, turntable, drawbar and access ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black * 235/75 R 17.5 twin tyres * Unladen weight 5,900 kg * Permissible gross weight of 30,000 kg technically possible * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing supports at the rear of the chassis frame * Mechanically adjustable warning board sets at front and rear * Front axle: enclosed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for toolbox in the bogie platform * Multi-voltage system * LED rear lights * Rotating beacon (removable) at rear * Drawbar with 40 mm towing eye and height adjustment by draw spring & turnbuckle * 15-pin electrical connector * Four lashing pocket sockets per side (no stakes included) with simultaneous lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the bogie platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and embedded in the outer frame - 13.4 t in the corners, otherwise 10 t Fsdpfx Asx Ipbgel Hopg * 6 pairs of mechanical folding outriggers for 3 m total width (not in rear slope section) * Widening planks stored in the middle of the loading area * Excavator boom rest over rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator boom rest) * Hydraulic, one-piece drive-on ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable, lateral ramp displacement * Loading area above slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, drawbar and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, etc., painted in black shade * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * -- technically permissible gross weight: 30,000 kg -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from approx. week 36/2026

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle hydraulically steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lower function as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED flashing beacon, rear left ----General attachments: * Side underrun protection * Landing gears in the front and mechanical swing supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder mounted on the chassis, right-hand side ----Low-loader platform: * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized steel, width = 2,480 mm x height = 500 mm x length = 665 mm, with folding lid * 400 mm high aluminum sideboards (RAL 9010 pure white) on both sides of the fifth wheel platform, foldable and removable * Rear wall – 150 mm high, slotted in * Rear slope on the fifth wheel platform down to the low-bed area, approx. 700 mm long * Fifth wheel platform fitted with 50 mm wooden planks, low-bed area with 60 mm wooden planks * Tread plate above the axles ----Width extensions: * 8 x mechanical folding width extensions to a total width of 3 m, except in the rear slope area (extension planks available with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages front and rear ----Load securing (lashing package): * On the fifth wheel platform, 2 x 6.3 t lashing eyes each as well as 3 x 5 t lashing bars on each side in the outer frame * In the low-bed area, 2 x 13.4 t lashing rings on each side as well as 4 x 10 t lashing rings, swiveling and retractable, integrated into the outer frame * 2 x 6.4 t lashing eyes on each side and 1 lashing eye at the rear in the excavator trough * 2 x container locks directly after the kick-up section in the low-bed platform ----Excavator trough: * Excavator trough from end of last rigid axle over steering axle up to the end brace, continuous, with internal reinforcement profile, approx. L = 2,450 mm x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * The outer board of the ramp is made from 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacities in the truck from over 40 l to 120 l/min) ----Loading dimensions: * Loading area of fifth wheel platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) Fpjdsl Tnvgspfx Al Hjg ----Coupling height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear swing supports, extension consoles hot-dip galvanized * Axles, landing gears, air tanks painted in black tone * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may contain equipment not included with the offered v

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalizer * Lateral underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning sign kits front and rear * Front (closed) plastic mudguards and straight, galvanized steel panel mudguards at the rear, each with spray protection * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for toolbox in the bogie platform * Multi-voltage system * LED tail lights * Removable revolving beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical socket * Four stake pockets per side (no stakes included), each with integrated lashing points * Load securing package includes: 2 heavy-duty lashing rings (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV folding and retractable lashing rings, loadable in all directions and integrated into the outer frame (corners rated for 13.4 t and otherwise 10 t) * 6 pairs of mechanical folding outriggers for 3 m total width (not in the rear taper) * Widening planks stored in the center of the loading platform * Excavator arm rest above the rear axle up to the end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at the sides of the excavator arm rest) * Single-piece hydraulic loading ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable ramps (side shifting) Fodpfx Ajx Ipb Hjl Hepg * Loading area above turntable: approx. 1,960 x 2,520 mm * Loading height unladen: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach incline) * Chassis, bogie, drawbar, and loading ramps are hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Unladen weight: 5,900 kg * Technically permissible gross weight: up to 30,000 kg * The vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Available from approx. calendar week 36/2026 *

Stanje: novo, največja dovoljena obremenitev: 14.620 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * RA-T 18.0 / 018: * Wabco EBS-E (electronic braking system) * RDÜ tyre pressure monitoring system * Emergency release for spring brake cylinders * Disc brakes * 2 x 10 t BPW wide-track axles * Air suspension (automatic lowering when brake is uncoupled) * Drawbar approx. 2,300 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Plastic toolbox 450 x 470 mm mounted right side * Side-mounted mesh box 1,000 x 500 x 5000 mm * Enclosed plastic mudguards front & rear * Closed side underrun protection, suitable as advertising panel * Rear underrun protection * Rear plastic anti-collision buffers * Rear ADR plate * 15-pin electrical connector * LED tail lights * Track length approx. 6,830 mm * Pneumatic 4-point clamping lock * Mechanically adjustable stop brackets (2 positions) front left and right on the guide tracks * 265/70 R 19.5 twin tyres * Unladen weight: 3,220 kg * --Permissible gross weight technically up to 20,000 kg-- * Ride height loaded: approx. 1,130 mm * Suitable for container lengths of 5,500 – 7,000 mm Fsdpfev Nulzox Al Hspg * Hot-dip galvanized chassis * Air tanks, axles, turntable, and drawbar * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. week 29 / 2026

Stanje: novo, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA 18.0: * 2-in-1: Suitable for swap containers (Abrollbehälter) and as low-loader trailer ----Braking System: * EBS electronic braking system * Emergency release facility for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10-ton axles ----Suspension: * Air suspension with lift and lower system and RTR valve ----Drawbar: * Drawbar 2,000 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * Tire pressure monitoring system, display option in truck via EBS signal (no truck-side installation required) * LED rear lights 12 / 24 V * 15-pin power connector Fodpfx Aol Tq Nmsl Hjpg ----General Attachments: * Tool box, powder-coated steel, approx. 1,000 x 300 x 600 mm * Storage box for container net, galvanized sheet metal, 960 x 300 x 450/400 mm * Reflective contour tape on sides and rear * Side underrun protection * Plastic quarter mudguards with splash guards * Rear plastic buffer bumper * Foldable 'A' sign at the rear ----Loading Platform: * Main frame with raised outer frame to guide swap containers * Steel sheet floor with recesses for rollers in the bogie area * Container length possible from 5,500 to 7,000 mm * Pneumatic 4-point clamping lock and mechanical plug-in stops in the running channel at the front, securing certificate according to DIN 30722-1 * Weld bead as anti-slip covering in the inclined running area * Mechanical drop-down supports at the rear ----Load Securing: * 1 pair 10 t UVV lashing rings at the front wall carrier * 3 pairs 10 t UVV lashing rings on each side of the outer frame * Each side with 4 x 2 t cloverleaf lashing eyes * 4 x 8 t recessed lashing brackets in the outer frame ----Ramps: * 1 pair aluminum loading ramps (10.6 t/pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) ----Paintwork: * Chassis, bogie, locking elements, rear drop-supports hot-dip galvanized * Drawbar, axles, and air tanks painted in a black shade ----Additional Info: * New vehicle, no initial registration, full manufacturer warranty * Subject to errors and prior sale * Sample images ----Delivery Time: * Available approx. from KW 43 / 2026

Stanje: novo, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA 18.0: * 2 in 1 = for roll-off containers and as low-bed trailer ----Braking system: * EBS electronic braking system * Emergency release for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 ton axles ----Suspension: * Air suspension with lift and lowering system, including RTR valve ----Drawbar: * Drawbar, 2,000 mm long with 40 mm towing eye and height adjustment ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck via EBS signal (no truck-side installation required) * LED tail lights 12 / 24 V * 15-pin power connector ----General attachments: * Tool box made from powder-coated sheet steel, approx. 1,000 x 300 x 600 mm * Storage box for container net made from galvanized sheet, 960 x 300 x 450/400 mm * Reflective contour marking tape on sides and rear * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear bumper buffers * Foldable rear A-board ----Loading area: * Main frame with raised outer rails to guide the roll-off containers * Steel floor plate with roller recesses in the bogie area * Container length of 5,500 - 7,000 mm possible * Pneumatic 4-way clamp lock, as well as mechanical plug-in stop angles at the front of the guide track, load securing certificate according to DIN 30722-1 * Weld bead as anti-slip coating in the ramp area * Mechanical drop-down supports at the rear ----Load securing: * 1 pair of 10 ton UVV lashing rings at the front on the bulkhead carrier * 3 pairs of 10 ton UVV lashing rings on the outer frame (side) Fodpfx Alsl Tpc Ae Hspg * 4 pairs of 2 ton side lashing eyes with cloverleaf design on each side * 4 x 8 ton recessed lashing brackets in the outer frame ----Ramps: * 1 pair of aluminum access ramps (10.6 tons/pair) 2,800 x 470 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Paintwork: * Chassis, bogie, locking parts, rear drop-down supports hot-dip galvanized * Drawbar, axles, air tanks painted in black ----Information: * New vehicle without first registration, with full manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery time: * Available from approx. week 43 / 2026

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with steering function and electro-pneumatic steering lock ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * Smartboard operator panel mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General attachments: * Side underrun protection * Landing legs at the front and mechanical swing supports at rear of chassis * Straight steel mudguards * Spare wheel carrier mounted under chassis, right side ----Low-loader platform: * Gooseneck platform with 45° chamfered front corners and tool box at the front made of galvanized steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high aluminum side boards (RAL 9010 pure white) foldable and removable, along the sides of the gooseneck platform * Rear panel 150 mm high, plug-in * Rear slope on the gooseneck platform leading to low-bed, approx. 700 mm long * Gooseneck platform with 50 mm wooden planks; low-bed platform with 60 mm wooden planks * Tread plate over the axles ----Extensions: * 8 x mechanical folding extensions to a total width of 3 m (not on the rear slope, extension planks available with storage on gooseneck platform) * Mechanically adjustable warning panel sets, front and rear ----Load securing (Lashing package): * On the gooseneck platform: 2 x 6.3 t lashing rings per side and 3 x 5 t lashing bars per side on the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, swivel and lowerable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side and 1 lashing ring at the rear, in the excavator-arm recess Fpedpspk D I Aefx Al Hjg * 2 x container locks immediately after the step in the low-bed platform ----Excavator-arm recess: * Continuous from the end of the last rigid axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access ramps: * Mechanical one-piece, hot-dip galvanized hydraulic access ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * Quadruple control block for future retrofitting of hydraulically lateral shifting ramps by customer * The outer plank on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output of 40 up to 120 liters/min in the truck) ----Loading dimensions: * Gooseneck platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach slope) ----Fifth wheel height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paint/Finish: * Chassis, access ramps, rear folding supports, and extension brackets are hot-dip galvanized * Axles, landing legs, and air reservoirs are painted in a shade of black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Sample images may show equipment not included in the offered vehicle ----Delivery time: * Available from week 38/2026

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs Fpodpfjl Th Adsx Al Hjg * Mechanical axle compensation at rear * Side underrun protection * Pivoting supports at the rear on chassis frame * Mechanically adjustable warning sign packages front and rear * Front closed plastic mudguards and rear straight galvanized steel skirts, each with splash protection * Reflective contour tape on sides and rear * Fold-down (hot-dip galvanized) lid for toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at rear * Drawbar with 40 mm draw eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * 4 stake pockets on each side (stakes not included), with simultaneous lashing facility * Load securing package (La-Si-Paket) comprising: 2 lashing eyes (6.4 t) front left & right on main frame of turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions and recessed into outer frame - in the corners rated to 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in rear inclined section) * Extension boards stowed in the center of the loading area * Excavator arm rest over rear axle up to end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Hydraulic one-piece ramps (approx. 3,000 x 720 mm) * 4-way control block for future retrofitting of hydraulic ramp shift * Mechanical lateral ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unloaded loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unloaded loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tank, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 23.700 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders Fedjl Tq Euopfx Al Hopg * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lift/lower function and RtR valve * Smart-Board as infotool * Side underrun protection * Swivel supports at rear chassis frame * Mechanically adjustable warning panel sets front and rear * Front closed plastic mudguards and rear straight galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Hinged (hot-dip galvanized) toolbox lid on bogie platform * LED tail lights * Removable rear amber beacon * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin electrical connector * Four side stake pockets each with integrated 2 t lashing points * Load securing package consisting of: 2 lashing rings (6.4 t) at front left & right on main frame of bogie platform, 5 pairs of UVV-compliant swivel and lowerable lashing rings loadable in all directions and embedded in external frame – at corners up to 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not in rear tapered section) * Widening planks stored in center of loading area * Hydraulic single-section loading ramps (approx. 3,000 x 720 mm), laterally adjustable * Digger arm rest above rear axle up to crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on side of digger arm rest) * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach ramp) * Chassis, bogie, drawbar, folding wideners & loading ramps hot-dip galvanized * Axles, turntable, air tanks, etc. painted in black * Tires 235/75 R 17.5 * Payload approx. 24,000 kg at 30,000 kg gross weight * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from approx. calendar week 32 / 2026 * Sample images

Stanje: rabljeno, največja dovoljena obremenitev: 4.960 kg, skupna masa: 10.500 kg, prva registracija: 04/1993, naslednji pregled (TÜV): 01/2026, dolžina tovornega prostora: 6.260 mm, širina tovornega prostora: 2.430 mm, višina nakladalnega prostora: 2.430 mm, prostornina tovornega prostora: 37 m³, Oprema: ABS, dvižna zadnja plošča, 2-axle tandem refrigerated trailer, 7 m, with 1 ton tail lift. * THERMOKING LND-II MAX (diesel engine) and stand-by cooling, 380 V ELECTRIC * Vehicle number for customer inquiries: 4593 * Tail lift * Air suspension * EBS (Electronic Braking System) * Anti-lock braking system (ABS) No liability for printing or typographical errors. Sale exclusively to commercial customers. Subject to prior sale and errors. Changes, prior sale, and errors are expressly reserved. The description serves solely for the identification of the vehicle and does not constitute a warranty in the legal sense of the purchase contract. The purchase contract description is binding. * TOP SERVICE & QUALITY * We are happy to provide you with a leasing, financing, or hire-purchase offer Guarantee insurance available upon request from the insurer * TÜV inspection / UVV LBW (tail lift safety test) / tachograph inspection and OBU (On-board Unit) installation can be arranged by our local partners * Export license plates for 30 days available All export documents can be provided, but must be requested individually Fjdpfxoykxflo Al Hepg * Toll collection for Toll Collect can be arranged in-house * Free transfer from Stuttgart airport or Metzingen (Württ) railway station * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit us on our website at * Over 200 vehicles always in stock

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, prva registracija: 10/2013, skupna širina: 2.750 mm, Leto izdelave: 2013, Müller Mitteltal ITS-VLL 30.0 Profi Low Loader | 3-Axle | Hydraulic Low-Loading Platform | 48 t Gross Vehicle Weight | 275 cm Wide Fpjdpfx Aloy I Si Tj Heg The extremely robust and stable Müller Mitteltal ITS-VLL 30.0 Profi low loader is ideally suited for transporting machinery, construction equipment, and heavy-duty devices. It is renowned for its sturdy construction and reliability. Technical Specifications: Brand: Müller Mitteltal Model: ITS-VLL 30.0 Profi Chassis Number (VIN): WMM00000D0057250 Permissible Gross Weight: 48,000 kg Axle Configuration: 3 Axles Axle Loads: - Axle 1: 10,000 kg - Axle 2: 10,000 kg - Axle 3: 10,000 kg Permissible Rolling Load: 18,000 kg Loading Platform: Low-level loading (low loader design) Loading Ramps: Hydraulically operated Low-loading Platform: Height hydraulically adjustable (up/down) Tyres: Good condition Construction: All-steel chassis Maximum Speed: 80 km/h Features & Options: - Heavy-duty low loader design - Hydraulic height-adjustable low-loading platform - Hydraulic rear loading ramps - Wide (275 cm) and stable loading area - Suitable for excavators, rollers, cranes, etc. Robust construction, immediately ready for use Condition: The trailer is used but fully functional and shows age- and use-related wear. Technically, it is a robust and reliable equipment transporter. Ready for immediate operation – ideal for transport companies and construction firms. For further information or to arrange a viewing, please contact us. = Further Information = Axle Configuration Rear Axle 1: Twin tires; Max. axle load: 10,000 kg; Steerable Rear Axle 2: Twin tires; Max. axle load: 10,000 kg; Steerable Rear Axle 3: Twin tires; Max. axle load: 10,000 kg; Steerable Weights Unladen weight: 14,500 kg Payload: 33,500 kg gross vehicle weight (GVW): 48,000 kg Maintenance, History and Condition APK (Roadworthiness test): valid until 02/2027 Technical condition: very good Visual condition: very good Financial Information Price: On request Further Information Please contact Klaas Gerrits or Henk Gerrits for further information.

Stanje: rabljeno, največja dovoljena obremenitev: 13.830 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2020, naslednji pregled (TÜV): 11/2026, Oprema: ABS, Nemško vozilo iz prve roke brez nesreč Stranske stranice iz aluminija SAF osi Bobnaste zavore dobro vzdrževano stanje najem, nakup, najem z odkupom polni servis najem od 590 EUR mesečno neto (cene najema so odvisne od trajanja pogodbe) vse informacije pod Fpedpfx Alsy Haz Us Hsg Primer najema z odkupom: 479 EUR mesečno neto pri trajanju 36 mesecev, posebna najemnina 5.000 EUR neto in končna rata 2.000 EUR neto. Vse cene so neto, brez DDV in pod pogojem pozitivne kreditne ocene.

Stanje: rabljeno, lastna masa: 3.110 kg, največja dovoljena obremenitev: 9.490 kg, skupna masa: 12.600 kg, konfiguracija osi: 2 osi, prva registracija: 05/2016, naslednji pregled (TÜV): 02/2025, dolžina tovornega prostora: 4.550 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 600 mm, vzmetenje: jeklo, velikost pnevmatike: 285/70R19.5, barva: modra, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, steel body, 2 axles, turntable trailer, leaf suspension, ABS (anti-lock braking system), lashing eyes, storage box, pendulum flaps. Body: 2-axle 3-way tipper trailer, Gigant axles, drum brakes, hot-dip galvanized frame! Fpodpfx Aewth Iisl Hjg Loading height approx. 1290 mm! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors excepted!

Stanje: novo, največja dovoljena obremenitev: 6.900 kg, skupna masa: 9.900 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9.9 ML: * TPMS (Tire Pressure Monitoring System) * EBS braking system * Drum brake * BPW axle * Parabolic springs * Front support winch * Spring-assisted square tube supports at the rear with base plate and safety locking pins for various support heights * Drawbar with 40 mm bolted towing eye (height-adjustable ___ mm) * 15-pin power plug * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross members * Closed steel mudguards with splash protection * Closed lateral underride guard usable as advertising space * Plastic toolbox with base insert (horizontal installation) approx. 500 x 350 x 400 mm * Swiveling cable drum structure; inner width between drum arms 1,700 mm, with clamp lock for drum securing at the ends of the carrier arms, plus central claw locking device for securing the cable drum structure to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and adjustable rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, centering, and rotating ends Fpedsxyniwjpfx Al Hjg * 1 pair of polyamide centering cones, stepwise profiled * Hydraulic supply and return lines * Steel construction and hydraulics prepared for retrofit of a separate engine * 315/80 R 22.5 tires * Unladen weight: 2,690 kg * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: rabljeno, konfiguracija osi: 3 osi, vzmetenje: parabolično listje (vzmet), velikost pnevmatike: 235-75R17.5, Leto izdelave: 2010, 3-osni nizek priklopnik, dostopen od zadaj. Dovoljena skupna masa 30.000 kg, nosilnost 22.700 kg. Nakladalna površina 8.900 mm (7.000 + 1.900) x 2.550 mm, opozorilni paket za prekomerno širino, 12 pritrdilnih ušes ter 8 žepov za stebričke z možnostjo istočasnega pritrjevanja, 6 orodnih zabojev. Dvodelne hidravlične rampe cca. 2.100+2.000 x 800 mm z gumijasto oblogo, hidravlično zadnjo podporo. BPW osi, EBS, parabolično vzmetenje z izravnalno enoto, pnevmatike 235-75 R 17.5. Pokrivljena vlečna roka, premična vlečna kljuka 40+50 mm. 2-cevni zračni (duomatik) in 2-cevni hidravlični priključek, 24 voltov. Višina nakladanja praznega vozila cca. 910 mm. Barva oranžna. Tehnični pregled veljaven do 03-2027. = Dodatne informacije = Fpjdpfxsy Evvls Al Hog Dimenzije pnevmatik: 235-75R17.5 Vzmetenje: parabolično vzmetenje Lastna masa: 7.300 kg Nosilnost: 22.700 kg Skupna dovoljena masa: 30.000 kg Država proizvodnje: DE Za več informacij se obrnite na Jan-Marc Schwickert.

Stanje: rabljeno, lastna masa: 2.700 kg, največja dovoljena obremenitev: 7.300 kg, skupna masa: 10.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2006, dolžina tovornega prostora: 4.500 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 1.000 mm, vzmetenje: jeklo, velikost pnevmatike: 245/70R19.5, barva: oranžna, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, steel body, leaf suspension, 2 axles, BPW axles, tandem, lashing eyes, underrun protection, front support, swinging side gates. Body: 3-way tipper trailer, steel side walls pendulum-mounted and foldable, 2x BPW axles, drum brakes! Fsdpfsytxx Rex Al Hopg Loading height approx. 1040 mm. Side walls foldable at the top and bottom! ACCESSORIES INFORMATION WITHOUT GUARANTEE. Subject to changes, prior sale, and errors.

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 02/1992, Leto izdelave: 1992, Oprema: ABS, Müller-Mitteltal Abrollanhänger Nemško vozilo = Dodatne informacije = Lastna masa: 3.140 kg Fpjdpfxjxt Sd Se Al Hog Nosilnost: 14.860 kg Skupna dovoljena masa: 18.000 kg Prodajna cena: € 1.500, US$ 1.767

Stanje: novo, največja dovoljena obremenitev: 20.500 kg, skupna masa: 27.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TR 27.0 Platform: Fedpfsr Dpzxox Al Hepg * EBS (Electronic Braking System) * Emergency release system for spring-loaded brake cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lift and lowering device including RTR function * First axle liftable * Last axle is self-steering trailing axle with electro-pneumatic steering lock via reverse gear PIN (Steering lock for trailing axle activated from the tractor for maneuvering purposes—no truck-side installation required—wired to PIN 10 in the 15-pin connector, only for maneuvering and not for use on public roads) * SmartBoard control unit as infotool with pressure sensors for displaying total axle load * Tire pressure monitoring with readout in the truck via EBS signal, no truck-side installation required * Fixed center drawbar with 50 mm flange drawbar eye (loaded 900 mm, mm height adjustment at the head plate) * Mechanical landing gear at the front, mechanical swivel supports at the rear chassis * Hydraulic flow divider * Continuous side walls (without center stanchion) up to the drive-on slope * Folding rear stanchions * Steel rear wall slotted in before rear stanchions * Mechanically adjustable warning panel kit front and rear * Toolboxes made of galvanized steel sheet—black powder-coated—approx. 650 x 300 x 600 mm, right side * 15-pin power connector * LED tail lights * Removable LED rotating beacon incl. bracket and installation * 2 x LED reversing lights at vehicle rear (activated via reverse gear) * Flashing LED side marker lights * 60 mm larch/douglas fir wooden floor * 400 mm steel front wall slotted in * Perforated outer frame approx. 45° angled with provisions for mounting 3 t folding lashing rings * In each corner: 1 x 10 t lashing ring, plus 2 x 10 t and 3 x 6.3 t lashing rings on each side * Various holes for 1.2 t lashing points in front and rear crossmembers * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm, mechanically adjustable sideways * 4-circuit hydraulic control block for potential retrofit of hydraulic ramp shifting * Chassis, drawbar, front wall, mechanical rear supports, and loading ramps hot-dip galvanized * Axles, air tanks, flange drawbar eye, and front landing gear painted in black * Hydraulic flow divider in the trailer (for hydraulic pump output in truck from over 40 l/min up to 120 l/min) * New vehicle with manufacturer warranty * Subject to error and prior sale * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 20.500 kg, skupna masa: 27.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TR 27.0 Flatbed: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lift and lower system featuring RTR function * 1st axle liftable * Rear axle as trailing steering axle with electro-pneumatic steering lock via reverse gear PIN (trailing axle lock for maneuvering purposes—no truck-side installation—assigned to PIN 10 in the 15-pin connector, for shunting purposes only, not for use on public roads) * SmartBoard control box as an info tool with pressure sensors for total axle load display * Tire pressure monitoring with display option in the truck via EBS signal, no truck-side installation required * Fixed central drawbar with 50 mm flange towing eye (loaded 900 mm, mm height adjustment at head plate) * Mechanical support windlass at the front, mechanical swing supports at the rear of the chassis * Mechanically adjustable warning sign package at the front and rear * Toolboxes made of galvanized sheet steel—black powder-coated—approx. 650 x 300 x 600 mm on the right side * Hydraulic flow divider * Continuous side walls (without central stanchion) up to the access ramp * Folding rear stanchions * Steel rear wall inserted in front of the rear stanchions * 15-pin electrical connector * LED tail lights * Removable LED beacon with holder and installation * 2 x LED reversing lamps at the rear of the vehicle (controlled by reverse gear) * Flashing LED side marker lights * 60 mm larch/Douglas fir timber floor * 400 mm steel front wall plug-in * Perforated outer frame approx. 45-degree angled with provisions for 3 t folding lashing brackets * In each corner, 1 x 10 t lashing ring, plus 2 x 10 t and 3 x 6.3 t lashing rings on each side * Various holes in the front and end cross-members for 1.2 t lashing options * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm, mechanically laterally adjustable Fpsdor Dpz Aopfx Al Hjg * 4-way hydraulic control block for possible retrofit of hydraulic ramp lateral adjustment * Chassis, drawbar, front wall, mechanical rear supports, loading ramps, and tailgate hot-dip galvanized * Axles, air tanks, flange towing eye, and front support windlass painted in black tone * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck of more than 40 ltr up to 120 ltr/min) * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: rabljeno, konfiguracija osi: 3 osi, vzmetenje: parabolično listje (vzmet), velikost pnevmatike: 235-75R17.5, Leto izdelave: 2008, 4-osovinska niskopodni prikolica na prelaz. Dozvoljena ukupna masa 40.000 kg, nosivost 31.820 kg. Teretna površina cca 9.800 mm (2.400+7.400 mm) x 2.550 mm, preklopiva proširenja do 3.000 mm, signalni paket za vanstandardnu širinu, rotaciono upozoravajuće svetlo, ležište za ruku bagera, visina utovara cca 900 mm. 12 veznih ušica, 12 okova za vezivanje na spoljašnjem ramu. Hidraulične rampe cca 3.000 x 650 mm. SAF osovine, EBS, parabolično ogibljenje sa balans agregatom, gume 235-75R17.5. Sanduk za alat. Hidraulične potporne noge pozadi. Vučna ruda 50 mm. Dvokružna hidraulika, dvokružni pneumatski sistem (Duomatik), 24 V. Žuta boja. Prodaja u viđenom stanju. Dodatne informacije: Dimenzija guma: 235-75R17.5 Ogibljenje: parabolično Prazna masa: 8.180 kg Nosivost: 31.820 kg Dozvoljena ukupna masa: 40.000 kg Zemlja porekla: Nemačka Za više informacija kontaktirajte Jan-Marc Schwickert. Fpsdpfx Aleuuxg Ne Hsg

Stanje: novo, največja dovoljena obremenitev: 16.400 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T3 Profile 30.0: * EBS-E (Electronic Braking System) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11-ton BPW Eco axles * Air suspension with lift/lower system * SmartBoard as trailer infotool with pressure sensors for axle load display per axle group * Side underrun protection * Mechanically adjustable warning panels front and rear * Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, each with spray protection * Folding (hot-dip galvanized) lid for the toolbox on the bogie platform * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm (black powder-coated) mounted right side * 15-pin electrical connector * LED lighting 12/24 V * LED beacon (removable) at rear * Side marker lights with indicator function * Drawbar with 40 mm towing eye and height adjustment via traction spring and turnbuckle * Tire pressure monitoring system with display option in truck via EBS signal (no truck-side installation required) * Rubber lining on folding ramps as well as on the access slope, left and right (approx. 860 mm long) * Rubber lining on the longitudinal beams from front to rear crossmember * Hardwood floor on the running surfaces of the low-bed platform Fpsdpfx Aloq Dyvcs Hsg * Each side with 4 stake pockets, with simultaneous 2-ton lashing capacity * Load securing package consists of: 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and integrated in the outer frame—in the corners 13.4 tons, elsewhere 10 tons * 6 pairs of mechanical folding outriggers for total width of 3 meters (not possible in rear slope) * Board holder under the loading area, lengthwise * Roller stop raised in front of front crossmember with 1 x 6.4-ton lashing eye on each side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load-holding valves * Hydraulic lateral ramp shift * Hydraulic rear support (single-stage cylinder) * Hydraulic flow divider in trailer (for hydraulic pump flow in truck over 40 to max. 140 l/min) * Hydraulic control block splash-proof * Two-line hydraulics * Platform over kingpin: approx. 1,960 x 2,520 mm * Rear platform: approx. 6,500 x 2,520 mm (including 860 mm access slope) * Loaded deck height approx. 890 mm +/- 20 mm (air suspension) * Chassis, bogie, roller stop, folding width extensions & loading ramps hot-dip galvanized * Axles, turntable, drawbar, air tank, etc. painted black * Loaded height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from calendar week 20 of 2026

Stanje: novo, največja dovoljena obremenitev: 16.400 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lifting and lowering function * SmartBoard as information tool on the trailer with pressure sensors for axle load display per axle group * Side underrun protection * Manually adjustable warning sign sets at front and rear * Front axle closed plastic mudguards and rear axle straight galvanized steel skirts, each with splash guards * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm (black powder-coated), mounted right side * 15-pin electric connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * Side marker lights with indicator control * Drawbar with 40 mm towing eye and height adjustment by tension spring & turnbuckle * Tire pressure monitoring system with display option in the truck cab via EBS signal (no in-truck installation required) * Rubber covering on folding ramps as well as on drive-up slopes left and right (approx. 860 mm long) * Rubber covering on longitudinal beams from front to end crossmember * Hardwood flooring on the running surfaces of the low-bed platform * Four stake pockets per side, each with 2 t lashing capacity Fedpfxetplv Ne Al Hspg * Load securing package consists of: 5 pairs of UVV-compliant lashing rings, tilting and retractable, loadable in all directions and recessed into the outer frame - in the corners 13.4 t, otherwise 10 t * Six pairs of manual folding extensions for 3 m total width (not at rear slope) * Plank holder under the loading platform, longitudinal direction * Raised roller stop before front crossmember with one 6.4 t lashing eye per side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extended ramp tip and load-holding valves * Hydraulic lateral ramp shift * Hydraulically operated rear support (single-stage cylinder) * Hydraulic flow divider in the trailer (for hydraulic pump output in truck over 40 l/min up to max. 140 l/min) * Hydraulic control block, splash-proof * Two-line hydraulic system * Loading area above slewing ring: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm run-up slope) * Loaded loading height: approx. 890 mm +/- 20 mm (air suspension) * Chassis, turntable, roller stop, folding extensions & drive-up ramps hot-dip galvanized * Axles, slewing ring, drawbar, air tanks, etc. painted in black tone * Loaded loading height: approx. 890mm +/- 20mm * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from week 20/2026

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dolžina tovornega prostora: 85.000 mm, širina tovornega prostora: 30.000 mm, višina nakladalnega prostora: 30.000 mm, Leto izdelave: 2016, T3 Profile 30.0: Drum brakes, 3 x 10 t axles, lateral underrun protection, rear swing-down supports on the chassis frame, mechanically adjustable warning sign packages front and rear, folding lid for tool box on the bogie platform, 4 lashing eyes per side, 6 pairs of mechanical folding outriggers for a total width of 3 meters, widening planks stored in the middle of the loading area, hydraulic 2-part loading ramps, laterally adjustable, loading area over turntable: approx. 2,000 x 2,520 mm, loading height approx. 1,070 mm, rear loading area: approx. 6,500 x 2,520 / 3,000 mm, loading height approx. 910 mm (including 860 mm inclined ramp), technically possible gross vehicle weight: 30,000 kg, vehicle is hot-dip galvanized and as new. = Further information = Weights Payload: 24,000 kg GVW: 6,000 kg Maintenance, History and Condition Number of owners: 1 Fedpfsyz Ix Rjx Al Hepg Technical condition: very good Optical condition: very good More information Tyre condition front: 90% Tyre condition rear: 90% Front tyres: 235/75 R 17.5 Rear tyres: 235/75 R 17.5 Country of manufacture: DE For further information, please contact Bernd Strack.