Faymonville 3-Achs-Beton-Innenlader-Prefamax nakup rabljenega (41.196)

Stanje: novo, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Višina nalagalne površine pribl. 940 mm, 20 pritrditvenih ušes po 6 t, 20 pritrditvenih zank po 6 t, 18 pritrdilnih lukenj, 7 središčnih odprtin za kole, 14 odprtin za kole v zunanjem okvirju, 2 para kontejnerskih zapahov, Doplačilo za sprednjo steno pribl. 1.600 mm visoko, snemljiva Cena: 1.500 €, Doplačilo za izvlečno vlečno kljuko Cena: 1.500 €, Doplačilo za 4 opozorilne table z razsvetljavo Cena: 800 €, Na voljo tudi z dolžino nakladalne površine 8.600 mm, 9.000 mm ali 10.500 mm! -- Napake pri tisku, napake in spremembe pridržane, slike so vzorčne -- Več podatkov na zahtevo! Dodpez Ndkgsfx Af Ujku

Stanje: novo, lastna masa: 12.300 kg, največja dovoljena obremenitev: 37.200 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system - Maximum load capacity per pair: 30,000 kg Loading area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles Axles and tires: - BPW axles and suspension, two rigid axles, one self-steering trailing axle - Air suspension with lift and lower valve - The trailing steering axle with electro-magnetic reversing lock, activated by reverse gear or manually - Tyres 235/75 R17.5 3PMSF Included accessories: - 1 spare wheel with holder - TPMS tyre pressure monitoring system according to ECE R 141 - 2" kingpin - One galvanized steel front wall - Yellow-red air couplings on the galvanized front connection rail - 4 chocks with holder on the front wall - Rear mounting area on the gooseneck for ALU approach ramps - 3 heights of aluminium planks - Galvanized folding supports under the loading area chamfer - Height-adjustable tarpaulin body (3,960 mm) - Galvanized front wall with tensioning mechanism for sliding curtain - Height adjustable by approx. 400 mm - "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls - 3 pairs of movable stakes in the loading platform Dodstvfkfopfx Af Ujku - The superstructure is hydraulically extendable at the rear to the left and right by approx. 750 mm - Sliding roof with high-swivelling portal beam - Sliding curtain with 700 mm length surplus, with tensioning straps spaced approx. 600 mm apart - Height to top of the body: approx. 3,960 mm - Driving with open sliding roof is not permitted and will damage the curtain - Cover plates to bridge the gap between ramps and loading area - Rear electro-hydraulic unit under the loading platform - On gooseneck and ramps, each side with one holder for warning signs including socket - Ramp control valves located on right-hand side of trailer - 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area - Lift axle on the front axle - Grating surface in the chamfer of the loading area C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm, mounted on the right side in the direction of travel between the axles - Painted sand layer as anti-slip protection on the chequer plates on the gooseneck and loading area - BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable cover for the pump - Four extendable warning signs (approx. 400 mm each) approx. 423 x 423 mm with position light - Axle load gauge including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, afterwards defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-refined

Stanje: novo, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, with axle load indicator, loading area length 9,200 mm, loading height loaded approx. 900 mm, 20 lashing rings each 10 t, 16 stake pockets in the outer frame, drive-on ramps (approx. 3,000 x 750 mm), climbing rail on the outer side at the ramps and rear slope, drive-on ramps adjustable sideways, spring lifter for one-piece ramps, 70 mm thick wooden floor, storage box with lid for lashing chains or tension belts, contour markings as required, spring-actuated parking brake, vehicle hot-dip galvanized, incl. axle load indicators, Surcharge for: Warning signs with lighting and beacon = Price: 400 ¤, Widening to 3 m = Price: 500 ¤, hydraulic one-piece ramps and hydraulic ramp adjustment = Price: 1,000 ¤, excavator arm recess = Price: 1,000 ¤, Also available with 8.20 m loading area length + widening in stock. -- Subject to typographical errors, mistakes and changes, sample pictures --, More data at: !, More Details: ! Dkedoz Nv R Tjpfx Af Uju

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 6.000 kg, največja dovoljena obremenitev: 32.000 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.790 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, barva: originalen, Leto izdelave: 2026, Prihranite pri stroških prevoza! Po želji dobavimo do tri platforme, ki so postavljene ena na drugo, da prihranimo prostor. Tako boste imeli bistveno nižje stroške prevoza. Rešitev za prevoz, prilagojena vašim potrebam Konfigurirajte svoje vozilo Fliegl glede na vaše zahteve. Prikazano vozilo je zgolj primer. Proizvodnja in oprema se izvajata individualno, glede na želje stranke. #Šasi, sedlo, tovorni avto Fino zrnata jeklena varjena konstrukcija, sedelna plošča z zamenljivim 2-palčnim kraljevskim čepom Zunanji okvir rahlo nagnjen, nova izvedba z "Load-Lock-profilom" za pritrditev varnostnih pasov 24 ton, dvostopenjska podpora, upravljanje z ene strani, z okroglim spodnjim delom in ravno priključno ploščo, s sistemom za uravnoteženje obremenitve Opomba: Prosti kot podpore oziroma prosti radij gibanja nazaj približno 1930 mm Izvlečna lestev na zadnji strani Stranski varovalnik vrat 2 klini za podložitev z nosilcem Stranski zaščitni okvir iz aluminija Zaščitni okvir iz pocinkane jeklene pločevine Četrtobločne blatnike spredaj in za osjo z zaščitnimi elementi proti brizganju v skladu z evropskimi standardi Zaščita zadnje strani 2 nosilca za rezervno kolo za 1 kolo, s kompletom za pritrditev kolesa 1 rezervno kolo, proizvajalec je enak osnovni pnevmatiki, jekleno platišče 1 plastična orodjarna škatla, š=600 / v=425 / g=460 mm, z zaklepanjem #Osi + vzmetenje Osnova BPW s kolutnimi zavorami s premerom koluta 430 mm "Osi/vzmetenje laserjsko izmerjene" - zmanjšanje obrabe pnevmatik in porabe goriva Zračno vzmetenje 1. os je avtomatska dvižna os, vključno s prisilno spuščanjem in pomočjo pri vožnji, aktivacija z "3-kratno pritiskanjem zavore" (pomoč pri vožnji je funkcionalna do preseganja obremenitve osi za 30 % in do hitrosti največ 25 km/h) #Zavorni sistem Dvodelni zračni zavorni sistem Barvno označene cevi za lažje vzdrževanje Zavorni sistem s pomnilnikom vzmetne energije 2 enostavno prepoznavni priključni vtiči spredaj, brez povezovalnega kabla EBS, elektronski zavorni sistem z vtičnico EBS spredaj, brez povezovalnega kabla Pozor: Prikolico lahko vlečejo samo vlečna vozila, ki zagotavljajo učinkovitost ABS! z ventilom za dvig in spuščanje Sistem za stabilnost vozila med vožnjo #Kolesa in pnevmatike 385/65 R22.5" jeklena platišča, tovarniška srebrna barva #Elektrika 24 voltov, večkomorne luči, stranska rumena LED-osvetlitev 2 beli pozicijski luči spredaj 2 bela/rdeča luči za označevanje strani zadaj 2 x 7-polni vtični vtič spredaj, brez povezovalnega kabla #Pod Sitotiskani plošče, debeline približno 30 mm, nameščene na 8 vzdolžnih nosilcev za visoko točkovno obremenitev, do največ 7900 kg obremenitve na osjo viličarja Na zadnjem delu jeklena/valovita pločevina, nameščena na dolžini približno 300 mm #Sprednja stena / stranski okvirji spredaj Višina 1350 mm, stranski okvirji iz jekla, robustna izvedba, naprava za sprostitev stranske ponjave na sprednji steni "Crash-Blocker", na spodnji notranji strani na višini približno 140 mm z jeklenim zaščitnim okvirjem #Država registracije / oznake Nemčija Certifikat o pregledu v skladu z evropskim standardom 2007/46 Dkjdpfszmtc Aox Af Usu 24/7 služba za podporo opcijsko pakiranje v 3-paket Certifikat proizvajalca Fliegl o trdnosti nadgradnje v skladu z EN 12642 XL, Opozorilna tabla v skladu z ECE - 70

Stanje: novo, lastna masa: 10.000 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 51.600 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Loading Platform: - Gooseneck, length approx. 4,100 mm with central beam - Extendable loading platform, length approx. 9,500 mm with rear taper approx. 350 mm x 10° and integrated hook-on bar for attaching loose ALU approach ramps - Pneumatic locking system with conical locking bolts and reinforced locking positions - Supply lines are protected inside the extendable beams and automatically adjust to the respective platform length Axles, Suspension, and Tyres: - BPW axles and suspension, all axles hydro-mechanically forced steered - Mounted on turntable - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Tyres 235/75 R17.5, twin-mounted Paintwork: - 6-coat surface treatment - Complete steel structure shot-blasted after welding - One coat of zinc-based primer, one coat of adhesion primer - Final paintwork with 2 layers of 2-component (acrylic) paint, single colour in MB 7350 Novagrau, followed by cavity sealing with special wax Dksdpfx Afsiuy Nls Usu Steel Structure: - Steel structure made from high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) - Welders certified according to DIN-EN 287-1 - Welding process MAG according to EN ISO 4063, shielding gas M21 according to EN ISO 14175 Accessories: - Steel front wall, approx. 1,600 mm high - Round NATO socket at the front connection strip - 3 kW electro-hydraulic unit for controlling hydraulic functions - 4 pairs of recessed lashing rings in the outer frame of the gooseneck - 4 pairs of stake pockets integrated into the outer frame of the gooseneck for stakes approx. 100x50 mm - 1 transverse stake pocket strip mounted in the floor of the gooseneck for stakes approx. 100x50 mm (1x rear on gooseneck) - 2'' kingpin - Mechanical landing legs with 2-speed gearbox and hand crank - JOST Module B – static test load = 50,000 kg - On the gooseneck and loading area, approx. 32 mm wooden flooring in ALU-omega profiles - One locking position on the extension, approx. every 500 mm - 10 pairs of recessed folding lashing rings in the outer frame of the loading area, folding outwards - 6 pairs of stake pockets integrated into the outer frame of the loading area for stakes approx. 100x50 mm - 2 transverse stake pocket strips mounted in the floor of the loading area for stakes approx. 100x50 mm - INOX toolbox approx. 1,250 x 500 x 550 mm - Tapered end crossmember of the vehicle, approx. 350 mm 10° - Integrated hook-on bar for loose ALU approach ramps at the rear crossmember of the vehicle - 1 pair of drop tube supports at the rear crossmember - Mudguards on all axles - Central lubrication system with 1 pump - Remote steering from front and rear operable via cable remote control with push button, including single-track monitoring of the axles - Under the gooseneck and at the rear crossmember, left and right, each with a 7-pin socket for warning panels - One 7-pin socket at the rear crossmember - Container locks "TWIST-LOCKS" in the loading area for transport of 2x 20ft and 1x 40ft containers - Radio remote control for rear steering in addition to cable remote control, with 2 indicator lights on the receiver for single-track monitoring - 2 axle load gauges + axle load diagram - 4 warning panels approx. 423 x 423 mm, extendable by approx. 400 mm - Standard HRM Metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible areas hot-coated in metallic finish using ZIN

Stanje: rabljeno, prva registracija: 08/1998, skupna dolžina: 16.000 mm, skupna širina: 2.550 mm, Leto izdelave: 1998, GOLDHOFER STZ -TL 3 -33/80 3-osna polprikolica z upognjenim (labodjim vratom) SEMI, s 3 krmiljenimi osmi, z znižljivo ploščadjo in hidravličnimi rampami PRIKOLICA JE BILA PESPESKANA IN LAKIRANA!! • ABS • 3 x BPW ECO-Plus osi z zračnim vzmetenjem • 3 x krmiljene osi • Dvižno/spustno napravo • Hidravlične, dvodelne vzponske rampe • Hidravlično znižljiva ploščad • Razširljivo na 3 m širine • Opozorilne table • NATO vtikač za električno/hidravlično črpalko Dkodpfowpknwsx Af Usu • Skupna dolžina: 16.000 mm • Lastna masa: 15.900 kg • Dovoljeno skupno maso: 48.000 kg (tehnično možno 48.000 kg) • Nosilnost: 32.100 kg • 4 x merilniki obremenitve osi • Dvojna pnevmatika: 235/75 R17,5 - Tehnični pregled in varnostni pregled: !! novo !! - Nemško vozilo! Pridržujemo si pravico do napak in vmesne prodaje!

Stanje: novo, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.500 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Višina nakladalne površine obremenjena cca 940 mm, 20 x pritrdilnih obročev po 6 t, 20 x pritrdilnih oklepajev po 6 t, 18 x pritrdilnih lukenj, 7 x žepov za stebre na sredini, 14 x žepov za stebre v zunanjem okviru, 2 para zapiral za kontejnerje, doplačilo za sprednjo steno cca 1.600 mm visoko, snemljivo Cena: 1.500 €, doplačilo za izvlečno vlečno kljuko Cena: 1.000 €, doplačilo za 4 opozorilne table z osvetlitvijo Cena: 800 €, na voljo tudi z dolžino nakladalne površine 8.600 mm, 9.000 mm ali 10.000 mm!, -- Pridržujemo si pravico do tiskarskih napak, sprememb in zamenjav, slikovni primeri --, Več podatkov na zahtevo! Dsdjz Ndldepfx Af Uoku

Stanje: novo, lastna masa: 860 kg, največja dovoljena obremenitev: 2.640 kg, skupna masa: 3.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.150 mm, širina tovornega prostora: 2.150 mm, višina nakladalnega prostora: 20 mm, barva: drugo, gradbena višina: 700 mm, delovna širina: 2.200 mm, Manufacturer: Gala BGG; Model: TADUO 85 35 3 for 2 Cars Permissible total weight: 3,500 kg, 3-axle Payload: 2,640 kg Unladen weight: 860 kg Load bed dimensions: 8,500 x 2,150 mm Tyres: 195/50 R13C Loading height: 650 mm Welded steel frame Reinforced ribbed construction, fully hot-dip galvanized Spare wheel with holder 2 parking rails made from 4 mm aluminium perforated plate (2x50cm) Ramp: 32x200cm steel Jockey wheel Dsdew Df Ibepfx Af Uoku Price includes COC papers We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, we provide a free temporary registration plate for vehicle transfer. We repair trailers from all manufacturers. Further accessories available on request. Technical modifications, changes in price, and errors excepted. No liability for mistakes or printing errors. Features: - Automatic reversing system - Rubber torsion axle - Independent wheel suspension - Box body - Jockey wheel - Marker lights - Reinforced ribbed, fully hot-dip galvanized construction - Braked - Incl. warranty - 3-axle car transporter for 2 vehicles - Welded steel frame - Spare wheel with holder - 2 parking rails made from 4 mm aluminium perforated plate (2x50cm) - Ramp: 32x200cm steel

Stanje: novo, lastna masa: 10.100 kg, največja dovoljena obremenitev: 38.900 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, Oprema: ABS, Chassis: - Sturdy welded steel frame construction with front frame cranking and flat loading platform, rear ramped section approx. 500x100 mm - Gooseneck 200 mm with beveled corners - Sloped gooseneck end approx. 500x100 mm (traction ribs on outer frame behind rear inclination) - 2 kingpin positions with replaceable 2" kingpin - Outer frame closed on the outside as perforated frame for lashing with tension belts (chains not permitted) - Reinforced frame design / point load at the center of gravity - Prepared for extendable load platform widenings - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to end of vehicle - 1 pair wheel recesses in front of axle with steel covers (covers with Körapur coating), depth approx. 400 mm, and 1 pair between 1st and 2nd axle, steel covers - Underrun protection = extended end plate - Drop-down supports at rear Ramps: - 2-piece drive-up ramps, custom design, with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting mechanism (only in connection with electrohydraulic unit) - Width approx. 800 mm - Wood topping - Incl. traction ribs on ramps - Can be secured for travel with tension belts - Operated by manual lever mounted rear right in direction of travel - Hydraulically laterally shiftable Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gears: - Mechanical 24 t landing gears, operated from one side with load equalization Djdpfjwviwkex Af Ujku Axles, Steering, and Tires: - BPW air suspension axles, each rated at 10 t axle load, airbag diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lower device, total stroke approx. 200 mm - 2nd drive position via ball valve +50 mm - 1st axle as lift axle (wired via EBS), operation fully automatic with mechanical emergency actuation via button on trailer - 3rd axle as friction steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center-fitted offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Accessories: - Plug-in side walls and rear wall on gooseneck approx. 400 mm high - Spare wheel holder - Lateral aluminum underrun protection - 4 wheel chocks - Long license plate holder in end plate - 1 detachable ECE sign at rear - 11 pairs ZK modules 10t on the sides: - 2x on the gooseneck - 9x on the load platform - Steel mudguards with clear pass - Extendable warning panels incl. 3 position lamps each, front at landing gears and rear before end plate, infinitely extendable up to loading width 4,500 mm - 4 plug-in holders for warning panels in stake pockets on loading surface - 6 pairs of lateral stake pockets for 100x50 mm stakes - 2 rows of crosswise stake pockets for 100x50 mm stakes on the gooseneck from outer frame towards main frame (1x before and 1x after kingpin positions) - 3 rows of crosswise stake pockets for 100x50 mm stakes on loading platform from outer frame towards main frame (1x in front area, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in load platform for container locks to receive 1x 20ft container - Rubber apron mounted on underrun protection - Steel shot blasting, chassis hot-dip galvanized and primed - Chassis/wheel hubs/outer frame painted in DB 7350 Nova grey

Stanje: novo, lastna masa: 6.650 kg, največja dovoljena obremenitev: 23.350 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.540 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17,5 zoll, Leto izdelave: 2026, Oprema: ABS, osrednja vrtljiva plošča, 3-AXLE LOWBED TRAILER => FULL AIR SUSPENSION (front and rear) => HOT-DIP GALVANIZED Permissible total weight: 30,000 kg Payload: approx. 23,350 kg Chassis frame hot-dip galvanized via immersion bath Air suspension SAF axle with drum brake EBS electronic braking system Tyres: 235/75R17.5 – 12 units Dksdpfxshmm N Us Af Usu Lowbed length: approx. 6,500 mm 3 pairs of 10 t lashing rings recessed in the lowbed 2 pairs of 10 t lashing rings recessed in the highbed 4 pairs of 3 t lashing points on the outer frame 3 pairs of 6 t lashing eyes on the outer frame 6 pairs of stake pockets 90 x 50 mm in the outer frame Toolbox at the front, top of the platform with hinged lid 3-metre widening package without incline, with fold-out supports Spring ramp lifter 4 x warning panels Rotating beacon Storage compartment under the loading floor 1-piece ramp approx. 3,150 x 750 mm Softwood flooring for loading area and ramps Optional extras if required: Hydraulic ramp lifter €2,690.00 + VAT => Delivery freight cost: €2.90 plus VAT per km => Prices are ex works D-86368 Gersthofen Your direct contact: Mr. Hirn, Tel. DOLL VEHICLE MANUFACTURING *Subject to prior sale and changes!* *Price valid ex D-86368 Gersthofen* *Sale to business customers only!* *Images may vary and are for general guidance only => may show/accessories subject to surcharge*

Stanje: rabljeno, največja dovoljena obremenitev: 27.050 kg, skupna masa: 33.500 kg, konfiguracija osi: 3 osi, prva registracija: 07/2001, prostornina tovornega prostora: 55 m³, Leto izdelave: 2001, Oprema: ABS, Schwarzmüller 3-axle 55m³ aluminium tipper with tarpaulin Dkedpfx Ajwm Ukqof Uju Condition: good Tyres: 30–60%

Stanje: novo, lastna masa: 6.350 kg, največja dovoljena obremenitev: 38.650 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, Loading Platform: - 2 pairs of folding external lashing rings (LC 5,000 daN) - 24 pairs of cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Landing Legs: - JOST mechanical landing legs with 2-speed gearbox, 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, air suspended, with disc brakes (430 mm), lift/lower function - Tyres: 385/65 R 22.5 Braking System: - WABCO braking system compliant with EU regulations featuring EBS-E (2S2M) Paintwork: - Premium and durable corrosion protection of the standard grit-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat in single-tone MB 7350 Novagrau - Rear section metallized and painted in RAL 9010 (pure white) - Metallic paintwork not possible Steel Construction: - Steel construction made from high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical System: - Electrical system in accordance with EU regulations - Lighting: 24 volt - ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S, and 15-pin sockets - Connection standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Djdpfx Ajiu Etkof Usku Accessories included: - Yellow-red air couplings at the galvanized front connection bar - 4 wheel chocks with holders - 2" king pin - Galvanized steel front wall approx. 1,600 mm high, EN12642-XL - White reflector tape according to EU regulations, lateral and rear red - European reflective panels (red-yellow) at the rear of the trailer - Loading platform with approx. 30 mm thick hardwood flooring, framed in omega profiles - 10 pairs of stanchion sockets for 100 x 50 mm plug-in stakes in the outer frame - 3 pairs of transverse stanchion rack strips, fitted in the loading platform, for 100 x 50 mm plug-in stakes - Bracket for 1,000 mm plug-in stakes, rear in the central beam - 1 spare wheel carrier under the loading platform on the right hand side - 1 mudflap at the rear of the trailer - Manual and description on USB stick - Bracket for beacon at the rear of the trailer - Holders for warning signs including socket at the gooseneck and left/right rear panel - 6 pairs of WADER container locks on the loading platform for 1x 20ft, 2x 20ft, or 1x 40ft container, flush with rear - 80 km/h speed stickers at the rear and both sides - Four warning signs, extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light - Load gauge for axle load determination including load diagram - HRM (High Resistance Metallisation) of the outer frame - Complete steel structure is grit blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - aluminium 15%) by hot coating

Stanje: rabljeno, največja dovoljena obremenitev: 28.290 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2016, Leto izdelave: 2016, Oprema: ABS, Kögel SN24 3-axle tautliner with lift axle Condition: very good Dodpewm Ukwefx Af Usku Tyres: 70-80%

Stanje: novo, največja dovoljena obremenitev: 29.500 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.450 mm, prostornina tovornega prostora: 25 m³, skupna širina: 2.550 mm, Vehicle is from current production - available in approx. 2 weeks Vehicle / Body: Tipping Trough Gross Weight: 35,000kg / 39,000kg Unladen Weight: 5,500kg !!! Payload: 29,500kg / 33,500kg Total Length: 8,600mm Volume: 25 cbm Further Information: - Overall height approx. 3,160mm - Internal width approx. 2,350mm - Coupling height approx. 1,200mm Chassis – Semi-Trailer Tipper: - Fine-grained steel welded construction, basic lightweight design - 1x centre support leg - Folding underrun protection - Underrun protection with "spring assistance" for easier operation - Half-shell mudguards - Integrated “mudguard holder” with a stone-repellent surface - With antispray mud flaps only on the rear axle - 2 towing hooks at the rear Axles & Suspension: - SAF disc brake axles with 430 mm disc diameter - “Axle/chassis laser measured" for reduced tyre wear and fuel consumption - Axles in off-road specification - Air suspension - Air bag pressure gauge, mounted front on curved chassis - 1st axle is an automatic lift axle, also electrically operable from the truck, including forced lowering and start-off assist, without truck installation (start-off assist is functional up to 30% axle overload and up to a max. speed of 25 km/h) Braking System: - 2-line compressed air brake system Coloured line routing for easy servicing. - Spring-actuated parking brake - 2 front foolproof coupling heads, without connecting line - 24 volt EBS, Electronic Braking System with EBS socket at the front, without connection cable - With raise & lower valve - Vehicle stability control system - Automatic tip lowering with shut-off valve Wheels and Tyres: - 6 x 385/65 R22.5" European brand, manufacturer’s choice Electrics: - 24 volt, multi-chamber LED lights, side yellow LED marker lights, number plate illumination in LED (Note: with some tractors, diagnostic errors may occur even though functions are correct) Side yellow LED lighting linked with indicator - "flashing side marker lights" - Premium LED side marker lamps, each with 20 LEDs per unit - 2 white front position LED lights included Dodjvhyf Repfx Af Ueku - 2 white/red lane control rear LED lights included - 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, no connection cables - LED working lights mounted on both sides (activated via reverse light) - 2 additional LED work lights recessed at rear Hydraulics: - High-pressure cylinder max. 250 bar, smallest stage hard chromed, with HDK screw coupling, fixed part, NW 48 mm - Hyva make - Operated hydraulically via truck PTO - Hydraulic connection with hose and vehicle plug NW = 54 mm with large wing nut Tipping Body: HARDOX steel round trough in “Stone Master Design” of highly wear-resistant HB 400/450 steel. Inclined front wall with external hydraulic cylinder mount. Interior with ladder at front wall - Greenline – conical, aerodynamic body design - Shovel and broom holder on exterior front wall - "Membrane" tailgate - Tailgate as pendulum flap with "double-joint hinge", externally mounted with dual hook lock. 2 clamping bolts with toggle locks at the bottom on each side - Tailgate with rubber seal Note: Heat-resistant up to max. 170°C! - Continuous sidewalls 4 mm thick, floor 4/5 mm thick, wear- and weight-optimised structure - Fliegl S.T.E.P. – swivelling platform at front with folding ladder for side access LH side,

Stanje: rabljeno, skupna masa: 50.100 kg, konfiguracija osi: 3 osi, prva registracija: 01/2020, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.500 mm, skupna širina: 2.540 mm, skupna višina: 3.380 mm, Oprema: ABS, Števila vozila: YAMT23XX3K0104336 TELESKOPSKO podaljšanje do 7.300 mm KONTEJNERSKE ŽEPI WADER za 1 x 20", 2 x 20", 1 x 40", s podaljškom za 45-palčni kontejner DE HU 01.2027 - SP 07.2026 SAF osi s bobnastimi zavorami 3 x osi s prisilnim krmiljenjem, hidravlično-mehanski sistem z upravljanjem s kablom + daljinsko upravljanje Mere platforme: 13.500 mm (od tega 500 mm poševno) - višina nakladalne površine: 1.100 mm Pritrdilna palica za dostopne rampe (BREZ ramp) Višina sedla: 950 - 1.050 mm Polmer obračanja nazaj: 2.100 mm Žepi za vzdolžnike v podvoju, vključno z vzdolžniki (celovitost ni zagotovljena) NATO vtičnica - elektro-hidravlična agregat Stranska osvetlitev za širitev Orodjarna Centralni sistem za mazanje Pnevmatike: 235/75 R 17,5 Nosilec za rezervno kolo SREDI rezervno kolo Dkedpfx Aozmbv Rjf Uou Pridržujemo si pravico do sprememb, medprodaje in napak. Opis služi splošni identifikaciji vozila in ne predstavlja garancije v smislu pogodbene prodaje. Odločilna je opis v pogodbi o prodaji. Naša ponudba običajno ne vključuje novega tehničnega pregleda. Če je nov tehnični pregled zaželen, vam bomo z veseljem pripravili ponudbo naših pogodbenih servisnih delavnic! Vozilo je lahko opremljeno z reklamnimi nalepkami in/ali oznakami. Veljajo naši splošni pogoji dobave in plačila.

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2021, naslednji pregled (TÜV): 12/2026, skupna dolžina: 10.020 mm, skupna širina: 2.550 mm, skupna višina: 3.500 mm, Oprema: ABS, Teže * Dovoljena skupna teža: 36.000 kg * Dovoljena osna obremenitev: 24.000 kg (tehnično 27.000 kg) * Obremenitev sedelne prikolice: 12.000 kg * Prazna teža: približno 8.560 kg Dimenzije * Višina sedelne prikolice: približno 1.150 mm * Skupna širina: približno 2.550 mm * Skupna dolžina: približno 10.000 mm * Višina valja, naprava: približno 1.350 mm Splošno * Naša vozila so zasnovana in izdelana za najvišje zahteve v transportu, odlaganju/na odlagališču in v kmetijstvu. Z dolgoletnimi izkušnjami vam zagotavljamo robustno vozilo z dolgo življenjsko dobo. Jekleni okvir * Ojačan okvir, varjena jeklena konstrukcija iz vzdolžnih in prečnih nosilcev, izdelana iz visokokakovostnega jekla. * Z nosilcem za pritrditev nadstavka za odlaganje tovora. * 2-palčni kraljevi vijak, privit in zamenljiv, 2 položaja. * Sedelna plošča z nadstavkom (glejte spodaj). Osi/vzmetenje * Osi blagovne znamke z minimalnim vzdrževanjem, 3 x 9.000 kg, kolutne zavore. * Proizvajalec osi: SAF. * Vključno z zračnim vzmetenjem z napravo za dvig in spuščanje. * A-os kot dvižna os z dvostranskim dvigom. * Osna razdalja: 1.320 mm / 1.320 mm. Zavorna sistema * Zavorna sistema z dvema vodoma, odvisna od obremenitve, v skladu z direktivo EG 71/320 (WABCO). * Avtomatski regulator zavorne sile, odvisen od obremenitve. * EBS, elektronski zavorni sistem. * SmartBoard, vključno z informacijskim centrom. * Parkirna zavora v izvajanju s vzmetjo. * Avtomatsko spuščanje pri aktivaciji hidravličnega sistema. * Napajanje preko varnih priključkov spredaj (napajalni kabel ni vključen). Pnevmatike * 6 pnevmatik 385/65 R 22,5, blagovna znamka po izbiri proizvajalca, nameščene na aluminijastih platiščih Alcoa Durabright. Opore * 2 x 10 t dvižne opore z upravljanjem na eni strani, 2 hitrosti. Nadgradnja Nadgradnja za odlaganje tovora v izvajanju s podaljšanim roko * Tip: S25-6400 * Višina kljuke: 1.570 mm, po standardu DIN 30722 * Višina valja: približno 1.350 mm * Za dolžino posode znotraj: min. 4.750 mm do 7.000 mm * Dvigalna/nagibna moč: 25.000 kg * Nagibni kot: 51 stopinj * Podatki in dimenzije: po standardu DIN 30722 * Delovni tlak: največ 350 bar Dodatna oprema * Hidravlična notranja zapora. * Upravljanje ControllerPlus, vključno s pokrovom blokov upravljanja, vključno z zaslonom. * Brezžični daljinski upravljalnik, vključno s držalom in polnilno postajo, zaslon za hitro diagnozo. * Softstop, mehko spuščanje. * Softslide, gladko premikanje posode. * Ročno upravljanje kot rezervna možnost. * Avtomatsko spuščanje zračnega vzmetenja ob aktivaciji hidravličnega sistema (spuščanje zračnega vzmetenja na telo osi C). * Montaža na okvir šasije, podaljšana roka je nameščena med vzdolžnimi nosilci. Dodpszthhgefx Af Uoku Nadgradnja/sedelna plošča * Nadgradnja s fiksno sprednjo steno in zložljivimi stranskimi aluminijastimi stranicami, zadnja stranica je vstavljiva. * Leseno dno iz plošč, obdelanih s sitotiskom, privito in zatesnjeno. * Pritrdilne točke na zunanjem okviru za pritrditev tovora. Osvetljava * 24 Volt, v skladu s StVZO, z LED zadnjimi lučmi, nameščene čim višje, kot je tehnično mogoče. * Vključno z meglenko in lučjo za vzvratno vožnjo. * Po 2 luči za označevanje spredaj in zadaj. * Na vsaki strani 4 označevalne luči. * Priključek spredaj prek 15-polnega vtičnice po standardih DIN ISO 1185 in DIN 3731. * 2 dodatni reflektorji za vzvratno vožnjo. * 4 dodatni delovni reflektorji, vključeni prek meglenke. Dodatni deli * 2 x klini za podstavljanje s držali. * 6 kosov plastičnih blatnikov (2 x s ščitni

Stanje: rabljeno, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2017, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, skupna dolžina: 13.750 mm, skupna širina: 2.540 mm, skupna višina: 2.730 mm, Oprema: ABS, Številka vozila: YAFSR3005J0021355 Dkodpfx Ajznqg Ief Uju TELESKOPSKO PODALJŠAN do 8.200 mm NOSILCI ZA KONTEJNERJE WADER za 1 x 20", 2 x 20", 1 x 40", v izvlečni obliki za 45-palčne kontejnerje DE/HU pregled potreben SAF osi s bobnastimi zavorami 3 osi s prisilnim krmiljenjem, hidravlično-mehansko, nameščene na vrtljivo ploščo z kabelskim upravljanjem in radijskim daljinskim upravljanjem Avtomatsko centriranje Dimenzije platforme: 13.720 mm - višina nakladalne površine: 1.100 mm Višina sedelne sklopke: 950 - 1.050 mm Polmer obračanja nazaj: 2.100 mm Reže za podpore v podu, vključno s podporami (popolnost ni zagotovljena) NATO vtičnica Elektrohidravlična agregatna enota Osvetlitev za povečano širino Orodjarna Centralno mazanje Pnevmatike: 235/75 R 17,5 Nosilec za rezervno kolo SREDIŠČNO nameščeno rezervno kolo Pridržujemo si pravico do sprememb, prodaje medtem in napak. Opis služi splošni identifikaciji vozila in ne predstavlja garancije v smislu pogodbenega prava o nakupu. Odločilna je opis, določen v pogodbi o nakupu. Naša ponudba na splošno ne vključuje novega tehničnega pregleda TÜV. Če želite nov tehnični pregled TÜV, vam z veseljem pripravimo ponudbo naših partnerskih servisov! Vozilo je lahko oblepljeno in/ali označeno z oglaševanjem. Veljajo naši splošni pogoji dostave in plačila.

Stanje: rabljeno, prevoženi kilometri: 390.927 km, moč: 335 kW (455,47 KM), prva registracija: 03/2012, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 02/2027, barva: rdeča, vrsta prenosa: polavtomatski, emisijski razred: Euro 5, prostornina tovornega prostora: 9 m³, dolžina tovornega prostora: 4.800 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 850 mm, Oprema: ABS, klimatska naprava, * Zaščita pred soncem * ABS * Radio * Krmilni računalnik * Tempomat * Pomoč pri vožnji v klanec Dkjdszywp Topfx Af Ueu * Električni pomični stekli * Električno nastavljiva ogledala * Ogrevana ogledala * Osrednje zaklepanje * Strešno okno * Udoben sedež za voznika * Ogrevan sedež * Longitudinalna in prečna blokada diferenciala * AP osi * Jeklena odbijačna letva * Zračni dovod zgoraj * 2-vodni zračni priključek * Hidravlični priključek za prikolico * Zadnje steklo * Okrogla rotacijska opozorilna luč, oranžna * Zračne trobente * ASR * Zložljiva zaščita podvozja * Prijeklica * Redno servisirano po servisni knjižici * 16-stopenjski menjalnik * Vzmetenje: listno * Nosilnost: 10409 * Stalna zavora: motorna zavora ----Nadgradnja: Dautel DK 3, 3-stranska nadgradnja za nagibanje palet, jeklena sprednja stena, povečana, vzmeteno razbremenjene aluminijaste stranske stene levo in desno (nihajo in se zložijo), jeklena zadnja stena, jeklena podlaga, pritrdilne zanke, nakladalni prostor zadaj.----Težavna različica: 33.000 kg. Vozilo je redno servisirano po servisni knjižici, zadnji servis opravljen 02/25 pri 355.000 km! Prodaja samo podjetjem. PRI IZVOZU SE PLAČA SAMO NETO CENA!!!!! VSE PODATKE NAVAJAMO BREZ GARANCIJE. IZVEDBA + DODATNA OPREMA. Osnova vseh pogodb o nakupu, računov, predračunov, naročil in pogovorov o prodaji so naši splošni pogoji (glejte tudi pravno obvestilo).

Stanje: rabljeno, prevoženi kilometri: 390.927 km, moč: 335 kW (455,47 KM), prva registracija: 03/2012, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 02/2027, barva: rdeča, vrsta prenosa: polavtomatski, emisijski razred: Euro 5, prostornina tovornega prostora: 9 m³, dolžina tovornega prostora: 4.800 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 850 mm, Oprema: ABS, klimatska naprava, * Sončna zaslonka * ABS * Radio * Krmilni računalnik * Tempomat * Pomoč pri speljevanju v klanec * Električni pomik stekel * Električno nastavljiva ogledala * Ogrevana ogledala * Osrednje zaklepanje * Strešno okno * Udoben voznikov sedež * Ogrevan sedež * Longitudinalna in prečna blokada diferenciala * AP osi Dodpfjzywqkjx Af Usku * Jeklena odbijač * Zračni sesalnik na vrhu * Dvožilni zračni priključek * Hidravlični priključek za prikolico * Zadnje okno * Okrogla signalna luč, oranžna * Zračne sirene * ASR * Zložljiv spodnji zaščitni okvir * Prikolčna kljuka * Redno vzdrževano vozilo (po servisni knjižici) * 16-stopenjska prestavna škatba * Vzmetenje: listnato * Nosilnost: 10409 * Stalna zavora: motorna zavora ----Nadgradnja: Dautel DK 3, tristranska nadgradnja za prevračanje palet, dvignjena jeklena čelna stena, vzmeteno razbremenjene aluminijaste stranske stene levo + desno (nižne + zložljive), jeklena zadnja stena, jeklena podlaga, pritrdilne zanke, nakladalna plošča zadaj.----Težavna varianta 33.000 kg. Vozilo je redno vzdrževano (po servisni knjižici), zadnji servis je bil opravljen 02/2025 pri 355.000 km! Prodaja samo podjetjem. PRI IZVOZU SE PLAČA SAMO NETO CENA !!!!! VSE PODATKE PONUJAMO BREZ GARANCIJE. OPREMA + DODATNA OPREMA. Osnova vseh pogodb, računov, predračunov, naročil, prodajnih pogovorov so naši splošni pogoji (glejte tudi pravno obvestilo).

Stanje: novo, največja dovoljena obremenitev: 34.720 kg, skupna masa: 39.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.195 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, 3-Achs Sattelauflieger LOGO 10X * Stahl-Glattblech-Abdeckung über Königszapfen geschweißt * Stahl-Tränenblech-Abdeckung hinten verschweißt * Elektronische Luftfederung * 3 Einzelachsen, Fabrikat SAF, 9 t mit Scheibenbremsen * 1. Achse liftbar * Handmechanische Abstützung * Schemel: 6x ExTe D10 (Pos. 4 mit Doppeltaschen, Pos. 5 mit flachen Rungentaschen sowie mit Schnellverschluss-Keilsystem) Dkodpfx Aforymwzo Usu * Rungen: 8x ExTe D7 teleskopierbar + 4x ExTe D10 teleskopierbar * Bereifung: 385/55 R 22,5 auf Stahlfelgen * EBS Bremsanlage * LED Schlußleuchten mit integriertem Dreieckrückstrahler * 4x LED Arbeitsscheinwerfer (1.800 Lumen) * Luftkessel aus Aluminium * 3x Greiferabweiser zwischen den Schemeln * Rahmen + Schemel in RAL 9011 Graphitschwarz * Alle anbauteile nach EG-Vorschrift Abbildungen können vom Original abweichen. Angaben ohne Gewähr. Kontakt: Niclas Lott Tel.:

Stanje: novo, lastna masa: 8.500 kg, največja dovoljena obremenitev: 40.500 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, Oprema: ABS, Chassis: - Robust welded steel frame construction with front frame cranking and flat loading area with rear taper approx. 500x100 mm - Neck of frame 200 mm with beveled corners - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in area behind rear taper) - 2 king pin positions with replaceable 2" king pin - Outer frame closed outside as perforated outer frame for lashing with tie-down straps - Reinforced frame design / point load at center of gravity - Prepared for extendable width extensions in the loading area - With excavator trough, depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm and 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Underrun protection = extended end plate - Drop-leg supports at rear Ramps: - 2 pieces, single-part aluminium loading ramps with spring lift system - Dimensions (L x W) approx. 2,500 mm x 600 mm - Can be locked in transport position with tie-down straps - Laterally adjustable by hand Floor: - 35 mm larch wood floor with aluminium omega-profiles Landing Gear: - Mechanical 24 t landing gears with single-sided operation and load compensation Axles, Steering, and Tyres: - BPW air suspension axles, 10 t axle load each, air spring diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lift/lowering device with total travel approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired via EBS), fully automatic confirmation with mechanical emergency operation by push button on trailer - 3rd axle is friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, hub-centered - 12 tyres 245/70 R 17.5 143/141J, tubeless - Incl. tyre pressure monitoring Brake System: - Two-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Air connections yellow / red Paintwork: - Steel shot-blasting, chassis spray galvanising and priming - Chassis / wheel hub / outer frame painted in DB 7350 Novagrau - Plastic parts black, unpainted - Rims: factory silver - Reflective strips on sides and rear in yellow Accessories: - Removable side and rear walls approx. 400 mm high on gooseneck - Spare wheel bracket - Aluminium bump guard - 4 wheel chocks - Sheet metal mudguards with Clear-Pass - Long licence plate holder in end plate - 1 removable ECE board at rear - 11 pairs ZK modules 10 t at sides: - 2x on gooseneck - 9x on loading area - Without tow rings at rear - Extendable warning boards incl. 3 position lights each, front at landing gears and rear before end plate, infinitely extendable to loading width 4,500 mm - 4 mounting holders for warning boards plug-in type in stake pockets on loading area - 6 pairs of stake pockets at sides for 100x50 mm plug-in stakes - 2 rows transversely on gooseneck for 100x50 mm plug-in stakes from outer frame to main frame (1x before and 1x after king pin positions) - 3 rows transversely on loading area for 100x50 mm plug-in stakes from outer frame to main frame (1x front section, 1x before 1st axle, 1x after 3rd axle) Dodewu Agispfx Af Usku - 2 pairs of steel plates in loading area for container locks, suitable for 1x 20ft container - Rubber apron fitted on underrun protection

Stanje: rabljeno, največja dovoljena obremenitev: 31.710 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2016, naslednji pregled (TÜV): 04/2027, Oprema: ABS, Celoten seznam naših vozil, ki so na voljo takoj ali v kratkem roku, najdete na naši spletni strani. Izbor opreme. Celotna oprema na zahtevo. Podvozje v obliki klina. Povečana točkovna obremenitev približno 25.000 kg na približno 5.000 mm. Dedpfx Afey Dy Ehj Uoku 24.000 kg teleskopske oporne vitle z običajno in hitro hitrostjo. Pripetne točke za 5.000 kg, 6.000 kg in 10.000 kg. 8 žepov za pritrditev (za 2 sprednji steni). Aluminijast pas na strehi s pomično prevleko. Zadnji okvir, ki ga je mogoče razširiti na približno 3.500 mm, samo za nalaganje in razkladanje. Tri pomične letve na vsaki strani. Končne letve, ki jih je mogoče razširiti vzdolž smeri vožnje. Sprednja stena, oblikovana kot prostor za shranjevanje z vgrajenim regalnim sistemom, notranjost zaprta. DINKEL – dvižna streha, mehansko nastavljiva po višini, višina dvižne strehe 400 mm, upravljanje na obeh straneh ali na eni strani. Dodatna nastavitev višine 480 mm v korakih po 40 mm (12 x 40 mm) z nastavitvijo višine na letvah. Prikolica je vozna pod ponjavo, do skupne višine približno 4.400 mm (na zadnji strani odprta nad dvižno ploščadjo). Zgornji prečni nosilec portala s pomično prevleko, pomičen. Na vsaki strani štiri vrste zložljivih 150 mm aluminijastih letvic (na zgornjem delu samo 2 vrsti letvic), spodaj 450 mm žepi, zgoraj 4 vrste žepov, enakomerni razmik. Zračni zavorni sistem WABCO z EBS po standardu ES 71/320 EWG, vključno s sistemom PREV. Zračno vzmetenje v izvedbi ECAS, z dvigom in spuščanjem. Wabco Smart Board z indikatorjem obremenitve agregata in števci dviga. 3 x 10.000 kg osi SAF s bobnastimi zavorami. 3. os je frikcijsko vodena prikolična os. 1. os je dvigljiva. Pnevmatike 235/75 R 17,5. Dhollandia dvižna ploščad za težke obremenitve, tip DHLSU, nosilnost 9.000 kg, razdalja med točkami 1.000 mm, jeklena platforma približno 3.000 x 2.500 mm. Hidravlična dodatna opora, samodejna nastavitev na teren. Dvižna ploščad z nagibno funkcijo za nagib platforme, za uporabo kot nakladalna rampa, nosilnost do največ 13.500 kg. Barva podvozja: mb-novograu. Nadgradnja: bela. Ponavše z logotipom stranke!

Stanje: rabljeno, največja dovoljena obremenitev: 29.600 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2025, naslednji pregled (TÜV): 01/2026, Leto izdelave: 2024, Oprema: ABS, Overall length without chute: 8,801 mm Overall length with chute: 8,962 mm Internal length: 7,410 mm Overall width: 2,550 mm Internal width: 2,346 mm Internal height: 1,515 mm Track width: 2,040 mm Distance: king pin to 2nd axle: 4,800 mm Rear overhang without chute: 1,296 mm Rear overhang with chute: 1,457 mm Floor height: 1,464 mm Maximum height with tipped body: 8,272 mm Gross vehicle weight: 36,000 kg Technical gross vehicle weight: 39,000 kg Axle load: 8,000 kg Saddle load: 12,000 kg Loading volume: 26 m³ Manufacturer’s designation for homologation: NW-3 nd Unladen weight: 6,376 kg The weight is specified with an accuracy of +/- 3% nd The manufacturer reserves the right to change the vehicle’s technical data. Chassis Super Light chassis frame, straight, longitudinal beams with recessed fifth wheel plate area Welded structure, weight-optimized from high-strength S700 steel Air suspension Side guard made of aluminium profiles according to ECE 73 2 wheel chocks made of plastic Axle spacing: 1,310 mm Distance: king pin to 2nd axle: 4,800 mm Underrun protection made of steel Foldable rear underrun protection Axles and Suspension 1,200 mm coupling height unladen Number of axles: 3 Rigid axles SAF disc axles 3x9,000 kg 22.5 INTRADISC CD 1st axle liftable Landing legs SAF Hercules two-speed landing gear, full load Mudguards Full PVC mudguards - 6 pieces Rubber mudflaps with Wielton logo behind the third axle Rims 6x steel rims 22.5-11.75 ET-120 Protective caps for wheel nuts Tyres 6x tyres 385/65 R22.5, manufacturer’s choice Additional chassis equipment Aluminium ladder L=2,840 mm Shovel and broom at chassis, above the mudguard Toolbox – 44 L (mounted front left on the chassis) Water tank 30 L (mounted on the chassis centre left) Body Volume: 26 m³ Front wall inclined at 20 degrees Steel drop-down tailgate Internal height: 1,515 mm Floor: 4.5 mm, side walls: 4.5 mm Hardox Two tension latches underneath Other body equipment Control stand on chassis frame, access on front left (driver’s side) Cover Dkjdpfx Ajutz Uyef Ueu PVC roll tarp 680 g/m² with quick-release fastener and aluminium winding tube, (with vertical rear closure with extension triangle front and rear, centre tube welded into tarp) PVC roll tarp Brake system/Pneumatics Steel air tanks Spring-loaded pressure gauge Automatic lowering during tipping Wabco brake system 2S/2M Chassis paintwork Chassis painted in RAL 7021 (black grey) Body paintwork All steel parts are blasted twice prior to painting Body painted in RAL 7001 (silver grey) Tarpaulin colour Tarpaulin in RAL 9006 (white aluminium) Hydraulics HYVA hydraulic cylinder, top eye mount Hydraulic connection kit 1 Electrics Full LED lighting LED reversing spotlight - 1 pc. 2x 7-pin + 1x 15-pin with EBS connection, without connecting lines to tractor unit Full LED lighting Aspöck – ECOLED II with flashing side marker lights Additional systems Control line for lift axle from cab Parking brake System developed for semi-trailers and trailers, used for monitoring tyre pressure and temperature. Manufacturer: ABERG Connect. The system consists of TPMS sensors (tyre pressure and temperature) mounted on the rims and a device connected to the EBS. Markings Reflective warning panels Partial contour marking with Wielton logo Partial side contour marking in white Partial rear contour marking in red Wielton warning stickers Warranty 24 months on the complete product from the date of initial registration, when used in single shift operation.

Stanje: rabljeno, prva registracija: 04/2008, Leto izdelave: 2008, SCHWARZMÜLLER TAUTLINER Polpriklopnik s drsnimi ponjavami XL - certifikat Na voljo 2 kosa!! • ABS • 3 x Mercedes osi s pnevmatskim vzmetenjem • dvižna os • sistem za dviganje/spuščanje • kolutne zavore • EDSCHA streha • nosilec za rezervno kolo • lesen pod • 3 x skladiščni zaboj • Notranje mere: 13.620 x 2.500 x 2.800 mm (D x Š x V) • Lastna teža: 6.340 kg • Skupna masa: 36.000 kg (tehnično možno 39.000 kg!) • Pnevmatske gume: 385/55 R22.5 Djdpfx Afowmppus Ueku - nemški polpriklopniki! - Nov tehnični pregled! Pridržujemo si pravico do sprememb in predhodne prodaje!

Stanje: rabljeno, prevoženi kilometri: 152.139 km, moč: 368 kW (500,34 KM), prva registracija: 07/2015, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 06/2026, barva: modra, vrsta prenosa: samodejen, emisijski razred: Euro 6, prostornina tovornega prostora: 11 m³, dolžina tovornega prostora: 4.900 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.000 mm, Oprema: ABS, klimatska naprava, navigacijski sistem, parkirni grelec, žerjav, * Sun visor * Power steering * EDC (Electronic Diesel Control) * ABS (Anti-lock Braking System) * ASR (Anti-Slip Regulation / Traction Control) * Radio * Navigation system * On-board computer * Auxiliary heater / Parking heater * Cruise control * Air horns * Hill-start assist * Digital tachograph * Electric windows * Electrically adjustable mirrors * Mirror heating * Central locking * Roof hatch * Seat heating * Cool box * Longitudinal and cross locks (differential locks) * Off-road reduction gear * AP axles * Amber beacon * Top-mounted air intake * Air dryer * Alloy wheels * Tandem trailer coupling * Hydraulic connection for trailer * Folding underrun protection * Driver comfort seat / leather * 16-speed * Suspension: leaf/air * Payload: 9400 kg Dedpfsyawqxsx Af Ueku * Endurance brake: engine brake ----Special Body: Crane: Palfinger Epsilon M 120 L TR, rear-mounted, hydraulic outriggers, remote control, high-seat, 2x hydraulic extensions, oil cooler, read-off load diagram: 6.20m=1.72 t / 7.80m=1.32 t / 9.30m=1.0 t.----Body: CTM 2-way tipper, steel, with Bordmatik on left (2x stabilizers), raised front wall, excavator guard Sale to commercial customers only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL DETAILS WITHOUT GUARANTEE ESPECIALLY REGARDING EQUIPMENT AND ACCESSORIES. Our GTC (see Legal Notice) form the basis of all purchase orders, invoices, proforma invoices, orders, and sales consultations.