Dollco Gradbeni Stroji Z Nizkim Nakladalnikom nakup rabljenega (39.458)

Stanje: rabljeno, lastna masa: 2.600 kg, skupna masa: 10.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/1993, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.000 mm, prostornina tovornega prostora: 12 m³, velikost pnevmatike: 205/65 R17,5, medosna razdalja: 990 mm, Colour: orange/silver Drum brakes Payload: 7,400 kg Leaf suspension Side walls: 600 mm + 400 mm extension BPW axles Lashing rings Hodjtr Tzdopfx Acnjt Subject to errors and alterations.

Stanje: rabljeno, lastna masa: 3.440 kg, največja dovoljena obremenitev: 14.560 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2017, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, Oprema: ABS, | Krone tandem prikolica ZZ | Spojka za nizko prikolico | BPW osi z diskovimi zavorami | Nosilec rezervnega kolesa | Gume: 385/55R22,5 | avstrijsko vozilo | Kontejner na zahtevo | Zadnja opora | Pridržujemo si pravico do sprememb, napak in predprodaje. | Most za preklapljanje tovorne enote | 7,80 metra dolžine | 7,60 m notranje dolžine | 2,0 m notranje višine | 2,48 m notranje širine | Pritrdilne točke 5,85 m | dobro stanje | Vrata tipa portal Hsdezwx R Tspfx Acnot

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 9.200 kg, največja dovoljena obremenitev: 29.800 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 850 mm, skupna dolžina: 13.700 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 R 17.5, barva: bela, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, polprikolica De Angelis, nova, z rampon, takoj na voljo, razen če je že prodana, 3 osi s pnevmatičnim vzmetenjem, 3. os je vodljiva, sistem EBS, tovorna površina dolžine 10 m, višina od tal 85 cm, dvojne elektrohidravlične rampe z dvojnim batom za popolno odpiranje, rampe so nastavljive po širini, rampe so vroče pocinkane, par stranskih kavljev Rud in nosilci, talna obloga iz jeklene pločevine in lesa, 12 pnevmatik 245.70 R 17.5, stranske ograje iz aluminija, garancija proizvajalca, POOBLAŠČENI TRGOVEC INTERDRIVE SRL-PARMA. Hsdpfx Aoznm Tqjcnjt

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 9.500 kg, največja dovoljena obremenitev: 30.500 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2022, skupna dolžina: 13.650 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 r 17.5, odmik od tal: 850 mm, barva: modra, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2022, Oprema: ABS, dvižna zadnja plošča, polprikolica, prikolica s vitlom Komodo, rabljena, z nizko konstrukcijo in podaljšanim nosom, z dvojnimi, električno-hidravlično razširljivimi rampami, dolžina platforme 10 m, višina od tal 86 cm, stranski podaljševalniki, pari 8-tonskih stranskih kavljev za pritrditev tovora, 80-centinski električni vitel z jeklenico in kavljem ter mehanizmom za navijanje, 3 osi s prilagodljivim zračnim vzmetenjem, 1. os je dvigljiva, 3. pa krmilna, leto izdelave 2022, preverjena do 31.01.2027 – POOBLAŠČENI PRODajalEC INTERDRIVE SRL – PARMA. Hodpszp E Hxefx Acnet

Stanje: novo, največja dovoljena obremenitev: 38.100 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.100 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 760 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R17.5 3PMSF, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer of approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading platform: 5 pairs of fold-out lashing rings 3 pairs of fold-out lashing rings 1 pair of horizontal lashing rings at the front of the loading area Cut-outs in the outer frame of the loading surface for hooking in tension belts Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Landing legs: JOST landing legs with 2-speed gears for a 24 t lifting capacity Axles and tyres: BPW axles, two axles are fixed, two axles are self-steering, air-suspended, with drum brakes, with lift/lower function The self-steering axles come with an electro-magnetic reverse lock, which is activated via reverse gear or manually Axle toolkit Tyres: 205/65 R17.5 3PMSF Brake system: WABCO brake system according to EU regulations with EBS-E Steel construction: Steel structure made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical equipment: Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK lighting ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame ensured by a 2-component zinc dust primer High-quality single-colour 2-component top coat in MB 7350 Novagrau No metallic paint possible Rear section metallized and painted in RAL 9010 Accessories included: 1 spare wheel 205/65 R 17.5 TPMS tyre pressure monitoring system acc. to ECE R 141 At the galvanized front connection strip yellow-red air couplings 4 wheel chocks with holder on front wall Hjdjtphtmopfx Acnjt Bracket at rear of gooseneck for ALU access ramps Galvanized folding supports under the chamfer of the loading surface Mount for a revolving beacon at the rear of the trailer Height-adjustable curtain structure Galvanized front wall with a tension mechanism for the sliding curtains Height-adjustable by approx. 400 mm "EDSCHA" brand roof, sliding forward on ALU roof beam profiles, bolted to the front and rear wall In the loading surface, 3 pairs of sliding stakes Superstructure at rear hydraulically extendable to left and right by approx. 750 mm Sliding roof with upward swinging portal carrier Sliding tarp with 700 mm reserve length, with tension straps at intervals of approx. 600 mm Height to top edge of superstructure approx. 3,960 mm Journeys with the sliding roof open are not permitted and will damage the tarp Mounting rail for ALU access ramps at the rear of the vehicle At the gooseneck and at the rear panel left and right, each with a mount for warning signs incl. socket A mud flap at the rear of the trailer European reflector plates at the rear of the trailer 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading area Lifting axle on the front axle controlled by TEBS E depending on current axle load and load status Rear structure with closed ALU double-wing doors A sanded, anti-slip paint layer on the checker plates on the gooseneck and on the loading surface BEKAMAX centralized lubrication system with standard grease NLGI-2 and a removable guard around the pump Speed stickers 80 km/h on rear and both sides Load manometer for axle load determination including load chart

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, lastna masa: 7.440 kg, največja dovoljena obremenitev: 23.560 kg, skupna masa: 31.000 kg, konfiguracija osi: 2 osi, dovoljena osna obremenitev (os 1): 11.000 kg, dovoljena osna obremenitev (os 2): 11.000 kg, prva registracija: 08/2015, naslednji pregled (TÜV): 07/2027, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.550 mm, skupna dolžina: 12.830 mm, skupna širina: 2.550 mm, vzmetenje: zrak, stanje pnevmatik: 50 odstotek, Leto izdelave: 2015, Oprema: ABS, Lep nizkotovorni prikolica z neprekinjeno elektrohidravlično rampo (NATO vtičnica na strani vozila). Idealno za viličarje, gradbene stroje in dvižne platforme. Prikolica je pocinkana, zato ni rje. Na splošno je v dobrem stanju. Trenutno se še uporablja. Viličar seveda ni vključen. Hedpfx Acszkkgaenot Če imate kakršna koli vprašanja, se obrnite na nas.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 11.500 kg, največja dovoljena obremenitev: 27.500 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2014, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 3.150 mm, skupna dolžina: 13.700 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 205.65 r 17.5, odmik od tal: 750 mm, barva: svetlo zelena, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2014, Oprema: ABS, Rabljen polpriklopnik nizkopodna prikolica Meusburger Buche s ponjavo, 4 osi, 3. in 4. krmiljeni, 1. os dvižna, vdolbine v podu z odstranljivimi pokrovi, razširljiva in po višini nastavljiva ponjava, drsna streha, zadnja vrata, priprava za odstranljive zadnje klančine, RUD kavlji ob strani in v podu, ležišča za stebre rulasi s prečkami preko podna, ponjave prilagojene za stranski izredni tovor z izvlečnimi tablami, notranja višina 3,10 m + dodatek 40 cm v vdolbinah, letnik 2014, zadnje stabilizacijske noge. PRODAJALEC INTERDRIVE SRL-PARMA. Hjdpoy T Rursfx Acnet

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, moč: 11,2 kW (15,23 KM), vrsta prenosa: samodejen, vrsta goriva: dizel, poraba goriva na uro: 1,8 l/h, kapaciteta rezervoarja za gorivo: 18 l, barva: rumena, obratovalna teža: 1.640 kg, stanje verige: 100 odstotek, število sedežev: 1, prostornina žlice: 0,027 m³, širina izkopne žlice: 400 mm, Leto izdelave: 2024, obratovalne ure: 2 h, Oprema: dodatne luči, gumene gosenice, hidravlika, hidravlika prijemala, hidravlično kladivo, pogon na vsa štiri kolesa, standardna žlica, With us, you get reliable and robustly engineered mini excavators with numerous extras and stylish design. Model BK1700JS with low-loader trailer and basic accessory package! Highlights: - Joystick control next to the operator’s seat - Kubota engine with warranty - Swing boom - Hydraulic excavator thumb - Operator protective guard Our machines are sold as demonstration vehicles, as loading and unloading for transport to us as well as minor test drives may result in the machines having up to a maximum of 5 operating hours. With every excavator you purchase from us, you receive a CE certificate, an invoice with itemized VAT, and an operating/repair manual in German. In addition, we naturally offer commercial financing, spare parts procurement, and excellent service! This vehicle is AVAILABLE IMMEDIATELY! Technical data of the excavator: Hedpfett D R Tex Acnst - Model: BK1700JS excavator with KUBOTA engine - Brand: Berger Kraus - Operating weight: 1640 kg - Standard bucket capacity: 0.027 m³ - Engine: KUBOTA EURO 5 (D902) 3-cylinder water-cooled - Rated power: 11.8 kW (15 HP) / 2300 rpm - Torque: 51.3 Nm - Main pump: BEIFANG - Slewing motor: EATON BRAND (USA) - Undercarriage: EATON BRAND (USA) - Travel speed: 2.5 km/h - Fuel tank capacity: 18 L Working ranges: - Max. digging depth: 2200 mm - Max. digging height: 3230 mm - Max. dumping height: 2260 mm - Max. digging radius: 3550 mm - Max. blade lift height: 215 mm - Max. blade depth: 190 mm - Min. turning radius: 1520 mm - Slewing radius: 360° Dimensions: - Track width: 1100 mm - Total track length: 1434 mm - Ground clearance: 418 mm - Track gauge: 180 mm - Swing radius (rotation): 790 mm - Cab height: 2371 mm - Seat height: 1600 mm Technical data trailer: - Loading area dimensions: 2600 x 1530 mm - Permissible total weight: 2700 kg - Unladen weight: approx. 544 kg - Payload: approx. 2156 kg - Overrun brake system by Knott - Axles incl. brake system by Knott - LED marker lights - LED outline lights - Hot-dip galvanized ramp with support bar - Bucket rest - Screen-printed floor including lashing rings for securing - Axle load per axle 1/2: 1350/1350 kg - Automatic jockey wheel - V-drawbar Accessory package: - Quick coupler - 200 mm bucket - 400 mm bucket - 1000 mm bucket - Grapple for wood, kerbstones, manure, etc. - Ripper tooth - Rake - Earth auger - Toolbox - Hydraulic excavator thumb pre-installed In addition to the accessory packages, we offer a further selection of attachments, all of which can be found on our website. You can contact us by phone or email, and we will prepare an individual offer for you. As a licensed Berger Kraus and Martz partner, we are your contact point should you require spare parts or additional accessories, or for any questions and suggestions regarding your new work machine. All information is provided without guarantee; errors and changes reserved.

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, moč: 18,2 kW (24,75 KM), vrsta prenosa: hidrostat, vrsta goriva: dizel, barva: rumena, skupna masa: 2.300 kg, dvižna moč: 900 kg/m, dvižna višina: 2.100 mm, velikost pnevmatike: 31x15.5-15, stanje pnevmatik: 100 odstotek, stanje pogona: 100 odstotek, konfiguracija osi: 2 osi, število sedežev: 1, tip droga: simpleks, širina izkopne žlice: 1.500 mm, obratovalne ure: 1 h, Oprema: 4-v-1 lopata, dodatne luči, hidravlika, hidravlika prijemala, hidravlično kladivo, kabina, spojka prikolice, standardna žlica, vilice za palete, For sale is a Berger Kraus BK810 wheel loader/farm loader with Kubota engine, offered as a complete package with 3-axle low-loader trailer and fork/bucket set! Key features: - Quick coupler operated via joystick - Suspension seat - EURO tool carrier - Float position (floating function) - 2-speed automatic transmission - Differential lock - Reversing camera - 3rd & 4th hydraulic control circuits We offer financing for commercial customers, spare parts procurement, and reliable service! Private buyers welcome! Technical specifications (loader): - Engine: Kubota V1505-EF1 - Power: 18.2 kW / 2300 rpm / 1500cc - Operating weight: approx. 2300 kg - Lifting capacity: approx. 900 kg - Dumping height: approx. 2100 mm - Hydraulic pump output: 45 l/min - Italian PWG hydraulic system - Double pump (piston drive up to 66 l/min, gear drive up to 42 l/min) - Digital display - Hydrostatic drive - Telescopic arm - 3rd & 4th hydraulic control circuits - Electric joystick - Reversing camera - Hydraulic quick coupler - Dimensions (L/W/H, with bucket & cab): approx. 4450x1600x2350 mm - Beacon - Tyres: 31x15.5-15 - Roof-mounted radio with speakers - Float function - Differential lock - Parallel lift to approx. 1.6 m lifting height - Cabin heater - Adjustable steering wheel - Adjustable driver’s seat - Suspension seat - Brake booster - Hydraulic brake - 2-speed automatic transmission - Fan - Fire extinguisher - Automatic gear selection in maneuvering mode Technical specifications (trailer): - Load area (LxW): 4000x1820 mm - Permitted gross weight: 3500 kg - Unladen weight: approx. 817 kg - Payload: approx. 2683 kg - Overrun device by Knott - Axles with brake system by Knott - LED marker lights - LED outline lights Hjdpfx Acowcrgzsnjt - Hot-dip galvanized loading ramp with support brackets - Anti-slip floor, incl. tie-down rings - Axle loads per axle 1/2/3: 1350/1350/1350 kg - Shock absorbers on all 3 axles, rated for 100 km/h - Support load: 150 kg - Tyres: 195/50R13C - Wheel chocks - Support wheel with folding function Accessory package: - Fork set: EURO mount - Standard bucket: EURO mount Of course, you can also customize your accessory package according to your needs and requirements. Simply contact us for a tailored solution! As a licensed Berger Kraus and Martz partner, we are your contact if you need spare parts or additional attachments, or if you have any questions and requests regarding your new machine. All information provided without guarantee. Subject to errors and change.

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, moč: 10,2 kW (13,87 KM), vrsta prenosa: samodejen, vrsta goriva: dizel, barva: rumena, obratovalna teža: 1.100 kg, dvižna višina: 2.610 mm, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, število sedežev: 1, prostornina žlice: 0,026 m³, širina izkopne žlice: 380 mm, Leto izdelave: 2025, obratovalne ure: 2 h, Oprema: dodatne luči, gumene gosenice, hidravlika, hidravlika prijemala, hidravlično kladivo, nastavljivo podvozje, pogon na vsa štiri kolesa, standardna žlica, With us, you receive reliable and robustly engineered mini excavators with numerous extras and stylish design. Included in this offer: Mini excavator, single-axle low-loader/trailer, and a small accessories package! Our units are sold as demonstration vehicles, as the process of loading and unloading for transport and brief test runs may result in up to 5 operating hours on the machines. With every excavator you purchase from us, you will receive a CE certificate, an itemized invoice with VAT, and an operator’s/repair manual in German. We also offer financing for commercial clients, spare parts procurement, and excellent service! The boom cylinder mounted on top reduces damage and increases the maximum digging depth to 1.75 m! Technical data of the excavator: - Model: BK1250JSR JOYSTICK with swing arm and adjustable undercarriage - Brand: Berger Kraus - Operating weight: 1100 kg - Bucket capacity of pre-installed bucket: 0.026 cubic meters - Bucket width of pre-installed bucket: 380 mm - Engine: KUBOTA EURO 5 (D722 / E711) 3-cylinder water-cooled (diesel) - Rated power: 10.2 kW / 2500 rpm - Displacement: 719 cc - Main pump: TIANJIN double gear pump (15L + 7.5L at 2500 rpm) - Hydraulic system pressure: 16 MPa - Slew motor: EATON (USA) - Travel motor: ZHENJIANG with overflow function - Travel speed: 1.2 km/h Working ranges: - Ground-level digging reach: approx. 3030 mm - Max. digging reach: approx. 2940 mm - Max. digging depth: approx. 1750 mm - Max. dumping height: approx. 2610 mm - Max. discharge height: approx. 1740 mm - Max. vertical digging depth: approx. 1655 mm - Minimum turning radius: approx. 1490 mm - Max. bucket lift height: approx. 345 mm - Max. bucket digging depth: approx. 240 mm - Slew radius: 360° Dimensions: - Wheelbase: 920 mm - Total track length: 1230 mm - Undercarriage width: 880-1100 mm (adjustable) - Undercarriage ground clearance: 132 mm - Track width: 180 mm - Turning radius: 784 mm Hodpfx Aew Dfubocnst Technical data trailer: - Bed dimensions (L x W): 2600 x 1503 mm - Permissible total weight: 1800 kg - Unladen weight: approx. 478 kg - Payload: approx. 1322 kg - Knott overrun device - Axles including brake system by Knott - LED marker lights - LED contour lights - Drive-on ramp, hot-dip galvanized with support bar - Anti-slip plywood floor incl. lashing eyes for securing cargo - Axle capacity 1800 kg - Support load 100 kg - Tires: 195/50R13C 104N - Wheel chocks - Support wheel with folding function - Bucket holder Accessories package: - Quick coupler (quick-hitch) - Pre-installed excavator thumb - 800 mm bucket - 200 mm bucket - 380 mm bucket - Grapple for wood, curbstones, manure, etc. - Ripper tooth - Rake - Earth auger with 20 cm diameter - Toolbox In addition to the accessory packages, we also offer a further selection of attachments, all of which you can find on our website. Feel free to contact us by phone or email, and we will provide a customized quote tailored to your needs. As licensed Berger Kraus and Martz partners, we are your point of contact if you require spare parts, accessories, or have any questions or suggestions regarding your new work machine. All information provided without guarantee; errors and changes excepted.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 3.300 kg, konfiguracija osi: 1 os, prva registracija: 07/2025, Leto izdelave: 2025, obratovalna teža: 3.300 kg, Hydraulic cable pulling winch designed for underground cable installation, powered hydraulically by a diesel engine. The maximum pulling force of 5 tons is achieved by two multi-groove capstan heads. Mounted on a chassis, the winch is equipped with an electronic measuring device displaying pulling force, speed, installed cable length, and operating hours. The maximum pulling force can be programmed. The cable pulling winch features a fail-safe (negative) brake that is automatically activated when the control lever is released. Rope length: 500/1000 meters. Hodpsw Aznusfx Acnst

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, moč: 11,8 kW (16,04 KM), vrsta prenosa: samodejen, vrsta goriva: dizel, barva: rumena, obratovalna teža: 1.200 kg, dvižna višina: 2.620 mm, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, število sedežev: 1, prostornina žlice: 0,026 m³, širina izkopne žlice: 380 mm, Leto izdelave: 2025, obratovalne ure: 2 h, Oprema: dodatne luči, gumene gosenice, hidravlika, hidravlika prijemala, hidravlično kladivo, nastavljivo podvozje, pogon na vsa štiri kolesa, standardna žlica, With us, you receive reliable and robustly engineered mini excavators featuring numerous extras and stylish design. Included in the offer: Mini excavator, single-axle low loader/trailer, and a comprehensive accessory package! Our equipment is sold as demonstration vehicles; due to loading and unloading for transport to our premises as well as minor test drives, the machines may show up to a maximum of 5 operating hours. With every excavator purchased from us, you receive a CE certificate, an invoice with VAT shown separately, and an operating/maintenance manual in German. In addition, we naturally offer financing solutions for commercial customers, spare parts procurement, and excellent service! Technical data of the excavator: - Model: BK1300JSR JOYSTICK with swing boom and adjustable undercarriage - Brand: Berger Kraus - Operating weight: 1,200 kg - Bucket capacity (pre-installed): 0.026 m³ - Bucket width (pre-installed): 380 mm - Engine: KUBOTA EURO 5 (D902) 3-cylinder, liquid-cooled (diesel) - Rated power: 11.8 kW (15 hp) / 2300 rpm - Displacement: 898 cc - Main pump: BEIFANG 18.4 L/min - Slew motor: EATON (USA) - Travel motor: EATON (USA) - Travel speed: 1.5–2 km/h Working ranges: - Digging reach at ground level: approx. 3040 mm - Max. digging reach: approx. 3135 mm - Max. digging depth: approx. 1650 mm - Max. dumping height: approx. 2620 mm - Max. discharge height: approx. 2000 mm - Minimum turning radius: approx. 1510 mm - Max. bucket lift height: approx. 140 mm - Max. bucket digging depth: approx. 200 mm - Slew radius: 360° Dimensions: - Total track length: approx. 1235 mm - Undercarriage width: approx. 800–950 mm (adjustable) - Track width: approx. 180 mm Hodpfx Asw Dfzzscnot - Turning radius: approx. 900 mm - Cab height: approx. 2200 mm Technical data trailer: - Load bed dimensions (L x W): 2600 x 1503 mm - Permissible total weight: 1800 kg - Dead weight: approx. 478 kg - Payload: approx. 1322 kg - Overrun braking system by Knott - Axles incl. braking system by Knott - LED marker lights - LED outline lights - Hot-dip galvanized ramp with support bracket - Phenolic plywood floor incl. lashing eyes for securing loads - Axle load: 1800 kg - Support load: 100 kg - Tires: 195/50R13C 104N - Wheel chocks - Support wheel with folding function - Bucket stand Accessory package: - Quick coupler (Quick-Hitch) - Pre-installed excavator thumb - Hydraulic grading bucket, width: 800 mm - Hydraulic breaker - 200 mm bucket - 380 mm bucket - Grab for wood, kerbstones, manure, and more - Ripper tooth - Rake - Earth auger, 20 cm diameter - Toolbox In addition to the accessory packages, we offer a further selection of attachments, which can all be found on our website. Please feel free to contact us by phone or email, and we will create a customized offer for you. As a licensed Berger Kraus and Martz partner, we are your point of contact for spare parts, additional attachments, or any questions and suggestions regarding your new work equipment. All information without guarantee. Subject to errors and amendments.

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, moč: 11,8 kW (16,04 KM), vrsta prenosa: samodejen, vrsta goriva: dizel, barva: rumena, obratovalna teža: 1.200 kg, dvižna višina: 2.620 mm, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, število sedežev: 1, prostornina žlice: 0,026 m³, širina izkopne žlice: 380 mm, Leto izdelave: 2025, obratovalne ure: 2 h, Oprema: dodatne luči, gumene gosenice, hidravlika, hidravlika prijemala, hidravlično kladivo, nastavljivo podvozje, pogon na vsa štiri kolesa, standardna žlica, We offer reliable, solidly engineered mini excavators featuring numerous extras and a stylish design. Included in the offer: Mini excavator, 2-axle low-loader/trailer, and a comprehensive accessories package! Our machines are sold as demonstration vehicles. Due to loading and unloading for transport as well as minor test operations, the machines may show up to a maximum of 5 operating hours. For every excavator you purchase from us, you will receive a CE certificate, an invoice with disclosed VAT, and an operation/repair manual in German. Additionally, we offer financing solutions for business customers, spare parts procurement, and excellent service! Excavator technical data: - Model: BK1300JSR JOYSTICK with swing arm and adjustable undercarriage - Brand: Berger Kraus - Operating weight: 1200kg - Pre-installed bucket capacity: 0.026 m³ - Pre-installed bucket width: 380mm - Engine: KUBOTA EURO 5 (D902), 3-cylinder, liquid-cooled (diesel) - Rated power: 11.8 kW (15 HP) / 2300rpm - Displacement: 898cc - Main pump: BEIFANG 18.4 L/MIN - Slew motor: EATON (USA) - Travel motor: EATON (USA) - Travel speed: 1.5–2 km/h Working ranges: - Digging reach at ground level: approx. 3040mm - Max. excavation reach: approx. 3135mm - Max. digging depth: approx. 1650mm - Max. dumping height: approx. 2620mm - Max. discharge height: approx. 2000mm - Minimum turning radius: approx. 1510mm - Max. bucket lifting height: approx. 140mm - Max. bucket digging depth: approx. 200mm - Slew radius: 360° Dimensions: - Overall track length: approx. 1235mm - Undercarriage width: approx. 800–950mm (adjustable) - Track width: approx. 180mm - Turning radius: approx. 900mm - Canopy height: approx. 2200mm Trailer technical data: - Loading area dimensions: 2600 x 1530mm - Permissible total weight: 2700kg - Unladen weight: approx. 534kg - Payload: approx. 2166kg - Overrun equipment by KNOTT - Axles incl. brake system by KNOTT - LED marker lights - LED contour lights - Rear lights - Fully galvanized loading ramp with support bracket - Bucket holder - Anti-slip plywood floor incl. lashing eyes - Axle loads per axle 1/2: 1350/1350kg - Automatic jockey wheel - Support load 120kg - V-Deisel Accessories package: - Quick-coupler (quick hitch) - Pre-installed bucket thumb - Hydraulic grading bucket, 800mm wide - Hydraulic breaker - Bucket 200mm - Bucket 380mm - Grab for wood, kerbstones, manure, etc. - Ripper tooth - Rake - Auger, 20cm diameter - Toolbox In addition to the accessories packages, we offer a wide selection of further attachments, all of which can be found on our website. Feel free to contact us by phone or email for a personalized quote tailored to your needs. As a licensed partner for Berger Kraus and Martz, we are your reliable contact for spare parts, additional attachments, or any questions and suggestions regarding your new machine. All information is provided without guarantee. Errors and changes reserved. Hjdpsw Dfzbofx Acnst

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, moč: 10,2 kW (13,87 KM), vrsta prenosa: samodejen, vrsta goriva: dizel, barva: rumena, obratovalna teža: 1.100 kg, dvižna višina: 2.610 mm, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, število sedežev: 1, prostornina žlice: 0,026 m³, širina izkopne žlice: 380 mm, Leto izdelave: 2025, obratovalne ure: 2 h, Oprema: dodatne luči, gumene gosenice, hidravlika, hidravlika prijemala, hidravlično kladivo, nastavljivo podvozje, pogon na vsa štiri kolesa, standardna žlica, We offer you reliable and robustly constructed mini excavators with numerous extras and a stylish design. The offer includes: mini excavator, 2-axle low loader/trailer, and a small accessory package! Our machines are sold as demonstration units, as loading and unloading for transport as well as minor test drives may result in up to a maximum of 5 operating hours. With every excavator purchased from us, you receive a CE certificate, an invoice including VAT, and user/maintenance manuals in German. Furthermore, we naturally offer financing options for business customers, spare parts procurement, and excellent service! The top-mounted boom cylinder reduces damage risk and increases the maximum digging depth to 1.75 m! Technical specifications of the excavator: - Model: BK1250JSR JOYSTICK with swing arm and adjustable undercarriage - Brand: Berger Kraus - Operating weight: 1,100 kg - Pre-installed bucket capacity: 0.026 m³ - Pre-installed bucket width: 380 mm - Engine: KUBOTA EURO 5 (D722 / E711) 3-cylinder, liquid-cooled (diesel) - Rated power: 10.2 kW / 2,500 rpm - Displacement: 719 cc - Main pump: TIANJIN double gear pump (15L + 7.5L at 2,500 rpm) - Hydraulic system pressure: 16 MPa - Slew motor: EATON (USA) - Travel motor: ZHENJIANG with overflow function - Travel speed: 1.2 km/h Working ranges: - Ground reach: approx. 3,030 mm - Max. digging reach: approx. 2,940 mm - Max. digging depth: approx. 1,750 mm - Max. dumping height: approx. 2,610 mm - Max. discharge height: approx. 1,740 mm - Max. vertical digging depth: approx. 1,655 mm - Minimum turning radius: approx. 1,490 mm - Max. bucket lifting height: approx. 345 mm - Max. bucket digging depth: approx. 240 mm - Slewing radius: 360° Dimensions: - Wheelbase: 920 mm - Total track length: 1,230 mm - Undercarriage width: 880–1,100 mm (adjustable undercarriage) - Undercarriage ground clearance: 132 mm - Track width: 180 mm - Turning radius: 784 mm Technical data trailer: - Loading area dimensions: 2,600 x 1,530 mm - Perm. total weight: 2,700 kg - Unladen weight: approx. 534 kg - Payload: approx. 2,166 kg - Overrun brake by KNOTT - Axles incl. brake system by KNOTT - LED marker lights - LED outline lights - Rear lights - Fire-galvanized loading ramp with support bracket - Bucket support - Screen-print floor incl. lashing eyes for securing - Axle load per axle 1/2: 1,350/1,350 kg - Automatic jockey wheel - Support load: 120 kg - V-diesel Hedpfow Dftkox Acnst Accessory package: - Quick coupler (quick-hitch) - Pre-installed digger thumb - Bucket 800 mm - Bucket 200 mm - Bucket 380 mm - Grapple for wood, kerb stones, manure and much more - Ripper tooth - Rake - Earth auger 20 cm diameter - Toolbox In addition to the accessory packages, we also offer a wide range of attachments, all of which can be found on our website. Please feel free to contact us by phone or email, and we will prepare a customized offer for you. As a licensed Berger Kraus and Martz partner, we are your point of contact should you require spare parts or other attachments, or if you have any questions or suggestions regarding your new work equipment. All information is provided without guarantee. Errors and changes reserved.

Stanje: novo, številka stroja/vozila: AHW BJT 543-1320, največja dovoljena obremenitev: 2.840 kg, skupna masa: 3.500 kg, dolžina tovornega prostora: 3.200 mm, širina tovornega prostora: 1.700 mm, ANHÄNGERWIRTZ, pijaca sa preuzimanjem za vaš novu prikolicu, nudi jaka robna marke! Preko 850 novih prikolica na lageru Preko 130 polovnih prikolica stalno u ponudi Neobavezan primer: 543-3217-35-2-12 Mašinski transporter Cargo Digger Plant 2 320x170x15cm 3500kg Tandem niskopodni transporter V šasija – sa inercionom kočnicom – gume 12" – visina utovarne površine 38 cm – čelično korito pocinkovano sa perforiranim čeličnim dnom, vezna kuka po DIN standardu – nosač za kašiku montiran – sklopive i pomične čelične rampe za uspon, montiran rezervni točak, zaključavajuća kuglasta vučna spojka, ojačano točkasto postolje... Hsdpfx Aey Sb Rbecnot Prodaja 24h putem našeg internet prodavnice na trailer-shop Telefon za narudžbine: PON. – PET. 08:00 do 12:30 i 14:00 do 18:00 ili uvek putem naše online prodavnice na trailer-shop de Sadržaj i slike su podložni autorskim pravima – logotipi su zaštićeni žigom 05/26 543-1320

Stanje: novo, lastna masa: 10.100 kg, največja dovoljena obremenitev: 38.900 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, obratovalna teža: 10.100 kg, Oprema: ABS, Chassis: - Sturdy welded steel frame construction with front frame cranking and flat loading platform, rear ramped section approx. 500x100 mm - Gooseneck 200 mm with beveled corners - Sloped gooseneck end approx. 500x100 mm (traction ribs on outer frame behind rear inclination) - 2 kingpin positions with replaceable 2" kingpin - Outer frame closed on the outside as perforated frame for lashing with tension belts (chains not permitted) - Reinforced frame design / point load at the center of gravity - Prepared for extendable load platform widenings - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to end of vehicle - 1 pair wheel recesses in front of axle with steel covers (covers with Körapur coating), depth approx. 400 mm, and 1 pair between 1st and 2nd axle, steel covers - Underrun protection = extended end plate - Drop-down supports at rear Ramps: - 2-piece drive-up ramps, custom design, with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting mechanism (only in connection with electrohydraulic unit) - Width approx. 800 mm - Wood topping - Incl. traction ribs on ramps - Can be secured for travel with tension belts - Operated by manual lever mounted rear right in direction of travel - Hydraulically laterally shiftable Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gears: - Mechanical 24 t landing gears, operated from one side with load equalization Axles, Steering, and Tires: - BPW air suspension axles, each rated at 10 t axle load, airbag diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lower device, total stroke approx. 200 mm - 2nd drive position via ball valve +50 mm - 1st axle as lift axle (wired via EBS), operation fully automatic with mechanical emergency actuation via button on trailer - 3rd axle as friction steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center-fitted offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Accessories: - Plug-in side walls and rear wall on gooseneck approx. 400 mm high - Spare wheel holder - Lateral aluminum underrun protection - 4 wheel chocks Hsdpowviwksfx Acnot - Long license plate holder in end plate - 1 detachable ECE sign at rear - 11 pairs ZK modules 10t on the sides: - 2x on the gooseneck - 9x on the load platform - Steel mudguards with clear pass - Extendable warning panels incl. 3 position lamps each, front at landing gears and rear before end plate, infinitely extendable up to loading width 4,500 mm - 4 plug-in holders for warning panels in stake pockets on loading surface - 6 pairs of lateral stake pockets for 100x50 mm stakes - 2 rows of crosswise stake pockets for 100x50 mm stakes on the gooseneck from outer frame towards main frame (1x before and 1x after kingpin positions) - 3 rows of crosswise stake pockets for 100x50 mm stakes on loading platform from outer frame towards main frame (1x in front area, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in load platform for container locks to receive 1x 20ft container - Rubber apron mounted on underrun protection - Steel shot blasting, chassis hot-dip galvanized and primed - Chassis/wheel hubs/outer frame painted in DB 7350 Nova grey

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WGOSTZH5740027600, lastna masa: 15.000 kg, največja dovoljena obremenitev: 64.000 kg, skupna masa: 80.000 kg, dovoljena osna obremenitev (os 1): 12.000 kg, dovoljena osna obremenitev (os 2): 12.000 kg, dovoljena osna obremenitev (os 3): 12.000 kg, dolžina tovornega prostora: 18.000 mm, širina tovornega prostora: 3.000 mm, prostornina tovornega prostora: 15 m³, skupna dolžina: 16.715 mm, skupna širina: 2.550 mm, skupna višina: 900 mm, vzmetenje: hidravlika, velikost pnevmatike: 235, stanje pnevmatik: 90 odstotek, medosna razdalja: 1.320 mm, največja hitrost: 80 km/h, barva: modra, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2024, Oprema: ABS, dvižna zadnja plošča, nalagalnik, oporno kolo, osrednja vrtljiva plošča, močna prikolica s petimi osmi in nizko nosilno konstrukcijo (prikolica z nizko platformo); razširljiva prikolica z dvojnimi hidravličnimi rampami. Hsdpfxjzuc Udo Acnst

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 11,8 kW (16,04 KM), vrsta prenosa: samodejen, vrsta goriva: dizel, barva: rumena, obratovalna teža: 1.200 kg, dvižna višina: 2.620 mm, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, število sedežev: 1, prostornina žlice: 0,026 m³, širina izkopne žlice: 380 mm, Leto izdelave: 2025, obratovalne ure: 1 h, Oprema: dodatne luči, gumene gosenice, hidravlika, hidravlika prijemala, hidravlično kladivo, nastavljivo podvozje, pogon na vsa štiri kolesa, standardna žlica, We offer you reliable and robustly engineered mini excavators with numerous extras and an attractive design. The offer includes: mini excavator, 2-axle low-loader/trailer, and a small accessory package! With every excavator you purchase from us, you receive a CE certificate, an invoice with VAT shown separately, and an operating / repair manual in German. Additionally, we offer financing options for business customers, spare parts procurement, and excellent service! Technical data of the excavator: - Model: BK1300JSR JOYSTICK with swing boom and adjustable undercarriage - Brand: Berger Kraus Hsdpfx Acew Dfznsnst - Operating weight: 1,200 kg - Bucket capacity of pre-installed bucket: 0.026 m³ - Bucket width of pre-installed bucket: 380 mm - Engine: KUBOTA EURO 5 (D902) 3-cylinder liquid-cooled (Diesel) - Rated power: 11.8 kW (15 hp) / 2,300 rpm - Displacement: 898 cc - Main pump: BEIFANG 18.4 L/min - Slew motor: EATON (USA) - Travel motor: EATON (USA) - Travel speed: 1.5–2 km/h Working ranges: - Digging reach at ground level: approx. 3,040 mm - Max. digging reach: approx. 3,135 mm - Max. digging depth: approx. 1,650 mm - Max. dumping height: approx. 2,620 mm - Max. discharge height: approx. 2,000 mm - Minimum turning radius: approx. 1,510 mm - Max. bucket lift height: approx. 140 mm - Max. bucket digging depth: approx. 200 mm - Slew radius: 360° Dimensions: - Total track length: approx. 1,235 mm - Undercarriage width: approx. 800–950 mm, adjustable undercarriage - Track width: approx. 180 mm - Turning radius: approx. 900 mm - Overall height (canopy): approx. 2,200 mm Technical data of the trailer: - Loading area dimensions: 2,600 x 1,530 mm - Permissible gross weight: 2,700 kg - Unladen weight: approx. 534 kg - Payload: approx. 2,166 kg - Overrun brake from KNOTT - Axles incl. braking system from KNOTT - LED marker lights - LED outline lights - Rear lights - Drive-on ramp hot-dip galvanized with support bracket - Bucket support - Non-slip floor incl. lashing eyes for securing loads - Axle loads per axle 1/2: 1,350/1,350 kg - Automatic jockey wheel - Support load 120 kg - V-drawbar Accessory package: - Quick coupler (quick-hitch) - Pre-installed thumb - 800 mm bucket - 200 mm bucket - 380 mm bucket - Grapple for timber, curbstones, manure, etc. - Ripper tooth - Rake - Earth auger, 20 cm diameter - Toolbox In addition to the accessory packages, we also offer a wide range of attachments, which you can find on our website. Please feel free to contact us by phone or email, and we will prepare a customized offer tailored to your needs. As a licensed Berger Kraus and Martz partner, we are your point of contact should you require spare parts or additional attachments, or if you have any further questions or suggestions regarding your new machine. All information provided is without guarantee; errors and changes are reserved.

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, moč: 14,2 kW (19,31 KM), vrsta prenosa: samodejen, vrsta goriva: dizel, barva: rumena, obratovalna teža: 2.640 kg, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, število sedežev: 1, prostornina žlice: 0,05 m³, širina izkopne žlice: 500 mm, Leto izdelave: 2024, obratovalne ure: 2 h, Oprema: dodatne luči, gumene gosenice, hidravlika, hidravlika prijemala, hidravlično kladivo, kabina, nastavljivo podvozje, pogon na vsa štiri kolesa, standardna žlica, The Berger Kraus BK2800ASR with KUBOTA engine is a robust excavator, ideal for foundation, fencing, connection, and gardening work. This excavator features an adjustable undercarriage, swing arm, air conditioning, pre-installed hydraulic quick coupler, and much more. Model BK2800ASR with 3-axle low-bed trailer and small accessory package! Our machines are sold as demonstration units, as loading and unloading for transport, as well as minor test drives, may result in up to a maximum of 5 operating hours on the machines. Highlights: - Hydraulic quick coupler for fast attachment change without leaving the cab - Joystick controls next to the driver's seat - Front windshield opens with gas springs - Kubota engine - Adjustable undercarriage 1130–1360mm - Air conditioning - Swing arm - Italian piston pump Taifeng With every excavator you purchase from us, you receive a CE certificate, an invoice with shown VAT, and an operating/repair manual in German. In addition, we offer financing options for businesses, spare parts sourcing, and excellent service! Of course, we also sell to private individuals! The machine is AVAILABLE IMMEDIATELY! Technical Data – Excavator: - Model: BK2800ASR with cab, swing arm, hydraulic quick coupler, and adjustable undercarriage 1130–1360mm - Brand: Berger Kraus - Operating weight: 2640 kg - Bucket capacity 500mm: 0.05 m³ - Engine: KUBOTA EURO 5 (D1105) 3-cylinder liquid-cooled (diesel) - Rated power: 14.2 kW - Displacement: 1123cc - Main pump: TAIFENG 61.6 L/min - Slew motor: EATON (USA) - Travel motor: Final drive with EATON hydraulic motor Operating range: - Max. digging reach at ground level: approx. 4168 mm - Max. digging depth: approx. 2396 mm - Max. dump height: approx. 3275 mm - Max. unloading height: approx. 2310 mm - Swing arm rotation left: approx. 539 mm - Swing arm rotation right: approx. 439 mm - Max. vertical digging depth: approx. 2096 mm - Minimum swing radius: approx. 1580 mm - Max. blade lift height: approx. 257 mm - Max. blade digging depth: approx. 413 mm - Slew angle: 360° Dimensions: - Transport dimensions (L/W/H): 3918x1454x2469 mm - Adjustable Track Width: 1130–1360 mm - Total track length: 1892 mm - Ground clearance: 535 mm - Shoe width: 230 mm Technical Data – Trailer: - Cargo bed dimensions (LxW): 4000x1820 mm - Permissible total weight: 3500 kg - Unladen weight: approx. 817 kg - Payload: approx. 2683 kg - Overrun brake by Knott - Axles with brake system by Knott - LED marker lights - LED outline marker lights - Access ramp hot-dip galvanized with support bar - Phenolic resin-coated floor with lashing points - Axle loads per axle 1/2/3: 1350/1350/1350 kg - Shock absorbers on all three axles for 100 km/h approval - Drawbar load: 150 kg - Tires: 195/50R13C - Wheel chocks - Support wheel with folding function Accessories: - Pre-installed hydraulic quick coupler - 1000 mm bucket - 200 mm bucket - 500 mm bucket - Grab for wood, curbstones, manure, etc. - Ripper tooth - Rake - Earth auger, 30 cm diameter Hodpfx Acst U Rrqenst - Toolbox Warranty/guarantee according to legal requirements As a licensed Berger Kraus and Martz partner, we are your point of contact if you need spare parts, additional attachments, or have any questions or suggestions regarding your new machine. All information provided without guarantee; errors and changes excepted.

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, moč: 10,2 kW (13,87 KM), vrsta goriva: dizel, barva: rumena, obratovalna teža: 1.200 kg, dvižna višina: 2.610 mm, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, število sedežev: 1, prostornina žlice: 0,026 m³, širina izkopne žlice: 380 mm, Leto izdelave: 2025, obratovalne ure: 2 h, Oprema: dodatne luči, gumene gosenice, hidravlika, hidravlika prijemala, hidravlično kladivo, kabina, nastavljivo podvozje, pogon na vsa štiri kolesa, standardna žlica, zaščita za glavo, We offer you reliable and durably engineered mini excavators with numerous extras and a stylish design. Our package includes: Mini excavator, 2-axle low-loader/trailer, and a comprehensive accessory package! Our machines are sold as demonstration vehicles, as they may have up to 5 operating hours due to loading and unloading for transportation to our site and minor test drives. For every excavator purchased from us, you will receive a CE certificate, an invoice with VAT shown, and an operation/repair manual in German. We also offer financing options for businesses, spare parts procurement, and excellent customer service! Of course, we also sell to private individuals! The boom cylinder mounted from above reduces risk of damage and increases the maximum digging depth to 1.75 m! Technical Data of the Excavator: - Model: BK1250KJSR with cab, swing arm, adjustable undercarriage, and seat-mounted joysticks - Brand: Berger Kraus - Operating weight: 1200kg - Bucket capacity (preinstalled): 0.026 m³ - Bucket width (preinstalled): 380mm - Engine: KUBOTA EURO 5 (D722 / E711), 3-cylinder, liquid-cooled (diesel) - Rated output: 10.2 kW / 2500 rpm - Displacement: 719cc - Main pump: TIANJIN - Hydraulic system pressure: 16MPa - Slew motor: EATON (USA) - Travel motor: ZHENJIANG with overflow function - Travel speed: 1.2 km/h Hsdpfxow Rqx Rj Acnjt Working Ranges: - Digging reach at ground level: approx. 3030mm - Max. digging range: approx. 2940mm - Max. digging depth: approx. 1750mm - Max. dumping height: approx. 2610mm - Max. discharge height: approx. 1740mm - Max. vertical digging depth: approx. 1655mm - Minimum turning radius: approx. 1490mm - Max. bucket lifting height: approx. 345mm - Max. bucket digging depth: approx. 240mm - Slew radius: 360° Dimensions: - Wheelbase: 920mm - Total length of track: 1230mm - Undercarriage width: 896-1100mm (adjustable) - Ground clearance (undercarriage): 132mm - Track width: 180mm - Turning radius: 784mm Technical Data Trailer: - Loading area size: 2600x1530mm - Gross vehicle weight: 2700kg - Unladen weight: approx. 534kg - Payload: approx. 2166kg - Overrun brake by KNOTT - Axles with brake system by KNOTT - LED marker lights - LED outline lights - Rear lights - Hot-dip galvanized loading ramp with support bracket - Bucket rest - Phenolic plywood flooring including lashing points - Axle load per axle 1/2: 1350/1350kg - Automatic jockey wheel - Support load: 120kg - V-Deisel Accessory Package: - Quick coupler (Quick-Hitch) - Hydraulic grading bucket, 800mm wide - Hydraulic breaker - Bucket 200mm - Bucket 380mm - Grapple for timber, kerbstones, manure, etc. - Ripper tooth - Rake - Earth auger, 20cm diameter - Toolbox We also offer a wide range of additional attachments, which you can find on our website. Feel free to contact us by phone or email to receive a tailored offer. As a licensed Berger Kraus and Martz partner, we are your reliable contact for spare parts, additional attachments, or any questions concerning your new machine. All information is provided without guarantee. Errors and changes reserved.

Stanje: novo, lastna masa: 8.490 kg, največja dovoljena obremenitev: 40.510 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.490 kg, Oprema: ABS, Chassis: - Robust welded steel frame structure with front frame drop and flat loading platform with rear bevel, approx. 500x100 mm - Gooseneck height 200 mm with beveled corners - Gooseneck end with bevel approx. 500 x 100 mm (traction ribs on outer frame in the area behind rear bevel) - 2 kingpin positions with interchangeable 2" kingpin - Outer frame closed outwards as slotted rail for lashing with tie-down straps - Reinforced frame design / point load at center of gravity - Provisions for extendable deck wideners - With excavator trough (without cover), approx. 220 mm deep, 600 mm wide, starting after the 2nd axle to end of vehicle - 1 pair wheel recesses in front of the axle with steel covers (covers with Körapur coating), approx. 400 mm deep, plus 1 pair wheel recesses between the 1st and 2nd axle with steel covers - Underride protection = extended end plate - Hydraulic drop-down supports at rear Floor: - 35 mm larch timber floor with aluminum omega profiles Axles, Steering, and Tyres: - BPW air suspension axles, each rated at 10 t axle load, bellows diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lifting and lowering device, total lift approx. 200 mm - 2nd driving height via ball valve +50mm - 1st axle lift axle (wired through EBS), fully automatic actuation with manual emergency actuation via button on trailer - 3rd axle as friction-steered trailing axle with electric and mechanical locking - 12 steel disc wheels, 10-hole, hub-centered - 12 tyres 245/70 R 17.5 143/141J, tubeless - Incl. tyre pressure monitoring system Braking System: - Dual-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Pneumatic connection yellow/red Paintwork: - Steel shot blasting, spray galvanising of chassis and primer - Painting of chassis/wheel hubs/outer frame in DB 7350 Novagrau Accessories: - Removable side and rear boards on the gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum underrun protection - 4 wheel chocks - Steel fenders with Clear-Pass - Long license plate holder in end plate - 1 removable ECE plate at the rear - 11 pairs ZK modules 10t lateral: - 2x on the gooseneck - 9x on the loading platform - Without rear towing eyes - Extendable warning signs including 3 position lamps each, front at landing legs and rear in front of end plate, steplessly extendable up to 4,500 mm load width - 4 insertable sockets for warning signs in stake pockets on loading platform - 6 pairs stake pockets along sides for 100x50 mm stakes - 2 cross rows of stake pockets for 100x50 mm stakes on the gooseneck from outside frame to main frame (1 before and 1 after kingpin positions) - 3 cross rows of stake pockets for 100x50 mm stakes on loading platform from outer frame to main frame (1 in front section, 1 before 1st axle, 1 after 3rd axle) - 2 pairs steel plates on loading platform for container locks to accept 1x 20ft container - Rubber skirt mounted on underrun protection - Preparation (cable routing for NATO cable and hole pattern for subsequent mounting of NATO socket at front of end plate and bracket on vehicle) for optional retrofit of electrohydraulic power unit at right rear for potential operation of access ramps Hjdpjwu A Slefx Acnjt - Mechanical 24-ton stabiliser landing gear with single-sided operation and compensating shaft Optional: Trailer available with aluminum folding ramps.

Stanje: novo, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5 3PMSF, barva: siv, Oprema: ABS, Swan neck: - Swan neck with front corners beveled at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Extendable load area: - Extendable load area with rear chamfer approx. 1,000 mm x 8° - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the load area (LC 10,000 daN) - Cut-outs in the external frame of the load area for attaching lashing straps (LC 2,000 daN) - Approx. 48 mm hardwood flooring, over the axles with checker plate covering Axles and Tires: - BPW axles and suspension, 2 fixed axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated by reverse gear or manually - Air suspension with lifting and lowering valve - Axle tools - 235/75 R 17.5 tires, 3PMSF Braking system: - WABCO braking system as per EU regulations with EBS-E (2S2M) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Accessories included: - One spare wheel with holder in front of the front wall - 2'' king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection rail - 4 wheel chocks with holder at the front wall - Rear light bracket at the rear of the trailer - Mounting points at the rear area of the swan neck for ALU loading ramps - Galvanized folding supports under the chamfer of the load area - Cover plates to bridge the gap between ramps and load area - White reflective tape according to EU standards on the sides, red at the extension and rear - Electro-hydraulic unit at the rear, under the load area - Bracket for warning panels left and right on the swan neck and ramps, including power socket - Ramp control valves mounted on the right-hand side of the trailer - One mud flap at the rear of the trailer - Manual and documentation on USB stick - On the swan neck aluminum side walls and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable (body length approx. 2,560 mm) - Four warning panels extendable by approx. 400 mm, size approx. 423 x 423 mm, with position light - 3 pairs of WADER container pockets in the load area for a 20ft, 30ft, or 40ft container - 6 pairs of stake pockets 100x50 mm in the external frame of the load area - Galvanized extensions, extendable by approx. 230 mm per side - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the chamfered area of the load area - Anti-slip sand layer painted on the checker plate above the king pin and load area - Mounting for beacon on the warning panels - European reflective plates (red-yellow) at the rear of the trailer - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads, including load chart - HRM metallization (High Resistance Metallisation) of the external frame - Complete steel construction shot-blasted, then the defined visible surfaces finished hot-metallized with ZINACOR 850 (zinc 85% - aluminum 15%) Hjdpjuqlmnsfx Acnst

Stanje: novo, lastna masa: 11.000 kg, največja dovoljena obremenitev: 38.500 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Load Area: - Extendable loading area with rear taper approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses fitted with square climbing strips 15 x 15 mm, including lower extensions - Between the 1st and 2nd axle, a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the bevel as well as protruding into the loading area for parking excavator dipper stick approx. 2,900 x 750 x 210/290 mm - 1 pair of lashing rings, installed flat at the front of the load area (LC 10,000 daN) - 5 pairs of folding lashing rings on the outside (LC 5,000 daN) - 2 pairs of folding lashing rings on the outside (LC 10,000 daN) - 2 pairs of lashing rings in the dipper stick recess (LC 5,000 daN) - Cut-outs in the outer frame of the load area for securing straps (LC 2,000 daN) - Incl. three-part removable galvanized covers over the wheel recesses – max. point load 3.5 t / pc. Two-piece Steel Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood surfacing - Ramp with hydraulically folding ramp sections, hydraulic lifting gear, and hydraulically adjustable Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 steering trailing axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually Hodsup U Hzjpfx Acnot - Air suspension with lifting and lowering valve - Axle tool kit - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 141 Accessories Included: - Mounts for warning signs left and right at the gooseneck and at the rear, each with socket - One spare wheel - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings at the galvanized front connector strip - 4 wheel chocks - Galvanized, extendable outriggers approx. 230 mm per side - Galvanized folding supports beneath the loading area bevel - Rear trailer bracket for rotating beacon - Cover plates for bridging the gap between ramps and load area - White reflective tape to EU regulations, sides and on extensions; rear in red - Electro-hydraulic unit installed at the rear beneath the loading area - Ramp control valves mounted on right trailer side - European reflective panels (red-yellow) on rear of trailer - Four extendable warning boards, approx. 423 x 423 mm, with position light - Bracket for rotating beacon on warning boards - Removable ALU side boards and rear board on gooseneck approx. 2,440 x 400 mm - Rear galvanized removable stakes (structure length approx. 2,560 mm) - 2 pairs of WADER container pockets in loading area for 20ft or 30ft container - 3 pairs of socket pockets for stakes 100 x 50 mm in outer frame of loading area - Removable, galvanized intermediate table with 1 pair of WADER container pockets - Square climbing strips 20 x 20 mm spaced every 200 mm on outer frame at loading bevelling - Painted sand layer on chequer plates of the gooseneck and loading area for anti-slip protection - 80 km/h speed stickers rear and both sides - Load manometer for axle load measurement, including load chart.

Stanje: novo, lastna masa: 8.950 kg, največja dovoljena obremenitev: 40.050 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.950 kg, Oprema: ABS, Chassis: - Robust welded steel frame construction with front frame cranking and flat loading area with rear taper approx. 500x100 mm - Neck of frame 200 mm with beveled corners - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in area behind rear taper) - 2 king pin positions with replaceable 2" king pin - Outer frame closed outside as perforated outer frame for lashing with tie-down straps - Reinforced frame design / point load at center of gravity - Prepared for extendable width extensions in the loading area - With excavator trough, depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm and 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Underrun protection = extended end plate - Drop-leg supports at rear Ramps: - 2 pieces, single-part aluminium loading ramps with spring lift system - Dimensions (L x W) approx. 2,500 mm x 600 mm - Can be locked in transport position with tie-down straps - Laterally adjustable by hand Floor: - 35 mm larch wood floor with aluminium omega-profiles Landing Gear: - Mechanical 24 t landing gears with single-sided operation and load compensation Axles, Steering, and Tyres: - BPW air suspension axles, 10 t axle load each, air spring diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lift/lowering device with total travel approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired via EBS), fully automatic confirmation with mechanical emergency operation by push button on trailer - 3rd axle is friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, hub-centered - 12 tyres 245/70 R 17.5 143/141J, tubeless - Incl. tyre pressure monitoring Brake System: - Two-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Air connections yellow / red Paintwork: - Steel shot-blasting, chassis spray galvanising and priming - Chassis / wheel hub / outer frame painted in DB 7350 Novagrau - Plastic parts black, unpainted - Rims: factory silver - Reflective strips on sides and rear in yellow Accessories: - Removable side and rear walls approx. 400 mm high on gooseneck - Spare wheel bracket - Aluminium bump guard - 4 wheel chocks - Sheet metal mudguards with Clear-Pass - Long licence plate holder in end plate - 1 removable ECE board at rear - 11 pairs ZK modules 10 t at sides: - 2x on gooseneck Hodpfx Acewu Agionet - 9x on loading area - Without tow rings at rear - Extendable warning boards incl. 3 position lights each, front at landing gears and rear before end plate, infinitely extendable to loading width 4,500 mm - 4 mounting holders for warning boards plug-in type in stake pockets on loading area - 6 pairs of stake pockets at sides for 100x50 mm plug-in stakes - 2 rows transversely on gooseneck for 100x50 mm plug-in stakes from outer frame to main frame (1x before and 1x after king pin positions) - 3 rows transversely on loading area for 100x50 mm plug-in stakes from outer frame to main frame (1x front section, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks, suitable for 1x 20ft container - Rubber apron fitted on underrun protection

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, moč: 10,2 kW (13,87 KM), vrsta prenosa: samodejen, vrsta goriva: dizel, barva: rumena, lastna masa: 1.150 kg, dvižna višina: 2.610 mm, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, število sedežev: 1, prostornina žlice: 0,026 m³, širina izkopne žlice: 380 mm, Leto izdelave: 2024, obratovalne ure: 2 h, Oprema: dodatne luči, hidravlika, hidravlika prijemala, hidravlično kladivo, kabina, pogon na vsa štiri kolesa, standardna žlica, zaščita za glavo, The BK1250KSR is a solidly constructed mini excavator with cab, designed for fencing, foundation, connection, and landscaping work. Its compact size and simple design make the unit easy to operate and maintain. With every excavator purchased from us, you will receive a CE certificate, an invoice with VAT shown separately, and an operation/repair manual in German. Our machines are sold as demonstration units, as loading and unloading for transport to our facility and minor test drives may result in the machines having up to 5 operating hours. Included in the offer: Mini excavator, 2-axle low-loader/trailer, and a comprehensive accessory package! The mini excavator is AVAILABLE IMMEDIATELY! Excavator Technical Specifications: - Model: BK1250KSR with cab, swing arm, and adjustable undercarriage - Brand: Berger Kraus - Operating weight: 1150 kg - Bucket capacity 380mm: 0.026 m³ - Engine: KUBOTA EURO 5 (D722/E711), 3-cylinder, liquid-cooled (diesel) - Rated output: 10.2 kW/2500 rpm - Displacement: 719 cc - Main pump: TIANJIN gear pump - Hydraulic system pressure: 16 MPa - Slew motor: EATON (USA) - Travel motor: ZHENJIANG, with overflow function - Travel speed: 1.2 km/h Operating ranges: - Ground-level digging reach: approx. 3030 mm - Maximum digging reach: approx. 2940 mm Hodpfsul Adgsx Acnjt - Maximum digging depth: approx. 1750 mm - Maximum dumping height: approx. 2610 mm - Maximum unloading height: approx. 1740 mm - Maximum vertical digging depth: approx. 1655 mm - Minimum turning radius: approx. 1490 mm - Max. blade lift height: 345 mm - Max. blade digging depth: 240 mm Dimensions: - Dimensions: 2870 x 930 x 2285 mm - Track width: 800–930 mm - Overall track length: 1230 mm - Ground clearance: 132 mm - Track width: 180 mm - Turning radius: 784 mm Trailer Technical Specifications: - Loading area dimensions: 2600 x 1530 mm - Permissible gross weight: 2700 kg - Unladen weight: 534 kg - Payload: 2166 kg - Overrun hitch by ALKO - Axles including brake system by ALKO - LED marker lights - LED outline lights - Rear lights - Hot-dip galvanized loading ramp with support bracket - Bucket rest - Screen-printed floor incl. lashing eyes for securing - Axle loads per axle 1/2: 1350/1350 kg - Automatic jockey wheel - Support load: 120 kg - V-Diesel Accessory package: - Quick coupler - 200 mm bucket - 380 mm bucket - 800 mm hydraulic ditch cleaning bucket - Hydraulic breaker - Grapple for wood, kerbstones, manure, etc. - Ripper tooth - Rake - Earth auger, 20 cm diameter - Toolbox As a licensed Berger Kraus and Martz partner, we are your contact for spare parts, additional attachments, and any questions or suggestions regarding your new machine. All information subject to change; errors and omissions excepted.