Red River Asphalt Semi-Trailer nakup rabljenega (32.436)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 4.816 kg, največja dovoljena obremenitev: 33.184 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 11.250 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", stanje pnevmatik: 100 odstotek, Tailored Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are individually customized to customer specifications. Chassis Semi-Trailer Container Fine-grain steel welded construction, fifth wheel plate with exchangeable kingpin and two kingpin positions Container mounts: included Rear extension retracted: 1 x 20 ft flush with the rear, note: low fifth wheel load Rear extension extended 1st stage: 1 x 30 ft, 2 x 20 ft, 1 x 40 ft with gooseneck tunnel Rear extension extended 2nd stage: 1 x 45 ft with gooseneck tunnel and rear overhang without height adjustment at the rear and without folding center supports, transportation of containers without a tunnel is not possible. Plug adapter for front locking, for locking containers without tunnel from underneath, with bracket for storage when not in use Rear extension mounted on rollers, with hand crank 24 t, two-speed landing gear, single-side operation 2 wheel chocks with holder Side underrun protection aluminum Rear underrun protection galvanized steel Extendable rear underrun protection for 45 ft containers Half-shell mudguards included with spray-suppression mud flaps according to EU standards Rear impact protection Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle and chassis laser-aligned to reduce tire wear and fuel consumption Axle spacing offset mm (intermodal transport) up to 44 t gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and traction assistance, operation by 3x braking (traction assist functional up to axle overload of 30% and max. speed of 25 km/h) Brake System Dcodpezlkiwofx Ammol Two-line pneumatic brake system Color-coded lines for easy servicing. Spring-actuated parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer vehicle may only be towed by tractor units that ensure the effectiveness of ABS! with lift & lower valve Vehicle stability system Axle load detection via EBS CAN bus signal, for display in the driver's cab (truck must be pre-configured, no truck installation, not a calibrated scale) Wheels and Tires 385/55 R22.5 brand according to manufacturer’s choice Steel rims, factory silver Electrics 24 volt, multi-chamber lights, tail and brake lights in LED, side yellow LED lighting (Note: Certain tractor units may incorrectly diagnose faults even if functions are operational) 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable sockets at front, without connecting cable Operating Instructions When transporting a 45 ft container with short tunnel, with or without front extension, the permissible system length from kingpin to rear of the vehicle and the total train length of 16,500 mm is exceeded! Rear underrun protection must be extended manually! An exemption according to § 70 StVZo is required! Registration/Country Plates Germany With Dekra inspection and certificate (according to §13 EC-FGV) 24/7 service hotline Prepared for one-line license plate holder 390 contour marking with reflective tape to ECE R 048, white on sides and red at rear Painting Frame hot-dip galvanized incl. passivation 15-year warranty against rust-through Support legs painted black

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 12.560 kg, največja dovoljena obremenitev: 45.940 kg, skupna masa: 58.500 kg, konfiguracija osi: 3 osi, barva: rdeča, Leto izdelave: 2024, Oprema: ABS, Nizkopodna polprikolica Langendorf / 2024 / 46 t nosilnosti / 2 enoti Leto 2024 Tehnični podatki Dovoljena skupna masa 58.500 kg Masa vozila 12.560 kg Nosilnost 45.940 kg Merilnik obremenitve Dcsdpfxozxfyds Ammol 4 SAF osi ABS AGS Zračno vzmetenje Tehnično in vizualno stanje je odlično. Na voljo sta 2 identični enoti.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, SEMI-TRAILER IN EXCELLENT CONDITION AVAILABLE FOR VIEWING IN RAVENNA Dcjdpfx Amevrxl Djmjl

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, Leto izdelave: 2015, obratovalna teža: 32.700 kg, Oprema: ABS, Polpriklopnik Menci SA850R ALU-kipar 36 m³ s pomično ponjavo, zračno vzmetenje, 3 osi, BPW osi, skupna dovoljena masa 39.000 kg - nosilnost 32.700 kg. Skupna dolžina polpriklopnika 10,7 m, širina 2,55 m. 1. os nastavljiva po višini, 3. os vodljiva. Pnevmatske gume 50% (385/65 R22.5), ABS. Neto izvozna cena 12.500,00 EUR. Vsi podatki brez garancije/pridržujemo si pravico do napak. Dedetzlmiepfx Ammecl

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, Leto izdelave: 2015, obratovalna teža: 32.700 kg, Oprema: ABS, Polpriklopnik Menci SA850R\nALU prekucnik 36 m³ z drsno pomično ponjavo\n3 osi\nzračno vzmetenje\nBPW osi\nSkupna dovoljena masa 39.000 kg - nosilnost 32.700 kg\nSkupna dolžina polpriklopnika 10,7 m\nŠirina 2,55 m\n1. os nastavljiva po višini\n3. os krmiljena\nPnevmatike 50% (385/65 R22.5)\nABS\nIzvozna neto cena 12.500,00 EUR\nVsi podatki brez garancije/pridržujemo si pravico do napak Dcedpotznalsfx Ammjl

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, največja dovoljena obremenitev: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2015, prostornina tovornega prostora: 36 m³, vzmetenje: zrak, Leto izdelave: 2015, obratovalna teža: 32.700 kg, Oprema: ABS, Polpriklopnik Menci SA850R ALU-kipar 36 m³ s pomično ponjavo 3 osi zračno vzmetenje skupna masa 39.000 kg – nosilnost 32.700 kg BPW osi Skupna dolžina tovornjaka 10,70 m Širina 2,55 m 1. os nastavljiva po višini 3. os vodilna Pnevmatske gume 50% (385/65 R22.5) ABS Neto izvozna cena 12.500,00 evrov Vse informacije brez garancije/možne napake. Djdpfxjtv Dn Te Ammecl

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 6.800 kg, največja dovoljena obremenitev: 28.200 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.000 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.200 mm, skupna širina: 2.550 mm, skupna višina: 2.645 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, Leto izdelave: 2026, Prilagojena transportna rešitev Konfigurirajte svoje vozilo Fliegl glede na vaše zahteve. Prikazano vozilo je zgolj primer. Proizvodnja in oprema se izvajata individualno, po želji stranke. #Podvozje, sedlo, prevoznik Finozrnat jeklen varjen okvir, sedelna plošča z zamenljivim 2" kraljevskim členkom, pritrdilni položaj za opozorilne table na zadnji strani, zunanji okvir z "profilom Load-Lock", za pritrditev veznih pasov, 24 ton. Dvojna podorna opora, upravljanje z ene strani, priključni točki za prikolico, rumeno označeno, od tega 2 na zadnji strani kot vlečna kljuka, zaklep za kontejner: 4 pari zaklepov za kontejnerje, vgrajeni v tla za 2 x 20-čevljske ali 1 x 40-čevljski kontejner, želeti za nosilce v zunanjem okvirju, 80 x 80 mm notranje mere, žleti za nosilce v sredini tla, 80 x 80 mm notranje mere, vstavni nosilci, Š=80/ G=80/ D=1200 mm, pocinkano, priključni točki za privez v zunanjem okvirju, 5 ton na točko, 2 skladiščna predala, Š=cca. 1230 / V=cca. 450 mm, zaprti, nameščeni po celotni širini pred osmi, namesto stranskega varovala, sprednji zaklep je vstavljiv, priključne/nosilne letve nameščene v tla po celotni širini do zunanjega okvirja, cca. 100 mm visoke, z 20 mm okroglimi jeklenimi letvami, zgoraj in spodaj, razdalja od zgoraj do spodaj cca. 60 mm (okrogle jeklene letve), spodaj z vogalno pločevino kot zaključek, delno odprt navzdol. Za privez in pritrditev nosilcev 80 x 80 mm, skladiščni prostor za opozorilne table, odprt, glede na tehnične možnosti. #Osi + vzmetenje SAF osi s kolutnimi zavorami, "osi/podvozje lasersko izmerjeno", zmanjšanje obrabe pnevmatik in porabe goriva, zračno vzmetenje, 1. os je samodejno dvižna os, vključno s prisilnim spuščanjem in pomočjo pri zagonu, upravljanje "3-krat pritisnite zavoro", 2 višini vožnje, preklop med njimi s pomočjo gumba. 1 x za višino sedla 1120 mm 1 x za višino sedla 1200 mm #Zavorni sistem Dvovodna zračna zavora, barvna razporeditev vodov za enostavno vzdrževanje, zavora s pomnilnikom v vzmeti, 2 med seboj neizmenljivi priključki spredaj, EBS, elektronski zavorni sistem z vtičnico EBS spredaj, z ventilom za dviganje in spuščanje, sistem stabilnosti vozila med vožnjo. Kolesa in pnevmatike Djdjzb Iu Depfx Ammecl 385/65 R 22,5", jeklena platišča, tovarniška srebrna barva #Elektrika 24 Volt, 4 x 3-komorne luči, bočna rumena LED osvetlitev 2 beli pozicijski svetili spredaj, LED 2 belo/rdeči stranski gabaritni luči zadaj, LED 2 x 7-polna in 1 x 15-polna neizmenljiva vtičnica spredaj, brez povezovalnega kabla Rotacijska luč z nosilcem, vklopljena prek pozicijske luči (luč je snemljiva) 2 para opozorilnih tabel, dvojno LED osvetljeni, izvlečni do 4500 mm in snemljivi s priključkom. Z dodatnim nosilcem na zadnji strani dodatna 7-polna vtičnica (po ISO 1724) v spodnjem varovalu zadaj #Tla Plošče z mrežnim tiskom, debeline cca. 30 mm, prečne letve z omega vložkom, na vzdolžnih nosilcih za visoko točkovno obremenitev, za obremenitev vilic do največ 7100 kg #Čelna stena / Sprednji nosilci 25 mm aluminijast profil, 1650 mm visok, stranski nosilci iz jekla v volumenski izvedbi Čelna stena je dodatno obložena s ploščo z mrežnim tiskom, 1250 mm visoko "Blokirna palica", spodaj na notranji strani na cca. 140 mm višine, z jekleno zaščito pred udarci Skladiščni prostor za vstavne nosilce 80 x 80, notranjost na čelni steni #Barvanje Okvir: pocinkano, vključno s pasiviranjem ali barvano po želji stranke Podporni noge: črno prevlečene Sprednji nosilci: pocinkani in barvani v barvi čelne stene Čelna stena: aluminij nar

Stanje: rabljeno, številka stroja/vozila: YX9SET3460801xxxx, Leto izdelave: 2010, Prosimo, navedite referenčno številko na zahtevo: 23157 Specifikacije: Model 2010 Ni odobreno za EU Zadnja odobritev za EU do: 28.04.2025 Predmet za popravilo Pnevmatike (glejte slike) Ročica na 1 osi Podporno vrtenje na 3 osi Zadnja luč Pripravljeno za dostavo Opis: Imamo na prodaj nadgradnjo za tovornjak Maur, model 2010, s 3-osnim kipnim priklopnikom, ki je predmet za popravilo. Prodaja se kot predmet za popravilo, ker ni odobreno za EU in ima napake in pomanjkljivosti. Za ponovno uporabo so potrebni dodatni stroški. Pripravljeno za dostavo. Prevoženi kilometri: 1 Djdpszqnc Ssfx Ammjcl Tehnični pregled: Ne Odobreno za EU do: 28.04.2025 Lastna teža: 11570 Skupna teža: 46000 Nosilnost: 34430 Širina: 255 Dolžina: 1120 Model: nadgradnja za tovornjak, 3-osni kipni priklopnik, predmet za popravilo = Dodatne informacije = Za dodatne informacije se obrnite na ATS Norway.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 4.700 kg, največja dovoljena obremenitev: 33.300 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 9.600 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", stanje pnevmatik: 100 odstotek, Tailor-made Transport Solution Configure your Fliegl vehicle according to your needs. The vehicle shown is an example. Production and equipment are customised to individual customer requirements. Chassis Semi-Trailer for Containers Fine-grained steel welded construction, fifth wheel plate with interchangeable kingpin and 2 kingpin positions Container Mounts: Rear extension retracted: 1 x 20 ft or 1 x 30 ft flush with rear Centre telescopic 1st stage, rear extension extended 1st stage: 2 x 20 ft or 1 x 40 ft with or without gooseneck tunnel Centre telescopic 2nd stage, rear extension extended 2nd stage: 1x45 ft with or without gooseneck tunnel, overhanging at the rear. Centre telescopic as interlocking central tube frame with pin locking with rear height adjustment and foldable centre supports for containers without tunnel Front container guides, plug-in and removable Plug adapter for front locking to secure containers without tunnel from below, with holder for stowing when not in use Rear extension mounted on rollers, with hand crank 24 t, 2-speed landing gear, single-side operation Extendable underrun protection for 45 ft containers Half-shell mudguards with anti-spray mud flaps according to EU standards Rear impact protection Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser alignment to reduce tyre wear and save fuel Offset axle spacing mm (for combined traffic), up to 44t gross train weight Air suspension Brake System 2-line compressed air brake system Coloured piping for easier servicing Spring-loaded parking brake Tele Control Axle lift for easy telescoping 2 foolproof coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without cable Dsdji Ri Exspfx Ammscl Note: The trailer may only be towed by tractor vehicles that ensure effective ABS operation! with lift & lower valve Vehicle stability system Axle load detection via EBS CAN bus signal, for display in the cab (truck must be pre-equipped, no truck installation, not a calibrated scale) Wheels and Tyres 385/55 R22.5, make according to manufacturer’s choice Steel rims, factory silver Electrics 24 volt, multi-chamber lights, LED tail and brake lights, yellow LED side markers (Note: with certain tractor units, faults may be diagnosed although operation is ensured) 2 white marker lights at the front 2 white/red lane marker lights at rear 2 x 7-pin foolproof sockets at the front, without cables Operating Notes Attention: Transport of filled tank containers is excluded! When transporting 45 ft containers with short tunnel, with or without front extension, the permissible system length from kingpin to the rear edge of the vehicle and the overall train length of 16,500 mm are exceeded! The underrun protection must be extended manually! An exemption according to § 70 StVZo is required! Country of Registration / Licence Plates Germany Type approval according to EC 2007/46 24/7 Service Hotline Prepared for single-line licence plate holder Warning sign according to ECE - 70 Outline marking with reflective tape according to ECE R 048, white on sides and red at rear Paintwork Frame front section + rear extension hot-dip galvanised Rear section DB 7350 Nova Grey – 10 years warranty against rust-through or hot-dip galvanised – 15 years warranty against rust-through

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 9.730 kg, največja dovoljena obremenitev: 28.270 kg, konfiguracija osi: 3 osi, skupna dolžina: 48.000 mm, vzmetenje: zrak, barva: bela, Leto izdelave: 2016, Oprema: dvižna zadnja plošča, hladilna enota, Hladilni polprikolici Lamberet / Carrier Vector 1950 MT (večtemperaturna različica) / Dhollandia 2500 kg / ATP veljaven do 10/2027 Djdpjzxfx Hjfx Ammjcl Letnik 2015 Tehnični podatki Bruto masa: 38.000 kg Masa praznega vozila: 9730 kg Nosilnost: 28.270 kg vzmetenje na zračnih blazinah 3 osi BPW zavorne kolutne zavore Diesel-električni generator Carrier Vector 1950 MT (večtemperaturna različica) 2 izparevalnika Tiskalnik temperature ATP/FRC veljaven do 10/2027 Aluminijasta dvižna platforma Dhollandia 2500 kg Odlično tehnično in vizualno stanje.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 12.560 kg, največja dovoljena obremenitev: 45.940 kg, skupna masa: 58.500 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, barva: rdeča, Leto izdelave: 2024, Oprema: ABS, Nizkopodna polprikolica Langendorf / 2024 / 46 t nosilnosti / 2 enoti Leto 2024 Tehnični podatki Dovoljena skupna masa 58.500 kg Masa vozila 12.560 kg Nosilnost 45.940 kg Merilnik obremenitve 4 SAF osi ABS Dcjdpfozxfykox Ammel AGS Zračno vzmetenje Tehnično in vizualno stanje je odlično. Na voljo sta 2 identični enoti.

Stanje: rabljeno, 0650 PONJAVNI POLPRIKLOP S COIL JAŠKOM, NASTAVLJIVA CERADA, 2014 Ponjavni polpriklopnik, intermodal Krone 2014 3 fiksne osi Pnevmatike 385/65-22.5 Jašek za coil Luknje za nosilce Nastavljiva višina cerade Drsna ponjava (odpri/zapri) Registrska: XA130MC Dedsy Sg E Dopfx Ammocl Lokacija: Verona € 8.400 + DDV

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 3.100 kg, največja dovoljena obremenitev: 34.900 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 7.690 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, Customised Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer specifications. Chassis Semi-Trailer for Containers Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Container mounts: 1 x 20-foot container central (or swap body container 7.15 / 7.45 m), fixed at the front, container lock twistlocks in extended version 24 t 2-speed landing gear, single-sided operation with anti-spray mudflaps according to EC standards Stainless steel drip tray with 1 1/4" drain pipe + 1 1/4" shut-off valve, incl. drip plate, perforated tread plates approx. 400 mm wide, left & right between drip tray and main longitudinal beam 4 hose racks approx. 4,500 mm long (hose box) for hose tubes: 2 x DN 200 outside + 2 x DN 160 centred, rear hose box (stainless steel) 300 mm deep, splash water protected, lid (stainless steel) all-round rubber seal, drainage hole at lowest point, then without lid on hose tubes 1 stainless steel grounding lug at the rear right side of the frame, with international grounding sticker on the frame Access steps right rear on underrun guard, rear right outside on main beam with tread plate approx. 260 mm long and 300 mm wide Dcedpfx Aei Rixkommel Axles & Suspension SAF disc brake axles Axle/chassis laser alignment: reduces tyre wear and fuel consumption Offset axle spacing (combined transport) up to 44 t gross train weight Air suspension 1st axle automatic lift axle, incl. forced lowering and start assist, operated by 3x brake activation Braking System 2-line air brake system Colour-coded pneumatic lines for easy maintenance Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: Trailer must only be towed by tractors that ensure ABS functionality! With lift & lower valve Vehicle stability control system Axle load recognition via EBS CAN-bus signal, for display in cab (truck must be pre-equipped), not calibrated as a weigh scale Wheels and Tyres 385/65 R22.5, manufacturer as per supplier’s choice Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at front 2 white/red marker lights at rear 1 x 15-pin socket at front, without connection cable Operating Instructions The specified gross weight is technically possible; depending on the load, the gross weight within the permissible axle/support/kingpin loads may not be achievable (poor driving and trailing performance may result from incorrect load distribution) This vehicle may only be loaded with 20’ tank containers complying with ISO 668 and especially ISO 1496-3! Tank containers must have 'end-load-transfer areas' (end transverse beam load transfer areas)! Country of Registration/Plates Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Warning plate to ECE 70 Inspection according to ADR sec. 9.1.1.2, EX/II, EX/III / Registration certificate for vehicles for the transport of certain dangerous goods (ex.B3), with warning panel at the rear; not valid for substances UN 0331 and 0332 (explosives B-E) Conspicuity marking with reflective tape

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, konfiguracija osi: 3 osi, prva registracija: 06/2009, dolžina tovornega prostora: 11.450 mm, širina tovornega prostora: 2.550 mm, prostornina tovornega prostora: 55 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22.5, barva: bela, Leto izdelave: 2009, Oprema: ABS, ACERBI KIPER POLPRIKOLICA LETO 2009 3 OSI PRVA DVIGLJIVA TRETJA KRMILJENA KOLUTNE ZAVORE Dedpfx Asw S Hdrommscl PNEVMATIKE 385/65 R22.5 PNEVMATIČNO VZMETENJE POKRIVANJE/ODKRIVANJE Z DALJINSKIM UPRAVLJANJEM TESNILNA STRANSKA STENA TOVORNI PROSTOR 55 m³ DOLŽINA 11.450 MM ŠIRINA 2.550 MM CENA: 23.500,00 € + DDV

Stanje: rabljeno, številka stroja/vozila: W09STLB3NCEN1xxxx, Leto izdelave: 2012, Prosimo navedite referenčno številko pri povpraševanju: 22956 Tehnični podatki: Letnik: 2012 Zasukljiva 3. os Dvižna 1. os Dobre pnevmatike (glejte slike) Dolžina spodnje ravni: 9,50 m Dolžina zgornje ravni: 4 m Zavore v dobrem stanju Na novo prebarvan Lastna teža: 8910 kg Dovoljena skupna masa: 50.000 kg Djdpfx Ajzqqrpemmscl Takoj na voljo Opis: HRD Jumbo polpriklopnik, 3 osi, letnik 2012. Po podatkih lastnika so zavore v dobrem stanju. Takoj dobavljivo. TÜV: Da EU-homologacija do: 06.05.2027 Lastna teža: 8910 kg Skupna masa: 50.000 kg Model: Jumbosemitrailer 3-osni = Dodatne informacije = Za več informacij se obrnite na ATS Norway.

Stanje: rabljeno, številka stroja/vozila: WSM0000000526xxxx, Leto izdelave: 2021, Prosimo, navedite referenčno številko na zahtevo: 24172 Splošno: Letnik: 2021 Znamka/model: Schmitz Cargobull SKO 24/L-13.4FP Cool V7 Število osi: 3 Prva registracija: 24.08.2021 Informacije: Dvignjena os na 1. osi Hladilna/zamrzovalna enota Thermo King Kapaciteta: 33 palet Zračna vzmetenje Pnevmatike: Glejte slike Mere in teža: Dolžina: 1404 cm Medosna razdalja: 131 cm Lastna teža: 8954 kg Največja dovoljena masa: 33046 kg Opis: Schmitz hladilni polprikolnik, letnik 2021, z hladilno/zamrzovalno enoto Thermo King. Na voljo več enot. Takoj na voljo. TÜV: Da EU odobreno do: 29.04.2027 Lastna teža: 8954 Skupna teža: 42000 Dcedezyrmgjpfx Ammjl Nosilnost: 33046 Širina: 260 Dolžina: 1404 Model: Cargobull polprikolnik z hladilno/zamrzovalno enoto – Na voljo več! = Dodatne informacije = Za dodatne informacije se obrnite na ATS Norway.

Stanje: rabljeno, največja dovoljena obremenitev: 37.885 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2024, naslednji pregled (TÜV): 08/2026, Oprema: ABS, Izvleček – oprema Nosilna površina * v izvlečni izvedbi z zadnjo nagibno površino, približno 1.000 mm x 8° Obloga iz trdega lesa * približno 48 mm debeline, nad osmi rebrasta pločevina JOST opore za sedelno prikolico * (mehanske) z 2-stopenjskim menjalnikom za približno 24 t dvižne obremenitve (približno 50 t testne obremenitve) BPW osi in vzmetenje * 2 trdni osi * 1 os s krmiljenim zglobom * Tehnična osna obremenitev: 12.000 kg na os Zračno vzmetenje * z ventilom za dvig in spuščanje Zavorna naprava * v skladu z direktivami EU, z EBS-E (2S2M) Dodatna oprema * 2-palčni kraljevi zatič * Ena pocinkana jeklena čelna stena, približno 400 mm visoka * Merilnik obremenitve za ugotavljanje osne obremenitve, vključno z diagramom obremenitve * Na podaljšku (gooseneck) aluminijaste stranske stene in zadnja stena, ki se lahko pritrdijo, približno 2.440 x 400 mm (D x V) * Ena orodjarna omara, pocinkana, integrirana v nagibni podaljšek (± 47 kg) * 3 pari WADER žepov za kontejnerje na nosilni površini za 20' (30') ali 40' kontejner. (± 30 kg) Djdszv A Aqepfx Ammscl * 6 parov žepov za podpore za vstavljive podpore, približno 100 x 50 mm, na zunanjem okvirju nosilne površine. (± 18 kg) * Podaljški, pocinkani, izvlečni za približno 230 mm na stran (± 230 kg) * Dvignjena os na sprednji osi * Premikalne vstavne letve za aluminijaste priklopne rampe na zadnji strani vozila * 2 LED luči za vzvratno vožnjo, nameščeni na zadnji plošči * 2 para Ferry obročev pod podaljškom in 2 para zadaj (± 16 kg) * Štiri opozorilne table, ki se lahko izvlečejo za približno 400 mm, približno 423 x 423 mm, z LED pozicijsko lučjo. (± 25 kg) * Na opozorilnih tablah nosilec za rotacijsko luč * Rotacijska luč, priložena ločeno * HRM-metalizacija (metalizacija z visoko odpornostjo) Lakiranje * Končni sloj lakiranja, enobarvna barva RAL 3002, karminsko rdeča.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 3.480 kg, največja dovoljena obremenitev: 34.520 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 7.450 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", Transportna rešitev po meri Konfigurirajte svoje Fliegl vozilo glede na vaše zahteve. Prikazano vozilo je primer. Proizvodnja in oprema sta izvedeni individualno glede na želje stranke. Podvozje polpriklopnika za kontejnerje Varjena konstrukcija iz finezrnatega jekla, sedelna plošča z zamenljivim 2'' kraljevskim zatičem in dvema pozicijama kraljevskega zatiča Sprednja zapora na nosilcu za dvigalko s klinastimi vodili na obeh straneh, zadnja zapora z neprekinjeno vrtljivo gredjo in povratno vzmetjo Brez pomožnega okvirja za samoznosne kontejnerje Prijemi za kontejnerje: Prečni zatezni nosilec, 2-kratna možnost zapore za 1 x 20 ft kontejner (Opomba! pri 20 ft nizka obremenitev sedla) 24 t, dvostopenjska podporna noga, enostransko upravljanje, z ravnim spodnjim delom, brez kompenzacije pomika Prosto merilo podpornega kota oz. prosto zanašalno območje nazaj pribl. 1850 mm 2 zagozdi z držalom Polovični blatniki z antisprašnim ščitnikom v skladu z EU Hidravlika Nizkotlačni cilinder do max. 170 bar, najmanjša stopnja trdo kromirana, s HDK Navojna spojka, fiksni del, NW 48 mm (brez cevi) Upravljanje hidravlike preko pomožnega pogona tovornjaka Hidravlični priključek s cevjo in HDK navojnim priključkom NW = 48 mm z navojno matico Osovine in vzmetenje 3 SAF diskaste zavorne osi s premerom diska 430 mm Lasermeritev osi/podvozja zmanjša obrabo pnevmatik in porabo goriva Razmak osi zamaknjen mm (kombinirani promet) do 44 t skupne vlečne mase Zračno vzmetenje. Zavorni sistem 2-žilni zračni zavorni sistem Barvno označene cevi za lažji servis Vzmetno parkirno zavoro 2 zaščiteni sklopni glavi spredaj, brez povezovalne cevi EBS, elektronski zavorni sistem s prednjo vtičnico EBS, brez povezovalnega kabla Pozor: Priklopno vozilo sme vleči le vlečno vozilo, ki zagotavlja delovanje ABS! s sistemom za dvigovanje in spuščanje Sistem za stabilizacijo vožnje Prepoznavanje obremenitve osi prek signala EBS-Canbus za prikaz v kabini voznika, tovornjak mora biti temu primerno pripravljen, ni vključenih tehtnic (ni overjene tehtnice) Kolesa in pnevmatike 6 x 385/65 R22.5, izdelovalec po izbiri proizvajalca 6 jeklenih platišč, tovarniško srebrnih Elektrika Dcjdpfxoi Ri Eue Ammel 24 voltov, večkomorni žarometi, stranske rumene LED luči 2 sprednji pozicijski beli luči 2 zadnji beli/rdeči sledilni luči 2 x 7-polni zaščiteni vtičnici spredaj, brez povezovalnega kabla Država homologacije/tablice Nemčija z Dekra overitvijo in certifikatom (po §13 EG - FGV) 24/7 servisna telefonska številka pripravljeno za enovrstni nosilec registrske tablice Obrisne oznake z odsevnim trakom v skladu z ECE R 048, ob strani bele, zadaj rdeče Lakiranje Okvir lakiran v barvi po želji 10 let garancije proti prerjavenju Podporne noge črno prevlečene Transportna rešitev po meri Konfigurirajte svoje Fliegl vozilo glede na vaše zahteve. Prikazano vozilo je primer. Proizvodnja in oprema sta izvedeni individualno glede na želje stranke.

Stanje: pripravljen za uporabo (rabljen), lastna masa: 7.200 kg, največja dovoljena obremenitev: 29.600 kg, skupna masa: 36.800 kg, konfiguracija osi: 3 osi, prva registracija: 07/2025, naslednji pregled (TÜV): 08/2026, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 89 m³, vzmetenje: zrak, medosna razdalja: 1.310 mm, barva: bela, Leto izdelave: 2000, Oprema: ABS, TRETJA OSP TRIOSNA PRIKOLICA Z ZAVORAMI NA DISKAH OSI KNORR, MERCEDES TAKOJ V UPORABI ZADNJI VRATA VELJAVNOST TEHNIČNEGA PREGLEDA POTEKLA Dcsdpfx Aew Hm Nremmel

Stanje: rabljeno, lastna masa: 5.933 kg, največja dovoljena obremenitev: 29.067 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, Condition – Very well-maintained vehicle from first ownership Category – Semi-Trailer Model – FLIEGL DHKA 350 – 35,000 kg Registration Month – 02 Registration Year – 2013 Gross Weight in kg – 35,000 Unladen Weight in kg – 5,933 Payload in kg – 29,067 Colour – Silver Number of Axles – 3 Maintenance – Inspection log Commercial/Export – Net price in € – 19,990 Subject to change, prior sale, and errors Phone: +49 551 50 84 912 According to Manufacturer Djdpfewk Ux Nex Ammecl Axles and Suspension SAF disc brake axles with 370 mm disc diameter; air suspension with raise and lower function; 1st axle is a self-lifting axle, including forced lowering and traction assist, operation via "3x braking" (traction assist operational up to 30% axle load excess and up to a maximum speed of 25 km/h) Chassis Special steel welded lightweight construction; fifth wheel plate with replaceable 2" kingpin Support gear/landing legs Not included Tyres/Rims 385/65 R 22.5” as selected by the manufacturer; polished aluminium rims as selected by the manufacturer Brake System Two-line brake system according to EC regulations; EBS; 2 mistake-proof coupling heads; spring-loaded parking brake; without connection cables Electrics 24 Volt, multi-chamber lights; 2 x 7-pin mistake-proof sockets; lighting according to EC regulations; without connection cables Hydraulics Low-pressure cylinder max. 170 bar with HDK screw coupling; fixed part, NW 48 mm (no hose connection) Body/Tub Aluminium floor made from high-quality abrasion-resistant material, 5 mm thick, Brinell 110, reinforced with U-cross beams; side walls made with neatly welded hollow chamber profiles, with bulk material deflecting top rail; inclined front wall, rear wall as pendulum tailgate with "double hinge", mounted externally with dual hook locking. Note! Only suitable for transporting sand, gravel, and round pebbles up to a max. grain size of 20 mm! Warranty is excluded for all other transported goods! Paintwork Frame blasted, primed, and finished in single-colour 2K/HS acrylic paint in DB Novagrau; body in RAL 9010 pure white with Revolution letterings Other Folding underride guard; wheel chocks with holder; ½ shell plastic mudguards; with Dekra inspection and certificate (according to §13 EC - FGV); contour marking with reflective strips per ECE R 048, white on the sides and red at the rear; shovel and broom holders on the outside of the front wall

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 9.000 kg, največja dovoljena obremenitev: 29.000 kg, skupna masa: 38.000 kg, prva registracija: 08/2020, barva: rdeča, Leto izdelave: 2020, ES-GE 2-Axle Lowbed Trailer, non-telescopic, Tridec Steering Gross Vehicle Weight: 38,000 kg Axle Load (2 x 10,000 kg): 20,000 kg Fifth Wheel Load: 18,000 kg Unladen Weight +/- Manufacturer Tolerance: approx. 9,000 kg Payload: approx. 29,000 kg Total Length: approx. 13,650 mm Total Width: approx. 2,540 mm Loading Platform Length: approx. 13,200 mm Loading Platform Width: approx. 2,540 mm Front Overhang: approx. 1,200 mm Front Radius: approx. 1,750 mm Kingpin Swing Clearance: approx. 2,100 mm Fifth Wheel Height: approx. 1,150 mm B-Dimension: approx. 12,000 mm Raised Platform Length: approx. 3,700 mm Deck Height, Raised Platform: approx. 1,480 mm Lowbed Length: approx. 6,500 mm Deck Height, Lowbed: approx. 250 mm Ground Clearance, Lowbed: approx. 100 mm Deck Height over Axle Assembly: approx. 3,000 mm Tractor Unit Specification A-Dimension: approx. 4,500 mm Fifth Wheel Height: approx. 1,150 mm Kingpin Swing Clearance: approx. 2,100 mm Chassis: - Frame made from high-grade fine-grain steel - Lowbed in rigid design - Axle assembly not detachable - Without excavator boom recess King Pin - 2-inch kingpin Landing Gear - Without front landing legs Dsdpfju U Np Tsx Ammocl Axles - 2 x 10,000 kg axles (17.5"), technically rated at 12,000 kg each - Manufacturer: Gigant - Enclosed drum brakes, asbestos-free brake linings - Automatic slack adjusters, central alignment - Axle spacing approx. 1,360 mm Suspension - Air suspension with raise and lower function - 2nd ride height for air suspension (+ approx. 30 mm) Steering - Hydraulic axle kingpin steering - All axles steered, brand "Tridec" Tyres - 9 x 245/70 R 17.5 tyres, load index 146/146 F - Manufacturer: Continental - Steel rims Brakes - Dual-circuit air brake system in accordance with EU directives, Manufacturer: "Knorr" - Automatic load-dependent braking force regulator - Standard air couplings red/yellow, per ISO 1726 - Electronic brake system, "EBS", 7-pin socket per ISO 7638, mounted on front in line with EU requirements. With ABS 4S/2M - With RSS (Roll Stability Support) - Parking brake via spring actuators - 4 wheel chocks with holders - Without flexible connection hoses (Wendeflex) to tractor unit - Air tanks made of aluminium - TIMG2 (Trailer Information Module) mounted for reading current axle loads Underrun Protection - Integrated into rear closure panel Side Frame - Side frame made from UNP steel approx. 200 mm Load Securing - 13 lashing points per side with 13,400 kg lashing capacity, foldable outward, mounted on outer frame - 1 pair of lashing rings with approx. 13,400 kg lashing force at the rear of the gooseneck, approx. 400 mm above ground - 1 pair of lashing rings with approx. 13,400 kg lashing force at the rear vertical end of the lowbed - 7 stake pockets per side on inner side of the outer frame for stakes approximately 80x50x4 mm, evenly distributed along the full length of the load platform - 6 stake pockets per side, welded on the exterior of the longitudinal beams Flooring - Approx. 28 mm hardwood floor with Omega profiles, fitted between the longitudinal beams - Checker plate (approx. 8/10 mm) over axle assembly Front Wall - Designed as a storage box with lid, approx. D 400 x H 450 mm, over the entire width of the loading platform, with chamfered corners Side Walls - 3 removable anodised side walls on the gooseneck, approx. 2,440 x 400 mm - Removable galvanised stanchions at the rear Galvanizing - All steel parts shot-blasted - Chassis spray-galvanized Paintwork - Primer and sin

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, SCHMITZ SEMI-TRAILER THERMOKING SLXi300 REFRIGERATION UNIT BRAND NEW, READY FOR REGISTRATION Dcsdpfxsxpi Exs Ammol • 1st axle liftable • 3rd axle steered • Alloy wheels • Aluminum floor PERSONALISED FINANCING OR LEASING OPTIONS AVAILABLE ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. CONTACTS: 0823 1686306 335 6713062 OPENING HOURS: MONDAY-FRIDAY 8:30 AM–7:00 PM – SATURDAY 8:30 AM–2:00 PM WE OFFER A LARGE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500 - V8 - 650 - 580 - 730 - S500 - S 500 - S500 – Stralis – Man - Nissan V8 - Intarder - 770s - Limited Edition - 660 S - Semi-trailer - Refrigerated Semi-trailer - Tipper Body – Lamberet – Schmitz – Isuzu – Fixed body – Crane – Tipper – 4 axles – 4 Rear Axles – Tway – T-Way - 540 – 460 HP – Xway – X-Way – Trilateral – V8 – Scania – Frost Edition Curtain Sider – Box – Tail-lift – Refrigerated Body – Insulated with Fridge – Van Domenico Truck srl declines all responsibility for any discrepancies in technical specifications, options, and features, which may in some cases differ from those described. We invite you to verify the characteristics of the specific vehicle.

Stanje: novo, lastna masa: 12.000 kg, največja dovoljena obremenitev: 54.000 kg, skupna masa: 66.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Extendable load area: - Extendable loading platform with rear bevel approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the platform (LC 10,000 daN) - Cut-outs in the outer frame for tensioning straps (LC 2,000 daN) - Hardwood floor approx. 48 mm thick, checker plate over the axles Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Brake system: - WABCO brake system according to EU regulations with EBS-E (4S3M) Steel construction: - High-strength fine-grained steel chassis Axles and tires: - BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with lifting and lowering valve - Axle tool kit Dcjdpfx Amoykpbkomol - TPMS tire pressure monitoring system to ECE R 141 - Tires: 245/70 R 17.5 3PMSF Accessories included: - 2" kingpin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection bar - 4 wheel chocks with holders on the front wall - One spare wheel with holder in front of the front wall - Electro-hydraulic power unit - Forced steering, operated from front and rear using a cable remote control with push buttons, with single-track monitoring of axles - European reflective panels (red-yellow) on trailer rear - White reflective tape in accordance with EU regulations on sides and on extension, rear red - Mountings on gooseneck and rear left/right for warning signs, incl. socket - Galvanized extensions, pull-out approx. 230 mm per side - Mount for rotating beacon at rear of trailer - Galvanized folding supports under the rear slope of the loading area - Mudflap at the rear of the trailer - Manual and documentation on USB stick - BEKAMAX (Pico) centralized lubrication system with standard grease NLGI-2 and removable pump guard - Removable ALU side boards and rear board on gooseneck, approx. 2,440 x 400 mm - Rear removable, galvanized stanchions (superstructure length approx. 2,560 mm) - INOX toolbox 1,350x400x400 mm on gooseneck - Note: toolbox covers oil filler cap - 4 pairs of WADER container pockets in the loading area for 1x 20ft, 2x 20ft, 1x 40ft or 1x 45ft container - 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame - Sliding mounting bar for ALU loading ramps at the rear of the vehicle - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the sloping rear section - Lift axle on front axle with control via TEBS-E depending on current axle load and load condition - Four extendable warning boards, approx. 400 mm, size approx. 423 x 423 mm, each with position light - Mounting for rotating beacon on the warning boards - Radio remote control for forced steering, additionally to cable remote, with indicator lights on receiver for single-track monitoring - Checker plate surfaces on gooseneck and loading area with painted-on sand coating for slip resistance - 80 km/h speed stickers on rear and both sides - Load gauge for axle load measurement, incl. load diagram

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33802032235, lastna masa: 4.983 kg, največja dovoljena obremenitev: 33.017 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2022, dolžina tovornega prostora: 13.990 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.120 mm, skupna dolžina: 13.990 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22.5", stanje pnevmatik: 100 odstotek, barva: svetlo zelena, Attention: The images shown are archive photos! The vehicle may still be in use! Chassis for Container Semi-Trailer Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin and two kingpin positions Container mounts: Rear extension retracted: 1 x 20-foot or 1 x 30-foot container flush with rear New locking positions for improved fifth wheel load for flush 20-foot containers Dedpfx Aeww Iczommecl Rear lighting system protected and integrated into the rear Middle telescope, 1st stage, rear extension extended, 1st stage: 2 x 20-foot or 1 x 40-foot (without gooseneck tunnel) Middle telescope, 1st stage, rear extension extended, 1 x 40-foot with gooseneck tunnel Middle telescope, 2nd stage, rear extension extended, 2nd stage: 1 x 45-foot with gooseneck tunnel and rear overhang Middle telescope, 2nd stage, front extension extended, 1st stage; rear extension extended, 2nd stage: 1 x 45-foot container with long gooseneck tunnel and chamfered corners; middle telescope as telescoping central tube frame with bolt locking The transport of filled tank containers is excluded. With rear height adjustment in galvanized version and folding central supports for containers without tunnel Container guides at the front, plug-in Front crossmember with latest Vario V3+ New Generation locking system Front extension with roller bearing, manually extendable (for 45" containers with long tunnel) Rear extension with roller bearing, manually extendable by hand crank 24-ton two-speed landing gear, single-side operation, with straight lower part, without compensating arm 2 wheel chocks with holder Side underrun protection, aluminum Rear underrun protection, galvanized steel Extendable rear underrun protection for 45-foot containers Full-width rear mudflaps (not applicable if forklift holder is fitted) Half-shell mudguards With anti-spray mudflaps according to EU standards Rear impact protection Spare wheel carrier for 1 electric wheel, with mounting kit 1 storage box for fire extinguisher up to 6 kg 1 fire extinguisher (ABC powder, 6 kg)

Stanje: novo, lastna masa: 9.300 kg, največja dovoljena obremenitev: 30.100 kg, skupna masa: 39.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Extendable loading platform: - Loading platform, extendable execution with rear bevel approx. 1,000 mm x 8° - 5 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - Cutouts in the outer frame of the platform for attaching tie-down straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tyres: - BPW axles, hydro-mechanically forced steering - Technical axle load: 12,000 kg - Air suspension with raise/lower valve - Axle tool kit - TPMS tyre pressure monitoring system according to ECE R 141 - Tyres: 235/75 R17.5 3PMSF Accessories included: - 2" kingpin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection strip - 2 wheel chocks with holder on the front wall - One spare wheel with holder in front of the front wall - Electro-hydraulic unit Dsdpfx Aoyxc Eyemmecl - Rear axle steering, operable from front and rear via cable remote control with push buttons, with axle single-track monitoring - European reflective warning plates (red-yellow) at the rear of the trailer - White reflective tape according to EU regulations on the sides and on the extension, red at the rear - Gooseneck and rear left and right brackets for warning signs, including socket - Sliding hook-in bar for ALU loading ramps at the rear of the vehicle - One bracket for a rotating beacon at the rear of the trailer - Galvanized folding supports under the rear bevel of the loading platform - One mudguard at the rear of the trailer - Operating manual and documentation on USB stick - Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump protection cover - Removable ALU side boards and tailgate on the gooseneck approx. 2,440 x 400 mm - The rear galvanized stanchions are removable (body length approx. 2,560 mm) - 3 pairs of WADER container pockets in the loading platform for 1x 20ft, 1x 30ft or 1x 40ft container - 6 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform - One INOX toolbox 1,500 x 390 x 810 mm under the loading platform, right side in direction of travel - Four warning signs, extendable by approx. 400 mm, approx. 423 x 423 mm with a position light - On the warning signs a bracket for a rotating beacon - Radio remote control for rear axle steering, in addition to cable remote control, with indicator lights on receiver for single-track monitoring - On the checker plate surfaces on the gooseneck and loading platform, a painted sand layer as anti-slip protection - Speed sticker 80 km/h at the rear and on both sides - Axle load gauge for determining axle loads, including load diagram