Kässbohrer 3Achs Tieflader Lenk Saf Hydr. Rampen nakup rabljenega (5.744)

Stanje: novo, največja dovoljena obremenitev: 31.100 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.520 mm, Gross weight: 24,000kg / 40,000kg Curb weight: 8,900kg Payload: 15,100kg / 31,100kg Total length: 11,940mm Loading length: 10,410mm total, 2,490mm gooseneck, 7,920mm loading deck including rear bevel Width: 2,520mm Loading height: 900mm Further information: plus pre-carriage / provision ex stock location 26639 Wiesmoor: €1,280.00 net Steel welded construction Turntable with heavy-duty ball-bearing slewing ring Foldable rear support Wheel chocks with holder Aluminium side underrun protection Rear mudflaps across the full width (not in combination with forklift holder) Half-shell fenders on 1st and 2nd axles with anti-spray mudflaps behind each axle Anti-spray mudflaps in front of and behind 3rd and 4th axles Excavator arm recess over rear axles to the rear, approx. 1,800 mm long, approx. 650 mm wide, approx. 150 mm deep 2 pairs of lashing holes (5 t each) in the excavator recess at the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 storage box embedded in gooseneck floor with lid, W=720 mm / L=520 mm / D=170 mm Extendable width to 3,000 mm (not in rear bevel) (Track width of machines/vehicles to be transported must not exceed outer frame width of 2,550 mm) Storage compartment for timber planks under low-bed platform 70 mm timber for widening to 3,000 mm Low loader lashing eyes 1 pair of lashing cut-outs at the front longitudinal member in gooseneck, each rated 10 t 4 pairs of lashing holes in the outer frame, each 5 t (lashing strap attachment) 9 pairs of recessed lashing mushrooms in the outer frame, top and side, each 10 t 2 x front on gooseneck 7 x in lowered bed First lashing eye 250 mm from the front, last max. 250 mm from the rear, spacing not greater than 1,100 mm 3 pairs of additional folding lashing eyes, each 10 t: 1 x on gooseneck (protrudes) 1 x at beginning of low bed, recessed in longitudinal rails 1 x behind the last axle, recessed in the floor Trailer tow device Drawbar with certified 50 mm towing eye Drawbar height adjustable by spring Axles & suspension Drum brake axles, manufacturer's choice Axles/chassis laser aligned—reduces tire and fuel wear Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (equalisation rocking beams) Wheels and tires 235/75 R 17.5" manufacturer's choice Steel rims in twin configuration, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake 2 foolproof coupling heads at the front with connection leads to tractor unit 24 Volt ABS and ALB, with ABS connector at front, with connecting cable Note: The trailer may only be towed by tractors supporting ABS function! Electrics 12–24 volt, multi-chamber LED lamps, side yellow LED marker lights, LED license plate lights (note: some tractors may show false diagnostics despite correct function) 2 white position lights at the front, LED 2 white/red lane marker lights at the rear, LED 2 x 7-pin foolproof connectors at the front, with connecting cable 1 LED beacon with holder, switched via position light (removable beacon) 2 pairs of warning plates, double LED illuminated and extendable to 3,000mm Floor Gooseneck front with steel/checker plate covering Lredpfx Asrducpop Dsn then approx. 70 mm softwood floor, in the wheel arch area steel/checker plate covering Rear bevel with 70 mm softwood floor A

Stanje: novo, največja dovoljena obremenitev: 31.920 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New vehicle: Fliegl 4-axle low-loader trailer with ramps, model VTS 400 Gross weight: 24,000 kg / 40,000 kg Unladen weight: 8,080 kg Payload: 15,920 kg / 31,920 kg Overall length: 11,940 mm Loading length: total approx. 10,410 mm; neck approx. 2,490 mm; loading bed incl. rear taper approx. 7,920 mm Width: 2,550 mm Loading height: 900 mm Further information: Plus pre-freight / preparation ex stock 26639 Wiesmoor: €1,280.00 / net Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball race ring Foldable rear support 2 wheel chocks with holders Side underrun protection, aluminium Full-width rear mud flap Half-shell mudguards, 1st and 2nd axles with anti-spray flaps behind each axle, Anti-spray flaps in front of and behind 3rd and 4th axles Excavator stick trough over rear axles to the rear, approx. 1,800 mm long, 650 mm wide, 150 mm deep 2 pairs of lashing holes, each 5 t, in the excavator stick trough on the longitudinal frame, approx. 300 mm from the front and 200 mm in front of the rear slope 1 plastic toolbox, w=600 mm / h=425 mm / d=460 mm, lockable Storage box recessed in the neck floor with lid, w=720 mm / l=520 mm / d=170 mm Extendable outriggers to 3,000 mm (not for rear slope) (Track width of construction machinery/vehicles to be transported must not exceed external frame width of 2,550 mm) Storage compartment for wooden planks under the low-bed deck Wooden planks, 70 mm, for extension to 3,000 mm Lashing points, low-loader: 1 pair of lashing cutouts in the front longitudinal beams, embedded in the neck, each 10 t 4 pairs of lashing holes in the outer frame, each 5 t (for attaching ratchet straps) 9 pairs of lashing mushrooms, embedded in and above the outer frame, each 10 t: - 2 × on the neck - 7 × in the low-bed section First lashing point 250 mm from the front, last max. 250 mm from the rear; lashing point spacing max. 1,100 mm Additionally, 3 pairs of folding lashing eyes, each 10 t: - 1 × on the neck (protruding) - 1 × at the start of the low-bed inside the longitudinal beams - 1 × in the floor behind the last axle Drawgear, turntable trailer: Drawbar with certified 50 mm eye Drawbar height adjustment via spring Axles & Suspension: Drum brake axles, per manufacturer’s choice "Axles/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension with lift & lower valve + auto-reset function Wheels and Tyres: 235 / 75 R 17.5", per manufacturer’s choice Steel twin wheels, factory silver Braking system: 2-line air-operated brake system Spring-loaded parking brake Axle load detection via EBS CAN bus signal for display in truck cab (truck must be equipped accordingly; not a calibrated scale) Vehicle stability system: 2 non-interchangeable coupling heads at the front, connection lines to the tractor 12-24V EBS, electronic braking system with EBS socket at the front, including connecting cable (Knorr brand) Attention: The trailer may only be towed by vehicles that guarantee ABS functionality! Electrics: 12-24V, multi-chamber LED lights, side LED marker lights (yellow), LED license plate lighting (Note: Some towing vehicles may display incorrect errors despite proper function) 2 white front position lights, LED 2 white/red rear lane marker lights, LED 2 × 7-pin non-interchangeable sockets at the front, with connection cable 1 LED rotating beacon with bracket, switchable via sidelights (removable beacon) 2 pairs... Lrjdpfx Apoxrx Nlj Den

Stanje: novo, največja dovoljena obremenitev: 30.010 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New vehicle: Fliegl 4-axle low-loader trailer with wheel recesses and split ramps, type VTS 400 RM Lease-purchase offer: Term 48 months, down payment only the VAT, residual value 40% Monthly rate: EUR 899.00 Vehicle / Body: Low-loader Lrsdpfstrizkex Ap Djn First registration: New vehicle Gross weight: 24,000 kg / 40,000 kg Unladen weight: 9,990 kg Payload: 14,010 kg / 30,010 kg Overall length: 12,000 mm Loading length: total approx. 10,000 mm, gooseneck approx. 2,850 mm, load area including rear bevel approx. 7,150 mm Width: 2,550 mm Loading height: 900 mm Further information Low-loader trailer chassis Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear supports Wheel chocks with holders Aluminum side underrun protection Rear spray flap across the entire width Half-shell mudguards on 1st and 2nd axle with anti-spray flaps behind each axle, anti-spray flap behind 4th axle Excavator arm recess above the rear axles, extending to the rear, approx. 1,800 mm long, approx. 650 mm wide, and approx. 150 mm deep 2 pairs of lashing holes (5 t each) in the excavator arm recess, lateral on the main frame approx. 300 mm from the front and approx. 200 mm before the rear bevel Spare wheel carrier for 1 spare wheel, upright on the gooseneck right at the front. Spare wheel, make identical to the main tires, steel rim Storage box recessed in the gooseneck floor with lid; dimensions W = 720 mm / L = 520 mm / D = 170 mm 1st pair of wheel recesses after the gooseneck, recessed in the low-bed lane area, ramped for entry, bottom length approx. 1,600 mm, depth approx. 400 mm. Note: Frame in the main beam area is 400 mm higher than the wheel recess 2nd pair of wheel recesses between the axles, recessed in the low-bed lane area, ramped for entry, bottom length approx. 600 mm, depth approx. 300 mm. Note: Frame in the main beam area is 300 mm higher than the wheel recess Extendable width up to 3,000 mm (not extendable in the rear bevel and not in the lower wheel recesses) (track width of the construction equipment or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden planks below the low-bed area 70 mm wooden planks for extension to 3,000 mm Lashing eyes on the low-loader 1 pair of lashing eyes, recessed in the front of the gooseneck, 5 t each 4 pairs of lashing holes in the outer frame, 5 t each (for lashing straps) 8 pairs of lashing rings, integrated on top and side of outer frame, 10 t each 2 at the front on the gooseneck 6 in the low bed First lashing point 250 mm from the front and last max. 250 mm from the rear, spacing between lashing points not greater than 1,100 mm 5 pairs of stake pockets integrated in the outer frame, inside 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) 1 pair of folding lashing eyes, additionally recessed in the floor, 10 t each 1 inside next to the main frame at the start of the low bed 2 pairs of additional folding lashing eyes, 10 t each 1 on the gooseneck (protrudes over edge) 1 behind last axle, recessed in floor Drawbar coupling / turntable trailer hitch Towing bar with certified 50 mm towing eye, towing eye inclined 8° D-value at least 160 kN Axles & suspension BPW drum brake axles "Axle/chassis laser alignment" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical front axle load equalization (rocker balance) Wheels and tires 235 / 75 R 17.5" Manufacturer's choi

Stanje: rabljeno, največja dovoljena obremenitev: 30.500 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2015, dolžina tovornega prostora: 10.170 mm, širina tovornega prostora: 2.500 mm, skupna širina: 2.520 mm, skupna višina: 3.600 mm, Oprema: ABS, Vroče pocinkano, dolžina nizkega ležišča cca 6520 mm, razširljivo na 3000 mm, višina nakladanja: cca 910 mm, zadnji naklon: 850 mm, visoko ležišče 2800 mm, vlečno oko 50 mm, vdolbina za roko bagra, hidravlične nakladalne rampe stransko pomične (D x Š) mm, 9 x vponk na vsaki strani, 12 x pritrdilnih obročev na vsaki strani, 2 x zložljivi oporni nogi zadaj, spojna glava Duo-Matic, rotacijska opozorilna luč, izvlečne opozorilne table, ABS, EBS, SAF os(i), bobnaste zavore, listnato vzmetenje, vozilo je lahko opremljeno z reklamnimi nalepkami in/ali napisano. Lsdpfx Aoy Trwzsp Dern SI86936 Naša ponudba je načeloma brez nove tehnične preglede (TÜV). Če želite nov tehnični pregled, vam z veseljem pripravimo ponudbo naših partnerskih delavnic! Vozilo je lahko opremljeno z reklamnimi nalepkami in/ali napisano. Veljajo naši splošni dobavni in plačilni pogoji. Z veseljem vam pripravimo ponudbo za financiranje ali leasing tega objekta. Prosimo, kontaktirajte nas!

Stanje: rabljeno, največja dovoljena obremenitev: 14.300 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2020, naslednji pregled (TÜV): 02/2027, dolžina tovornega prostora: 9.800 mm, širina tovornega prostora: 2.520 mm, Oprema: ABS, * ABS Ljdpfxjy T Dh Sj Ap Dorn * Zadnje podpore * BPW ECO-Plus osi * Oranžna opozorilna luč * Aluminijasta platišča * Duomatik zračni priključek ----Nadgradnja: Pocinčan nizkopodestni priklopnik (2500+7300 mm)/Višina nakladanja cca 900 mm, zadaj znižan/Naklonska višina cca 770 mm, jeklen/lesen pod in protidrsna prevleka, razširljiv na 3 m, hidravlične nakladalne rampe (zložljive za nizek nakladalni kot) s protidrsno prevleko, tudi hidravlično bočno pomične, pričvrstitveni obroči Prodaja le pravnim osebam. PRI IZVOZU JE TREBA PLAČATI SAMO NETO CENO!!!! VSE INFORMACIJE SO BREZ JAMSTVA, VKLJUČNO Z OPREMO IN DODATKI. Osnova vseh prodajnih pogodb, računov, predračunov, naročil in prodajnih pogovorov so naši splošni pogoji (glejte impressum).

Stanje: novo, lastna masa: 6.600 kg, največja dovoljena obremenitev: 17.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 6.500 mm, skupna dolžina: 10.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5 (Doppelbereifung), barva: srebrn, vrsta prenosa: mehanski, poraba goriva (mestna vožnja): 1.090 l/100 km, Unladen weight: 6,600 kg, permissible gross weight: 24,000 kg, cargo area length: 6,500 mm. Tyre size: 235/75 R17.5. 1st axle: , 2nd axle: , 3rd axle: . Leaf suspension. 3-axle low-bed trailer with drop-bed DTS-S 300 - Turntable with robust ball bearing ring - Rear supports, foldable - 1 spare wheel carrier for 1 spare wheel, incl. wheel mounting kit - 1 spare wheel, same brand and type as main tyres, steel rim - 1 plastic toolbox - Extendable load width up to 3,000 mm (not in rear slope) - Storage compartment for timber planks in the centre of the low-bed platform - Timber planks, 70 mm, for widening to 3,000 mm Tie-down points on low-bed: - with spring-loaded lifting aid Axles + suspension: - SAF Ljdpetcwkrsfx Ap Dern - Drum brake axles - Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation (rocker compensation) Braking system: - Dual-line compressed air brake system - Spring-loaded parking brake Electrics: - 24 Volt, multi-chamber lights, yellow LED side lights - 1 LED beacon with mounting bracket, controlled via parking light (removable beacon) - 2 pairs of warning boards, double LED illuminated, extendable to 3,000 mm Floor: - Storage box recessed into drive-up angle at the drop bed - Then 70 mm softwood floor, steel/chequer plate covering in wheel arch area - Rear slope with 70 mm softwood floor Ramps: Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, covered with wood - 1 pair of ring lashing eyes recessed front in drop bed, 10 t - 4 pairs of lashing holes in rear area, 5 t each for tensioning strap hooks - 7 pairs of lashing points recessed top and side in outer frame, 10 t each (1 x front in drop bed, 6 x in low bed) - 5 pairs of stanchion pockets recessed in outer frame, inside 70 x 40 mm (convertible to 5 t ring lashing eyes for extra cost) - 2 additional pairs of folding lashing eyes, 10 t each, 1 x front in drop bed, 1 x behind 3rd axle Axles + suspension: - SAF - Drum brake axles - Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation

Stanje: rabljeno, največja dovoljena obremenitev: 30.100 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2000, dolžina tovornega prostora: 10.600 mm, širina tovornega prostora: 2.750 mm, skupna širina: 2.750 mm, Müller Mitteltal TT40 - remorque surbaissée : ---- * Constructeur : Müller Mitteltal * Modèle : TT40 * Première immatriculation : 02 / 2000 * PTAC : 40 000 kg * Poids à vide : 9 900 kg * Charge utile : 30 100 kg * 4 essieux * Dernier essieu autodirecteur * Contrôle technique à prévoir ! * Rampes hydrauliques * Les traverses bois dans le plateau surbaissé ont été remplacées * Contrôle technique à réaliser * Immatriculation allemande * Surface de chargement totale : env. 10,60 mètres * Largeur de chargement : env. 2,75 mètres * Longueur du plateau surbaissé : env. 4,50 mètres * Hauteur de chargement arrière : env. 0,9 mètres * Hauteur de chargement du plateau surbaissé : env. 0,65 mètres * Hauteur de chargement avant (col de cygne) : env. 1,05 mètres * Plus de photos sur demande (WhatsApp Erik) * Prix : 12 900 € HT + 19 % TVA Lrsdpfx Apozaylfs Don ----Pour toute question, veuillez appeler : Erik Kortum : WhatsApp Toutes les informations sont données sans garantie, sous réserve d’erreurs ou de vente préalable.

Stanje: novo, lastna masa: 6.650 kg, največja dovoljena obremenitev: 17.350 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 10.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5 (Doppelbereifung), barva: srebrn, vrsta prenosa: mehanski, poraba goriva (mestna vožnja): 1.090 l/100 km, Unladen weight: 6,650 kg, permissible gross weight: 24,000 kg, tyre size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf suspension, - welded steel construction - bogie with heavy-duty ball bearing turntable - foldable rear support - 1 spare wheel holder for 1 spare wheel, with wheel mounting kit - without spare wheel, - 1 plastic toolbox, with shelf, dimensions 620x360x440 mm (w/h/d), lockable with padlock - extendable outriggers up to 3,000 mm (not at rear bevel) - storage compartment for timber planks underneath the low-bed area - 70 mm timber planks for extension to 3,000 mm - 1 pair of recessed lashing rings at the front in the gooseneck, each rated at 5 t - 7 pairs of lashing mushrooms recessed top and side in the outer frame, each rated at 10 t (1 x front in gooseneck, 6 x in low-bed area) - 5 pairs of stake pockets recessed in the outer frame, internal 70x40 mm - 2 additional pairs of folding lashing rings, each 10 t, 1x front in gooseneck, 1x behind 3rd axle - towing bar with 40 mm towing eye and 8° inclined towing eye - SAF drum brake axles - parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalisation (rocker equalisation) - 235/75 R17.5 - twin steel rims, factory silver - dual-circuit compressed air brake system - spring-loaded parking brake ABS and ALB, with socket at front, including connecting cable - 24 volt, multi-chamber lights, side yellow LED lighting - 2 x 7-pin non-interchangeable connectors at front, with connecting cable - 1 LED beacon with holder, operated via parking light (removable lamp) - 2 pairs of double LED warning panels, extendable up to 3,000 mm - gooseneck with steel/chequer plate covering - storage box recessed in the transition slope to gooseneck - followed by 70 mm softwood floor, steel/chequer plate covering in wheel well area - rear slope with 70 mm softwood floor - low-bed area incl. rear slope 6,500 mm - steel ramps 2,800 mm long, 750 mm wide, laterally adjustable, with timber covering - additional ramp safety device Ledpfeyxh Rzox Ap Dsrn

Stanje: novo, največja dovoljena obremenitev: 16.000 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2024, * KA-TA-RT 21.0 ML ----Brakes: * Without ABS/EBS, approved for 40 km/h * Spring-loaded parking brake * Drum brakes ----Axles: * Gigant axles ----Suspension: * Tandem equalization unit with 100 mm wide parabolic springs Lrodpfx Aor Dpzuop Den ----Drawbar / Drawtube: * Fixed welded drawtube with low-maintenance ball joint for K80 ball coupling (offset by +77 mm / 33 mm via head plate), with raised bracket for connection lines ----Electrics / Lighting: * 12 V, 7 + 4 pin power supply * LED lighting system 12 / 24 V with protective grid * 2 LED work lights at the rear, switchable from towing vehicle without installation on towing side ----General attachments: * Support winch at the front * Mechanical drop-down supports at the rear * Side marker lights with indicator activation * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side * Hot-dip galvanized two-step access ladder in front of the front wall (on FR left) ----Chassis: * Fine-grain steel chassis ----Tipper body: * Steel Pal.- 3-way tipper body with M-Strong side panels (front wall fixed, continuous side panels - without center stanchions - swinging via manual central locking and mechanically foldable with sideboard spring assistor) * Hydraulic tailgate, 500 mm high, functioning as hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor ----Load securing: * 1 x 7-tonne recessed and foldable lashing point in each corner * 4 x 3-tonne recessed and foldable lashing rings on each side ----Ramps: * 1 pair of aluminum drive-on ramps (10 t/pair with axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles * 2 receiving compartments for aluminum drive-on ramps, recessed from behind into the chassis * Load securing according to EN 12642 XL ----Coupling height: * Laden approx. 530 mm & unladen approx. 590 mm ----Paintwork: * Superstructure painted RAL 9010 pure white * Chassis, drawtube, rear supports, underrun protection hot-dip galvanized * Axles, air tank, support winch at the front * K80 coupling painted in black shade ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 16.000 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2024, * KA-TA-RT 21.0 ML ----Braking System: * Without ABS/EBS, homologated for 40 km/h * Spring-loaded parking brake * Drum brakes ----Axles: * Gigant axles ----Suspension: * Tandem-balance unit with 100 mm wide parabolic springs ----Drawbar Eye / Drawbar: * Rigid, welded drawbar with low-maintenance ball joint for K80 ball coupling (adjustable by +77 mm / 33 mm via mounting plate) with elevated gallows for connection lines ----Electrics / Lighting: * 12 V 7 + 4-pin power supply cable * LED lighting system, 12 / 24 V with protective grilles * 2 LED work lights at the rear, switchable from the towing vehicle, no vehicle-side installation required ----General Attachments: * Landing gear at the front * Mechanical drop legs at the rear * Side marker lights with indicator control * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right-hand side * Hot-dip galvanized two-step access steps in front of the bulkhead on the left (FR) ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipper Body: * Steel pallet three-way tipper body with M-Strong side boards (fixed front wall, continuous sides without central stanchions, swinging via manual central locking, plus mechanically folding with board spring lifters) * Hydraulic tailgate, 500 mm high, engineered as a hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor ----Load Securing: * Each corner equipped with 1 x 7 t recessed folding lashing ring * Each side fitted with 4 x 3 t recessed folding lashing points ----Ramps: * 1 pair aluminum loading ramps (10 t/pair for axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber and tracked vehicles * 2 recessed storage compartments for aluminum ramps in the rear of the chassis * Load securing compliant with EN 12642 XL ----Coupling Height: * Loaded approx. 530 mm & unladen approx. 590 mm ----Paintwork: * Bodywork painted in RAL 9010 pure white * Chassis, drawbar, rear support legs, underrun protection hot-dip galvanized * Axles, air tanks, landing gear (front) * K80 coupling painted in black ----Information: Ljdpfor Dpz Hsx Ap Dorn * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex works Egestorf

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 01/1989, Leto izdelave: 1989, Oprema: ABS, = Additional Options and Equipment = - Electronic Braking System (EBS) = Notes = Langendorf 2-axle tandem low-loader with ramps Low-loader trailer 2-axle ID No. 686 We look forward to assisting you with advice, contract signing, or vehicle collection at our dealership. Please book an appointment. If you are unable to visit our dealership in person, we offer complete processing via telephone, email, WhatsApp, or fax. On request, we can deliver your new vehicle directly to your door. This means the best price for you, maximum safety and convenience throughout the transaction. We are happy to accept your used vehicle as a trade-in. We offer digital vehicle valuation using your vehicle photos, even without a dealership visit. Our specialized purchasing team guarantees you the highest possible price. On request, we deliver your new pre-owned vehicle nationwide directly to your doorstep and collect your trade-in vehicle. Financing and leasing options available. Immediate approval and settlement of existing loans. *Your specialized partner for cars, vans, commercial vehicles, and construction machinery* *ITC GmbH & Co KG Siemensstraße 7 32312 Lübbecke (industrial area) Over 400 vehicles in stock at all times. Lrsdpext Tblsfx Ap Djn The details provided in advertisements, on the internet, price tags, and pictures are non-binding descriptions and do not constitute guaranteed properties. The seller accepts no liability or warranty for input or data transmission errors. Listed features must be checked separately where applicable. Offer generally without new TÜV approval; we are happy to make you an offer via our partner workshop. Subject to errors and prior sale. = Further Information = Unladen weight: 1,700 kg Payload: 3,300 kg Gross vehicle weight: 5,500 kg Sales price: €5,999, US$6,988 VAT/margin taxation: VAT deductible

Stanje: rabljeno, največja dovoljena obremenitev: 9.100 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 11/2014, naslednji pregled (TÜV): 05/2026, dolžina tovornega prostora: 7.204 mm, širina tovornega prostora: 2.484 mm, višina nakladalnega prostora: 594 mm, skupna širina: 2.550 mm, skupna višina: 1.500 mm, Oprema: ABS, * Vzpenjalne rampe * Stranske stranice * Višinsko nastavljiva vlečna naprava * Prednja ročna podporna noga * Listnato vzmetenje * BPW osi z bobnastimi zavorami * Dodatne podpore zadaj * Zagozde za kolesa * Sidrišča ob straneh ----* Dimenzija pnevmatik: 235/75R17,5 * Tehnična skupna masa: 11.900 kg * Lastna teža: 2.800 kg * Skupna dolžina: 9.150 mm Lrsdpsy T Dynofx Ap Djn * Tehnični pregled (SP) velja do: 10/2026 ----Številka vozila: 12097----Pridržujemo si pravico do napak in vmesne prodaje----Reklame in različni napisi so bili digitalno odstranjeni.-----Z veseljem vam svetujemo in pomagamo pri vseh formalnostih, ki se pojavijo ob nakupu vozila. Pošljite nam svoje želje in predloge, za vse ostalo bomo poskrbeli mi. Med drugim vam lahko ob doplačilu ponudimo naslednje storitve:----Odkupljanje vašega starega vozila TÜV/SP tehnični pregled Popolna izvedba izvoza Posredovanje financiranja Pridobivanje izvoznih tablic Prevoz vozil Registracija vozil Reševanje in prevoz vozil----?Vaša VTS ekipa

Stanje: novo, največja dovoljena obremenitev: 31.630 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with display option in the truck via EBS signal - no truck-side installation required * Warning sign packages, front and rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon at the rear * 24 V 15-pin as well as additional 12 V 7+4-pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Tool box made of powder-coated sheet steel and spare wheel holder in basket design on right side * Enclosed single plastic mudguards at the front * Straight steel mud flaps at the rear each with splash protection (spray suppression) * Side underrun protection * Extended offset cranking by 500 mm forward * Kingpin platform extension by 520 mm with 45° angled corners and 3 recessed lockable storage compartments with lid * Chassis made from high-strength fine-grained steel * Flooring over turntable platform made of 50 mm and in low-bed platform made of 60 mm softwood Lodpel Th Evjfx Ap Djrn * Outer boards of the drive-on ramps made of 50 mm bamboo wood * Four stake pockets per side (stakes not included) with integrated 2 t lashing point * Load securing package (Lasi package) including: 2 lashing eyes (6.4 t) front left/right on the main frame of the turntable platform; on both sides, front and rear, 1 pair of 13.4 t lashing rings on the outer frame, 4 pairs per side of 10 t swivel and drop lashing rings, loadable in all directions and integrated into the outer frame; 2 pairs of 6.4 t lashing rings per side in the excavator stick tray; 8 pairs of galvanized folding extensions for total width of 3 m (not at the rear angled section) * Side extension planks stored on the left in a compartment * Excavator stick rest above rear axle up to the end of approach slope, approx. 2,300 x 740 x 190 mm * Mechanical drop supports at rear * Hydraulic, hot-dip galvanized drive-on ramps approx. 3,000 x 720 mm * Hydraulic side ramp shifting on sliding tube from ramp axle * Loading area above kingpin: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded platform height approx. 860 mm (incl. 860 mm approach slope) * Chassis, kingpin platform, drive-on ramps, mechanical folding supports at rear hot-dip galvanized * Axles, springs, air tanks, and kingpin painted in black tone * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, lastna masa: 6.600 kg, največja dovoljena obremenitev: 17.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 10.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5 (Doppelbereifung), barva: srebrn, vrsta prenosa: mehanski, poraba goriva (mestna vožnja): 1.090 l/100 km, Unladen weight: 6,600 kg, permissible gross weight: 24,000 kg, tyre size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf suspension, weights: Immediate approval technically possible Gross weight: 24,000 kg, 30,000 kg, payload approx.: 17,400 kg, 23,400 kg; unladen weight approx.: 6,600 kg +/- manufacturing tolerance. Dimensions (approx.): Total length 10,900 mm, total width 2,550 mm, gooseneck length 2,180 mm, low bed platform length incl. rear chamfer 6,500 mm, rear chamfer length 950 mm, frame width 2,520 mm, loaded loading height in low bed 860 mm, coupling height 900 mm, drawbar length 1,900 mm. Equipment: - Extendable width up to 3,000 mm (not in rear chamfer), incl. timber planks - SAF drum brake axles - Parabolic suspension - Drawbar with certified 40 mm towing eye Lrsdpfx Apox Nrp Ne Dsn - Tyres 235/75 R17.5 - Storage box recessed at the transition to the gooseneck - 1 plastic toolbox with shelf, 620 mm wide / 360 mm high / 440 mm deep - Steel ramps: 2,800 mm long, 750 mm wide, laterally adjustable, timber-coated - Ramps with spring assist - Frame hot-dip galvanised Subject to errors and changes.

Stanje: novo, lastna masa: 15.420 kg, največja dovoljena obremenitev: 61.080 kg, skupna masa: 76.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, velikost pnevmatike: 235/75/r17,5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Platform: Extendable loading platform with rear chamfer approx. 500 mm x 8° 8 pairs of flip-out lashing rings 1 pair of recessed lashing rings at the front of the loading area Cutouts in the outer frame for securing straps Approx. 48 mm thick hardwood flooring; checker plate above the axles Two-Part Steel Ramps: One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramps with hydraulically folding ramp sections, hydraulic lifting and hydraulic lateral movement. Max load per pair: 50,000kg. Landing Legs: • JOST landing legs (mechanical) with two-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axle with electromagnetically operated reverse lock, activated by reverse gear and manually Tyres: 235/75 R 17.5 3PMSF Brake System: Ledpsl Sl Izofx Ap Dern Brake system according to EU regulations with EBS-E (4S3M) Sockets and Lighting: Electrical system according to EU standards, 24 Volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets Connections per ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component (2K) zinc-rich primer High-quality single-colour 2K topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel Structure: High-strength fine-grained steel construction Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the front wall 2" king pin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connection panel 2 wheel chocks with holder on the front wall Mounting at the rear of the gooseneck for ALU approach ramps Bracket for beacon at trailer rear Galvanized supports under sloped area of load floor White reflective tape per EU regulations on sides, extension, and red at the rear Electro-hydraulic unit under the rear of loading platform Warning sign brackets including sockets left/right on gooseneck and rear plate Control valves for ramps mounted right side of trailer Mudflap at rear of trailer Manual and documentation on USB stick 3.5" loose king pin supplied On gooseneck: ALU side boards and rear wall, plug-in approx. 2,440 x 400 mm (LxH) Removable rear galvanized stakes (Body length approx. 2,560 mm) 3 pairs WADER container pockets for 1x 20'/30' or 1x 40' container 6 pairs stake pockets for 100 x 50 mm plug-in stakes in outer frame Galvanized extensions, extendable by approx. 230 mm per side Lift axle on front axle, controlled via TEBS E according to actual axle load and current payload Square climbing strips 20 x 20 mm every 200 mm on outer frame chamfer of load floor Checker plate coverings above the king pin and loading area...

Stanje: novo, lastna masa: 15.900 kg, največja dovoljena obremenitev: 63.500 kg, skupna masa: 68.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.700 mm, širina tovornega prostora: 2.740 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75/r17,5, barva: siv, obratovalna teža: 52.100 kg, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimal load bed length, approx. 3,300 mm long, rear with taper approx. 1,000 mm x 10° Technical fifth wheel load: 23,000 kg For tractor units: 6x2, 6x4, and 8x4 Load bed: Extendable load bed, approx. 9,400 mm long with rear taper approx. 500 mm x 10° Lredpfjmfqi Isx Ap Don A recess in the load bed as well as in the tapering section for accommodating the excavator dipper stick, approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking bolt and reinforced locking positions, service lines are protected within the extendable beams and automatically adapt to the respective bed length Axles and Tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool 235/75 R 17.5 3PMSF twin tires Load index 143/141J (144/144F) Two-piece steel ramps: One pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide Hardwood covering Hydraulically folding ramp tips, each ramp hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward Braking system: Braking system by WABCO EBS-E according to EU regulations Sockets and lighting: 24-volt lighting system Full metallization: Complete HRM metallization with ZINACOR 850 for optimal corrosion protection Surface treatment: Entire steel structure automatically blast cleaned with shot blasting after welding Second blasting treatment with corundum for optimal coating adhesion Final painting: 2 coats of 2-component paint in Novagrau, followed by sealing of cavities with special wax Rims in silver-grey Steel construction: Steel construction from high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Plug-in steel front wall, approx. 400 mm high Connection rail for service lines to the tractor unit Spiral cable for supplying the electro-hydraulic unit and/or electric winch between trailer and tractor unit, with plug for the electro-hydraulic unit to control hydraulic operations, except for hydraulic winches Outer beam of gooseneck with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, thereafter approx. every 400 mm One mounting hole in the rear upper area of the outer gooseneck beam for a bolted lashing ring Approx. 40 mm thick hardwood floor on the gooseneck, checker plate floor over the kingpin Guide plate on gooseneck for the fifth wheel plate, approx. 500 mm wide On the load bed, continuous and between the axles intermittent approx. 50 mm thick hardwood floor Load bed locking with conically welded locking profiles every 250 mm, including preload plate Slotted holes for attachable and movable bridging elements: on the fixed section behind the gooseneck at the front of the load bed 1 movable intermediate table for the extension tube with large cross-section Control valves for the hydraulic ramps on the right side of the vehicle Central lubrication system with 1 pump, standard grease according to NLGI-2 Radio remote control for steering operation, in addition to cable remote control, with 2 control lights on the receiver for single-track steering monitoring

Stanje: rabljeno, skupna masa: 47.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2004, naslednji pregled (TÜV): 08/2026, * Müller Mitteltal TS3 nizkopodni polpriklopnik * Prva registracija: 11/2004 * 3 osi * Zračno vzmetenje * Gigant osi * Hidravlične dolge rampe, pomične in zložljive * Razširitve iz 2,50 m na 3,0 m širina nakladalnega prostora * Nakladalna dolžina: 8,50 m pri nakladalni višini 0,85 m * Nakladalna dolžina na vratu: 3,40 m pri nakladalni višini 1,50 m * Podpore * Neto teža: 10.260 kg Lrjdpfsw Tgkbex Ap Den * Tehnično dovoljena skupna masa: 47.000 kg * TÜV veljaven do: 08/2026 * Tehnični pregled do: 02/2026

Stanje: novo, največja dovoljena obremenitev: 58.860 kg, skupna masa: 73.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck: * Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring, approx. 30 mm thick Extendable loading platform: * Extendable loading platform with rear chamfer approx. 500 mm x 8° * 8 pairs of outward-folding lashing rings (LC 10,000 daN) Ljdjy Augwjpfx Ap Dorn * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching tensioning straps (LC 2,000 daN) * Hardwood flooring, approx. 48 mm thick; checker plate flooring over the axles Two-piece steel ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 900 mm, with Super Grip rubber coating * Ramp with hydraulically folding and unfolding ramp sections * Hydraulic lifting mechanism, hydraulically adjustable * Maximum load per pair: 50,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not need to be included in the overall vehicle length of 16,500 mm when in driving position Axles: * BPW axles and suspension, 1st axle with steering, 2nd and 3rd rigid, 4th and 5th axles trailing-steered, air suspension, with raise/lower function, drum brakes * Trailing steering axles with electromagnetic reverse lock, activated via reverse gear or manually * Technical axle load: 12,000 kg each Tyres: * Tyres 235/75 R 17.5 3PMSF – make of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck via standardized EBS interface according to ISO 11992. For correct display, the truck must be capable of receiving and displaying this data Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Brake system: * Wabco brake system in compliance with EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Steel structure: * Steel structure made from high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure automatically shot blasted after welding with a blast wheel system * Second blasting treatment with corundum for optimum adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final paint finish with two coats of 2K topcoat, single color in RAL 3002 carmine red according to RAL system 841GL * Rear section metallized and painted in RAL 9010 (pure white) Including the following additional equipment: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * A spare wheel carrier in front of the front wall * Yellow-red air couplings at the galvanized front connection strip * A bracket for a rotating beacon at the rear of the trailer * Galvanized supports under the chamfered section of the loading platform * Super Grip 2 rubber coati

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 15.900 kg, največja dovoljena obremenitev: 42.100 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, prva registracija: 11/2001, dolžina tovornega prostora: 8.960 mm, širina tovornega prostora: 2.520 mm, skupna dolžina: 12.950 mm, skupna širina: 2.520 mm, skupna višina: 3.800 mm, vzmetenje: hidravlika, velikost pnevmatike: 245/70R17,5, medosna razdalja: 1.360 mm, največja hitrost: 90 km/h, barva: modra, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2001, Oprema: ABS, Nooteboom MCO-73-04V Top trailer from first owner, first registration 21.11.2001, Fully overhauled in 2014, Brakes renewed in 12.2025! 66,000kg total combination weight with 3-axle tractor unit, Gross weight 58,000kg, Fifth wheel load 18,000kg, 1-4 axles: 10,000 / 10,000 / 10,000 / 10,000kg, Unladen weight 15,900kg, Please refer to the technical data sheet for exact dimensions, Lowbed: 8.96m + 5.50m telescopic extension, Hydraulic supports front and rear allow the trailer including up to 30t of payload to be lifted completely—ideal for unloading laterally at a ramp, Hydraulic suspension (enables leveling even with uneven load distribution), First axle liftable, All four axles are steerable, either automatically or via remote control (also in opposite direction), Hydraulic ramps and hydraulically extendable up to 3,000mm, Load platform extendable to 3,000mm, Tyres 245/70R17.5 – 1st axle: 6/6/6/6mm, 2nd: 11/11/8/8mm, 3rd: 9/9/7/7mm, 4th: 11/11/7/5mm, Spare: 6mm, More details upon request. Sale only to business customers or for export. Leasing/financing available upon request – immediate processing possible, also without down payment! Further details and requirements on request. Vehicle description is for general identification purposes. All information, images and descriptions are non-binding. Equipment must be verified separately if necessary. The seller accepts no liability for typing or data transmission errors. Errors and prior sale reserved. Thank you very much for your interest! We look forward to your visit. Our SERVICE Lredpfx Apeyqm I Uj Don We are happy to take your used vehicle in part-exchange, 30-day export license plate incl. insurance, EUR-1 and all customs documents for export, TÜV / SP / UVV / tachograph inspection / OBU installation, Professional transportation to your location, Transfer from Stuttgart Airport / Sindelfingen station to us by arrangement, Retrofitting with additional components and other individual customer requests possible upon request.

Stanje: rabljeno, prva registracija: 01/1989, barva: rdeča, Leto izdelave: 1989, Oprema: ABS, Langendorf 2-axle Lodpfx Asxxkrrjp Dern Low loader with ramps ABS Tyres 60% GR 10.5-20 10PR IDNR 686 We look forward to advising you, signing the contract or handing over the vehicle at our dealership. Please arrange an appointment. If you are unable to visit us in person, we offer full processing via phone, email, WhatsApp or fax. On request, we can deliver your new vehicle directly to your door. This means you benefit from the best price as well as maximum safety and convenience when making your purchase. We are happy to accept your used vehicle as part exchange. We offer digital vehicle valuation based on photos of your vehicle without requiring a visit to our dealership. Our specialised purchasing team guarantees you the highest price. On request, we can deliver your new pre-owned vehicle nationwide directly to your doorstep and collect your old vehicle—trade-in, financing, or leasing options available. Instant approval and old loan settlement possible. Your specialist partner for cars, vans, commercial vehicles, and construction machinery. ITC GmbH & Co KG Siemensstraße 7 32312 Lübbecke (Industrial Estate) Over 400 vehicles always in stock. All information provided in advertisements, on the internet, price tags and images are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability/warranty for typographical or transmission errors. Listed features may need to be checked separately. All offers are generally without new TÜV inspection; we are happy to provide you with an offer for a new inspection via our partner workshop. Subject to errors and prior sale. = Further information = Unladen weight: 1,700 kg Payload: 3,300 kg Gross vehicle weight: 5,500 kg VAT/margin scheme: VAT deductible.

Stanje: rabljeno, skupna masa: 37.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/2018, naslednji pregled (TÜV): 07/2026, Leto izdelave: 2018, Oprema: ABS, * Doll Fahrzeugbau 2-osno nizkopodna prikolica za gozdarske stroje, tip T2H-0L * Zračno vzmetenje * Hidravlično vodene osi * Daljinsko upravljanje * Skupna dolžina 16,70 m Ljdpfeyxb Tvex Ap Dsrn * Dolžina nizkega podna 9,50 m * Širina 2,55 m * Skupna teža 37.000 kg (tehnično možno 39.000 kg) * Lastna teža 10.360 kg * Možna nosilnost 27.640 kg * Pnevmatična velikost 235/75 R17,5 * Dvojna montaža * Rampe * BPW osi Tehnični pregled/SP do 01/2027

Stanje: rabljeno, največja dovoljena obremenitev: 22.580 kg, skupna masa: 30.000 kg, konfiguracija osi: 2 osi, prva registracija: 11/2022, naslednji pregled (TÜV): 11/2026, dolžina tovornega prostora: 11.025 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 2.725 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2022, Oprema: ABS, KÄSSBOHRER 2-axle city box semi-trailer with tail lift Ledpfxezfxadj Ap Dsrn First registration: 11/2022 German registration, one-owner vehicle Internal dimensions (LxWxH): 11,025 x 2,490 x 2,725 mm Through-loading height: 2,675 mm Unladen weight: 7,420 kg Payload: 22,580 kg Fifth wheel height: 1,150 mm BPW axles with large 430 mm disc brakes 2nd axle with forced steering (TRIDEC system) Tyres: 4 x 385/55 R 22.5 with 10 mm tread depth ALCOA Dura-Bright polished aluminium rims WABCO trailer EBS with RSS stability program Air suspension with raising/lowering function JOST crank landing gear, full-load capacity Body: Load securing certificate Code XL Steel front wall, KTL-coated Side walls of plywood 30 mm phenolic resin floor, max. forklift axle load: 7,200 kg Steel wear plate (600 mm) at rear Steel rear portal frame Flush-fitted doors (fully swing-open) with door holders, 4 double-joint hinges per door leaf, and 2 internal stainless steel locking bars per leaf White GRP roof with 4 integrated LED lamps 2 load securing rails right and left, mounted on side walls Underride liftgate DHOLLANDIA DHSMR30, lifting capacity 2,500 kg, platform length 1,700 mm, with 2 roll stops BDL lock RENTING is the new BUYING – available immediately also with full-service rental

Stanje: rabljeno, največja dovoljena obremenitev: 30.850 kg, skupna masa: 35.500 kg, konfiguracija osi: 3 osi, prva registracija: 07/2017, prostornina tovornega prostora: 35 m³, Oprema: ABS, Kässbohrer silos za cement 35.000 litrov 3 osi, zračno vzmetenje, pnevmatska ograja, BPW osi, kolutne zavore, ABS. Lsdsxthh Hspfx Ap Dorn Lastna masa: 4.650 kg Nosilnost: 30.850 kg

Stanje: novo, največja dovoljena obremenitev: 36.565 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.550 mm, skupna širina: 2.550 mm, skupna višina: 1.040 mm, Leto izdelave: 2026, Oprema: ABS, Brand-new Kässbohrer SPS Mega Heavy-Duty Platform Semi-Trailer – Immediately Available! Technical Data: * Fifth-wheel height: 950 mm * Platform length: 13,550 mm * Gooseneck: 120 mm * Platform height: 1,040 mm * Wheelbase: 7,700 mm * Axle spacing: 1,360 mm * Overall width: 2,550 mm * Gross vehicle weight rating [80 km/h]: 45,000 kg * Gross vehicle weight rating [60 km/h]: 46,000 kg * Unladen weight: 7,827 kg Chassis: * BPW axles with air suspension and disc brakes * Air suspension with load gauge * 1st axle liftable * Wabco braking system * Tyres: 445/45 R 19.5 Frame: * Chassis manufactured from high-grade S700 MC steel, compliant with ISO 1726 * 30 mm hardwood floor with 2 mm Omega-profile reinforcement * 8x2 units of side extensions, adjustable up to 300 mm * Landing gear at the front, foldable supports at the rear Ramp: Lrsdpfx Ajrukt Rop Den * Ramp mounts at the rear of the vehicle * Rear ramp storage box Load securing: * Lashing rings * Stake pockets * 6 x 2 pcs. container lock pockets (suitable for 1x20 ft, 2x20 ft, 1x40 ft containers) + 2 x 2 pcs. container locks * Steel front wall, 1,500 mm high, with Code XL certificate Accessories: * 1x stainless steel toolbox * Stake storage box Chassis colour: RAL 3020 Traffic Red For further information, please do not hesitate to contact us.

Stanje: novo, največja dovoljena obremenitev: 36.565 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.550 mm, skupna širina: 2.550 mm, skupna višina: 1.040 mm, Leto izdelave: 2025, Oprema: ABS, Brand-new Kässbohrer SPS Mega Heavy Duty Platform Semi-Trailer Immediately Available! Technical Specifications: * Fifth wheel height: 950 mm * Platform length: 13,550 mm * Gooseneck: 120 mm * Platform height: 1,040 mm * Wheelbase: 7,700 mm * Axle spacing: 1,360 mm * Overall width: 2,550 mm * Technical Gross Weight [80 km/h]: 45,000 kg * Technical Gross Weight [60 km/h]: 46,000 kg * Unladen weight: 7,827 kg Chassis: * BPW axles with air suspension and disc brakes * Air suspension with load gauge * 1st axle liftable * 3rd axle as trailing steering axle * Wabco braking system * Tyres: 445/45/R 19.5 Frame: * Chassis made of high-quality, high-strength S700 MC steel according to ISO 1726 * 2 mm omega-profile reinforced 30 mm hardwood floor * 8x2 units of side extensions, extendable up to 300 mm * Landing gear at the front, folding supports at the rear Ramp: * Ramp receptacles at the rear of the vehicle * Ramp storage box at the rear Load Securing: * Lashing rings * Stake pockets * 6 x 2 units container locking pockets (suitable for 1x20 ft., 2x20 ft., 1x40 ft. containers) + 2 x 2 units container locks * Front bulkhead made of steel, height 1,500 mm, with Code-XL certificate Accessories: * 1x stainless steel toolbox * Stake box Chassis color: RAL 3020 Traffic Red Please feel free to contact us for further information. Lredsrukucjpfx Ap Don