Müller-Mitteltal Pt 30,0 Kompakt Gerade Fläche Container Nr.: 540 nakup rabljenega (9.642)

Stanje: novo, največja dovoljena obremenitev: 23.210 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, * T 3: * ABS braking system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel packages front & rear * Front closed plastic mudguards and rear straight galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox located on the turntable platform * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm – black powder-coated – mounted to the side under the chassis * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon (rotating warning light) at rear * Drawbar scissors with 40 mm towing eye and height adjustment via drawbar spring & turnbuckle * 4 stake pockets per side (stakes not included), with integrated lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 5 pairs of UVV folding and lowering lashing rings * Loadable in all directions and recessed into the external frame; corner loads up to 13.4 t, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for total width of 3 m (not at the rear taper) Bdjdpfx Ajtplwfsbpsd * Extension boards stored in a compartment under the loading area * Digger stick rest over the rear axle up to the end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at the sides of the digger stick rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load-holding valves, hydraulically adjustable lateral ramp shift * Hydraulic flow divider in the trailer (suitable for truck hydraulic pump outputs over 40 ltr. up to max. 140 ltr./min), two-circuit hydraulics * Loading area above the turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded loading height approx. 860 mm +/- 30 mm adjustment unit * Chassis, turntable, fold-out outriggers, rear drop legs and drive-on ramps hot-dip galvanized * Axles, springs, drawbar scissors, air tanks, etc. painted in black * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from CW 19/2026

Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * KA-TA-RT 18.0: ----Brake: * EBS (Electronic Braking System) * Emergency release for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering device, including Ride-Through-Release (RtR) valve and manual lowering function for loading ----Drawbar / Flanged Drawbar Eye: * Drawbar with positive-locking height adjustment * 50 mm flanged drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V fitted in underrun protection ----General Attachments: * Support winch at front * Fold-away rear support legs on the outside * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on right side * Plastic quarter mudguards ----Tipping Body: * Steel pallet – 3-way tipper body made of high-tensile fine grain steel with high M-Strong side panels and reinforced 180 bar tipping cylinder * Fixed front wall made of smooth sheet steel * Hardwood strip for excavator bucket screwed onto front wall * Continuous side panels – fold-down without center pillar, with sideboard spring-assist lifters and swinging function via manual central locking * Bolt-on rear stanchions * Combination steel swing doors at rear, 2-leaf, asymmetrically split, able to swing open 270° and lockable (not foldable), including additional swinging frame for automatic rear door opening when tipping; locking by galvanized rotating bar lock and central locking, deactivation function for automatic rear door opening when tipping backwards with opened swing doors * 4 mm steel floor plate * Two-step access on the left front * Rear ramp track for loading ramps ----Load Securing: * One 7 t lashing ring in each corner * Four 3 t lashing eyes recessed in the outer frame on each side ----Loading Ramps: * Recessed ramp compartment at rear of chassis * 1 pair aluminium loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipping platform, underrun protection, and rear supports hot-dip galvanized * Sideboards painted in any desired RAL colour (excluding special or metallic paints), can be changed up to approx. 6 weeks before completion * Axles, air tanks, flanged drawbar eye, and front support winch painted in black ----Info: * --Load securing certificate according to EN 12642 XL? * Errors and intermediate sale reserved Bedpfx Asvin Ucobpodd ----Delivery Time: * Available from approx. CW 45 / 2026

Stanje: novo, največja dovoljena obremenitev: 8.800 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.370 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 11.9: ----Brakes: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by 300 mm * 40 mm flange towing eye ----General Attachments: * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox, front right outside on the front wall * Side underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: * Platform length 5.37 m * 50 mm softwood floor * Bolted smooth sheet steel front wall * Fold-down side walls made of trapezoidal-profiled steel sheet with board lifting spring * Rear wall made of steel, insertable between the ramp holders for storage in front of the front wall when not in use * Rear stanchions bolted ----Load Securing: * Perforated outer frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm * Installation of 3 t recessed lashing rings every 600 mm possible * In each corner front and rear, 1 x 6.3 t lashing ring * Various holes in front and rear crossmembers for 1.2 t lashing options ----Ramps: * One-piece mechanical grating loading ramps with spring system for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear approach angle approx. 860 mm chassis ----Tyres: * Tyres 235/75 R 17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, front wall, tailgate, folding supports, loading ramps galvanized * Axles, springs, air tanks, 40 mm flange towing eye painted in black * Board walls painted in RAL2011 deep orange * Side panels available in other RAL colors at extra cost ----Information: Bdjdpjl Th Ncsfx Abpsd * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available ex works Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 Masterline: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange eye Bdedpopk D D Ujfx Abpod ----General Attachments: * Jost mechanical landing gear (front) * Two rear mechanical hot-dip galvanized fold-down supports * Tool box made of galvanized steel sheet, mounted right side * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * Bolted underride guard with LED tail lights ----Tipping Platform: * Net hooks on the sides and rear in the central locking mounts as well as 3 external on the front wall * Hot-dip galvanized chassis * Steel pallet 3-way tipper body, fully galvanized * Continuous, drop-side walls with spring-assisted board wall lifters, can be folded down—no center stanchions * Tailgate foldable and pendulum-mounted via manual central locking * Hot-dip galvanized bolted rear stanchion ----Load Securing: * 1 recessed and foldable 5 t lashing ring in each corner, as well as 4 recessed and foldable 3 t lashing rings on each side in the outer frame * 4 mm steel sheet floor, rear mount rail for ramps ----Ramps: * 1 pair aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear, integrated into the chassis ----Tires: * 235/75 R 17.5 tires ----Paint Finish: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle is hot-dip galvanized ----Notes: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * KA-TA-RT 18.0: ----Braking System: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, including RtR valve and manual lowering for loading operations ----Drawbar / Flange Drawbar Eye: * Drawbar with positive-locking height adjustment * 50 mm flange drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V integrated in underrun protection ----General Attachments: * Landing gear at the front * Fold-out support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Plastic quarter mudguards ----Tipper Body: * Steel 3-way tipper body made of fine-grain steel with high M-Strong side walls and reinforced 180 bar tipping cylinder * Fixed front wall, smooth sheet steel * Hardwood pad for excavator bucket bolted to front wall * Continuous, folding drop sides without central stanchion, with sideboard spring assist and manual central locking system * Screwed-in rear stanchions * Combination steel swing doors, asymmetrical 2-leaf rear wall, can be swung and locked at 270°, not foldable, with additional swinging frame for automatic rear wall opening during tipping, locking via galvanized rotary bar lock and central locking system, deactivation function for automatic rear wall opening when tipping reverse with open swing doors * 4 mm steel floor plate * Two-step entry left front * Rear mounting rail for loading ramps ----Load Securing: * 1 x 7 t lashing ring in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Loading Ramps: * Integrally mounted ramp storage at the rear of the chassis * 1 pair of aluminum loading ramps (10 t / pair) approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: Bodpfx Aovin T Sjbpsdd * Chassis, drawbar, rear stanchions, front wall, tipping platform, underrun protection, rear folding supports hot-dip galvanized * Sideboard paintwork in RAL custom color (with exceptions for special or metallic paintwork); can be changed up to approx. 6 weeks prior to delivery * Axles, air tanks, flange drawbar eye, front landing gear painted in black ----Information: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. CW 45 / 2026

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle units ----Suspension: * Parabolic springs with balancing unit ----Drawbar / Flange Eye: * Drawbar height adjustable by approx. 300 mm * 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at front * Bolt-on, hot-dip galvanized folding supports at rear (external) * Side underrun protection Bedol Tilxopfx Abpedd * Plastic quarter mudguards * Plastic toolbox on front right, externally mounted on front wall ----Electrics / Lighting: * Tyre pressure monitoring system (TPMS) * 15-pin power connector * LED tail lights ----Load Area: * 50 mm softwood floor * 20" container locks mounted at front and rear * Bolted bulkhead made of smooth steel sheet * Drop sides made of trapezoidal-profile steel sheet, foldable with sideboard spring lifter * Hot-dip galvanized bolted rear stanchions ----Load Securing: * Perforated outer rail, edged at approx. 45°, with lashing capacity of 2 t every 480 mm * Optional 3 t folding lashing brackets every 600 mm (five lashing rings mounted per side) * One 6.3 t lashing ring in each corner, front and rear * Various bores in front and rear crossmembers for 1.2 t lashing points ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear storage compartment recessed into the chassis frame under the loading area ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Sideboard colour in RAL 9010 pure white * Painting of side walls in a RAL colour of choice available at extra charge ----Information: * New vehicle, not registered * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * KA-TA-R 14.4 ----Braking system: * Wabco EBS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: Bdedpfjv Dz N Nox Abpjd * Parabolic springs with tandem compensating unit ----Drawbar / Flange towing eye: * Vertically adjustable (approx. 300 mm) hot-dip galvanized drawbar with 40 mm flange towing eye ----General attachments: * Jost mechanical landing gear, front * 2 mechanical, hot-dip galvanized folding supports at the rear * Hot-dip galvanized bolted underrun protection * Toolbox made of galvanized sheet steel, right side * Plastic quarter mudguards * Two-step step on the left side as access aid ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED tail lights ----Tipper body: * Steel, pallet-width, 3-way tipper body * Continuous upper sidewalls with inner pipe reinforcement, foldable without center stanchions, with drop side spring assist * Tailboard foldable and swinging with manual central locking * Hot-dip galvanized, bolted rear stanchions * 4 mm fine-grain steel floor * Net hooks, mounting rail at the rear for approach ramps * Prepared for subsequent installation of sidewall extensions ----Chassis: * Hot-dip galvanized chassis ----Load securing: * Each corner equipped with 1 x 5 t lashing ring, each side with 4 x 3 t lashing eyes recessed in the outer frame ----ALU approach ramps: * 1 pair aluminum approach ramps approx. 3570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear-lockable storage compartment under the loading area, integrated into the chassis ----Tyres: * Tyres 385/55 R 22.5 ----Paintwork: * Axles, springs, air tanks and landing gear painted black * Chassis, drawbar, floor, front wall, folding supports hot-dip galvanized * Side boards painted in a RAL custom color (no special or metallic paint), color can be changed up to approx. 6 weeks before completion ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without first registration, including manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 29 / 2026

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-R 14.4 Bedepk Dv Repfx Abpsdd ----Braking System: * EBS Electronic Braking System * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Tow Bar / Flange Towing Eye: * Height-adjustable tow bar, adjustable by 300 mm * Tow bar extension by 250 mm to a total of 2,250 mm * 40 mm flange towing eye ----Lighting / Electrics: * Tire pressure monitoring system (TPMS) * LED rear lights 12 / 24 V * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox on the front right side of the headboard * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Preparation in front of the headboard for retrofitting container locks * Bolted headboard made of smooth sheet metal * Trapezoidal profiled drop-side walls made of steel, foldable with drop-side spring assist * Steel rear wall insertable between ramp mounts; when not in use, stowed inside in front of the headboard * Bolt-on rear posts * Rear approach angle approx. 860 mm ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Possible installation of 3 t drop lashing rings every 600 mm * One 6.3 t lashing point in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing options ----Ramps: * One-piece mechanical grid ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be telescoped down to 20 mm) ----Painting: * Hot-dip galvanized chassis as well as tow bar, headboard, rear wall, tailgate, and ramps * Side wall color RAL 9010 pure white * Painting of side walls in a RAL color of choice available at extra cost ----Information: * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately ex works Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 Masterline: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange eye ----General Attachments: * Jost mechanical landing gear (front) * Two rear mechanical hot-dip galvanized fold-down supports * Tool box made of galvanized steel sheet, mounted right side * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * Bolted underride guard with LED tail lights ----Tipping Platform: * Net hooks on the sides and rear in the central locking mounts as well as 3 external on the front wall * Hot-dip galvanized chassis * Steel pallet 3-way tipper body, fully galvanized * Continuous, drop-side walls with spring-assisted board wall lifters, can be folded down—no center stanchions * Tailgate foldable and pendulum-mounted via manual central locking * Hot-dip galvanized bolted rear stanchion ----Load Securing: * 1 recessed and foldable 5 t lashing ring in each corner, as well as 4 recessed and foldable 3 t lashing rings on each side in the outer frame * 4 mm steel sheet floor, rear mount rail for ramps ----Ramps: * 1 pair aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear, integrated into the chassis ----Tires: * 235/75 R 17.5 tires ----Paint Finish: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle is hot-dip galvanized ----Notes: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf on the A7 Bjdpfxspk D Dmj Abpsdd

Stanje: novo, največja dovoljena obremenitev: 13.830 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 900 mm, Leto izdelave: 2026, * KA-TA-R 18 ----Brakes: Bdodpsx Ipbyjfx Abpjd * EBS-E (electronic braking system with RSS) * Emergency release for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 9 t Gigant axles ----Suspension: * Air suspension with level control during tipping ----Electrics / Lighting: * Tire pressure monitoring system with display possibility in the truck dashboard via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting with galvanized protective cover * 2 LED reversing lights ----Drawbar eye / Drawbar: * Drawbar with 50 mm flange towing eye (adjustable by +77 mm and -33 mm using offset plate) ----General attachments: * Landing leg at the front * Foldable galvanized steel underrun guard for paver feeding * Enclosed single plastic mudguards * Front wall platform made of grating with step on drawbar and handholds on the front wall ----Chassis: * Chassis made of fine-grain steel ----Tipper body: * Steel 3-way tipper body with continuous asymmetrical aluminum side walls – without center stanchion – pendulum-mounted with manual central locking, left side foldable with side board spring lifter * Tailgate – made from HBW 400 steel – pendulum-mounted with automatic 2-claw lock * 5 mm steel floor made from HBW 450 steel ----Load securing: * 4 x 3 t lashing rings per side – recessed and foldable – integrated into the steel floor ----Roll tarp: * Roll tarp – agate grey, similar to RAL 7038 * Tarpaulin tensioning using ratchet tensioners on the sides and tensioning rubber at the front and rear ----Painting: * Chassis, underrun guard, and drawbar hot-dip galvanized * Axles, air tanks, landing leg, and flange towing eye painted in a shade of black * Side wall painting according to RAL color of choice (excluding special or metallic paints); color can be changed up to approx. 6 weeks before completion ----Info: * Reinforced and certified body according to EN 12642 XL, including load securing certificate up to 19 t * New vehicle without first registration, with manufacturer’s warranty * Subject to errors and prior sale * Sample images (vehicle images may vary due to special equipment) ----Delivery time: * Vehicle available from week 42/2026

Stanje: rabljeno, največja dovoljena obremenitev: 12.080 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2024, dolžina tovornega prostora: 3.900 mm, širina tovornega prostora: 1.920 mm, višina nakladalnega prostora: 415 mm, Leto izdelave: 2022, Oprema: ABS, * ETM-TA 14.4: ----Brakes: * Wabco ABS braking system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolt-on drawbar eye ----General Attachments: * Jost landing gear at the front * Lateral underrun protection * Foldable A-frame shield at the rear ----Electrics / Lighting: * 15-pin power socket * Multi-chamber taillights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding steel plate support 750 x 1,000 mm at the front, incl. 2 interchangeable skip stops at the front, plug-in at 2 positions each * Rear crossmember designed for aluminum loading ramps, incl. 2 additional drop-down supports at the rear ----Loading Edge: * Unloaded loading height approx. 710 mm ----Load Securing: * 4 repositionable skip stops, can be placed in 2 positions for lateral centering of skips * Each side with 1 x (13.5 t) UVV tie-down point for securing lashings * 2 ratchet tensioners (spindle adjustment) with balancing chain and quick shortener (tension force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paint / Finish: * Chassis, front wall, side walls, mudguards, drawbar, rear drop supports hot-dip galvanized * Axles, springs, landing gear, and air tanks painted in black ----General Information: * Vehicle has a day registration from 06/2024 due to missing tire pressure monitoring system and has not been loaded/used Bdedpfel Th Dmjx Abpjd * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 14.650 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2024, * RS-T 18.0 / 018: * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release mechanism for spring-loaded cylinders * Disc brakes * Duomatic brake coupling * 2 x 10-ton SAF axles * Air suspension with automatic lowering when uncoupling the brakes * Drawbar 2,300 mm long with 40 mm towing eye and height adjustment via draw spring & spindle * Plastic tool box on right side, enclosed plastic mudguards * Enclosed side underrun protection suitable as advertising space * Rear underrun protection with 2 impact buffers * Foldable "A" sign at the rear for waste disposal * LED tail lights with protective cover * 2 x 7-pin electrical connectors Bodpfjl Tqkwsx Abpjdd * Chassis hot-dip galvanized (excluding air tanks, axles, drawbar, etc.) * Roller track length approx. 6,950 mm * Locking of the roll-on container using pneumatic 4-point claw system * Front: 2 insertable container stops with 2 additional locking positions * Unladen ride height approx. 1,165 mm * --Permissible gross weight technically possible: 20,000 kg-- * Suitable for container lengths of 5,000 to 7,000 mm * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 9.070 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.010 mm, višina nakladalnega prostora: 325 mm, Leto izdelave: 2026, * ETS-TA-B 11,9: * Wabco EBS (elektronski kočioni sistem) * RDÜ (nadzor pritiska u pneumaticima) * Bubanj kočnice, 2 x 5,5 t Gigant osovine * Parabolične opruge sa balans agregatom * Vučna ruda podesiva po visini oko 300 mm * BPW oslonac (nožna dizalica) * Mehaničke zadnje potpornice * Plastična kutija za alat napred desno uz čeonu stenu * Bočna zaštita od podlijetanja * LED osvetljenje Bdedpfx Abewyhzvopjd * Pod od mekog drveta (nordijska jela) debljine 50 mm * U uglovima ispred čeone stene i zadnjeg nosača po 1 x 6,3 t anker, kao i sa svake strane po 2 UVV ankerska prstena od 6,3 t ugrađena u spoljašnji ram * Jednodelne mehaničke rampe od rešetkastog metala sa oprugom za upravljanje jednom osobom, dimenzija cca 2.350 x 870 mm (unutrašnje rastojanje 20 mm, rampe nisu pomične) * Čeona stena, bočne stranice, blatobrani i vučna ruda toplo pocinkovani * Osovine, opruge, vazdušni rezervoar, prednji oslonac lakirani u crnoj boji * Novo vozilo sa punom fabričkom garancijom * Zadržavamo pravo na greške i međuprodaju * Dostupno od približno 35. nedelje 2026.

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic braking system (EBS) * Emergency release device for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic suspension with equalizer unit ----Drawbar / Flange towing eye: * Height-adjustable drawbar, adjustable by approx. 300 mm * Drawbar extension by 250 mm (up to 2,250 mm) * 40 mm flange towing eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox, front right outside on the front wall * Side underrun protection * Plastic quarter mudguards ----Low-bed loading area: * 50 mm softwood flooring * Pre-equipment for retrofitting container locks in front of the front wall * Bolted front wall made of smooth sheet metal * Foldable, trapezoidal-profiled steel side walls with drop-side spring assist * Sliding steel rear wall between the ramps (bracket for storage when not in use inside the front wall) * Bolted rear stanchions ----Load securing: * Perforated outer frame, bent at approx. 45°, with 2 t lashing capacity every 480 mm * Option to fit 3 t drop lashing rings every 600 mm * In each corner, front and rear: 1 x 6.3 t lashing ring * Various holes in the front and rear cross members for 1.2 t lashing options ----Ramps: * One-piece mechanical steel mesh ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Rear approach angle approx. 860 mm Bodpfoxglibjx Abpodd ----Paintwork: * Hot-dip galvanized chassis, drawbar, front wall, ramps, and rear wall * Drop-side color in RAL 9010 pure white * Painting of side walls in any RAL color available at extra cost ----Info: * Reinforced and certified body according to EN 12642 XL including load securing certificate * New vehicle with manufacturer’s warranty * Subject to prior sale and errors excepted ----Delivery time: * Available from approx. calendar week 30/2026

Stanje: novo, največja dovoljena obremenitev: 6.870 kg, skupna masa: 9.900 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9.9 ML: ----Brakes: * EBS braking system * Drum brakes * Emergency release device for spring-loaded cylinders ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Coupling Eye: * Drawbar with 40 mm bolted towing eye (height-adjustable) ----Electrics / Lighting: * 15-pin power connector * LED lighting * Flashing LED side marker lights * RDÜ tire pressure monitoring system ----General Attachments: * Support winch at the front * Spring-assisted square tube supports at the rear with base plate, safety lock pin for various support heights * Enclosed steel mudguards with spray protection * Enclosed side underrun protection usable as advertising panel * Plastic toolbox with floor insert (installed horizontally), approx. 500 x 350 x 400 mm ----Body: * Swiveling cable drum body, clear width between drum arms 1,700 mm, with tension lock for securing drums at the support arm ends, as well as a central claw lock to secure the cable drum body to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft with 76 mm diameter including centering and rotating ends * 1 pair of polyamide centering cones, stepwise offset ----Chassis: * Chassis made of torsion-resistant square tubes and cross beams Bsdpou I Iqxefx Abpodd ----Pump Unit: * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) ----Tires: * 315/80 R 22.5 ----Unladen Weight: * 2,690 kg unladen weight ----Paintwork: * Vehicle hot-dip galvanized ----Information: * New vehicle with full manufacturer's warranty * Errors and prior sale reserved ----Delivery Time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic brake system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11-tonne Gigant axles ----Suspension: * 17.5" air suspension with lift and lowering device ----Drawbar: * 1,800 mm long drawbar with 40 mm towing eye Bsdpfx Absx Nli Nopjdd ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck display via EBS signal (no truck-side installation required) * 15-pin power connector * 2 additional LED reversing spotlights (switched via reverse gear) * LED lighting ----General fittings: * Aluminium air tank * Stainless steel toolbox on the side, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Platform: * Zurr-fix outer frame bent at 45°, hole pattern for lashing equipment, lashing force per lashing point 2,000 kg at a spacing of 480 mm * Installation of 3,000 kg drop lashing brackets at approx. 600 mm spacing possible – each side is equipped with 12 pcs. 3,000 kg lashing brackets included in delivery * Each side has 5 pockets for 100 x 50 mm stake posts in the outer frame – stakes not included in delivery * 30 mm phenolic resin-coated plywood floor ----Drum supports: * 3 pcs. galvanised drum supports secured by container locks with side forklift pockets center/center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross-bracing * Permissible drum weight per cable support 6,000 kg * Without drive and drum brake * Support arm with clamping lock for securing drum shaft * Steel drum shaft 76 mm diameter, with centring and rotating ends * 2 locating rings * 2 centring cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms for securing the drum against rotation and uncoiling by the customer ----Loading height: * Approx. 1,040 mm loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, underrun protection hot-dip galvanised * Axles painted in a shade of black ----Information: * Technical upgrade to 30 tonnes GVW possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from week 51/2026

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lowering system, including RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection Bjdey Ngzyjpfx Abpjdd * Support legs at the front and mechanical swivel supports at the rear of the chassis * Straight pressed steel fenders * Spare wheel holder under the chassis, right side ----Low Loader Deck: * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear board plug-in, 150 mm high * Rear slope on fifth wheel platform to low-bed approx. 700 mm long * Fifth wheel platform with 50 mm timber planks, low-bed deck with 60 mm timber planks * Tread plate above the axles ----Widenings: * 8 x mechanical folding extensions to a total width of 3 meters (not on rear slope; extension planks available with storage on the platform) * Mechanically adjustable warning panel sets front and rear ----Load Securing (Lashing Package): * On the fifth wheel platform: 2 x 6.3 t lashing rings on each side, plus 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side, plus 4 x 10 t lashing rings, pivotable and lowerable, recessed in the outer frame * 2 x 6.4 t lashing eyes per side, plus 1 lashing ring at the excavator arm rest * 2 x container locks directly after the neck in the low-bed platform ----Excavator Arm Rest: * Continuous excavator arm rest from end of last fixed axle over steering axle to end crossbeam, with internal reinforcements, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanical one-piece hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * Outer board on ramp made from 50 mm hardwood * Climbing strips on outer frame of ramp and on approach slope * Rubber matting on ramp and approach slope ----Hydraulics: * Hydraulic flow divider in trailer (for hydraulic pump performance in the truck between 40 l/min and 120 l/min) ----Loading Dimensions: * Fifth wheel platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Coating: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, support legs, air tanks painted in a black shade * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images may show equipment not included with the offered vehicle ----Delivery time: * available from c

Stanje: novo, največja dovoljena obremenitev: 6.870 kg, skupna masa: 8.800 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9.9 ML: ----Brakes: * EBS brake system * Drum brakes * Emergency release device for spring-loaded cylinders ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Flange eye: * Drawbar with 40 mm screwed towing eye (height adjustable mm) ----Electrics / Lighting: * 15-pin power connector * LED lighting * Flashing LED side marker lights * RDÜ tire pressure monitoring ----General attachments: * Support winch at the front * Spring-assisted square tube supports at the rear with base plate; safety locking pins for various support heights * Closed steel sheet mudguards with splash protection * Closed side underrun protection, can be used as advertising space * Plastic toolbox with floor insert (installed horizontally), approx. 500 x 350 x 400 mm ----Superstructure: Bodpsu I Iqlsfx Abpodd * Pivoting cable drum superstructure, clear width between drum arms 1,700 mm, with tension locks for securing the drum at the ends of the support arms, and central claw locking device securing the drum superstructure to the chassis * Motor-hydraulic drum drive with oil motor * Valves and movable, rubber-covered drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 1 pair of stepwise offset centering cones made of polyamide ----Chassis: * Chassis made of torsion-resistant square tubes and cross members ----Pump unit: * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) ----Tires: * 315/80 R 22.5 ----Unladen weight: * 2,690 kg unladen weight ----Paintwork: * Vehicle is hot-dip galvanized ----Information: * New vehicle with full manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 37.560 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 ton BPW axles * Start assist for shunting purposes on the first axle, activated via EBS (without truck-side installation) * Last axle is a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle for maneuvering purposes from the driver’s cab via EBS (without truck-side installation) ----Suspension: * Air suspension with lift and lowering function as well as RtR valve ----Electrics / Lighting: * Smart-Board infotool mounted on trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at rear for overlength lighting * Side marker lamps with indicator function * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Support legs at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Swing arm as a carrier for connecting lines from truck to semi-trailer ----Low Loader Platform: * 2nd king pin position * Gooseneck platform with 45° chamfered front corners and front-mounted toolbox made of galvanized, powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm aluminum side boards (in desired RAL color) foldable and removable along the gooseneck platform * Rear wall, insertable, height 150 mm * Rear incline on the gooseneck platform to the low-bed approx. 700 mm long with checker plate covering and at the end a perforated strip for attaching aluminum approach ramps * Gooseneck platform with 50 mm clamped wooden planks, low-bed platform with 60 mm clamped wooden planks * Tread plate over axles * 9 mechanical extension panels to a total width of 3 m, not included in the rear incline (extension planks available with closed transverse stowage compartment under load floor) * Preparation for 3 storage recesses under the gooseneck platform for optional storage of aluminum approach ramps or planks for covering wheel recesses * Preparation for container locks on the swan neck ----Load Securing (LaSi Package): Gooseneck platform: * Perforated outer frame, 45° angled, with hole pattern for lashing devices (2 t lashing capacity per point with a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings recessed into the floor per side (1 x on gooseneck platform, 1 x on longitudinal frame after the cranking, 1 x above middle axle next to longitudinal frame) Low-bed platform: * 3 x 13.4 t lashing rings per side at the outer frame (1 x start of gooseneck cranking, 1 x start of approach ramp, 1 x end of approach ramp) Bsdpoykx Nkofx Abpodd * 2 x 10 t lashing rings per side (1 x between front wheel recess and 1st axle, 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings per side screwed to outer frames of the wheel recesses (2 at front wheel recess, 1 at rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last rigid axle over the steering axle to the end cross member, continuous with internal reinforcing profile approx. W = 770 mm x T rear

Stanje: novo, največja dovoljena obremenitev: 13.500 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 18.0: * 3-in-1 = for roll-off containers, skip containers, and as a low-loader ----Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm drawbar eye with height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS, display option in the truck via EBS signal (no installation required on the truck side) ----General Attachments: * Toolbox made of powder-coated steel sheet, right side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box made of galvanized sheet metal for container nets, approx. 960 x 300 x 400/450 mm, right side * Plastic bumper buffer at rear * Mechanical drop-down supports at rear ----Load Area: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll containers * Steel floor with roller recesses in the bogie area * Possible to transport roll-off containers with a length of 5,500–7,000 mm * Pneumatic four-point clamp locking as well as mechanical locking angles at the front in the track, securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. volume of 10 m³ possible * Includes 8 removable tub stops for lateral centering of the tubs; front 4 stops plugged in with pivotable stop * Weld bead as anti-slip coating in the ramp area of the run-up incline ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements to securely fix the tubs * 4 lashing bars per side, cloverleaf design * 1 pair of 13.4 t UVV lashing rings at the front Bdsdsl Thv Rjpfx Abpsd ----Ramps: * 1 pair of aluminium drive-on ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-wheeled and tracked vehicles (lockable storage compartment accessible from the rear) ----Information: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Permissible gross weight up to 20,000 kg technically possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. calendar week 44 / 2026

Stanje: novo, največja dovoljena obremenitev: 13.500 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 18.0: * 3 in 1 = for roll-off containers, skip containers, and as a low-loader ----Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye and height adjustment device ----Electrical / Lighting: * LED tail lights * 15-pin power connector * TPMS, display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Tool box made of powder-coated sheet steel, right side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets, made of galvanized sheet, approx. 960 x 300 x 400 / 450 mm, right side * Plastic rear collision protection buffers * Mechanical drop-down supports at the rear ----Loading Area: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide roll containers * Steel floor with roller recesses in the bogie area * For roll-off container transport, possible container length from 5,500 to 7,000 mm * Pneumatic 4-point clamp locking as well as mechanically insertable stop angles at the front in the track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 removable skip stops for lateral centering of the skips, front 4 skip stops inserted with pendulum mount * Weld bead as anti-slip coating in the ramp area Bjdpfx Abol Thwcspedd ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tension elements for positive and non-positive securing of the skips * 4 lashing bars each, cloverleaf design (side) * 1 pair of 13.4 t UVV lashing rings to the front ----Ramps: * 1 pair of aluminum access ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Information: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Permissible gross weight of 20,000 kg technically possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. CW 44 / 2026

Stanje: novo, največja dovoljena obremenitev: 8.850 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem compensating unit ----Drawbar / Flange Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flange eye ----General Fittings: * Jost mechanical landing gear at front * Rear: 2 mechanical, hot-dip galvanized drop-down support legs * Plastic toolbox approx. 750 x 350 x 300 mm, fitted on right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS tire pressure monitoring system ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking fixtures, plus 2 at the front wall * Steel pallet, 3-way tipping body (continuous sidewalls – without center stanchions – foldable with drop side spring assistance) * Rear stanchions bolted * Combination steel double rear doors, asymmetrically split, can be swung open and locked at 270°, not foldable – with additional pendulum frame for automatic tailgate opening during tipping operation; locking via galvanized swing bolt locking and central locking system * Deactivation function for automatic rear wall opening when tipping backwards with open door * 4 mm steel floor plate * Rear ramp carrier rail for drive-on ramps ----Load Securing: * 1 x 5 t lashing point in each corner * 4 x 3 t recessed lashing rings per side, fitted in the outer frame ----Ramps: * 1 pair of aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for vehicles on rubber tires & tracks * Lockable storage compartment for ramps under the loading platform, integrated into the chassis ----Paint Finish: * Drawbar, front wall, tipping platform, rear stanchions, underrun protection, and mechanical support legs hot-dip galvanized * Sidewalls and tailgate painted RAL 9010 pure white * Sidewall painting in any RAL color available at extra charge * Axles, springs, flange eye, air tank, and landing gear painted in a black tone ----Information: * Body reinforced with load securing certificate according to EN 12642 XL Bsdpol Thyxjfx Abpjdd * New vehicle without initial registration, with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available ex-works Egestorf on A7

Stanje: rabljeno, največja dovoljena obremenitev: 12.080 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2024, dolžina tovornega prostora: 3.900 mm, širina tovornega prostora: 1.920 mm, višina nakladalnega prostora: 415 mm, Leto izdelave: 2022, Oprema: ABS, * ETM-TA 14.4: ----Brakes: * Wabco ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange towing eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolt-on towing eye ----General attachments: * Jost landing gear at the front * Side underrun protection * Foldable A-panel at the rear ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----Superstructure: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding plate cover 750 x 1,000 mm at the front incl. 2 removable skip stops, front in 2 positions * Rear cross member for attaching aluminium ramps, incl. 2 additional drop-down supports at the rear ----Loading edge: * Unloaded loading edge approx. 710 mm ----Load securing: * 4 removable skip stops, can be inserted into 2 positions for lateral centring of the skips * On each side: 1 x (13.5 t) UVV lashing point for attaching tensioning devices * 2 ratchet tensioners (spindle adjustment) with compensating chain and quick-shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paintwork: * Chassis, front wall, side walls, mudguards, drawbar, rear drop supports hot-dip galvanized * The axles, springs, landing gear, and air tank painted in a black tone ----General information: * Vehicle has a one-day registration in 06/2024, due to missing tyre pressure monitoring system it has not been loaded/used * Subject to errors and prior sale ----Delivery time: Bdjdpfxel Th Eyj Abpsd * Immediately available ex Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 30.740 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift/lowering system and RtR valve * Smard board for load weight determination * Warning sign packages front & rear * Reflective contour marking tapes on sides and rear * Rotating beacon (removable) at rear * LED lights * Straight drawbar with 50 mm towing eye and continuously adjustable height * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, right-hand side * Closed single plastic mudguards at front * Straight rear steel splash guards, each with spray suppression * Side underrun protection * Turntable platform front extension by 520 mm with 45° corners and 3 flush storage compartments with lids, lockable * Chassis made of high-strength fine-grained steel * Decking above turntable platform: 50 mm softwood, in low-bed platform: 60 mm softwood * Outer planks of access ramps: hardwood * Each side features 4 stake pockets (stakes not included), with simultaneous 2 t lashing points * Lashing package includes: 2 lashing rings 6.4 t, front left and right on main frame of turntable platform * On sides, front & rear, 2 pairs of 13.4 t lashing rings on outer frame; sides each with 4 pairs of 10 t lashing rings, pivoting & lowerable Bdedpfx Aol Tphrjbpod * Loadable in all directions, recessed in the outer frame * 2 pairs of 6.4 t lashing rings on the excavator stick rest area * 8 pairs of galvanized folding outriggers for 3 m overall width (not in the rear slope) * Extension planks stored left side in a stowage compartment * Excavator stick rest above rear axle to rear slope approx. 2,100 x 740 x 190 mm * Mechanical drop supports, rear * Hydraulic folding ramps with hydraulic tip section approx. 4,650 x 720 mm including lateral hydraulic ramp shift & load holding valve * Load area over turntable: approx. 2,990 x 2,520 mm * Rear load area: approx. 6,780 x 2,520 mm * Loading height loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm drive-on slope) * Flow divider installed * Chassis, turntable, ramps, outrigger arms, and mechanical rear supports hot-dip galvanized * Axles, drawbar, air reservoir, and turntable painted in a black tone * Tires: 235/75 R 17.5 * New vehicle, not previously registered, with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 14.650 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2024, * RS-T 18.0 / 018: * Wabco EBS-E (electronic brake system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Disc brakes Bsdpfx Asl Tpy Hsbpjdd * Duomatic brake coupling * 2 x 10 t SAF axles * Air suspension with automatic lowering when uncoupling the brake * Drawbar 2,300 mm long with 40 mm towing eye and height adjustment via tension spring & spindle * Plastic toolbox on the right side, closed plastic mudguards * Side impact protection closed on one side, suitable as an advertising surface * Rear underrun protection with 2 buffer stops * Foldable "A"-sign at the rear for waste disposal * LED tail lights with protective housing * 2 x 7-pin power connectors * Chassis hot-dip galvanized (excluding air tanks, axles, drawbar, etc.) * Roller track length approx. 6,950 mm * Roll-off container secured with pneumatic 4-point claw locking system * At the front: 2 plug-in container stops with 2 additional plug-in positions * Unladen ride height approx. 1,165 mm * -- Permissible gross weight of 20,000 kg technically possible -- * Suitable for 5,000 – 7,000 mm container lengths * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf