Schwarzmüller Polpriklopnik Z Odprto Ploščato Ploščadjo nakup rabljenega (28.532)

Stanje: rabljeno, največja dovoljena obremenitev: 36.910 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, prva registracija: 06/2020, Dimension B 11,450 mm Unladen weight 13,450 kg with air suspension, hydromechanical forced steering, single-extendable loading platform, STZ-L Gooseneck - robust steel welded construction - formed loading platform 4,000 mm x 2,480 mm - rear articulation radius 2,400 mm - fifth-wheel load 18,000 kg - chamfered - hydromechanical forced steering (dual-circuit steering) in low-profile design (construction height 235 mm) with adjustable guide elements - slewing ring-mounted fifth-wheel plate with replaceable 2" king pin and adjustable steering wedge - mechanical landing legs Loading platform - single telescopic, designed as an external-internal tube construction with 700 mm long fixed front deck section - locking of extension stages by spring-loaded cylinders - 300 mm long sliding table Chassis - air-suspended 4-axle chassis, - BPW axle assembly (Eco), consisting of one rigid axle and three hydromechanically forced-steered axles - axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - lifting and lowering valve as standard - 1 axle liftable Rear of vehicle - straight construction - short 1,100 mm rear overhang from centre of last axle - drop pipe support at rear Ppedpoyxcnzsfx Aaper Brake system - 2-line full air brake system with diaphragm brake cylinders - automatic load-dependent braking (ALB) - automatic slack adjusters (AGS) - parking brake via spring-loaded cylinders - ABV brake Special equipment - extendable width extensions - "BekaMax" central lubrication system - all available lashing rings installed - lift option (load-dependent) for 1st axle - radio remote control - stanchion rails Technical data Gooseneck Loading platform (LxW): 4,000 x 2,480 mm incl. Wirtgen slope Construction height over fifth wheel: 235 mm Fifth wheel height loaded: 1,275 mm Loading platform Platform (LxW): 8,500 mm x 2,550 mm Telescopic by 5,800 mm up to 14,300 mm Platform height loaded: 755 mm (+140/-60 mm) 2nd drive position: 805 mm (+/-100 mm) Steering 1st axle liftable 2nd to 4th axle hydromechanically forced-steered (dual-circuit steering)

Stanje: novo, največja dovoljena obremenitev: 86.300 kg, skupna masa: 110.000 kg, konfiguracija osi: 3 osi, with BPW axles 12 t, hydraulic suspension, hydromechanical forced steering, single-extendable loading platform type, with 2-piece access ramps Unladen weight: 23,700 kg Payload: 86,300 kg Length: 15,620 – 24,920 mm STZ-L Gooseneck - Front corners chamfered at 45° (468 x 468 mm), closed outer frame - Robust steel and welded construction - Designed loading platform 3,700 x 2,480 mm - Hydromechanical forced steering (dual circuit steering) in flat-bed design (overall height 235 mm) with adjustable guide elements - Ball bearing turntable mounting plate with interchangeable 3.5" king pin and adjustable steering wedge - Fifth wheel load: 26,000 kg - Maximum steering radius: 2,800 mm - Comfort storage box Loading Platform - Design: "single telescopic platform" - Traffidecko polymer rubber covering - Loading area single-extendable, executed as an outer-inner tube construction - Locking of extension stages via spring-loaded cylinders and locking pins - Fixed front bearing 700 mm length - Intermediate table 300 mm Chassis - 7-axle chassis with hydraulic suspension, axle spacing 1,510 mm - BPW axle assembly, consisting of one non-steered axle and six hydromechanically forced steered axle units with a maximum steering angle of 45° - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Ride height: 890 mm +170 mm/-90 mm - Chassis with open outer frame Vehicle Rear End - Design: "chamfered 500 mm" - 2 integrated drop leg supports for stabilizing the vehicle rear during loading operations 2-piece access ramps with Super Grip surface, 50,000 kg - 2,600 + 1,200 x 720 mm - Hydraulic lifting unit with hand pump, cable actuation - Hydraulic ramp adjustment Brake System - Dual line full air braking system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABV brake system - Hydraulic connection - easyControl - Aluminum sideboards, three-sided - Lift function for 2 axles - Central lubrication system "BEKA-MAX" - Electric power unit - Extending width adjusters incl. infill boards, width extendable telescopically to 3,390 mm Technical Data Gooseneck Loading platform (L x W): 3,700 x 2,480 mm Chamfer: 1,080 mm Build height above fifth-wheel: 235 mm Fifth-wheel height (laden): 1,300 mm Steering clearance rear: 2,800 mm Steering clearance front: 1,300 mm King pin: 3.5" Loading Platform Loading platform (L x W): 12,500 x 2,750 mm Telescopically extendable by 9,300 mm Incrementally up to (L x W): 21,800 x 2,750 mm Width extendable up to 3,390 mm Ppsdpoyxcn Ijfx Aapjr Rear chamfer included: 500 mm Loading height (laden): approx. 890 mm Chassis Axle spacing: 6 x 1,510 mm Rear overhang: 1,100 mm Steering 1st axle non-steered 2nd – 7th axles hydromechanically forced steered (dual-circuit steering)

Stanje: novo, največja dovoljena obremenitev: 38.000 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.000 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.540 mm, skupna višina: 3.780 mm, Leto izdelave: 2025, Oprema: ABS, * Humbaur HTS 30 K * Heavy-Duty Semi-Trailer * Lowbed Trailer * NEW * Immediately available * Fully galvanized * Robust construction * Overall dimensions: 12,630mm x 2,540mm x 3,780mm * Internal dimensions: 12,000mm x 2,540mm * Loading height: 890mm * Fifth wheel height: 1,230mm * Fifth wheel platform: 3,500mm * Lowbed: 8,680mm Ppodpfsr Ic Rwjx Aapsr * Gross weight: 48,000kg * Payload: 38,000kg * Tyres: 235/75R17.5 * SAF lowbed axles with lift and trailing steering axle * Air suspension with raise and lower function * Twin tires * EBS braking system * 24-volt lighting system * LED side marker lights * Wabco Smart Board * 2-inch king pin * Chassis frame hot-dip galvanized by immersion * Heavy-duty, welded chassis frame * Climbing strips on the approach ramp * 50mm softwood floor * Recess for excavator arm storage * 3m equipment package * Steel toolbox under loading area * Gooseneck with 400mm front wall * 400mm aluminium side wall, foldable * Front storage box with lid * 3 pairs of 6t lashing rings * 3 pairs of 3t lashing rings * 5 pairs of 10t lashing rings * 6 pairs of 3t lashing rings * 6 pairs of 2t lashing rings * Ramps with rubber surface * Spare wheel with holder on the front bulkhead * LED reversing lights * Painted visible surfaces upon request * Further equipment options available upon consultation ATTENTION!!!!! MUST READ!!!!! We expressly reserve the right to prior sale, as we also offer this item on other platforms. We strongly recommend viewing and inspection to prevent any misconceptions for the buyer regarding condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged!!! The specified internal dimensions are approximate values. TRADE-INS POSSIBLE FOR ALMOST EVERYTHING!!! EXCHANGE DEALS AND ADDITIONAL PAYMENT POSSIBLE!!! Exhibition location: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday – Friday 8.00 am to 5.00 pm, Saturday 8.00 am to 2.00 pm Over 500 new and used trailers always in stock!!! Tel.: Fax:

Stanje: rabljeno, lastna masa: 8.980 kg, največja dovoljena obremenitev: 24.020 kg, skupna masa: 33.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2005, naslednji pregled (TÜV): 07/2025, skupna dolžina: 2.600 mm, skupna širina: 4.000 mm, skupna višina: 13.970 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, | Menci freezer trailer | Meat refrigeration unit | Overhead rail system | BPW axles, first axle lift | Permissible axle load: 24,020 kg | Lift axle, BPW | Carrier 1800 refrigeration unit | Diesel operating hours: 5,730 h | Jost landing gear with lateral compensation Ppedpeymn S Tefx Aaper

Stanje: novo, lastna masa: 13.850 kg, največja dovoljena obremenitev: 31.150 kg, skupna masa: 45.000 kg, konfiguracija osi: 2 osi, dovoljena osna obremenitev (os 1): 12.000 kg, dovoljena osna obremenitev (os 2): 12.000 kg, dolžina tovornega prostora: 6.800 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 300 mm, velikost pnevmatike: 245/70 R 17,5, barva: črn, Oprema: ABS, Gooseneck: - Hydraulically detachable gooseneck with external main frame featuring integrated steering pick-up and individually operated push-off cylinders - Integrated hydraulic cylinders and support arms for coupling and uncoupling the lowbed deck - Piping connections to the lowbed, mounted on the inside of the main frame at the gooseneck kink - Bracket for locking pins Lowbed, extendable: - Frame pre-tensioning adapted for the maximum payload, reduced payload in the telescoped positions - Prepared for the installation of load area wideners - Telescoping stages approx. every 500 mm + container positions - 7 pairs of swivelling lashing rings, 13,400 daN lashing capacity - 5 pairs of stake pockets 100x50 mm in the outer frame - 3 pairs of M36 threaded bushings on the outside of the telescopic frame for screwing in lashing brackets - 1 pair of M36 threaded bushings on the inside of the telescopic frame for screwing in lashing brackets - Prepared for the installation of container locks Psdpfx Aasy Dqkhepspr - Adapter without pin-tab coupling: 2 pairs of 13,400 daN lashing rings welded on the adapter facing the lowbed; 1 pair on the outer adapter; 1 pair on the inner adapter - 45 mm spruce plank flooring between the flatbed frame sections Chassis, drive-over type: - Steel welded construction in compact design with open excavator trough at the rear - Kink to lowbed at 90°, with 2 pairs of holes at the front and rear of the chassis platform for hanging loading ramps using locking pins - Different track widths can be set using 2 different holes - Welded smooth steel floor above the axles with anti-slip coating, max. 5,000 kg axle load - End beam with cutouts for lights, designed as underrun protection according to ECE R58-003 - Valves and electrical distribution protected, installed in the double floor Axles, suspension, and tires: - DOLL tera pendle axle technology with hydraulically suspended GIGANT pendle axles - All axles rated at 12 t, with ABS and AGS (automatic slack adjuster) - All axles hydraulically steered, with max. 60° steering angle on the rearmost axle - Use of low-maintenance bearing points in the steering area - All lubrication points connected to the central lubrication system - Lift axle / jack function, a locking pin is supplied for each axle to allow axle lifting - DOLL tera pendle axle with hydraulic suspension and damping elements - Lifting and lowering device with 600 mm total stroke (-70/+530) - Hydraulic dual-circuit displacement steering system - Steering pick-up at the king pin plate, mounted on a turntable - Transmission of steering angles via a tie rod to the front master cylinders - Rear slave cylinders transfer the front steering angles via solid steering rods to the steering axles - All valves are centrally mounted on a control block - Axle load indicator via manometer on the side - Steering pressure monitoring - Tire pressure monitoring system - Tires: 245/70 R 17.5 Accessories included: - Steel front wall with spare wheel holder, bolted, 520 mm high, hot-dip galvanized - Side and rear panels, insertable, approx. 400 mm high, anodized - Two central lubrication systems BEKAMAX - DOLL Tronic - CAN-Bus system - Support arms for coupling and uncoupling the lowbed deck - Fifth wheel plate with integrated steering pick-up, steering wedge, and 2'' king pin to accommodate the trailer - Gooseneck cylinders for coupling and uncoupling the lowbed deck - 6-way hydraulic coupling with pressure relief valve for easy disconnection of hydraul

Stanje: rabljeno, največja dovoljena obremenitev: 37.420 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2015, dolžina tovornega prostora: 16.900 mm, širina tovornega prostora: 2.540 mm, skupna širina: 2.540 mm, skupna višina: 3.000 mm, Leto izdelave: 2015, Oprema: ABS, HRD SPTM4A Mega Telescopic Semi-Trailer Serial number: W09SPTM4NFEN10031 First registration: 24-03-2015 SAF axles Lifting axle 2 steering trailing axles Drum brakes with ABS and EBS Air suspension Tyres: 235/75 R17.5, 40% Gross weight: 48,000 kg, tare weight: 10,420 kg, payload: 37,420 kg Ppedpoxzmgwofx Aapjr Total loading length: 1,290 cm + 400 cm extendable Loading floor height: 95 cm Aluminum loading ramps Total trailer length: 13.30 m, width 2.54 m, height 3.00 m Container twist locks for 2x20 ft, 1x40 ft, 1x 20 ft in the middle Lashing rings Stake pockets Subject to errors, omissions, and prior sale.

Stanje: rabljeno, največja dovoljena obremenitev: 24.640 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2009, dolžina tovornega prostora: 12.100 mm, širina tovornega prostora: 3.000 mm, skupna širina: 2.550 mm, Leto izdelave: 2009, Oprema: ABS, Doll T2H-S3 excavator bed low loader with detachable gooseneck First registration, BPW Eco axles Hydraulically steered with radio remote control Air suspension Drum brakes with ABS and EBS Tyres: 245/70 R17.5 approx. 35% Gross weight: 38,000 kg, unladen weight: 13,360 kg, payload: 24,640 kg Maximum deck length: 670 + 540 cm Gooseneck: 405 cm Rear section: 275 cm Width: 255 + 2x30 cm Low bed height: 46 cm Loading height rear: 94 cm Excavator trough. Ppjdpfeyi Nm Dsx Aapsr Errors/mistakes and prior sale reserved.

Stanje: novo, največja dovoljena obremenitev: 87.500 kg, skupna masa: 120.000 kg, konfiguracija osi: 3 osi, Type STZ-VP 8 (245) (3+5) with pendulum axles The technical data provided are only valid when used with a 4-axle tractor unit with the following specifications: Dimension a: 5,400 mm Fifth wheel height (laden): 1,300 mm Weights - Speed: 80 km/h Fifth wheel load: 22,000 kg - 30,000 kg Axle load: 8 x 12,000 kg Gross vehicle weight: 120,000 kg Curb weight: approx. 32,500 kg Payload: approx. 87,500 kg (depending on the load chart / easyLOAD calculation) Dimensions - Dimension b: 21,990 mm – 26,490 mm total train length Vehicle width: 2,750 – 3,000 mm Gooseneck length x width: 3,700 mm x 2,480 mm Fifth wheel height (laden): 1,300 mm Steering radius front / rear: 1,370 mm / 2,835 mm King pin: 3.5'' Front 3-axle bogie Ppodpfx Ajwc Inhsapsr Wheelbase: 2 x 1,510 mm Single tires Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S Steering axle configuration: counter-steered Excavator trough: single-extendable Length x width: 7,000 mm x 3,000 mm Extendable by/up to max. 4,500 mm / 11,500 mm Construction height: 450 mm Load height when loaded: approx. 600 mm with 150 mm ground clearance Stick width: 1,350 mm Mattresses and outriggers removable Rear 5-axle bogie Wheelbase: 4 x 1,510 mm Single tires Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S Steering axle configuration: forced steering Radio remote control

Stanje: novo, največja dovoljena obremenitev: 31.400 kg, skupna masa: 45.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.700 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 300 mm, Leto izdelave: 2026, Oprema: ABS, DOLL NEXT DOLL Tiefbett tera T2P-S3FS21 – 2-achsiger Tieflader aus der kurzfristig verfügbaren rapid-Serie der DOLL Fahrzeugbau GmbH aus Oppenau – aus dem Herzen des Schwarzwaldes. Ideal für den anspruchsvollen Einsatz im harten Off-Road-Bereich, schwierigem Gelände sowie im täglichen Baustellenbetrieb. Je nach Verfügbarkeit sehr schnelle Lieferung und sofort einsatzbereit dank der DOLL-rapid-Serienfertigung. Individuell konfigurierbar nach Ihren Wünschen und Anforderungen. Technische Daten * Zulässiges Gesamtgewicht: 45.000 kg * Eigengewicht: ca. 13.600 kg – Nutzlast: ca. 31.400 kg * Fahrwerk: 2x 12-t-Pendelachsen * Tiefbett teleskopierbar * Fahrzeugbreite: 2.550 mm * Ladehöhe (beladen): 300 mm * Radstand: 1.360 mm Psdsyytm Rjpfx Aapepr Ausstattungsmerkmale * Abfahrbarer Schwanenhals für deutlich erleichtertes und schnelleres Be- sowie Entladen * Leichtgängige Teleskopierung für effizientes Handling * Hochwertige Spritzverzinkung – optimaler Korrosionsschutz und reduzierte Standzeiten * Pulverbeschichtete und feuerverzinkte Anbauteile – robust, langlebig und rostfrei Ihre Vorteile auf einen Blick * Schnelle Verfügbarkeit * Robust & zuverlässig – bewährte Technik, auch unter schwierigen Bedingungen ideal * Made in Germany – gefertigt bei DOLL Fahrzeugbau, Oppenau – über 145 Jahre Erfahrung im hochwertigen Fahrzeugbau Smarte Technologien Unser innovativer Ansatz vereint höchste Qualität, Leistung und Wirtschaftlichkeit. Die stetig steigende Nachfrage nach unseren Tiefbett-Sattelaufliegern treibt die konsequente Weiterentwicklung modernster Technologien in der Serienfertigung voran. Kontakt & Standort Hergestellt von DOLL Fahrzeugbau GmbH, Industriestraße 13, 77728 Oppenau (Hauptsitz und Produktionsstandort) * Die Fahrzeuge können je nach Kundenstandort direkt im Werk oder bei ausgewählten Referenzkunden deutschlandweit zusammen mit einem Außendienstmitarbeiter präsentiert werden.

Stanje: novo, največja dovoljena obremenitev: 44.400 kg, skupna masa: 61.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.500 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 300 mm, Leto izdelave: 2026, Oprema: ABS, DOLL NEXT DOLL Tiefbett tera T3P-S3FS25 – 3-axle low-bed trailer from the rapidly available rapid series from DOLL Fahrzeugbau GmbH, Oppenau – from the heart of the Black Forest. Ideal for demanding operations in tough off-road conditions, challenging terrain, and for daily use on construction sites. Depending on availability, very fast delivery and ready for immediate deployment thanks to DOLL's rapid series production. Individually configurable according to your requirements and specifications. Technical Data * Permissible gross vehicle weight: 61,000 kg * Unladen weight: approx. 16,600 kg – Payload: approx. 44,400 kg * Running gear: 3x 12t pendulum axles * Extendable low-bed Pjdpfx Aoyytnboapepr * Vehicle width: 2,550 mm * Loading height (loaded): 300 mm * Wheelbase: 1,360 mm Equipment Features * Detachable gooseneck enables much easier and faster loading and unloading * Smooth telescopic extension for efficient handling * High-quality hot-spray galvanization – for optimal corrosion protection and reduced downtime * Powder-coated and hot-dip galvanized accessories – robust and durable – no rust Your Benefits at a Glance * Fast availability * Robust & reliable – proven technology, also ideal in challenging conditions * Made in Germany – manufactured by DOLL Fahrzeugbau, Oppenau – a company with over 145 years' experience in premium vehicle construction Smart Technologies Our innovative approach combines quality, performance, and cost-effectiveness at the highest level. The constantly increasing demand for our low-bed semi-trailers drives the continuous further development of state-of-the-art technologies in series production. Contact & Location Manufactured by DOLL Fahrzeugbau GmbH, Industriestraße 13, 77728 Oppenau (Headquarters and production site) * Depending on the customer's location, vehicles can be demonstrated directly at the factory or at selected reference customers throughout Germany together with a field sales colleague.

Stanje: novo, največja dovoljena obremenitev: 35.450 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.740 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 3.500 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer K.SLA_RJ 3 / 1N ? 18/24 | Low Loader | Extendable | Wheel Wells | Ramps | 3 Axles Low gooseneck height, small tires! 770 mm loading height Manufacturer: Kässbohrer Model: K.SLA_RJ 3 / 1N ? 18 / 24 Vehicle type: Extendable jumbo low loader with wheel wells Registration country: Germany Year of manufacture: 2026 Color: RAL 3020 Traffic Red ----Technical Data Dimensions * External length: 13,190 mm * Platform length: 9,240 mm * Extension: 3,500 mm * Gooseneck length: 3,950 mm * Platform height: 770 mm * Fifth wheel height: 1,150 mm * Total width: 2,550 mm + 600 mm side extension * Wheelbase: 7,800 mm * Axle spacing: 2,260 mm * Locking position: 500 mm * Rear swing door: 2,300 mm ----Weights * Tare weight: approx. 12,556 kg * Permissible total weight (80 km/h): 48,000 kg * Permissible total weight (60 km/h): 52,800 kg * Axle load: 24,000 kg * Axle capacity: 8,000 kg per axle * King pin load capacity: 15,000 kg ----Chassis / Axles * 3 BPW axles * Air suspension * 2 rigid front axles * 1 trailing rear axle * Lifting axle on 1st axle (load-dependent) * Automatic axle lifting control from tractor unit * Air suspension with load gauge * ECAS electronic air suspension system ----Braking System / Electrics Ppodpfoyrkpxox Aapor * WABCO EBS 4S/3M * ABS * RSS roll stability support * Electro-pneumatic dual-circuit braking system * Lighting as per ECE R48 * Aspöck lighting system * Sockets: * 24N (ISO 1185) * 24S (ISO 3731) * 15-pin ADR (ISO 12098) ----Wheels / Tires * Tire size: 205/65 R17.5 * 12 wheels * Steel rims * M+S tires * 3PMSF winter tires * Tire pressure monitoring system * Spare wheel holder on front wall ----Chassis / Superstructure * High strength S700 MC steel chassis * 2" king pin (bolted) * Gooseneck with 90° vertical corners * Partial metallization Zn/Al corrosion protection * 45 mm hardwood floor * Tread plate over wheels ----Loading Platform / Extensions * Side extension up to 300 mm * 100x100 box profile pockets * Galvanized steel extensions * Hardwood extension boards (3 × 100 mm) * Storage box for extension boards ----Wheel Wells / Excavator Trough * Wheel wells for vehicle transport * Excavator trough at rear * Width: 750 mm * Depth: 310 mm * Length: 3,000 mm * Wheel well bridges made of hardwood ----Ramps * Foldable drive-on ramps * Ramp capacity: 40 t * Ramp length: 2,750 mm * Ramp width: 850 mm * Hydraulic sliding system * Ramp floor made of hardwood * Ramp securing with tension chain ----Load Securing Lashing points: * Gooseneck: 2 × 2 pcs 5 t, 1 × 2 pcs 10 t * Outer platform: 3 × 2 pcs 5 t, 4 × 2 pcs 10 t * Below outer frame: 2 × 2 pcs 8 t * Platform: 4 × 2 pcs 6 t * Further securing: * 5 × 2 stake pockets * 3 × 2 stake row pockets * 8 × 2 plug-in stakes * Container locks for 20 ft / 30 ft containers ----Equipment / Accessories * Toolbox (700 × 400 × 360 mm) * Rotating beacon * Rear work light * Extendable warning panels with LED * Side marking tape * Rear marking tape * Wheel chocks * WABCO Smartboard * Power cable (NATO socket) For further information, please feel free to contact us.

Stanje: novo, največja dovoljena obremenitev: 40.320 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Selection of equipment. Complete specification available on request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick. Loading area with 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Landing Gear: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * 205/65 R17.5 tyres – manufacturer of our choice TPMS: * TPMS tyre pressure monitoring system in accordance with ECE R 141 Axles: * BPW axles, two rigid and two self-steering axles * Air suspension with lift/lower function * Drum brakes * Self-steering axles with electromagnetic reversing lock, activated via reverse gear or manually Brake system: * WABCO brake system compliant with EU regulations and EBS-E (4S3M) Electrical system: * Electrical system according to EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with indicator * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: * Steel structure made of high-strength fine grain steel * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimal corrosion protection * Trailer colour RAL 3002 Carmine Red * Rims Silver Grey * Tarp RAL 9006 (brilliant direct) Ppodpfx Aaey Aug Dspjr Options included: * At the gooseneck and at the rear, left and right, one bracket each for warning signs, including socket * 2-inch king pin * One galvanized steel front wall * Yellow-red air couplings at the galvanized front connection strip * 4 wheel chocks with holder on the front wall * 3 tiers of wooden boards * Galvanized folding supports under the loading area bevel * One bracket for a revolving warning light at the rear end of the trailer * Height-adjustable curtain structure – approx. 3,960 mm? * Galvanized front wall with tensioning mechanism for sliding curtains. Height adjustable by approx. 400 mm * Roof brand EDSCHA, can be slid forward on ALU roof profile beams (bolted to front and rear wall) * 3 pairs of movable stanchions in the loading area * Body hydraulically extendable to the left and right at the rear by approx. 750 mm * Sliding roof with fold-up portal beam * Sliding tarp with 700 mm reserve in length; tie-down straps at approx. 600 mm intervals. Height upper edge of body approx. 3,960 mm (loaded) * Driving with the sliding roof open is not permitted and will damage the tarp * Body at the rear closed with anodized ALU swing doors * Latch-on rail for ALU loading ramps at the rear of the vehicle * Control valves for hydraulic widening fitted to the right-hand side of the trailer * White reflective tape as per EU regulations on the sides, red at the rear * Electro-hydraulic unit under the rear loading area * One mudguard at the rear of the trailer * European reflective signs (red-yellow) at the rear of the trailer * Hand…

Stanje: novo, največja dovoljena obremenitev: 36.410 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including vehicles available immediately or at short notice, can be found on our website. Excerpt from the equipment. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design to optimize load bed length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front bulkhead, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electric-hydraulic unit for hydraulic operations, excluding hydraulic winches * Approx. 40 mm thick hardwood cover above the gooseneck * 2-inch kingpin * Guide plate from the gooseneck for the fifth-wheel plate, approx. 500 mm wide * Receptacle at the rear of the gooseneck for aluminum drive-on ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the bulkhead * 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inner chassis rail) EQUIPMENT: * Load bed approx. 8,800 mm long, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * Recess in the load bed including the rear slope to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, with protected supply lines inside the extendable beams, automatically adapting to the respective load bed length * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steering-following * 3rd axle with electromagnetic reverse lock, activating via reverse gear or manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve Pedpfoy Auh Isx Aapopr * 235/75 R 17.5 3PMSF twin tires. Make at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous and between-axle interrupted approx. 50 mm hardwood planking on load bed (increasing coefficient of friction) * 1 cross table, approx. 300 mm wide, for the extendable tube with large cross-section; cross table with offset load bed and extendable mounting rails for aluminum bridging elements * Load bed locking with conically welded locking profiles every approx. 250 mm, including pretensioning plate * 1 pair of lashing rings on front crossbeam (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck crossbeam, approx. 700 x 410 mm (W x D) * Wheel recesses with approx. 15 x 15 mm square climbing strips and widened sections at the lower area (if vehicle is fitted with extendable widenings) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load bed between 1st and 2nd axle * Wheel recesses with approx. 15 x 15 mm square climbing strips and widenings in lower area * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, can also be used as widening planks (if vehicle is fitted with extendable widenings) * Aluminum elements lockable on the extension beams of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasted and painted in single color according to RAL code

Stanje: novo, največja dovoljena obremenitev: 36.590 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including units available immediately and at short notice, on our website. Ppodpfx Aaoy Auifspsr Excerpt from equipment specifications. Complete equipment list available on request. Neck: * Gooseneck with front corners chamfered approx. 45° and rear bevel approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Area: * Extendable loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of fold-out external lashing rings (LC 5,000 daN) * 3 pairs of fold-out external lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Cut-outs in the external frame of the loading area for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate over the axles Tyres: * Tyres 245/70 R 17.5 3PMSF – brand at our discretion. Load index (146/146F) TPMS: * TPMS tyre pressure monitoring system compliant with ECE R 141. Data transfer to the tractor unit via the standardised EBS interface according to ISO 11992. For correct display, the tractor unit must support receiving and displaying this data. Landing Legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, all axles hydromechanically forced-steered * Technical axle load: 12,000 kg per axle * Air suspension with lifting / lowering valve * Axle tool Brake System: * WABCO brake system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Steel Construction: * Steel structure made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical System: * Electrical system according to EU regulations, 24V lighting ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX at the front connection rail with sockets 24N, 24S & 15 pin. Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure is automatically shot-blasted with a centrifugal blasting machine after welding * Second sandblasting with corundum for optimal adhesion of the coating system * Final paint with 2 coats of 2K topcoat, single colour in RAL 3002 carmine red, according to RAL system 841GL * Rims in silver grey * Rear section metallised and painted in RAL 9010 (pure white) Accessories: * 2-inch king pin * One galvanised steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanised front connection rail * Spare wheel holder in front of the front wall (without spare wheel) * Electro-hydraulic power pack * Remote steering front and rear via cable remote control using push buttons, with single-track monitoring of the axles (without installation in the tractor unit) * Mounting rail for aluminium ramps at the gooseneck with integrated collision protection * Gooseneck and rear plate each fitted left and right with a bracket for warning boards incl. socket * Bracket for a rotating beacon at the rear of the trailer * Galvanised folding supports beneath the loading area’s rear bevel * 1 pair of recessed lashing rings along the central beam at the rear in the bevel (LC 10,000 daN) * Load gauge for determining axle loads including load diagram * Sanded coating applied to the checker plates on the gooseneck and loading area for slip resistance * Gooseneck fitted with plug-in aluminium side and rear panels, approx. 2,440 x 400

Stanje: novo, največja dovoljena obremenitev: 58.860 kg, skupna masa: 73.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specification available on request. Ppodpfx Aasy Augwoper Gooseneck: * Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring, approx. 30 mm thick Extendable loading platform: * Extendable loading platform with rear chamfer approx. 500 mm x 8° * 8 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching tensioning straps (LC 2,000 daN) * Hardwood flooring, approx. 48 mm thick; checker plate flooring over the axles Two-piece steel ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 900 mm, with Super Grip rubber coating * Ramp with hydraulically folding and unfolding ramp sections * Hydraulic lifting mechanism, hydraulically adjustable * Maximum load per pair: 50,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not need to be included in the overall vehicle length of 16,500 mm when in driving position Axles: * BPW axles and suspension, 1st axle with steering, 2nd and 3rd rigid, 4th and 5th axles trailing-steered, air suspension, with raise/lower function, drum brakes * Trailing steering axles with electromagnetic reverse lock, activated via reverse gear or manually * Technical axle load: 12,000 kg each Tyres: * Tyres 235/75 R 17.5 3PMSF – make of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck via standardized EBS interface according to ISO 11992. For correct display, the truck must be capable of receiving and displaying this data Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Brake system: * Wabco brake system in compliance with EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Steel structure: * Steel structure made from high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure automatically shot blasted after welding with a blast wheel system * Second blasting treatment with corundum for optimum adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final paint finish with two coats of 2K topcoat, single color in RAL 3002 carmine red according to RAL system 841GL * Rear section metallized and painted in RAL 9010 (pure white) Including the following additional equipment: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * A spare wheel carrier in front of the front wall * Yellow-red air couplings at the galvanized front connection strip * A bracket for a rotating beacon at the rear of the trailer * Galvanized supports under the chamfered section of the loading platform * Super Grip 2 rubber coati

Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Excerpt from the equipment: Complete equipment details available upon request. GOOSENECK: * Gooseneck in SNT design to optimize the loading platform length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 6° * For tractor units: 4 x 2 and 6 x 2 * ASPÖCK UNIBOX * Grating surface with 5 mm steel plate reinforcement on the gooseneck and rear chamfer * 2-inch kingpin * Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide * Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917) * On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized * 1 LED work light mounted top left and right on the front wall, wired to the connection strip for the tractor LOADING AREA: * Loading area approx. 9,600 mm long, rear chamfer approx. 900 mm x 6° * Loading area behind gooseneck hydraulically liftable and lowerable, approx. 3,000 mm, loadable up to approx. 9,000 kg * Continuous grating surface with 5 mm steel plate reinforcement on lifting bed and loading area, rated for point loads TYRES: 235/75 R 17.5 3PMSF twin tyres. Brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141 AXLES: * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steered * 3rd axle with electromagnetic reverse lock, can be activated by reverse gear or manually * 1st axle with start-up aid * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Pjdpfxjy Auhho Aapepr HYDRAULIC LOADING RAMPS: * 1 pair of two-part AXS steel ramps with grating surface, approx. 4,920 mm long, approx. 900 mm wide * Hydraulically folding ramp tips * Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 365 mm inward * Flashing beacons on the outer edge of the ramp tips, switch located next to ramp control * Ramp locking in driving position via quick-release * Sand coating painted on external frame of the ramp and on the ramp tip * Mechanical lateral drop leg supports in the ramps for docking to unloading ramps * Hydraulic ramp control valves on the right side of the vehicle BRAKE SYSTEM: WABCO EBS-E brake system according to EU regulations SURFACE TREATMENT: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection PAINTWORK: * Trailer carmine red (RAL 3002) * Wheels silver grey * Sideboards natural aluminium * Wheel hubs according to axle manufacturer * Light panel pure white (RAL 9010) EQUIPMENT: * Front wall made of steel, removable, approx. 1,600 mm high, incl. connection strip for supply lines to the tractor, mounted approx. 1,000 mm from the lower edge of the outer frame * Lashing chain attachment points on inner left/right of the front wall, incl. Alu tray underneath left/right for storing chains or straps * Behind the front wall screwed-on DELIGNIT panel (approx. 12 mm thick) * 2 additional pairs of bolted lashing rings (LC 5,000 daN) * Electric cable winch, approx. 5,400 kg pulling force, with radio remote control. Steel rope approx. 24 m long, rope ø approx. 9.5 mm, incl. rope presser roller * Deflection pulley for winch with shackle and bolted lashing point

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles available for immediate or short-term delivery on our website. Partial equipment listing. Full equipment details available upon request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of outward folding lashing rings (LC 5,000 daN) * 3 pairs of outward folding lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, with checker plate covering over the axles Two-part steel ramps: * One pair of galvanized two-piece steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating surface C40/5 (point load approx. 2.8 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding ramp sections and hydraulic lifting mechanism * Maximum load per pair: 30,000 kg Landing legs: * JOST landing gears (manual) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, can be activated via reverse gear and manually * Air suspension with raise and lower valve Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer at our discretion Ppedsy Auhujpfx Aaper TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Brake system: * WABCO brake system compliant with EU regulations with EBS-E (2S2M) without connectors to the tractor unit Steel structure: * Steel construction made from high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection * Final coating with 2 layers of two-component topcoat, single colour in RAL 3002 carmine red, in accordance with RAL System 841GL * Rear section metalized and painted RAL 9010 (Pure White) * Wheels in silver Including accessories: * One bracket for warning signs on both sides at the gooseneck and at the rear, including socket * 1 spare wheel holder under the loading area on the right-hand side * 2" kingpin * Galvanized steel front wall * Yellow-red air couplings on the galvanized connector strip at the front * 4 wheel chocks with holders on the front wall * 3 height-adjustable wooden planks * Galvanized folding supports under the loading area bevel * Bracket for a rotating beacon at the rear of the trailer * Height-adjustable tarpaulin frame (approx. 3,960 mm) * Galvanized front wall with tensioning mechanism for sliding curtains, height-adjustable by approx. 400 mm * EDSCHA roof, forward-sliding, on aluminium roof beam profiles (bolted with front and rear wall) * 3 pairs of sliding stakes in the loading area * Superstructure can be hydraulically widened at the rear to left and right by approx. 750 mm * Sliding roof with liftable portal carrier * Sliding tarpaulin with approx. 700 mm slack in length, with tensioning straps spaced approx. 600 mm

Stanje: novo, največja dovoljena obremenitev: 37.980 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Gooseneck with approx. 45° beveled front corners and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Loading platform (extendable version): * Extendable loading platform with rear chamfer approx. 1,000 mm x 8° * 6 pairs of folding-out lashing rings (LC 5,000 daN) * 3 pairs of folding-out lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring, approx. 48 mm thick, with checker plate over the axles Landing legs: Pedjy Aufmopfx Aapopr * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t static load) Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer at our discretion TPMS: * TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the tractor unit is via the standardised EBS interface per ISO 11992. For correct display, the tractor unit must be able to transmit and display these data. Axles: * BPW axles and suspension, 2 rigid axles, 1 steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock activated by reverse gear and manually * Air suspension with lift/lower valve * Axle tools Brake system: * Brake system compliant with EU regulations with EBS-E (2S2M), no connecting lines to the tractor unit Steel construction: * Steel construction made from high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * Complete steel structure automatically shot-blasted after welding with blast wheel machine * Secondary blasting with corundum for optimal coating adhesion * Final painting with 2 layers of 2K topcoat, single colour RAL 3002 Carmine Red as per RAL System 841GL * Rims in silver-grey * Rear section metallized and painted in RAL 9010 (pure white) * Paint system tested in salt spray test per ISO 9227-NSS * Cavity sealing with special wax Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights synchronized with the indicator * ASPÖCK-UNIBOX at the front connector rail with sockets: 24N, 24S, & 15-pin according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Accessories included: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * One spare wheel carrier in front of the front wall * Yellow-red air couplings on the galvanized front connection rail * 4 chock blocks with holder at the front wall * Mount at the rear of the gooseneck for ALU approach ramps * Galvanized folding supports under the loading platform rear chamfer * At the gooseneck and on the rear panel, left and right, each with a bracket for warning signs including socket * Load gauge for determining axle loads with load diagram * On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in stanchions are removable. (Superstructure length approx. 2,560 mm) * One galvanized toolbox integrated in the beveled gooseneck * 3 pairs WADER C

Stanje: rabljeno, največja dovoljena obremenitev: 51.556 kg, skupna masa: 66.200 kg, konfiguracija osi: 3 osi, prva registracija: 06/2000, dolžina tovornega prostora: 14.670 mm, širina tovornega prostora: 2.980 mm, skupna širina: 3.000 mm, skupna višina: 3.200 mm, Nizkoposteljna prikolica 10.350 mm, višina nakladanja: cca 900 mm, labodji vrat: 3000 mm, sprednji naklon 440 mm, zadnji naklon: 880 mm, hidravlična nakladalna rampa (DxŠ) 4100x1220 mm, deljena, 7 priveznih ušes na vsaki strani, zaboj za orodje na labodjem vratu, podporni vitli, izvlečne opozorilne table, rotacijska luč, 3. in 4. os hidravlično prisilno vodeni, bobnaste zavore, zračno vzmetenje, vozilo je lahko polepljeno in/ali označeno z oglasom. SI85462 Naša ponudba je praviloma brez novega pregleda TÜV. Če želite nov TÜV pregled, vam lahko naši partnerski servisi pripravijo ponudbo! Vozilo je lahko polepljeno in/ali označeno z oglasom. Veljajo naši splošni pogoji dostave in plačila. Za ta predmet vam lahko pripravimo ponudbo za financiranje ali leasing. Ppedpexrxkiefx Aaper Kontaktirajte nas!

Stanje: rabljeno, največja dovoljena obremenitev: 62.950 kg, skupna masa: 91.400 kg, konfiguracija osi: 3 osi, prva registracija: 12/1994, dolžina tovornega prostora: 18.910 mm, širina tovornega prostora: 2.730 mm, skupna širina: 2.750 mm, skupna višina: 3.300 mm, Oprema: ABS, 5-osovinski poluprikolica sa niskom platformom, LANGENDORF DOLLY OSOVINA, odvojivi labudov vrat, tehnički dozvoljena ukupna masa oko 103.500 kg, korito za bager: (D x Š) 8150 x 2750 mm, visoko korito: (D x Š) 7360 x 2730 mm, labudov vrat: (D x Š x V) 3400 x 2460 x 410 mm, ABS, BPW osovina/e, sve osovine hidraulički prisilno upravljane, elektrohidraulično dodatno upravljanje, bubanj kočnice, vazdušno ogibljenje, vozilo može biti oblepljeno i/ili označeno reklamom. Podek Akcqepfx Aapepr

Stanje: rabljeno, največja dovoljena obremenitev: 69.800 kg, skupna masa: 97.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2014, dolžina tovornega prostora: 19.800 mm, skupna širina: 2.750 mm, skupna višina: 2.900 mm, Oprema: ABS, Special low-bed trailer for long and heavy-haul transport. The low-bed deck offers a load area of approx. 7,700 mm, plus an additional 5,300 mm extendable. The low-bed deck can be rotated and converted into a platform (length 15,305 mm—extendable up to 20,605 mm). Loading height as a low-bed is approx. 420 mm; as a platform, the loading height is approx. 800/900 mm. The low-bed deck can be widened up to 3,200 mm. Axles: DOLL panther technology, double wishbone suspension with hydraulic damping, 12,000 kg per axle, fifth-wheel load 25,000 kg. Payload capacity up to approx. 80,000 kg, applicable only at reduced speeds. Dimensions without front dolly axles: length approx. 17,350 mm + 5,300 mm extendable. Unladen weight approx. 21,600 kg. Payload capacity up to approx. 69,650 kg, applicable only at reduced speeds. Current new price approx. EUR 460,000 net. SI85047 Our offer is generally without a new roadworthiness inspection (TÜV). If a new TÜV inspection is required, we are happy to provide a quote in cooperation with our partner workshops! The vehicle may be fitted with advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. Ppedpfxoyad Rls Aaper We would be pleased to provide a finance or leasing offer for this unit. Please contact us!

Stanje: rabljeno, lastna masa: 9.140 kg, največja dovoljena obremenitev: 28.860 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, prva registracija: 01/2007, dolžina tovornega prostora: 11.600 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 890 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, barva: rdeča, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: v tranzitu / na poti, 2 osi, zračno vzmetenje, zadnja os vodilna, ABS (protiblokirni sistem), razširljiv do 3 m, pritrdilna ušesa, hidravlične rampe, zadnja podpora, stranska aluminijasta zaščita, podpore, dvojna montaža pnevmatik. Nadgradnja: 2-osna nizkopodna polprikolica s hidravličnimi rampami. Vse informacije brez garancije, ker je polprikolica v tranzitu! Podatki o dodatni opremi brez garancije, spremembe, vmesna prodaja in napake pridržane! Ppsdpfxeyzgndj Aapor

Stanje: potreben popravila (rabljeno), Funkcionalnost: nepreverjeno, barva: zelen, Leto izdelave: 2011, Naprodaj: SAHN nizkopodni priklopnik - 4-osni NOOTEBOOM OVB-90-05V Ppsdpfx Ajy Dgrueapor Na voljo v kratkem roku

Stanje: rabljeno, največja dovoljena obremenitev: 31.250 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2016, dolžina tovornega prostora: 19.480 mm, širina tovornega prostora: 3.000 mm, višina nakladalnega prostora: 780 mm, skupna širina: 2.550 mm, skupna višina: 2.300 mm, Leto izdelave: 2016, Oprema: ABS, Broshuis E-2190/24 Polnizki priklopnik Prva registracija Gigant osi 1 dvižna os Bobnaste zavore z ABS in EBS Pnevmatike: 205/65 R17,5 35/40% Zračno vzmetenje Skupna masa: 42.000 kg, Lastna masa: 10.750 kg, Nosilnost: 31.250 kg Dolžina labodjega vratu: 4,15 m, Dolžina tovornega prostora: 8,93 + 6,40 m, Širina: 2,55 m + 2x25 cm, Višina nakladalne površine: 78 cm Ppjdpfx Aasy A Apmopjr Skupna nakladalna dolžina: 19,48 m Zadnje podporne noge Žepi za stebričke 4x kontejnerske zapore (twistlocks) Prstani za privezovanje Pridržujemo si pravico do napak, tipkarskih napak in vmesne prodaje.

Stanje: novo, lastna masa: 8.785 kg, skupna masa: 33.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.311 mm, širina tovornega prostora: 2.500 mm, skupna dolžina: 2.600 mm, skupna širina: 4.000 mm, skupna višina: 14.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, Oprema: ABS, | Krone Cool Liner Multitemp globokozamrzovalna polprikolica - novo vozilo | Dvojna etaža brez nosilcev - nosilci na zahtevo na voljo | Širina za rože, dvižna os | Krone osi z disk zavorami | Orodjarna | Nosilec za rezervno kolo | Hlajeni agregat ThermoKing SLXi | Pnevmatike: 385/65 R22.5 | Diesel ure: 3h | Polprikolica iz aktualne proizvodnje!!! Več na voljo | Možne napake, tipkarske napake in predhodna prodaja. Podsyi S R Ejpfx Aapjpr