Es-Ge 48T 3A Radmulden Hydr. Ramps Wheel nakup rabljenega (39.749)

Stanje: novo, največja dovoljena obremenitev: 30.740 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift/lowering system and RtR valve * Smard board for load weight determination * Warning sign packages front & rear * Reflective contour marking tapes on sides and rear * Rotating beacon (removable) at rear * LED lights * Straight drawbar with 50 mm towing eye and continuously adjustable height * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, right-hand side * Closed single plastic mudguards at front * Straight rear steel splash guards, each with spray suppression * Side underrun protection * Turntable platform front extension by 520 mm with 45° corners and 3 flush storage compartments with lids, lockable * Chassis made of high-strength fine-grained steel * Decking above turntable platform: 50 mm softwood, in low-bed platform: 60 mm softwood * Outer planks of access ramps: hardwood * Each side features 4 stake pockets (stakes not included), with simultaneous 2 t lashing points * Lashing package includes: 2 lashing rings 6.4 t, front left and right on main frame of turntable platform * On sides, front & rear, 2 pairs of 13.4 t lashing rings on outer frame; sides each with 4 pairs of 10 t lashing rings, pivoting & lowerable * Loadable in all directions, recessed in the outer frame * 2 pairs of 6.4 t lashing rings on the excavator stick rest area * 8 pairs of galvanized folding outriggers for 3 m overall width (not in the rear slope) * Extension planks stored left side in a stowage compartment * Excavator stick rest above rear axle to rear slope approx. 2,100 x 740 x 190 mm * Mechanical drop supports, rear * Hydraulic folding ramps with hydraulic tip section approx. 4,650 x 720 mm including lateral hydraulic ramp shift & load holding valve * Load area over turntable: approx. 2,990 x 2,520 mm * Rear load area: approx. 6,780 x 2,520 mm * Loading height loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm drive-on slope) * Flow divider installed * Chassis, turntable, ramps, outrigger arms, and mechanical rear supports hot-dip galvanized * Axles, drawbar, air reservoir, and turntable painted in a black tone * Tires: 235/75 R 17.5 Rodpfjl Tphrox Alxew * New vehicle, not previously registered, with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 37.560 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: Rsdpfx Ajykx Nkolxew ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 ton BPW axles * Start assist for shunting purposes on the first axle, activated via EBS (without truck-side installation) * Last axle is a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle for maneuvering purposes from the driver’s cab via EBS (without truck-side installation) ----Suspension: * Air suspension with lift and lowering function as well as RtR valve ----Electrics / Lighting: * Smart-Board infotool mounted on trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at rear for overlength lighting * Side marker lamps with indicator function * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Support legs at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Swing arm as a carrier for connecting lines from truck to semi-trailer ----Low Loader Platform: * 2nd king pin position * Gooseneck platform with 45° chamfered front corners and front-mounted toolbox made of galvanized, powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm aluminum side boards (in desired RAL color) foldable and removable along the gooseneck platform * Rear wall, insertable, height 150 mm * Rear incline on the gooseneck platform to the low-bed approx. 700 mm long with checker plate covering and at the end a perforated strip for attaching aluminum approach ramps * Gooseneck platform with 50 mm clamped wooden planks, low-bed platform with 60 mm clamped wooden planks * Tread plate over axles * 9 mechanical extension panels to a total width of 3 m, not included in the rear incline (extension planks available with closed transverse stowage compartment under load floor) * Preparation for 3 storage recesses under the gooseneck platform for optional storage of aluminum approach ramps or planks for covering wheel recesses * Preparation for container locks on the swan neck ----Load Securing (LaSi Package): Gooseneck platform: * Perforated outer frame, 45° angled, with hole pattern for lashing devices (2 t lashing capacity per point with a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings recessed into the floor per side (1 x on gooseneck platform, 1 x on longitudinal frame after the cranking, 1 x above middle axle next to longitudinal frame) Low-bed platform: * 3 x 13.4 t lashing rings per side at the outer frame (1 x start of gooseneck cranking, 1 x start of approach ramp, 1 x end of approach ramp) * 2 x 10 t lashing rings per side (1 x between front wheel recess and 1st axle, 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings per side screwed to outer frames of the wheel recesses (2 at front wheel recess, 1 at rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last rigid axle over the steering axle to the end cross member, continuous with internal reinforcing profile approx. W = 770 mm x T rear

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lowering system, including RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED beacon, rear left Rsdpfx Aley Ngzyexew ----General Attachments: * Side underrun protection * Support legs at the front and mechanical swivel supports at the rear of the chassis * Straight pressed steel fenders * Spare wheel holder under the chassis, right side ----Low Loader Deck: * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear board plug-in, 150 mm high * Rear slope on fifth wheel platform to low-bed approx. 700 mm long * Fifth wheel platform with 50 mm timber planks, low-bed deck with 60 mm timber planks * Tread plate above the axles ----Widenings: * 8 x mechanical folding extensions to a total width of 3 meters (not on rear slope; extension planks available with storage on the platform) * Mechanically adjustable warning panel sets front and rear ----Load Securing (Lashing Package): * On the fifth wheel platform: 2 x 6.3 t lashing rings on each side, plus 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side, plus 4 x 10 t lashing rings, pivotable and lowerable, recessed in the outer frame * 2 x 6.4 t lashing eyes per side, plus 1 lashing ring at the excavator arm rest * 2 x container locks directly after the neck in the low-bed platform ----Excavator Arm Rest: * Continuous excavator arm rest from end of last fixed axle over steering axle to end crossbeam, with internal reinforcements, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanical one-piece hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * Outer board on ramp made from 50 mm hardwood * Climbing strips on outer frame of ramp and on approach slope * Rubber matting on ramp and approach slope ----Hydraulics: * Hydraulic flow divider in trailer (for hydraulic pump performance in the truck between 40 l/min and 120 l/min) ----Loading Dimensions: * Fifth wheel platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Coating: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, support legs, air tanks painted in a black shade * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images may show equipment not included with the offered vehicle ----Delivery time: * available from c

Stanje: novo, največja dovoljena obremenitev: 28.600 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 25 m³, Leto izdelave: 2026, Zavora: * Wabco EBS-E / ABS (elektronski zavorni sistem z RSS) * Nujno sproščanje za valj z vzmetno silo * Kolutne zavore 22,5" * Položajna zavora s skrajšanimi zadnjimi blatniki in ročnim stikalom za zaključek ----Premi: * 3 x 9 t BPW ali SAF – premi (odvisno od razpoložljivosti) * Dvižna os z zagonsko pomočjo ----Vzmetenje: * Zračno vzmetenje z avtomatskim spuščanjem med dvigovanjem kesona (za povečanje stabilnosti, možno izključiti pri prekrivanju stropov) ----Elektrika / razsvetljava: * Sistem za nadzor tlaka v pnevmatikah (TPMS) * 1 x 15-polna priključna vtičnica za priklop * Eco-LED II osvetlitev s streho za zaščito * 1 x dodatna LED delovna luč * Utripajoče bočne označevalne luči ----Splošna dodatna oprema: * Aluminijasti zračni rezervoar * Teleskopske jeklene nosilne noge s ploščatimi podstavki (možno spustiti le pri praznem vozilu) * 4 m aluminijasta lestev, pritrjena desno ob blatniku * Zaprti plastični posamezni blatniki * Preklopna bočna zaščita pod vozilom * Vlečna kljuka zadaj * Zložljiva vstopna lestev spredaj levo * Škatla za dokumente na čelni steni ----Okvir: * Visok podvozni okvir iz visoko trdnega finezrnatega jekla z Meiller torzijskimi prečniki ----Kiparska nadgradnja: * Polkrožna zadnja kiper korita iz jekla STEELECT 450 -HBW 450- * Čelna stena s 600 mm streho kot nosilec ponjave * Bočne stene z močno -v celoti potekajočo- navznoter nagnjeno zgornjo ojačitvijo ----Debelina dna, stranic, čelne in zadnje stene: * Čelna, bočni in zadnja stena 4 mm * Čelna in zadnja stena nagnjeni * Tailored dno 5/6 mm ----Hidravlični cilinder: * Prednji hidravlični cilinder s srednjim delovnim tlakom ----Hidravlična zadnja stena: * Prilegajoča in nihajoča hidravlična zadnja stena. Upravljanje zadnje stene preko mehanske krogelne pipe ----Ponjava: * Električna drsna ponjava -RAL 9006 bela aluminijasta- z ročnim stikalom na podvozju in daljinskim upravljalnikom ----Nakladalna prostornina: * pribl. 25 m³ ----Višina priklopa: * naložen pribl. 1.350 mm * obremenjen pribl. 1.340 mm ----Barva: * Barvanje podvozja v RAL 7021 črno-siva * Kiper nadgradnja v RAL 9006 bela aluminijasta ----Splošne informacije: Rsdpjxxf Tqofx Alxow * --Tehnično dovoljeno skupno težo 39.000 kg-- * Napake in vmesna prodaja pridržane * Novo vozilo z garancijo proizvajalca ----Rok dobave: * dobava od 37. tedna 2026

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle hydraulically steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lower function as well as RtR valve Rodpfol Tnvgjx Alxsw ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED flashing beacon, rear left ----General attachments: * Side underrun protection * Landing gears in the front and mechanical swing supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder mounted on the chassis, right-hand side ----Low-loader platform: * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized steel, width = 2,480 mm x height = 500 mm x length = 665 mm, with folding lid * 400 mm high aluminum sideboards (RAL 9010 pure white) on both sides of the fifth wheel platform, foldable and removable * Rear wall – 150 mm high, slotted in * Rear slope on the fifth wheel platform down to the low-bed area, approx. 700 mm long * Fifth wheel platform fitted with 50 mm wooden planks, low-bed area with 60 mm wooden planks * Tread plate above the axles ----Width extensions: * 8 x mechanical folding width extensions to a total width of 3 m, except in the rear slope area (extension planks available with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages front and rear ----Load securing (lashing package): * On the fifth wheel platform, 2 x 6.3 t lashing eyes each as well as 3 x 5 t lashing bars on each side in the outer frame * In the low-bed area, 2 x 13.4 t lashing rings on each side as well as 4 x 10 t lashing rings, swiveling and retractable, integrated into the outer frame * 2 x 6.4 t lashing eyes on each side and 1 lashing eye at the rear in the excavator trough * 2 x container locks directly after the kick-up section in the low-bed platform ----Excavator trough: * Excavator trough from end of last rigid axle over steering axle up to the end brace, continuous, with internal reinforcement profile, approx. L = 2,450 mm x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * The outer board of the ramp is made from 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacities in the truck from over 40 l to 120 l/min) ----Loading dimensions: * Loading area of fifth wheel platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) ----Coupling height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear swing supports, extension consoles hot-dip galvanized * Axles, landing gears, air tanks painted in black tone * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may contain equipment not included with the offered v

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: Redpfxsl Th Ads Alxew * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at rear * Side underrun protection * Pivoting supports at the rear on chassis frame * Mechanically adjustable warning sign packages front and rear * Front closed plastic mudguards and rear straight galvanized steel skirts, each with splash protection * Reflective contour tape on sides and rear * Fold-down (hot-dip galvanized) lid for toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at rear * Drawbar with 40 mm draw eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * 4 stake pockets on each side (stakes not included), with simultaneous lashing facility * Load securing package (La-Si-Paket) comprising: 2 lashing eyes (6.4 t) front left & right on main frame of turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions and recessed into outer frame - in the corners rated to 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in rear inclined section) * Extension boards stowed in the center of the loading area * Excavator arm rest over rear axle up to end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Hydraulic one-piece ramps (approx. 3,000 x 720 mm) * 4-way control block for future retrofitting of hydraulic ramp shift * Mechanical lateral ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unloaded loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unloaded loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tank, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 28.640 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.600 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 25 m³, Leto izdelave: 2026, Oprema: ABS, Zavora: * Wabco EBS-E / ABS (elektronski zavorni sistem z RSS) * Siliščno odklepanje za vzmetne cilindre * Kolutne zavore 22,5" * Zavorni sistem za finišer s skrajšanimi zadnjimi blatniki in ročnim stikalom za finišer ----Os: * 3 x 9 t BPW ali SAF osi (odvisno od razpoložljivosti) * Dvižna os z zagonsko pomočjo ----Vzmetenje: * Zračno vzmetenje z avtomatskim spuščanjem med postopkom kipanja (za povečanje stabilnosti, možno izklopiti za stroje za polaganje asfalta) ----Elektrika / razsvetljava: * Sistem za nadzor tlaka v pnevmatikah (TPMS) * 1 x 15-polna vtičnica za prikolice * 5-komorni zadnji žarometi s zaščitno streho * 1 x dodatni LED delovni žaromet * utripajoče stranske označevalne luči ----Splošni dodatki: * Aluminijasti zračni rezervoar * Jost teleskopske jeklene podporne noge s ploščato nogo (mogoče odklopiti le v praznem stanju) * 4 m aluminijaste lestve, nameščene desno ob strani nad blatniki * zaprti plastični posamezni blatniki * preklopna zaščita proti podletu * vlečna kljuka zadaj * pregibna lestev za vzpon spredaj levo ob strani * škatla za dokumente na prednji steni ----Okvir: * Šasija iz visoko trdnega finezrnatega jekla s prečkami, tipičnimi za Meiller ----Kiparska nadgradnja: * Polkrožna jeklena zadnja kiper korita * Prednja stena s 600 mm streho kot nosilec ponjave * Stranske stene z robustnim neprekinjenim zgornjim robom, nagnjenim navznoter * Prednja in zadnja stena poševni ----Debelina dna, stranskih sten, prednje in zadnje stene: * Prednja stena 4 mm iz jekla BS 70 * Zadnja loputa 4 mm iz jekla HBW 400 * Stranske stene iz 4 mm jekla HBW 450 * Prilagojeno dno iz 5/6 mm Hardox jekla 450 ----Hidravlični cilinder: * Sprednji hidravlični cilinder z zmernim delovnim tlakom ----Hidravlična zadnja stena: * Ležeča hidravlična in nihajoča zadnja stena. Upravljanje hidravlične zadnje stene prek mehanskega krogelnega ventilskega bloka ----Ponjave: * električna drsna ponjava - RAL 9006 bela aluminij - s stikalom na šasiji in daljinskim upravljalnikom ----Nakladalna prostornina: * cca. 25 m³ ----Višina sedla: * prazno cca. 1.247 mm * naloženo cca. 1.217 mm ----Barva: * Barvanje šasije v RAL 7021 črno sivi * Kiper nadgradnja v RAL 9006 belo aluminij Rsdpjxxf Twefx Alxew ----Splošne informacije: * --Tehnično dovoljena skupna masa je 39.000 kg-- * Možnost napake in predhodne prodaje * Novo vozilo s tovarniško garancijo ----Dobavni rok: * dobavljivo od 37. tedna / 2026

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle trailing steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift-and-lower function and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as an infotool with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Landing gears at the front as well as mechanical swing-down supports at the rear of the chassis * Straight sheet steel mudguards * Spare wheel holder under the chassis on the right side ----Low Loader Deck: * Gooseneck platform with 45° chamfered front corners and front toolbox made of galvanized sheet steel W = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm aluminium side boards (RAL 9010 pure white) on the gooseneck, foldable and removable * Rear wall – 150 mm – fitted * Rear slope at the gooseneck platform to the low-bed approx. 700 mm long * Gooseneck platform with 50 mm timber planks, low-bed platform with 60 mm timber planks * Tread plate over the axles ----Extensions: * 8 x mechanical fold-out extensions to 3 m total width, but not on the rear slope (extension planks present with storage on gooseneck platform) * Mechanically adjustable warning sign packages front and rear ----Load Securing (Lashing Package): * On the gooseneck platform: 2 x 6.3 t lashing rings each side and 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform sides: 2 x 13.4 t lashing rings each, and 4 x 10 t swivel and lowerable lashing rings recessed in the outer frame * 2 x 6.4 t lashing eyes per side and rear 1 lashing ring in the excavator arm recess * 2 x container locks directly after the gooseneck in the low-bed platform ----Excavator Arm Recess: * Excavator arm recess from end of last rigid axle, over steering axle to end crossmember, continuous, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Loading Ramps: * Mechanically one-piece hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer retrofit of hydraulic ramp shifting * The outer board of the ramp consists of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the drive-up slope * Rubber on the ramp and drive-up slope Rodpfx Asy Ngz Helxow ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck from 40 up to 120 l/min) ----Loading Dimensions: * Loading area, gooseneck platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm drive-up slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, extension brackets hot-dip galvanized * Axles, landing gears, air reservoirs painted in a black tone * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may include features not part of the offered vehicle * Sample images ----Delivery time: * tba

Stanje: novo, največja dovoljena obremenitev: 27.760 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 25 m³, Leto izdelave: 2026, Brakes: * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes 420 x 180 mm * Paver brake with shortened rear mudguards and manual paver switch ----Axle: * 3 x 9 t BPW axles * 1st axle liftable with traction aid ----Suspension: * Air suspension with automatic lowering during the tipping process (for increased stability; can be deactivated for overhead pavers) ----Electrics / Lighting: * Smart-Board (lift and lowering system, lifting axle lowering, traction aid, odometer, axle load indicator, ECAS, error memory reading) * Tire pressure monitoring system (TPMS) * 1 x 15-pin trailer socket * Eco-LED II lighting with protective cover * 1 x additional LED work lamp * Flashing side marker lights ----General attachments: * Aluminium air tanks * Telescopic steel landing legs with plate foot (can only be unhitched when empty) * Enclosed plastic single mudguards * 4 m aluminium access ladder, stored on the right side over the mudguards * Folding underrun protection * Rear tow eye ----Chassis: Rsdpfsw Eg Edex Alxsw * High chassis frame made of high-tensile fine grain steel, heavy-duty version ----Tipping body: * Semi-round steel rear tipper body, complete, made of STEELECT 450 steel -HBW 450- * Side walls with robust, continuous, inward-angled top belt * Outside access and aluminium platform in front of front wall ----Thickness of floor, side walls, front and rear wall: * Front and rear wall inclined * Front and rear wall 5 mm * Side walls 6 mm * Floor 8 mm, HBW 450 steel ----Hydraulic ram: * Front hydraulic ram with medium working pressure ----Hydraulic tailgate: * Overlapping hydraulic and swinging tailgate * Control of hydraulic tailgate via mechanical ball valve ----Tarpaulin: * Manual roll-up tarpaulin - RAL 9006 white aluminium ----Loading volume: * Approx. 25 m³ ----Fifth wheel height: * Unladen approx. 1,340 mm * Laden approx. 1,330 mm ----Paintwork: * Chassis painted RAL 7021 black grey * Tipping body RAL 9006 white aluminium ----General information: * --Technical gross weight of up to 39,000 kg possible-- * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery time: * Available from week 11/2026

Stanje: novo, največja dovoljena obremenitev: 37.560 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Moving-off aid for shunting, connected to the first axle via EBS (no installation required on the truck side) * Last axle as self-steering trailing axle with electro-pneumatic lock * Trailing axle lock for shunting purposes, activated from the cab via EBS (no installation required on the truck side) ----Suspension: Rodpsykx Nqofx Alxow * Air suspension with lifting and lowering system, including RtR valve ----Electrics / Lighting: * Smart-Board infotool mounted on trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at rear for overlength lighting * Side marker lights with indicator circuit * Tire pressure monitoring with display in the truck via EBS signal (no installation required on the truck side) ----General Attachments: * Side underrun protection * Landing gear at front, swing supports at rear of the chassis * Straight steel fenders * Spare wheel carrier in front of front wall crossmember (spare wheel not included) * Mechanically adjustable warning sign packages at front and rear * Swing arm as carrier for connection lines from truck to trailer ----Low Loader Deck: * 2nd kingpin position * Saddled platform with 45° chamfered front corners and front toolbox made from galvanized, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high drop-down/removable aluminium sideboards (custom RAL color) on saddle platform * Removable 150 mm high rear wall * Rear inclined ramp of approx. 700 mm at the end of saddle platform to low-bed deck, fitted with checker plate and lashing bar for attaching aluminium approach ramps * Saddle platform with 50 mm tongued-and-grooved timber floor, low-bed platform with 60 mm tongued-and-grooved timber planks * Tread plate above axles * 9 x mechanical folding extensions to 3 m overall width, but not on rear ramp (extension planks included with lockable transverse storage compartment under load area) * Preparation for 3 ramp storage compartments under saddle platform for either aluminium ramps or timber planks for wheel trough covers * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Saddle Platform: * Perforated external frame, angled at 45°, with hole pattern for lashing equipment (2 t lashing capacity per point, minimum spacing 480 mm) * 3 x 13.4 t recessed tie-down rings per side (1 on saddle platform, 1 on main longitudinal beams after the step, 1 above the center axle beside the beam) Low-bed Deck: * 3 x 13.4 t tie-down rings per side on outer frame (1 at the start of the gooseneck, 1 at the start of the rear ramp, 1 at the end of the ramp) * 2 x 10 t tie-down rings per side (1 between front wheel-well and 1st axle, 1 between 2nd and 3rd axle) * 3 x 5 t tie-down rings per side, bolted to the outer frame of wheel wells (2 at front, 1 at rear wheel well) ----Digger Arm Rest: * Extended digger arm rest from end of last fixed axle over steering axle to end crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D at rear

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing supports at the rear of the chassis frame * Mechanically adjustable warning board sets at front and rear * Front axle: enclosed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for toolbox in the bogie platform * Multi-voltage system * LED rear lights Rsdpjx Ipbgofx Alxjw * Rotating beacon (removable) at rear * Drawbar with 40 mm towing eye and height adjustment by draw spring & turnbuckle * 15-pin electrical connector * Four lashing pocket sockets per side (no stakes included) with simultaneous lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the bogie platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and embedded in the outer frame - 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in rear slope section) * Widening planks stored in the middle of the loading area * Excavator boom rest over rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator boom rest) * Hydraulic, one-piece drive-on ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable, lateral ramp displacement * Loading area above slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, drawbar and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, etc., painted in black shade * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * -- technically permissible gross weight: 30,000 kg -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from approx. week 36/2026

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with steering function and electro-pneumatic steering lock ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * Smartboard operator panel mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General attachments: * Side underrun protection * Landing legs at the front and mechanical swing supports at rear of chassis * Straight steel mudguards * Spare wheel carrier mounted under chassis, right side ----Low-loader platform: * Gooseneck platform with 45° chamfered front corners and tool box at the front made of galvanized steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high aluminum side boards (RAL 9010 pure white) foldable and removable, along the sides of the gooseneck platform * Rear panel 150 mm high, plug-in * Rear slope on the gooseneck platform leading to low-bed, approx. 700 mm long * Gooseneck platform with 50 mm wooden planks; low-bed platform with 60 mm wooden planks * Tread plate over the axles ----Extensions: * 8 x mechanical folding extensions to a total width of 3 m (not on the rear slope, extension planks available with storage on gooseneck platform) * Mechanically adjustable warning panel sets, front and rear ----Load securing (Lashing package): * On the gooseneck platform: 2 x 6.3 t lashing rings per side and 3 x 5 t lashing bars per side on the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, swivel and lowerable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side and 1 lashing ring at the rear, in the excavator-arm recess * 2 x container locks immediately after the step in the low-bed platform ----Excavator-arm recess: * Continuous from the end of the last rigid axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access ramps: * Mechanical one-piece, hot-dip galvanized hydraulic access ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * Quadruple control block for future retrofitting of hydraulically lateral shifting ramps by customer * The outer plank on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output of 40 up to 120 liters/min in the truck) ----Loading dimensions: * Gooseneck platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach slope) ----Fifth wheel height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paint/Finish: Rsdpfxspk D I Ae Alxsw * Chassis, access ramps, rear folding supports, and extension brackets are hot-dip galvanized * Axles, landing legs, and air reservoirs are painted in a shade of black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Sample images may show equipment not included in the offered vehicle ----Delivery time: * Available from week 38/2026

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing supports at the rear of the chassis frame * Mechanically adjustable warning board sets at front and rear * Front axle: enclosed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for toolbox in the bogie platform * Multi-voltage system * LED rear lights * Rotating beacon (removable) at rear * Drawbar with 40 mm towing eye and height adjustment by draw spring & turnbuckle * 15-pin electrical connector * Four lashing pocket sockets per side (no stakes included) with simultaneous lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the bogie platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and embedded in the outer frame - 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in rear slope section) * Widening planks stored in the middle of the loading area * Excavator boom rest over rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator boom rest) * Hydraulic, one-piece drive-on ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable, lateral ramp displacement * Loading area above slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm Rodjx Ipb Hopfx Alxjw * Unladen loading height: approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, drawbar and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, etc., painted in black shade * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * -- technically permissible gross weight: 30,000 kg -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from approx. week 36/2026

Stanje: rabljeno, prevoženi kilometri: 122.196 km, Leto izdelave: 2017, obratovalne ure: 8.592 h, Pogon: kolesa Lastna teža: 26.000 kg Dvižna zmogljivost: 40.000 kg Dimenzije tovornega prostora: 1070 x 255 x 340 cm Redsw Uch Eepfx Alxjw Serijska številka: 256086 Stanje pnevmatik spredaj: 70 Stanje pnevmatik zadaj: 70 Za več informacij se obrnite na PFEIFER GROUP.

Stanje: rabljeno, prevoženi kilometri: 369.767 km, moč: 368 kW (500,34 KM), prva registracija: 04/2013, vrsta goriva: dizel, velikost pnevmatike: 385/55R22.5, konfiguracija osi: 6x2, medosna razdalja: 3.700 mm, gorivo: dizel, zavore: zaviranje z motorjem, barva: zelen, vrsta prenosa: samodejen, emisijski razred: Euro 5, vzmetenje: zrak, dolžina tovornega prostora: 5.200 mm, širina tovornega prostora: 2.510 mm, višina nakladalnega prostora: 1.100 mm, Leto izdelave: 2013, Oprema: ABS, AdBlue, centralno zaklepanje, klimatska naprava, spojka prikolice, zapora diferenciala, = Dodatne možnosti in oprema = - Centralno zaklepanje z daljinskim upravljanjem - Dvižna os - Zračno vzmetenje - Vlečna kljuka (Maulkupplung) - Senčnik - Dodatne luči (Spotlights) = Opombe = Nakladalni prostor: 520 cm Višina tal nakladališča: 110 cm Višina nakladanja v območju kolesnega loka: 90 cm. Rodpfjzc Rhcjx Alxew = Dodatne informacije = Tehnični podatki Število cilindrov: 6 Konfiguracija osi Zavore: kolutne zavore Vzmetenje: zračno vzmetenje Prednja os: dimenzija pnevmatik: 385/55R22.5; vodilna; profil pnevmatik levo: 60%; profil pnevmatik desno: 60% Zadnja os 1: dimenzija pnevmatik: 315/60R22.5; dvojna montaža; profil pnevmatik znotraj levo: 70%; profil pnevmatik zunaj levo: 70%; profil pnevmatik znotraj desno: 70%; profil pnevmatik zunaj desno: 70% Zadnja os 2: dimenzija pnevmatik: 315/60R22.5; dvojna montaža; profil pnevmatik znotraj levo: 70%; profil pnevmatik zunaj levo: 70%; profil pnevmatik znotraj desno: 70%; profil pnevmatik zunaj desno: 70% Teža Lastna teža: 10.300 kg Nosilnost: 17.700 kg Največja dovoljena skupna masa: 28.000 kg Identifikacija Tip: FM 500 6x2 / PREVOZ STROJEV / = Podatki o podjetju = VSE CENE SO NETO ZA IZVOZ. Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) Govorim rusko. Prizadevamo si zagotoviti pravilne informacije, vendar iz navedenega besedila ni mogoče uveljavljati nobenih pravic.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 180 kg, največja dovoljena obremenitev: 570 kg, skupna masa: 750 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.440 mm, širina tovornega prostora: 900 mm, skupna dolžina: 3.200 mm, skupna širina: 1.570 mm, skupna višina: 980 mm, vzmetenje: drugo, velikost pnevmatike: R13, zavoro prikolice: priklopnik brez zavor, Balhanger MTO-1 / MTO-2 Motorcycle Transporter, Hydraulically Lowerable / Stowable / with Aluminium Floor - NEW VEHICLE - PRE-ORDER FOR JULY! Technical Data MTO-1 (for 1 motorcycle): Permissible Gross Weight: 750 kg Unladen Weight: 180 kg Payload: 570 kg Overall Dimensions: 320 x 157 x 98 cm Load Area Length: 244 cm Maximum Load Area Width: 90 cm Tyres: R13 Stowed Height (storage position): only 2.20 m Features and Design MTO-1: - Without brakes, single axle - Maintenance-free rubber spring axle - Trailer hydraulically lowerable - Sturdy steel frame with cross braces, hot-dip galvanized and black powder-coated - Non-slip aluminium floor - Trailer can be easily raised/stowed (with stand) by folding up the rear floor - 1x front wheel chock and 1x rear wheel guide as standard - 12 lashing rings on the outer frame - Jockey wheel - 12V electrics, 13-pin plug - Complete LED lighting as standard, multifunction rear lamps Technical Data MTO-2 (for 2 motorcycles, surcharge applies!): Rsdpfx Aewrm Tnolxow > For MTO-2, see separate offer! Permissible Gross Weight: 750 kg Unladen Weight: 240 kg Payload: 510 kg Overall Dimensions: 320 x 220 x 98 cm Load Area Length: 244 cm Maximum Load Area Width: 160 cm Tyres: R13 Stowed Height (storage position): 2.20 m Info 100 km/h unbraked: The following applies: for unbraked trailers, if you want to use the trailer’s 100 km/h approval (where applicable), the empty weight of the towing vehicle must be at least 0.3 times the trailer’s permissible gross weight. This is the most unfavourable scenario. Accordingly, for a 750 kg trailer, the towing vehicle needs an unladen weight of at least 750 / 0.3 = 2500 kg. If your towing vehicle is lighter, you can have the trailer derated (TÜV). For example, if your towing vehicle has an unladen weight of 1600 kg, the trailer must be derated to 1600 x 0.3 = 480 kg. You must then manage with the remaining payload, regardless of tow vehicle or speed. The trailer’s permissible gross weight must not exceed the unbraked towing capacity (O2) entered in the vehicle registration document. Note on LED: With some car models, LED trailer lighting may not function properly. This occurs mostly with newer cars because of the low power consumption of LED technology. To ensure the lights on the trailer work properly, the towing vehicle or the towbar must be fitted with an additional module that supports LED lighting. Lorries does not supply this module with production trailers. Optional Accessories for Extra Charge: - Alloy wheels - Various motorcycle transport straps - Spare wheel with bracket ! Many more trailers at >>> trelex.de ! * Financing and trade-in possible! * Huge selection: Over 300 trailers in stock – visit us! * Competent and fair advice, fast processing. * Questions? Just call us! NOTE: Immediate collection not possible without pre-order!

Stanje: rabljeno, Leto izdelave: 2021, obratovalne ure: 11.715 h, nosilnost: 2.500 kg, dvižna višina: 4.130 mm, vrsta goriva: plin, gradbena višina: 2.680 mm, vrsta prenosa: samodejen, Oprema: kabina, zaščita za glavo, Hyster H 2.5 T plinski viljuškar -- Duplex jarbol Redpfx Aley Sqm Sexew -- Priključak: nosač viljuški širine 1070 mm + podešavanje razmaka, rotirajući Meyer 5-0104K + 1200 mm -- Hidraulično podešavanje razmaka viljuški (min. širina 550 mm / maks. širina 1.820 mm) -- Rotirajući uređaj 360 stepeni -- Dužina viljuški 1.200 mm -- Rotaciono svetlo -- Bezbednosno svetlo napred i pozadi -- Motor / tip PSI / 2.4 -- Tip / model H 2.5 T -- Zapremina motora (ccm) / cilindara 2351 / R 4 -- Izvedba / tip Prednji viljuškar / plin -- Snaga motora (kW) 44 -- Kabina otvorena -- Pogon hidrostatički -- Maksimalna nosivost (kg) 2.500 -- Radna masa (kg) 4.450 -- Prva registracija / godina proizvodnje 2021 -- Ukupna masa (kg) 7.040 -- Međuosovinsko rastojanje (mm) 1.650 -- Radni sati (h) 11.715 -- Maksimalna visina podizanja (mm) 4.130 -- Dužina viljuški (mm) 1.200 -- Širina traga (mm) 965 -- Nagib unazad 5,0 stepeni -- Dubina profila napred 12 mm -- Dubina profila pozadi 16 mm -- Vazdušno amortizovano sedište -- Zakovana, rotirajuća konzola za gasnu bocu

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 01/2019, skupna dolžina: 13.800 mm, skupna širina: 2.750 mm, skupna višina: 3.200 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17.5, barva: drugo, Leto izdelave: 2019, Oprema: ABS, = Dodatne možnosti in oprema = - Dvižna os - Krmiljena os = Opombe = Šasija Premer priklopnega zatiča / sedla: 2 inča Višina priklopnega zatiča / oje: 120 cm Bobnaste zavore: ✓ Posebni transport Dvodelne cestne plošče: ✓ Hidravlične rampe: ✓ Dolžina nakladalne površine: 920 cm (1420 cm iztegnjeno) Nizkopodna prikolica: ✓ Maksimalna širina: 325 cm Maksimalna dolžina: 1420 cm Razširljivo: ✓ Iztegljivo: ✓ = Dodatne informacije = Konfiguracija osi Dimenzije pnevmatik: 245/70 R17,5 Znamka osi: Bpwecoplus Redpfjzc Eiuox Alxsw Zavore: bobnaste zavore Vzmetenje: zračno vzmetenje Prva sprednja os: dvojna montaža; profil pnevmatik levi zunanji: 45%; profil pnevmatik desni zunanji: 45% Druga sprednja os: dvojna montaža; profil pnevmatik levi zunanji: 30%; profil pnevmatik desni zunanji: 55% Sredinska os: dvojna montaža; profil pnevmatik levi zunanji: 25%; profil pnevmatik desni zunanji: 20% Prva zadnja os: dvojna montaža; krmiljena; profil pnevmatik levi zunanji: 45%; profil pnevmatik desni zunanji: 50% Druga zadnja os: dvojna montaža; krmiljena; profil pnevmatik levi zunanji: 35%; profil pnevmatik desni zunanji: 35% Teže Dovoljena skupna masa: 84.000 kg Identifikacija Registrska številka: N2627491 = Podatki o podjetju = Za več informacij o tej enoti pokličite: ali pišite na e-pošto: . Celoten pregled zaloge si lahko ogledate na: . Ne pozabite se naročiti na naše novice za tedenske posodobitve o naši zalogi.

Stanje: rabljeno, številka stroja/vozila: SA93114FTBT11xxxx, Leto izdelave: 2011, Prosimo, navedite referenčno številko ob povpraševanju: 23813 Rsdpfezgrp Iex Alxjw Specifikacije: 3 osi 1 krmiljena os Hidravlične nakladalne rampe Največja dovoljena nosilnost: 22.360 kg Pnevmatike v solidnem stanju Takoj na voljo Opis: Prikolica za prevoz strojev, letnik 2011, z hidravličnimi nakladalnimi rampami. Takoj na voljo. TÜV: Ne EU-homologacija do: 23.07.2025 Lastna teža: 7640 kg Skupna teža: 30000 kg Nosilnost: 22360 kg Širina: 255 cm Dolžina: 1167 cm Model: McCauley MAC transportna prikolica za stroje s hidravličnimi rampe za vožnjo = Dodatne informacije = Za dodatne informacije se obrnite na ATS Norway.

Stanje: rabljeno, največja dovoljena obremenitev: 21.660 kg, skupna masa: 28.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/1994, dolžina tovornega prostora: 11.900 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.400 mm, skupna širina: 2.550 mm, Vozilo / Nadgradnja: Polpriklopnik Prva registracija: 03/94 Skupna teža: 28.000 kg Lastna teža: 6.340 kg Nosilnost: 21.660 kg Skupna dolžina: 12.220 mm – 14.220 mm Redpfxjyn Uzwj Alxjw Dolžina nakladalnega prostora: cca 11.900 mm – 13.900 mm Širina: 2.550 mm / Nakladalna širina cca 2.500 mm Višina nakladanja: cca 1.400 mm Dodatne informacije: - Prednja stena 950 mm - LED vzvratne luči - 1. os je dvižna - Obremenitev agregata 18.000 kg - Hidravlično izvlečni zadnji izvlek - 2 m teleskopski izložni krak - Priključna mesta za kole in kole - Zračno vzmetenje - 6 parov priveznih obročev - 2x plastična škatla za orodje - Višinsko nastavljive sredinske podporne noge - Zaščita podvozja - BPW osi Vozilo je lahko polepljeno in/ali potiskano z oglasnimi napisi

Stanje: rabljeno, Leto izdelave: 2018, obratovalne ure: 5.081 h, Oprema: pogon na vsa štiri kolesa, Nakladalna žlica cca 1,8 m³, hidravlični hitri menjalni sistem, paletne vilice, dobro ohranjeno, vozilo je lahko polepljeno in/ali označeno z oglaševanjem. SI86211 Naša ponudba je načeloma brez nove TÜV homologacije. Če želite novo TÜV homologacijo, vam jo lahko ponudimo prek naših partnerskih delavnic! Vozilo je lahko polepljeno in/ali označeno z oglaševanjem. Veljajo naši splošni dobavni in plačilni pogoji. Za ta predmet vam z veseljem pripravimo ponudbo za financiranje ali leasing. Rodexb Id Rspfx Alxew Kontaktirajte nas!

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 3.670 h, Kompaktni bager z prestavljivo roko in Bigpilotom, GPS upravljanje, lomljenim iztegom, roka cca 2000 mm, hidravlični hitri priklop, oprema za grabež in kladivo, žlica cca 1800 mm, talne plošče 600 mm, planirni ščit, LED osvetlitev, vzvratna kamera, centralni mazalni sistem, opozorilna rotacijska luč, klimatska naprava. Vozilo je lahko polepljeno in/ali označeno z oglaševanjem. SI86047 Rodsw Iaa Ejpfx Alxow Naša ponudba je praviloma brez novega tehničnega pregleda. Če želite nov tehnični pregled, vam lahko pripravimo ponudbo iz partnerskih delavnic! Vozilo je lahko polepljeno ali označeno z oglaševanjem. Veljajo naši splošni pogoji dobave in plačila. Za ta predmet vam z veseljem pripravimo ponudbo za financiranje ali leasing. Prosimo, kontaktirajte nas!

Stanje: rabljeno, največja dovoljena obremenitev: 14.300 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2020, naslednji pregled (TÜV): 02/2027, dolžina tovornega prostora: 9.800 mm, širina tovornega prostora: 2.520 mm, Oprema: ABS, * ABS * Zadnje podpore * BPW ECO-Plus osi * Oranžna opozorilna luč Rjdpoy T Dh Sofx Alxow * Aluminijasta platišča * Duomatik zračni priključek ----Nadgradnja: Pocinčan nizkopodestni priklopnik (2500+7300 mm)/Višina nakladanja cca 900 mm, zadaj znižan/Naklonska višina cca 770 mm, jeklen/lesen pod in protidrsna prevleka, razširljiv na 3 m, hidravlične nakladalne rampe (zložljive za nizek nakladalni kot) s protidrsno prevleko, tudi hidravlično bočno pomične, pričvrstitveni obroči Prodaja le pravnim osebam. PRI IZVOZU JE TREBA PLAČATI SAMO NETO CENO!!!! VSE INFORMACIJE SO BREZ JAMSTVA, VKLJUČNO Z OPREMO IN DODATKI. Osnova vseh prodajnih pogodb, računov, predračunov, naročil in prodajnih pogovorov so naši splošni pogoji (glejte impressum).

Stanje: novo, Brian James Race Sport – Enclosed Car Transporter with Electric Winch Manufacturer: Brian James Trailers Model: Race Sport 341-5020-30-2-12-W Enclosed car transporter Internal dimensions: 5000 x 2000 x 1960 mm (L x W x H) External dimensions: 7400 x 2390 x 2540 mm (L x W x H) Clearance height: 1880 mm Gross vehicle weight: 3000 kg Unladen weight: approx. 1305 kg Payload: approx. 1695 kg (payload may vary depending on equipment and configuration) Side reverse lights – Super-bright, side-mounted LED reversing lights for optimal illumination when manoeuvring/loading in the dark Additional loading ramps for a shallow approach angle, storage compartment at the rear for ramps during transport Dual front hatch doors for easier lashing of the front wheels Cast steel coupling head with integrated high-security lock Alloy wheels including spare wheel Front storage compartments with lids On-board battery and trailer control system housed in a watertight enclosure with switches, battery charge indicator, and connectors for winch and tilt function Battery charges via the towing vehicle while driving and can also be charged via the supplied mains charger Bright solar-powered LED lighting Special wheel straps for optimal load securing Numerous lashing points directly on the platform for professional load securing Electric winch with wireless remote control Low-profile wheel stops Large side access flaps (both sides) Heavy-duty jockey wheel Daylight roof Brian James - Art.-No. 341-5020-30-2-12-W Additional options and accessories for this trailer: Electrohydraulic tilting function Hydraulic tilting function Front storage space for e.g., 20-litre petrol can Workbench Rear props Tyre protection mats Redey I Exujpfx Alxjw Mains connection Registration of your new trailer with the road traffic authority

Stanje: novo, Brian James Race Sport – Enclosed Car Transporter with Electric Winch • Manufacturer: Brian James Trailers • Model: Race Sport 341-5020-30-2-12-B • Enclosed car transporter • Internal dimensions: 5000 x 2000 x 1960 mm (L x W x H) • External dimensions: 7400 x 2390 x 2540 mm (L x W x H) • Entry height: 1880 mm • Permissible total weight: 3000 kg • Unladen weight: approx. 1305 kg • Payload: approx. 1695 kg (Payload may vary depending on equipment and configuration) • Side-mounted reversing lights – Ultra-bright, side-mounted LED reverse lights ensure optimal illumination during maneuvering/loading at night • Additional loading ramps for a shallow loading angle, can be stored internally at the rear during transit • Dual front access doors facilitate strapping down the front wheels • Cast steel coupling head with integrated high-security lock • Alloy wheels including spare wheel • Front storage compartments with lid • Onboard battery and trailer controls are housed in a waterproof box with switches, battery level indicator, and connectors for winch and tilt functions. The battery is charged via the towing vehicle during travel and can also be charged using the supplied mains charger • Bright solar-powered LED lighting • Special wheel tie-down straps for optimal load securing • Numerous lashing points directly on the loading platform for professional load securing • Electric winch with wireless remote control Rodpoy I Exbefx Alxew • Low-profile wheel chocks • Large side lift-up panels (both sides) • Heavy-duty jockey wheel • Daylight roof Brian James – 341-5020-30-2-12-B Possible additional options and accessories for this trailer: • Electro-hydraulic tilt function • Hydraulic tilt function • Front storage space for e.g. 20-litre petrol cans • Workbench • Rear support stands • Tyre protection mats • Shore power connection • Registration of your new trailer with the road traffic authority