Eduard Az 4020 Allzwecktransporter Mit Rampen nakup rabljenega (8.292)

Stanje: novo, prevoženi kilometri: 100 km, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 9.000 mm, širina tovornega prostora: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, klimatska naprava, navigacijski sistem, parkirni grelec, 4-axle Volvo machinery transporter / aerial work platform transporter • FH 500 8x2R • Trailing axle, electro-hydraulically steered, single tires • Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle • FH long-distance safety cab • Cab parking heater, 2 kW • 33 l refrigerator with freezer compartment, under bunk • Air suspension on front axle(s) • Gearbox / I-Shift operation via driver seat control unit • I-Shift drive modes: Standard, Performance, and Economy • I-See with map-based topography and traffic information • Eco cruise control (cruise control), including brake cruise control • Manual shifting possible in automatic mode (including kickdown) • Adaptive traction control • Adaptive cruise control (ACC) with collision warning and emergency braking function • Lane departure warning system • Side collision avoidance and turning assistant (both sides) • Driver alert system, warns of drowsiness • VEB Volvo Engine Brake • etc. WIESE superstructure for aerial platform and construction machinery transport with hydraulic loading ramps With 2 pairs of wheel recesses including covers Superstructure dimensions: Itodpfx Agew Itmrj Eok - Approx. 9,050 mm usable length - External width 2,550 mm - Loading height (top of floor) approx. 1,050 mm unloaded - Robust, weight-optimized steel welded construction, high-volume design - Short crossmember spacing for high point loads - Rear end beveled for low approach angle - Outside frame profile 90° - Front bulkhead reinforced - Storage box inside lower front bulkhead - Grating floor - Designed for 5,000 daN wheel load - Steel storage boxes above the axles and outer frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed in outer frame - Longitudinal beams each with Multi-X contour over whole length with multiple lashing points 2.5 t - 4 lashing eyes 8 t recessed at rear (left/right/center/center) - 4 lashing eyes 8 t recessed in front bulkhead (left/right/center/center) - Outside frame profile 90° Loading ramps: Type: WFB 20 S-2 Capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramp design as 2 individual / telescopic ramps, both ramps are laterally adjustable - Ramp can be used as a loading ramp and as a drive-over ramp for warehouse technology (telescopic section remains closed), the fixed ramp part is laid onto the dock ramp - Sturdy tension bar as transport lock (alternative with belt tensioning) - 2 hydraulic rear supports with plates, with audible warning and control light in cab - Ramp and supports operated via electro-hydraulics - Remote control operation and emergency control at control block - Control block installed in stainless steel toolbox at frame side - Superwinch 8.2 t with approx. 20 m steel cable - Access with handholds left and right for loading area walk-on - 5 stainless steel drawer-type toolboxes, including lighting as optional extra - Side paneling as per sample images (green vehicle), available as option for extra cost - Superstructure coating KTL - Ball head trailer coupling at rear, 3.3 t - 4 LED work lights - 2 LED rear lights mounted at top of front bulkhead - 4 external LED work lights on frame for area lighting - 2 LED work lights at rear - 1 removable rotating beacon at rear Stock vehicle comes with cab in white and superstructure in nova grey (external frame painted in RAL color of your choice upon request)

Stanje: novo, prevoženi kilometri: 100 km, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 9.000 mm, širina tovornega prostora: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, klimatska naprava, navigacijski sistem, parkirni grelec, 4-axle Volvo machine transporter / work platform transporter • FH 500 8x2R • Trailing axle, electro-hydraulically steered, single tires • Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle • FH long-distance safety cab • Cab auxiliary heater, 2 kW • 33 l coolbox with freezer compartment under bunk • Air suspension on the front axle(s) • Transmission/I-Shift operated via control unit on driver's seat • I-Shift drive modes: Standard, Performance, and Economy • I-See with map-based topographical and traffic data • Eco Cruise Control (cruise control) including brake cruise control • Manual gear selection possible in automatic mode (incl. kickdown) • Adaptive Traction Control • Adaptive Cruise Control (ACC) with collision warning & emergency braking • Lane Keeping Assist • Side collision avoidance & turn assist (both sides) • Driver alertness warning system for fatigue • VEB Volvo Engine Brake • etc. WIESE bodywork for aerial platform and construction machinery transport with hydraulic loading ramps with 2 pairs of wheel recesses incl. wheel recess covers Body dimensions: - Usable length approx. 9,050 mm - External width 2,550 mm - Platform height (top of floor) approx. 1,050 mm unladen - Robust, weight-optimized steel welded construction, box-type design - Short crossmember spacing for high point loads - Rear end beveled for low approach angle - External frame profile 90° - Bulkhead in reinforced design - Internal storage box at bottom in front of bulkhead - Grating floor - Designed for 5,000 daN axle load - Above axles: steel toolboxes & outer frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 tonnes, flush-mounted in outer frame - Longitudinals each with Multi-X contour along the entire length, many lashing points 2.5 tonnes - 4 lashing eyes 8t at the rear, recessed (left/right/center/center) - 4 lashing eyes 8t at front bulkhead, recessed (left/right/center/center) - Outer frame profile 90° Loading ramps: Type: WFB 20 S-2 Capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramp design as 2 individual/split ramps, both ramps laterally adjustable - Ramp can be used as a loading ramp or as a drive-over ramp for warehouse technology (sliding part remains closed), fixed ramp section placed on hall ramp - Heavy-duty locking bar for transport security (optional with strap lock) - 2 hydraulic rear supports with plates incl. warning buzzer & indicator light in cab - Ramps and supports operated by electro-hydraulics - Control via radio remote and emergency control at control block - Control block mounted in stainless steel toolbox at side of frame - Superwinch, 8.2 t, with approx. 20 m steel cable - Access steps with handrails left and right for cargo area access - 5 stainless steel drawer-type toolboxes, incl. lighting (option, at extra cost) - Side fairings as per sample images (green vehicle), option at extra cost - Body coating KTL - Rear tow hitch (ball), 3.3t - 4 LED work spotlights - 2 LED rear lights mounted high on bulkhead - 4 LED external work lights on frame for area illumination - 2 LED work lights at rear Itsdpsw Itmljfx Ag Ejk - 1 removable rotating beacon at rear The stock vehicle is supplied with cab in white and body in nova grey (outer frame painted to RAL color by request).

Stanje: novo, največja dovoljena obremenitev: 26.500 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.450 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, WIESE 3-axle low-loader with ramps and wheel recesses ? NEW Availability approx. 4 months from order ---- Vehicle data Manufacturer: WIESE * Type: WSA 3-36 TL * Year of manufacture: 2025 * Axles: 3 * Gross weight: 39,000 kg * Fifth-wheel load: 12,000 kg * Aggregate axle load: 27,000 kg * Unladen weight: approx. 9,500 kg * Tyres: 235/70 R17.5 * Brakes: WABCO EBS with RSS ---- Dimensions * Load bed length: 13,450 mm * Low-bed length: approx. 9,550 mm * Fifth-wheel section: approx. 3,640 mm * External width: 2,550 mm * Bed height low-bed: approx. 920 mm * Fifth-wheel height: approx. 1,250 mm ---- Equipment * 3 x SAF axles (9 t) with air suspension * 1st axle with lift function * 3rd axle with trailing steering axle (lockable) * Electronic air suspension E-TASC * WABCO EBS brake system with Roll Stability Support * Tyre pressure monitoring system for 12 tyres * Full LED lighting * 4 x LED work lights * 15-pin + 2 x 7-pin sockets ---- Bodywork * Sturdy steel frame * 28 mm hardwood floor / Omega floor * 13 pairs of lashing rings 8,000 kg * Additional lashing points 5,000 daN Itjdpfeyuq Igex Ag Esk * 2 pairs of wheel recesses * Digger arm recess * Aluminium plug-in side boards on the raised deck * Toolbox at the front ---- Ramps * 2 x aluminium drive-on ramps * Dimensions: approx. 2,800 x 600 mm * Load capacity: 27,460 kg * Spring lifting system * Sideways adjustable ---- Miscellaneous * Warning boards for overwidth up to 3 m * Contour marking in accordance with ECE-R48 * Technical documentation and TÜV certificate For further information, we are happy to assist you.

Stanje: novo, prevoženi kilometri: 100 km, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 9.000 mm, širina tovornega prostora: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, klimatska naprava, navigacijski sistem, parkirni grelec, 4-axle Volvo machine transporter / work platform transporter ▪ FH 500 8x2R ▪ Trailing axle, electro-hydraulically steered, single tires ▪ Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle ▪ High-roof long-distance safety cab FH ▪ Cab auxiliary heater, 2 kW Itedpfew Itl Uox Ag Eok ▪ 33 l cool box with freezer compartment, under bunk ▪ Air suspension on front axle(s) ▪ Transmission / I-Shift control via operator panel on driver's seat ▪ I-Shift driving modes: Standard, Performance, and Economy ▪ I-See with map-based topography and traffic information ▪ Eco cruise control (cruise control), including brake cruise control ▪ Manual shifting possible in automatic mode (incl. kickdown), adaptive traction control ▪ Adaptive cruise control (ACC) with collision warning and emergency braking function ▪ Lane keeping assist ▪ Side collision avoidance and turn assist (both sides) ▪ Driver alert system for drowsiness warnings * VEB Volvo Engine Brake * etc. WIESE body for work platform and construction machinery transport with hydraulic loading ramps with 2 pairs of wheel recesses including covers Body dimensions: - Length approx. 9,050 mm usable length - External width 2,550 mm - Loading height on upper edge floor approx. 1,050 mm unladen - Robust, weight-optimized steel welded structure, box-type construction - Short crossmember spacings for high point loads - Rear end beveled for low approach angle - External frame profile 90° - Bulkhead in reinforced version - Internal bottom tool box in front of bulkhead - Grating floor - Suitable for wheel loads of up to 5,000 daN - Above the axles: steel plate tool boxes and outer frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed into external frame - Longitudinal members with Multi-X profile along the entire length with numerous lashing points, 2.5 t - 4 lashing eyes 8 t recessed at the rear (left/right/center/center) - 4 lashing eyes 8 t recessed at the front bulkhead (left/right/center/center) - External frame profile 90° Ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramp design: 2 individual/stretch ramps, both laterally adjustable - Ramps can be used as drive-up ramps or bridging ramps for warehouse technology (stretch section remains closed), fixed ramp section placed on dock ramp - Sturdy tension bar as transport safety (alternatively with strap tensioning) - 2 hydraulic rear supports with footplates, warning buzzer and indicator light in cab - Ramp and support operation via electro-hydraulic system - Control by radio remote or manual emergency controls on switch block - Switch block mounted in stainless steel toolbox on the frame side - Superwinch 8.2 t with approx. 20 m steel cable - Access steps with grab rail on right and left for walking onto loading area - 5 stainless steel drawer-type tool boxes, with optional lighting available at extra cost - Side skirting as shown in sample images (green vehicle), available as an option at extra cost - KTL coating for the superstructure - Spherical trailer hitch at rear, 3.3 t - 4 LED work lights - 2 LED reversing lights mounted high on bulkhead - 4 LED work lights externally mounted on the frame for area illumination - 2 LED work lights at the rear - 1 removable rotating beacon at the rear Stock vehicle is supplied with cab color in white and body in nova grey (exterior frame painted in RAL color of y

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 682 kg, največja dovoljena obremenitev: 2.318 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, največja hitrost: 100 km/h, Leto izdelave: 2026, ✅✅ IMMEDIATE DELIVERY ✅✅ INVOICE WITH VAT ✅✅ Scope of delivery: 1x Car transporter with winch, tilting function, and loading ramps, 3t Description: With an extremely low loading angle of 6 degrees, our car transporter is suitable for almost all sports cars and lowered vehicles. Car transporter trailer with winch, tilting function, and loading ramps. Thanks to the pre-installed 12m winch, you can easily load and transport vehicles that are not roadworthy. The tilting function, combined with additional loading ramps, allows for a low loading angle, making it easier to load vehicles with low ground clearance. The ramps are adjustable and safely stowed underneath the load area with a secure lock. Technical data: - Tiltable - Braked - Automatic jockey wheel - Plastic wheel chocks with holder - With winch - Plug holder - Welded frame Winch: Length: approx. 12 meters Pulling force: approx. 1135 kg / 2500 lb Rail dimensions: Width: approx. 30 cm Length: approx. 120 cm Gross weight: 3000kg Itjdpfjxny R Nsx Ag Esk Plug type: 13-pin Unladen weight: 682kg Payload: 2318kg Total length: 5996mm Total width: 2150mm Total height: 750mm Loading area length: 4490mm Loading area width: 2105mm Jockey wheel: Yes Brake: Yes Wheel chocks: Yes Shock absorbers: No (Available at extra cost: 199,- Euro for 100km/h upgrade) ✅ Immediately available ✅ ✅ All prices incl. VAT ✅ Scheduled delivery possible – please ask us +++ Pickup or inspection +++ ✅ Mon – Fri: 9 am - 7 pm ✅ Sat: 9 am - 2 pm

Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 Profi ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment ----Lighting / Electrics: * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable rear LED beacon * 2 LED reversing lights (activated via reverse gear) Itsdel Tlhrjpfx Ag Eek ----General equipment: * Manometer - pressure gauge for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign sets front and rear * VA plastic quarter mudguards with spray protection * HA straight galvanized steel skirts with spray protection * Reflective contour tape on sides and rear * Tool box, galvanized steel sheet, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high ----Low loader platform: * Forepart in front of the turntable platform, approx. 490 mm long with 45° corners * ROBOT-welded anti-slip surface on the steel plate of the turntable platform * Hardwood floor on the running surfaces of the low loader platform ----Load securing (La-Si package comprising): * In front of the front wall support, 1 x 13.4 t UVV lashing point each left & right * 4 lateral holes each in the turntable platform with 2 t lashing capacity each * 1 pair of lashing points (13.4 t) hanging at the rear left & right in front of the rear support * 4 pairs of UVV lashing rings (10 t) on each side, swiveling and lowering, loadable in all directions and recessed in the outer frame * 3 pockets for stanchions per side, with simultaneous 2 t lashing facility ----Widening package: * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (not in the rear taper) * Plank holder for extensions under the chassis on the left, longitudinally ----Excavator arm rest: * Excavator arm rest above HA up to the end support, approx. 2,100 mm long and approx. 190 mm deep * 2 pairs of 6.4 t lashing points each side in the excavator arm rest ----Ramps: * Hydraulic one-piece approach ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer planks of ramps made from hardwood * Steel structure prepped for 6-section control valve ----Loading height: * Loading edge unladen approx. 950 mm +/- 20 mm ----Tires: * 235/75 R 17.5 tires ----Paintwork: * Chassis, turntable, folding outriggers, mechanical supports, and approach ramps hot-dip galvanized * -- Axles, air tanks, drawbar finished in a shade of black -- ----Information: * Vehicle has a day registration in 07/2024 due to missing tire pressure monitoring system, and has not been loaded/used * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * KA-TA-RT 18.0: ----Brake: * EBS (Electronic Braking System) * Emergency release for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering device, including Ride-Through-Release (RtR) valve and manual lowering function for loading ----Drawbar / Flanged Drawbar Eye: * Drawbar with positive-locking height adjustment * 50 mm flanged drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V fitted in underrun protection ----General Attachments: * Support winch at front * Fold-away rear support legs on the outside * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on right side * Plastic quarter mudguards ----Tipping Body: * Steel pallet – 3-way tipper body made of high-tensile fine grain steel with high M-Strong side panels and reinforced 180 bar tipping cylinder * Fixed front wall made of smooth sheet steel * Hardwood strip for excavator bucket screwed onto front wall * Continuous side panels – fold-down without center pillar, with sideboard spring-assist lifters and swinging function via manual central locking * Bolt-on rear stanchions * Combination steel swing doors at rear, 2-leaf, asymmetrically split, able to swing open 270° and lockable (not foldable), including additional swinging frame for automatic rear door opening when tipping; locking by galvanized rotating bar lock and central locking, deactivation function for automatic rear door opening when tipping backwards with opened swing doors * 4 mm steel floor plate * Two-step access on the left front * Rear ramp track for loading ramps ----Load Securing: * One 7 t lashing ring in each corner * Four 3 t lashing eyes recessed in the outer frame on each side ----Loading Ramps: * Recessed ramp compartment at rear of chassis * 1 pair aluminium loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipping platform, underrun protection, and rear supports hot-dip galvanized * Sideboards painted in any desired RAL colour (excluding special or metallic paints), can be changed up to approx. 6 weeks before completion * Axles, air tanks, flanged drawbar eye, and front support winch painted in black ----Info: * --Load securing certificate according to EN 12642 XL? * Errors and intermediate sale reserved Itjdpfovin Ucsx Ag Eek ----Delivery Time: * Available from approx. CW 45 / 2026

Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 Profi ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 4 x 11 tonne Gigant axles Isdpsl Tnu Aefx Ag Ejtk ----Suspension: * Air suspension with lifting and lowering system and RtR valve ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment ----Lighting / Electrical: * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * LED rotating beacon (removable) at the rear * 2 LED reversing lights (activated via reverse gear) ----General Attachments: * Manometer (pressure gauge) for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning boards, front and rear * Front axle plastic mudguards with spray protection * Rear axle straight galvanized steel side skirts with spray protection * Reflective contour tape on the sides and rear * Tool box, black powder-coated galvanized steel, approx. 1,000 mm wide, 600 mm deep, 300 mm high ----Low Loader Platform: * Front extension in front of the turntable platform, approx. 490 mm long with 45° corners * ROBOT-WELDED anti-slip coating on the steel plate of the turntable platform * Hardwood flooring on the running areas of the low-bed platform ----Load Securing (La-Si package consists of): * 1 x 13.4 t UVV lashing ring left & right in front of the headboard carrier * 4 fixing holes each side in the turntable platform, each with 2 t lashing capacity * 1 pair of lashing rings (13.4 t), suspended at the rear left & right in front of the rear carrier * 4 pairs of UVV lashing rings (10 t) per side, pivotable and lowerable, loadable in all directions and recessed into the external frame * 3 stake pockets per side, each offering 2 t lashing capability simultaneously ----Widening Package: * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (not in the rear slope) * Beam bracket for widenings under the chassis on the left, longitudinally mounted ----Excavator Arm Rest: * Excavator arm rest above the rear axle up to the end cross member, approx. 2,100 mm long and approx. 190 mm deep * 2 pairs of 6.4 t lashing rings per side in the excavator arm rest ----Ramps: * Hydraulically operated one-piece drive-on ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer planks of the ramps made from hardwood * Steel construction prepared for 6-way control valve ----Loading Height: * Loading edge unladen approx. 950 mm +/- 20 mm ----Tyres: * Tyres 235/75 R 17.5 ----Coating/Paintwork: * Chassis, turntable, folding outriggers, mechanical supports, and drive-on ramps hot-dip galvanized * --Axles, air tanks, drawbar painted black-- ----Infos: * Vehicle has a daily registration as of 07/2024, due to the missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * KA-TA-RT 18.0: ----Braking System: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, including RtR valve and manual lowering for loading operations ----Drawbar / Flange Drawbar Eye: * Drawbar with positive-locking height adjustment * 50 mm flange drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V integrated in underrun protection Isdpfx Asvin T Ssg Estk ----General Attachments: * Landing gear at the front * Fold-out support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Plastic quarter mudguards ----Tipper Body: * Steel 3-way tipper body made of fine-grain steel with high M-Strong side walls and reinforced 180 bar tipping cylinder * Fixed front wall, smooth sheet steel * Hardwood pad for excavator bucket bolted to front wall * Continuous, folding drop sides without central stanchion, with sideboard spring assist and manual central locking system * Screwed-in rear stanchions * Combination steel swing doors, asymmetrical 2-leaf rear wall, can be swung and locked at 270°, not foldable, with additional swinging frame for automatic rear wall opening during tipping, locking via galvanized rotary bar lock and central locking system, deactivation function for automatic rear wall opening when tipping reverse with open swing doors * 4 mm steel floor plate * Two-step entry left front * Rear mounting rail for loading ramps ----Load Securing: * 1 x 7 t lashing ring in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Loading Ramps: * Integrally mounted ramp storage at the rear of the chassis * 1 pair of aluminum loading ramps (10 t / pair) approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipping platform, underrun protection, rear folding supports hot-dip galvanized * Sideboard paintwork in RAL custom color (with exceptions for special or metallic paintwork); can be changed up to approx. 6 weeks prior to delivery * Axles, air tanks, flange drawbar eye, front landing gear painted in black ----Information: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. CW 45 / 2026

Stanje: rabljeno, največja dovoljena obremenitev: 38.048 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2020, dolžina tovornega prostora: 13.190 mm, širina tovornega prostora: 3.150 mm, višina nakladalnega prostora: 890 mm, skupna širina: 2.550 mm, skupna višina: 3.550 mm, Leto izdelave: 2020, Oprema: ABS, Kaessbohrer LB3E polpriklopnik nizke izvedbe s hidravličnimi rampami Prva registracija BPW Eco Plus osi Dvižna os Bobnaste zavore z ABS in EBS Zračno vzmetenje Pnevmatike: 245/70 R17,5 40/45% Skupna masa: 48.000 kg, Lastna masa: 9.952 kg, Nosilnost: 38.048 kg. Dolžina labodjega vratu: 3,95 m Ijdoy Eupwspfx Ag Ejtk Dolžina nizke ploščadi: 9,24 m Širina: 2,55 m + 2x30 cm Višina nakladalne površine: 89 cm Hidravlične rampe s stranskim pomikom Zadnje podporne noge Privezni obroči Žepi za kole Pridržujemo si pravico do napak/opisnih napak in vmesne prodaje.

Stanje: novo, največja dovoljena obremenitev: 8.840 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Overall length: 8,000 mm Loading length: 6,200 mm including rear bevel Additional information: plus delivery/preparation ex-stock location 26639 Wiesmoor €1,280.00 net Loading width: 2,480 mm Chassis: central axle trailer Fine-grain steel welded construction Slightly sloped outer frame, new design with "Load-Lock profile" for securing lashing straps Pair of lashing eyes on the outer edge of flooring, each rated 5t: 1 x in the front corners, 1 x in front of and 1 x in the rear bevel 6 pairs of lashing eyes on the outer edge of floor/frame, each rated 5t Gear support leg at front Foldable rear support Wheel chocks with holder Aluminium side underrun protection Galvanised steel rear underrun protection Full-width rear mud flap (not in conjunction with forklift mounting) Quarter shell mudguards 1 plastic toolbox, W=600 / H=425 / D=460 mm, lockable Drawbar for central axle trailer Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles & Suspension: GFA or BPW axles as per manufacturer’s choice, with tapered roller bearings and S-cam brakes "Axle/chassis laser alignment" reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical load compensation (rocker suspension) Brake System: 2-line compressed air brake system Colour-coded line routing for easy servicing Manual spindle parking brake 2 confusion-proof coupling heads at front, with connecting lines to tractor unit 24 volt ABS and ALB, ABS plug at the front with connecting cable Note: The trailer may only be towed by vehicles capable of ensuring ABS functionality! Wheels and Tyres: 235/75 R17.5, make as per manufacturer’s choice Steel rims, factory silver Electrics: 24 volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at front, LED 2 white/red lane marker lights at rear 2 x 7-pin confusion-proof connectors at front, with connection cable Floor: Steel/chequer plate flooring for high point load capacity Note: Slight floor waviness due to welding distortion possible! Platform length approx. 6,200 mm Rear bevel approx. 900 mm Front wall / front corner posts: 25 mm aluminium hollow section, 400 mm high Side walls: 25 mm aluminium hollow section, 400 mm high, foldable and removable Centre posts: Without centre posts Rear wall / rear corner posts: 1 pair of steel posts mounted to the frame with provision for securing loading ramps, entrance width approx. 2,430 mm Loading ramps: Steel ramps 2,300 mm long, 510 mm wide, laterally adjustable With carrying handle on ramps Wooden covering (front end area in steel/chequer plate) With gas strut for one-man operation Operating information: The specified gross weight is technically achievable; however, depending on the type of load, the permitted gross weight may not be reached due to permissible axle/support/kingpin loads. (Poor driving and trailing behaviour due to incorrect load distribution possible) Registration country / plates: Germany With Dekra inspection and certification (according to §13 EG-FGV) 24/7 service hotline Prepared for single-line registration plate holder Contour marking with reflective strips in accordance with ECE R 048, white on sides and red at rear Paintwork: Frame DB 7350 Novagrau Front wall aluminium Side walls anodised aluminium Itedjyl E Dqspfx Ag Eek Loading ramps hot-dip galvanized

Stanje: novo, največja dovoljena obremenitev: 8.840 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New Fliegl tandem low-loader with ramps, model TPS 118 Chassis fully hot-dip galvanized – sidewalls aluminum Vehicle from current production – delivery time approx. two weeks Gross weight: 11,800 kg Empty weight: 2,960 kg Payload: 8,840 kg Total length: 8,000 mm Loading length: 6,200 mm incl. rear slope Width: 2,550 mm Loading height: 900 mm Further information plus pre-carriage / handling from storage location 26639 Wiesmoor €1,280.00 net Loading width: 2,480 mm Chassis: Central axle trailer Fine-grain steel welded construction Slightly sloping outer frame, new design with "Load-Lock profile" for lashing strap attachment 3 pairs of lashing rings on the exterior floor, each 5t 1x front corners, 1x in front and 1x in the rear slope at the back Pair of lashing rings on the exterior floor / outer frame, each 5t Support leg at front Foldable rear support 2 wheel chocks with holder Side impact protection aluminum Underrun protection galvanized steel Spray flaps at the rear across the full width (not in conjunction with forklift holder) Quarter-shell fenders 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Drawbar arrangement for central axle trailer Drawbar with certified 40 mm towing eye Height-adjustable drawbar via spindle, max adjustment 300 mm Axles + Suspension GFA axles with tapered roller bearings and S-cam brakes "Axle/chassis laser alignment" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load balancing (rocker equalizer) Brake system 2-line compressed air brake system Itodpev E Dqljfx Ag Eok Color-coded line layout for easier servicing Hand spindle parking brake 2 key-proof coupling heads at front, with connection lines to towing vehicle 24 volt ABS and ALB, ABS socket at front, with connecting cable Note: The trailer may only be towed by vehicles that ensure proper ABS functionality! Wheels and Tires 4 x 235/75 R17.5, brand at manufacturer’s discretion 4 steel rims, factory silver Electrics 24 volt, multi-chamber taillights, side yellow LED lighting 2 white position lights at front LED 2 white/red lane marker lights at rear 2 x 7-pin key-proof plugs at front, with connecting cable Floor Steel / checker plate floor for high point load capacity Note: Light floor warping due to welding distortion possible! Platform length: approx. 6,200 mm Rear slope approx. 900 mm Front wall / front corner stanchions 25 mm aluminum hollow profile, 400 mm high Sidewalls 25 mm aluminum hollow profile, 400 mm high, foldable and removable Central stanchions 1 pair of folding stanchions in sidewall height, foldable and removable Rear wall / rear corner stanchions 1 pair of steel stanchions bolted to frame with holder for ramp locking, entry width approx. 2,430 mm Loading ramps 2 steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with handgrip on ramps wood-covered (ramp tip with steel/checker plate) gas strut for single-operator handling Paintwork Frame hot-dip galvanized with passivation "15-year warranty against rust-through" Front wall RAL 9006 white aluminum Sidewall RAL 9006 white aluminum Loading ramps hot-dip galvanized Hire purchase offer: 48-month term, down payment only VAT, residual value 40%, monthly installment EUR 350.00

Stanje: novo, največja dovoljena obremenitev: 32.100 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, NOVO VOZILO Fliegl 3-osni polnizkopodni priklopnik z rampami Tip SDS 470 T Skupna masa 41.000 kg / 47.000 kg Lastna teža 8.900 kg Itedjk N Afljpfx Ag Ejk Nosilnost 32.100 kg / 38.100 kg Skupna dolžina 13.300 mm Nakladalna površina 9.200 mm Rampi 3.000 mm x 750 mm s hidravličnim upravljanjem Zračno vzmetenje z ventili za dviganje in spuščanje Izrez za roko bagra Velik komplet za pritrjevanje tovora Lesena tla 70 mm SAF osi, tretja os kot sledilno krmiljena os Ponudba leasinga: doba trajanja 48 mesecev, 40% preostala vrednost, predplačilo samo DDV. Mesečna rata EUR 999,00 (plačljivo samo neto)

Stanje: rabljeno, največja dovoljena obremenitev: 7.618 kg, skupna masa: 9.990 kg, konfiguracija osi: 2 osi, prva registracija: 11/2020, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 250 mm, skupna širina: 2.550 mm, skupna višina: 3.020 mm, Humbauer tandem prikolica z 2 osmi in rampami Tip: HS 105020 BS Nosilnost: 7618 kg Material: aluminij Zavora: boben Os: SMB 3x podporna točka 2x rampi (dolžina: 2,30 m in širina: 0,45 m) Dolžina: 5,00 m Širina: 2,00 m Višina: 0,25 m Z veseljem vam pomagamo tudi pri financiranju/leasingu z našimi partnerji. Itedpfx Aey Unvcog Ejk Vsi podatki so brez garancije. Pridržujemo si pravico do napak in vmesne prodaje.

Stanje: rabljeno, lastna masa: 1.100 kg, največja dovoljena obremenitev: 1.500 kg, skupna masa: 2.600 kg, prva registracija: 11/2016, dolžina tovornega prostora: 510 mm, širina tovornega prostora: 210 mm, višina nakladalnega prostora: 1.600 mm, Leto izdelave: 2016, The online pick-up market for your new or used trailer offers leading brand models ready to take away! - Over 850 new trailers in stock - Over 130 used trailers always available - Over 150 vehicle transporters − popular models with extensive accessories in stock Ijdpfxevwdmqo Ag Eetk Non-binding example: Used trailer in top condition The ideal bad-weather car transporter Flatbed with grey frame and tarpaulin Aerodynamically sloped for fuel-saving operation Internal loading dimensions approx. 510x210x160 cm Overall dimensions 660x220 cm, total height approx. 240 cm Lashing system: lashing brackets for car and machinery transport Ramp rails stowed rattle-free under the loading deck First registration: 1 previous owner / Registered 01/2016 Technical inspection (HU) valid Alloy wheels Tyres from 2016 (must be replaced for 100 km/h approval!) New technical inspection possible upon purchase Gross weight 2600 kg, unladen weight approx. 1100 kg Vehicle location: Rhineland, near Düsseldorf / Cologne Inspection is expressly desired but only possible by appointment. Available by arrangement! Sales & order hotline: Mon-Fri 08:00 - 12:30 & 14:00 - 18:00 Or order new trailers 24/7 via our trailer shop now Images and description in this advertisement are protected by copyright – logos and brands by trademark law. used ccha91 03/26 l5

Stanje: novo, lastna masa: 15.420 kg, največja dovoljena obremenitev: 61.080 kg, skupna masa: 76.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, velikost pnevmatike: 235/75/r17,5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Platform: Extendable loading platform with rear chamfer approx. 500 mm x 8° 8 pairs of flip-out lashing rings 1 pair of recessed lashing rings at the front of the loading area Cutouts in the outer frame for securing straps Approx. 48 mm thick hardwood flooring; checker plate above the axles Two-Part Steel Ramps: One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramps with hydraulically folding ramp sections, hydraulic lifting and hydraulic lateral movement. Max load per pair: 50,000kg. Landing Legs: • JOST landing legs (mechanical) with two-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axle with electromagnetically operated reverse lock, activated by reverse gear and manually Tyres: 235/75 R 17.5 3PMSF Brake System: Brake system according to EU regulations with EBS-E (4S3M) Ijdpfjl Sl Izsx Ag Eotk Sockets and Lighting: Electrical system according to EU standards, 24 Volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets Connections per ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component (2K) zinc-rich primer High-quality single-colour 2K topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel Structure: High-strength fine-grained steel construction Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the front wall 2" king pin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connection panel 2 wheel chocks with holder on the front wall Mounting at the rear of the gooseneck for ALU approach ramps Bracket for beacon at trailer rear Galvanized supports under sloped area of load floor White reflective tape per EU regulations on sides, extension, and red at the rear Electro-hydraulic unit under the rear of loading platform Warning sign brackets including sockets left/right on gooseneck and rear plate Control valves for ramps mounted right side of trailer Mudflap at rear of trailer Manual and documentation on USB stick 3.5" loose king pin supplied On gooseneck: ALU side boards and rear wall, plug-in approx. 2,440 x 400 mm (LxH) Removable rear galvanized stakes (Body length approx. 2,560 mm) 3 pairs WADER container pockets for 1x 20'/30' or 1x 40' container 6 pairs stake pockets for 100 x 50 mm plug-in stakes in outer frame Galvanized extensions, extendable by approx. 230 mm per side Lift axle on front axle, controlled via TEBS E according to actual axle load and current payload Square climbing strips 20 x 20 mm every 200 mm on outer frame chamfer of load floor Checker plate coverings above the king pin and loading area...

Stanje: novo, lastna masa: 13.250 kg, največja dovoljena obremenitev: 47.550 kg, skupna masa: 60.800 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 245/70 r17.5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings 30 mm thick hardwood flooring Extendable loading platform: Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8° 5 pairs of outward-folding lashing rings 3 pairs of outward-folding lashing rings 1 pair of flat lashing rings at the front of the loading area Cut-outs in the outer frame of the loading area for inserting tension straps Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Two-part steel ramps: One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering. Ramp with hydraulically folding and unfolding parts, hydraulic lifting system, and hydraulically adjustable position. Maximum load per pair: 40,000 kg Landing legs: JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tires: BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool Tires 245/70 R 17.5 Braking system: Braking system according to EU regulations with EBS-E (4S3M) without connecting lines to tractor unit Steel construction: Steel construction made from high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer High-quality one-color two-component (2K) top coat in Novagrau Rear section metallized and painted in RAL 9010 (pure white) Metallic paint not possible Electrical system: Electrical system according to EU regulations, lighting 24 volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Connections conforming to ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Iedpfx Asl Uxdksg Ejtk Accessories included: 2" kingpin One galvanized steel headboard approx. 400 mm high At the galvanized front connection strip, yellow-red air couplings 4 wheel chocks with holders at the headboard One spare wheel with holder in front of the headboard Electro-hydraulic power unit Rear and front remote steering via cable remote control with push-buttons, with single-track control of the axles Bracket at rear of gooseneck for ALU drive-on ramps European reflector signs (red-yellow) at trailer rear White reflective tape according to EU regulations at the sides, at the extension, and red at the rear At the gooseneck and on the ramps left and right, each with a holder for warning signs including socket One holder for beacon at trailer rear Galvanized folding supports under the loading platform chamfer Ramp operating valves fitted on the right side of the trailer Cover plates to bridge the gap between ramps and loading platform One mudflap at trailer rear Manual and description on USB stick Central lubrication system BEKAMAX (Pico) with general-purpose grease NLGI-2 and removable pump guard On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm The rear galvanized stakes are removable, superstructure length approx. 2,560 mm One INOX toolbox 1,350 x 400 x 400 on the gooseneck, box covers oil filler cap 4 pairs of WADER container pockets in the loading area for a

Stanje: rabljeno, prva registracija: 01/1989, barva: rdeča, Leto izdelave: 1989, Oprema: ABS, Langendorf 2-axle Low loader with ramps ABS Tyres 60% GR 10.5-20 10PR IDNR 686 We look forward to advising you, signing the contract or handing over the vehicle at our dealership. Please arrange an appointment. If you are unable to visit us in person, we offer full processing via phone, email, WhatsApp or fax. On request, we can deliver your new vehicle directly to your door. This means you benefit from the best price as well as maximum safety and convenience when making your purchase. We are happy to accept your used vehicle as part exchange. We offer digital vehicle valuation based on photos of your vehicle without requiring a visit to our dealership. Our specialised purchasing team guarantees you the highest price. On request, we can deliver your new pre-owned vehicle nationwide directly to your doorstep and collect your old vehicle—trade-in, financing, or leasing options available. Instant approval and old loan settlement possible. Itsdpfjxxkrrsx Ag Eek Your specialist partner for cars, vans, commercial vehicles, and construction machinery. ITC GmbH & Co KG Siemensstraße 7 32312 Lübbecke (Industrial Estate) Over 400 vehicles always in stock. All information provided in advertisements, on the internet, price tags and images are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability/warranty for typographical or transmission errors. Listed features may need to be checked separately. All offers are generally without new TÜV inspection; we are happy to provide you with an offer for a new inspection via our partner workshop. Subject to errors and prior sale. = Further information = Unladen weight: 1,700 kg Payload: 3,300 kg Gross vehicle weight: 5,500 kg VAT/margin scheme: VAT deductible.

Stanje: novo, lastna masa: 500 kg, največja dovoljena obremenitev: 1.300 kg, skupna masa: 1.800 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 3.150 mm, širina tovornega prostora: 1.580 mm, višina nakladalnega prostora: 1.900 mm, vzmetenje: drugo, velikost pnevmatike: 185 r14 c, Box Trailer Major X-pert Edition Outstanding box trailer with an attractive design. 315x158x 1800 kg, single axle 100 km/h Ramp + side door Low fuel consumption, comfortable driving, sandwich panel construction Iedpfxjqwkt Rj Ag Ejtk Equipped with special rails for attaching lashing rings anywhere, allowing cargo to be secured at any position. If you have any questions, please send us a message or call us! Technical modifications, price changes, errors, and prior sale reserved. We accept no liability for errors or typographical mistakes.

Stanje: novo, vzmetenje: drugo, barva: drugo, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Storage compartment for aluminium ramps, price per compartment, length approx. 2.48 m, width approx. 1 m, height approx. 27 cm, -- printing errors, mistakes and changes reserved, sample images --, For more data see: !, More details: ! Itodpfxoztd Nys Ag Eok

Stanje: rabljeno, lastna masa: 500 kg, največja dovoljena obremenitev: 1.300 kg, skupna masa: 1.800 kg, dolžina tovornega prostora: 3.100 mm, širina tovornega prostora: 1.800 mm, Spletna platforma za nakup prikolice, kjer lahko kupite novo ali rabljeno prikolico in jo takoj odpeljete! Na zalogi imamo več kot 850 novih prikolic. Stalno imamo v ponudbi več kot 130 rabljenih prikolic. Na zalogi imamo več kot 150 tovornih prikolic – različnih modelov s široko izbiro dodatne opreme. Itedpfxeztqrzj Ag Eok Kot primer, neobvezujoča ponudba: rabljena prikolica zelo malo uporabljena v zasebnih namenih platforma s pritrdilnimi obroči na straneh za prevoz vozil ali motociklov notranje mere tovornega prostora: približno 310 x 180 x 10 cm zunanje mere: 445 x 190 cm, skupna višina: približno 70 cm sistem pritrdilnih trakov na tleh za motocikle in manjša strojna vozila Prva registracija, en lastnik, registrirana 04.2024 Tehnični pregled veljaven ob nakupu Vitli na stojalu Nagibne rampe, integrirane pod tovorno ploščo Skupna masa: 1800 kg, prazna masa: pod 500 kg Podvozje za hitrost 100 km/h, starost pnevmatik ustreza času montaže Lokacija vozila: Renania, blizu Düsseldorfa/Köln Ogled je zelo priporočljiv, vendar je možen le po predhodnem dogovoru. Na voljo po dogovoru! Naročila sprejemamo po telefonu: ponedeljek – petek, od 8.00 do 12.30 in od 14.00 do 18.00 ali novo prikolico lahko naročite kadar koli preko naše spletne trgovine. Slike in opis te reklamne objave so zaščiteni z avtorskimi pravicami – logotipi so zaščiteni s pravicami znamke. rabljeno, Eduard Multi, serijska številka 08/26

Stanje: rabljeno, največja dovoljena obremenitev: 23.900 kg, skupna masa: 31.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2007, Leto izdelave: 2007, Notranja št. vozila: G400178 Na voljo takoj na našem dvorišču v Kaufungenu VEČ INFORMACIJ: Luis Lucena Viktoria Sologubova NEMŠČINA Müller-Mitteltal TS2 KOMPAKT prikolica za težke tovornjak ? 2 osi ? hidravlične rampe Robustna prikolica Müller-Mitteltal TS2 KOMPAKT, izdelana leta 2007. Prikolica z 2 osmi ima hidravlične rampe, zračno vzmetenje in nosilnost 23.900 kg. Z dovoljeno skupno maso 31.000 kg je še posebej primerna za transport težkih gradbenih in delovnih strojev. Tehnični podatki: * Št. vozila: G400178 * Stanje vozila: Rabljeno vozilo * Kategorija: Prikolica za težke tovornjak * Proizvajalec: Müller-Mitteltal * Model: TS2 KOMPAKT * Prva registracija: 06/2007 * Letnik: 2007 * Osi: 2 * Dovoljena skupna masa: 31.000 kg * Lastna teža: 7.100 kg * Nosilnost: 23.900 kg * Skupna dolžina: 10.800 mm * Nemško vozilo Oprema: * Hidravlične rampe * Zračno vzmetenje * Dvooksna šasija Isdpfx Agozahg Ds Eotk * Robustna konstrukcija prikolice za težke tovornjak Ogled in preizkus delovanja je možen po predhodnem dogovoru. Dodatne informacije, fotografije in videoposnetke lahko dobite na zahtevo. Pridržujemo si pravico do sprememb, napak in predhodne prodaje. ANGLEŠČINA Müller-Mitteltal TS2 KOMPAKT low-loader trailer – 2 osi – hidravlične rampe Robustna prikolica Müller-Mitteltal TS2 KOMPAKT, izdelana leta 2007. Ta dvooksna prikolica je opremljena s hidravličnimi rampami za nakladanje, zračnim vzmetenjem in nosilnostjo 23.900 kg. Z dovoljeno skupno maso 31.000 kg je še posebej primerna za transport težkih gradbenih in delovnih strojev. Tehnične specifikacije: * Referenčna številka: G400178 * Stanje: Rabljeno * Kategorija: Prikolica za težke tovornjak * Proizvajalec: Müller-Mitteltal * Model: TS2 KOMPAKT * Prva registracija: 06/2007 * Leto izdelave: 2007 * Osi: 2 * Dovoljena skupna masa: 31.000 kg * Lastna teža: 7.100 kg * Nosilnost: 23.900 kg * Skupna dolžina: 10.800 mm * Nemška prikolica Oprema: * Hidravlične rampe za nakladanje * Zračno vzmetenje * Dvooksna šasija * Robustna konstrukcija prikolice za težke tovornjak Ogled in preizkus delovanja sta možna po predhodnem dogovoru. Dodatne informacije, fotografije in videoposnetke lahko dobite na zahtevo. Pridržujemo si pravico do sprememb, napak in predhodne prodaje. Pridržana pravica do sprememb. Z veseljem sprejmemo vaše rabljeno vozilo v plačilo. Financiranje je mogoče neposredno pri nas. GOLEC NUTZFAHRZEUGE GMBH Govorimo: nemško, angleško, špansko, poljsko, ukrajinsko, rusko, bolgarsko.

Stanje: rabljeno, največja dovoljena obremenitev: 31.820 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/1980, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 3.000 mm, skupna širina: 2.550 mm, skupna višina: 900 mm, Leto izdelave: 1980, Oprema: ABS, dvižna zadnja plošča, Prikolice Müller-Mitteltal T4, prikolica z nizko nosilno površino * Osne osi SAF s kolutnimi zavorami * Dvojne pnevmatike * Nizka nosilna površina z razširitvijo * Hidravlične nakladalne rampe, pomične (2 kosa) * Prekošen vmesni del, po katerem se lahko vozi * Dodatne opore zadaj * Izvedba z vrtljivo ploščo Itodpfxoy Skl Ie Ag Ejk ----Dimenzije in nosilna površina: dolžina nosilne površine približno 9.800 mm * Širina nosilne površine: 2.550 – 3.000 mm * Višina nosilne površine: 900 mm ----* Dovoljena skupna masa: 40.000 kg * Nosilnost: 31.820 kg * Pnevmatike: 235/75R17.5 ----Števila vozil: 11892----Pridržujemo si pravico do sprememb in napak.----Oglaševanje in različne napisne oznake so bile digitalno odstranjene. -----Z veseljem vam bomo pomagali pri vseh formalnostih, ki nastanejo pri nakupu vozila. Enostavno nam sporočite vaše želje in predloge, mi pa bomo poskrbeli za ostalo. Poleg tega vam lahko za doplačilo ponudimo naslednje storitve:----Prevzem vašega starega vozila * Tehnični pregled/odobritev * Celotna ureditev izvoza * Posredovanje pri financiranju * Prijava za izvozne oznake * Prevoz vozil * Registracija vozil * Reševanje in transport vozil ----?VAŠA VTS EKIPA

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * Profil PT 30: ----Zavore: * EBS (električni zavorni sistem) * Naprava za hitro sprostitev zavor za vzmetne akumulatorje * Bobnaste zavore ----Osi: * 3 x 11 ton, osi Gigant ----Vzmetenje: * Zračno vzmetenje s sistemom za dvigovanje in spuščanje ter ventilom RtR ----Povezava: * Povezava dolžine 1.200 mm s 40 mm vlačilnim ušesom in nastavitvijo višine s pomočjo vzmetne palice in objemke ----Elektrika / osvetlitev: * Pametna plošča, nameščena na prikolici, kot informacijsko orodje (za prikaz obremenitve osi – ločeno spredaj in zadaj) * Nadzor tlaka v pnevmatikah z možnostjo prikaza v tovornjaku prek signala EBS, brez dodatne namestitve v tovornjaku * 15-polni električni vtič * LED-osvetlitev 12 / 24 V * LED-rotacijska svetilka (odstranljiva) zadaj ----Splošni dodatni deli: * Stranski zaščitni element * Stranske podpore zadaj na okvirju * Mehansko nastavljivi paketi opozorilnih tabel spredaj in zadaj * Sprednji plastični četrtni blatniki z zaščito proti brizganju * Zadnji ravni jekleni ploščati ščiti z zaščito proti brizganju * Orodjarna škatla iz pocinkane jeklene pločevine, približno 650 x 300 x 600 mm, črna, prašno lakirana, na desni strani * Predal v podvozi za dodatno opremo s pokrovom, 2 kosa kontinentalskih zapah, trajno vgrajen (neposredno za podvozjem) * 2 kosa stopnic, pocinkanih, na podvozju, levo in desno ----Površina nizkega prikolice: * ROBOTER: varjena protidrsna prevleka na jekleni plošči podvozja (izstopajoči varjeni robovi) ----Varnostno pripenjanje tovora (paket za pripenjanje tovora, sestavljen iz): * 2 pritrdilne točke (13,4 tone) spredaj levo in desno na nosilcu čelne stene * Spredaj in zadaj 1 par UVV prstenov (13,4 tone), poleg tega stransko po 3 pare UVV prstenov (10 ton), z možnostjo nagibanja in spuščanja, obremenljivi v vse smeri in vgrajeni v zunanji okvir * Stransko po 3 žepe za pasove z možnostjo pripenjanja 2 ton * Profifix palica za pripenjanje v vzdolžni osi na sredini, v ravni površini za možnost pripenjanja do LC 3000 daN ----Razširitev: * 6 parov mehanskih iztegnih podpor za 3 m skupne širine (vendar ne na zadnji poševnici) * Razširitvene deske, položene v sredini tovorne površine ----Rampe: * hidr. enodelne rampe, približno 3.000 x 720 mm * mehansko, stransko nastavljive * Krmilni blok 4-na, za poznejšo vgradnjo hidravlične premika rampe Itedpfx Ajxptn Rsg Eek ----Nosilec za bager: * Nosilec za bager čez zadnjo os, neprekinjen do končnega nosilca (skupna dolžina približno 2.100 mm) * 2 para pritrdilnih točk LC 6400 daN v nosilcu za bager, stransko v vzdolžnem okvirju ----Višina nakladanja: * obremenjen približno 910 mm +/- 20 mm zračno vzmetenje ----Lakiranje: * Podvozje, podvozje, iztegnine, podpore in rampe so vroče pocinkani * Osi, vrtljivi obroč, rezervoar za zrak, vlečna vilica so pobarvane v črni barvi ----Informacije: * Novo vozilo z garancijo proizvajalca * Napake in vmesna prodaja so pridržane ----Čas dostave: * dobavljivo od približno 45. tedna leta 2026

Stanje: novo, Ponujamo vam naše popolnoma nove 20-ft. pomorske kontejnerje z vgrajenimi rolo vrati. Vaše prednosti na prvi pogled: ✔️ Suho skladiščenje. Kontejnerji so odporni na veter in vodo. ✔️ Enostavno rokovanje zahvaljujoč rolo vratom namesto dvokrilnih vrat. ✔️ Popolno kot garaža, skladiščni prostor itd. ✔️ Nov kontejner – ena pomorska plovba. ✔️ Barva – na voljo različne RAL barve. ✔️ Dolgotrajni. Pomorski kontejnerji iz korten jekla zdržijo več kot 30 let. ✔️ Cena vključuje dostavo po vsej Nemčiji (iztovarjanje s pomočjo žerjava je možno z doplačilom). Zunanje mere / Notranje mere Dolžina: 6.058 mm / 5.898 mm Širina: 2.438 mm / 2.350 mm Višina: 2.591 mm / 2.390 mm Pošljite nam vaše povpraševanje! Vaša Globaltainer GmbH ekipa Itsdpsy T Igrefx Ag Eek