Faymonville Max Trailer 3-Achs-Semi-Nachlaufgelenkt nakup rabljenega (52.736)

Stanje: novo, največja dovoljena obremenitev: 51.780 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our entire range of vehicles, including those available immediately or at short notice, can be found on our website. Excerpt from the specification. Full specification available on request. GOOSENECK: * Gooseneck in SNT design for optimization of loading platform length, approx. 3,700 mm long, rear with bevel approx. 1,000 mm x 10° * Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 * Plug-in steel front wall, approx. 400 mm high Dodeyhkrljpfx Al Hekl * ASPÖCK-UNIBOX at the front control panel with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * One mounting hole in the rear upper section of the gooseneck outer beams for a bolt-on lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * On the gooseneck: 1 pair of plug-in side aluminium drop sides, approx. 400 mm high, anodized finish * On the gooseneck: plug-in aluminium tailboard, approx. 400 mm high, anodized finish * Approx. 40 mm hardwood floor covering on the gooseneck * 2-inch king pin * One crosswise stake pocket rail fitted in the deck of the gooseneck before the bevel, for plug-in stakes, approx. 100 x 50 mm LOADING PLATFORM: * Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° * Recess in loading platform and bevel to accommodate excavator stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd and 4th axle steering * 3rd and 4th axles with electro-magnetic reversing lock, activated by reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Mechanical landing gear with 2-speed gearbox and crank * Continuous hardwood floor covering on loading platform and between axles (approx. 50 mm thick), increases friction coefficient * 1 intermediate table with a recessed loading area, approx. 300 mm wide, for the large cross-section sliding tube with sheet metal covering * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 6 pairs of recessed, fold-out lashing rings in the loading platform's outer frame (LC 10,000 daN) * Additionally, 1 pair of lashing rings on the outside of the front cross member, turned approx. 90° inward towards the loading area (LC 10,000 daN) * Extendable galvanized widenings, approx. 230 mm per side (without wooden planks) * 1 pair of fixed wheel recesses open to the extension, approx. 700 x 410 mm (W x D) in the loading platform in front of the 1st axle * Between 2nd and 3rd axle: 1 pair fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D) * 1 pair mechanical rear supports * 245/70 R 17.5 3PMSF twin tires – brand of our choice HYDRAULIC LOADING RAMPS: * DR-15/60-900-4350-HB-HV-M * One pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide * Hardwood flooring, hydraulically foldable ramp tips * Ramps hydraulically movable by approx. 235 mm outwards and approx. 215 mm inwards, individually * Hardwood flooring on the loading platform’s bevel * Ramp with hardwood flooring BRAKING SYSTEM: * WABCO EBS-E braking system compliant with EU regulations SURFACE TREATMENT: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% a

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 12.900 kg, skupna masa: 49.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2022, Leto izdelave: 2022, Faymonville 2-axle lowbed semi-trailer MEGAMAX 2x12 t PA 2 steered axles Single-extendable, 2 x 12 t pendle axles Overall length: approx. 13,500 mm Overall width: approx. 2,550 mm Neck width: approx. 2,480 mm Load bed width: approx. 2,550 mm Chassis width: approx. 2,550 mm Technically extendable: approx. 4,700 mm Coupling height (loaded): approx. 1,205 mm Loading height (max. loaded): approx. 1,005 mm Load area length: approx. 6,850 mm Chassis length: approx. 2,600 mm King pin distance to front: approx. 1,200 mm Swing radius of tractor unit (rear): approx. 2,300 mm Swing radius (front): approx. 1,800 mm Axle spacings: approx. 1,360 mm Gooseneck: - Gooseneck in SNT design for optimized load floor length, length approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth-wheel load: 25,000 kg Boiler deck: - Deep-designed extendable boiler deck "SUPER LOW" design - Length approx. 6,850 mm, with mechanical locking system Rear chassis: - Rear chassis with closed outer frame, chequer plate and continuous prism digger recess, approx. 1,250/700 x 505 mm, open at the rear - PENDLE-AXLE, all axles hydro-mechanically forced-steered - Burst hose valve on axle compensation cylinder with automated RESET function - Hydraulic cylinders with shut-off cocks and front pins to secure lifted position - Technical axle load: 12,000 kg each - Hydraulic axle levelling Brake system: - WABCO brake system, EBS-E according to regulations Chassis tyres: - 245/70 R 17.5 3PMS Metalizing: - Complete HRM metallization (High Resistance Metallisation) - Entire steel structure shot-blasted, then hot-finished with ZINACOR 850 (Zinc 85%, Alu 15%) Painting: - 6-coat final treatment - Entire steel structure shot-blasted after welding. One layer of zinc-based primer, one adhesion primer. Final coat with 2 layers of 2K lacquer (acrylic) in a single colour, followed by cavity sealing with special wax - Trailer colour: RAL 3002 Carmine Red - Rim colour: Silver Grey - Side board colour: Natural Aluminum Steel structure: - Steel structure made of high-strength fine-grained steels. Dsdpfey Hxd Ijx Al Hokl - Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690Q/S700MC (yield strength 690MPa) - MAG welding process according to EN ISO 4063

Stanje: novo, največja dovoljena obremenitev: 34.500 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.540 mm, skupna višina: 350 mm, Oprema: ABS, MAX Trailer Type 510 NEW | Hydraulic Pendle Axle – extendable | 34t payload | 2 axles | from €136,900 New vehicle – can be customized to your specific field of application. High payload with robust construction for maximum cost-efficiency. ----Technical Highlights • Hydraulically liftable and lowerable gooseneck with approx. 23,000 kg fifth wheel load • SUPER LOW low bed trailer, extendable, with approx. 40 mm hardwood flooring • Hydraulically forced-steered pendle axles with axle equalization • Rear axle steering conveniently controlled via cable remote • Heavy-duty lashing points for professional cargo securing • Continuous excavator trough for versatile transport tasks ----Chassis & Safety • WABCO EBS brake system in accordance with EU regulations • Tire Pressure Monitoring System (TPMS) • 245/70 R17.5 tires • LED lighting system Short. Strong. Ready. ----Construction & Durability • High-strength fine-grain steel construction • Metallized vehicle chassis with premium corrosion protection • Multi-layer paint system for extended service life • Cavity sealing with special wax ----Included Options • Galvanized front wall + spare wheel • Electro-hydraulic unit • Preparation for 20'/40' container transport • Load gauge incl. load diagram • Central lubrication system BEKAMAX • Extendable warning panels with LED • Beacon holder ----Other equipment and individual adaptations available at any time – we configure your vehicle exactly to your requirements. Dksdpfx Aoypa Ifjl Hol Sample photo. Equipment may vary according to configuration.

Stanje: novo, največja dovoljena obremenitev: 36.410 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including vehicles available immediately or at short notice, can be found on our website. Excerpt from the equipment. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design to optimize load bed length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front bulkhead, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electric-hydraulic unit for hydraulic operations, excluding hydraulic winches * Approx. 40 mm thick hardwood cover above the gooseneck * 2-inch kingpin * Guide plate from the gooseneck for the fifth-wheel plate, approx. 500 mm wide * Receptacle at the rear of the gooseneck for aluminum drive-on ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the bulkhead * 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inner chassis rail) EQUIPMENT: * Load bed approx. 8,800 mm long, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * Recess in the load bed including the rear slope to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, with protected supply lines inside the extendable beams, automatically adapting to the respective load bed length * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steering-following * 3rd axle with electromagnetic reverse lock, activating via reverse gear or manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires. Make at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous and between-axle interrupted approx. 50 mm hardwood planking on load bed (increasing coefficient of friction) Dedpfxjy Auh Is Al Hskl * 1 cross table, approx. 300 mm wide, for the extendable tube with large cross-section; cross table with offset load bed and extendable mounting rails for aluminum bridging elements * Load bed locking with conically welded locking profiles every approx. 250 mm, including pretensioning plate * 1 pair of lashing rings on front crossbeam (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck crossbeam, approx. 700 x 410 mm (W x D) * Wheel recesses with approx. 15 x 15 mm square climbing strips and widened sections at the lower area (if vehicle is fitted with extendable widenings) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load bed between 1st and 2nd axle * Wheel recesses with approx. 15 x 15 mm square climbing strips and widenings in lower area * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, can also be used as widening planks (if vehicle is fitted with extendable widenings) * Aluminum elements lockable on the extension beams of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasted and painted in single color according to RAL code

Stanje: novo, največja dovoljena obremenitev: 36.590 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including units available immediately and at short notice, on our website. Excerpt from equipment specifications. Complete equipment list available on request. Neck: * Gooseneck with front corners chamfered approx. 45° and rear bevel approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Area: * Extendable loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of fold-out external lashing rings (LC 5,000 daN) * 3 pairs of fold-out external lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Cut-outs in the external frame of the loading area for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate over the axles Tyres: * Tyres 245/70 R 17.5 3PMSF – brand at our discretion. Load index (146/146F) TPMS: * TPMS tyre pressure monitoring system compliant with ECE R 141. Data transfer to the tractor unit via the standardised EBS interface according to ISO 11992. For correct display, the tractor unit must support receiving and displaying this data. Landing Legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, all axles hydromechanically forced-steered * Technical axle load: 12,000 kg per axle * Air suspension with lifting / lowering valve * Axle tool Dedpey Auifofx Al Hekl Brake System: * WABCO brake system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Steel Construction: * Steel structure made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical System: * Electrical system according to EU regulations, 24V lighting ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX at the front connection rail with sockets 24N, 24S & 15 pin. Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure is automatically shot-blasted with a centrifugal blasting machine after welding * Second sandblasting with corundum for optimal adhesion of the coating system * Final paint with 2 coats of 2K topcoat, single colour in RAL 3002 carmine red, according to RAL system 841GL * Rims in silver grey * Rear section metallised and painted in RAL 9010 (pure white) Accessories: * 2-inch king pin * One galvanised steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanised front connection rail * Spare wheel holder in front of the front wall (without spare wheel) * Electro-hydraulic power pack * Remote steering front and rear via cable remote control using push buttons, with single-track monitoring of the axles (without installation in the tractor unit) * Mounting rail for aluminium ramps at the gooseneck with integrated collision protection * Gooseneck and rear plate each fitted left and right with a bracket for warning boards incl. socket * Bracket for a rotating beacon at the rear of the trailer * Galvanised folding supports beneath the loading area’s rear bevel * 1 pair of recessed lashing rings along the central beam at the rear in the bevel (LC 10,000 daN) * Load gauge for determining axle loads including load diagram * Sanded coating applied to the checker plates on the gooseneck and loading area for slip resistance * Gooseneck fitted with plug-in aluminium side and rear panels, approx. 2,440 x 400

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 6.640 kg, skupna masa: 40.000 kg, prva registracija: 02/2023, dolžina tovornega prostora: 13.510 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 445/45 R 19,5, barva: siv, Leto izdelave: 2023, 3-axle Mega Flatbed Semi-Trailer HeavyTrailer Gross weight: approx. 40,000 kg Fifth-wheel load: approx. 16,000 kg Axle load: approx. 24,000 kg Unladen weight: 6,640 kg Payload: 33,360 kg Length: 13,510 mm Vehicle width: 2,540 mm Coupling height: approx. 980 mm / 1,100 mm Loading height (unladen): 1,080 mm / 1,200 mm Chassis - Chassis frame construction made of welded longitudinal beams and continuous cross members - Wide underrun neck approx. 700 mm - 6 pairs of lashing rings (2,000 kg lashing capacity), welded into outer frame - 6 pairs of stake pockets (80 x 50 mm) in outer frame - 6 pairs of stake pockets (80 x 50 mm) inside on the longitudinal beam - 2 pairs of ferry lashings, painted yellow - 6 pairs of lashing rings (5,000 kg lashing capacity), welded into outer frame - Front wall approx. 2,000 mm high, with sheet metal cladding, bolted design - Large, edged premium rear lamp panel - Rear underrun protection, welded version (rectangular tube) - Side underrun protection, both sides Support Legs - 24 t telescopic landing gear, single-sided operation, half-moon with base plate Axles/Suspension - 3 axles à 8 t (technically 9 t), disc brakes - Second ride height: Button for 2nd ride height at bracket for raising and lowering (+ approx. 120 mm) - Air suspension, total stroke approx. 300 mm - Lifting and lowering device with 1 rotary slide valve - Holder for lifting/lowering device, bolted version - 6 tyres 445/45 R 19.5 - Wheel mounting via center centering Brakes - Dual-circuit compressed air brake system according to EC Directive 71/320 Dkodjv Darpopfx Al Hol - With double eyelet valve for brake and spring brake - Test nipple for brake cylinder pressure at front right brake cylinder - Each coupling button red and yellow - Lifting/lowering device mounted at rear left in direction of travel - 2 x approx. 80 l air tanks in steel, painted black (1x brake, 1x lifting/lowering) Lighting System - Lighting system 24 Volt with large multifunction lights - Side marker lights (LED) with reflector - Front position lights, lower, white, one each on left and right - 15-pin plug and socket at front - EBS socket - License plate lighting Floor - 28 mm hardwood floor with galvanized omega steel profiles - Hardwood floor screwed onto the cross members - Omega profiles bolted to head frame Painting - KTL with zinc phosphating plus powder coating - Chassis + front wall: MB 7350 novagrau Accessories - Contour marking for flatbed vehicles - Front wall up to 2,000 mm high, with sheet metal cladding, plug-in type - Bracket for rotating beacon at rear - SmartBoard - ECE marking plate at rear - 4x warning signs, extendable - Access ladder rear right, foldable and extendable at rear - 2x wheel chocks with holder - 2 rubber bumpers at rear corners - Mud flaps at rear - Plastic fenders with anti-spray mud flaps - 4 pairs of container locks with retractable twistlocks, recessed into the floor, including additional cross members - Suitable for accommodating 1x40' and 2x20' containers - Open mesh box longitudinally in direction of travel (600 x 450 x 2,670 mm), galvanized, bolted

Stanje: novo, največja dovoljena obremenitev: 48.300 kg, skupna masa: 71.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including vehicles available immediately and at short notice, can be found on our website. Below is an excerpt from the equipment list. Full specification available upon request. GOOSENECK: * Gooseneck with integrated single-axle running gear (pendulum axle) in a detachable version * Gooseneck hydraulically liftable and lowerable, including hydraulic connection linked to the hydraulic axle compensation of the first axles * Length: approx. 5,200 mm, with front tapering approx. 60° * Fifth wheel load according to data sheet: W25-DSR2700-12/22.7 * For tractor units: 6 x 4 or 8 x 4 * Steel front wall, plug-in type, approx. 400 mm high, with beveled design * 1 pair of mechanical supports at the front of the gooseneck * ASPÖCK-UNIBOX on the front connector panel with 24N, 24S & 15-pin sockets * 1 spare wheel holder inside the front wall of the gooseneck with jib * 2 pairs of recessed lashing rings on the gooseneck (LC 2,500 daN) * 2 pairs of recessed lashing rings on the outer frame of the running gear at the front, foldable outward (LC 10,000 daN) * 1 pair of lashing rings at the transition from running gear to loading platform (LC 10,600 daN) * On the gooseneck 1 pair of removable aluminum drop sides, approx. 400 mm high, anodized * On the gooseneck 1 removable aluminum rear wall, approx. 400 mm high, anodized * 3.5 inch kingpin * TPMS tire pressure monitoring system according to ECE R 141 * Round NATO socket on the front connector panel (Maeler & Kaege VG 96 917) * 1 stainless steel toolbox with 1 lid, mounted on the gooseneck on the right in the direction of travel by the aluminum drop side, approx. 1,350 x 400 x 400 mm (L x W x H) LOADING PLATFORM: * Low-bed with external beams, designed as a telescopic loading platform in low-profile design with front extension including fixed approx. 50 mm thick hardwood floor * Length x width approx. 8,000 mm x 2,740 mm * Mechanical bolt-lug coupling from low-bed to running gear for swapping the loading platform or installing extension beams * One locking position approx. every 500 mm on the extension * 4 pairs of recessed lashing rings fitted flat in the loading platform along the outer frame/external beams (LC 10,000 daN) * 1 lashing ring each on the left and right outer rear cross member (LC 10,000 daN) * Foldable extensions, approx. 230 mm per side (WITHOUT wooden boards) * Loose extension planks, steel-rimmed * Preparation for installation of bolted container positions for 1x 20’ or 1x 40’ container on the outer beams. Without container locks * 6 pairs of threaded blocks between the lashing rings under the top chord of the outer beam for mounting bolted M24 rings (LC 8,000 daN) * 2 pairs M24 bolt rings (LC 8,000 daN) included REAR RUNNING GEAR: * Rear running gear with closed outer frame, checker plate decking and continuous prism-shaped excavator trough, approx. 1,450 x 900 x 505 mm, open at the rear * PENDULUM AXLE, all axles hydro-mechanically forced-steered * Hose rupture valve on axle compensation cylinder with automatic reset function Dedpfxeyhkqns Al Hokl * Hydraulic cylinders with shut-off valves and foreplugs to secure in raised position * Final paint of axles in 2 layers of 2-component paint, single color, DB 7350 Novagrau * Technical axle load: 12,000 kg each * Hydraulic axle compensation * 245/70 R 17.5 3PMSF, brand at our choice * Remote steering from front and rear via cable control, with axle alignment check, no installation in the tractor unit * 4 pairs of hanging la

Stanje: rabljeno, največja dovoljena obremenitev: 40.800 kg, skupna masa: 53.800 kg, konfiguracija osi: 3 osi, prva registracija: 11/2012, naslednji pregled (TÜV): 11/2025, Oprema: ABS, Faymonville 4-osovinski Multimax STN-4AX niskopodni teleskopski poluprikolica Godina proizvodnje: 11.2012 Tara: 13.000 kg Dozvoljena ukupna masa: 53.800 kg Tehnički dozvoljena masa: 55.400 kg Nosivost: 40.800 kg Podpritisna sila: 25.000 kg Dimenzije guma: 205.65R17,5 3. i 4. osovina – prinudno upravljane 4x SAF osovine 7.600 kg sa vazdušnim ogibljenjem Dužina: 13.475 mm do 20.275 mm (izvlačiva) Širina: 2540 mm do 2620 mm Visina: 1200 mm ! Dodatne informacije na zahtev putem e-maila ! Podaci su informativni i bez garancije na tačnost! Informacije dostupne na internetu su neobavezujući opisi i ne predstavljaju zagarantovane karakteristike. Prodavac ne odgovara za greške, tipografske greške ili greške u prenosu podataka. Zadržavamo pravo na izmene. Stalan otkup i prodaja, kao i zamena i iznajmljivanje Dedpfx Aou Aynlol Hekl dizalica i podiznih vozila, kao i građevinskih i teških vozila.

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually Dodergzv Nopfx Al Hokl * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Stanje: novo, največja dovoljena obremenitev: 50.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment specification. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. length 3,700 mm, with rear bevel of approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * 1 pair of detachable ALU side walls, approx. 400 mm high, anodized finish * 1 detachable ALU rear wall, approx. 400 mm high, anodized finish * Over the gooseneck, approx. 40 mm thick hardwood flooring, over the king pin with checker plate covering Dksdpfx Aletx Nwns Hsl * 2-inch king pin * Mount at the rear of the gooseneck for ALU drive-on ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. length 8,800 mm, with rear bevel approx. 500 mm x 10° * Recess in platform and rear bevel for accommodating an excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st axle self-steering, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reversing lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg * Platform with continuous and between-axles interrupted 50 mm thick hardwood flooring (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanized side extensions by approx. 230 mm each side (without wooden planks) * Wheel wells with square climbing strips, approx. 15 x 15 mm in front of the axles, continuous opening up to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel wells with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with single-track monitoring of the axles, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. length 4,350 mm and width approx. 900 mm * Hydraulically folding ramp tips * Ramps hydraulically adjustable individually by approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber surface approx. 25 mm and steel surface approx. 5 mm as additional

Stanje: rabljeno, največja dovoljena obremenitev: 51.870 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2025, naslednji pregled (TÜV): 03/2026, skupna širina: 2.540 mm, Oprema: ABS, Our complete stock of vehicles, including those available immediately and at short notice, can be found on our website. Extract from the equipment. Full equipment details available upon request. GOOSENECK - Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with 1,000 mm x 10° bevel - Suitable for tractor units: 4x2, 6x2, and 6x4 - Removable steel front wall, approx. 400 mm high - Yellow-red air couplings on the front connector strip - ASPÖCK UNIBOX on the front connector strip with 24N, 24S, & 15-pin sockets - 3 kW electro-hydraulic unit for hydraulic control - Outer beams of the gooseneck with mounting holes for bolt-on lashing rings - One mounting hole at the upper rear of the gooseneck outer beams for a bolt-on lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - On the gooseneck, 1 pair of plug-in aluminum sideboards, approx. 400 mm high, anodized finish - On the gooseneck, one plug-in aluminum rear board, approx. 400 mm high, anodized finish - Approx. 40 mm thick hardwood flooring above the gooseneck - 2-inch kingpin - Gooseneck guide plate for fifth wheel, approx. 500 mm wide - Rear mount on gooseneck for aluminum drive-on ramps - Round NATO socket at the front connector strip (Maeler & Kaege VG 96 917) LOADING PLATFORM - Extendable loading platform, approx. 8,800 mm long, rear with 500 mm x 10° bevel - Recess in the loading platform and the bevel to accommodate excavator dipper arm, approx. 2,490 x 750 x 210/290 mm (L x W x H) - TPMS tire pressure monitoring system according to ECE R 141 - BPW axles and suspension - 1st and 2nd axles fixed, 3rd and 4th axles steering trailing axles Dsdsxtc Uhspfx Al Hekl - 3rd and 4th axles with electro-magnetic reverse lock, activating via reverse gear and manually - Technical axle load: 12,000 kg each - Air suspension with raising/lowering valve - 235/75 R 17.5 3PMSF twin tires - Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load: approx. 50,000 kg - Continuous and inter-axle interrupted approx. 50 mm thick hardwood flooring on the loading platform (increased friction coefficient) - Loading platform locking using conically welded locking profiles every approx. 250 mm - Slotted holes for attachable and repositionable bridging elements at the front of the platform - Intermediate platform with offset surface, approx. 300 mm wide, for the large cross-section sliding tube with sheet covering – front and rear with slotted holes for attachable and repositionable bridging elements – removable panel flush with the loading platform - 1 pair of lashing rings on the front cross member (LC 10,000 daN) - 6 pairs of recessed lashing rings in the outer frame, foldable outwards (LC 10,000 daN) - Additionally, 1 pair of external lashing rings on the front cross member, rotated approx. 90° inwards to the platform (LC 10,000 daN) - Extendable (galvanized) extensions, approx. 230 mm per side - 1 pair of fixed wheel recesses open up to the extension, approx. 700 x 410 mm (W x D), in the platform before the 1st axle, wheel recesses with sheet covering and square climbing strips of approx. 15 x 15 mm, each approx. 200 mm - Between 2nd and 3rd axles in the platform, 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D); covers for wheel recesses split lengthwise, with wood overlay, external plug-in mounting

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, barva: modra, Leto izdelave: 2019, Oprema: ABS, = Additional Options and Accessories = - Steering axle - Air suspension = Further Information = Year of manufacture: 2019 Rear axle 1: Twin tires; Steered Rear axle 2: Twin tires; Steered Rear axle 3: Twin tires; Lift axle; Steered Technical condition: Very good Visual condition: Very good Price: On request ROJO TRAILER KT3 ST EXTENDABLE SEMI LOWLOADER 3x SAF hydraulic steering axles Last axle is liftable Radio remote control Dksdpfx Aljuxxc Tj Hel Air suspension Tyre size 245/70/R17.5 Gooseneck length 308 cm Extendable loading platform Loading platform length 678 cm + 300 cm extendable, total loading platform length 978 cm Loading platform width 254 cm Loading platform height approx. 89 cm Kingpin to end of lowloader length 927 cm Total length 987 cm 4x hydraulic landing legs Lashing eyes / rope pots Prepared for twistlocks for 20 ft containers Follow us on Instagram, Facebook, and TikTok to see our videos of trucks, commercial vehicles, and machinery offered for sale. We speak German We speak English Hablamos Español

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 8.280 kg, največja dovoljena obremenitev: 26.720 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 26 m³, vzmetenje: zrak, Leto izdelave: 2023, Oprema: ABS, Polpriklopni prekucnik Meiller Kipper KISA3 Leto 2022/2023 Tehnični podatki Dovoljena skupna masa 35.000 kg Teža 8.280 kg Nosilnost 26.720 kg Prostornina 26 m³ ABS Pnevmatske zavore Zračno vzmetenje 3 SAF osi Prva os dvignljiva Nosilec za rezervno pnevmatiko Popolna dokumentacija Dedpoy Ny Tijfx Al Hekl Tehnično in vizualno stanje je odlično.

Stanje: rabljeno, Leto izdelave: 2018, 2018 | MAN TGS 18.500 4x4H BLS with 2010 Kempf SKM 31/2 SR Tipper Semi-Trailer | Tipper | 349,909 km Dkjdpfxsyu Ttlo Al Hel 📍 Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 35,400 or Make an Offer. Payment upon delivery available for a reasonable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 35 inspection points: 33 approved ✅ 2 minor issues ℹ️ 0 problems ⚠️ 📌 Inspector's Comment: Good running truck, no further issues, PTO functions perfectly. 📄 Want to see the full inspection report, extra photos, or a video? Tip: The reference “40504 Equippo” is commonly used when looking up more details online. 💡 Why this machine and our service stand out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-back guarantee ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, lastna masa: 10.600 kg, največja dovoljena obremenitev: 27.400 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.170 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 900 mm, vzmetenje: zrak, barva: rumena, Leto izdelave: 2018, AMC CASTERA S/R 38T Semi-Trailer / Steering Axle Dodsy Iyr Nspfx Al Hjkl Year of manufacture: 2018 3 axles Weight: 10,600 kg Gross Vehicle Weight (GVW): 38,000 kg Payload capacity: 27,400 kg SMB axles Rear steering axle Hydraulically operated ramps Extended 20 cm per side Dimensions: Main deck length: 917 cm Gooseneck (balcony) length: 330 cm Width: 255 cm Ramp width: 90 cm Two-piece ramp length: 235 + 150 cm Ride height: 90 cm Air suspension Hydraulic winch Electro-hydraulic unit on trailer.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 9.000 kg, največja dovoljena obremenitev: 26.500 kg, skupna masa: 35.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.600 mm, vzmetenje: zrak, Leto izdelave: 2017, Polpriklopnik z nizko platformo Bodex NN3J Letnik 2017 Tehnični podatki Dovoljena skupna masa: 35.500 kg Teža: 9.000 kg Nosilnost: 26.500 kg Dimenzije Dolžina zgornje platforme: 535 cm Dolžina glavne podlage: 960 cm Dolžina hidravličnih ramp: 265 cm Stranska višina: 60 cm 3 osi Zračno vzmetenje Nosilec za rezervno pnevmatiko Dimenzija pnevmatik: 235/75 R17.5 Tehnično in vizualno stanje je odlično. Dodsy Iyrvepfx Al Hjkl

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 6.350 kg, največja dovoljena obremenitev: 29.150 kg, skupna masa: 35.500 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 48 m³, vzmetenje: zrak, barva: rdeča, Leto izdelave: 2022, Oprema: ABS, Polpriklopnik prekucnik Gras GS 35,5t / 48 m3! / 2022 / 3 enote Odlično stanje 2022 Djdpfxsy Iypne Al Hokl Tehnični podatki Dovoljena skupna masa 35.500 kg Lastna teža 6.350 kg Nosilnost 29.150 kg Prostornina 48 m3 Preklopna vrata Ventil 3 osi SAF Zračno vzmetenje ABS AGS Nosilec za 2 rezervni kolesi Ponudba vključuje 3 identične priklopnike.

Stanje: novo, največja dovoljena obremenitev: 16.390 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.480 mm, skupna višina: 860 mm, Oprema: ABS, MAX Trailer 300 NEW | 7.0 m Loading Platform | 16.4 t Payload | Ramps | from €38,600 New vehicle – configurable to your specific requirements. Compact and robust low-loader trailer designed for the safe transport of machinery, equipment, and vehicles. Engineered for high payload, easy handling, and cost-effective operation in daily use. --- Highlights --- • Approx. 16,390 kg payload • 7,000 mm loading platform length • Rear chamfer for easy loading • Manually adjustable aluminium ramps • Ramp load capacity up to 24,000 kg per pair • BPW axles with air suspension • EBS braking system Dkodpfxsypa Ape Al Hel • Compact dimensions – ideal for construction sites & service applications --- Technical Data --- • Gross weight: 21,000 kg • Unladen weight: approx. 4,610 kg (±3%) • Payload: approx. 16,390 kg • Loading platform length: 7,000 mm • Total width: 2,480 mm • Loading height at max. load: approx. 860 mm • Coupling heights: 700 / 775 / 850 mm • Maximum speed: 80 km/h --- Standard Features --- • Loading platform with hardwood flooring (approx. 38 mm) • Tread plate covering over the axles • Lashing points up to LC 5,000 daN and recessed lashing rings in the frame • Cut-outs in the outer frame for tension belts • BPW axles, air suspension, drum brakes with lift/lower function • EBS braking system (2S/2M) with spiral cable • LED lighting ASPÖCK NORDIK • Tire pressure monitoring system TPMS (ECE R141) --- Included Options / Accessories --- • Drawbar approx. 1,750 mm with 50 mm towing eye • Galvanised steel front wall, approx. 400 mm • Spare wheel with holder on the drawbar • Manual support leg at the front • Galvanised folding supports under the loading platform chamfer • European rear reflector panels • White reflective tape on sides and rear • Beacon holder at the rear • Holders for warning signs including socket • Mud flaps with MAX logo • Additional number plate holder rear right • User manual & documentation on USB stick Further equipment and individual adaptations are possible at any time – we configure your vehicle exactly to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 02/2004, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 2.620 mm, skupna dolžina: 13.900 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65/22.5, medosna razdalja: 9.310 mm, barva: rdeča, Leto izdelave: 2004, Oprema: ABS, Konfiguracija osi Dimenzija pnevmatik: 385/65/22.5 Zavore: bobnaste zavore Vzmetenje: zračno vzmetenje Zadnja os 1: Največja osna obremenitev: 9.000 kg; Profil pnevmatike levo: 30%; Profil pnevmatike desno: 30% Zadnja os 2: Največja osna obremenitev: 9.000 kg; Profil pnevmatike levo: 20%; Profil pnevmatike desno: 20% Zadnja os 3: Največja osna obremenitev: 9.000 kg; Profil pnevmatike levo: 30%; Profil pnevmatike desno: 30% Teže Lastna masa: 8.330 kg Nosilnost: 31.170 kg Skupna dovoljena masa: 39.500 kg Stanje Tehnično stanje: dobro Vizualno stanje: dobro Dkjdpfxsw S Hp Us Al Hol Dodatne informacije Za več informacij kontaktirajte Bas Wolfs ali Bas Wolfs.

Stanje: rabljeno, številka stroja/vozila: YF1S3HBN2KF03xxxx, Leto izdelave: 2019, Prosimo, navedite referenčno številko na zahtevo: 22297 Specifikacije: - 3-osni - Dvižna os (1. os) - Krmiljena os na 3. osi - Furgonska prikolica za 33 palet - Popolnoma stransko odpiranje - Carrier hladilna/zamrzovalna enota - Prečke za zavarovanje tovora - Pnevmatike (glejte slike) Dksdpfx Ajygf Huel Hol - Notranja dolžina: pribl. 13,4 m - Notranja širina: pribl. 2,5 m - Notranja višina: pribl. 2,79 m - Orodna škatla - Takoj na voljo Opis: Dobro opremljena furgonska prikolica Narko S3 iz leta 2019. S popolnoma stranskim odpiranjem, prečkami za zavarovanje tovora in hladilno/zamrzovalno enoto. Takoj na voljo. TÜV: Da EU potrdilo velja do: 05.08.2026 Lastna masa: 11.200 kg Skupna masa: 42.000 kg Nosilnost: 30.800 kg Širina: 2.600 mm Dolžina: 13.750 mm Model: S3 furgonska prikolica s hladilno/zamrzovalno enoto – popolnoma stransko odpiranje – prečke = Dodatne informacije = Za več informacij se obrnite na ATS Norway.

Stanje: rabljeno, največja dovoljena obremenitev: 27.199 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2013, dolžina tovornega prostora: 13.310 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 2.640 mm, prostornina tovornega prostora: 86 m³, Oprema: ABS, * 5412 - ID vozila za telefonske upite * Tip: SKO 24/L - 13.4 FP 60 COOL * ABS, EBS, Schmitz osovine, disk kočnice, zračni ovjes s podizanjem i spuštanjem, podizna osovina, sanduk za alat, portal vrata, dvostruki pod s gredama Dksdpfoxth R Iex Al Hjl * Carrier Maxima 1300, dizel (ENG 4.648 h), struja (SBY 3.326 h), -30°C / +30°C * Sanduk je obljepljen folijom / reklamom! * Gume 1. osovina: 385/65R22,5 (4 / 7 mm) * Gume 2. osovina: 385/65R22,5 (3 / 8 mm) * Gume 3. osovina: 385/65R22,5 (9 / 3 mm) ----naša e-mail adresa:     naša usluga za vas:       - Nabavka kratkoročnih ili carinskih tablica       - Prijevoz / dostava širom EU       - Carinjenje vozila za treće zemlje Ako imate pitanja na ruskom jeziku, možete nas nazvati na sledeći broj * WhatsApp samo za govornike ruskog jezika: * Whatsapp za engleski, nemački i druge jezike:

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, prva registracija: 06/2016, skupna dolžina: 13.900 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65/22.5, medosna razdalja: 9.970 mm, barva: modra, Leto izdelave: 2016, Oprema: ABS, = Dodatne možnosti in oprema = - Kolutne zavore = Dodatne informacije = Konfiguracija osi Dimenzije pnevmatik: 385/65/22.5 Zavore: Kolutne zavore Vzmetenje: Zračno vzmetenje Zadnja os 1: Profil pnevmatike levo: 30 %; Profil pnevmatike desno: 30 % Zadnja os 2: Profil pnevmatike levo: 30 %; Profil pnevmatike desno: 30 % Zadnja os 3: Profil pnevmatike levo: 30 %; Profil pnevmatike desno: 30 % Teže Lastna teža: 7.362 kg Nosilnost: 31.638 kg Dovoljena skupna masa: 39.000 kg Stanje Tehnično stanje: zelo dobro Optično stanje: zelo dobro Dodatne informacije Dkodpfjyzqqpox Al Hsl Za več informacij kontaktirajte Bas Wolfs ali Bas Wolfs.

Stanje: rabljeno, številka stroja/vozila: YF9TTS3LL8801xxxx, Leto izdelave: 2008, Prosimo, navedite referenčno številko na zahtevo: 22870 Specifikacije: 3 osi Dvižna os: 1. os Krmiljena os: 3. os Polno stransko odpiranje Hladilni/zamrzovalni agregat 33 paletnih mest Dobre pnevmatike Zračno vzmetenje Notranja dolžina: pribl. 13,4 m Notranja širina: pribl. 2,5 m Notranja višina: pribl. 2,7 m Pripravljeno za dostavo Opombe: Lastnik navaja, da je prva os zlomljena TÜV: Da EU homologacija do: 19.08.2026 Lastna masa: 10 760 kg Skupna masa: 45 000 kg Nosilnost: 34 240 kg Širina: 260 cm Dksdsyyg Uhspfx Al Hjl Dolžina: 1 360 cm Model: L3 Skapsemi s hl./zamr. agregatom – EU odobreno – Objekt za popravilo = Več informacij = Za več informacij se obrnite na ATS Norway.

Stanje: rabljeno, največja dovoljena obremenitev: 27.206 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2010, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 13.310 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 86 m³, Oprema: ABS, * 7861 - ID vozila za telefonske upite * Tip: SKO 24/L - 13.4 FP 60 COOL * ABS, EBS, Schmitz osovine, disk kočnice, vazdušno vešanje podizanje + spuštanje, podizna osovina, sanduk za alat, portali vrata, dvozonski tovarni prostor sa gredama * Carrier Maxima 1300, dizel (ENG 5972 h), struja (SBY 5.243 h), -30°C / +30°C * Sanduk oblepljen folijom / reklamom! * Gume prva osovina: 385/65R22,5 (3 / 4 mm) * Gume druga osovina: 385/65R22,5 (7 / 6 mm) * Gume treća osovina: 385/65R22,5 (8 / 8 mm) ----naša email adresa:     naša usluga za vas:       - Nabavka privremenih ili carinskih tablica       - Transport / isporuka širom EU       - Carinjenje vozila za treće zemlje Ako imate pitanja na ruskom jeziku, možete nas pozvati na sledeći broj* WhatsApp samo za govornike ruskog jezika: * Whatsapp za engleski, nemački i druge jezike: Dedpexth Rnsfx Al Hskl

Stanje: rabljeno, številka stroja/vozila: ***XMROVB00090000123, konfiguracija osi: 3 osi, prva registracija: 01/2009, skupna dolžina: 16.750 mm, skupna širina: 2.500 mm, skupna višina: 2.600 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17.5, barva: drugo, Leto izdelave: 2009, Chassis Diameter of kingpin / fifth wheel: 2 inch Structure Turntable height: 120 cm Special transport Length over axles: 1185 cm Length of loading floor: 1185 cm Gooseneck length: 420 cm Low loader: ✓ Maximum width: 250 cm Maximum length: 4315 cm Extendable: ✓ Dodpfxsu H Itqj Al Hekl Tank Fuel: ✓ = Further Information = Axle configuration Tyre size: 245/70 R17.5 Axle make: BPW ECO Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin tyres; Steering; Tyre tread left outside: 30%; Tyre tread right outside: 35% Axle 2: Twin tyres; Steering; Tyre tread left outside: 60%; Tyre tread right outside: 60% Axle 3: Twin tyres; Steering; Tyre tread left outside: 55%; Tyre tread right outside: 65% Axle 4: Twin tyres; Steering; Tyre tread left outside: 40%; Tyre tread right outside: 30% Weights Gross vehicle weight: 65,000 kg Functional Body brand: Nooteboom Loading platform height: 125 cm = Company information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.