Müller-Mitteltal 14,4 To Kipper/ Rampen, 1 Mtr Gitteraufsätze nakup rabljenega (55.347)

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assemblies ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: Fpedpfsl Thy Rex Al Hog * Height-adjustable drawbar, approx. 300 mm * 40 mm flange drawbar eye ----General Attachments: * Jost mechanical landing gear, front * External, hot-dip galvanized folding supports, rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted on front wall outside ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 15-pin power connector * LED tail lights ----Loading Platform: * 50 mm softwood floor * 20'' container locks mounted at front and rear * Bolted smooth steel front wall * Drop sides, steel, trapezoidal profile, drop-down with drop-side lifting springs * Hot-dip galvanized, bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing brackets every 600 mm (5 lashing rings fitted each side) * 1 x 6.3 t lashing ring fitted in each corner front and rear * Various holes in front and rear transverse beams for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear storage compartment integrated in the chassis below the loading area ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Drop side color in RAL 9010 pure white * Side panels can be painted in a RAL color at extra cost ----Info: * New vehicle without registration * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle units ----Suspension: * Parabolic springs with balancing unit ----Drawbar / Flange Eye: * Drawbar height adjustable by approx. 300 mm * 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at front * Bolt-on, hot-dip galvanized folding supports at rear (external) * Side underrun protection * Plastic quarter mudguards * Plastic toolbox on front right, externally mounted on front wall ----Electrics / Lighting: * Tyre pressure monitoring system (TPMS) * 15-pin power connector Fpodpfxsl Tilxo Al Heg * LED tail lights ----Load Area: * 50 mm softwood floor * 20" container locks mounted at front and rear * Bolted bulkhead made of smooth steel sheet * Drop sides made of trapezoidal-profile steel sheet, foldable with sideboard spring lifter * Hot-dip galvanized bolted rear stanchions ----Load Securing: * Perforated outer rail, edged at approx. 45°, with lashing capacity of 2 t every 480 mm * Optional 3 t folding lashing brackets every 600 mm (five lashing rings mounted per side) * One 6.3 t lashing ring in each corner, front and rear * Various bores in front and rear crossmembers for 1.2 t lashing points ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear storage compartment recessed into the chassis frame under the loading area ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Sideboard colour in RAL 9010 pure white * Painting of side walls in a RAL colour of choice available at extra charge ----Information: * New vehicle, not registered * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 Masterline: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles Fedpfepk D D Ujx Al Hjpg ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange eye ----General Attachments: * Jost mechanical landing gear (front) * Two rear mechanical hot-dip galvanized fold-down supports * Tool box made of galvanized steel sheet, mounted right side * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * Bolted underride guard with LED tail lights ----Tipping Platform: * Net hooks on the sides and rear in the central locking mounts as well as 3 external on the front wall * Hot-dip galvanized chassis * Steel pallet 3-way tipper body, fully galvanized * Continuous, drop-side walls with spring-assisted board wall lifters, can be folded down—no center stanchions * Tailgate foldable and pendulum-mounted via manual central locking * Hot-dip galvanized bolted rear stanchion ----Load Securing: * 1 recessed and foldable 5 t lashing ring in each corner, as well as 4 recessed and foldable 3 t lashing rings on each side in the outer frame * 4 mm steel sheet floor, rear mount rail for ramps ----Ramps: * 1 pair aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear, integrated into the chassis ----Tires: * 235/75 R 17.5 tires ----Paint Finish: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle is hot-dip galvanized ----Notes: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 Masterline: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange eye ----General Attachments: * Jost mechanical landing gear (front) * Two rear mechanical hot-dip galvanized fold-down supports * Tool box made of galvanized steel sheet, mounted right side * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * Bolted underride guard with LED tail lights ----Tipping Platform: * Net hooks on the sides and rear in the central locking mounts as well as 3 external on the front wall * Hot-dip galvanized chassis * Steel pallet 3-way tipper body, fully galvanized * Continuous, drop-side walls with spring-assisted board wall lifters, can be folded down—no center stanchions * Tailgate foldable and pendulum-mounted via manual central locking * Hot-dip galvanized bolted rear stanchion ----Load Securing: * 1 recessed and foldable 5 t lashing ring in each corner, as well as 4 recessed and foldable 3 t lashing rings on each side in the outer frame * 4 mm steel sheet floor, rear mount rail for ramps ----Ramps: * 1 pair aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear, integrated into the chassis ----Tires: * 235/75 R 17.5 tires ----Paint Finish: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle is hot-dip galvanized ----Notes: Fpjdepk D Dmjpfx Al Hsg * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 8.670 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2025, * KA-TA-R 11.9 Masterline: ----Braking system: * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem compensation unit ----Drawbar / Flange Towing Eye: * 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * LED lighting * 15-pin power connector Fpsdpeq Hg Dxjfx Al Hjg ----General attachments: * Tool box made of galvanized sheet steel, mounted on the right side * Bolted underrun guard * Plastic quarter mudguards * Jost mechanical landing gear at the front * Two rear mechanical hot-dip galvanized folding supports ----Tipper body: * Net hooks on the sides and rear integrated into the central locking brackets as well as 3 pieces mounted externally on the front wall * Hot-dip galvanized chassis * Steel 3-way tipping body * Full-length drop sides without center post, folding down with drop side spring assist * Rear flap drop-down and swinging, lockable via manual central locking * Hot-dip galvanized bolted rear stanchion * 4 mm steel floor plate * Rear mounting rail for loading ramps ----Load securing: * 1 x 5 t recessed and foldable lashing ring in each corner * Additionally, 4 x 3 t recessed and foldable lashing rings in each side frame ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment integrated under the loading area at the rear of the chassis ----Tyres: * Tyres 235/75 R 17.5 ----Painting: * Axles, springs, air tanks, drawbar, and landing gear painted in a shade of black * Sideboard painted RAL 9010 pure white * Painting of side walls in any RAL color available at extra cost * Floor and front wall hot-dip galvanized ----Information: * Reinforced body with EN 12642 XL load securing certificate * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery time: * Available immediately ex works Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.600 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2025, * KA-TA-R 11.9 Masterline: ----Braking system: Fodpfx Alsv Dz N Aj Hjpg * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange towing eye ----Electrical / Lighting: * RDÜ tire pressure monitoring system * LED lighting * 15-pin power connector ----General Attachments: * Toolbox made of galvanized sheet steel on the right side * Bolted underrun protection * Plastic quarter mudguards * Jost mechanical landing gear at the front * Two mechanical hot-dip galvanized folding supports at the rear ----Tipper body: * Mesh hooks on the sides and rear in the central locking mounts plus 3 pieces on the outside of the front panel * Hot-dip galvanized chassis * Steel pallet 3-way tipper body * Continuous, drop-down side walls without center stanchion, with drop-side spring lift assist * Rear drop gate can be swung down or used as a pendulum via manual central locking * Hot-dip galvanized, bolted rear stanchion * 4 mm steel floor plate * Rear mounting rail for loading ramps ----Load securing: * One flush-mounted, foldable 5 t lashing ring in each corner * Four flush-mounted, foldable 3 t lashing rings in the outer frame on each side ----Ramps: * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment underneath the loading area, integrated into the chassis ----Tires: * Tires 235/75 R 17.5 ----Paintwork: * Axles, springs, air tanks, drawbar, and landing gear painted black * Drop side painted RAL 9010 pure white * Painting of the side walls in any RAL color possible for an extra charge * Floor and front wall hot-dip galvanized ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with equalizer unit ----Drawbar / Drawbar Eye: * Drawbar height-adjustable by 300 mm * 40 mm flanged drawbar eye ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic quarter mudguards * Plastic toolbox mounted on the front right side of the bulkhead ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: * Loading platform length: 6.27 m * Suitable for container transport * 50 mm softwood floor * Provision in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Trapezoidal-profiled steel drop sides with spring-assisted opening * Steel rear wall can be inserted between the ramp holders in front of the bulkhead when not in use * Bolted rear stakes ----Load Securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * 1 x 6.3 t lashing point in each of the front and rear corners * Various holes in the front and rear cross members for 1.2 t lashing options Fpsdpfx Aeq Ra D Eol Hsg ----Ramps: * Single-piece mechanical loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (retractable to 20 mm) * Rear approach angle approx. 860 mm ----Tyres: * Tyre size: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, rear wall, rear stakes and loading ramps * Sideboards painted RAL 9010 pure white * Painting of side walls in other RAL colours available at surcharge ----Notes: * Errors and prior sale reserved * New vehicle with manufacturer's warranty ----Delivery Time: ? Available from CW

Stanje: novo, največja dovoljena obremenitev: 14.550 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2024, * ETÜ-TA-R 19.0: * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension, drawbar with 50 mm flange eye and height-adjustable drawbar * Jost landing gear at the front * External folding supports at the rear * Toolbox made of galvanized sheet steel approx. 650 x 350 x 320 mm mounted laterally right (black powder-coated) * Side underrun protection * Plastic quarter-mudguards * 15-pin electrical connector * LED tail lights Fpjdpfx Ajpk D D Hel Hjg * Reinforcement package for drill rig transport on chassis – load height +20 mm * 50 mm softwood floor, clamped design * Preparation for subsequent fitting of container locks in front of the bulkhead * Bolt-on front wall made of smooth steel sheet * Trapezoidal-profiled side walls made of steel sheet, foldable with drop-side spring assists * Steel rear wall, retractable between the ramps – storage bracket inside front wall when not in use * Bolted rear stanchions * Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm * Option to install 3 t folding lashing rings every 600 mm * In each front and rear corner, 1 x 10 t lashing ring, front and end beams with multiple holes for 1.2 t lashing points * One-piece mechanical grated ramps with spring system for single-person operation, approx. 2,750 x 620 mm (collapsible to 20 mm) * Rear approach angle approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, rear folding supports, and ramps hot-dip galvanized * Axles, springs, air reservoirs, and landing gear painted black * Wheelbase: 1,310 mm * Tires: 235/75R17.5 * Drop-side panels painted RAL 9010 pure white * Side panels can be painted in any RAL color at extra cost * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 11.9: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange drawbar eye ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic quarter mudguards * Plastic toolbox front right, mounted outside on the front wall ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Area: * Loading length: 6.27 m * Suitable for container transport * 50 mm softwood flooring * Bracket in front of the front wall for subsequent installation of container locks * Bolted front wall made of smooth sheet metal * Side walls made of trapezoidal-profiled steel sheet, foldable with drop-side spring assists * Steel rear wall, stowable between the ramp mounts, if not in use, on the inside in front of the front wall * Bolted rear stanchions ----Load Securing: * Perforated outer frame, bent approx. 45 degrees, with 2 t lashing capacity every 480 mm * Installation of 3 t recessed lashing rings possible every 600 mm * In the corners, front and rear, each 1 x 6.3 t lashing ring Fpodpfx Alorvvfws Heg * Various holes in the front and rear crossmembers for 1.2 t lashing options ----Ramps: * One-piece mechanical loading ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (can be pushed together up to 20 mm) * Rear approach slope approx. 860 mm ----Tyres: * Tyres: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, front wall, rear wall, rear stanchions, and loading ramps * Sideboards painted in RAL 9010 pure white * Painting of side walls in any RAL colour available at extra cost ----Information: * Errors and interim sale reserved * New vehicle with manufacturer's warranty ----Delivery time: Available from calendar week ?

Stanje: novo, največja dovoljena obremenitev: 14.550 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2024, * ETÜ-TA-R 19.0: * Wabco EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 ton Gigant axles * Air suspension * Drawbar with 50 mm flange towing eye and height-adjustable drawbar * Jost landing gear at the front * External folding supports at the rear * Toolbox made of galvanized sheet steel, approx. 650 x 350 x 320 mm, mounted on the right side (powder-coated black) * Lateral underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED tail lights * Reinforcement package for drilling rig transport at the chassis – loading height + 20 mm * 50 mm softwood floor, clamped version * Pre-fitted device in front of the bulkhead for subsequent installation of container locks * Bolted bulkhead made of smooth sheet metal * Drop-side walls made of trapezoidal-profiled steel, foldable with drop-side spring-assisted lifting device * Steel rear wall, can be slid in between the ramps – mounting bracket for storage in front of the bulkhead when not in use * Bolted rear stanchions * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * In each front and rear corner: 1 x 10 t lashing ring; various holes in front and rear cross members for 1.2 t lashing options * One-piece mechanical grating-type ramps with spring mechanism for one-man operation, approx. 2,750 x 620 mm (can be slid together up to 20 mm) * Rear approach angle approx. 860 mm Fsdpfx Alspk D Nco Hjpg * Chassis, drawbar, bulkhead, tailgate, rear folding supports, and ramps hot-dip galvanized * Axles, springs, air reservoirs, and landing gear painted in a shade of black * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 * Drop-side panels painted in RAL 9010 pure white * Side panels can be painted in a RAL colour of your choice at extra cost * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available from Egestorf

Stanje: rabljeno, skupna masa: 13.500 kg, konfiguracija osi: 2 osi, prva registracija: 02/2018, dolžina tovornega prostora: 5.060 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2018, MUELLER MITTELTAL Priklopnik (KIPER) 5,06 m Uvožen / BREZ NESREČ V ZELO DOBREM STANJU! ? LETNIK IZDELAVE: 2018 ZRAČNO VZMETENJE VELIKOST PNEVMATIK: 385/55R19,5 MEDOSNA RAZDALJA: 115 PLATFORMA: 506 x 242 x 50 m SKUPNA MASA: 13.500 kg NOSILNOST: 6.350 kg TEL: KUBA – POLJSKO, ANGLEŠKO, NEMŠKO, ITALIJANSKO SEBASTIAN – POLJSKO, NEMŠKO, ITALIJANSKO, ????? LASZLO – MADŽARSKO COSTEL – ROMUNSKO? (Pri nas uredimo vse izvozne formalnosti, vključno s številko) Fpjdpfxjy E Ecns Al Hog RADEK – ?????

Stanje: novo, največja dovoljena obremenitev: 13.830 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 900 mm, Leto izdelave: 2026, * KA-TA-R 18 ----Brakes: * EBS-E (electronic braking system with RSS) * Emergency release for spring-loaded cylinders * Drum brakes ----Axle: Fpedsx Ipbyjpfx Al Hog * 2 x 9 t Gigant axles ----Suspension: * Air suspension with level control during tipping ----Electrics / Lighting: * Tire pressure monitoring system with display possibility in the truck dashboard via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting with galvanized protective cover * 2 LED reversing lights ----Drawbar eye / Drawbar: * Drawbar with 50 mm flange towing eye (adjustable by +77 mm and -33 mm using offset plate) ----General attachments: * Landing leg at the front * Foldable galvanized steel underrun guard for paver feeding * Enclosed single plastic mudguards * Front wall platform made of grating with step on drawbar and handholds on the front wall ----Chassis: * Chassis made of fine-grain steel ----Tipper body: * Steel 3-way tipper body with continuous asymmetrical aluminum side walls – without center stanchion – pendulum-mounted with manual central locking, left side foldable with side board spring lifter * Tailgate – made from HBW 400 steel – pendulum-mounted with automatic 2-claw lock * 5 mm steel floor made from HBW 450 steel ----Load securing: * 4 x 3 t lashing rings per side – recessed and foldable – integrated into the steel floor ----Roll tarp: * Roll tarp – agate grey, similar to RAL 7038 * Tarpaulin tensioning using ratchet tensioners on the sides and tensioning rubber at the front and rear ----Painting: * Chassis, underrun guard, and drawbar hot-dip galvanized * Axles, air tanks, landing leg, and flange towing eye painted in a shade of black * Side wall painting according to RAL color of choice (excluding special or metallic paints); color can be changed up to approx. 6 weeks before completion ----Info: * Reinforced and certified body according to EN 12642 XL, including load securing certificate up to 19 t * New vehicle without first registration, with manufacturer’s warranty * Subject to errors and prior sale * Sample images (vehicle images may vary due to special equipment) ----Delivery time: * Vehicle available from week 42/2026

Stanje: novo, največja dovoljena obremenitev: 8.650 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * KA-TA-R 11.9 Masterline ----Brakes: * Wabco EBS * Emergency release device for spring brake chambers * Drum brakes Fpsdsq Euagepfx Al Hsg ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange-Towing Eye: * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * Multivoltage * 15-pin power connector * 12V 13-pin auxiliary cable * Extended connection cables for forestry and agricultural towing vehicles * LED tail lights ----General Attachments: * Mechanical landing gear at front * Rear: 2 mechanical foldable supports * Plastic toolbox, right side * 2-step access step, front left (in direction of travel) * Bolt-on underrun protection * Plastic quarter mudguards ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking mounts, plus 2 on the front wall * Steel pallet, 3-way tipper body (continuous side walls - without central stanchions - foldable with side wall spring assist, tailgate foldable and swinging via manual central locking) * 4 mm steel plate floor * Rear mounting rail for loading ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * Plus 4 x 3 t recessed lashing points per side in the outer frame ----Ramps: * 1 pair aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading platform, integrated in the chassis ----Tyres: * Tyres 385/55 R 19.5 ----Paintwork: * Chassis, drawbar, tipper body, front wall, foldable supports, and rear stanchions hot dip galvanized * Axles, springs, air tanks, flange towing eye, and landing gear painted in a shade of black * Side boards painted in RAL color of your choice (excluding special or metallic paint); color can be changed up to approx. 6 weeks before completion ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer warranty * Subject to errors and prior sale * Sample images ----Delivery time: * Available from approx. calendar week 28 / 2026

Stanje: novo, največja dovoljena obremenitev: 8.650 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * KA-TA-R 11.9 Masterline ----Brakes: * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem compensation unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm, with 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tyre pressure monitoring system * Multivoltage * 15-pin power connector * 12 V 13-pin supplementary cable * Extended connection cables for forestry and agricultural towing vehicles * LED tail lights ----General Attachments: * Mechanical support winch at the front * Two mechanical folding supports at the rear * Plastic toolbox mounted on the right side * Two-step access ladder, front left in direction of travel * Bolt-on underrun protection * Plastic quarter mudguards ----Tipper Body: * Mesh hooks on the sides and rear at the central locking bearings, plus 2 pieces at the front wall * Steel pallet—3-way tipper body (continuous side panels—no centre stanchions—fold-down with side panel spring assist, tailgate foldable and swinging via manual central locking) * 4 mm steel floor * Rear ramp mounting rail ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t recessed lashing rings per side in the outer frame Fpedpfx Alel Thw Ie Heg ----Ramps: * 1 pair of aluminium ramps, approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment beneath the loading area integrated into the chassis at the rear ----Tyres: * Tyres 385/55 R 19.5 ----Paint: * Chassis, drawbar, tipper body, front wall, folding supports, and rear stanchions hot-dip galvanised * Axles, springs, air tanks, flange towing eye, and support winch painted in black tone * Sideboard paintwork in preferred RAL colour shade (excluding special or metallic paints), changeable up to 6 weeks before completion ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to prior sale and errors excepted * Sample images ----Delivery Time: * available from approx. week 28 / 2026

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2025, * T3 Profi 30.0: * EBS braking system * RDÜ tire pressure monitoring * Emergency release mechanism for spring brake cylinders * Drum brakes * 3 x 11t Gigant axles Fsdpfel Th I Asx Al Hspg * Parabolic springs, mechanical axle compensation at the rear * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning board sets at front and rear * Front: closed plastic mudguards; Rear: straight, galvanized sheet steel skirts, each with spray protection * Reflective contour tape on the sides and rear * Tool box made of galvanized sheet steel, powder-coated black, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for tool box within the turntable platform * Multi-voltage wiring * LED tail lights * Rear warning beacon (detachable) * Drawbar with 50 mm draw eye and height adjustment via tension spring & turnbuckle * 15-pin electrical socket * Four stake pockets per side (stakes not included), also usable as lash points * Load securing package comprising: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform, 6 pairs of UVV-certified lashing rings, swiveling and retractable, loadable in all directions, recessed into the outer frame; corner rings: 13.4 t, other rings: 10 t * 6 pairs of mechanical folding extensions for 3 m total width (not at the rear slope) * Widening boards stored at the center of the load floor * One-piece, hot-dip galvanized hydraulic access ramps (approx. 3,000 x 720 mm), manually adjustable sideways * 4-way valve block for hydraulic side ramp retrofit * Platform above turntable: approx. 1,960 x 2,520 mm * Unladen platform height: approx. 1,070 mm * Rear platform: approx. 6,500 x 2,520 mm * Unladen platform height: approx. 910 mm (incl. 860 mm drive-on angle) * Chassis, turntable, drawbar, and access ramps hot-dip galvanized * Axles, springs, air tanks, and related components painted in black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Permissible total technical weight: 30,000 kg * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from week 11/2026

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profi 30.0: * EBS braking system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical rear axle equalization * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Reflective contour marking tape on the sides and rear * Tool box made of galvanized sheet steel – black powder-coated – approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED tail lights Fsdpfx Aol Th Nnel Hepg * Rotating beacon (removable) at the rear * Drawbar with 50 mm towing eye and height adjustment via drawbar spring & turnbuckle * 15-pin electrical plug * Four stake pockets on each side (no stakes included), with integrated lashing option * Load securing package consisting of: 2 lashing rings (6.4 t) at the front left & right on the main frame of the turntable platform, 6 pairs of UVV-compliant lashing rings, swiveling and retractable, loadable in all directions and recessed in the outer frame – 13.4 t in the corners, otherwise 10 t. * 6 pairs of mechanical folding outriggers for 3 m overall width (not on the rear slope) * Widening boards stored in the center of the loading area * Hot-dip galvanized one-piece hydraulic ramp (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-section control valve block for retrofitting hydraulic side ramp shifting * Loading area above turntable: approx. 1,960 x 2,520 mm * Loading height unladen: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Loading height unladen: approx. 910 mm (including 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Technical gross vehicle weight of up to 30,000 kg possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from week 11/2026

Stanje: rabljeno, največja dovoljena obremenitev: 17.500 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2005, naslednji pregled (TÜV): 01/2027, širina tovornega prostora: 2.500 mm, ? Hidravlične rampe ? Razširljive ? 8 pritrdilnih ušes na vsaki strani ? Nosilec za rezervno kolo ? Nakladalna višina: ca. 930 mm ? Bobnasta zavora ? Duomatski priključek ? Listnato vzmetenje ? Dvojna kolesa Vse informacije brez jamstva / Možen vmesni prodaj. Fpedpeytz Hwjfx Al Hsg

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem | Low Loader | Platform | Trailer Available immediately | Reference number for inquiries: 11611 | Delivery to your address possible * We are happy to provide you with an individual offer * ---- * Gross weight: 14.4 t, Payload: 10.95 t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27 m x 2.47 m platform with galvanized 400 mm front wall * Excavator bucket rest made of hardwood, bolted to the front wall * Floor height unladen 930 mm / laden 870 mm * One-piece ramps with hot-dip galvanized grid surface, slip-resistant design, retractable down to approx. 20 mm. Secured by retaining bar and diagonal brace * Ramp lifter with upright, adjustable springs for easy one-man operation * 4 UVV drop lashings (LC 6300 daN) * Perforated outer frame (45°-bent with hole pattern for lashing equipment, lashing force per lashing point LC 2000 daN at a minimum spacing of 480 mm. Installation of drop lashings LC 3000 daN at approx. 600 mm spacing possible), closely spaced cross-stiffeners, high-ribbed front and rear closure with rear loading ramp, hot-dip galvanized * 10 UVV lashing rings LC 3000 daN retractable in the existing hole grid in the outer frame, additional * Additional lashing options via bore holes (Ø 50 mm, LC 1200 daN) in the front and rear crossmembers * Toolbox in front of the front wall * Side marker lights with indicator function * 50 mm thick softwood floor. Chassis hot-dip galvanized Fodpfsyndh Hsx Al Hjpg * Height-adjustable landing gear at the front, folding supports at the rear * Retrofitting of 2 container locks possible * Drawbar with 40 mm towing eye (hot-dip galvanized), height adjustable, 50 mm eye possible on request * 1 removable LED warning light at the rear * ---- * Leasing, hire purchase, financing, trade-in possible * Example: 510 euros for 60 months’ term, no down payment, no final installment * ---- * Our opening hours: * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 Outside of business hours, viewings possible by appointment. We speak German, English, Polish, and French Leasing, financing, trade-in possible

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem Low Loader ? Platform ? Trailer Fsdpfx Aeyadz Rol Hspg Immediately available | Inquiry No.: 27678 | Delivery to your address possible * We are happy to provide you with an individual offer * ---- * GVW: 14.4t, Payload: 10.95t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27m x 2.47m platform with galvanized front wall, 400mm high * Excavator bucket rest made of hardwood, bolted to the front wall * Deck height unladen 930mm / laden 870mm * One-piece ramps with hot-dip galvanized grid grating, anti-slip design, can be pushed together to approx. 20 mm, secured by retaining rods and diagonal supports * Ramp lift with vertically mounted, adjustable springs for easy single-person operation * 4 UVV drop lashing rings (LC 6300 daN) * Perforated outer frame (45° angled with hole pattern for lashing equipment, lashing force per point LC 2000 daN with a minimum spacing of 480 mm. Installation of drop lashing rings LC 3000 daN at approx. 600 mm intervals possible) with close cross profiling, high-webbed front and rear closures and rear drive-on slope, hot-dip galvanized * 10 UVV lashing rings LC 3000 daN, retractable into existing hole grid in outer frame, additionally * Further lashing points by drilled holes (Ø 50 mm, LC 1200 daN) in the front and rear crossmember * Toolbox in front of the bulkhead * Side marker lights with indicator function * Softwood floor, 50 mm thick. Chassis hot-dip galvanized * 2 container locks recessed in the front crossmember * Height-adjustable telescopic landing gear at the front, fold-down supports at the rear * Drawbar with 40 mm towing eye (hot-dip galvanized), height adjustable; 50 mm eye available on request * 1 removable LED warning beacon at the rear ---- * Leasing, hire-purchase, financing, trade-in possible * For example: 515 euros at 60 months term, no down payment, no final installment * ---- * Our opening hours * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 Outside opening hours available by appointment We speak German, English, Polish, French Leasing, financing, trade-in possible

Stanje: rabljeno, lastna masa: 3.650 kg, največja dovoljena obremenitev: 10.750 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 07/2011, naslednji pregled (TÜV): 08/2024, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.430 mm, višina nakladalnega prostora: 900 mm, vzmetenje: zrak, velikost pnevmatike: 285/70R19.5, barva: bela, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 2 axles, tandem, air suspension, ABS (anti-lock braking system), tailgate, lashing eyes, underrun protection, front support legs, rear support legs, pendulum tailgates, height-adjustable drawbar. Body: Tandem 3-way tipper trailer with aluminium sideboards, 2x Gigant axles, drum brakes! Fpsdpfjth Uavsx Al Hog Loading ramps available at an additional cost of €990.00 net! ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors excepted!

Stanje: novo, največja dovoljena obremenitev: 29.850 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Last axle is a trailing steering axle with electro-pneumatic steering lock, activated by PIN in reverse gear * Additional lock for the trailing axle operated from the tractor unit for shunting purposes – no installation necessary on the truck side – assigned to PIN 10; the lock must be deactivated before driving on public roads ----Suspension: * Air suspension with raise and lower function and Ride-on-Road (RtR) feature ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck's display via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights activated via reverse gear * SmartBoard installed as an info tool with pressure sensors exclusively for total axle load display Fpodpfxsykx I He Al Hjg * 7-pin socket at the rear for extended-length lighting * LED beacon (removable) at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing legs * Galvanised sheet steel mudguards * Swivel arm as carrier for connecting lines in front of the front panel ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Platform: * 50 mm floor covering made from larch / Douglas fir instead of spruce / fir * Rear bevel – 700 mm long – on the semi-trailer platform to the low-bed section with checker plate covering, and at the end a perforated strip for attaching aluminum approach ramps * Tread plate covers over the wheels * SP combo package: toolbox with 45° corners made from galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, located on the semi-trailer platform approx. 2,480 x 500 mm * Folding lid on top as well as side doors in the angled corners * Foldable aluminum side boards 500 mm high on the semi-trailer platform, including foldable and removable rear stanchions * Inserted aluminum rear wall, 150 mm high * Second kingpin position * Preparation for container locking * Preparation for 3 recesses in the approach bevel from the low-bed to the gooseneck * Preparation for retrofitting folding outriggers for 3 m widening by welding the mounting brackets into the outer frame ----Load Securing: Semi-trailer platform: * In the front corners and front, 50 mm drilled holes for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed in the floor on the sides towards the approach slope * Perforated outer frame, 45° folded with hole pattern for lashing points (2 t lashing points every 480 mm) * On each side, 2 x 6.3 t retractable lashing rings recessed in the outer frame Low-bed platform: * 2 x 16.5 t lashing rings centrally positioned directly in front of the approach ramp to the gooseneck and recessed * On each side, 3 pairs of 13.5 t lashing rings and 5 pairs of 10 t lashing rings recessed in the outer frame * On each side, 4 stake pockets recessed in the outer frame * Profifix lashing rail in the center along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last rigid axle to the rear crossmember, W = 770 mm, D = 270 mm (on each side, 2 x 6.4 t lashing rings solid welded in the excavator arm rest) ----Ramp: * Hydraulic one-piece "ALLTEC" aluminum approach ramps, approx. 3,200 x 750 mm * Load capacity 13 t per ramp (load capacity 26 t/pair) * Hydraulic ramp

Stanje: novo, največja dovoljena obremenitev: 29.850 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rear axle as trailing steering axle with electro-pneumatic steering lock via reverse gear PIN * Additional trailing axle lock, operable from the cab for maneuvering purposes – no truck-side installation required – assigned to PIN 10; lock must be disengaged before driving on public roads ----Suspension: * Air suspension with lift and lowering function as well as RtR function ----Electrics / Lighting: * Tire pressure monitoring system with display option in truck instrument cluster via EBS signal – no truck-side installation required * LED rear lights 12 / 24 V * Flashing side marker lights * LED reverse lights, activated via reverse gear * SmartBoard mounted as an infotool with pressure sensors exclusively for total axle load indication * 7-pin socket at the rear for overlength lighting * Removable LED beacon at the rear Fodpoykx I Tsfx Al Hopg ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as a carrier for connection cables in front of the front bulkhead ----Warning System Package: * Mechanically adjustable warning sign package ----Low Loader Platform: * 50 mm flooring made of larch / Douglas fir instead of spruce / fir * Rear inclined section – 700 mm long – on the saddle platform to the low-bed with checker plate surface and at the end a perforated strip for hanging aluminum loading ramps * Tread plate covers above the wheels * SP-Combo Package: Tool box with 45° corners, made of galvanized steel and additionally powder-coated in RAL 9006 white aluminum, on the saddle platform approx. 2,480 x 500 mm * Hinged lid on top and side doors in the slanted corners * Fold-down aluminum side walls, 500 mm high, on the saddle platform, including rear stakes, foldable and removable * Inserted aluminum rear wall, 150 mm high * 2nd kingpin position * Prepared for container locks * Prepared for 3 mounting shafts in the inclined section from the low-bed to the gooseneck * Prepared for retrofitting fold-out supports for 3 m extension by welding in receptacles on the outer frame ----Load Securing: Saddle Platform: * Front corners and forward 50 mm bores for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed in the floor towards the inclined ramp * Perforated outer frame, 45° angled with hole pattern for tie-downs (2 t lashing points every 480 mm) * Each side with 2 x 6.3 t retractable lashing rings recessed in the outer frame Low Loader Platform: * 2 x 16.5 t lashing rings centered directly before the inclined section to the gooseneck, recessed * Each side with 3 pairs 13.5 t and 5 pairs 10 t retractable lashing rings recessed into the outer frame * Each side with 4 stake pockets recessed in the outer frame * Profifix lashing rail centered in the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From end of last rigid axle to end crossmember W = 770 mm, D = 270 mm (each side with 2 x 6.4 t lashing rings permanently welded into the excavator arm rest) ----Ramp: * Hydraulic one-piece “ALLTEC” aluminum ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per set) * Hydraulic ramp shifting on sliding tube for ramp shaft ----Hydraulics: * Hydraulic flow divider in the trailer (for lorry hydraulic pump output exceeding 40 l/min up to max. 250 l/min), climbing strips on t

Stanje: novo, največja dovoljena obremenitev: 8.410 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2025, * KA - TA - R 11.9 ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flange eye ----Electrics / Lighting: Fpodpfjxf Skpex Al Hjg * Tyre pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear (controlled via reverse gear) ----General Attachments: * Mechanical BPW landing gear at front * 2 mechanical fold-down support legs at rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted at the front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of the front wall on the left side ----Chassis: * Chassis made of fine-grained steel ----Tipper Body: * Net hooks at the mounting points of the central locking system and 2 on the front wall * Steel pallet three-way tipper body with reinforced 600 mm "Strong" side walls * Continuous side panels at the top with inner tube reinforcement (without central stanchions), foldable with tailgate spring assist * Bolt-on rear corner posts * Combination steel double-leaf rear door, two-wing, asymmetrically divided, swivels and lockable to 270°, not foldable, with additional swinging frame for automatic rear door opening during tipping * Rear locking through galvanized rotary bar lock and central locking * Deactivation function for automatic rear door function when tipping backwards with open double-leaf door * Mounting rail at the rear for loading ramps ----Load Securing: * Each corner: 1 x 5 t lashing ring, plus 4 x 3 t lashing eyes recessed in the outer frame on each side * 4 mm sheet steel floor made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair) suitable for rubber-tyred and tracked vehicles * Lockable storage compartment under the loading area, recessed in the chassis, accessible from the rear ----Paintwork: * Chassis, drawbar, tipper body, front wall, underrun protection, rear stanchions, rear support legs, and entry step hot-dip galvanized * Side panels and tailgate painted in RAL 3003 ruby red * Axles, springs, air tank, and landing gear painted in a black tone ----Info: * Reinforced body with cargo securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * RAK 18.0 External Roller with Rear Tipping Function Fpsdpfjx Ipbmex Al Hsg ----Brake System: * Wabco EBS-E (electronic brake system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * BPW Eco Plus axles ----Suspension: * Air suspension (automatic lowering when the brake is disengaged) ----Drawbar: * Pneumatically lowerable drawbar approx. 2,100 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle ----General Attachments: * Plastic toolbox – approx. 858 x 500 x 500 mm – mounted on the right side * Enclosed plastic mudguards front & rear axles * Enclosed side underrun protection * Rear underrun protection bolted * Storage box for container nets made of galvanized perforated sheet approx. 1,000 x 500 x 500 mm * Foldable "A"-sign at the rear * Rear impact protection buffers ----Electrics / Lighting: * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * 15-pin 24V power connector * LED lighting system for 12 & 24V * Two additional LED reversing lights * TPMS (Tire Pressure Monitor System) ----Suitable for Container Lengths: * suitable for containers from 6500mm to 7000mm ----Container Running Surface / Tipping Bridge: * External roller guide through flat steel rails with a clear width of approx. 2,180 mm combined with three lateral centering pieces on each side for container guidance * To support and stop the container rollers, two rear, recessed, tipping frame-mounted roller bearings with pneumatically operated longitudinal securing are supplied * The positive locking of roll-off containers is accomplished via a front-installed, externally controlled, pneumatic cross clamping unit (one-sided operation) * Inner chassis with rearward-tipping main frame - engine hydraulically powered tipping device (single-cylinder design) * Tipping angle 42° * Rubber pads between chassis and tipping frame * Containers are loaded from the front, hot-dip galvanized chassis ----Tyres: * Single tyres 385/55 R 22.5 ----Loading Height: * Unladen approx. 1,270 mm ----Paintwork: * Underrun protection and locking parts (without final coat) * Bogie, air tanks, axles, slewing ring and drawbar painted in black tone * Hot-dip galvanized ----Information: * For container transport according to DIN 30722 Part 1 * New vehicle without initial registration with manufacturer's warranty * Subject to errors and prior sale * Sample images (vehicle images may differ due to optional equipment) ----Delivery Time: * Available from week 24/2026

Stanje: novo, največja dovoljena obremenitev: 8.410 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2025, * KA - TA - R 11.9 ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles Fpedpoxf Skvsfx Al Hog ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flange eye ----Electrics / Lighting: * Tyre pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear (controlled via reverse gear) ----General Attachments: * Mechanical BPW landing gear at front * 2 mechanical fold-down support legs at rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted at the front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of the front wall on the left side ----Chassis: * Chassis made of fine-grained steel ----Tipper Body: * Net hooks at the mounting points of the central locking system and 2 on the front wall * Steel pallet three-way tipper body with reinforced 600 mm "Strong" side walls * Continuous side panels at the top with inner tube reinforcement (without central stanchions), foldable with tailgate spring assist * Bolt-on rear corner posts * Combination steel double-leaf rear door, two-wing, asymmetrically divided, swivels and lockable to 270°, not foldable, with additional swinging frame for automatic rear door opening during tipping * Rear locking through galvanized rotary bar lock and central locking * Deactivation function for automatic rear door function when tipping backwards with open double-leaf door * Mounting rail at the rear for loading ramps ----Load Securing: * Each corner: 1 x 5 t lashing ring, plus 4 x 3 t lashing eyes recessed in the outer frame on each side * 4 mm sheet steel floor made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair) suitable for rubber-tyred and tracked vehicles * Lockable storage compartment under the loading area, recessed in the chassis, accessible from the rear ----Paintwork: * Chassis, drawbar, tipper body, front wall, underrun protection, rear stanchions, rear support legs, and entry step hot-dip galvanized * Side panels and tailgate painted in RAL 3003 ruby red * Axles, springs, air tank, and landing gear painted in a black tone ----Info: * Reinforced body with cargo securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Immediately available ex Egestorf