Faymonville Stz-4U - 81T - 3 Hydr Steering Axles - 11M Lowd... nakup rabljenega (53.383)

Stanje: novo, skupna masa: 78.000 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 850 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: • Gooseneck in SNT design to optimize loading area length, approx. 3,700 mm long, rear with a bevel approx. 1,000 mm x 10° • For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading Area: • Extendable loading platform, approx. 8,800 mm long with rear bevel approx. 500 mm x 10° • A recess in the platform and rear bevel to accommodate the excavator dipper stick, approx. 3,950 x 580 x 370/450 mm Ramps: • One pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide • Hydraulically folding ramp tips • Ramps hydraulically adjustable separately approx. 235 mm outwards and approx. 215 mm inwards • Hardwood decking on the beveled part of the loading area • Ramp with hardwood decking • 20 x 30 mm square climbing strips, approx. every 200 mm on the outer frame of the ramp Axles and Tyres: • TWINAXLE-II independent wheel suspension with BPW stub axles, 1st axle steered in advance, all other axles are hydromechanically forced steered • 1st axle with electromagnetic reverse lock via reverse gear and manual activation • Technical axle load: 12,000 kg • Hydr. axle compensation, hydraulic cylinders with shut-off valves • Tyres 245/70 R 17.5 • TPMS tyre pressure monitoring system according to ECE R 141 Accessories Included: • Plug-in steel front wall, approx. 400 mm high • 4 wheel chocks with holder • Front connection bar with yellow-red air couplings • 3 kW electro-hydraulic power pack for hydraulic control, except for hydraulic winches • 1 spare wheel • 2 pairs of screw-in lashing rings • 1 pair of horizontal lashing rings in the rear area of the gooseneck • On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized • On the gooseneck: 1 plug-in ALU rear board, approx. 400 mm high, anodized • Approx. 40 mm thick hardwood decking on the gooseneck, checker plate over the king pin • 3.5" king pin • Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide • Load area locking with conically welded arresting profiles every 250 mm Iiodpfx Aksrvw U Ssaeg • Incl. pre-tensioning plate • 1 pair of lashing rings on the front cross member • 8 pairs of recessed, fold-out lashing rings in the outer frame of the platform • Extendable (galvanized) widenings approx. 230 mm per side • 1 pair of fixed open wheel recesses up to extension, approx. 700 x 410 mm, in the platform in front of the 1st axle • Wheel recesses with checker plate covering and 15 x 15 mm square climbing strips, approx. every 200 mm • 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm, in the platform between the 1st and 2nd axle • Wheel recesses with 15 x 15 mm square climbing strips and widenings in the lower section • ALU covers for the wheel recesses between 1st and 2nd axle, which can also be used as broadening planks • 1 pair of mechanical rear supports • 20 x 30 mm square climbing strips, approx. every 200 mm on the outer frame of the bevel of the loading area • Central lubrication system with 1 pump, BEKAMAX brand, standard grease as per NLGI-2 • Radio and cable remote control, with 2 indicator lights on the receiver for single wheel control • WABCO Smart Board system • The Smart Board is equipped with an odometer • 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and mounts for rotating beacon

Stanje: rabljeno, prevoženi kilometri: 567.557 km, moč: 309 kW (420,12 KM), prva registracija: 02/2015, vrsta goriva: dizel, velikost pnevmatike: 315/60R22.5, konfiguracija osi: 6x2, medosna razdalja: 3.200 mm, gorivo: dizel, zavore: zaviranje z motorjem, barva: modra, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: zrak, skupna dolžina: 6.730 mm, skupna širina: 2.520 mm, Leto izdelave: 2015, Oprema: ABS, AdBlue, centralno zaklepanje, električno upravljanje oken, greljenje sedeža, hladilnik, klimatska naprava, nadzor oprijema, parkirni grelec, tempomat, zapora diferenciala, = Dodatne možnosti in dodatna oprema = - Električno zložljiva zunanja ogledala - Daljinsko upravljanje centralnega zaklepanja - Hidravlični sistem za nagib - Usnjena notranjost - Dvigalna os - Zračna vzmet - PTO (izhodna gred) - Radio - Kolutne zavore - Zaščita pred soncem - Samostojna grelna naprava - Orodjarna omara Iodpezz N Anjfx Akaoig = Opombe = Volvo FH 420 6x2*4 320 cm medosna razdalja. Dvigalna – krmilna os. Hidravlika za žerjav. 2 x rezervoar za gorivo. Generacija 2 – V2 tahograf. Hladilnik. = Dodatne informacije = Tehnične informacije Število cilindrov: 6 Konfiguracija osi Dimenzije pnevmatik: 315/60R22.5 Zavore: Kolutne zavore Vzmetenje: Zračna vzmet Sprednja os: Krmilna; Globina profila leve pnevmatike: 50 %; Globina profila desne pnevmatike: 50 % Zadnja os 1: Dvojne pnevmatike; Globina profila leve pnevmatike (notranja): 60 %; Globina profila leve pnevmatike (zunanja): 60 %; Globina profila desne pnevmatike (notranja): 60 %; Globina profila desne pnevmatike (zunanja): 60 % Zadnja os 2: Krmilna; Globina profila leve pnevmatike: 70 %; Globina profila desne pnevmatike: 70 % Mase Lastna teža: 9.105 kg Dovoljena nosilnost: 17.395 kg Dovoljena skupna masa: 26.500 kg Notranjost Oblazinjenje: Usnje Identifikacija Številka modela: FH 420 6x2*4 / KRMILNA OS / H = Podatki o podjetju = VSE CENE SO NETO IN VELJAJO ZA IZVOZ. (Joris Versteijnen NL-DE-GB, Wouter Greutink NL-DE-GB-ES-IT). Govorimo tudi rusko. Prizadevali se bomo, da bomo navedli pravilne informacije. Vendar iz objavljenih besedil ne moremo izpeljati nobenih pravic.

Stanje: rabljeno, največja dovoljena obremenitev: 27.300 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2013, naslednji pregled (TÜV): 08/2026, dolžina tovornega prostora: 11.700 mm, širina tovornega prostora: 3.000 mm, skupna širina: 2.550 mm, skupna višina: 3.700 mm, Oprema: ABS, * V obliki labodjega vratu s predali * Sledenje z zadnjimi kolesi * Hidravlične nakladalne rampe * Nizkopodna prikolica s podaljšanjem ----* Dimenzije pnevmatik: 235/75R17,5 * Največja dovoljena masa: 42000 kg * Lastna masa: 8700 kg * Skupna dolžina: 13150 mm * Datum naslednjega tehničnega pregleda: 02.2027 Iisdpfx Asz A N Anokaeg ----Številka vozila/Vehicle: 12148----Pridržujemo si pravico do spremembe cen in razpoložljivosti.----Oglaševanje in različni napisi so bili digitalno odstranjeni.-----Z veseljem vam bomo pomagali pri vseh formalnostih, ki so povezane z nakupom vozila. Preprosto nam sporočite svoje želje in predloge, mi pa bomo poskrbeli za ostalo. Med drugim vam lahko proti doplačilu ponudimo naslednje storitve:----Prevzem vašega starega vozila * Tehnični pregled/odobritev * Celovita ureditev izvoza * Posredovanje pri financiranju * Prijava za izvozne tablice * Prevoz vozil * Registracija vozil * Reševanje in prevoz vozil ----?VAŠA VTS EKIPA

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle hydraulically steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lower function as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED flashing beacon, rear left ----General attachments: * Side underrun protection * Landing gears in the front and mechanical swing supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder mounted on the chassis, right-hand side ----Low-loader platform: * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized steel, width = 2,480 mm x height = 500 mm x length = 665 mm, with folding lid * 400 mm high aluminum sideboards (RAL 9010 pure white) on both sides of the fifth wheel platform, foldable and removable * Rear wall – 150 mm high, slotted in * Rear slope on the fifth wheel platform down to the low-bed area, approx. 700 mm long * Fifth wheel platform fitted with 50 mm wooden planks, low-bed area with 60 mm wooden planks * Tread plate above the axles Iiodjl Tnvgopfx Akasg ----Width extensions: * 8 x mechanical folding width extensions to a total width of 3 m, except in the rear slope area (extension planks available with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages front and rear ----Load securing (lashing package): * On the fifth wheel platform, 2 x 6.3 t lashing eyes each as well as 3 x 5 t lashing bars on each side in the outer frame * In the low-bed area, 2 x 13.4 t lashing rings on each side as well as 4 x 10 t lashing rings, swiveling and retractable, integrated into the outer frame * 2 x 6.4 t lashing eyes on each side and 1 lashing eye at the rear in the excavator trough * 2 x container locks directly after the kick-up section in the low-bed platform ----Excavator trough: * Excavator trough from end of last rigid axle over steering axle up to the end brace, continuous, with internal reinforcement profile, approx. L = 2,450 mm x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * The outer board of the ramp is made from 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacities in the truck from over 40 l to 120 l/min) ----Loading dimensions: * Loading area of fifth wheel platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) ----Coupling height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear swing supports, extension consoles hot-dip galvanized * Axles, landing gears, air tanks painted in black tone * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may contain equipment not included with the offered v

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with steering function and electro-pneumatic steering lock ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * Smartboard operator panel mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General attachments: * Side underrun protection * Landing legs at the front and mechanical swing supports at rear of chassis * Straight steel mudguards * Spare wheel carrier mounted under chassis, right side ----Low-loader platform: * Gooseneck platform with 45° chamfered front corners and tool box at the front made of galvanized steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high aluminum side boards (RAL 9010 pure white) foldable and removable, along the sides of the gooseneck platform * Rear panel 150 mm high, plug-in * Rear slope on the gooseneck platform leading to low-bed, approx. 700 mm long * Gooseneck platform with 50 mm wooden planks; low-bed platform with 60 mm wooden planks Isdpepk D I Aefx Akaoig * Tread plate over the axles ----Extensions: * 8 x mechanical folding extensions to a total width of 3 m (not on the rear slope, extension planks available with storage on gooseneck platform) * Mechanically adjustable warning panel sets, front and rear ----Load securing (Lashing package): * On the gooseneck platform: 2 x 6.3 t lashing rings per side and 3 x 5 t lashing bars per side on the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, swivel and lowerable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side and 1 lashing ring at the rear, in the excavator-arm recess * 2 x container locks immediately after the step in the low-bed platform ----Excavator-arm recess: * Continuous from the end of the last rigid axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access ramps: * Mechanical one-piece, hot-dip galvanized hydraulic access ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * Quadruple control block for future retrofitting of hydraulically lateral shifting ramps by customer * The outer plank on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output of 40 up to 120 liters/min in the truck) ----Loading dimensions: * Gooseneck platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach slope) ----Fifth wheel height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paint/Finish: * Chassis, access ramps, rear folding supports, and extension brackets are hot-dip galvanized * Axles, landing legs, and air reservoirs are painted in a shade of black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Sample images may show equipment not included in the offered vehicle ----Delivery time: * Available from week 38/2026

Stanje: rabljeno, prevoženi kilometri: 802.977 km, moč: 324 kW (440,52 KM), prva registracija: 04/2013, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: bež, vrsta prenosa: mehanski, emisijski razred: Euro 5, skupna širina: 2.550 mm, skupna višina: 3.700 mm, Oprema: ABS, klimatska naprava, žerjav, * Man TGS 26.440 6x4 Hydrodrive, prikolica za gradbene materiale s hidravličnim sistemom, skupaj z zadnjim žerjavom Hiab 166 ES 3 HIDUO. * EURO 5 EEV * Medosna razdalja: 4800 mm * Notranja dolžina tovornega prostora tovornjaka: 6,40 m Ijdpoy Rcxkefx Akasig * Notranja širina tovornega prostora tovornjaka: 2,48 m * Notranja višina tovornega prostora tovornjaka: 1,00 m * Notranja številka: 72 * ----Prikolica Schwarzmüller, serija T * Letnik: 04/2013

Stanje: rabljeno, lastna masa: 10.900 kg, največja dovoljena obremenitev: 27.100 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2023, vzmetenje: zrak, velikost pnevmatike: -, Leto izdelave: 2023, Oprema: ABS, ref: VO26-2220 SYLTRAILER ALI ŽELITE PRODATI? Polprikolico za transport gradbenih strojev FAYMONVILLE F-S43-1AAF? 3 osi? 2023 - SPLOŠNE INFORMACIJE Znamka / Model: Faymonville F-S43-1AAF Tip: Polprikolica za transport gradbenih strojev, znižana Letnik: 2023 Barva: Črna Števila šasije: YAFTL3002P003 - TEHNIČNE LASTNOSTI Število osi: 3 Vzmetenje: Zračno - TEŽE IN NOSILNOSTI Lastna teža: 10.900 kg Dovoljena masa: 38.000 kg (Druga dovoljena masa: 61.000 kg) - OPREMA Hidravlične nakladalne rampe Zračno vzmetenje Znižano, visokokakovostno šasije Ojačana ploščad za težke stroje Zračno zaviranje z ABS / EBS Številne vgrajene pritrdilne točke - POMEMBNE LASTNOSTI Iisdpfxszrzm To Akasg Faymonville F-S43-1AAF 2023 3 osi Zračno vzmetenje Hidravlične rampe Ojačano, visokokakovostno šasije Lastna teža: 10.900 kg Dovoljena masa: 38 T (Druga dovoljena masa: 61 T) ---- Cena: Vprašajte nas Dobavni rok (v dneh): 1 ABS Serijska številka: YAFTL3002P003

Stanje: rabljeno, Leto izdelave: 2009, obratovalne ure: 4.809 h, Oprema: pogon na vsa štiri kolesa, WhatsApp: _____ Wacker Neuson 9503 EW/SW/4X4X4/Hidravlično nastavljiv / 4800 ur ? Proizvajalec: Wacker Neuson ? Tip: 9503 WD ? Letnik: 2009 ? Delovne ure: 4809 ur ? Naprava za opozarjanje ob preobremenitvi ? Transportne dimenzije: D: 5,88 metra x Š: 1,92 metra x V: 2,88 metra ? Moč: 74,9 kW / 102 KM ? Motor: Deutz TCD 2012 ? Največji doseg: približno 6 metrov ? Globina izkopavanja: približno 3,6 metra ? Mehanski sistem za hitro menjavo priključkov ? Sistem za hitro menjavo: Lehnhoff / SW08 ? Hitri in počasni prenos ? Blokada proti kraji ? Dodatna hidravlika ? Štirikolesni pogon 4x4x4 ? Plužna plošča ? Skupna teža: 10500 kg ? Nemški stroji ? 1. lastnik ? Takoj pripravljen za uporabo Iisdpfxozdw Sij Akajg _____ Opis lahko dobite tudi v drugem jeziku po e-pošti. ? Naše storitve: ? ? - Priprava dokumentacije za izvoz, carinska prijava, začasne registrske tablice (rumene in rdeče). ? - Nakup vaših rabljenih gradbenih strojev ali gospodarskih vozil. ? - Pomagamo vam pri financiranju. ? - Ponujamo rešitve za transport. ? - Ogled in predstavitev strojev od ponedeljka do petka med 9.00 in 17.00 (ob sobotah le po dogovoru). ? ? Naša ponudba strojev se nenehno spreminja in je vedno posodobljena na naši spletni strani. ? ? ? Z veseljem vam bomo pomagali tudi po telefonu. ? ? Sanisa GmbH ? Otto Hahn Straße 13 ? 35510 Butzbach ? ? Tel: ? Mobil: ? Ta ponudba ni zavezujoča. - Pridržana pravica do spremembe. - Nepravilnosti in/ali tipkarske napake so možne. - Prodaja v skladu z našimi splošnimi pogoji poslovanja (AGB).

Stanje: rabljeno, največja dovoljena obremenitev: 31.300 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2019, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.050 mm, skupna širina: 2.550 mm, Oprema: ABS, Meusburger MPG-3 – Nizkotilni priklopnik, krmiljena/dvigljiva os, hidravlična rampa Oprema: zračna vzmetenje * Težna os * 1. os – dvigljiva Iodpfx Ajwfwd Dekaeig * 3. os – krmiljena * Hidravlična rampa z dodatno oporo in radijsko upravljalnikom * Rampa za prevoz vozil * Električni vitel z radijskim upravljalnikom * Edscha ponjava * Predali na obeh straneh * Rezervno kolo, primerno za vožnjo * Dodatne luči * Izvlečne table za nadstandardno širino Varnost: ABS * EBS * Kolutne zavore Pridržujemo si pravico do sprememb in napak. Interna številka vozila: 8303

Stanje: novo, največja dovoljena obremenitev: 90.700 kg, skupna masa: 126.000 kg, konfiguracija osi: > 3 osi, skupna širina: 2.850 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: Hydraulically lift/lower and detachable gooseneck. Length approx. 3,650 mm. Suitable for tractor units: 6x4 or 8x4 3-axle compact front bogie: * Hook mounts at front and rear. Length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Isdpfew Tgp Dox Akasig Lowbed: * ATX-A lowbed with telescopic longitudinal beams in low-profile design, fixed hardwood floor approx. 50 mm thick * With drive-over bridge hooks at the front and bolt-lug coupling at the rear * Base width: approx. 2,850 mm, length: approx. 7,150 mm, beam height: approx. 330 mm, beam width: approx. 750 mm * Loading height approx. 480 mm, ground clearance approx. 150 mm 5-axle rear bogie: * Mechanical bolt-lug coupling for attaching a lowbed at the front; rear end traverse * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * Pendulum axle 3-axle front bogie: * PENDULUM AXLES, all axles hydro-mechanically forced-steered * Hose rupture valve on axle leveling cylinder with automatic RESET function * Hydraulic cylinders with shutoff taps and locking pins for securing in raised position * Final painting of axles with 2 coats of single color 2K paint, painted in MB7350 Novagrau * Rated axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Tires for front bogie: 12 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J 5-axle rear bogie: * PENDULUM AXLES, all axles hydro-mechanically forced-steered * Hose rupture valve on axle leveling cylinder with automatic RESET function * Hydraulic cylinders with shutoff taps and locking pins for securing in raised position * Final painting of axles with 2 coats of single color 2K paint, painted in MB7350 Novagrau * Rated axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Tires for rear bogie: 20 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimum corrosion protection * Final painting with 2 coats of 2K topcoat, single color in RAL 3002 Carmine Red, according to RAL-System 841GL Including accessories: * Steel front wall, approx. 400 mm high * Plug-in aluminum side and rear boards on gooseneck, approx. 400 mm high, anodized * 3.5" kingpin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connections on gooseneck * Front bogie with separate air connection for air impact wrench * BEKA-MAX central lubrication for one 3-axle bogie * Preparation for bolt-on container positioning for 1 x 20' or 1 x 30' on the outer beams * Without container locks * Brackets on the outer beams for installing foldable extensions * One 7-pin socket left and right, front and rear on rear bogie for warning panels * BEKA-MAX central lubrication for one 5-axle bogie * On the rear bogie, socket for cable remote control for steering * Rear bogie with trough * 2 LED reversing lights mounted on rear panel * European reflector boards (red-yellow) on the rear * One mudflap at rear * One LED beacon with bracket left and right on rear cross-member * Two INOX toolboxes 855 x 340 x 390 mm on gooseneck, left and right * 1-circuit...

Stanje: rabljeno, največja dovoljena obremenitev: 32.000 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2022, Leto izdelave: 2022, Oprema: ABS, * Faymoville F-S43-1AAF * dvižna platforma * krmilna os * vitel * platišča Alcoa * pnevmatike, približno 80 % preostale življenjske dobe Iiodpfx Aksznqqgeaog * leto proizvodnje 2022 * odlično stanje * delovni čas od ponedeljka do petka: 07:30–12:00, 13:00–18:00, ob sobotah: 07:30–17:00. * E-pošta: * Tel/WhatsApp/Viber: Aleksander Ilić * Tel/WhatsApp/Viber (angleško): Mladen Ilić

Stanje: rabljeno, prevoženi kilometri: 111 km, moč: 110 kW (149,56 KM), prva registracija: 08/2026, vrsta goriva: dizel, skupna masa: 3.500 kg, barva: bela, vrsta prenosa: mehanski, število sedežev: 3, dolžina tovornega prostora: 3.280 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 400 mm, Oprema: ABS, centralno zaklepanje, filter saj, klimatska naprava, * SCATTOLINI elektrohidravlični tristranski kiper * Dimenzije cca. 3280 x 2100 x 400 mm * Skupna masa 3500 kg * Nosilnost 802 kg * Avtomatska klimatska naprava * Diferencialna zapora na zadnji osi * Dvojni DIN radio s prostoročnim telefoniranjem * Kljuka za prikolico z kroglasto glavo * Dovoljena priklopna masa 3500 kg * Medosna razdalja 2500 mm * Dostava možna znotraj Nemčije Iisdsxfyr Uepfx Akaeg * Po dogovoru pripravimo tudi ponudbo financiranja – tudi z daljšo dobo odplačevanja! * Vaša neposredna kontaktna oseba je g. Willi Schmidt

Stanje: rabljeno, lastna masa: 15.000 kg, največja dovoljena obremenitev: 39.895 kg, skupna masa: 54.895 kg, konfiguracija osi: 3 osi, prva registracija: 10/1989, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.750 mm, višina nakladalnega prostora: 650 mm, skupna dolžina: 14.850 mm, skupna širina: 2.750 mm, skupna višina: 3.500 mm, vzmetenje: zrak, velikost pnevmatike: 8.25R15, barva: rdeča, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Vehicle location: Bovenden. 3 axles, BPW axles, air suspension, forced steering, lifting and lowering function, lashing rings, 2-part drive-on ramps, hydraulic ramps. Superstructure: hydraulically liftable low bed, hydraulic ramps. In 2009, the trailer underwent a partial overhaul for EUR 11,000: NEW FLOOR and much more, and has not been in operation since. Expandable width from 2750 mm to 3250 mm. Loading length in the low bed: 5850 mm, loading length over the axles: 4250 mm. Loading height over gooseneck approx. 1620 mm, over loading area approx. 650 mm, over the axles approx. 940 mm. 1/3 of the low bed is hydraulically liftable! ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to changes, prior sale, and errors. Iodpji Rqi Ssfx Akaeig

Stanje: rabljeno, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 10/2005, skupna širina: 2.530 mm, vzmetenje: zrak, Leto izdelave: 2005, Oprema: ABS, = Dodatne možnosti in oprema = - Zračno vzmetenje - Centralno mazanje = Dodatne informacije = Konfiguracija osi Vzmetenje: zračno vzmetenje Zadnja os 1: Maks. osna obremenitev: 9.000 kg Zadnja os 2: Maks. osna obremenitev: 9.000 kg Zadnja os 3: Maks. osna obremenitev: 9.000 kg Teže Lastna teža: 9.500 kg Iijdew S Dnhopfx Akaog Nosilnost: 32.500 kg Dovoljena skupna masa: 42.000 kg Funkcionalno Izvlečna nadgradnja: Da Finančne informacije Cena: po dogovoru Dodatne informacije Za več informacij se obrnite na Davida F Middelmana.

Stanje: novo, največja dovoljena obremenitev: 28.640 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.600 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 25 m³, Leto izdelave: 2026, Oprema: ABS, Zavora: * Wabco EBS-E / ABS (elektronski zavorni sistem z RSS) * Siliščno odklepanje za vzmetne cilindre * Kolutne zavore 22,5" * Zavorni sistem za finišer s skrajšanimi zadnjimi blatniki in ročnim stikalom za finišer ----Os: * 3 x 9 t BPW ali SAF osi (odvisno od razpoložljivosti) * Dvižna os z zagonsko pomočjo ----Vzmetenje: * Zračno vzmetenje z avtomatskim spuščanjem med postopkom kipanja (za povečanje stabilnosti, možno izklopiti za stroje za polaganje asfalta) ----Elektrika / razsvetljava: * Sistem za nadzor tlaka v pnevmatikah (TPMS) * 1 x 15-polna vtičnica za prikolice * 5-komorni zadnji žarometi s zaščitno streho * 1 x dodatni LED delovni žaromet * utripajoče stranske označevalne luči ----Splošni dodatki: * Aluminijasti zračni rezervoar * Jost teleskopske jeklene podporne noge s ploščato nogo (mogoče odklopiti le v praznem stanju) * 4 m aluminijaste lestve, nameščene desno ob strani nad blatniki * zaprti plastični posamezni blatniki * preklopna zaščita proti podletu * vlečna kljuka zadaj * pregibna lestev za vzpon spredaj levo ob strani * škatla za dokumente na prednji steni ----Okvir: * Šasija iz visoko trdnega finezrnatega jekla s prečkami, tipičnimi za Meiller ----Kiparska nadgradnja: * Polkrožna jeklena zadnja kiper korita * Prednja stena s 600 mm streho kot nosilec ponjave * Stranske stene z robustnim neprekinjenim zgornjim robom, nagnjenim navznoter * Prednja in zadnja stena poševni ----Debelina dna, stranskih sten, prednje in zadnje stene: * Prednja stena 4 mm iz jekla BS 70 * Zadnja loputa 4 mm iz jekla HBW 400 * Stranske stene iz 4 mm jekla HBW 450 * Prilagojeno dno iz 5/6 mm Hardox jekla 450 ----Hidravlični cilinder: * Sprednji hidravlični cilinder z zmernim delovnim tlakom ----Hidravlična zadnja stena: * Ležeča hidravlična in nihajoča zadnja stena. Upravljanje hidravlične zadnje stene prek mehanskega krogelnega ventilskega bloka ----Ponjave: * električna drsna ponjava - RAL 9006 bela aluminij - s stikalom na šasiji in daljinskim upravljalnikom ----Nakladalna prostornina: * cca. 25 m³ ----Višina sedla: * prazno cca. 1.247 mm * naloženo cca. 1.217 mm ----Barva: * Barvanje šasije v RAL 7021 črno sivi Iiedpjxxf Twefx Akasg * Kiper nadgradnja v RAL 9006 belo aluminij ----Splošne informacije: * --Tehnično dovoljena skupna masa je 39.000 kg-- * Možnost napake in predhodne prodaje * Novo vozilo s tovarniško garancijo ----Dobavni rok: * dobavljivo od 37. tedna / 2026

Stanje: dober (rabljeno), skupna dolžina: 6.600 mm, skupna širina: 2.750 mm, Leto izdelave: 2010, Delovanje s pomočjo hidravlike na tovornjaku Pripravljalne naprave Hidravlično upravljan podaljšek Odstranljiv podaljšek Opozorilni znaki za presežno širino Zadnji odbijač z osvetlitvijo Kraljevi člen 2,0 palca Centralni sistem za mazanje Talne plošče 4 x nosilci za razširitev Orodjarna na podaljšku Skupna dolžina: 15.708 mm – 26.008 mm Dolžina nakladalne površine: 6.600 mm Podaljšek: 4.300 mm Nosilec za podaljšek: 6.000 mm Maksimalna dolžina nakladalne površine: 16.900 mm Širina nakladalne površine: 2.750 mm Višina nosilca: 380 mm Višina kraljevega člena: 1.295 mm / 1.385 mm = Dodatne informacije = Iedpfx Akjzxn Nbjaoig Letnik izdelave: 2010 Lastna teža: 17.000 kg Nosilnost: 40.600 kg Največja dovoljena masa: 57.600 kg Tehnično stanje: dobro Vizualno stanje: dobro Proizvajalec: Goldhofer

Stanje: rabljeno, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2017, * SAF osi * Kolesni izrezi * Hidravlične nakladalne rampe, nastavljive po širini * Zračno vzmetenje * Možnost razširitve * Lastna teža: 11.020 kg ----Interna številka vozila: 11010----Napake in vmesna prodaja pridržane. WhatsApp podpora na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite udobno preko WhatsAppa WhatsApp nemško, angleško -- WhatsApp nemško, angleško, arabsko Iedpewta Alofx Akajig

Stanje: dober (rabljeno), prevoženi kilometri: 176.991 km, moč: 235 kW (319,51 KM), prva registracija: 05/2015, vrsta goriva: dizel, velikost pnevmatike: 355/50R22.5, konfiguracija osi: 6x2, gorivo: dizel, kapaciteta rezervoarja za gorivo: 400 l, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, število prestav: 12, emisijski razred: Euro 6, vzmetenje: zrak, dolžina tovornega prostora: 7.350 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 2.150 mm, Leto izdelave: 2015, Oprema: ABS, AdBlue, EBS (Elektronski zavorni sistem), USB priključek, centralno zaklepanje, dvižna zadnja plošča, električno upravljanje oken, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, meglenke, nadzor oprijema, navigacijski sistem, parkirni grelec, računalnik na krovu, servovolan, spojka prikolice, spojler, tempomat, zapora diferenciala, = Dodatne možnosti in dodatna oprema = - Alarmni sistem - Naslon za roke - Upravljanje avdio sistema na volanu - AUX priključek - Zaslon za zunanjo temperaturo - Držalo za Becker navigacijsko napravo - Strešno okno - Zadnji spojler - Blokada diferenciala - Blokada diferenciala - Merilnik vrtljajev - Električna ogledala, ogrevana - Dodatna osvetlitev - Zračna blazina za voznika - Nastavitev višine voznikovega sedeža - Daljinsko upravljanje osrednjega zaklepanja - Omejevalnik hitrosti - Tonirana stekla - Volan, nastavljiv po višini - Nastavitev višine voznikovega sedeža - Zložljiva zunanja ogledala - LED osvetlitev - Zračni rog - Zračna vzmetitev - Multifunkcijski volan - Filter trdnih delcev - Radio/predvajalnik CD - Kamera za vzvratno vožnjo - Diskovne zavore Iiedpozz Alisfx Akajg - Nastavitev višine žarometov - Zaščita pred soncem - Avtonomna grelna naprava - Blokada motorja - Tahograf - Priklopna prikolica = Dodatne informacije = Tehnične informacije Število cilindrov: 6 Konfiguracija osi Dimenzija pnevmatik: 355/50R22.5 Znamka osi: Goodyear Zavore: Diskovne zavore Vzmetenje: Zračna vzmetitev Sprednja os: Vodena; profil pnevmatike levo: 60%; profil pnevmatike desno: 60% Zadnja os 1: Dvojna pnevmatika; profil pnevmatike levo notranji: 60%; profil pnevmatike levo zunanji: 60%; profil pnevmatike desno notranji: 60%; profil pnevmatike desno zunanji: 60% Zadnja os 2: Vodena; profil pnevmatike levo: 60%; profil pnevmatike desno: 60% Teže Lastna teža: 11.030 kg Nosilnost: 14.970 kg Največja dovoljena masa (zGG): 26.000 kg Funkcionalnost Hidravlična ploščad: Cargolift, zadnja vrata, 2000 kg Višina tovorne površine: 100 cm Stanje Tehnično stanje: dobro Optično stanje: dobro Poškodbe: brez Finančne informacije Cena: Na zahtevo = Podatki o podjetju = Nidro cars Holland se nahaja v središču države in je prava izbira za nakup avtomobila, kombija ali tovornjaka. Navedena cena je "internetna cena za takojšen odkup". Za vprašanja ali preizkusno vožnjo nas kontaktirajte: CELOTNO PONUDBO SI OGLEJTE TUKAJ: Pri nas je možen vsak dogovor! (Naša oglaševanja so pripravljena z veliko pozornosti, vendar iz njih ni mogoče izpeljati nobenih pravic).

Stanje: novo, največja dovoljena obremenitev: 37.619 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.240 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 3.570 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer K.SLS 3 / 0N ? 18/30 | Year of Manufacture: 2025 | NEW | 40-t ramps | Top equipment Location: Germany Condition: New / unused Availability: Immediate Description: For sale: brand new Kässbohrer K.SLS 3 / 0N ? 18/30 low loader, year of manufacture 2025. Perfect for transporting construction machinery, equipment, and heavy goods. Robust chassis, high-quality axles, heavy-duty ramps – ready for immediate use. --- Technical Specifications Dimensions - Total length: 13,190 mm - Platform length: 9,240 mm - Platform height: 875 mm - Overall width: 2,550 mm (extendable by +600 mm with side extensions) - Gooseneck length: 3,950 mm - Unladen weight: approx. 10,381 kg Weights - Perm. total weight at 80 km/h: 48,000 kg - Perm. total weight at 60 km/h: 52,800 kg - Total axle load: 30,000 kg - King pin load: up to 18,000 kg --- Running Gear & Axles - 3 BPW axles, air suspension, drum brakes - 1 rear trailing axle - Lift axle (load-dependent + automatic control from the cab) - Tyres: 245/70 R17.5, M+S + 3PMSF - Tire pressure monitoring R141 Iiodpfjx Efzuox Akaeg - Wabco EBS 4S/3M, ABS + RSS - Wabco Smartboard (axle load, suspension, diagnostics, etc.) --- Ramps & Loading Area - Foldable 40-t drive-on ramps - Ramp length: 2,750 mm - Ramp width: 850 mm - Hydraulic sliding system - 45-mm hardwood floor + checker plate over wheel arches --- Load Securing - Multiple lashing points, 8,000 daN and 13,400 daN - 7×2 stake pockets + plug-in stakes - Container locks for 1×20 ft - Front board 450 mm, side & rear walls made of aluminium --- Body & Chassis - High-strength S700 MC steel - Partial metallisation (Zn/Al 85/15) – superior corrosion protection - Rear angle: 10°, 500 mm - 2" king pin - Mechanical support legs at the front - 45-t rear supports --- Equipment - 2× toolboxes - Rotating beacon - LED lighting - Reverse work lights - Wheel chocks - Extensions 9×2 (up to +300 mm) - Stake box - Reflective strips on sides and rear --- Colour: RAL 3020 traffic red For further information, please feel free to contact us.

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lowering system, including RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Support legs at the front and mechanical swivel supports at the rear of the chassis * Straight pressed steel fenders * Spare wheel holder under the chassis, right side ----Low Loader Deck: * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable Iiedpfjy Ngzyex Akaeg * Rear board plug-in, 150 mm high * Rear slope on fifth wheel platform to low-bed approx. 700 mm long * Fifth wheel platform with 50 mm timber planks, low-bed deck with 60 mm timber planks * Tread plate above the axles ----Widenings: * 8 x mechanical folding extensions to a total width of 3 meters (not on rear slope; extension planks available with storage on the platform) * Mechanically adjustable warning panel sets front and rear ----Load Securing (Lashing Package): * On the fifth wheel platform: 2 x 6.3 t lashing rings on each side, plus 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side, plus 4 x 10 t lashing rings, pivotable and lowerable, recessed in the outer frame * 2 x 6.4 t lashing eyes per side, plus 1 lashing ring at the excavator arm rest * 2 x container locks directly after the neck in the low-bed platform ----Excavator Arm Rest: * Continuous excavator arm rest from end of last fixed axle over steering axle to end crossbeam, with internal reinforcements, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanical one-piece hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * Outer board on ramp made from 50 mm hardwood * Climbing strips on outer frame of ramp and on approach slope * Rubber matting on ramp and approach slope ----Hydraulics: * Hydraulic flow divider in trailer (for hydraulic pump performance in the truck between 40 l/min and 120 l/min) ----Loading Dimensions: * Fifth wheel platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Coating: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, support legs, air tanks painted in a black shade * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images may show equipment not included with the offered vehicle ----Delivery time: * available from c

Stanje: rabljeno, prevoženi kilometri: 245.000 km, moč: 265 kW (360,30 KM), prva registracija: 02/2001, vrsta goriva: dizel, konfiguracija osi: 6x4, gorivo: dizel, barva: drugo, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, emisijski razred: euro2, vzmetenje: jeklo, Leto izdelave: 2001, MAN 33.364, 2001, 6x4 z reduktorjem v pestu, popolnoma vzmeten z listnatimi vzmetmi, ročno menjalnik = Dodatne informacije = Vzmetenje: listnato vzmetenje Sprednja os: krmilna Iodpfoz A U Dkex Akaeig Zadnja os 1: dvojna guma; reduktor: zunanji planetni prenosi Zadnja os 2: dvojna guma; reduktor: zunanji planetni prenosi Cena: na zahtevo = Podatki o podjetju = Bančni podatki: Račun Rabobank: 39.33.10.655 IBAN: NL73RABO0393310655 SWIFT koda: RABONL2U - Pred izvedbo transakcije vedno preverite naše bančne podatke! - Rezervacija vozil je možna samo ob plačilu varščine. - Pridržujemo si pravico do tiskarskih in besedilnih napak pri vseh ponujenih vozilih.

Stanje: dober (rabljeno), prevoženi kilometri: 739.000 km, moč: 338 kW (459,55 KM), prva registracija: 11/2017, vrsta goriva: dizel, velikost pnevmatike: 385 65 R 22.5, konfiguracija osi: 6x2, medosna razdalja: 3.950 mm, gorivo: dizel, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo, dovoljena osna obremenitev (os 1): 8.000 kg, dovoljena osna obremenitev (os 2): 7.500 kg, dovoljena osna obremenitev (os 3): 11.500 kg, Leto izdelave: 2017, Oprema: AdBlue, Tehnične informacije Število cilindrov: 6 Iiedpezqcyxofx Akajg Prostornina motorja: 12.419 cm³ Konfiguracija osi Sprednja os: Dimenzije pnevmatik: 385 65 R 22,5; Največja obremenitev osi: 8000 kg; Globina profila pnevmatik, leva stran: 50%; Globina profila pnevmatik, desna stran: 50%; Vzmetenje: listno vzmetenje Zadnja os 1: Dvigalna os; Največja obremenitev osi: 7500 kg; Vrtljiva; Globina profila pnevmatik, leva stran: 30%; Globina profila pnevmatik, desna stran: 30% Zadnja os 2: Dvojne pnevmatike; Največja obremenitev osi: 11500 kg; Globina profila pnevmatik, leva stran, notranja: 30%; Globina profila pnevmatik, leva stran, zunanja: 30%; Globina profila pnevmatik, desna stran, notranja: 30%; Globina profila pnevmatik, desna stran, zunanja: 30% Teže Lastna teža: 8.524 kg Nosilnost: 18.476 kg Največja dovoljena masa: 27.000 kg Vzdrževanje Tehnični pregled (APK): veljaven do 03.2027 Stanje Tehnično stanje: dobro Vizualno stanje: zelo dobro Poškodbe: ni Identifikacija Registrska številka: 78-BKD-5 Varnost izdelka EU odgovorna oseba: Truck Centrum Sliedrecht RIVIERDIJK 2 C 3361AP SLIEDRECHT Dodatne informacije Za dodatne informacije se obrnite na Arjana Kamsteega ali Roba Veldhuisa.

Stanje: dober (rabljeno), konfiguracija osi: > 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, vzmetenje: zrak, velikost pnevmatike: 245/70R17,5, barva: rdeča, Leto izdelave: 2015, = Dodatne možnosti in dodatna oprema = - Zračna vzmetenje - Centralno podmazovanje = Opombe = Goldhofer STZ-VL4-51/80A. Letnik: 2015. 10 ton BPW osi. Teža: 21.500 kg. Nosilnost: 52.500 kg. Maksimalna teža: 74.000 kg. Obremenitev pete: 34.000 kg. 5 metrov raztegljiv. Hidravlično odstranljiva prikolica. Zračna vzmetenje. Aluminijaste plošče na prikolici. Centralni sistem za podmazovanje. Rezervna pnevmatika. Radijski daljinski upravljalnik. Hidravlično delovanje na NATO + hidravlično iz tovornjaka. EBS ABS ALB. Pnevmatike: 245/70R17,5 70 %. Dimenzije: Prikolica: D: 4700 mm. Š: 2500 mm. V: 1900 mm. Višina pete: 1350 mm. Talna površina: D: 8000 mm. Š: 2750 mm. V: 500 mm. Debelina tal: 350 mm. Zadnja stran prikolice: D: 5600 mm. Š: 2750 mm. V: 1030 mm. Prikolica SX-L2-34/80. Letnik: 2015. 10 ton BPW osi. Teža: 3700 kg. Maksimalna teža: 38.000 kg. Obremenitev pete: 18.000 kg. Zračna vzmetenje. Pnevmatike: 245/70R17,5 70 %. Na voljo 3 kosi! ID št.: 653. Iodpsznb D Defx Akajig Na vse oglase, ponudbe in kalkulacije družbe Heinhuis, na vsa pogodbena razmerja, ki jih sklene družba Heinhuis, in na predpogodbeno komunikacijo se uporabljajo splošni pogoji poslovanja družbe Heinhuis. S kakršnim koli odzivom potrjujete veljavnost splošnih pogojev poslovanja družbe Heinhuis in izjavljate, da ste se seznanili s temi splošnimi pogoji. Naše cene so izvozne neto cene. = Dodatne informacije = Splošne informacije Letnik: 2015 Konfiguracija osi Dimenzija pnevmatike: 245/70R17,5 Znamka osi: BPW Vzmetenje: Zračna vzmetenje Zadnja os 1: Dvojne pnevmatike; maks. obremenitev osi: 10000 kg; vodena; profil pnevmatike na notranji strani leve: 70 %; profil pnevmatike na zunanji strani leve: 70 %; profil pnevmatike na notranji strani desne: 70 %; profil pnevmatike na zunanji strani desne: 70 % Zadnja os 2: Dvojne pnevmatike; maks. obremenitev osi: 10000 kg; vodena; profil pnevmatike na notranji strani leve: 80 %; profil pnevmatike na zunanji strani leve: 80 %; profil pnevmatike na notranji strani desne: 80 %; profil pnevmatike na zunanji strani desne: 80 % Zadnja os 3: Dvojne pnevmatike; maks. obremenitev osi: 10000 kg; vodena; profil pnevmatike na notranji strani leve: 70 %; profil pnevmatike na zunanji strani leve: 70 %; profil pnevmatike na notranji strani desne: 70 %; profil pnevmatike na zunanji strani desne: 70 % Zadnja os 4: Dvojne pnevmatike; maks. obremenitev osi: 10000 kg; vodena; profil pnevmatike na notranji strani leve: 70 %; profil pnevmatike na zunanji strani leve: 70 %; profil pnevmatike na notranji strani desne: 70 %; profil pnevmatike na zunanji strani desne: 70 % Teže Lastna teža: 21.500 kg Nosilnost: 52.500 kg Dovoljena skupna masa: 73.999 kg Stanje Tehnično stanje: dobro Vizualno stanje: dobro Finančne informacije Cena: Na zahtevo = Podatki o podjetju = Za več informacij:

Stanje: novo, lastna masa: 12.300 kg, največja dovoljena obremenitev: 37.200 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system - Maximum load capacity per pair: 30,000 kg Loading area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles Axles and tires: - BPW axles and suspension, two rigid axles, one self-steering trailing axle - Air suspension with lift and lower valve - The trailing steering axle with electro-magnetic reversing lock, activated by reverse gear or manually - Tyres 235/75 R17.5 3PMSF Included accessories: - 1 spare wheel with holder - TPMS tyre pressure monitoring system according to ECE R 141 Iiodpfx Akstvfkfoaog - 2" kingpin - One galvanized steel front wall - Yellow-red air couplings on the galvanized front connection rail - 4 chocks with holder on the front wall - Rear mounting area on the gooseneck for ALU approach ramps - 3 heights of aluminium planks - Galvanized folding supports under the loading area chamfer - Height-adjustable tarpaulin body (3,960 mm) - Galvanized front wall with tensioning mechanism for sliding curtain - Height adjustable by approx. 400 mm - "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls - 3 pairs of movable stakes in the loading platform - The superstructure is hydraulically extendable at the rear to the left and right by approx. 750 mm - Sliding roof with high-swivelling portal beam - Sliding curtain with 700 mm length surplus, with tensioning straps spaced approx. 600 mm apart - Height to top of the body: approx. 3,960 mm - Driving with open sliding roof is not permitted and will damage the curtain - Cover plates to bridge the gap between ramps and loading area - Rear electro-hydraulic unit under the loading platform - On gooseneck and ramps, each side with one holder for warning signs including socket - Ramp control valves located on right-hand side of trailer - 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area - Lift axle on the front axle - Grating surface in the chamfer of the loading area C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm, mounted on the right side in the direction of travel between the axles - Painted sand layer as anti-slip protection on the chequer plates on the gooseneck and loading area - BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable cover for the pump - Four extendable warning signs (approx. 400 mm each) approx. 423 x 423 mm with position light - Axle load gauge including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, afterwards defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-refined

Stanje: novo, lastna masa: 14.350 kg, največja dovoljena obremenitev: 53.450 kg, skupna masa: 67.800 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, dvižna zadnja plošča, Gooseneck: - Gooseneck in SNT design for optimization of loading bed length, length approx. 3,700 mm - Gooseneck rear with chamfer approx. 1,000 mm x 10° - For tractor units: 6x2, 6x4, 8x4 short Loading bed: - Extendable loading bed, length approx. 8,800 mm, rear chamfer approx. 500 mm x 10° - A recess in the loading bed and the chamfered section for receiving the excavator dipper stick, approx. 3,850 x 750 x 210/290 mm Two-part steel ramps: - One pair of two-part steel ramps, length approx. 4,350 mm, width approx. 900 mm - Ramps with rubber covering - Ramps hydraulically adjustable individually approx. 235 mm outwards and approx. 215 mm inwards - 'Super Grip' 25 mm rubber flooring and approx. 5 mm steel plate as additional reinforcement on the rear chamfer of the loading bed - Square climbing bars 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: - BPW axles and suspension, 1st axle steering, all other axles hydromechanically forced-steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Tires 235/75 R 17.5 - TPMS tire monitoring system according to ECE R141 - TPMS tire sensors fitted on all wheels, including spares Surface treatment: - Complete steel structure automatically blasted with shot blasting system after welding - Second blasting with corundum for optimum coating adhesion - HRM metallization of entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for best corrosion protection - Final painting with 2 layers of 2K top coat, single colour in MB 7350 Novagrau Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic power unit for controlling hydraulic functions, with the exception of hydraulic winches - 1 spare wheel - Outer carrier on the gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings in the rear area of the gooseneck - On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized - On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized - On top of the gooseneck, approx. 40 mm thick hardwood flooring, above kingpin area with checker plate cover - 2" kingpin Isdpoya E A Njfx Akajig - Round NATO socket on front connection strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross member - 8 pairs of recessed, fold-out lashing rings in the outer frame of the loading bed - Extendable (galvanized) widenings by approx. 230 mm per side - Wheel recesses with square climbing bars, 15 x 15 mm, in front of the axles fully open up to gooseneck cross beam, approx. 700 x 410 mm - Wheel recesses with square climbing bars, 15 x 15 mm, between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU covers for wheel recesses, which can also be used as bridging elements for the extension or as widening boards - 1 pair mechanical rear supports - Radio and cable remote control - Lift axle on front axle - Square climbing bars 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board system - 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm