Müller-Mitteltal 14,4 To Tand- Tiefl Mit 2- Seitenkipper nakup rabljenega (58.868)

Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * KA-TA-RT 18.0: ----Brake: * EBS (Electronic Braking System) * Emergency release for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering device, including Ride-Through-Release (RtR) valve and manual lowering function for loading ----Drawbar / Flanged Drawbar Eye: Njdpjvin Ucefx Ab Dswl * Drawbar with positive-locking height adjustment * 50 mm flanged drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V fitted in underrun protection ----General Attachments: * Support winch at front * Fold-away rear support legs on the outside * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on right side * Plastic quarter mudguards ----Tipping Body: * Steel pallet – 3-way tipper body made of high-tensile fine grain steel with high M-Strong side panels and reinforced 180 bar tipping cylinder * Fixed front wall made of smooth sheet steel * Hardwood strip for excavator bucket screwed onto front wall * Continuous side panels – fold-down without center pillar, with sideboard spring-assist lifters and swinging function via manual central locking * Bolt-on rear stanchions * Combination steel swing doors at rear, 2-leaf, asymmetrically split, able to swing open 270° and lockable (not foldable), including additional swinging frame for automatic rear door opening when tipping; locking by galvanized rotating bar lock and central locking, deactivation function for automatic rear door opening when tipping backwards with opened swing doors * 4 mm steel floor plate * Two-step access on the left front * Rear ramp track for loading ramps ----Load Securing: * One 7 t lashing ring in each corner * Four 3 t lashing eyes recessed in the outer frame on each side ----Loading Ramps: * Recessed ramp compartment at rear of chassis * 1 pair aluminium loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipping platform, underrun protection, and rear supports hot-dip galvanized * Sideboards painted in any desired RAL colour (excluding special or metallic paints), can be changed up to approx. 6 weeks before completion * Axles, air tanks, flanged drawbar eye, and front support winch painted in black ----Info: * --Load securing certificate according to EN 12642 XL? * Errors and intermediate sale reserved ----Delivery Time: * Available from approx. CW 45 / 2026

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic leaf springs with equalizing unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with in-cab display via EBS signal—no in-cab installation required * 15-pin power connector * LED lighting system, 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * External folding rear support legs * Plastic toolbox approx. 858 x 500 x 500 mm, front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Provision in front of the bulkhead for retrofitting container locks * Bolted 400 mm smooth steel bulkhead * Bolted rear stanchions * Side walls with spring assist ----Load Securing: * Perforated outer frame, angled at approx. 45°, with 2 t lashing capacity every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing points * Profifix lashing rail along the centerline for lashing capabilities up to LC 3000 daN ----Ramps: * One-piece hydraulic grating ramps, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump performance in the truck of over 40 l/min up to max. 140 l/min) ----Paintwork: Nwodpforwc R Ajx Ab Dol * Chassis, drawbar, bulkhead, mechanical drop supports, and ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange towing eye painted in a black shade * Side wall paintwork in RAL 9010 pure white * Painting of the side walls in an RAL color of choice available at an extra charge ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images shown ----Delivery time: * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.800 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.370 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 11.9: ----Brakes: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by 300 mm * 40 mm flange towing eye ----General Attachments: * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox, front right outside on the front wall * Side underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: * Platform length 5.37 m * 50 mm softwood floor * Bolted smooth sheet steel front wall * Fold-down side walls made of trapezoidal-profiled steel sheet with board lifting spring * Rear wall made of steel, insertable between the ramp holders for storage in front of the front wall when not in use * Rear stanchions bolted ----Load Securing: * Perforated outer frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm * Installation of 3 t recessed lashing rings every 600 mm possible * In each corner front and rear, 1 x 6.3 t lashing ring * Various holes in front and rear crossmembers for 1.2 t lashing options ----Ramps: * One-piece mechanical grating loading ramps with spring system for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear approach angle approx. 860 mm chassis ----Tyres: Nodel Th Ncepfx Ab Djwl * Tyres 235/75 R 17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, front wall, tailgate, folding supports, loading ramps galvanized * Axles, springs, air tanks, 40 mm flange towing eye painted in black * Board walls painted in RAL2011 deep orange * Side panels available in other RAL colors at extra cost ----Information: * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available ex works Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.800 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.370 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 11.9: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Drawbar height adjustable by 300 mm * 40 mm flange towing eye ----General Attachments: * Jost landing gear front * Rear external folding supports * Plastic toolbox front right, outside on the front wall * Side underrun protection * Plastic quarter mudguards Nwodpfx Abel Th Nre Djl ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: * Loading platform 5.37 m * 50 mm softwood flooring * Bolted front wall made of smooth sheet steel * Side walls made of trapezoidal-profile steel sheet, foldable with drop-side spring assist * Rear wall made of steel, can be slid in between ramp mounts, stored inside in front of the front wall when not in use * Rear stanchions bolted ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross-members for 1.2 t lashing options ----Ramps: * One-piece mechanical mesh loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Rear approach incline approx. 860 mm chassis ----Tyres: * Tyres 235/75 R 17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, front wall, tailgate, folding supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and 40 mm flange towing eye painted in black * Drop-sides painted in RAL2011 deep orange * Painting of the side walls in any RAL colour available at extra cost ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing device ----Drawbar / Flange Hitch Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Fittings: * Landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, fitted front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * 50 mm softwood floor * Provisions in front of the bulkhead for retrofitting container locks * Bolt-on 400 mm bulkhead made of smooth sheet * Removable rear stanchions, bolted * Drop sides with spring assist ----Load securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t retractable lashing rings every 600 mm * 1 x 6.3 t lashing point in each front and rear corner * Various holes in the headboard and rear crossmember for 1.2 t lashing options * Profifix lashing rail centrally positioned along the longitudinal axis for securing up to LC 3000 daN ----Ramps: * One-piece hydraulic mesh drive-on ramps, approx. 2,750 x 600 mm (collapsible to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump output on the truck of over 40 l/min up to max. 140 l/min) ----Painting: * Chassis, drawbar, bulkhead, mechanical drop supports and drive-on ramps hot-dip galvanized * Axles, springs, air reservoirs, landing gear front, and flange hitch eye painted in black shade Nwsdpfxsrwc R Rj Ab Dol * Drop sides painted in RAL 9010 pure white * Painting of the side walls in a RAL color of your choice available at extra charge ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 7.400 kg, skupna masa: 11.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2000, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2000, Oprema: ABS, Številka zaloge: 5884 Približno 5,00 m dolg prikolica Müller-Mitteltal s tandem osmijem in nagibno platformo z zložljivimi rampami ----* Proizvajalec: Müller-Mitteltal * Tip: ETK-TA-S * Prva registracija: 07/2000 * Skupna masa: 11.000 kg * Prazna masa (glede na vozilno kartico): 3.600 kg * Nosilnost: 7.400 kg * Oske: 2 x BPW / bobnaste zavore * Vzmetenje: listnato vzmetenje * Pnevmatike: 235/75 R 17.5, približno 50 % ostale življenjske dobe * Barva: šasi siva, nagibna platforma rdeča * ABS * Dimenzije notranjosti nagibne platforme: približno 5,00 m dolžine x 2,42 m širine, stranske stene 0,40 m visoke * mehanske, dvodelne rampe (2,10 m + 1,30 m = 3,40 m) * jeklena platforma z 4 pari zložljivih pritrdilnih točk * 40 mm vlečna prikolica, nastavljiva po višini * četrtni odbijač na drugi osi Nwodpfxsz A Nwfe Ab Del * nosilec rezervnega kolesa * LED luči za vzvratno vožnjo * 2 x LED delovne luči spredaj * sprednji oporni člen za polno obremenitev * dodatni oporni člen zadaj Nemška prikolica!! Nemška dokumentacija!! Opozorilo na možne napake v oglasu: Kljub skrbni izdelavi oglasa se lahko v besedilu ali podatkih posamezne napake. Ne prevzemamo odgovornosti za napake, spremembe ali medčasne prodaje. Vse informacije so podane brez jamstva. Prosimo, da nas kontaktirate za preverjanje podrobnosti ali za dodatna vprašanja.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 3.600 kg, največja dovoljena obremenitev: 9.900 kg, skupna masa: 13.500 kg, konfiguracija osi: 2 osi, prva registracija: 11/2011, naslednji pregled (TÜV): 09/2027, dolžina tovornega prostora: 6.100 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R 17,5, barva: siv, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2011, Oprema: ABS, Nemški tehnični pregled vozil (KFZ Tüv) – novo Müller Mitteltal, tandem prikolica z nizko nosilno površino, hidravlične rampe Tip: ETUE-TA 13,5 NG Maksimalna dovoljena masa: 13.500 kg Masa praznega vozila: 3.600 kg Maksimalna obremenitev na osi: 9.900 kg Nwsdpfx Asz D T N Ieb Djl z zračnim vzmetenjem, dvojne pnevmatike 205/65 R 17,5 Prijemna priprava za vleko (40 mm) Višina od tal: 88 cm

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assemblies ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, approx. 300 mm * 40 mm flange drawbar eye ----General Attachments: * Jost mechanical landing gear, front * External, hot-dip galvanized folding supports, rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted on front wall outside ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 15-pin power connector * LED tail lights ----Loading Platform: * 50 mm softwood floor * 20'' container locks mounted at front and rear * Bolted smooth steel front wall * Drop sides, steel, trapezoidal profile, drop-down with drop-side lifting springs * Hot-dip galvanized, bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing brackets every 600 mm (5 lashing rings fitted each side) * 1 x 6.3 t lashing ring fitted in each corner front and rear * Various holes in front and rear transverse beams for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear storage compartment integrated in the chassis below the loading area ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Drop side color in RAL 9010 pure white * Side panels can be painted in a RAL color at extra cost ----Info: * New vehicle without registration Nsdpfx Ael Thy Reb Dowl * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 12.200 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * TM-TA 14.4: ----Brakes: * Wabco EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable, hot-dip galvanized drawbar +/- 150 mm * 40 mm flange towing eye ----Electrics / Lighting: * 15-pin power connector * LED tail lights * RDÜ tyre pressure monitoring system ----General Attachments: * Jost support winch at the front * 2 x external drop-down supports at the rear * Closed single plastic mudguards * Folding A-board at the rear * Plastic underride guard buffer * Hot-dip galvanized approach protection with integrated chain storage box, W = 370 mm x D = 420 mm x H = 480 mm, at the front left & right ----Load Securing: * Each side with 2 x 5.3 t UVV lashing rings for attaching tensioning elements ----Trough Stops: * 2 removable trough stops for lateral centering of the troughs * Front trough stops pluggable in 4 positions with swivel-mounted stop ----Painting: * Hot-dip galvanized chassis Nsdel Thyqjpfx Ab Djwl * Axles, springs, air tanks and support winch painted in black ----Information: * Errors and prior sale excepted * New vehicle with manufacturer's warranty ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 14.400 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-ER 19.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering device ----Drawbar / Flange Towing Eye: * Drawbar with 50 mm flange towing eye, height-adjustable by 110 mm via offset plate ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * LED tail lights 12/24 Volt ----General Attachments: * Jost landing leg at the front * External folding support legs at the rear Nwjdpfemi Tmaex Ab Dsl * Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side * Side underrun protection * Plastic quarter mudguards ----Low-loader Platform: * Reinforcement package on chassis for drilling rig transport * 50 mm softwood floor, clamped type * Preparation in front of front wall for retrofitting container locks * Bolted smooth plate front wall * Split steel side walls – trapezoidal profile – foldable with central folding stanchion * Steel rear wall slide-in between ramps – bracket for storage in front wall when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45-degree angled, with 2 t lashing force every 480 mm * Option for installation of 3 t drop lashing rings every 600 mm * Lashing package: 1 x 10 t UVV lashing ring in each front and rear corner, 2 x 8 t UVV retractable lashing rings each side in the outer frame, various holes for 1.2 t lashing options in the front and rear crossmembers ----Ramps: * One-piece slide-in ramps 12 t/pair, ramps approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm ----Loading Height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ----Tyres / Wheelbase: * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, rear flap, folding supports and access ramps hot-dip galvanized * ---Axles, air tanks, flange towing eye and landing leg painted in a shade of black--- * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 03/2004, Leto izdelave: 2004, Oprema: ABS, = Additional options and equipment = - Electronic Braking System (EBS) = Notes = Müller-Mitteltal RAK German vehicle Roll-off trailer 2-axle Air suspension ABS Tyres 60% ID no. 709 We look forward to advising you, signing contracts, or handing over the vehicle at our dealership. Please make an appointment. If you are unable to visit our showroom, we offer complete processing by phone, email, WhatsApp, or fax. On request, we deliver your new vehicle directly to your door. This means you get the best price as well as maximum safety and convenience with your purchase. We are happy to take your used vehicle as a trade-in. We offer you the option of a digital vehicle appraisal based on your vehicle photos, even without visiting the dealership. Our specialised purchasing team offers you a guaranteed top price. Upon request, we deliver your new ‘used’ vehicle nationwide directly to your doorstep and take your trade-in back with us. Financing – leasing Immediate approval and settlement of existing loans. Your specialist partner for passenger cars, vans, commercial vehicles, and construction machinery. Nwedpfsxyx Hajx Ab Dol ITC GmbH & Co KG Siemensstraße 7 32312 Lübbecke (industrial area) Over 400 vehicles in stock at all times. The information given in advertisements, on the internet, on price labels, and in pictures are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing or data transmission errors. Listed equipment may need to be checked separately by the buyer. Offer is generally without new TÜV approval; we will gladly provide you with an offer from our partner workshop. Subject to errors and prior sale. = Further information = Unladen weight: 4,850 kg Payload: 13,150 kg Gross vehicle weight: 18,000 kg

Stanje: novo, največja dovoljena obremenitev: 15.970 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, ETÜ-TA-R 21,0: ----Zavore: * Wabco EBS-E (električni zavorni sistem) * Sistem za izpust zavor v sili za cilindrične zavorne čeljusti * Bobnaste zavore ----Os: * 2 x 11 ton Gigant osi ----Vzmetenje: * Zračno vzmetenje z dvižnim in spuščanjem ----Vlečna palica / prirobnična vlečna palica: * Vlečna palica s 50 mm prirobnično vlečno palico in nastavljiva vlečna palica po višini ----Osvetlitev / električna napeljava: * 15-polni električni vtič * LED luči 12/24 V * Sistem za nadzor tlaka v pnevmatikah (TPMS) ----Splošni dodatni deli: * Sprednja opora Jost * Zunanje zložljive opore zadaj * Plastična orodjarna škatla, približno 750 x 350 x 300 mm, nameščena na desni strani * Stranska zaščita * Plastični stranski blatniki ----Površina za tovor: * Pred sprednjo steno in zadnjim naklonom, priprava za naknadno namestitev zaklepov za pritrditev 20-palčnih kontejnerjev * Izvedba 21 ton celotne mase z ojačanim okvirjem in ojačanimi osmi Nwedeq Dyu Uepfx Ab Djl * Paket za ojačitev za prevoz vrtalne naprave na šasiji * 50 mm iglasto-lesena talna obloga v vkleščeni izvedbi * Pred sprednjo steno priprava za naknadno namestitev zaklepov za pritrditev * Vijična sprednja stena iz gladke pločevine * Razdeljene stranske stene iz jeklene pločevine - trapezno profilirane - z možnostjo zlaganja s sredinskim zložljivim mehanizmom * Jeklena zadnja stena, ki se lahko potisne med rampami - držalo, ko ni v uporabi, na notranji strani pred sprednjo steno * Vijične zadnje stranske letve ----Pritrditev tovora: * Odprt zunanji okvir, približno 45 stopinj upognjen, z 2 tonami vlečne sile na vsakih 480 mm * Možnost vgradnje 3 ton varnostnih zank na vsakih 600 mm * Profifix pritrdilna letva na vzdolžni osi, na sredini, za možnost pritrditve do LC 3000 daN * Na vogalih, spredaj in zadaj, po 1 x 10 ton pritrdilne točke * Paket Lasi z 2 x 8 ton pritrdilnih točk na vsaki strani, potopljenih v zunanji okvir, v sprednji in zadnji nosilec različne vrtine za možnost pritrditve 1,2 tone ----Rampe: * Enodelna mehanična rešetasta ramapa z vzmetnim mehanizmom za delovanje z eno osebo, približno 3.000 x 620 mm (možnost potiskanja skupaj do 20 mm) * Naklon spredaj, približno 860 mm, šasija ----Višina nakladanja: * prazna približno 940 mm * natovorjena približno 910 mm ----Medosje / pnevmatike: * 1.810 mm * Pnevmatike: 235/75R17.5 ----Barvanje: * Barvanje stranskih sten v RAL 9010, čista bela barva * Vlečna palica, sprednja stena, zadnja vrata, zložljive opore in rampe pocinkane * Os, vzmeti, zračni rezervoar in opora pobarvane v črni barvi ----Informacije: * Novo vozilo z garancijo proizvajalca * Napake in vmesna prodaja rezervirani ----Dobavni rok: * Na voljo takoj, Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.360 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 14.4: ----Braking System: * Electronic Braking System (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Towing Eye: * Drawbar height-adjustable by 300 mm * 40 mm flange towing eye ----Electrics / Lighting: * TPMS (tire pressure monitoring system with indicator function in the truck via EBS signal—no installation required on the truck side) * LED lighting system * 15-pin electrical connector ----General Accessories: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox mounted front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood floorboards * Preparation for subsequent installation of 20" container locks at front and rear * Bolted, smooth sheet metal front wall * Side walls made of trapezoidal-profiled steel, foldable with drop-side spring assist * Hot-dip galvanized bolt-on rear stanchions ----Load Securing: * Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing points every 480 mm * Option for 3 t folding lashing brackets every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in front and end crossmembers for 1.2 t securing points ----Ramps: Nsdpendpn Sefx Ab Dewl * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles, stored in a compartment underneath the loading area in the chassis, accessible from the rear ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Entire vehicle hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex works Egestorf

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Take advantage of this opportunity and secure a robust steel swap body (7.45 m). We deliver 2 units free to your door, set up on legs. Perfectly suited for transport and storage applications. Only the roller shutter shows minor defects – your chance for unbeatable value for money! Technical specifications: External dimensions: - Length: 7.45 m - Height: 2.7 m - Width: 2.55 m Internal dimensions: - Length: 7.29 m - Height: 2.45 m - Width: 2.46 m Roller door opening: - Width: 2.38 m - Height: 2.34 m Additional specifications: - Own weight: 3.05 t - Perm. total weight: approx. 16 t - Loading volume: 46 m³ Your key advantages at a glance: ✅ Ready for immediate use – Stable positioning on support legs, no crane required ✅ Versatile – Ideal for transport and storage processes Nwsdpfszn N H Hox Ab Dsl ✅ Durable quality – Robust steel construction for long-term use Also available in other cities! Ask for your desired region! Nationwide delivery across Germany – Fast & hassle-free! Our transport service delivers your swap body directly to you. Simply inquire and have it delivered conveniently! Act now and benefit! Don’t miss out on this opportunity! Of course, we also offer discounts for bulk orders. Don’t let this chance pass you by – your solution for transport and storage is waiting for you!

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 04/2005, barva: črn, Leto izdelave: 2005, Oprema: ABS, = Dodatne možnosti in dodatna oprema = - Rezervno kolo - Centralno podmazovanje - Dvojni pnevmatiki = Opombe = Müller Mitteltal, dvovosni priklopnik T5 2AL s platformo in rampo Zračna vzmetitev BPW osi ABS ZSA Pnevmatike: 60 % GR 235R17,5 IDNR 665 Z veseljem vas pričakujemo za posvet, podpis pogodbe ali prevzem vozila v našem avtosalonu. Prosimo, dogovorite se za termin. Če se ne morete osebno obiskati našega avtosalona, vam ponujamo celoten postopek prek telefona/e-pošte/WhatsApp/faksa. Po želji vam dostavimo novo vozilo neposredno do vaših vrat. To pomeni najboljšo ceno, maksimalno varnost in udobje pri nakupu avtomobila. Prevzem starega vozila Zelo radi sprejmemo vaše rabljeno vozilo v račun. Ponujamo možnost digitalne ocene vozila na podlagi fotografij vašega vozila, tudi brez obiska avtosalona. Nodpfx Ajxw T Uasb Dewl Naša specializirana ekipa za odkup vam ponuja zagotovljeno najvišjo ceno. Po želji vam dostavimo vaše novo rabljeno vozilo po vsej Nemčiji neposredno do vaših vrat in prevzamemo vaše rabljeno vozilo. Financiranje – lizing Takojšnja potrditev in prevzem obstoječega kredita. Vaš specializirani partner za osebna vozila, kombije, gospodarska vozila in gradbene stroje. ITC Gmbh & Co KG Siemensstaße: 7 32312 Lübbecke (industrijsko območje) Obiščite nas na naši spletni strani: Vedno več kot 400 vozil na zalogi. Podatki v oglasih, na internetu, cenovnih tablicah in fotografijah so nezavezujoči opisi in ne predstavljajo zagotovljenih lastnosti. Prodajalec ne prevzema odgovornosti/garancije za tipkarske in prenosne napake. Izpostavljena oprema mora kupec po potrebi dodatno preveriti. Naša ponudba običajno ne vključuje novega tehničnega pregleda, vendar vam z veseljem pripravimo ponudbo naše partnerske delavnice. Pridržana napaka in možnost predčasne prodaje. = Dodatne informacije = Lastna teža: 8.900 kg Nosilnost: 26.100 kg Največja dovoljena masa: 35.000 kg Prodajna cena: 16.999 €, 19.740 US$

Stanje: novo, največja dovoljena obremenitev: 10.360 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic Brake System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lift and lower facility ----Drawbar / Flange Eye: * Drawbar height adjustable by approx. 300 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with in-cab display via EBS signal; no truck-side installation required) * LED lighting system * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Plastic toolbox, front right, mounted outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Provision for retrofitting 20" container locks at front and rear * Bolted bulkhead made of smooth sheet steel * Fold-down side walls, trapezoidal profile, with drop-side spring assists * Bolted, hot-dip galvanized rear stanchions ----Load Securing: * Outer frame with holes, approx. 45° angled, 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * Each of the front and rear corners fitted with 1 x 6.3 t lashing ring * Various holes in front and rear cross members for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for pneumatic and tracked vehicles; stowed at the rear in a compartment integrated below the deck in the chassis ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Vehicle fully hot-dip galvanized Nedjpk D Dqopfx Ab Djwl ----Information: * New vehicle with manufacturer’s warranty * Subject to error and prior sale ----Delivery Time: * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 11.9: ----Zavore: * Zavorna sistema EBS * Naprava za izpust zavor v primeru izrednih razmer za cilindr z vzmetjo * Bobnaste zavore ----Osi: * 2 x 5,5 t BPW osi ----Vzmetenje: * Parabolične vzmeti z izravnalnim mehanizmom ----Vlečna priprava / priključna plošča: * Vlečna priprava, nastavljiva po višini za 300 mm * 40-milimetrska priključna plošča ----Splošni dodatni deli: Nwedoq Ra D Eopfx Ab Djl * Sprednja opora Jost * Zunanje, vroče pocinkane, zložljive opore zadaj * Plastični blatniki * Plastična orodjarna škatla spredaj desno na čelni steni ----Elektrika / osvetlitev: * Sistem za nadzor tlaka v pnevmatikah (RDÜ) * LED-osvetlitev ----Nosilna površina: * Nosilna površina 6,27 m * Primerna za transport kontejnerjev * 50-milimetrski pod iz iglastih plošč * Pred čelno steno je nameščen priključek za poznejšo montažo zaklepov za kontejnerje * Vijolična čelna stena iz gladkih pločevin * Stranske stene iz jeklenih pločevin, trapezno profilirane, z možnostjo zlaganja z vzmetmi za podpiranje * Jeklena zadnja stena, ki se lahko potisne med držala za nakladalno ploščad, ko ni v uporabi, je nameščena notri pred čelno steno * Zadnji nosilci, vijeni ----Pripomočki za pritrditev tovora: * Zunanji okvir z luknjami, oblikovan pod kotom približno 45 stopinj, s silo vlečenja 2 t na vsakih 480 mm * Možna je vgradnja 3-tonskih kljuke za pritrditev tovora na vsakih 600 mm * V kotih spredaj in zadaj po 1 x 6,3-tonska kljuka za pritrditev tovora * Na čelni in končni nosilni nosilci različne luknje za pritrditev tovora s silo 1,2 t ----Nakladalne rampe: * Enodelne, mehanične nakladalne rampe z vzmetmi za delovanje z eno osebo, približno 2.750 x 600 mm (lahko se združijo do 20 mm) * Nakladalni nagib zadaj približno 860 mm ----Pnevmatike: * Pnevmatike: 235/75R17.5 ----Medosna razdalja: * Medosna razdalja: 990 mm ----Barvanje: * Vroče pocinkano podvozje, vlečna priprava, čelna stena, zadnja stena, zadnji nosilci in nakladalne rampe * Barvanje stranskih sten v barvi RAL 9010, čista bela * Barvanje stranskih sten v drugi barvi RAL je mogoče, vendar za doplačilo ----Informacije: * Pridržujemo si pravico do sprememb in napak * Novo vozilo z garancijo proizvajalca ----Dobavni rok: * Na voljo takoj iz Egestorfa

Stanje: rabljeno, največja dovoljena obremenitev: 23.900 kg, skupna masa: 31.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2007, Leto izdelave: 2007, Notranja št. vozila: G400178 Na voljo takoj na našem dvorišču v Kaufungenu Nwedezahg Dspfx Ab Dol VEČ INFORMACIJ: Luis Lucena Viktoria Sologubova NEMŠČINA Müller-Mitteltal TS2 KOMPAKT prikolica za težke tovornjak ? 2 osi ? hidravlične rampe Robustna prikolica Müller-Mitteltal TS2 KOMPAKT, izdelana leta 2007. Prikolica z 2 osmi ima hidravlične rampe, zračno vzmetenje in nosilnost 23.900 kg. Z dovoljeno skupno maso 31.000 kg je še posebej primerna za transport težkih gradbenih in delovnih strojev. Tehnični podatki: * Št. vozila: G400178 * Stanje vozila: Rabljeno vozilo * Kategorija: Prikolica za težke tovornjak * Proizvajalec: Müller-Mitteltal * Model: TS2 KOMPAKT * Prva registracija: 06/2007 * Letnik: 2007 * Osi: 2 * Dovoljena skupna masa: 31.000 kg * Lastna teža: 7.100 kg * Nosilnost: 23.900 kg * Skupna dolžina: 10.800 mm * Nemško vozilo Oprema: * Hidravlične rampe * Zračno vzmetenje * Dvooksna šasija * Robustna konstrukcija prikolice za težke tovornjak Ogled in preizkus delovanja je možen po predhodnem dogovoru. Dodatne informacije, fotografije in videoposnetke lahko dobite na zahtevo. Pridržujemo si pravico do sprememb, napak in predhodne prodaje. ANGLEŠČINA Müller-Mitteltal TS2 KOMPAKT low-loader trailer – 2 osi – hidravlične rampe Robustna prikolica Müller-Mitteltal TS2 KOMPAKT, izdelana leta 2007. Ta dvooksna prikolica je opremljena s hidravličnimi rampami za nakladanje, zračnim vzmetenjem in nosilnostjo 23.900 kg. Z dovoljeno skupno maso 31.000 kg je še posebej primerna za transport težkih gradbenih in delovnih strojev. Tehnične specifikacije: * Referenčna številka: G400178 * Stanje: Rabljeno * Kategorija: Prikolica za težke tovornjak * Proizvajalec: Müller-Mitteltal * Model: TS2 KOMPAKT * Prva registracija: 06/2007 * Leto izdelave: 2007 * Osi: 2 * Dovoljena skupna masa: 31.000 kg * Lastna teža: 7.100 kg * Nosilnost: 23.900 kg * Skupna dolžina: 10.800 mm * Nemška prikolica Oprema: * Hidravlične rampe za nakladanje * Zračno vzmetenje * Dvooksna šasija * Robustna konstrukcija prikolice za težke tovornjak Ogled in preizkus delovanja sta možna po predhodnem dogovoru. Dodatne informacije, fotografije in videoposnetke lahko dobite na zahtevo. Pridržujemo si pravico do sprememb, napak in predhodne prodaje. Pridržana pravica do sprememb. Z veseljem sprejmemo vaše rabljeno vozilo v plačilo. Financiranje je mogoče neposredno pri nas. GOLEC NUTZFAHRZEUGE GMBH Govorimo: nemško, angleško, špansko, poljsko, ukrajinsko, rusko, bolgarsko.

Stanje: rabljeno, prevoženi kilometri: 1.100 km, vrsta prenosa: drugo, barva: rumena, skupna masa: 32.000 kg, lastna masa: 6.210 kg, največja dovoljena obremenitev: 25.790 kg, velikost pnevmatike: 425/65R22.5, prva registracija: 06/2012, vzmetenje: zrak, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 2 axles, air suspension, first axle liftable, ABS (anti-lock braking system), side under-run protection Nwedpfx Abji Rk Epe Dsl Body: LIEBHERR concrete mixer type HTM 1004, approx. 10 m³, 2x BPW axles, disc brakes, first axle liftable! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Leto izdelave: 2022, stanje: rabljeno, For enquiries about the attachment, Mr. Herden will be happy to assist you (by phone at ...). Magni jib with winch JW2000 / 2 tonnes / suitable for RTH & TH series / Year of manufacture: 2022 / DEMO unit / in stock & immediately available Price: €6,990.00 net / €8,318.10 gross - Max. load capacity: 2,000 kg - Length: 2,390 mm - Rope diameter: 10 mm - Working rope length: 25,000 mm - Rope lowering speed: 24 m/min - Automatic attachment recognition: yes - Lattice boom with integrated cable winch - Lattice boom construction made of tube profiles for optimal weight/performance ratio - Cable winch with pressure roller and hydraulic end stop for rope winding/unwinding This attachment is suitable for the RTH and TH series. Product code: ATT-04-015 We have many other Magni attachments in stock and available for immediate delivery! Mr. Herden (Tel. ...) will be happy to assist you. Financing offers are available on request. We are an official Magni telehandler sales and service partner. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. Nwedpfx Aszb Ugmjb Dol We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Furthermore, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We offer you the complete Magni range! Errors and prior sale excepted! Internal ID: 019995 = Further information = New: No Intended use: Construction Please contact Marius Herden for further information.

Stanje: novo, največja dovoljena obremenitev: 14.550 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2024, ETÜ-TA-R 19.0 ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar / Towing Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Electrics / Lighting: * TPMS (tyre pressure monitoring system) * 15-pin power connector * LED tail lights ----General Attachments: * Jost landing gear at the front * Outward folding rear supports * Tool box made of galvanized steel sheet, approx. 650 x 350 x 320 mm, mounted on the right side (powder-coated black) * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Reinforcement package for drill rig transport on the chassis – loading height +20 mm * 50 mm softwood floor, clamped design * Preparation in front of the front wall for subsequent installation of container locks * Bolted smooth steel front wall * Fold-down trapezoidal-profile steel side walls with board-lift assist * Steel rear wall, slidable between ramps – storage bracket for unused position inside, in front of the headboard * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * Front and rear corners each fitted with 1 x 10 t lashing ring; multiple holes for 1.2 t lashing options in front and rear crossmembers ----Ramps: * One-piece, mechanical grate ramps with spring system for single-person operation, approx. 2,750 x 620 mm (retractable to 20 mm gap) * Rear access angle approx. 860 mm ----Tyres: * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, tailgate, rear folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks and landing gear painted in a shade of black * Sideboard painting in RAL 9010 pure white * Painting of side walls in an individual RAL color available at extra charge ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved ----Delivery time: Nwjdpfepk D D Hox Ab Del * Immediately available from Egestorf

Stanje: rabljeno, prva registracija: 11/2006, Leto izdelave: 2006, MÜLLER - MITTELTAL T4 Kompakt Vrtljiva prikolica - Nizkopodna prikolica z zračno vzmetenimi in jamskimi kolesi - 4 x zračno vzmetene GIGANT - osi - zračno vzmetenje - 4 x kolesne jame - mehanske nakladalne rampe - 2 zadnja podporna noga, zložljiva - izvlečne opozorilne table - ABS - MICHELIN pnevmatike: 235/75 R 17.5 - težka izvedba: 40.000 kg skupne mase - lastna teža: 8.400 kg - skupna dolžina: 11.750 mm - vlečna zanka: 50 mm Nwsdpswmpbdjfx Ab Djl Posebej primerna za prevoz strojev za rezanje apna! - nemška prikolica - Tehnični pregled / tehnični preizkus možen na zahtevo in za doplačilo! Pridržujemo si pravico do napak in vmesne prodaje!

Stanje: novo, največja dovoljena obremenitev: 14.550 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2024, ETÜ-TA-R 19.0 ---- Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ---- Axles: * 2 x 11 t Gigant axles ---- Suspension: * Air suspension with manual lowering at the rear ---- Drawbar / Flange Towing Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ---- Electrics / Lighting: * Tire Pressure Monitoring System (TPMS) * 15-pin power connector * LED tail lights ---- General Attachments: * Jost landing leg at the front * External folding support legs at the rear * Toolbox made of galvanized sheet steel approx. 650 x 350 x 320 mm, fitted on the right side (black powder-coated) * Side underride protection * Plastic quarter mudguards ---- Low Loader Platform: * Reinforcement package for drilling rig transport on the chassis – loading height +20 mm * 50 mm softwood floor in clamped design * Provision in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Side walls made of trapezoidal-profiled steel sheet, foldable with board wall spring-assisted lifter * Steel rear wall, can be inserted between the ramps – storage bracket in front of the bulkhead when not in use * Rear stakes bolted ---- Load Securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible Njdjpk D Ncjpfx Ab Dswl * Each front and rear corner with 1 x 10 t lashing ring; various holes in the headboard and end cross member for 1.2 t lashing options ---- Ramps: * One-piece mechanical steel grating ramps with spring assistance for one-man operation, approx. 2,750 x 620 mm (can be retracted to 20 mm) * Rear access slope approx. 860 mm ---- Tyres: * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 ---- Painting: * Chassis, drawbar, headboard, tailgate, rear folding supports, and ramps hot-dip galvanized * Axles, springs, air reservoirs, and landing leg painted in black * Side boards painted in RAL 9010 pure white * Side walls can be painted in any RAL color for a surcharge ---- Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ---- Delivery time: * Immediately available from Egestorf

Stanje: rabljeno, lastna masa: 8.680 kg, največja dovoljena obremenitev: 31.320 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, prva registracija: 09/2018, vzmetenje: drugo, velikost pnevmatike: 235/75R17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5, velikost zadnje pnevmatike: 235/75R17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Privezne ušesca, ABS, razširitev z opozorilnimi tablami, vozilo se prodaja po naročilu., -- Pridržujemo si pravico do tiskarskih napak, sprememb in napačnih podatkov, vzorčne slike --, Več podatkov na: !, More Details: ! Nwedpfx Asz E Ec Aeb Dsl

Stanje: rabljeno, prevoženi kilometri: 883.000 km, moč: 353 kW (479,95 KM), prva registracija: 05/2017, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, zavore: retarder, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, parkirni grelec, Zelo lepo vozilo MAN s spremenljivim podvozjem; možnost nastavitve zaklepnih mehanizmov omogoča tudi vožnjo pod višjimi mostovi. Opremljeno je s klimatsko napravo Dometic za uporabo med postanki. Je vozilo z nizko konstrukcijo, vozi se zelo dobro in je dobro vzdrževano. Nwedpfsz Drw Dox Ab Dol