Fliegl Dts 300 P 3-Achs Plateau Tieflader 8,2M Luft Hyd nakup rabljenega (54.201)

Stanje: novo, lastna masa: 9.300 kg, največja dovoljena obremenitev: 38.700 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.200 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, barva: sivo-črna, Oprema: ABS, Cargo Area: • Extendable cargo area with pneumatically operated locking mechanism • Cargo platform with approx. 30 mm thick timber flooring • 7 pairs of external folding lashing rings (LC 5,000 daN) • 3 pairs of external folding lashing rings (LC 10,000 daN) • Cutouts in the outer frame of the cargo area for attaching tensioning straps (LC 2,000 daN) Axles and Tyres: • BPW axles and suspension, all axles hydromechanically forced-steered • Equipped with disc brakes • Technical axle load: 10,000 kg • Air suspension with lift and lower valve • Axle tool kit • Tyres: 385/65 R 22.5 • TPMS tire pressure monitoring system compliant with ECE R 141 Brake System: • WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Electrical System: • Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) • ASPÖCK-UNIBOX at the front control strip with 24N, 24S & 15-pin sockets • Connections as per ISO standards • 24N ISO-1185 • 24S ISO-3731 • 15-pin ISO-12098 Standard Accessories Included: • Remote-controlled steering from front and rear via cable remote control with push buttons, including single-track axle monitoring • 4 wheel chocks with holders mounted on the front wall • 2" king pin • One galvanized steel front wall, approx. 1,600 mm high • Yellow-red air couplings at the galvanized front connection strip • White reflective tape compliant with EU standards on both sides, on extension, and at the rear of the trailer in red • European reflective plates (red-yellow) at the rear of the trailer • One mud flap at the rear of the trailer • Operating manual and instructions • Mount for a revolving beacon at the rear of the trailer Pjdpfxeiu Etre Ahtegn • Cargo area with approx. 30 mm thick timber floor inset in omega profiles • 10 pairs of stake pockets (100 x 50 mm) in the outer frame of the cargo bed • 1 spare wheel holder under the cargo area, right-hand side in the direction of travel • Electro-hydraulic unit • At the gooseneck and rear panel left/right, each with bracket for warning signs, incl. socket • Coated sand layer on the main beam as anti-slip protection • 6 pairs of WADER container pockets in the cargo area for 1x20ft, 2x20ft or 1x40ft containers; additional locking point provided in the extension for a 45ft container • 4 pairs of transverse stake pocket rails in the cargo area for plug-in stakes 100 x 50 mm • Access ladder mounted on the right side in the direction of travel • One HDPE toolbox approx. 1,200 x 500 x 480 mm at the front under the cargo bed, left in the direction of travel • BEKAMAX (Pico) centralized lubrication system with removable pump guard • Lift axle on front axle, controlled via TEBS E according to dynamic axle load and load status • Wireless remote control for steering, in addition to cable operation, with indicator lights on receiver for single-track monitoring • Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm, equipped with position light • Bracket for revolving beacon on the warning signs • 80 km/h speed sticker on rear and both sides • Load gauge for axle load determination, including load chart • HRM (High Resistance Metallisation) of the outer frame • Complete steel construction shot blasted; subsequently, defined visible surfaces metallised by hot-dip application with ZINACOR 850 (85% zinc – 15% aluminium)

Stanje: novo, lastna masa: 10.600 kg, največja dovoljena obremenitev: 35.400 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 940 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Loading area: - Loading deck in extendable design - Loading deck with hardwood planks, rear bevel approx. 500 mm x 8° - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - Cut-outs in the loading deck's external frame for attaching tension belts Braking system: - Braking system in accordance with EU regulations, with EBS-E (2S2M) Painting: - First-class, durable corrosion protection for the standard shot-blasted welded frame guaranteed by a two-component (2K) zinc-rich primer - High-quality two-component (2K) top coat in solid Novagrey - Rear section metallised and painted in RAL 9010 (pure white) - Metallic paint not available Pgedol Ux Rwepfx Ahtsn Landing gear: - JOST mechanical landing gear with 2-speed gearbox, 24t lifting capacity (test load 50t) Steel construction: - Steel structure made from high-strength fine grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, LED lighting 24 Volt - Sockets: 2x 7-pin & 15-pin Axles and tyres: - BPW axles, air suspended, with disc brakes (377 mm), with lifting/lowering function - Hydro-mechanically forced steering - Axle tools - Twin tyres 235/75 R 17.5 Accessories included: - Yellow-red air couplings at the galvanised front connection bar - 4 wheel chocks with holder - 2" king pin - Galvanised steel headboard approx. 1600 mm high - White reflective tape on the sides, sliding section and rear in red in accordance with EU regulations - Loading deck with heavy-duty hardwood floor - Rear and front steering by cable - Remote control via push buttons, with single-track monitoring of the axles - With wireless remote control for rear steering - 9 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the loading deck - Galvanised folding supports under the loading deck bevel - Sliding mounting rail for aluminium loading ramps at the rear of the vehicle - European reflective panels (red-yellow) at the trailer rear - One mud flap at the trailer rear - Mount for a beacon at the trailer rear - Mounts for warning boards including socket on gooseneck and rear panel, each left and right - Stainless steel toolbox INOX 1,500 x 390 x 810 under the loading deck, right side in driving direction - Central lubrication system BEKAMAX (Pico) with NLHI-2 multipurpose grease and removable protection around pump - 6 pairs of WADER container locks on the loading deck for 1x 20ft, 2x 20ft or 1x 40ft containers, additional locking for one 45ft container in extendable section - 4 pairs of crosswise stake pocket strips mounted in the loading area for 100 x 50 mm plug-in stakes - Lift axle on the first axle, controlled by TEBS, dependent on current axle load and load condition - 80 km/h speed stickers at the rear and on both sides - Four extendable warning boards ca. 400 mm (approx. 423 x 423 mm) with LED position light - Beacon mount on the warning boards - Load gauge for axle load determination, including load diagram - HRM metallisation (High Resistance Metallisation) on the external frame - Complete steel construction shot-blasted, then all defined visible areas metallised with ZINACOR 850 (85% zinc, 15% aluminium) by thermal spraying

Stanje: novo, lastna masa: 9.500 kg, največja dovoljena obremenitev: 35.500 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R 19.5, barva: siv, obratovalna teža: 9.500 kg, Oprema: ABS, Loading platform in extendable design: Loading platform with hardwood planks, rear bevel approx. 1,000 mm x 8° 1 pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm 2 pairs of lashing rings (LC 5,000 daN) 1 pair of lashing rings (LC 10,000 daN) 6 pairs of fold-out lashing rings on the outside (LC 5,000 daN) 2 pairs of fold-out lashing rings on the outside (LC 10,000 daN) Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) Brake system: Brake system as per EU regulations with EBS-E (2S2M) Paintwork: Premium, long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer Pjdok Eammopfx Ahtjgn High-quality single-colour 2-component (2K) top coat in Nova grey Rear section metallized and painted in RAL 9010 (Pure White) No metallic paint possible Landing gear: JOST mechanical landing gear with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: Steel construction from high-tensile fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system: Electrical system according to EU regulations, 24 volt lighting Sockets: 24N, 24S & 15-pin Axles and tyres: BPW axles, air suspension, with disc brakes (377 mm), with lift/lower function Trailing steering axles with electro-magnetic reversing lock, actuated via reverse gear or manually Axle tool Tyres: 435/50 R 19.5 Accessories included: At the galvanized front connection strip: yellow-red air couplings 4 wheel chocks with brackets 2" kingpin Galvanized steel front wall approx. 1,600 mm high, EN12642-XL White reflective tape to EU standards on the sides, extension section and red at the rear Loading platform with heavy-duty hardwood floor 9 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform 1 spare wheel holder under the platform on the right (direction of travel) Galvanized folding supports under the rear slope of the loading area Sliding mounting rails for ALU loading ramps at the rear of the vehicle European reflective plates (red-yellow) at the rear of the semi-trailer One mudflap at the rear of the semi-trailer Bracket for a rotating beacon at the rear of the semi-trailer At the gooseneck and on the rear panel left and right, each with a bracket for warning panels including socket One HDPE toolbox 620x360x610 under the platform on the left (direction of travel) 4 pairs of WADER container locks in the platform for 1x 20ft container or 1x 40ft container; additional locking position in the extension for a 45ft container 3 pairs of transverse stake pocket rails on the platform for 100 x 50 mm plug-in stanchions Lift axle on the front axle with control via TEBS E, depending on current axle load and loading condition Speed stickers 80 km/h on the rear and both sides Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light. Mounting for rotating beacon on warning boards Load gauge including axle load diagram HRM metallization (High Resistance Metallisation) of the outer frame Complete steel structure shot blasted, then specified visible surfaces metallized

Stanje: novo, lastna masa: 11.300 kg, največja dovoljena obremenitev: 36.700 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.250 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 r 22,5, barva: sivo-črna, Oprema: ABS, Loading platform: Loading platform in extendable design with pneumatically operated locking mechanism A fixed intermediate table, approx. 250 mm wide, is mounted on the central beam 8 pairs of lashing rings, foldable outwards (LC 5,000 daN) 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) Openings in the outer frame of the loading platform for attaching tensioning straps (LC 2,000 daN) Axles and tyres: BPW axles and suspension, all axles with hydro-mechanical forced steering Disc brakes, technical axle load: 10,000 kg Pedpshlz Shefx Ahtegn Air suspension with lift and lower valve Axle tools 6 tyres, size 385/65 R 22.5 Brake system: Brake system according to EU regulations with EBS-E (2S2M) Landing gear: JOST landing legs (mechanically operated) with 2-speed gearbox for 24 t lift load (50 t test load) Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX mounted on the front terminal board with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: First-class, long-lasting corrosion protection of the standard grit-blasted welded frame, guaranteed by a 2-component (2K) zinc-dust primer High-quality, single-colour 2-component (2K) top coat in Novagrau Rear section metallised and painted in RAL 9010 (pure white) No metallic paint finish possible Included accessories: At the gooseneck and at the rear plate, left and right, each with a bracket for warning signs, including socket Remote steering from the front and rear via cable remote control with push buttons, with single-track control of the axles Electro-hydraulic unit 4 wheel chocks with brackets on the front wall 2" kingpin A galvanised steel front wall approx. 2,200 mm high Yellow-red air couplings on the galvanised front terminal board White reflective tape on the side, at the extension and rear in accordance with EU regulations, red at the rear European reflective plates (red-yellow) on the rear of the trailer One mud flap on the rear of the trailer Manual and documentation Bracket for a revolving warning light at the rear of the trailer Loading platform with approx. 30 mm thick wooden floor set in omega profiles 10 pairs of stake pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading platform 1 spare wheel holder under the loading platform on the right-hand side in the driving direction 6 pairs of WADER container locks in the loading platform, for 1x 20ft container, 2x 20ft containers or 1x 40ft container; in the extension, an additional locking position is provided for a 45ft container 5 pairs of stake pocket strips, mounted transversely in the loading platform, for plug-in stanchions 100 x 50 mm A galvanised bracket mounted transversely under the loading platform (2,390 x 720 x 400 mm) Access ladder mounted on the right in the direction of travel One HDPE toolbox 1,200x500x480 mounted at the front under the loading platform on the left in the direction of travel Lift axle on the front axle with control via TEBS E depending on the current axle load and loading status Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable protection around the pump Red/white reflective tape on the extension of the loading platform On the central beam,

Stanje: novo, lastna masa: 6.350 kg, največja dovoljena obremenitev: 38.650 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, Loading Platform: - 2 pairs of folding external lashing rings (LC 5,000 daN) - 24 pairs of cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Landing Legs: - JOST mechanical landing legs with 2-speed gearbox, 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, air suspended, with disc brakes (430 mm), lift/lower function - Tyres: 385/65 R 22.5 Braking System: - WABCO braking system compliant with EU regulations featuring EBS-E (2S2M) Paintwork: - Premium and durable corrosion protection of the standard grit-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat in single-tone MB 7350 Novagrau - Rear section metallized and painted in RAL 9010 (pure white) - Metallic paintwork not possible Steel Construction: - Steel construction made from high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical System: - Electrical system in accordance with EU regulations - Lighting: 24 volt - ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S, and 15-pin sockets - Connection standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories included: - Yellow-red air couplings at the galvanized front connection bar - 4 wheel chocks with holders - 2" king pin - Galvanized steel front wall approx. 1,600 mm high, EN12642-XL - White reflector tape according to EU regulations, lateral and rear red - European reflective panels (red-yellow) at the rear of the trailer Pgsdpfx Ahsiu Etkoten - Loading platform with approx. 30 mm thick hardwood flooring, framed in omega profiles - 10 pairs of stanchion sockets for 100 x 50 mm plug-in stakes in the outer frame - 3 pairs of transverse stanchion rack strips, fitted in the loading platform, for 100 x 50 mm plug-in stakes - Bracket for 1,000 mm plug-in stakes, rear in the central beam - 1 spare wheel carrier under the loading platform on the right hand side - 1 mudflap at the rear of the trailer - Manual and description on USB stick - Bracket for beacon at the rear of the trailer - Holders for warning signs including socket at the gooseneck and left/right rear panel - 6 pairs of WADER container locks on the loading platform for 1x 20ft, 2x 20ft, or 1x 40ft container, flush with rear - 80 km/h speed stickers at the rear and both sides - Four warning signs, extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light - Load gauge for axle load determination including load diagram - HRM (High Resistance Metallisation) of the outer frame - Complete steel structure is grit blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - aluminium 15%) by hot coating

Stanje: novo, lastna masa: 8.300 kg, največja dovoljena obremenitev: 36.700 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.080 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22.5, barva: siv, Oprema: ABS, dvižna zadnja plošča, Loading platform: Loading platform in extendable design with pneumatically operated locking mechanism Cutouts in the outer frame of the loading platform for attaching lashing straps Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity Axles and tires: BPW axles, air-suspended, with disc brakes (430 mm), with lift/lower function Trailing steering axle with electromagnetic reverse lock, activated via reverse gear or manually Axle tools Tires 385/65 R 22.5 Braking system: WABCO braking system in accordance with EU regulations with EBS-E Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer A high-quality single-color 2-component topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 No metallic paint available Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N / S355MC S690QL / S700MC Electrical system: Electrical system in accordance with EU regulations Lighting: 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front connection bar with 24N, 24S and 15-pin sockets Connection according to ISO Accessories included: Front galvanized connection bar with yellow-red air couplings One galvanized steel front wall approx. 1,600 mm high, EN12642-XL 4 wheel chocks with holders White reflector tape according to EU regulations on the sides, on the extension, and in red at the rear European reflective plates at the rear of the trailer Loading platform with approx. 30 mm thick hardwood floor enclosed in omega profiles 10 pairs of stake pockets for insertable stakes 100 x 50 mm in the outer frame of the loading platform 1 spare wheel holder under the loading platform, right-hand side in the direction of travel Manual and description One holder for a rotating beacon at the rear of the trailer On the gooseneck and each side of the rear plate (left and right), a bracket for warning panels incl. socket Anti-slip sand layer painted onto the central beam 6 pairs of WADER container pockets in the loading platform, for 1x 20ft container, 2x 20ft containers, or 1x 40ft container; the extension includes an additional locking point for one 45ft container 4 pairs of transverse stake pocket rails mounted in the loading platform for plug-in stakes 100 x 50 mm One galvanized holder transversely under the loading platform, 2,390 x 720 x 400 mm Pjdpfjikyh Hjx Ahtjgn Access ladder mounted right-hand side in direction of travel Front axle lift axle with control via TEBS E depending on current axle load and load status Load manometer for determining axle loads, including load chart HRM metallization of the outer frame: complete steel structure shot-blasted, then the defined visible surfaces metallized hot-finished with ZINACOR 850

Stanje: novo, lastna masa: 10.000 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 51.600 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Loading Platform: - Gooseneck, length approx. 4,100 mm with central beam - Extendable loading platform, length approx. 9,500 mm with rear taper approx. 350 mm x 10° and integrated hook-on bar for attaching loose ALU approach ramps - Pneumatic locking system with conical locking bolts and reinforced locking positions - Supply lines are protected inside the extendable beams and automatically adjust to the respective platform length Axles, Suspension, and Tyres: - BPW axles and suspension, all axles hydro-mechanically forced steered - Mounted on turntable - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Tyres 235/75 R17.5, twin-mounted Paintwork: - 6-coat surface treatment - Complete steel structure shot-blasted after welding - One coat of zinc-based primer, one coat of adhesion primer - Final paintwork with 2 layers of 2-component (acrylic) paint, single colour in MB 7350 Novagrau, followed by cavity sealing with special wax Steel Structure: - Steel structure made from high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) - Welders certified according to DIN-EN 287-1 - Welding process MAG according to EN ISO 4063, shielding gas M21 according to EN ISO 14175 Accessories: - Steel front wall, approx. 1,600 mm high - Round NATO socket at the front connection strip - 3 kW electro-hydraulic unit for controlling hydraulic functions - 4 pairs of recessed lashing rings in the outer frame of the gooseneck - 4 pairs of stake pockets integrated into the outer frame of the gooseneck for stakes approx. 100x50 mm - 1 transverse stake pocket strip mounted in the floor of the gooseneck for stakes approx. 100x50 mm (1x rear on gooseneck) - 2'' kingpin - Mechanical landing legs with 2-speed gearbox and hand crank - JOST Module B – static test load = 50,000 kg - On the gooseneck and loading area, approx. 32 mm wooden flooring in ALU-omega profiles - One locking position on the extension, approx. every 500 mm - 10 pairs of recessed folding lashing rings in the outer frame of the loading area, folding outwards - 6 pairs of stake pockets integrated into the outer frame of the loading area for stakes approx. 100x50 mm - 2 transverse stake pocket strips mounted in the floor of the loading area for stakes approx. 100x50 mm - INOX toolbox approx. 1,250 x 500 x 550 mm - Tapered end crossmember of the vehicle, approx. 350 mm 10° - Integrated hook-on bar for loose ALU approach ramps at the rear crossmember of the vehicle - 1 pair of drop tube supports at the rear crossmember - Mudguards on all axles Pjdpfxsiuy Nls Ahtsgn - Central lubrication system with 1 pump - Remote steering from front and rear operable via cable remote control with push button, including single-track monitoring of the axles - Under the gooseneck and at the rear crossmember, left and right, each with a 7-pin socket for warning panels - One 7-pin socket at the rear crossmember - Container locks "TWIST-LOCKS" in the loading area for transport of 2x 20ft and 1x 40ft containers - Radio remote control for rear steering in addition to cable remote control, with 2 indicator lights on the receiver for single-track monitoring - 2 axle load gauges + axle load diagram - 4 warning panels approx. 423 x 423 mm, extendable by approx. 400 mm - Standard HRM Metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible areas hot-coated in metallic finish using ZIN

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R 19.5, barva: siv, Oprema: ABS, Loading platform: - Loading platform in extendable design with pneumatically operated locking mechanism - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tension belts Pgodei Dwlwopfx Ahtsn Axles and tires: - BPW axles, air-suspended, with disc brakes (377 mm), equipped with lifting/lowering function - Self-steering axles with electromagnetically controlled reverse lock, activated via reverse gear or manually - Axle tools - Tires: 435/50 R 19.5 Brake system: - Brake system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - Premium, durable corrosion protection for the standard shot-blasted welded frame by means of two-component (2K) zinc dust primer - High-quality two-component (2K) top coat in solid Novagrau - Rear end metallized and painted in RAL 9010 (pure white) - Metallic paint not available Landing gear: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: - Steel structure made of high-strength fine-grained steels. - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDICK (ASS3) lighting - ASPÖCK-UNIBOX on the front connection console with 24N, 24S & 15-pin sockets - Connections according to ISO standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories included: - Yellow-red air couplings at the galvanized front connection strip - 2 wheel chocks with holder - 2" kingpin - A galvanized steel front wall approx. 1,600 mm high - Yellow reflective tape as per EU regulations, on the sides, on the extension and at the rear of the trailer - European reflective signs (red-yellow) at the rear of the trailer - Loading area with approx. 38 mm thick hardwood floor - 10 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the platform - 1 spare wheel holder beneath the loading area on the right in the direction of travel - User manual and documentation on USB stick - One mudflap at the rear of the trailer - Bracket for a revolving beacon at the rear of the trailer - On the gooseneck and on the rear panel, left and right, each a bracket for warning boards including socket - One INOX toolbox transversely mounted beneath the platform (1,000x400x2,500mm) - 6 pairs of WADER container locks in the platform for 1x 20ft container, 2x 20ft containers or 1x 40ft container; an additional locking point is provided in the extension for a 45ft container - 3 sets of crosswise post pocket bars mounted in the platform for 100 x 50 mm plug-in posts - 60 km/h speed sticker on the rear - 2 reversing spotlights mounted on the rear panel - Four warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with a position light - Mounting bracket for rotating beacon on the warning sign - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, the defined visible surfaces then hot-finished with ZINACOR 850 metallisation (zinc 85% - aluminum 15%)

Stanje: novo, lastna masa: 6.000 kg, največja dovoljena obremenitev: 24.000 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.540 mm, širina tovornega prostora: 2.550 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 r17,5, Leto izdelave: 2026, Oprema: ABS, osrednja vrtljiva plošča, 3-AXLE HUMBAUR LOW-LOADER TRAILER INCLUDES: 3 PAIRS OF 6-TON LASHING POINTS IN THE OUTER FRAME => HOT-DIP GALVANIZED CHASSIS FRAME => HOT-DIP GALVANIZED BOGIE FRAME => HOT-DIP GALVANIZED LOADING RAMPS => 10 x 10-TON LASHING POINTS => 10 x 3-TON LASHING POINTS, outer frame => 8 x 2-TON LASHING POINTS, above wheels => SPRING-ASSISTED LIFTING DEVICE FOR RAMPS => 40 mm DRAWBAR => APPROX. 2,700 MM LONG LOADING RAMPS => APPROX. 750 MM WIDE LOADING RAMPS => TWIN TIRES 235/75 R17.5 INCH => LOADED PLATFORM HEIGHT ONLY APPROX. 860 MM => COUPLING LENGTH / B-LENGTH APPROX. 10,720 MM => FRONT CORNERS BEVELLED => TWO FOLDING SUPPORT LEGS AT REAR => AND MUCH MORE => Delivery freight: 2.90 Euros plus VAT per km Pgodpfxjd U A Tgj Ahton => Prices ex works D-86368 Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes!* *Price valid ex works D-86368 Gersthofen* *Sale to commercial customers only!* *Pictures may differ and serve only as an approximate reference => may show/include options subject to surcharge*

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 5.000 kg, največja dovoljena obremenitev: 22.000 kg, skupna masa: 29.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.500 mm, širina tovornega prostora: 2.170 mm, skupna dolžina: 11.700 mm, skupna širina: 2.550 mm, skupna višina: 2.650 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 r 17,5, stanje pnevmatik: 100 odstotek, Rešitev za transport po meri Konfigurirajte Fliegl vozilo glede na vaše zahteve. Prikazano vozilo je primer. Proizvodnja in oprema sta individualno prilagojeni željam strank. Dodatne informacije Podvozje Varjena konstrukcija iz drobnozrnatega jekla, sedelna plošča z zamenljivim 2. zatičem (kraljevski zatič), z dvema položajema zatiča Pgjdpfx Aei Ri Hvjhtjn Zunanja šasija rahlo stožčasta s Load-Lock profilom za pritrditev napenjalnih trakov 2 para priveznic (zank za privez) v zunanjem okviru na labodjem vratu v utoru, vsaka 5 t 8 parov priveznic v zunanjem okviru na spuščeni površini (tiefbett), vsaka 5 t 24 t dvostopenjski podporni vitel, enostransko upravljanje, s ravnim podstavkom, brez kompenzacije potiskov 2 priložena zagozda s pritrditvijo Bočna zaščita iz aluminija Zaščita pred podvozjem iz jekla Četrtinski blatniki pred in za osnim agregatom 2 zabojnika iz nerjavečega jekla, b=600/h=400/t=500 mm, z ogledalno-polirano zaklepno vrata 2 para žepov za vložne kolike v zunanjem okviru na labodjem vratu, notranja mera 70 x 40 mm 6 parov žepov za vložne kolike v zunanjem okviru v spuščeni površini (tiefbett), notranja mera 70 x 40 mm Notranja širina med koli: 2.420 mm 3 vezne/palice za zavezovanje v spuščeni površini, prečno v tleh preko celotne širine do zunanjega okvirja, približno 100 mm visoko. Z 20mm okroglimi jeklenimi letvami, zgoraj in spodaj, razdalja zgoraj-spodaj približno 60 mm. Spodaj z kotnim profilom kot zaključek, deloma odprto navzdol. Za fiksiranje in vstavljanje koli 80 x 80 mm. Št. vstavljivih koli B=80/ T=50/ L=1200 mm, vroče pocinkane Št. vstavljivih koli B=80/ T=80/ L=1200 mm, vroče pocinkane Mehanična zadnja izvlečna plošča z ročno ročico, izvlečljiva približno 1.500 mm, z zaporo vsakih 500 mm, z nosilnim tramom, v težišču bremena: pri 500 mm obremenljivo z 2.000 kg čez celotno širino, pri 1.000 mm z 1.000 kg in pri 1.500 mm z 500 kg, vključno z izvlečno zaščito podvozja z osvetlitvijo 2 para vstavljivih koli B=80/ T=80/ L=1200 mm, vroče pocinkane Odprti prostor za shranjevanje vstavljivih koli, na prednji steni ali pod nakladalno površino (za 10 vstavljivih koli 80 x 50 x 1200 mm in 4 koli 80 x 80 x 1200 mm) Osi in vzmetenje SAF osi z bobnastimi zavorami Lasermerjeno podvozje za zmanjšanje obrabe pnevmatik in porabe goriva Zadnja os vodljiva, z avtomatsko blokado za vzvratno vožnjo prek vzvratnih luči, dodatna blokada prek gumba na vozilu Zračno vzmetenje z ventilom za dvig in spust Kolesa in pnevmatike 235/75 R 17,5 po izbiri proizvajalca Jekleni platišča v dvojni montaži, tovarniška srebrna barva Zavorni sistem Dvovodna pnevmatska zavorna naprava Parkirna zavora z vzmetnim akumulatorjem 2 proti zamenjavi varna spojna glava spredaj, brez povezovalne cevi EBS, elektronski zavorni sistem z EBS vtičem spredaj, brez povezovalnega kabla Pozor: Priklopno vozilo se sme vleči le z vlečnimi vozili, ki zagotavljajo delovanje ABS! Prepoznavanje obremenitve osi prek EBS-Canbus signala, prikaz na zaslonu v kabini; tovornjak mora biti ustrezno pripravljen, ni vključno z vgradnjo v tovornjak Elektrika 24 V, večkomorni žarometi, stranska rumena LED osvetlitev 2 bele pozicijske luči spredaj 2 kombinirani bele/rdeče označevalne luči zadaj 2 x 7-polna vtičnica spredaj, brez povezovalnega kabla 2 dodatna LED delovna žarometa zadaj, vezana na vzvratno luč 1 LED rotacijska opozorilna luč z nosilcem, vključeno na parkirno luč (luč snemljiva) dodatna 7-polna vt...

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 6.950 kg, največja dovoljena obremenitev: 23.050 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.500 mm, širina tovornega prostora: 2.520 mm, skupna dolžina: 9.350 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Rešitev za prevoz po meri Konfigurirajte svoje Fliegl vozilo glede na vaše zahteve. Prikazano vozilo je primer. Proizvodnja in oprema se izvajata individualno glede na želje stranke. Šasija prikolice s centralno osjo, gradbena izvedba Varjena konstrukcija iz drobnozrnatega jekla Prednji oporni nogi na menjalniku Hidravlična zadnja podpora Zagozde za kolesa z nosilcem Stranska zaščita iz aluminija brez zaščite proti podvozu Zadnji blatniki čez celotno širino Blatniki pred vsako osjo in antispray-blatniki za vsako osjo Plastična orodjarna, z vmesno polico, š=620/v=360/g=440 mm, zaklepna z obešanko Pjdpfx Aezcv D Nshtjgn Razširitve izvlečne do 3.000 mm Sredinsko skladišče za lesene deske + lesene deske 70 mm za razširitev na 3.000 mm Privezne točke za nizkonosečo prikolico Vgrajeni obročasti d-vlečni nosilci v zunanjem okviru, vsak 5 t (možnost predelave v cevi za količke) Privezne gobice zgoraj in ob strani v zunanjem okviru, vsak 10 t Vleka centralnoose prikolice Vlečna roka s preizkušeno 50 mm vlečno zanko Osovine in vzmetenje Bobnaste zavore "Lasersko merjene osi/podvozje" - za zmanjšano obrabo pnevmatik in nižjo porabo goriva Zadnja os krmiljena, z avtomatsko blokado pri vzvratni vožnji prek vzvratnega svetila, dodatna blokada na vozilu prek ročnega gumba Zračno vzmetenje 1. os samodejno dvižna os, dodatno ročno spustljiva, upravljanje prek gumba na vozilu Dvig osi pod priporočeno vozno višino, zato ni jamstva za poškodbe pnevmatik Zavorni sistem Dvocevni zračni zavorni sistem, barvno označene cevi za lažje servisiranje Parkirno zavora z vzmetjo 2 nezamenljivi priključni glavi spredaj z povezovalnimi cevmi do vlečnega vozila EBS, Elektronski zavorni sistem z EBS priključkom spredaj, vključno s povezovalnim kablom Opozorilo: Priklopno vozilo sme vleči samo vlečno vozilo, ki zagotavlja delovanje ABS! Z dvigalno/spustnim ventilom Višina vozila v kombinaciji z dvižno osjo: ko je os dvignjena, se višina nakladalne oziroma skupne višine poveča za 50 mm Sistem za stabilnost vozila Trailer Infocenter za prikaz podatkov o vozilu, kot so obremenitev osi, prevožena kilometrina in diagnostična/sporočilna sporočila sistema Prepoznavanje obremenitve osi prek EBS-Canbus signala, prikaz na zaslonu v kabini voznika Kolesa in pnevmatike 235/75 R17,5, znamka po izbiri proizvajalca Jeklena platišča, tovarniško srebrna Električni sistem 24 voltov, večkomorni LED žarometi z uporom, stranske rumene LED luči, osvetlitev registrskih tablic v LED 2 bele pozicijske LED luči spredaj 2 bela/rdeča LED luči za ohranjanje pasu zadaj 2 x 7-polni izmenljivo varni vtiči spredaj s povezovalnim kablom Dodatni LED delovni reflektorji na zadku LED rotacijska luč z nosilcem Opozorilne table osvetljene z LED, izvlečne do 3.000 mm Tla potem 70 mm pod iz mehkega lesa, na območju blatnikov jeklena/rebrasta pločevina Zadnja zaokrožitev s 70 mm mehke lesene talne obloge Nizko nakladalna površina z zadnjo zaokrožitvijo 7.500 mm Nakladalne rampe Jeklene rampe dolžine 2.800 mm, širine 750 mm, bočno premične preoblečene z lesom Hidravlično prek stranskega izhoda pogonskega vozila z dušilko, upravljanje stransko na levi spredaj Hidravlično bočno premikanje nakladalnih ramp, možnost individualnega upravljanja Hidravlična povezava s SVK vtičem NW 10/3, vključno s povezovalno cevjo Rešitev za prevoz po meri

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 6.800 kg, največja dovoljena obremenitev: 28.200 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.000 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.200 mm, skupna širina: 2.550 mm, skupna višina: 2.645 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, Tailored Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown serves as an example. Production and equipment are customized to individual customer specifications. Chassis - Semi-Trailer for Freight Forwarding Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin, mounting positions for warning signs at the rear, outer frame with load-lock profile for lashing strap attachment, 24 t two-speed landing gear, single-sided operation, ferry lugs marked in yellow (two at the rear as towing eyes), container locks: 4 pairs of container lock fittings recessed in the floor for either 2 x 20-foot or 1 x 40-foot containers, stake pockets recessed in the outer frame (internal dimension 80 x 80 mm), central stake pockets recessed in the floor (internal dimension 80 x 80 mm), plug-in stanchions B=80 / D=80 / L=1200 mm, hot-dip galvanized, lashing eyes recessed into the outer frame (each rated at 5 t), 2 toolboxes approx. W=1,230 / H=450 mm, fully enclosed, mounted across the full width in front of the axles, replacing side underrun protection, foremost container lock as removable pin, lashing/stanchion rails transversely recessed in the floor across the full width up to the outer frame, approx. 100 mm high, 20 mm round steel rails, top and bottom, spacing between upper and lower rail approx. 60 mm, bottom finished with angle plate, half open downwards. For lashing and inserting 80 x 80 mm stanchions, open compartment for warning boards (as technically feasible). Axles & Suspension SAF disc brake axles (axle/chassis laser-aligned) to reduce tire wear and fuel consumption, air suspension, 1st axle is an automatic lift axle, including forced lowering and traction aid, activated by 'braking 3 times', 2 ride heights adjustable via hand control: - 1 x for coupling height 1120 mm - 1 x for coupling height 1200 mm Brake System 2-line compressed air brake system, color-coded piping for easy service, spring brake parking brake, 2 non-interchangeable connectors at the front, EBS (Electronic Brake System) with EBS socket at the front, with lift & lower valve, vehicle stability control system. Wheels and Tyres 385/65 R 22.5", steel rims, factory silver finish Electrics 24 Volt, 4 x 3-chamber tail lights, side LED marker lights (yellow), 2 white LED front position lights, 2 rear LED lane-keeping lights (white/red), 2 x 7-pin and 1 x 15-pin non-interchangeable front sockets, without supply cables Rotating beacon with holder, controlled via parking light (removable lamp) 2 pairs of double warning signs, LED-lit, extendable to 4,500 mm and removable with plug. Additional bracket at the rear Pgsdpfjzb Iu Dox Ahton Additional 7-pin socket (ISO 1724) on rear underrun protection Floor Phenolic plywood approx. 30 mm thick, cross joints with omega inserts, installed on longitudinal stringers, for high point load resistance (forklift axle load up to 7,100 kg max) Front Wall / Corner Posts 25 mm aluminium hollow section, 1,650 mm high, front corner posts in volume version steel Inside of front wall additionally lined with 1,250 mm high phenolic plywood "Crash-Blocker", inner lower section (approx. 140 mm high) with steel impact protection Storage compartment for 80 x 80 mm plug-in stanchions inside front wall Painting Frame: Hot-dip galvanized including passivation, or painted as per customer specification Landing gear feet: Black coated Front corner posts: Galvanized and painted to match front wall color Front wall:

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 7.200 kg, največja dovoljena obremenitev: 27.800 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, Customised transport solution Configure your Fliegl vehicle according to your specifications. The vehicle shown is an example. Production and equipment are tailored individually to customer requirements. Chassis – Semi-Trailer for Forwarding Companies High-tensile fine-grained steel welded construction in lightweight design, kingpin plate with replaceable 2'' kingpin, main frame reinforcement for 25 t capacity, centred over 3 m loading length when retracted. 13 pairs of welded lashing hooks on the cross members for securing straps 23 pairs of recessed lashing rings in the outer frame, each rated at 3.5 t Outer frame fitted with Load-Lock profile for strap attachment Note! Not usable with side boards! 24 t, two-speed landing gear, reinforced version for uncoupling under load, single-sided operation Wheel chocks with holders Aluminium side underrun protection Rear underrun guard Half-shell mudguards with anti-spray flaps according to EU regulations 1 spare wheel holder for 1 spare wheel, incl. wheel fixing kit 1 closed stanchion storage box, open at the top, fitted under the loading platform, doors on both sides, width=450 mm / height=400/420 mm / length=2460 mm 6 pairs of extendable stanchion sockets for 80x80 mm box-section stanchions, extendable from load width 2000 mm to 3100 mm 4 pairs of recessed stanchion sockets in the outer frame for 80x80 mm box-section stanchions 11 recessed stanchion sockets in the centre of the floor for 80x80 mm box-section stanchions, with reinforcement beams, installed between the outer stanchion sockets 5 x 3 pairs of stanchion sockets recessed into the outer longitudinal beams for 80x80 mm box-section stanchions, with reinforcement - for securing loads in the forward and rear direction during transport of reinforcing mesh, 2x5000 mm or 2x6000 mm 6 lightweight plug-in stanchions, W=80 / D=80, usable height approx. 1850 mm, hot-dip galvanised, with rope guide at the top for belt tensioning 12 lightweight plug-in stanchions, W=80 / D=80, usable height approx. 1850 mm, hot-dip galvanised, each with welded lashing ring at the bottom on both sides Note: Stanchion sockets/plug-in stanchions are not designed for sole load securing of long parts, pipes, etc. without lashing 2 plastic toolboxes with drawer and shelf, W=650 / H=520 / D=670 mm, lockable with padlock (padlock not included) 6 construction steel winches with wire rope and reverse hooks, with rope guide through outer frame, 1 removable plug-on gearbox for steel winches supplied loose Telescoping Main frame telescopic extendable by max. 4,000 mm and lockable at approx. every 500 mm Locking via pneumatic pin system + frame locking indicator on both sides, operated via hand button. Controls for brake/lock and suspension on front left (driver’s side) in front of the axles Storage compartment between the longitudinal beams when extended Axles & Suspension Pgedpfji Ri Szsx Ahten SAF disc brake axles, 430 mm disc diameter Last axle self-steering, with automatic reversing lock via reverse light, additional locking on vehicle via hand button and manually via switch in towing vehicle (Pin 10), without truck installation required Axle spacing offset Air suspension First axle with automatic lift function, additionally electrically operable from the truck, with start assist Braking System Dual-circuit compressed air braking system Colour-coded line routing for easy servicing Spring-loaded parking brake 2 foolproof coupling heads at the front EBS make at manufacturer’s choice, Electr

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT10401014064, lastna masa: 1.500 kg, največja dovoljena obremenitev: 2.300 kg, skupna masa: 3.800 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 1.000 mm, skupna dolžina: 4.300 mm, skupna širina: 2.460 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, barva: zelen, multiple units available Single-axle container trailer Type EPS 38 for diesel generator set installation Single-axle trailer chassis Fine-grained steel welded construction Mounting of the generator unit by bolting Front support wheel in reinforced design, mechanically length-adjustable and foldable downwards 1 pair of two-speed support legs at the rear, with straight base, can be operated separately left and right Wheel chocks with holder Side underrun protection, aluminium, painted RAL 6031 bronze green matte Rear underrun guard, steel, painted RAL 6031 bronze green matte Mudguards in front of and behind the axle, top covered with sheet metal with anti-spray mudflaps 2 pairs of lashing cutouts, one pair at the front and one pair at the rear recessed into the crossmembers, each with 3 t capacity for loading the trailer, with labeling (sticker) 4 pairs of ferry lashing eyes, marked yellow Lashing eye stickers at each lashing point Steel perforated plate with rosette profile" on both sides next to the generator set, pull-out ladder on both sides Mounting bracket for 2 x 20l fuel canisters on the vehicle frame FR-right Central lashing eye sticker Toolbox steel, recessed at the front into the floor with drain holes and lined with perforated rubber mat, lockable lid, lock not included Drawbar arrangement for single-axle trailer Drawbar with approved 40 mm swivel towing eye / NATO towing eye Drawbar height-adjustable via spindle. The nut for the spindle fastening screw is at FR-right bottom Parking sockets for electrics/EBS and air Axle + suspension BPW axles with tapered roller bearings and S-cam brakes "Axle/chassis laser-aligned" for reduced tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings Wheels and tires 235/75 R 17.5 manufacturer's choice Steel rims, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connector lines to tractor unit Yellow connection FR-left, red connection FR-right ABS/EBS, electronic braking system with EBS socket at front, with connection cable EBS modulator fitted in protected position Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Vehicle – driving stability system Electrics 24 volt, multi-chamber lights, side LED lighting in yellow Electrics to ADR specification with certificate 2 white front marker lights and reflectors, 2 white/red lane marking lights at rear 1 x 15-pin socket + 1 x 15-pin coil cable at the front, detachable Pedpfjzazrtex Ahtegn Approval / plates Country of registration: Germany with Dekra inspection and certificate (according to §13 EC-FGV) 24/7 service hotline prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, rear only, white Warning plate according to ECE-70 Paintwork Frame RAL 6031, bronze green matte Drawbar same color as frame Multiple units available

Stanje: rabljeno, največja dovoljena obremenitev: 28.410 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2012, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 700 mm, FLIEGEL polpriklopnik s stranicami in 3 osmi Nosilnost: 28.410 kg TIP: SDS350 Zavora: disk Os: BPW + zračno vzmetenje 2x podporna točka (JOST) Dolžina: 13,60 m Širina: 2,40 m Višina: 0,70 m Pgsdjwgghnopfx Ahtsn Z veseljem vam pomagamo tudi pri financiranju/leasingu v sodelovanju z našimi partnerji. Vse navedene informacije so brez jamstva. Pridržujemo si pravico do napak in vmesne prodaje.

Stanje: novo, največja dovoljena obremenitev: 13.200 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.500 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.550 mm, Gross vehicle weight: 18,000kg / 21,000kg Unladen weight: 4,800kg Payload: 13,200kg / 16,200kg Overall length: 9,450mm Load length: 7,500mm incl. rear bevel Width: 2,520mm Loading height: 860mm Additional information: - Chassis painted in stock colour Nova grey - Wooden floor 70 mm - Steel ramps, 2,800mm long x 750mm wide, laterally adjustable - With spring lift assistance - Foldable rear supports Psdpfx Aher Da Uvetsgn - Aluminium side underrun protection - Plastic toolbox - 3m widening package - Large lashing package – 5 pairs of ring lashing eyes recessed in the outer frame (convertible to stake pockets), each rated at 5 tonnes; 7 pairs of lashing mushrooms recessed on top and side of the outer frame, each rated at 10 tonnes - 50mm drawbar eye - Air suspension - Lift and lower valve - Axle load detection via EBS CAN bus signal - Tyres: 235/75R17.5 - 2 x 7-pin connectors at front - LED revolving beacon - 2 pairs of double warning boards, LED illuminated, extendable to 3m plus advance transport/setup from warehouse 26639 Wiesmoor: €1,280.00 net

Stanje: novo, največja dovoljena obremenitev: 30.010 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New vehicle: Fliegl 4-axle low-loader trailer with wheel recesses and split ramps, type VTS 400 RM Lease-purchase offer: Term 48 months, down payment only the VAT, residual value 40% Monthly rate: EUR 899.00 Vehicle / Body: Low-loader First registration: New vehicle Gross weight: 24,000 kg / 40,000 kg Unladen weight: 9,990 kg Payload: 14,010 kg / 30,010 kg Overall length: 12,000 mm Loading length: total approx. 10,000 mm, gooseneck approx. 2,850 mm, load area including rear bevel approx. 7,150 mm Width: 2,550 mm Loading height: 900 mm Further information Low-loader trailer chassis Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear supports Wheel chocks with holders Aluminum side underrun protection Rear spray flap across the entire width Half-shell mudguards on 1st and 2nd axle with anti-spray flaps behind each axle, anti-spray flap behind 4th axle Excavator arm recess above the rear axles, extending to the rear, approx. 1,800 mm long, approx. 650 mm wide, and approx. 150 mm deep 2 pairs of lashing holes (5 t each) in the excavator arm recess, lateral on the main frame approx. 300 mm from the front and approx. 200 mm before the rear bevel Spare wheel carrier for 1 spare wheel, upright on the gooseneck right at the front. Spare wheel, make identical to the main tires, steel rim Storage box recessed in the gooseneck floor with lid; dimensions W = 720 mm / L = 520 mm / D = 170 mm 1st pair of wheel recesses after the gooseneck, recessed in the low-bed lane area, ramped for entry, bottom length approx. 1,600 mm, depth approx. 400 mm. Note: Frame in the main beam area is 400 mm higher than the wheel recess 2nd pair of wheel recesses between the axles, recessed in the low-bed lane area, ramped for entry, bottom length approx. 600 mm, depth approx. 300 mm. Note: Frame in the main beam area is 300 mm higher than the wheel recess Extendable width up to 3,000 mm (not extendable in the rear bevel and not in the lower wheel recesses) (track width of the construction equipment or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden planks below the low-bed area 70 mm wooden planks for extension to 3,000 mm Lashing eyes on the low-loader 1 pair of lashing eyes, recessed in the front of the gooseneck, 5 t each 4 pairs of lashing holes in the outer frame, 5 t each (for lashing straps) 8 pairs of lashing rings, integrated on top and side of outer frame, 10 t each 2 at the front on the gooseneck 6 in the low bed First lashing point 250 mm from the front and last max. 250 mm from the rear, spacing between lashing points not greater than 1,100 mm 5 pairs of stake pockets integrated in the outer frame, inside 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) 1 pair of folding lashing eyes, additionally recessed in the floor, 10 t each 1 inside next to the main frame at the start of the low bed 2 pairs of additional folding lashing eyes, 10 t each Podpfetrizkex Ahtsgn 1 on the gooseneck (protrudes over edge) 1 behind last axle, recessed in floor Drawbar coupling / turntable trailer hitch Towing bar with certified 50 mm towing eye, towing eye inclined 8° D-value at least 160 kN Axles & suspension BPW drum brake axles "Axle/chassis laser alignment" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical front axle load equalization (rocker balance) Wheels and tires 235 / 75 R 17.5" Manufacturer's choi

Stanje: rabljeno, prva registracija: 09/2016, barva: drugo, Leto izdelave: 2016, Oprema: ABS, = Druge možnosti in oprema = - BPW osi - Dvižna os - Bobnaste zavore Pjdpfxsy Avafo Ahtjgn = Opombe = Fliegl, 2016, BPW osi, 1. os dvižna, bobnaste zavore = Podatki o podjetju = Bančni podatki: Račun pri Rabobank: 39.33.10.655 IBAN: NL73RABO0393310655 SWIFT koda: RABONL2U - Pred transakcijo vedno preverite naše bančne podatke! - Vozila ni možno rezervirati brez pologa. - Pridržujemo si pravico do napak pri pisanju in besedilu za vsa ponujena vozila.

Stanje: novo, lastna masa: 135 kg, največja dovoljena obremenitev: 615 kg, skupna masa: 750 kg, dolžina tovornega prostora: 2.050 mm, širina tovornega prostora: 1.095 mm, višina nakladalnega prostora: 300 mm, prostornina tovornega prostora: 0,7 m³, barva: drugo, gradbena višina: 805 mm, delovna širina: 1.545 mm, Manufacturer: Humbaur, Model: Tieflader Steely DK, Permissible Gross Weight: 750 kg, Payload: 615 kg, Unladen Weight: 135 kg, Cargo Bed Dimensions: 2050 x 1095 x 300 mm, Tyres: 13 inch, Loading Height: 495 mm, incl. 100 km/h approval, with foldable drawbar — allowing the trailer to be stored vertically against the garage wall. Features include: 13-pin connector, 9 mm floor panel, side walls made of hot-dip galvanised steel sheet, tailgate with tension locks, 4 lashing rings mounted on the inside walls, pre-installed buttons for tarpaulin fastening on side panels, Humbaur multifunction rear lighting integrated into underride guard, corner stanchions with insert slots, and foldable V-drawbar. Price includes vehicle registration certificate (registration certificate part II and COC papers). We stock a wide selection of trailers from Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, we supply a free temporary transit license plate. We service and repair trailers from all manufacturers. Additional accessories available on request. Technical changes, price changes, and errors excepted. No liability for errors or misprints. Specification highlights: torsion axle, independent suspension, hot-dip galvanised steel side walls, unbraked, includes warranty, 13-pin connector, 9 mm floor panel, tailgate with tension locks, 4 internal lashing rings, pre-installed tarpaulin buttons, integrated multifunction rear lighting (underrun protection), insertable corner stanchions, foldable V-drawbar. Pgedpfx Aeflw Scjhtjn

Stanje: rabljeno, lastna masa: 7.300 kg, največja dovoljena obremenitev: 37.700 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2019, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5 --/140J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 --/140J, velikost zadnje pnevmatike: 235/75R17,5 --/140J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Reinforced design, high bed length approx. 4,180 mm, low bed length approx. 9,400 mm, loading height approx. 900 mm, 12 stake pockets in the outer frame, 3 cross stake bars, 14 lashing eyes, 4 pairs of container locks for either 2 x 20 ft ISO containers or 1 x 40 ft ISO container, -- Subject to misprints, errors, and changes, sample images --, More data available at: !, More details: ! Psdezhk Hujpfx Ahtogn

Stanje: novo, lastna masa: 7.950 kg, največja dovoljena obremenitev: 37.050 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Ojačana izvedba, zračno ovješena s podiznom osovinom, mjerač osovinskog opterećenja, dužina visokog ležaja cca 4.140 mm, dužina niskog ležaja cca 8.600 mm, visina utovara cca 900 mm, za 2-osovinske i 3-osovinske tegljače, prednji zid cca 1.600 mm visine, 18 x džepovi za rukohvate u vanjskom okviru, 3 x poprečne letve za rukohvate, 24 x vezne ušice, 4 para kontejnerskih bravica za, 2 x 20 ft ISO kontejnera ili 1 x 40 ft ISO kontejner, doplata za alu rampe, cijena: 1.900 €; rezervni kotač, cijena: 300 €; – tiskarske greške, zadržavamo pravo na promjene i pogreške, slike su uzorak – više podataka na:!, više detalja:! Psdpozhk E Defx Ahtsgn

Stanje: novo, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.100 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, ABS, Zračno vzmetenje z možnostjo dviga in spusta, Tehtnice za obremenitev osi, Skupna dolžina nakladalne površine pribl.: 9.100 mm, Globoka postelja pribl.: 6.900 mm dolga, Višina nakladanja pod obremenitvijo pribl. 890 mm, 24 x pritrdilna ušesa po 10 t, 12 x žepov za kolike v zunanjem okviru, Plezalna letvica na zunanji strani ramp in zadnje poševnine, Dvodelne nakladalne rampe (pribl. 4.300 x 750 mm), Nakladalne rampe nastavljive vstran, Lesena tla debeline 68 mm, Skladiščna škatla s pokrovom za verige ali pritrdilne pasove, Označevanje obrisa po predpisih, Opozorilna rotacijska luč, Pomožna parkirna zavora z vzmetjo, Vklj. prikaz obremenitve osi, Vozilo pocinkano v potopni kopeli, Doplačilo za: Hidravlični premik ramp = cena: 1.000 €, -- Možne tiskarske napake, spremembe in napake so pridržane, vzorčne slike --, Več podatkov na: !, Več podrobnosti na: ! Pedpfxjzhf U Ho Ahtegn

Stanje: novo, lastna masa: 9.550 kg, največja dovoljena obremenitev: 30.450 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.100 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Air suspension with lift and lower function, axle load scales, total loading platform length approx. 9,100 mm, low bed approx. 6,900 mm long, loaded loading height approx. 890 mm, 24 lashing rings each rated at 10 t, 12 stake pockets in the outer frame, drive-on ramps (approx. 3,100 x 760 mm), climbing strip on the outside of the ramps and rear slope, ramps adjustable sideways, 68 mm thick wooden floor, storage box with lid for lashing chains or tension belts, contour marking according to regulations, revolving beacon, spring-applied parking brake, incl. axle load displays, vehicle hot-dip galvanized, surcharge for: hydraulic ramp shifting = Price: €1,000, -- Subject to errors, misprints and changes, sample images --, More data at: !, More details: ! Pgedpfx Aozhf N Rohtjn

Stanje: novo, lastna masa: 9.150 kg, največja dovoljena obremenitev: 30.850 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.100 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, ABS, zračno vzmetenje z dvigovanjem in spuščanjem, tehtnice za obremenitev osi, skupna dolžina tovorne površine ca: 9.100 mm, nizko ležišče ca: 6.900 mm dolgo, nakladalna višina obtežena ca. 890 mm, 24 x pritrdilnih ušes po 10 t, 12 x žepov za stebričke v zunanjem okvirju, nakladalne rampe (ca. 3.100 x 760 mm), stopničasta letev na zunanji strani ramp in zadnjega naklona, rampe bočno nastavljive, lesena tla debeline 68 mm, skladiščna škatla z pokrovom za pritrdilne verige ali pasove, označba obrisa po predpisih, rotacijska opozorilna luč, zavorni sistem s federnim pomnilnikom, vklj. z indikatorji obremenitev osi, vozilo vroče pocinkano v potopni kopeli, doplačilo za: hidravlično pomikanje ramp = cena: 1.000 €, -- napake v tisku, pomote in spremembe pridržane, slike so simbolične --, Več podatkov na: !, More Details: ! Pgedpszg Ttbsfx Ahten

Stanje: novo, lastna masa: 8.050 kg, največja dovoljena obremenitev: 36.950 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Vroče pocinkano, ojačana izvedba, zračno vzmetenje z dvigalno osjo, manometer za osno obremenitev, dolžina visokega ležišča cca 4.180 mm, dolžina nizkega ležišča cca 9.400 mm, višina nakladanja cca 900 mm, prednja stena cca 1.600 mm visoka, 14 rež za količke v zunanjem okviru, 3 prečne letev za količke, 24 pritrdilnih obročev, 4 pari zapiral za zabojnike za 2 x 20 ft. ISO zabojnika ali 1 x 40 ft. ISO zabojnik, doplačilo za alu rampe = cena: 1.900 €, -- tiskarske napake, pravica do sprememb in napak pridržana, vzorčne slike --, Več podatkov na: !, More Details: ! Pgedpfx Ahjzgvfaotsn