Gheysen & Verpoort , Gelenkt, Hydr. Rampen, Luft nakup rabljenega (3.337)

Stanje: novo, skupna masa: 55.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Leto izdelave: 2025, Oprema: ABS, You can find our complete range of vehicles, including those available for immediate delivery or short notice, on our website. Below is an excerpt from the equipment specification. The complete specification is available upon request. CARGO AREA: * Gooseneck, length approx. 4,300 mm, with central beam * Cargo area with double-extending design, length approx. 9,300 mm * A support table approx. 200 mm wide is solidly welded to the central beam * Pneumatic locking with conical locking bolt and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the relevant cargo bed length (except the supply for the first locking point) * Technical fifth wheel load: 25,000 kg For tractor units: 4 x 2, 6 x 2, and 6 x 4 * TPMS tire pressure monitoring system compliant with ECE R 141 * BPW axles and suspension, all axles hydro-mechanically forced steered, mounted on turntable * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * 275/70 R 22.5 3PMSF twin tires. Make: our choice * ASPÖCK UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for hydraulic operations. No supply connections installed on the tractor unit * 4 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable outward * 1 pair of lashing rings at the kingpin (LC 10,000 daN), all other lashing rings (LC 5,000 daN) * 4 pairs of stake pockets embedded in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 transverse stake pocket rail mounted on the deck of the gooseneck for plug-in stakes approx. 100 x 50 mm; 1x at rear of gooseneck Rsdpfsxc Axxsx An Eet * 2-inch kingpin * Mechanical landing legs with 2-speed gearbox and crank * Approx. 32 mm wood flooring on the gooseneck and cargo area encased in ALU-omega profiles * 10 pairs of recessed lashing rings lying in the outer frame of the cargo area, foldable outward: - 1 pair of lashing rings each in front of the last axle and on the end traverse of the trailer (LC 10,000 daN) - all other lashing rings (LC 5,000 daN) * 8 pairs of stake pockets embedded in the outer frame of the cargo area, for plug-in stakes approx. 100 x 50 mm * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the cargo area on the left * Steering from front and rear via cable remote control, with single-track control of the axles, without installation on the tractor unit * Front wall made of steel, approx. 1,800 mm high, certified version according to EN12642:2016 XL * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * 1 LED work light mounted left and right at the landing legs, wired to the tractor unit connection * 3 transverse stake pocket rails mounted on the cargo area floor, for plug-in stakes approx. 100 x 50 mm * 1 additional removable intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with hardwood covering * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the cargo area on the right * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the cargo area on the left * WADER container pockets integrated in the cargo area for the transport of: - 1 x 20' container at the center of gravity - 2 x 20' containers - 1 x 40' container * 1 LED work light each left and right in front of the axles

Stanje: novo, lastna masa: 15.900 kg, največja dovoljena obremenitev: 63.500 kg, skupna masa: 68.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.700 mm, širina tovornega prostora: 2.740 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75/r17,5, barva: siv, obratovalna teža: 52.100 kg, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimal load bed length, approx. 3,300 mm long, rear with taper approx. 1,000 mm x 10° Technical fifth wheel load: 23,000 kg For tractor units: 6x2, 6x4, and 8x4 Load bed: Extendable load bed, approx. 9,400 mm long with rear taper approx. 500 mm x 10° A recess in the load bed as well as in the tapering section for accommodating the excavator dipper stick, approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking bolt and reinforced locking positions, service lines are protected within the extendable beams and automatically adapt to the respective bed length Axles and Tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool 235/75 R 17.5 3PMSF twin tires Load index 143/141J (144/144F) Two-piece steel ramps: One pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide Hardwood covering Hydraulically folding ramp tips, each ramp hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward Braking system: Braking system by WABCO EBS-E according to EU regulations Sockets and lighting: 24-volt lighting system Full metallization: Complete HRM metallization with ZINACOR 850 for optimal corrosion protection Surface treatment: Entire steel structure automatically blast cleaned with shot blasting after welding Second blasting treatment with corundum for optimal coating adhesion Final painting: 2 coats of 2-component paint in Novagrau, followed by sealing of cavities with special wax Rodpfxemfqi Ij An Est Rims in silver-grey Steel construction: Steel construction from high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Plug-in steel front wall, approx. 400 mm high Connection rail for service lines to the tractor unit Spiral cable for supplying the electro-hydraulic unit and/or electric winch between trailer and tractor unit, with plug for the electro-hydraulic unit to control hydraulic operations, except for hydraulic winches Outer beam of gooseneck with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, thereafter approx. every 400 mm One mounting hole in the rear upper area of the outer gooseneck beam for a bolted lashing ring Approx. 40 mm thick hardwood floor on the gooseneck, checker plate floor over the kingpin Guide plate on gooseneck for the fifth wheel plate, approx. 500 mm wide On the load bed, continuous and between the axles intermittent approx. 50 mm thick hardwood floor Load bed locking with conically welded locking profiles every 250 mm, including preload plate Slotted holes for attachable and movable bridging elements: on the fixed section behind the gooseneck at the front of the load bed 1 movable intermediate table for the extension tube with large cross-section Control valves for the hydraulic ramps on the right side of the vehicle Central lubrication system with 1 pump, standard grease according to NLGI-2 Radio remote control for steering operation, in addition to cable remote control, with 2 control lights on the receiver for single-track steering monitoring

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Braking system: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: Rjdpfx Anjrwc R Ro Eet * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension of 250 mm for a total length of 2,250 mm ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck cab via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for tractors with 12 and 24 V electrics ----General attachments: * Landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead exterior * Side underrun protection * Plastic quarter mudguards ----Low-bed loading area: * 50 mm softwood floor * Pre-equipment in front of the bulkhead for subsequent installation of container locks * Bolted 400 mm bulkhead made of smooth sheet * Rear stakes bolted * Drop sides with spring-assisted lifting mechanism ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Optional installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing point in each of the front and rear corners * Various drill holes in the front and rear cross members for 1.2 t lashing options * Profifix lashing rail along the centre longitudinal axis, for lashing up to LC 3,000 daN ----Ramps: * One-piece hydraulic grid ramps approx. 2,750 x 600 mm (collapsible to 20 mm spacing) * Hydraulic flow divider in the trailer (when hydraulic pump output in truck exceeds 40 l/min, max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical rear supports and ramps hot-dip galvanized * Axles, springs, air tanks, landing gear and flange eye painted in black * Drop sides painted in RAL 9010 pure white * Side walls available painted in any RAL colour for an additional charge ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery time: * Available from approx. week 16/2026

Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with raising/lowering system and RtR valve * Manometer pressure display for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel sets front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight galvanized steel skirts with spray protection * Reflective contour markings on sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at rear * 2 LED reversing lights (activated via reverse gear) * Tow bar with 50 mm towing eye and height adjustment * Tool box made of galvanized steel, black powder coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Extension in front of turntable platform approx. 490 mm long with 45° corners * ROBOTER-welded anti-slip coating on the turntable platform steel plate * Load securing package consisting of: 1 x 13.4 t UVV lashing ring front left & right in front of bulkhead support, 4 mounting holes per side in the turntable platform each with 2 t lashing capacity, 1 pair of 13.4 t lashing rings suspended at rear left & right before the rear cross member, 4 pairs of 10 t UVV lashing rings per side, swiveling and lowerable, loadable in all directions and recessed into side frame, 3 stake pockets per side with 2 t lashing option each * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (not on the rear slope) * Timber plank holder for width extensions under the chassis, longitudinal left * Excavator arm rest above rear axle up to end plate, approx. 2,100 mm long and 190 mm deep, 2 pairs of 6.4 t lashing rings per side in the excavator arm rest * Hardwood flooring on the running surfaces of the low-loader platform * Hydraulically operated single-piece ramps (approx. 3,000 x 720 mm), mechanically adjustable width * Ramp outer planks made of hardwood * Steel construction prepped for 6-way control sliders * Unladen loading height approx. 950 mm +/- 20 mm (chassis) * Turntable, folding outriggers, mechanical support legs, ramps are hot-dip galvanized * -- Axles, air tanks, tow bar painted black -- Rjdol Tlhrjpfx An Ejt * Tyres 235/75 R 17.5 * Vehicle registered for one day in 07/2024, due to missing tire pressure monitoring system and was not loaded/used * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Braking system: * EBS (Electronic Braking System) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar, adjustable by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm ----Electrics / Lighting: * Tyre pressure monitoring with in-cab display via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General attachments: Rodpfx Anerwc R As Eet * Support winch at the front * Foldable external support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted at front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood floor * Prepared in front of bulkhead for retrofitting container locks * Bolted 400 mm bulkhead of smooth steel plate * Bolted rear posts * Side boards with spring assist ----Load securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing brackets every 600 mm * One 6.3 t lashing ring in each front and rear corner * Various drilled holes in bulkhead and rear cross member for 1.2 t lashing points * Profifix lashing rail, centrally along longitudinal axis, for load securing up to LC 3000 daN ----Ramps: * One-piece hydraulic grating ramps approx. 2,750 x 600 mm (can be retracted to 20 mm clearance) * Hydraulic flow divider in trailer (for hydraulic pump output in the truck of over 40 L/min to a max. of 140 L/min) ----Painting: * Chassis, drawbar, bulkhead, mechanical drop-down supports, and ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange drawbar eye painted black * Drop sides painted in RAL 9010 pure white * Side panels painted in RAL colour of choice at extra cost ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images ----Delivery time: * Available from approx. week 16/2026

Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 profile: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lowering function as well as return-to-ride valve * Pressure gauge for axle load determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning panels front and rear * Front axle: plastic quarter mudguards with spray guards * Rear axle: straight, galvanized steel side skirts with spray guards * Reflective contour marking tape, side and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable rear LED beacon * 2 LED reverse lights (controlled by reverse gear) * Drawbar with 50 mm towing eye and height adjustment Redpsl Tnu Aofx An Eot * Tool box made of galvanized sheet steel, black powder coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Front section ahead of turntable platform approx. 490 mm long with 45° corners * ROBOT-welded anti-slip coating on the steel plate of the turntable platform * Load securing package consisting of: 1 x 13.4 t UVV lashing eye left & right in front of front bulkhead support, 4 holes per side in the turntable platform for 2 t lashing capacity each, 1 pair of lashing eyes (13.4 t) hanging at the rear left & right in front of the end support, 4 pairs per side of UVV lashing rings (10 t) that can be swivelled and lowered, loadable in all directions and recessed in the outer frame, 3 stake pockets per side with simultaneous 2 t lashing possibility * Hot-dip galvanized mechanical fold-out outriggers for 3 m overall width (not in the rear slope) * Plank holder for extensions mounted longitudinally under the chassis on the left * Excavator arm rest over the rear axle up to the end cross member, approx. 2,100 mm long and approx. 190 mm deep, with 2 pairs per side of 6.4 t lashing eyes in the excavator arm rest * Hardwood floor on the running surfaces of the low bed platform * Hydraulically operated one-piece loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer boards of the loading ramps made of hardwood * Steel construction prepared for 6-valve control block * Loading edge unladen approx. 950 mm +/- 20 mm chassis * Turntable, fold-out outriggers, mechanical drop supports, loading ramps hot-dip galvanized * --Axles, air tanks, and drawbar painted in black shade-- * Tires 235/75 R 17.5 * The vehicle has a day registration from 07/2024, due to the lack of a tire pressure monitoring system, and has not been loaded or used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: rabljeno, lastna masa: 6.340 kg, največja dovoljena obremenitev: 23.660 kg, skupna masa: 30.000 kg, prva registracija: 03/1979, dolžina tovornega prostora: 8.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 920 mm, vzmetenje: jeklo, velikost pnevmatike: 8.25R15, barva: zelen, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Lokacija vozila: Bovenden, listnato vzmetenje, 3 osi, SAF osi, vrtljiva mizica, pritrdilni obroči, hidravlične rampe, zadnja podpora, dvojne pnevmatike Nadgradnja: 3-osna nizkopodna prikolica s hidravličnimi nakladalnimi rampami, 3x 10t osi SAF, bobnaste zavore! Dolžina rampe cca 2250 mm! Nakladalna višina cca 920 mm! PODATKI O OPREMI SO BREZ JAMSTVA, pridržujemo si pravico do sprememb, vmesne prodaje in napak! Redpjw Tm Itefx An Est

Stanje: novo, največja dovoljena obremenitev: 31.630 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.520 mm, * T 4: * EBS (electronic braking system) * Emergency release device for spring-loaded brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required * Warning panel packages front & rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * LED beacon (removable) on the rear * 24 V 15-pin, plus additional 12 V 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and stepless height adjustment * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, right-hand side * Closed single plastic mudguards at the front * Straight steel rear mudflaps each with spray suppression (splash suppression) * Side underrun protection * Extended drop member by 500 mm to the front * Turntable platform extended by 520 mm at the front with 45° corners and 3 integrated lockable storage compartments incl. lids * Chassis made of high-strength fine-grain steel * Floor over turntable platform: 50 mm, low-loader platform: 60 mm softwood * Outer planks of the loading ramps made of 50 mm bamboo wood * Four stake pockets per side (stakes not included), each with 2 t lashing capability * Load securing package includes: 2 lashing eyes 6.4 t front left and right on main turntable frame, side front and rear each 1 pair 13.4 t lashing rings on outer frame, 4 pairs per side 10 t swiveling and lowerable lashing rings loadable from all directions recessed in outer frame, 2 pairs 6.4 t lashing rings on each side in the excavator arm rest, 8 pairs galvanized folding outriggers for 3 meter total width (not at the rear bevel) * Widening planks stowed in a compartment on the left side * Excavator arm rest above the rear axle to end of approach ramp approx. 2,300 x 740 x 190 mm * Mechanical drop supports at the rear * Hydraulic, hot-dip galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp shift via sliding pipe from ramp shaft * Loading area over slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm Rsdperczm Dofx An Eot * Loaded platform height approx. 860 mm (incl. 860 mm approach ramp) * Chassis, turntable, loading ramps, mechanical folding supports rear hot-dip galvanized * Axles, springs, air reservoir and slewing ring painted in black tone * New vehicle with manufacturer's warranty * Errors and interim sale reserved * Available from CW 21 / 2026

Stanje: novo, največja dovoljena obremenitev: 31.630 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.520 mm, * T 4: * EBS (Electronic Braking System) * Emergency release device for spring-loaded brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation, front and rear * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * Warning sign packages front & rear Redpfx Anel Th Eve Est * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon, rear * 24 V – 15-pin and additional 12 V – 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and stepless height adjustment * Toolbox made of powder-coated sheet steel and spare wheel holder in basket design, mounted right side * Closed single plastic mudguards front * Rear straight steel mud flaps each with spray suppression * Lateral underrun protection * Extended offset crank by 500 mm to the front * Turntable platform front section extended by 520 mm with 45° corners and 3 integrated, lockable storage compartments with lids * Chassis made from high-strength fine-grained steel * Flooring over turntable platform made of 50 mm softwood, and in lowbed platform from 60 mm softwood * Outer boards of access ramps made of 50 mm bamboo * Four stake pockets per side (stakes not included), each with 2 t lashing point capacity * Lashing package consisting of: 2 lashing eyes 6.4 t on main frame of turntable platform (front left and right); 1 pair of 13.4 t lashing rings per side front and rear on outer frame; 4 pairs per side of 10 t pivoting and lowerable lashing rings, loadable in all directions, recessed in outer frame; 2 pairs of 6.4 t lashing rings on each side in the excavator arm recess; 8 pairs galvanized folding markers for 3 m overall width (not on rear slope) * Extension planks stored in left-side compartment * Excavator arm recess above rear axle to end of approach slope approx. 2,300 x 740 x 190 mm * Mechanical drop-down supports rear * Hydraulic, hot-dip galvanized access ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp adjustment via sliding tube from ramp shaft * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded loading height approx. 860 mm (includes 860 mm approach slope) * Chassis, turntable, loading ramps, mechanical folding supports rear hot-dip galvanized * Axles, springs, air tanks and turntable painted black * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from week 21/2026

Stanje: rabljeno, lastna masa: 10.000 kg, največja dovoljena obremenitev: 39.000 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2025, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, Oprema: ABS, dvižna zadnja plošča, For every used semi-trailer, you receive a current and comprehensive inspection and functionality report. Chassis: - Sturdy steel frame weldment with front frame camber and level loading platform, rear tapered edge approx. 500x100 mm - Neck 200 mm with beveled front corners - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area of the rear taper) - 2 king pin positions with replaceable 2" king pin - Outer frame closed outwards as a hole-type external frame - Load deck with extendable center frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm - Frame in front of and behind the division with 80x80 mm step - Reinforced frame version / point load in retracted position at center of gravity - With excavator trough (without covering), approx. 220 mm deep, approx. 600 mm wide, starting after 2nd axle to end of vehicle - 1 pair wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm Ramps: - 2 pieces 2-part loading ramps, special design with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting unit (only in combination with electro-hydraulic unit) - Width approx. 800 mm - Wood covering - Incl. traction ribs on loading ramps - Lockable in transport position with lashing straps - Operation by control lever mounted at rear right in frame - Laterally hydraulically adjustable Flooring: - 35 mm larch wood floor with aluminum omega profiles Axles, Steering and Tyres: - BPW air suspension axles, each with 10 t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lift and lowering device with total lift approx. 200 mm - 2nd driving height via ball valve +50 mm - 1st axle liftable (wired via EBS), automatic activation with mechanical emergency operation via button on trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, centrally aligned offset - 12 tyres, 245/70 R 17.5 143/141J, tubeless - Incl. tyre pressure monitoring Rodpfx Aexxl E Hon Est Accessories: - Plug-in side and rear boards on the gooseneck, approx. 400 mm high - Spare wheel carrier - Lateral aluminum underrun protection - 4 wheel chocks with holders - Long license plate holder on end cross member - 1 ECE sign insertable at rear - 11 pairs of 10t lashing modules on the side: - 2x on the gooseneck - 2x on the deck before extension - 7x after extension - Pull-out warning signs incl. 3 position lamps each, front at landing gear and rear before end cross member, continuously extendable up to deck width of 4,500 mm - 4 mountings for warning signs to be inserted into stake pockets on the deck - 6 pairs of stake pockets on the side for plug-in stakes 100x50 mm - 2 rows of crosswise stake pockets for plug-in stakes 100x50 mm on the gooseneck from outer frame inwards to main frame (1x before, 1x after king pin positions) - 3 rows of crosswise stake pockets for plug-in stakes 100x50 mm on deck from outer frame inwards to main frame (1x before extension, 1x after extension, 1x after 3rd axle) - 2 pairs of steel plates in the load deck for container locks to accommodate 1x 20ft container

Stanje: novo, največja dovoljena obremenitev: 37.619 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.240 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 3.570 mm, Leto izdelave: 2025, Oprema: ABS, Kässbohrer K.SLS 3 / 0N ? 18/30 | Year of Manufacture: 2025 | NEW | 40-t ramps | Top equipment Location: Germany Condition: New / unused Availability: Immediate Description: For sale: brand new Kässbohrer K.SLS 3 / 0N ? 18/30 low loader, year of manufacture 2025. Perfect for transporting construction machinery, equipment, and heavy goods. Robust chassis, high-quality axles, heavy-duty ramps – ready for immediate use. --- Technical Specifications Dimensions - Total length: 13,190 mm - Platform length: 9,240 mm - Platform height: 875 mm - Overall width: 2,550 mm (extendable by +600 mm with side extensions) - Gooseneck length: 3,950 mm - Unladen weight: approx. 10,381 kg Weights - Perm. total weight at 80 km/h: 48,000 kg - Perm. total weight at 60 km/h: 52,800 kg - Total axle load: 30,000 kg - King pin load: up to 18,000 kg --- Running Gear & Axles - 3 BPW axles, air suspension, drum brakes - 1 rear trailing axle - Lift axle (load-dependent + automatic control from the cab) - Tyres: 245/70 R17.5, M+S + 3PMSF - Tire pressure monitoring R141 - Wabco EBS 4S/3M, ABS + RSS - Wabco Smartboard (axle load, suspension, diagnostics, etc.) --- Ramps & Loading Area - Foldable 40-t drive-on ramps - Ramp length: 2,750 mm - Ramp width: 850 mm - Hydraulic sliding system - 45-mm hardwood floor + checker plate over wheel arches Rsdsx Efzuepfx An Eet --- Load Securing - Multiple lashing points, 8,000 daN and 13,400 daN - 7×2 stake pockets + plug-in stakes - Container locks for 1×20 ft - Front board 450 mm, side & rear walls made of aluminium --- Body & Chassis - High-strength S700 MC steel - Partial metallisation (Zn/Al 85/15) – superior corrosion protection - Rear angle: 10°, 500 mm - 2" king pin - Mechanical support legs at the front - 45-t rear supports --- Equipment - 2× toolboxes - Rotating beacon - LED lighting - Reverse work lights - Wheel chocks - Extensions 9×2 (up to +300 mm) - Stake box - Reflective strips on sides and rear --- Colour: RAL 3020 traffic red For further information, please feel free to contact us.

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements Rsdjrgzv Nepfx An Eet * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Stanje: novo, največja dovoljena obremenitev: 50.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment specification. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. length 3,700 mm, with rear bevel of approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with sockets Rodpfotx Nwnsx An Ejt * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * 1 pair of detachable ALU side walls, approx. 400 mm high, anodized finish * 1 detachable ALU rear wall, approx. 400 mm high, anodized finish * Over the gooseneck, approx. 40 mm thick hardwood flooring, over the king pin with checker plate covering * 2-inch king pin * Mount at the rear of the gooseneck for ALU drive-on ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. length 8,800 mm, with rear bevel approx. 500 mm x 10° * Recess in platform and rear bevel for accommodating an excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st axle self-steering, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reversing lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg * Platform with continuous and between-axles interrupted 50 mm thick hardwood flooring (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanized side extensions by approx. 230 mm each side (without wooden planks) * Wheel wells with square climbing strips, approx. 15 x 15 mm in front of the axles, continuous opening up to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel wells with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with single-track monitoring of the axles, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. length 4,350 mm and width approx. 900 mm * Hydraulically folding ramp tips * Ramps hydraulically adjustable individually by approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber surface approx. 25 mm and steel surface approx. 5 mm as additional

Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full specifications available upon request. * Gooseneck, approx. 4,100 mm long with central beam * Platform deck, extendable twice, approx. 9,400 mm in length * BPW axles and suspension * All axles hydro-mechanically forced steered * Technical axle load: 12,000 kg * Air suspension with lifting and lowering valve * Tires: 235/75 R 17.5 3PMSF dual mounted * WABCO brake system, EBS-E * 3 kW electro-hydraulic power unit for hydraulic operations, without installation of supply connections at the tractor unit Rjdpewvzg Rjfx An Ejt * 4 pairs of stake pockets recessed into the outer frame of the gooseneck, for insertable stakes approx. 100 x 50 mm * 2-inch king pin * 8 pairs of stake pockets recessed into the outer frame of the platform deck, for insertable stakes approx. 100 x 50 mm * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the deck on the left in the direction of travel * Remote steering from the front and rear via cable remote control with push buttons; with single-track axle monitoring; no installation in the tractor unit * 2 axle load gauges mounted on the left side * Steel front wall, approx. 1,600 mm high * 3 transverse stake pocket strips in the platform deck, for insertable stakes approx. 100 x 50 mm * 1 transverse stake pocket strip in the gooseneck deck, for insertable stakes approx. 100 x 50 mm * 1 additional lockable INOX toolbox under the platform deck * WADER container pockets in the platform deck for transporting: 2x 20' containers or 1x 40' container * Central lubrication system with 2 pumps, brand BEKAMAX * Complete HRM metallization (High Resistance Metallisation)

Stanje: novo, največja dovoljena obremenitev: 16.000 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2024, * KA-TA-RT 21.0 ML: * Without ABS / EBS, approved for 40 km/h * Spring-loaded parking brake, drum brakes * Gigant axles * Tandem equalising unit with 100 mm wide parabolic springs * Support winch at the front * Mechanical drop-down supports at the rear * Fixed welded drawbar with low-maintenance ball coupling for K80 ball head coupling (adjustable by +77 mm / 33 mm via the head plate) with elevated bracket for connection lines * 12 V 7 + 4 pin power supply * LED lighting system 12 / 24 V with protective grille * 2 LED work lights at the rear, switchable from the towing vehicle without additional installations on the tractor unit * Side marker lamps with indicator function * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Chassis made of high-tensile steel * Steel platform body, 3-way tipper with M-Strong side boards (fixed front wall, continuous side walls – without central stanchions – swinging via manual central locking as well as mechanically folding down with sideboard spring assist) * Hydraulic tailgate, 500 mm high, acts as a hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor * 1 x 7 t anchor point in each corner and 4 x 3 t lashing rings recessed and foldable on each side * Galvanised two-step access in front of the front wall (left side) * 1 pair of aluminium loading ramps (10 t / pair for axle spacing over 2,500 mm) 3,570 x 410 x 120 mm, suitable for rubber-tyred and tracked vehicles * 2 recessed ramp compartments at the rear of the chassis, cargo securing according to EN 12642 XL * --Coupling height loaded approx. 530 mm * Unloaded approx. 590 mm -- * Bodywork finished in RAL 9010 pure white * Chassis, drawbar, rear drop supports, underrun protection galvanised * Axles, air tanks, front support winch Rjdpfsr Dpzujx An Ejt * K80 coupling painted in black tone * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex-works Egestorf

Stanje: novo, največja dovoljena obremenitev: 16.000 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2024, * KA-TA-RT 21.0 ML: * Without ABS / EBS, approved for 40 km/h * Spring-loaded parking brake, drum brakes * Gigant axles * Tandem compensating aggregate with 100 mm wide parabolic springs * Support windlass at the front * Mechanical drop-down supports at the rear Redpfx Anor Dpz Hs Eet * Fixed welded drawbar with low-maintenance K80 ball coupling (offset by +77 mm / 33 mm adjustable via head plate) with elevated gantry for connection lines * 12 V 7 + 4 pole electrical wiring * LED lighting system 12 / 24 V with protective grille * 2 LED work lights at the rear, switchable from towing vehicle without vehicle-side installation * Side marker lights with indicator control * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Chassis made of fine-grain steel * Steel Pal.- three-way tipper body with M-Strong side walls (fixed front wall, continuous side walls without central stanchions, swinging via manual central locking and mechanically foldable with side wall spring lifter * Hydraulic tailgate, 500 mm high, acts as a hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor * In each corner 1 x 7 t, and on each side 4 x 3 t recessed and foldable lashing rings * Hot-dip galvanized two-step access ladder in front of the front wall (left side) * 1 pair of aluminum ramps (10 t/pair with axle distance over 2,500 mm) 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles * 2 rear-integrated storage compartments for aluminum ramps in the chassis; load securing according to EN 12642 XL * --Coupling height loaded approx. 530 mm * unloaded approx. 590 mm-- * Body paint finish in RAL 9010 pure white * Chassis, drawbar, rear drop supports, underrun protection are hot-dip galvanized * Axles, air tanks, front support windlass * K80 coupling painted in a shade of black * New vehicle with manufacturer warranty * Errors and prior sale reserved * Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 27.400 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2003, naslednji pregled (TÜV): 11/2026, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.000 mm, prostornina tovornega prostora: 33 m³, Oprema: ABS, Podrobnosti o žerjavu ? Kennis 16.000 valjčni žerjav ? UVV do: 11/2026 ? 3,50 m = 4,50 t ? 4,70 m = 3,35 t ? 5,90 m = 2,55 t ? 7,10 m = 2,10 t ? Kinshofer prijemalec za kamenje ? Tip: 332-V-1100 Podrobnosti o vozilu ? 2. in 3. os vodeni prek vrtljivega venca ? Kolutne zavore ? ABS Rjdpfox Ia E Nox An Eet ? Pnevmatsko dviganje osi ? 2 x zaboj za orodje ? Podporne noge ? SAF osi Vse navedeno brez garancije / Vmesna prodaja pridržana.

Stanje: rabljeno, prevoženi kilometri: 357.705 km, moč: 294 kW (399,73 KM), prva registracija: 12/2012, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 12/2026, barva: oranžna, vrsta prenosa: mehanski, emisijski razred: Euro 5, Leto izdelave: 2012, Oprema: ABS, klimatska naprava, navigacijski sistem, Odlično stanje z vodno pršilno šobo Rjdpfx Ajywqi Rjn Est

Stanje: novo, lastna masa: 9.150 kg, največja dovoljena obremenitev: 30.850 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.100 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, ABS, zračno vzmetenje z dvigom in spustom, tehtnice za obremenitev osi, skupna dolžina nakladalne površine cca: 9.100 mm, globoko ležišče cca: 6.900 mm dolgo, nakladalna višina obremenjena cca 890 mm, 24 x pritrdilnih ušes po 10 t, 12 x žepov za stebričke v zunanjem okviru, plezalna letev na zunanji strani ramp in zadnjega naklona, nakladalne rampe (pribl. 3.100 x 760 mm), rampe bočno nastavljive, lesena tla debeline 68 mm, zaboji z pokrovom za pritrdilne verige ali napenjalne trakove, konturirana označitev po predpisih, opozorilna luč, parkirna zavora s shranjevalnim vzmetjo, vključuje prikazovalnike obremenitve osi, vozilo vroče pocinkano s potopno kopeljo, doplačilo za: hidravlični premik ramp = cena: 1.000 €, -- Možne tiskarske napake, spremembe in napake pridržane, slike so simbolične --, Več podatkov na: !, Več podrobnosti na: ! Rodoy Ifitjpfx An Eot

Stanje: novo, lastna masa: 9.150 kg, največja dovoljena obremenitev: 30.850 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.100 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, ABS, zračno vzmetenje z dvigovanjem in spuščanjem, tehtnice za obremenitev osi, skupna dolžina tovorne površine ca: 9.100 mm, nizko ležišče ca: 6.900 mm dolgo, nakladalna višina obtežena ca. 890 mm, 24 x pritrdilnih ušes po 10 t, 12 x žepov za stebričke v zunanjem okvirju, nakladalne rampe (ca. 3.100 x 760 mm), stopničasta letev na zunanji strani ramp in zadnjega naklona, rampe bočno nastavljive, lesena tla debeline 68 mm, skladiščna škatla z pokrovom za pritrdilne verige ali pasove, označba obrisa po predpisih, rotacijska opozorilna luč, zavorni sistem s federnim pomnilnikom, vklj. z indikatorji obremenitev osi, vozilo vroče pocinkano v potopni kopeli, doplačilo za: hidravlično pomikanje ramp = cena: 1.000 €, -- napake v tisku, pomote in spremembe pridržane, slike so simbolične --, Več podatkov na: !, More Details: ! Rsdpfx Ansy Ifg Es Ejt

Stanje: novo, lastna masa: 9.150 kg, največja dovoljena obremenitev: 30.850 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.100 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, ABS, zračno vzmetenje z dvigom in spustom, tehtnice za obremenitev osi, skupna dolžina nakladalne površine pribl. 9.100 mm, nizka postelja pribl. 6.900 mm dolžine, nakladalna višina pod obremenitvijo pribl. 890 mm, 24 x pritrdilna ušesa po 10 t, 12 x žepov za stebričke v zunanjem okviru, nakladalne rampe (pribl. 3.100 x 760 mm), protidrsna letev na zunanji strani ramp in zadnjem nagibu, rampe bočno nastavljive, lesen pod 68 mm debeline, škatla z pokrovom za verige ali privezne pasove, obrisna označitev po predpisih, rotacijska luč, parkirna zavora s tlačno vzmetjo, vklj. z indikatorji obremenitve osi, vozilo vroče cinkano s potapljanjem, doplačilo za: hidravlično premikanje ramp = cena: 1.000 €, -- Pridržujemo si pravico do napak v tisku, sprememb in zamenjav, primer slike --, Več podatkov na: !, Več informacij na: ! Redpfx Anjy H A Sco Ejt

Stanje: novo, lastna masa: 9.150 kg, največja dovoljena obremenitev: 30.850 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.100 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, ABS, zračno vzmetenje z dvigom in spustom, tehtnice za obremenitev osi, skupna dolžina nakladalne površine pribl. 9.100 mm, nizka postelja pribl. 6.900 mm dolžine, nakladalna višina pod obremenitvijo pribl. 890 mm, 24 x pritrdilna ušesa po 10 t, 12 x žepov za stebričke v zunanjem okviru, nakladalne rampe (pribl. 3.100 x 760 mm), protidrsna letev na zunanji strani ramp in zadnjem nagibu, rampe bočno nastavljive, lesen pod 68 mm debeline, škatla z pokrovom za verige ali privezne pasove, obrisna označitev po predpisih, rotacijska luč, parkirna zavora s tlačno vzmetjo, vklj. z indikatorji obremenitve osi, vozilo vroče cinkano s potapljanjem, doplačilo za: hidravlično premikanje ramp = cena: 1.000 €, -- Pridržujemo si pravico do napak v tisku, sprememb in zamenjav, primer slike --, Več podatkov na: !, Več informacij na: ! Redpfx Aney H A Nuo Ejt

Stanje: novo, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.350 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Flatbed, ABS, air suspension with lift/lower function, axle load scales, total platform length approx. 9,350 mm, 32 lashing rings, 10 stake pockets in the outer frame, loading ramps (approx. 3,100 x 760 mm), cleat strip on outside of ramps and rear slope, ramps adjustable sideways, 68 mm thick wooden floor, storage box with lid for lashing chains or tie-down straps, mandatory contour marking, rotating beacon, spring-loaded parking brake, incl. axle load indicators, chassis fully hot-dip galvanized, Surcharge for: hydraulic ramp adjustment, Price: €1,000. -- Subject to typing errors, mistakes, and changes. Sample images. For more data see: !, More Details: ! Rodpfxsy Hfv Rj An Ejt

Stanje: novo, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.100 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, ABS, Zračno vzmetenje z možnostjo dviga in spusta, Tehtnice za obremenitev osi, Skupna dolžina nakladalne površine pribl.: 9.100 mm, Globoka postelja pribl.: 6.900 mm dolga, Višina nakladanja pod obremenitvijo pribl. 890 mm, 24 x pritrdilna ušesa po 10 t, 12 x žepov za kolike v zunanjem okviru, Plezalna letvica na zunanji strani ramp in zadnje poševnine, Dvodelne nakladalne rampe (pribl. 4.300 x 750 mm), Nakladalne rampe nastavljive vstran, Lesena tla debeline 68 mm, Skladiščna škatla s pokrovom za verige ali pritrdilne pasove, Označevanje obrisa po predpisih, Opozorilna rotacijska luč, Pomožna parkirna zavora z vzmetjo, Vklj. prikaz obremenitve osi, Vozilo pocinkano v potopni kopeli, Doplačilo za: Hidravlični premik ramp = cena: 1.000 €, -- Možne tiskarske napake, spremembe in napake so pridržane, vzorčne slike --, Več podatkov na: !, Več podrobnosti na: ! Rodpfxjy E H Sqs An Est

Stanje: novo, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.350 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Flatbed, ABS, air suspension with lift/lower function, axle load scales, total platform length approx. 9,350 mm, 32 lashing rings, 10 stake pockets in the outer frame, loading ramps (approx. 3,100 x 760 mm), cleat strip on outside of ramps and rear slope, ramps adjustable sideways, 68 mm thick wooden floor, storage box with lid for lashing chains or tie-down straps, mandatory contour marking, rotating beacon, spring-loaded parking brake, incl. axle load indicators, chassis fully hot-dip galvanized, Surcharge for: hydraulic ramp adjustment, Price: €1,000. -- Subject to typing errors, mistakes, and changes. Sample images. For more data see: !, More Details: ! Redpfx Aoy Ethfsn Eot