Müller-Mitteltal T3 Profi 30,0/Hydraulische Rampen/3-Achsen nakup rabljenega (40.301)

Stanje: novo, največja dovoljena obremenitev: 2.270 kg, skupna masa: 3.000 kg, dolžina tovornega prostora: 4.800 mm, širina tovornega prostora: 2.050 mm, Leto izdelave: 2026, ANHÄNGERWIRTZ – le marché du retrait pour votre nouvelle remorque propose des marques puissantes ! Plus de 850 remorques neuves en stock Plus de 130 remorques d’occasion en permanence en offre. Exemple sans engagement : action valable jusqu’à épuisement des stocks ! Transporteur de véhicules Martz Transporteur de voitures Carkipper 3500 585x209cm 3500kg Tridem plateau surélevé avec châssis en V à cadre surbaissé ALKO, amortisseurs de roues, pneus 10", rampes perforées conformes VDI 2700, accès direct avec plancher intermédiaire en aluminium, rampes de chargement inclinables hydrauliquement, treuil, roue jockey automatique, prise 13 pôles, et éclairage moderne... Incl. Treuil Knott Hnodpfx Aezbrk Nogpsu Incl. Châssis 100 km/h avec amortisseurs de roues Incl. Hydraulique de basculement Le nouveau transporteur de véhicules professionnel, accessible directement, à un prix attractif, prêt à être retiré après commande. Véhicule neuf, facture avec TVA, garantie du concessionnaire spécialisé depuis 35 ans 06.2026 MA-ML3OVP.350.580.200.0309KV0ED9EGK5

Stanje: novo, največja dovoljena obremenitev: 31.630 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring-loaded cylinders * Drum brakes Hnjdpfx Ajl Th Evjgpou * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with display option in the truck via EBS signal - no truck-side installation required * Warning sign packages, front and rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon at the rear * 24 V 15-pin as well as additional 12 V 7+4-pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Tool box made of powder-coated sheet steel and spare wheel holder in basket design on right side * Enclosed single plastic mudguards at the front * Straight steel mud flaps at the rear each with splash protection (spray suppression) * Side underrun protection * Extended offset cranking by 500 mm forward * Kingpin platform extension by 520 mm with 45° angled corners and 3 recessed lockable storage compartments with lid * Chassis made from high-strength fine-grained steel * Flooring over turntable platform made of 50 mm and in low-bed platform made of 60 mm softwood * Outer boards of the drive-on ramps made of 50 mm bamboo wood * Four stake pockets per side (stakes not included) with integrated 2 t lashing point * Load securing package (Lasi package) including: 2 lashing eyes (6.4 t) front left/right on the main frame of the turntable platform; on both sides, front and rear, 1 pair of 13.4 t lashing rings on the outer frame, 4 pairs per side of 10 t swivel and drop lashing rings, loadable in all directions and integrated into the outer frame; 2 pairs of 6.4 t lashing rings per side in the excavator stick tray; 8 pairs of galvanized folding extensions for total width of 3 m (not at the rear angled section) * Side extension planks stored on the left in a compartment * Excavator stick rest above rear axle up to the end of approach slope, approx. 2,300 x 740 x 190 mm * Mechanical drop supports at rear * Hydraulic, hot-dip galvanized drive-on ramps approx. 3,000 x 720 mm * Hydraulic side ramp shifting on sliding tube from ramp axle * Loading area above kingpin: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded platform height approx. 860 mm (incl. 860 mm approach slope) * Chassis, kingpin platform, drive-on ramps, mechanical folding supports at rear hot-dip galvanized * Axles, springs, air tanks, and kingpin painted in black tone * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: rabljeno, Leto izdelave: 2010, Vakuumska cisterna pribl. 6 m³, primerna za Müller-Mitteltal CHK. Vključno z vakuumsko črpalko na pogon preko kardanske gredi ter različnimi cevmi. Hnodpfx Agex Nl Npepeu Vakuumska črpalka = Dodatne informacije = Za več informacij se obrnite na Jan-Marc Schwickert.

Stanje: novo, največja dovoljena obremenitev: 11.050 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, * Müller-Mitteltal KA-TA-R 14.4 Tandem Low-loader Three-way Tipper Trailer with Ramps * NEW VEHICLE * Now immediately available in RAL 9016 Traffic White * Leasing, financing, and trade-in of your old trailer possible * Reference number for inquiries: 11654 * Remote diagnostic unit with display option in the truck via EBS signal * Side marker lights with indicator function * GVW: 14,400 kg, Payload: 11,050 kg * EBS 2S/2M * Galvanized floor, 5m x 2.42m x 0.5m, laser-welded drop sides, swinging, foldable, and removable, prepared for later retrofit of side extension panels * Lockable compartment under the tipping bridge for approach ramps * Incl. 1 pair of aluminium loading ramps, 8t per pair, 3.57m Hnodpfx Agoyvxg Iepou * Chassis hot-dip galvanized, front wall hot-dip galvanized * 4 UVV lash rings LC 5000daN at front and rear + 8 lashing eyes LC 3000daN recessed and foldable in the tipper floor (centrally positioned) * Excavator bucket rest made of hardwood * 2-step access in front of front wall (hot-dip galvanized) * Drawbar infinitely height-adjustable, hot-dip galvanized, towing eye 40mm * Wide tires 385/55R 19.5 (4 units), parabolic springs * Net hooks, rear stanchions bolted, hot-dip galvanized * Cables for the rear drop side * Plastic toolbox on the right side of the chassis frame * LED lighting system 12 + 24 Volt * 2 LED reversing lights at the rear of the trailer * Hire purchase price: * e.g. €560 for 60 months with no down payment and no residual value. Offer from our financing partner "FM LeasingPartner." Other terms with/without residual value or down payment possible * Request your personal quote! * We are official Müller-Mitteltal sales partners * Delivery free to your site available with timely order! ----Our Opening Hours Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 We are also available by appointment outside of these hours We speak German, English, Polish, and French. WhatsApp

Stanje: novo, največja dovoljena obremenitev: 8.750 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, Müller?Mitteltal KA-TA-R 11,9, tandem prikolica z nizko nosilnostjo, tristranski kipni prikolica z rampo Številka za povpraševanja: 32312, na voljo konec oktobra 2026 * NOVO VOZILO brez prve registracije * na voljo v barvi RAL 9016, prometna bela Hjdpjz H Efgofx Agpjnu * dostava je možna z doplačilom! * GVW: 11.900 kg, nosilnost 8.750 kg * dno pocinkano * 5m x 2,42m x 0,5m stranske ograje, nihajoče, zložljive in odstranljive, priprava za kasnejšo vgradnjo podaljškov stranskih ograj * sprednja stena pocinkana * zaklenjen predal pod kipno ploščo za rampo * vključno z rampama 3,31m, par 8t * orodjarna škatla iz plastike, nameščena na okvirju voznega podvozja na desni strani * 4 UVV pritrdilne točke LC 5000daN spredaj in zadaj, vgrajene in zložljive * 8 pritrdilnih točk LC 3000daN, vgrajenih in zložljivih v dno kiperja * kavlji za mrežo * vlečna palica, brezstopenjsko nastavljiva po višini, pocinkana, vlečna zanka 40 mm * okvir pocinkan * pnevmatike 235/75R 17,5, (4 kosi), osi BPW, parabolične vzmeti * nadzor tlaka v pnevmatikah * EBS * LED osvelitev za 12+24 voltov * stranske označevalne luči s funkcijo smerokazov * vijačeno, pocinkano zadnje ogrodje * nosilec za bager na sprednji steni * stopnice, dvostopenjska pred sprednjo steno (pocinkana) * ---- * Prosimo, zahtevajte ponudbo. Možna je dodatna oprema. * Financiranje že od 485 € neto za 60 mesecev brez pologa in brez končne vrednosti. Ponudba našega finančnega partnerja "FM LeasingPartner". * ---- Naše odpiralne ure Od ponedeljka do četrtka: 08:00 - 17:00 Petek: 08:00 - 15:00 Zunaj odpiralnega časa smo vam na voljo po predhodnem dogovoru. Whatsapp Možnost financiranja, lizinga in odkupa----

Stanje: rabljeno, največja dovoljena obremenitev: 12.500 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 12/1998, dolžina tovornega prostora: 8.100 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 10.440 mm, skupna širina: 2.550 mm, Dolžina tovornega prostora: skupna dolžina približno 8.100 mm / približno 6.000 mm (nizkopodna prikolica), vključno z zadnjim delom. Dodatne informacije: - vzmetne rampe - obsežen komplet pritrdilnih trakov - pritrdilne zanke na zunanjem okvirju - oddelek za shranjevanje - opozorilni znaki - žepi za nosilce - dvojna guma - vstavljive protidrsne zaščite Hnodpfoz Si A Ajx Agpeu

Stanje: novo, lastna masa: 10.350 kg, največja dovoljena obremenitev: 39.150 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Loading area: - Telescopic loading area with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom - Between the 1st and 2nd axle, 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - 3-piece detachable galvanized covers over the wheel recesses (W 670 mm) – max. point load 5 t / pc. - Recess in the chamfer and protruding into the loading area for the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of foldable external lashing rings (LC 5,000 daN) - 2 pairs of foldable external lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) One-piece aluminum ramps: - 1 pair one-piece ALU ramps, approx. 2,500 x 600 mm - Ramp with spring lifting mechanism and manually adjustable - Maximum load per pair: 24,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 trailing steering axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tool - Tyres 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R 141 Accessories included: - 1 spare wheel with holder in front of the bulkhead - 2" kingpin - 1 galvanized steel front wall approx. 400 mm high - At the galvanized coupling rail at the front, yellow-red air couplings - 4 wheel chocks with holder at the bulkhead - Mounting point at the rear of the gooseneck for ALU ramps - Galvanized extensions, extendable by approx. 230 mm per side - Galvanized folding supports under the chamfer of the loading area - 1 holder for a rotating beacon at the rear of the trailer - White reflective tape laterally, at the extension, and red at the rear, per EU regulations - At the gooseneck and rear panel, left and right, each with a holder for warning signs including socket - On the gooseneck, plug-in ALU sideboards and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the loading area for a 20ft or 30ft container - 3 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - 1 removable galvanized intermediate table with 1 pair of WADER container pockets - 20 x 20 mm square climbing strips every 200 mm on the outer frame in the chamfer of the loading area - Anti-slip sand coating on the checker plates on the gooseneck and the loading area - Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm, with position light - Holder for rotating beacon on the warning signs - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame Hjdpfx Asiu Er Aogpenu - Complete steel structure shot-blasted, then all defined visible surfaces metalized and hot-finished with ZINACOR 850 (Zinc 85% – Alu 15%)

Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 Profi ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment ----Lighting / Electrics: * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable rear LED beacon * 2 LED reversing lights (activated via reverse gear) ----General equipment: * Manometer - pressure gauge for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign sets front and rear * VA plastic quarter mudguards with spray protection * HA straight galvanized steel skirts with spray protection * Reflective contour tape on sides and rear Hnodpsl Tlhrofx Agpju * Tool box, galvanized steel sheet, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high ----Low loader platform: * Forepart in front of the turntable platform, approx. 490 mm long with 45° corners * ROBOT-welded anti-slip surface on the steel plate of the turntable platform * Hardwood floor on the running surfaces of the low loader platform ----Load securing (La-Si package comprising): * In front of the front wall support, 1 x 13.4 t UVV lashing point each left & right * 4 lateral holes each in the turntable platform with 2 t lashing capacity each * 1 pair of lashing points (13.4 t) hanging at the rear left & right in front of the rear support * 4 pairs of UVV lashing rings (10 t) on each side, swiveling and lowering, loadable in all directions and recessed in the outer frame * 3 pockets for stanchions per side, with simultaneous 2 t lashing facility ----Widening package: * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (not in the rear taper) * Plank holder for extensions under the chassis on the left, longitudinally ----Excavator arm rest: * Excavator arm rest above HA up to the end support, approx. 2,100 mm long and approx. 190 mm deep * 2 pairs of 6.4 t lashing points each side in the excavator arm rest ----Ramps: * Hydraulic one-piece approach ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer planks of ramps made from hardwood * Steel structure prepped for 6-section control valve ----Loading height: * Loading edge unladen approx. 950 mm +/- 20 mm ----Tires: * 235/75 R 17.5 tires ----Paintwork: * Chassis, turntable, folding outriggers, mechanical supports, and approach ramps hot-dip galvanized * -- Axles, air tanks, drawbar finished in a shade of black -- ----Information: * Vehicle has a day registration in 07/2024 due to missing tire pressure monitoring system, and has not been loaded/used * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egestorf

Stanje: novo, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.200 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Skupna dolžina tovorne površine pribl.: 8.200 mm, Nizkopodno pribl.: 6.000 mm dolgo, Nakladalna višina obremenjena pribl.: 890 mm, 22 x privezne ušesce po 10 t, 10 x žepe za stranice v zunanjem okviru, nakladalne rampe (pribl. 3.100 x 750 mm), plezalna letva na zunanji strani na rampi in zadnjem naklonu, nakladalne rampe nastavljive vstran, lesen pod 68 mm debel, skladiščna škatla s pokrovom za privezne verige ali napenjalne trakove, kontura označena po predpisih, opozorilna luč, vozilo vroče cinkano v potopni kopeli, vključno z indikatorji obremenitve osi, doplačila za: Opozorilne table z osvetlitvijo in opozorilno lučjo, razširitev na 3 m z lesenimi elementi, cena: 500 €, izrez za roko bagra, cena: 1.000 € neto. Napake pri tisku, spremembe in pomote so pridržane, vzorčne slike. Več podatkov na: !, Dodatne informacije: ! Hedpfx Ajz Smcaogpsnu

Stanje: rabljeno, lastna masa: 3.260 kg, največja dovoljena obremenitev: 7.240 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, prva registracija: 07/2008, dolžina tovornega prostora: 7.100 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.600 mm, skupna dolžina: 9.100 mm, skupna širina: 2.550 mm, skupna višina: 3.750 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 19,5, barva: siv, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, ABS (anti-lock braking system), air suspension, 2 axles, BPW axles, tandem, curtain-side, lashing rings, lift & lower function, through-loading system, height-adjustable towing bar Hodpfxei Rpxaj Agpsnu Body: through-loadable with front portal doors, sliding partitions, tailgate with roller tarpaulin, drum brakes ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 24,0: ----Zavore: * Wabco EBS-E (električni zavorni sistem) * Naprava za hitro sprostitev zavor za vzmetne akumulatorske cilindre * Bobnaste zavore ----Vzmetenje: * Zračno vzmetenje z ročnim spuščanjem zadnje osi ----Osi: * 3 x 11 ton Gigant osi * Srednja os, ki se lahko dvigne ----Povezava: * Pnevmatično spuščana povezava, dolžine 2.100 mm, z 40 mm vlečnim ušesom in napravo za nastavljanje višine ----Elektrika / Osvetlitev: * LED zadnje luči * 15-polni vtič * Sistem za nadzor tlaka v pnevmatikah (RDÜ) ----Splošni dodatni deli: * Orodjarna omara iz jeklene pločevine, prevlečene s prašnim premazom (Š: 1.000 mm x V: 300 mm G: 450 mm) * Škatla za shranjevanje mrež za kontejnerje iz pocinkane jeklene pločevine (Š: 960 mm x V: 300 x G: 450 mm) * Stranski zaščitni element * Plastični četrtorni blatoščitniki s ščitnikom proti brizganju * Plastični odbijač zadaj * Mehanske oporne noge zadaj ----Kontejner / Površina za nizkopodvozne prikolice: Hjdpfepk D Awox Agpenu * Vroče pocinkano glavno ogrodje z dvignjenimi zunanjimi okvirji (približno 25 mm višje) za vodenje valjastih kontejnerjev * Jeklena pločevinasta površina z vdolbinami za valje v območju podvoznega vozička * Pri transportu valjastih kontejnerjev je možna dolžina kontejnerja od 5.500 do 7.000 mm * Pnevmatska 4-točkovna zaklepna naprava ter mehanski, vstavljivi oporni koti spredaj v tirnicah * Potrdilo o ustreznosti po standardu DIN 30722 - 1 * Transport do 2 kontejnerjev z maksimalno prostornino 10 m³ * 8 vstavljivih opornih elementov za stransko centriranje kontejnerjev, sprednji 4 oporni elementi so vstavljeni s premičnim opornikom ----Varovanje tovorja: * 3 pari 10-tonskih pritrdilnih obročev (UVV) na strani za pritrditev pritrdilnih elementov za varno pritrditev kontejnerjev s trenjem in silo * Po 4 pritrdilni pasovi v obliki deteljice (na strani) in 1 par 13,4-tonskih pritrdilnih obročev (UVV) spredaj * Potrdilo o varovanju tovorja po standardih DIN EN 12195-1, DIN EN 12640, DIN EN 12642 in VDI 2700 ----Rampe: * Varjeni trak kot protidrsna prevleka v območju tirnic nagibne rampe * 1 par aluminijastih ram za nalaganje (16 ton / par), velikosti 2.800 x 400 mm, primernih za vozila s gumijastimi in goseničnimi pogoni (zaključljiv predal zadaj) ----Pnevmatike: * Pnevmatike: 235/75 R17,5 ----Višina vozila: * Višina vozila pri obremenitvi približno 1003 mm ----Nosilnost: * Nosilnost 18.900 kg ----Lakiranje: * Odsevni konturni trak na strani in zadaj * Osi, vrtilni obroč, povezava in tlačna posoda, lakirani v črni barvi * Vroče pocinkano glavno ogrodje ----Informacije: * Dovoljena skupna masa 27.000 kg je tehnično možna * Novo vozilo brez prve registracije z garancijo proizvajalca * Napake in vmesna prodaja pridržane ----Čas dostave: * Takoj na voljo iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 24,0: ----Zavore: * Wabco EBS-E (električni zavorni sistem) * Naprava za hitro sprostitev zavor pri zračnem cilindru * Bobnaste zavore ----Vzmetenje: * Zračno vzmetenje z ročnim spuščanjem zadnje osi ----Osi: * 3 x 11 ton, osi Gigant * Srednja os, ki jo je mogoče dvigniti ----Povezovalna priprava: * Pnevmatično spuščana povezovalna priprava, dolžina 2.100 mm, z 40 mm prijemalom in napravo za nastavitev višine ----Elektrika / Razsvetljava: * LED zadnje luči * 15-polni priključek za elektriko * Sistem za nadzor tlaka v pnevmatikah (TPMS) ----Splošni dodatni deli: * Orodjarna omara iz jeklene pločevine, prevlečene s prašnim premazom (Š: 1.000 mm x V: 300 mm x G: 450 mm) * Predalnik za mreže za kontejnerje iz pocinkane jeklene pločevine (Š: 960 mm x V: 300 mm x G: 450 mm) * Stranska zaščita pred trčenjem * Plastični blatniki s ščitnikom proti brizganju * Plastični odbijač na zadnji strani * Mehanske oporne nogice na zadnji strani ----Ploščad / Nižinska prikolica: * Vroče pocinkano glavno podvozje z dvignjenim zunanjim okvirjem (približno 25 mm višje) za vodilo valjastih kontejnerjev * Jeklena pločevinasta podlaga z vdolbinami za valje v podvoju * Pri transportu valjastih kontejnerjev je možna dolžina kontejnerja od 5.500 do 7.000 mm * Pnevmatična štirivojna zaklepna naprava, kot tudi mehanske, vstavljive končne opore na sprednji strani v tirnicah * Potrdilo o tovornem prostoru v skladu z DIN 30722 - 1 * Transport do 2 kontejnerjev z največjo prostornino 10 m³ * 8 vstavljivih opor za stransko centriranje kontejnerjev, sprednje 4 opore za kontejnerje so vstavljene s nihajno oporo ----Varovanje tovorja: * 3 pari 10 t, UVV pritrdilnih obročev na strani za pritrditev veznih elementov za oblikovno in silosno pritrditev kontejnerjev * Po 4 pritrdilnih pasov v obliki deteljice (na strani) in 1 par 13,4 t, UVV pritrdilnih obročev na sprednji strani * Potrdilo o varovanju tovorja v skladu z DIN EN 12195-1, DIN EN 12640, DIN EN 12642 in VDI 2700 ----Rampe: * Varjena plošča kot protizdrsna obloga na območju tirnice nakladalne rampe * 1 par aluminijastih ramp (16 t / par) 2.800 x 400 mm, primernih za vozila z gumijastimi in verižnimi pogoni (zaklenljiv prostor za shranjevanje na zadnji strani) ----Pnevmatike: * Pnevmatike: 235/75 R17,5 ----Višina vozila: Hodpfopk D Iiex Agpenu * Višina vozila pri obremenitvi približno 1003 mm ----Nosilnost: * Nosilnost 18.900 kg ----Lakiranje: * Odsevni stranski in zadnji trak * Osi, vrtilni obroč, povezovalna priprava in zračni rezervoar so lakirani v črni barvi * Vroče pocinkano glavno podvozje ----Informacije: * Tehnično je možna dovoljena skupna masa 27.000 kg * Novo vozilo brez prve registracije z garancijo proizvajalca * Napake in vmesna prodaja so pridržane ----Dobavni rok: * Na voljo takoj iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Flatbed: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lift and lower function ----Drawbar / Towing Eye: * Height-adjustable drawbar (adjustable by 300 mm) * Drawbar shortened by approx. 200 mm to about 1,800 mm (resulting in a B-dimension of approx. 8,080 mm) Hsdov D Tbdspfx Agpsnu * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (actuated via reverse gear) * 1 removable LED beacon incl. bracket at the rear * Tire Pressure Monitoring System (TPMS) ----General Attachments: * Mechanically adjustable 3 m warning panel sets front and rear * Landing leg at the front * External fold-down supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm on each side left & right * Side underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m outer container width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN-compliant) with an absolute outer width of 3,000 mm ----Load Securing: * Perforated outer frame angled at approx. 45 degrees with 2 t lashing capacity every 480 mm * Optional installation of 3 t recessed lashing rings every 600 mm – laterally, 5 x 3 t UVV-compliant lashing rings installed per side * At the front and rear corners 1 x 6.3 t lashing ring each (front directly behind the container locks in the wooden floor and rear in the end cross member) * Various holes in the front wall and end cross member for 1.2 t lashing options ----Ramps: * 1 pair aluminum slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t per pair), suitable for rubber-tyred and tracked vehicles * Rear storage compartment under the loading area, integrated into the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection, and rear support elements hot-dip galvanized--- * Axles, air tank, front landing leg, and flange towing eye painted in black ----Other information: * Brand-new vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 39/2026

Stanje: novo, lastna masa: 10.700 kg, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, barva: sivo-črna, Oprema: ABS, Gooseneck: • Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Extendable loading platform: • Loading platform in extendable design with rear taper approx. 1,000 mm x 8° • Cut-outs in outer frame of loading platform for attaching tensioning straps • Approx. 48 mm thick hardwood flooring; anti-slip checker plate covering above the axles Two-piece steel ramps: • One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering • Ramps with hydraulically foldable ramp sections, hydraulic lift system, and hydraulically adjustable • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reverse lock, activated via reverse gear or manually • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Paintwork: • First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component zinc dust primer • High-quality, single-color top coat in MB 7350 Novagrey applied with two-component paint • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: • Steel construction made of high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system in accordance with EU regulations, 24 Volt lighting • ASPÖCK-UNIBOX on front connection panel with 24N, 24S & 15-pin sockets Accessories included: • One spare wheel with holder • Galvanized steel front wall approx. 400 mm high • Yellow-red air couplings on the galvanized front connection panel • 4 wheel chocks • Rear mounting bracket for beacon light at the end of the semitrailer • Recess at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the loading platform taper • Cover plates to bridge the gap between ramps and loading platform • White reflector tape per EU regulations on sides, extension, and red at rear • Electro-hydraulic unit at rear, under the loading platform • On gooseneck and ramps, left and right, each with a holder for warning signs, including socket • Operating valves for the ramps located on the right side of the trailer • ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) • Four warning panels extendable by approx. 400 mm with a position light • 3 pairs of WADER container pockets in the loading platform for one 20ft, 30ft or 40ft container • 6 pairs of stanchion pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform taper • Painted anti-slip sand layer on checker plates, above king pin and loading platform • Load gauge for axle load measurement, including load diagram Hnedpfx Aehlz S Nsgpeu • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized and hot-finished with ZINACOR 850 (Zinc 85% - Alu 15%)

Stanje: rabljeno, lastna masa: 3.250 kg, največja dovoljena obremenitev: 10.250 kg, skupna masa: 13.500 kg, konfiguracija osi: 2 osi, prva registracija: 09/2004, dolžina tovornega prostora: 4.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, skupna dolžina: 6.500 mm, skupna širina: 2.550 mm, skupna višina: 1.900 mm, vzmetenje: jeklo, velikost pnevmatike: 385/55R19.5, barva: oranžna, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385/55R19,5 160J, velikost zadnje pnevmatike: 385/55R19,5 160J, voznikova kabina: drugo, Lokacija vozila: Bovenden, jeklena konstrukcija, listnata vzmetenje, 2 osi, osi BPW, tandem, zaščita v obliki črke U, podpora spredaj, podpora zadaj, nihajna vrata, nastavljiva vlečna prikolica Hsdeznldujpfx Agpenu Nadgradnja: 3-stranski dvižni prikolica, 2 osi BPW, bobnaste zavore! Višina nakladalne površine približno 1200 mm! PODATKI O DODATNI OPREMI SO NAVEDENI BREZ GARANCIJE, pridržane spremembe, medčasna prodaja in napake!

Stanje: novo, največja dovoljena obremenitev: 37.560 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 ton BPW axles * Start assist for shunting purposes on the first axle, activated via EBS (without truck-side installation) * Last axle is a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle for maneuvering purposes from the driver’s cab via EBS (without truck-side installation) ----Suspension: * Air suspension with lift and lowering function as well as RtR valve ----Electrics / Lighting: * Smart-Board infotool mounted on trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at rear for overlength lighting * Side marker lamps with indicator function * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection Hedpoykx Nkefx Agponu * Support legs at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Swing arm as a carrier for connecting lines from truck to semi-trailer ----Low Loader Platform: * 2nd king pin position * Gooseneck platform with 45° chamfered front corners and front-mounted toolbox made of galvanized, powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm aluminum side boards (in desired RAL color) foldable and removable along the gooseneck platform * Rear wall, insertable, height 150 mm * Rear incline on the gooseneck platform to the low-bed approx. 700 mm long with checker plate covering and at the end a perforated strip for attaching aluminum approach ramps * Gooseneck platform with 50 mm clamped wooden planks, low-bed platform with 60 mm clamped wooden planks * Tread plate over axles * 9 mechanical extension panels to a total width of 3 m, not included in the rear incline (extension planks available with closed transverse stowage compartment under load floor) * Preparation for 3 storage recesses under the gooseneck platform for optional storage of aluminum approach ramps or planks for covering wheel recesses * Preparation for container locks on the swan neck ----Load Securing (LaSi Package): Gooseneck platform: * Perforated outer frame, 45° angled, with hole pattern for lashing devices (2 t lashing capacity per point with a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings recessed into the floor per side (1 x on gooseneck platform, 1 x on longitudinal frame after the cranking, 1 x above middle axle next to longitudinal frame) Low-bed platform: * 3 x 13.4 t lashing rings per side at the outer frame (1 x start of gooseneck cranking, 1 x start of approach ramp, 1 x end of approach ramp) * 2 x 10 t lashing rings per side (1 x between front wheel recess and 1st axle, 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings per side screwed to outer frames of the wheel recesses (2 at front wheel recess, 1 at rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last rigid axle over the steering axle to the end cross member, continuous with internal reinforcing profile approx. W = 770 mm x T rear

Stanje: novo, največja dovoljena obremenitev: 37.560 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Moving-off aid for shunting, connected to the first axle via EBS (no installation required on the truck side) * Last axle as self-steering trailing axle with electro-pneumatic lock * Trailing axle lock for shunting purposes, activated from the cab via EBS (no installation required on the truck side) ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Electrics / Lighting: * Smart-Board infotool mounted on trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at rear for overlength lighting * Side marker lights with indicator circuit * Tire pressure monitoring with display in the truck via EBS signal (no installation required on the truck side) ----General Attachments: * Side underrun protection * Landing gear at front, swing supports at rear of the chassis * Straight steel fenders * Spare wheel carrier in front of front wall crossmember (spare wheel not included) * Mechanically adjustable warning sign packages at front and rear * Swing arm as carrier for connection lines from truck to trailer ----Low Loader Deck: * 2nd kingpin position * Saddled platform with 45° chamfered front corners and front toolbox made from galvanized, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high drop-down/removable aluminium sideboards (custom RAL color) on saddle platform * Removable 150 mm high rear wall * Rear inclined ramp of approx. 700 mm at the end of saddle platform to low-bed deck, fitted with checker plate and lashing bar for attaching aluminium approach ramps * Saddle platform with 50 mm tongued-and-grooved timber floor, low-bed platform with 60 mm tongued-and-grooved timber planks Hjdjykx Nqjpfx Agpenu * Tread plate above axles * 9 x mechanical folding extensions to 3 m overall width, but not on rear ramp (extension planks included with lockable transverse storage compartment under load area) * Preparation for 3 ramp storage compartments under saddle platform for either aluminium ramps or timber planks for wheel trough covers * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Saddle Platform: * Perforated external frame, angled at 45°, with hole pattern for lashing equipment (2 t lashing capacity per point, minimum spacing 480 mm) * 3 x 13.4 t recessed tie-down rings per side (1 on saddle platform, 1 on main longitudinal beams after the step, 1 above the center axle beside the beam) Low-bed Deck: * 3 x 13.4 t tie-down rings per side on outer frame (1 at the start of the gooseneck, 1 at the start of the rear ramp, 1 at the end of the ramp) * 2 x 10 t tie-down rings per side (1 between front wheel-well and 1st axle, 1 between 2nd and 3rd axle) * 3 x 5 t tie-down rings per side, bolted to the outer frame of wheel wells (2 at front, 1 at rear wheel well) ----Digger Arm Rest: * Extended digger arm rest from end of last fixed axle over steering axle to end crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D at rear

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Platform Trailer: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lifting and lowering device ----Drawbar / Flange Eye: * Drawbar height-adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (results in a B-dimension of approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reverse lights at the rear (activated by reverse gear) * 1 removable LED beacon (including bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning panel sets at front and rear * Support winch at front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm, one on each side left & right * Side underrun protection * Rear underrun protection * Plastic quarter fenders ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable for 3 m container external width) and lockable; locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN compliant) with a total external width of 3,000 mm ----Load Securing: * Perforated outer frame approx. 45° bent with 2 t lashing force every 480 mm * Installation of 3 t lashing brackets possible every 600 mm - 5 x 3 t UVV-lashing brackets mounted per side * In each front and rear corner 1 x 6.3 t lashing ring (front directly behind the container locks in the wooden floor and rear in the end crossmember) Hnjdpfx Asv D Tbkjgpju * Various drillings in front wall and end crossmember for 1.2 t lashing options ----Ramps: * 1 pair of aluminium slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tired and tracked vehicles * Storage compartment under the loading platform at the rear, integrated into the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air tanks, front support winch and flange towing eye painted in a shade of black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from CW 39/2026

Stanje: rabljeno, lastna masa: 2.910 kg, največja dovoljena obremenitev: 7.590 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, prva registracija: 09/2009, naslednji pregled (TÜV): 04/2025, dolžina tovornega prostora: 4.500 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 450 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, barva: modra, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, steel body, 2 axles, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing rings, underrun protection, front support, rear support, swinging tailgates. Body: Tandem 3-way tipper trailer with ramp recess. Loading ramps available at an extra cost from €900 net! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Hjdpfxjv S H Sfe Agpjnu

Stanje: novo, največja dovoljena obremenitev: 13.410 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 900 mm, prostornina tovornega prostora: 11 m³, Leto izdelave: 2026, * KA-TA-R 18,0 ML * Wabco EBS-E (električni zavorni sistem z RSS) * Naprava za hitro sprostitev zavor za cilindr z zračnim akumulatorjem * Bobnaste zavore * Sistem za nadzor tlaka v pnevmatikah z možnostjo prikaza na zaslonu tovornjaka prek signala EBS – brez dodatne montaže na tovornjaku * 2 x 9 ton BPW osi * Zračna vzmetenje z ohranjanjem nivoja med nagibanjem * Priključna prikolica s 50 mm prirobničnim priključkom (premikljiv za +77 mm in -33 mm s pomočjo kompenzacijske plošče) * Jost podorna opora spredaj * zložljiv pocinkani jekleni spodnji ščit za nakladanje materiala * zaprt plastični posamični blatnik * platforma na čelni steni * mehanska pokrivna ponjava * 15-polni električni vtič * LED zadnje luči s pocinkanim zaščitnim pokrovom * 2 LED luči za vzvratno vožnjo * podvozje iz fino zrnatega jekla * jeklena 3-stranska nadstavba za nagibanje (stranske stene z MM profilom – brez srednjega nosilca – nihajna konstrukcija prek ročne centralne zaklepanja, leve stranske stene pa se lahko zložijo s pomočjo vzmetne dvigalne naprave) * pokrivna ponjava v barvi, podobni RAL 7038, ahata siva, z zategovanjem ponjave s pomočjo zateznih mehanizmov na straneh in elastičnih trakov spredaj in zadaj * platforma na čelni steni iz rešetkastega jekla z stopnico za vstop na priključni prikolici in oprijemom na čelni steni * zadnja stena – iz jekla HBW 400 – nihajna konstrukcija prek avtomatske dvojne zaklepne naprave * 5 mm jeklena pločevina tal iz jekla HBW 450 * na vsaki strani 4 x 3 tone vgrajenih in zložljivih pritrdilnih točk * ojačana in certificirana nadstavba po standardu EN 12642 XL, vključno s certifikatom za pritrditev tovorja do 19 ton * barvanje stranskih sten v RAL barvi po želji (vendar ne posebna ali metalik barva), ki jo je mogoče spremeniti do približno 6 tednov pred dokončanjem Hodpfxexl Nkgo Agponu * osi, zračni rezervoar, podorna opora, prirobnični priključek so pobarvani v črni barvi * podvozje, spodnji ščit in priključna prikolica so prevlečeni z vročo pocinkovanjem * novo vozilo s polno garancijo proizvajalca * Napake in prodaja pod pridržkom * na voljo približno od 3. tedna leta 2027

Stanje: rabljeno, največja dovoljena obremenitev: 12.080 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2024, dolžina tovornega prostora: 3.900 mm, širina tovornega prostora: 1.920 mm, višina nakladalnega prostora: 415 mm, Leto izdelave: 2022, Oprema: ABS, * ETM-TA 14.4: ----Brakes: * Wabco ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange towing eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolt-on towing eye ----General attachments: * Jost landing gear at the front * Side underrun protection * Foldable A-panel at the rear ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----Superstructure: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding plate cover 750 x 1,000 mm at the front incl. 2 removable skip stops, front in 2 positions * Rear cross member for attaching aluminium ramps, incl. 2 additional drop-down supports at the rear ----Loading edge: * Unloaded loading edge approx. 710 mm ----Load securing: * 4 removable skip stops, can be inserted into 2 positions for lateral centring of the skips * On each side: 1 x (13.5 t) UVV lashing point for attaching tensioning devices * 2 ratchet tensioners (spindle adjustment) with compensating chain and quick-shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paintwork: Hjdpol Th Eyefx Agpenu * Chassis, front wall, side walls, mudguards, drawbar, rear drop supports hot-dip galvanized * The axles, springs, landing gear, and air tank painted in a black tone ----General information: * Vehicle has a one-day registration in 06/2024, due to missing tyre pressure monitoring system it has not been loaded/used * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 23.890 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Vehicle from current production NEW VEHICLE Fliegl 3-axle low loader type DTS 300, hot-dip galvanized Gross weight: 24,000 kg / 30,000 kg Hedpfx Ajk N Adkjgpjnu Payload: 17,890 kg / 23,890 kg Unladen weight: 6,080 kg Overall length: 10,900 mm Load length: 8,680 mm Loading bed: 6,500 mm incl. 900 mm approach ramp Loading height: 860 mm Air suspension with lift and lower valve Long loading ramps 2,800 mm, hydraulically operated Extendible width to 3,000 mm with warning signs and rotating beacon Heavy-duty lashing package with 5.0 and 10.0 t lashing points 5 pairs of stake pockets Drawbar eye 40 mm plus delivery/transport fee ex-stock Wiesmoor EUR 1,280.00 net Hire purchase offer: Term 48 months, final residual value 40%, down payment VAT only. Monthly instalment: EUR 609.00

Stanje: novo, največja dovoljena obremenitev: 33.440 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.000 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 2.900 mm, skupna širina: 2.550 mm, skupna višina: 3.900 mm, Oprema: ABS, SCHWARZMÜLLER 3-Axle Timber/Stake Semi-Trailer - New Vehicle IMMEDIATE AVAILABILITY!! Tractor Unit Data and Equipment - 4,500 mm maximum distance from tractor unit front edge to king pin center - 2,240 mm minimum clear front space from king pin center - 1,900 mm max. rear swing radius - GCVW (Gross Combination Weight, permitted): 44 t for short and long haul, or with special permit - GVW (Technical): 39 t - Axle group load (technical): 27 t - King pin load (technical): 12 t Dimensions - Frame length: approx. 13,000 mm - Overall width: max. 2,550 mm - Loading height front/rear: approx. 1,340 mm - Trailer in level position at approx. 1,150 mm coupling height - Overall loading height: approx. 1,510 mm Construction - Welded steel frame construction - Lightweight high-strength fine-grain steel chassis - Straight frame design, all stanchion holders mounted on the chassis - Frame height at front: approx. 190 mm (without stanchion holders) - Replaceable 2" king pin - Chassis for coupling height (unloaded) approx. 1,150 to 1,250 mm with air suspension tractor unit - 12 mm phenolic plywood decking between longitudinal beams, bolted, extended to front up to landing legs (protects tractor) and at rear above running gear, flush with top edge of crossmembers - Landing legs, 2 x 12 t, single-side operation (right), force equalization - Reinforced crossbeam for loading/unloading while uncoupled Axle and Suspension - 3x SAF Intradisc Plus Integral axles, disc brakes Ø430 mm (22.5"), 9 t/axle load, reinforced axle bodies, off-road version - Axle spacing: 1,310 + 1,410 mm - Axle lift on 1st axle, automatically raises/lowers dependent on load, with forced lowering and speed-limited start-up assistance (operated via cab button and brake pedal sequence) - 6 x 385/65 R 22.5, 164K steel rims 11.75 x 22.5, ET120 mm, silver Braking System - Brake system as per EC directives 71/320 or ECE R13 - Dual-circuit air brake system as per factory specification - EBS system 2S/2M, one axle sensed - RSS (Roll Stability Support) - Spring-loaded parking brake on 2 axles - Aluminum air tanks - Brake/air connections with 2 individual coupling heads (yellow/red) - EBS/ABS socket at front Air Suspension - Air suspension with raise/lower function - Automatic level set to programmed drive height above 15 km/h - Air bag diameter 360 mm Telematics - SWIT Schwarzmüller Intelligent Telematics, "LOCAL TRAC" package - Axle load display via EBS CAN bus signal, information shown on cab display Superstructure - Extra-strong steel headboard, approx. 2,500 mm high, with 2 strong central supports, top corners chamfered approx. 300 mm/45° Hnedpjn Hrg Rsfx Agpsu - Stanchion holders mounted/adjustable, spacing: approx. 600 mm, then every 2,400 mm - 6 ExTe stanchion holders type 144, bolted clamp fitting - Stanchion tilt approx. 0.8° inward (suitable for sawn timber transport) - 6 pairs ExTe stanchions 144-S with bolted fitting, telescopic (2-piece), max. load per pair 7 t, coated in original signal orange - Telescopic key for stanchion operation - Stanchion load height: max. approx. 2,800 mm - 8 claw guard plates, approx. 200 mm long, fitted between stanchion holders (side) - 6 pairs lashing hooks on stanchion holders Lighting - 24V lighting system as per EC directive 76/756/EEC - 2 full LED five-chamber tail lights "Aspöck" with integrated control unit - 2 LED front position lights - 2 rear LED marker lights - Flashing LED side marker lights, activated via indicator signal - 2 license plate lights - 2 x 7-pi

Stanje: novo, lastna masa: 783 kg, največja dovoljena obremenitev: 2.193 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.300 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 900 mm, vzmetenje: drugo, velikost pnevmatike: 195/50 r13, *++++TAKOJ NA VOLJO+++* Tip: 3-stranski kiper Vključene rampe Vključene zgornje preklopne stranice 60 cm Mere: D x Š: 330 x 180 cm Skupna masa (kg): 3.000 – dvonadstropna prikolica z zavoro Višina tovorne površine (cm): Upravljanje: električna črpalka Nadgradnja: stranice – 30 cm Pnevmatike: 195/50R Hnsdpjqwz Dvsfx Agpou Če vam je bil isti priklopnik ponujen po ugodnejši ceni, vas prosimo, da nam ponudbo pokažete! Imate vprašanja? Pošljite nam sporočilo ali nas pokličite! Pridržujemo si pravico do tehničnih sprememb, sprememb cen, napak in predhodne prodaje. Za napake in tiskarske napake ne odgovarjamo.

Stanje: novo, lastna masa: 817 kg, največja dovoljena obremenitev: 2.683 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.300 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 900 mm, vzmetenje: drugo, velikost pnevmatike: 195/50 r13, *+++SOFORT VERFÜGBAR+++* Dieser Kipper ist der Preisleistungssieger in der Oberen Qualitätskategorie. Vom Bagger bis zu schweren Kies macht es diesem Anhänger auch mit leichter Überladung überhaupt nichts. Schnelles abkippen und eine gute Straßenlage machen diesen Anhänger aus. Typ: 3-Seitenkipper Inklusive Rampen Inklusive Aufsatzbordwände 60cm Pendelbar Maße: L x B: 330 x 180 cm Gesamtgewicht (kg):3.500 - gebremster Doppelachser Ladeflächenhöhe (cm): Bedienung: elektrische Pumpe Aufbau: Bordwände - 30 cm Reifen: 195/50R Sollten Sie den gleichen Anhänger zu einem günstigeren Preis angeboten bekommen, bitten wir Sie uns dieses vorzulegen !!! Sie haben Fragen, dann schicken Sie uns eine Nachricht oder rufen Sie uns an! Technische Änderungen, Preisänderungen, Irrtümer und Zwischenverkauf vorbehalten. Für Irrtümer und Druckfehler wird keine Haftung übernommen. Hsdpfxsqwz Ivj Agpsnu