Goldhofer Polpriklopnik Z Nizkim Nakladalnikom nakup rabljenega (27.703)

Stanje: rabljeno, največja dovoljena obremenitev: 75.700 kg, skupna masa: 93.200 kg, konfiguracija osi: 3 osi, prva registracija: 06/2008, dolžina tovornega prostora: 8.700 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 885 mm, velikost pnevmatike: 245/70 R17.5, barva: bež, Leto izdelave: 2008, Gooseneck, rigid, in central beam design: - Loading area: 3,700 mm x 2,480 mm - Beveled 10°, front corners 45° (1,080 mm long, 190 mm high bevel at the end of the gooseneck) - Closed outer frame - Max. fifth wheel load: 26,000 kg - Swing radius: 2,700 mm - 2" kingpin - Wooden floor - Hydraulically operated landing legs - One-piece aluminum drop sides, 400 mm high, closed on 3 sides including rear tailboard, stakes foldable and removable - 2 pairs of lashing points LC 8,000 daN Loading area: - Single telescoping, continuous over chassis - External/internal tube construction with 1,090 mm fixed loading platform section at front - (L x W): 8,700 mm x 2,550 mm, extendable by 6,700 mm to max. 15,400 mm - Steel floor covering - Locking of extension stages via spring-loaded cylinders and conical bolts - Vehicle optimized for maximum extension - 7 pairs of lashing points LC 13,000 daN - 6 pairs of lashing points LC 6,000 daN - 6 pairs of stake pockets 100 x 50 mm (LC 2,000 daN) 6-axle running gear: - 1 rigid axle, 5 forced-steering axles - Axle brand: SAF - Chassis width: 2,550 mm - 1st axle: load-dependent lift axle - 2nd axle: manually liftable (not load-dependent) - Wheelbase, starting from first axle: 1,310 mm - Twin tires 245/70 R 17.5 - Air suspension, 200 mm lift - Ride height: 885 mm +100 mm / -100 mm - 2nd ride height: 845 mm +140 mm / -60 mm - Floor covering: steel / wood Vehicle rear: - "Beveled" design (600 mm long, 10° bevel) - 1,000 mm overhang from center of last axle - Ramp eye detachable at the rear cross member - Mechanical support for stowage during loading - 1 pair of lashing points LC 6,000 daN - 1 pair of lashing points LC 13,000 daN Loading ramps: - Two-piece loading ramps, length 2,850 mm + 1,540 mm, width 720 mm - Hydraulic ramp lifting mechanism - SuperGrip rubber surface - Climbing strips on outside of ramps 20 mm x 20 mm x 100 mm - Laterally adjustable by hydraulic cylinder to maximum external width of 2,790 mm or minimum internal spacing of 480 mm - Integrated mechanical lock in ram lift cylinder for securing in transport position - Mounting bracket for beacon light Hydraulics: - Hydraulic coupling for tractor unit (1 set), connectors for tractor, hydraulic pump on tractor unit with maximum 60 l/min delivery rate - Hydraulic hand emergency pump - Electric-hydraulic power pack Nsdpfjxp U Tzsx Aibsla Rear steering: - Rear steering bottle for manual steering of trailer axles by cable remote control, spiral cable extendable from 1.5 m to 5 m Accessories included: - Spare wheel holder at front of gooseneck, pluggable, galvanized - Mounting bracket for stakes on gooseneck - 2 pairs warning signs, approx. 423 mm x 423 mm - Widening kit incl. widening beams, hook-on widening element at vehicle rear - 1 pair wheel chocks incl. holder - 1 spare wheel - Central lubrication system with 2 grease pumps - Single-color paint finish in RAL-1001 beige

Stanje: novo, lastna masa: 9.400 kg, največja dovoljena obremenitev: 39.600 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 9.400 kg, Oprema: ABS, Chassis: - Robust welded steel frame construction with a front frame depression and flat loading platform, rear taper approx. 500x100 mm - Gooseneck height 200 mm with beveled corners at the front - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear bevel) - 2 king pin positions with replaceable 2" king pin - Outer frame closed outward, punch-hole design - Loading platform with extendable central frame, can be extended approx. 2,000 mm in increments of 500 mm, pneumatically lockable - Step 80x80 mm in the frame before and after the division Nlsdsxnym Djpfx Aibsa - Reinforced frame version / point load in retracted position at center of gravity - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle to vehicle end - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection = extended rear plate - Drop leg supports at the rear Ramps: - 2 single-piece aluminum ramps, special version with spring-assisted lifting - Length x width approx. 2,500 mm x 600 mm - Lockable in transit position with lashing straps - Manually adjustable sideways Axles, Steering and Tyres: - BPW air suspension axles, each with 10 t axle load, airbag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lifting and lowering device with a total lift of approx. 200 mm - 2nd ride height via ball valve +50 mm - 1st axle as lift axle (wired via EBS), fully automatic activation with manual emergency actuation via button on semi-trailer - 3rd axle as self-steering trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center-offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Tyre pressure monitoring included Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gear: - Mechanical 24 t landing gear with single-side operation and compensating support Paintwork: - Steel grit-blasted, spray-galvanized chassis and primed - Chassis/wheel hubs/outer frame painted in DB 7350 Novagrey - Reflective side and rear stripes in yellow Accessories: - Plug-in side and rear panels on gooseneck, approx. 400 mm high - Spare wheel holder - Lateral aluminum underrun protection - 4 chocks with holders - Elongated license plate holder in rear plate - 1 ECE panel at the rear, plug-in - 11 pairs ZK modules 10t, side-mounted: - 2x on gooseneck - 2x on loading platform before extension - 7x after extension - Extendable warning signs incl. 3 position lights each, at front landing gear and before rear plate, infinitely extendable up to load width 4,500 mm - 4 holders for warning signs, plug-in to stake pockets on loading platform - 6 pairs of lateral stake pockets for 100x50 mm plug-in stakes - 2 cross rows of stake pockets for 100x50 mm plug-in stakes on gooseneck from outer frame inwards to main frame (1x before and 1x after king pin positions) - 3 cross rows of stake pockets for 100x50 mm plug-in stakes on loading platform from outer frame inwards to main frame (1x before extension, 1x after extension and 1x after 3rd axle) - 2 pairs of steel plates in loading platform for container locks to accommodate 1x 20ft container - Rubber apron mounted to underrun protection

Stanje: novo, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5 3PMSF, barva: siv, Oprema: ABS, Swan neck: - Swan neck with front corners beveled at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Extendable load area: - Extendable load area with rear chamfer approx. 1,000 mm x 8° - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the load area (LC 10,000 daN) - Cut-outs in the external frame of the load area for attaching lashing straps (LC 2,000 daN) - Approx. 48 mm hardwood flooring, over the axles with checker plate covering Axles and Tires: - BPW axles and suspension, 2 fixed axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated by reverse gear or manually - Air suspension with lifting and lowering valve - Axle tools - 235/75 R 17.5 tires, 3PMSF Braking system: - WABCO braking system as per EU regulations with EBS-E (2S2M) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Accessories included: - One spare wheel with holder in front of the front wall - 2'' king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection rail - 4 wheel chocks with holder at the front wall - Rear light bracket at the rear of the trailer - Mounting points at the rear area of the swan neck for ALU loading ramps - Galvanized folding supports under the chamfer of the load area - Cover plates to bridge the gap between ramps and load area - White reflective tape according to EU standards on the sides, red at the extension and rear - Electro-hydraulic unit at the rear, under the load area - Bracket for warning panels left and right on the swan neck and ramps, including power socket - Ramp control valves mounted on the right-hand side of the trailer - One mud flap at the rear of the trailer - Manual and documentation on USB stick - On the swan neck aluminum side walls and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable (body length approx. 2,560 mm) - Four warning panels extendable by approx. 400 mm, size approx. 423 x 423 mm, with position light - 3 pairs of WADER container pockets in the load area for a 20ft, 30ft, or 40ft container - 6 pairs of stake pockets 100x50 mm in the external frame of the load area - Galvanized extensions, extendable by approx. 230 mm per side - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the chamfered area of the load area - Anti-slip sand layer painted on the checker plate above the king pin and load area - Mounting for beacon on the warning panels - European reflective plates (red-yellow) at the rear of the trailer - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads, including load chart - HRM metallization (High Resistance Metallisation) of the external frame Nljdpfx Aieuqlmnjbsa - Complete steel construction shot-blasted, then the defined visible surfaces finished hot-metallized with ZINACOR 850 (zinc 85% - aluminum 15%)

Stanje: novo, lastna masa: 12.800 kg, največja dovoljena obremenitev: 36.200 kg, skupna masa: 49.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.850 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 375 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 12.800 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimised loading platform length, approx. 3,750 mm in length - Gooseneck can be raised/lowered hydraulically and is detachable - Technical fifth wheel load: 25,000 kg - For tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading platform: - Low-bed with external beams, designed as a telescopic vessel bridge in low-profile construction with front extension - Length 6,850 mm x width 2,540 mm - One locking position approx. every 1,000 mm on the extension Rear running gear: - Rear running gear with closed outer frame featuring checker plate cover and continuous prism excavator recess, approx. 1,250/700 x 505 mm, open at the rear Axles, suspension and tyres: - “PENDLE-AXLE”, all axles force-steered hydro-mechanically - Hose rupture valves on axle equalising cylinders with automatic reset function - Hydraulic cylinders with shut-off valves and pre-locking pins for securing in raised position - Final coat for axles with two layers of 2K acrylic paint, single-colour in “FAY-Grey-34-0260” Nlodsvy Edcjpfx Aibea - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres: 245/70 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 14 - TPMS sensors installed in all wheels, incl. spare wheels Included accessories: - Plug-in steel front wall, approx. 400 mm high - 3 kW electro-hydraulic unit for hydraulic operations, except for hydraulic winches - One spare wheel with mounting adapter - External beams of the gooseneck with mounting holes for bolt-on lashing rings - Plug-in ALU side walls on the gooseneck, approx. 400 mm high, anodised - One plug-in ALU rear wall on the gooseneck, approx. 400 mm high, anodised - Checker plate covering on the gooseneck - Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide - Operating area lighting at the gooseneck with on/off switch - Hydraulic traverse to support the gooseneck on the tractor or a dolly - 2" king pin - Anti-slip stickers on the left chamfer of the gooseneck - The rear upper area of the gooseneck is closed with a removable cover - 4 wheel chocks with holders - Hydraulic connections from gooseneck to low-bed with multi-coupling instead of screw couplings - 1 pair of steel ramps with climbing strips and retaining bolts for bridging the low-bed mounting hooks - The ramps can be placed over or between the hooks - Mounting option for steel drive-on ramps at the rear between the external beams of the gooseneck - Prepared for bolt-on container locks for 1 x 20ft on the external beams - Mechanical pin and lug coupling from low-bed to running gear for exchanging the loading platform or inserting extension beams - With electro-pneumatic-hydraulic couplings - The outer beams of the low-bed are coated with painted-on sand layer as anti-slip protection - Removable (galvanised) load floor, can be inserted in 3 elements between the external beams, with hardwood surface - Foldable extensions, approx. 230 mm per side - Hanging strip at the front of the rear running gear to the low-bed for loose approach ramps - 2 pairs of stake pockets recessed into the outer frame of the running gear, for plug-in stakes approx. 100 x 50 mm - Hanging strip for loose ALU approach ramps at the rear cross member of the vehicle - Central lubrication system with 2 pumps - Radio and cable remote control - 4 extendable warning signs, approx. 423 mm x 423 mm - Numerous lashing positions

Stanje: novo, lastna masa: 10.600 kg, največja dovoljena obremenitev: 39.400 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 760 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R17.5, barva: siv, obratovalna teža: 10.600 kg, Oprema: ABS, Gooseneck: - Gooseneck with 30 mm hardwood flooring - Gooseneck at rear in straight version - 3 pairs of lashing rings (LC 5,000 daN) Extendable load floor: - Load floor in extendable configuration - 5 pairs of lashing rings foldable outward - 3 pairs of lashing rings foldable outward - 1 pair of lashing rings laying at the front end of the load floor - Cut-outs in the outer frame of the load floor for attaching tension straps - Approx. 48 mm hardwood flooring, checker plate covering above the axles Landing legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: - BPW axles, two rigid axles, two self-steering axles - Air suspension with drum brakes, with lift/lower function - The self-steering axles are equipped with an electromagnetically operated reverse lock, which can be activated via reverse gear or manually - Axle tools - Tyres 205/65 R17.5 Brake system: - Brake system compliant with EU regulations with EBS-E (4S3M) Steel structure: - Steel construction made from high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system in accordance with EU regulations, lighting 24 Volt, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets - Connections according to ISO: - 24N ISO-1185 Nedot Ag Uwopfx Aibela - 24S ISO-3731 - 15-pin ISO-12098 Paintwork: - High-quality and durable corrosion protection on the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality single-colour 2-component (2K) top coat in Novagrau - Rear section metallised and painted in RAL 9010 (Pure White) Included accessories: - One spare wheel with holder in front of the bulkhead - 2" king pin - Galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanised connection bar at the front - 4 wheel chocks with holder at the front wall - Galvanised folding supports under the load floor slope - Holder for a warning beacon at the rear of the trailer - Galvanised extensions, extendable by approx. 230 mm per side - White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear - On the gooseneck and rear panel, left and right, one bracket each for warning panels including socket - European reflective markings (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system according to ECE R 141 - On the gooseneck, plug-in ALU side walls and rear wall, approx. 2,440 x 400 mm - The rear, galvanised plug-in side stanchions are removable, length of the body approx. 2,560 mm - 7 pairs of WADER container pockets - 1x 20ft container on the load floor; 1x 40ft container on the load floor; 1x 40ft container above the gooseneck; 2x 20ft container - 7 pairs of stanchion sockets for plug-in stanchions 100 x 50 mm in the outer frame of the load floor - Lift axle on the front axle with control via TEBS E, depending on the current axle load and load condition - Sliding plug-in rail for ALU loading ramps at the rear of the vehicle - Anti-slip sand finish painted on the checker plates on the gooseneck and load floor - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm, each with a position lamp - Holder for warning beacon on the warning boards - 80 km/h speed stickers at the rear and on both sides - Axle load gauge for determination of axle loads inclu

Stanje: novo, lastna masa: 7.900 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, obratovalna teža: 7.900 kg, Oprema: ABS, Swan Neck: - Swan neck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood decking Loading Area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Recess in the chamfer and encroaching into the loading area for receiving the excavator bucket stick approx. 2,900 x 750 x 210/290 mm - Cut-outs in the external frame of the loading area for attaching tension straps - Hardwood decking approx. 48 mm thick, over the axles with tread plate covering Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Axles and Tyres: - BPW axles and suspension, 2 axles rigid, 1 axle self-steering t- Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raising and lowering valve - TPMS tyre pressure monitoring system compliant with ECE R 141 - Tyres 235/75 R 17.5 Paintwork: - Complete steel structure blasted automatically by wheel blast machine after welding - Second blasting with corundum for optimal adherence of the coating system - Final coating: two layers of 2K top coat, solid colour in RAL MB 7350 Novagrau - Rims painted silver Nlsdpfjunrapox Aibea - Rear section metallised and coated in RAL 9010 (Pure White) - Cavity sealing with special wax Electrical System: - Electrical system according to EU standards, 24 volt ASPÖCK-NORDIK (ASS3) lighting - ASPÖCK-UNIBOX at front connection rail with sockets 2x 7-pin & 1x 15-pin Included Accessories: - Multiple lashing positions - 2" king pin - One galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on galvanized front connection rail - 4 wheel chocks with holders mounted on the front wall - Receiver at rear of swan neck for ALU loading ramps - Galvanised folding supports beneath rear chamfer of loading area - Bracket for beacon at rear of trailer - Galvanised extendable outriggers, extendable by approx. 230 mm per side - White reflector tape to EU spec at sides and rear, red at rear - Brackets for warning signs on left and right of swan neck and rear panel, including socket - ALU side boards and rear board on swan neck, removable, approx. 2,440 x 400 mm - Rear galvanised stake pockets are removable - 2 pairs WADER container pockets in loading area for 20ft container - 6 pairs stake pockets for removable stakes 100 x 50 mm in the outer frame - Adjustable hanging rail for ALU access ramps at the rear of the vehicle - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the loading area chamfer - Sand-finish anti-slip coating painted onto the tread plate on swan neck and loading area - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm with position light - Bracket for beacon fitted to warning boards - 80 km/h speed sticker rear and on both sides - European reflective signs (Red-Yellow) at the rear of trailer - Manual and operating instructions on USB stick - HRM metallisation (High Resistance Metallisation) of the external frame - Complete steel structure shot-blasted, then specified visible surfaces metallised with ZINACOR 850 (Zinc 85% - Alu 15%) hot-finished

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: YA9TL510050113953, lastna masa: 27.720 kg, največja dovoljena obremenitev: 70.000 kg, skupna masa: 100.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2005, naslednji pregled (TÜV): 12/2026, dolžina tovornega prostora: 14.200 mm, širina tovornega prostora: 3.250 mm, skupna dolžina: 23.950 mm, skupna širina: 3.250 mm, skupna višina: 1.050 mm, vzmetenje: hidravlika, barva: modra, Leto izdelave: 2005, število osi: 7, Naprodaj je nizkopodni priklopnik Faymonville. Nsdpex Afbvsfx Aibsla Število osi 2+5 = 7 Vedno vzdrževan v lastni delavnici in je v VRHUNSKEM stanju. Priklopnik je bil uporabljen izključno za prevoze v EU – baltske države, Nemčijo in okolico. Približno 1-2 krat na tri mesece. Nizkopodni priklopnik se nahaja v Latviji, 3405 Liepaja! Podrobnosti po slikah!

Stanje: rabljeno, lastna masa: 12.450 kg, največja dovoljena obremenitev: 32.550 kg, skupna masa: 45.000 kg, prva registracija: 11/2008, dolžina tovornega prostora: 9.730 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, barva: oranžna, obratovalna teža: 12.450 kg, Very well-maintained vehicle from first owner Meusburger MTS 3 - 45T Three-axle low-bed trailer with drive-over loading ramps Nedswb Sh Aopfx Aibola Heavy-duty transport Model MTS 3 Gross vehicle weight - 45,000 kg Payload - 32,550 kg Length - 13,900 mm Width - 2,500 mm Air suspension

Stanje: rabljeno, lastna masa: 10.000 kg, največja dovoljena obremenitev: 39.000 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2025, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, Oprema: ABS, dvižna zadnja plošča, For every used semi-trailer, you receive a current and comprehensive inspection and functionality report. Chassis: - Sturdy steel frame weldment with front frame camber and level loading platform, rear tapered edge approx. 500x100 mm - Neck 200 mm with beveled front corners - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area of the rear taper) - 2 king pin positions with replaceable 2" king pin - Outer frame closed outwards as a hole-type external frame - Load deck with extendable center frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm - Frame in front of and behind the division with 80x80 mm step - Reinforced frame version / point load in retracted position at center of gravity - With excavator trough (without covering), approx. 220 mm deep, approx. 600 mm wide, starting after 2nd axle to end of vehicle - 1 pair wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm Ramps: - 2 pieces 2-part loading ramps, special design with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting unit (only in combination with electro-hydraulic unit) - Width approx. 800 mm - Wood covering - Incl. traction ribs on loading ramps - Lockable in transport position with lashing straps Nlsdpfx Aexxl E Heiboa - Operation by control lever mounted at rear right in frame - Laterally hydraulically adjustable Flooring: - 35 mm larch wood floor with aluminum omega profiles Axles, Steering and Tyres: - BPW air suspension axles, each with 10 t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lift and lowering device with total lift approx. 200 mm - 2nd driving height via ball valve +50 mm - 1st axle liftable (wired via EBS), automatic activation with mechanical emergency operation via button on trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, centrally aligned offset - 12 tyres, 245/70 R 17.5 143/141J, tubeless - Incl. tyre pressure monitoring Accessories: - Plug-in side and rear boards on the gooseneck, approx. 400 mm high - Spare wheel carrier - Lateral aluminum underrun protection - 4 wheel chocks with holders - Long license plate holder on end cross member - 1 ECE sign insertable at rear - 11 pairs of 10t lashing modules on the side: - 2x on the gooseneck - 2x on the deck before extension - 7x after extension - Pull-out warning signs incl. 3 position lamps each, front at landing gear and rear before end cross member, continuously extendable up to deck width of 4,500 mm - 4 mountings for warning signs to be inserted into stake pockets on the deck - 6 pairs of stake pockets on the side for plug-in stakes 100x50 mm - 2 rows of crosswise stake pockets for plug-in stakes 100x50 mm on the gooseneck from outer frame inwards to main frame (1x before, 1x after king pin positions) - 3 rows of crosswise stake pockets for plug-in stakes 100x50 mm on deck from outer frame inwards to main frame (1x before extension, 1x after extension, 1x after 3rd axle) - 2 pairs of steel plates in the load deck for container locks to accommodate 1x 20ft container

Stanje: novo, Leto izdelave: 2025, 5-osni nizkopodnožni priklopnik Nlodpsrlm Txjfx Aibsa Za več informacij nas prosimo kontaktirajte.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 8.000 kg, največja dovoljena obremenitev: 39.000 kg, skupna masa: 47.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 13.000 kg, dovoljena osna obremenitev (os 2): 13.000 kg, dovoljena osna obremenitev (os 3): 13.000 kg, prva registracija: 07/1983, dolžina tovornega prostora: 11.870 mm, širina tovornega prostora: 2.500 mm, vzmetenje: parabolično listje (vzmet), barva: bela, Leto izdelave: 1983, Polpriklopnik CTC ZA90SRT47 Nizkopodni 11,87 m s hidravličnimi rampami in vitlom (4,10 m + 7,35 m) 3 osi Njdpfoy Axufsx Aibela Parabolično vzmetenje Dovoljena skupna masa 47.000 kg – nosilnost 39.000 kg Za specialne prevoze, dovoljena skupna masa kompozicije 56.000 kg Neto izvozna cena: 18.000,00 EUR Vse informacije brez garancije/ možnost napake pridržana.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 11.200 kg, največja dovoljena obremenitev: 25.600 kg, skupna masa: 36.800 kg, konfiguracija osi: 2 osi, prva registracija: 09/2007, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 500 mm, skupna dolžina: 13.700 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 R 17.5, barva: svetlo siva, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2007, Oprema: ABS, Rabljen polpriklopnik culla Bertoja, letnik 2007, 2 osi s hidravličnim krmiljenjem, podaljšljiva culla z osrednjim vzdolžnim nosilcem za dodatnih 4,0 m, zaprta culla dolžine 6,20 m, višina od tal 50 cm, nastavljiv in snemljiv vrat, stranski razširitveni elementi na platformi, idealni za kombajne, pnevmatsko vzmetenje, ABS, ventila za regulacijo višine, tehnični pregled do 31.10.2026 – PRODAJALEC INTERDRIVE SRL – PARMA. Njdpfx Aoy A Ih Ijibsla

Stanje: kot nova (razstavni stroj), največja dovoljena obremenitev: 1.900 kg, skupna masa: 2.500 kg, dolžina tovornega prostora: 2.590 mm, širina tovornega prostora: 1.430 mm, Buy online at trailer-shop.de Njdey Hcc Uspfx Aibsla Wide selection of models available online at ANHÄNGERWIRTZ Shop conveniently online 24/7 Pick up yourself or have it delivered 😊 The online pickup marketplace for your new trailer offers leading brand products! Over 850 new trailers in stock Over 130 used trailers constantly available. Non-binding example: Display trailer 24 while stocks last! Brenderup Tipper BT 4260 SB 259x143x35cm Electric Steel Sides Steel Floor (S) 2500kg Rear tipper BT4000 2500kg 259x143x35cm, flatbed tandem V chassis, steel drop sides, foldable and removable on all four sides, steel floor, electrically tipper with built-in battery, DIN tie-down loops on chassis frame, automatic jockey wheel..... Available online only! Invoice with stated VAT Guarantee - Trailer dealer for over 35 years Sales & telephone ordering during business hours Monday-Friday or round the clock via our online shop at trailer-shop.de Copyright - Trademark Protection 04/26 312794

Stanje: novo, lastna masa: 525 kg, največja dovoljena obremenitev: 2.125 kg, skupna masa: 2.700 kg, dolžina tovornega prostora: 2.600 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 200 mm, buy online at trailer-shop.de At ANHÄNGERWIRTZ, many models available online Convenient 24/7 shopping online Pick up yourself or have it delivered 😊 The online pickup market for your new trailer offers top brand products! Over 850 new trailers in stock Over 130 used trailers always available. Non-binding example: Many versions available immediately Martz machinery transporter BUILDER Bau 3 260/2 S 260x150cm (S) 2700kg Machine transport trailer Builder BAU-3 260/2 S 2.7T Loading area: 260 x 150 x 20 cm GVW: 2700 kg Tandem axle, V-drawbar, galvanized steel drop sides, anti-slip phenolic floor, 6 lashing rings each 250 daN on the loading floor, shovel holder, ramp gate with air circulation and support legs, automatic jockey wheel, 13-pin plug, online offer only Invoice with VAT shown - trailer dealer for over 35 years Sales telephone order acceptance during our business hours Monday-Friday or around the clock via our online shop Nlsdpfx Aoy Ev Hwoibea at trailer-shop.de Copyright - Trademark protection 04.26 BUILDER2700260PRO+AK

Stanje: novo, lastna masa: 525 kg, največja dovoljena obremenitev: 2.125 kg, skupna masa: 2.700 kg, dolžina tovornega prostora: 2.600 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 200 mm, buy online at trailer-shop.de At ANHÄNGERWIRTZ, many models available online Convenient 24/7 shopping online Pick up yourself or have it delivered 😊 The online pickup market for your new trailer offers top brand products! Nodpfxjy Evube Aibola Over 850 new trailers in stock Over 130 used trailers always available. Non-binding example: Many versions available immediately Martz machinery transporter BUILDER Bau 3 260/2 S 260x150cm (S) 2700kg Machine transport trailer Builder BAU-3 260/2 S 2.7T Loading area: 260 x 150 x 20 cm GVW: 2700 kg Tandem axle, V-drawbar, galvanized steel drop sides, anti-slip phenolic floor, 6 lashing rings each 250 daN on the loading floor, shovel holder, ramp gate with air circulation and support legs, automatic jockey wheel, 13-pin plug, online offer only Invoice with VAT shown - trailer dealer for over 35 years Sales telephone order acceptance during our business hours Monday-Friday or around the clock via our online shop at trailer-shop.de Copyright - Trademark protection 04.26 BUILDER2700260PRO+AK

Stanje: novo, številka stroja/vozila: AHW BJT 543-1320, največja dovoljena obremenitev: 2.840 kg, skupna masa: 3.500 kg, dolžina tovornega prostora: 3.200 mm, širina tovornega prostora: 1.700 mm, Leto izdelave: 2026, ANHÄNGERWIRTZ, vaše odredište za nove prikolice, nudi snažne brendirane prikolice! Preko 850 novih prikolica na lageru Preko 130 polovnih prikolica stalno u ponudi Nedpfxsy D E Sms Aibjla Neobavezan primer: Mašinski transporter Cargo Digger Plant 2 320x170x15cm 3500kg \ Tandem niska prikolica u V-šasiji – inerciona kočnica – pneumatici 12" – visina utovarne površine 38cm – čelično korito pocinkovano sa rešetkastim podom, prstenovi za vezivanje po DIN standardu – postolje za kašiku montirano – sklopive i pomične čelične rampe za utovar, montiran rezervni točak, zaključavajuća kuglasta kuka, ojačano potporno točak..... Prodaja 24/7 putem naše online prodavnice na trailer-shop Telefonsko naručivanje: PON. – PET. 08:00 do 12:30 i 14:00 do 18:00 ili 24/7 preko naše online prodavnice na trailer-shop de Sadržaj i slike podležu autorskim pravima – logotipi su žigovi 04/26 543-1320

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 10,2 kW (13,87 KM), vrsta prenosa: samodejen, vrsta goriva: dizel, barva: rumena, lastna masa: 1.150 kg, dvižna višina: 2.610 mm, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, število sedežev: 1, prostornina žlice: 0,026 m³, širina izkopne žlice: 380 mm, Leto izdelave: 2024, obratovalne ure: 1 h, Oprema: dodatne luči, hidravlika, hidravlika prijemala, hidravlično kladivo, kabina, pogon na vsa štiri kolesa, standardna žlica, zaščita za glavo,

Stanje: novo, številka stroja/vozila: AHW BJT 543-1320, največja dovoljena obremenitev: 2.840 kg, skupna masa: 3.500 kg, dolžina tovornega prostora: 3.200 mm, širina tovornega prostora: 1.700 mm, Leto izdelave: 2026, ANHÄNGERWIRTZ, vaše odredište za nove prikolice, nudi snažne brendirane prikolice! Preko 850 novih prikolica na lageru Preko 130 polovnih prikolica stalno u ponudi Neobavezan primer: Mašinski transporter Cargo Digger Plant 2 320x170x15cm 3500kg \ Tandem niska prikolica u V-šasiji – inerciona kočnica – pneumatici 12" – visina utovarne površine 38cm – čelično korito pocinkovano sa rešetkastim podom, prstenovi za vezivanje po DIN standardu – postolje za kašiku montirano – sklopive i pomične čelične rampe za utovar, montiran rezervni točak, zaključavajuća kuglasta kuka, ojačano potporno točak..... Nlodpoy Aftusfx Aiboa Prodaja 24/7 putem naše online prodavnice na trailer-shop Telefonsko naručivanje: PON. – PET. 08:00 do 12:30 i 14:00 do 18:00 ili 24/7 preko naše online prodavnice na trailer-shop de Sadržaj i slike podležu autorskim pravima – logotipi su žigovi 04/26 543-1320

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 11.500 kg, največja dovoljena obremenitev: 52.500 kg, skupna masa: 64.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, dolžina tovornega prostora: 9.000 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 980 mm, skupna dolžina: 13.550 mm, skupna širina: 3.000 mm, skupna višina: 3.565 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, stanje pnevmatik: 100 odstotek, medosna razdalja: 1.360 mm, največja hitrost: 100 km/h, barva: sivo-črna, Leto izdelave: 2026, NÜKTE – CETRATEK 4-Axle Lowbed Semi-Trailer Powerful. Robust. Built for tough applications. The NÜKTE – CETRATEK 4-axle lowbed semi-trailer stands for maximum stability, high payload, and uncompromising everyday usability in professional heavy-duty transport. Featuring massive 4 x 10-tonne axle configuration on robust TRAX axles, a durable air suspension system, and a high-strength I-beam chassis constructed from S355J2+N quality steel, this lowbed trailer is the ideal solution for transporting construction machinery, agricultural equipment, wheel loaders, excavators, and heavy-duty vehicles. Even in its standard configuration, this semi-trailer impresses with well-thought-out, practice-oriented features: The first TRAX axle is configured as a lift axle, which significantly reduces tire wear during empty runs while improving maneuverability. The fourth TRAX axle is steered, allowing for precise maneuvering even on tight construction sites and company premises. A particular highlight is the hydraulically operated, laterally adjustable, one-piece loading ramps, enabling fast, safe, and convenient loading and unloading. Each ramp is rated for 20 tonnes of load per ramp, making them perfect for heavy machinery and vehicles. Maximum stability during loading is ensured by the standard hydraulic rear support system, which includes mechanical drop-down props. User-friendly operation is possible either via hydraulic remote control or directly at the vehicle, allowing all ramp and support functions to be operated safely and efficiently. In terms of quality, this trailer sets new standards: The entire chassis is shot-blasted, primed, and then coated twice with a high-quality 2-component paint system. We offer a 5-year warranty on the paintwork. The loading platform is fitted with 55 mm Dabema hardwood and protected in high-stress areas with reinforced checker plate. A high-quality Aspöck ADR-certified electrical system ensures maximum operational safety and meets the highest requirements for professional road use. With a loading platform length of 9,000 mm, width of 2,550 mm plus side extension of 250 + 250 mm, total length of 13,550 mm, loading height of 980 mm, and permissible gross weight of 64,000 kg, this lowbed trailer is perfectly suited for daily heavy-duty operations. The kingpin load is 24,000 kg, total axle load is 40,000 kg (4 × 10 t). Additional standard features include: - WABCO EBS 4S/2M - Air suspension - 16 + 1 tyres Nlsdpfx Aijy Awchjbja - 245/70 R 17.5 - Galvanised 12-tonne lashing rings - Toolboxes - Spare wheel - Aluminium covers on the gooseneck - Side extensions - Wooden decking on the platform Quality that convinces The high-grade finish with the modern 2-component paint system and the use of robust Dabema hardwood combined with additional reinforced checker plate ensure an exceptionally long service life—even under the harshest operating conditions on construction sites and in heavy-duty applications. CETRATEK—Technology you can rely on. Technical specifications and prices subject to change. All images are examples and may show special equipment or optional features.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 9.500 kg, največja dovoljena obremenitev: 44.500 kg, skupna masa: 54.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 12.000 kg, dovoljena osna obremenitev (os 2): 12.000 kg, dovoljena osna obremenitev (os 3): 12.000 kg, dolžina tovornega prostora: 12.950 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 980 mm, skupna dolžina: 13.550 mm, skupna višina: 3.585 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17,5, stanje pnevmatik: 100 odstotek, medosna razdalja: 1.360 mm, največja hitrost: 100 km/h, barva: sivo-črna, Leto izdelave: 2026, 3-axle lowbed semi-trailer | Lift axle | Hydraulic ramps | Extendable | 5-year warranty on paintwork | Options such as galvanization available Robust and professional 3-axle lowbed semi-trailer in heavy-duty design, ideal for transporting construction machinery, agricultural equipment, and heavy vehicles. The laterally extendable loading platform and hydraulically adjustable ramps allow for flexible and rapid loading of various types of machinery. Technical specifications: Overall length: 13,550 mm Width: 2,550 mm, extendable sideways: +250 mm per side Total width extended: 3,050 mm Platform length: 9,000 mm + 3,950 mm Platform height: 980 mm Gross vehicle weight: 54,000 kg Equipment: - 3 TRAX axles with air suspension, 12 tonnes each - 1st axle liftable - WABCO EBS braking system Nljdpeyzzqgefx Aibsa - ADR-certified Aspöck / SABA LED lighting system - Hydraulically operated rear ramps, laterally movable - Hydraulic system with remote control - Additional manual control - Hydraulic rear supports + mechanical drop-down supports - 55 mm DABEMA hardwood floor - Reinforced steel / checker plate sections - Galvanized lashing points - Robust S355J2 heavy-duty chassis Delivery time (if not in stock) approx. 12 weeks after order Price and technical changes as well as prior sale reserved. The images shown are examples and may contain special equipment and/or optional features.

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, moč: 10,2 kW (13,87 KM), vrsta prenosa: hidrostat, vrsta goriva: dizel, barva: rumena, obratovalna teža: 1.295 kg, dvižna višina: 2.980 mm, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, število sedežev: 1, prostornina žlice: 0,026 m³, širina izkopne žlice: 380 mm, Leto izdelave: 2025, obratovalne ure: 2 h, Oprema: dodatne luči, gumene gosenice, hidravlika, hidravlika prijemala, hidravlično kladivo, nastavljivo podvozje, pogon na vsa štiri kolesa, standardna žlica, We offer you reliable and robustly engineered mini excavators featuring many extras and stylish design. Offer includes: Mini excavator, single-axle low-bed trailer, and a small accessory package! Our machines are sold as demonstration units, meaning they may have up to 5 operating hours due to loading and unloading for transport and brief trial runs. For every excavator you purchase from us, you receive a CE certificate, an invoice with itemized VAT, and an operator’s/repair manual in German. Additionally, we offer financing options for commercial customers, spare parts procurement, and excellent service! Technical Data – Mini Excavator: - Model: BK1350JSR JOYSTICK with swing boom and adjustable undercarriage - Brand: Berger Kraus - Operating weight: 1295 kg - Bucket capacity (pre-installed): 0.026 m³ - Bucket width (pre-installed): 380 mm - Engine: KUBOTA EURO 5 (D722) 3-cylinder liquid cooled (diesel) - Rated power: 10.2 kW (14 HP) @ 2500 rpm - Displacement: 719 cm³ - Main pump: TAIFENG piston pump - Oil flow: 45 L/min - Slew motor: EATON (USA) - Travel motor: JINGKEN hydraulic motor - 2 travel speeds: 2 / 3.6 km/h - Hydraulic oil tank: 15.3 L - Fuel tank: 11 L Working Ranges: - Digging reach at ground: approx. 3380 mm - Max. digging reach: approx. 3410 mm - Max. digging depth: approx. 2002 mm - Max. dumping height: approx. 2980 mm - Max. discharge height: approx. 2170 mm - Minimum swing radius: approx. 1490 mm - Max. dozer blade lift height: approx. 140 mm - Max. dozer blade digging depth: approx. 200 mm - Slew radius: 360° Dimensions: - Overall track length: approx. 1435 mm - Undercarriage width: approx. 850-1000 mm (adjustable) - Track width: approx. 180 mm - Track height: 320 mm - Overall dimensions (LxWxH): 3100x850(1000)x2320 mm Technical Data – Trailer: - Loading area dimensions (LxW): 2600x1503 mm - Permissible gross weight: 1800 kg - Unladen weight: approx. 478 kg - Payload: approx. 1322 kg - Coupling device by Knott - Axles including braking system by Knott - LED marker lights - LED outline lights - Galvanized loading ramp with support bracket - Plywood floor with lashing rings - Axle load: 1800 kg - Tongue load: 100 kg - Tires: 195/50R13C 104N - Wheel chocks - Folding jockey wheel - Bucket support Accessory Package: - Quick coupler (pre-installed) - Hydraulic thumb (pre-installed) - 800 mm bucket - 200 mm bucket - 380 mm bucket - Ripper tooth - Rake - Earth auger, 20 cm diameter - Toolbox In addition to the accessory packages, we offer a further selection of attachments, all available on our website. Please feel free to contact us by phone or email for a tailor-made offer. Nledpfx Ajyzi H Neibea As a licensed Berger Kraus and Martz partner, we are your point of contact for spare parts, additional attachments, or any questions and requests regarding your new machine. All information provided without obligation. Errors and changes excepted.

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, moč: 10,2 kW (13,87 KM), vrsta prenosa: hidrostat, vrsta goriva: dizel, barva: rumena, obratovalna teža: 1.295 kg, dvižna višina: 2.980 mm, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, število sedežev: 1, prostornina žlice: 0,026 m³, širina izkopne žlice: 380 mm, Leto izdelave: 2025, obratovalne ure: 2 h, Oprema: dodatne luči, gumene gosenice, hidravlika, hidravlika prijemala, hidravlično kladivo, nastavljivo podvozje, pogon na vsa štiri kolesa, standardna žlica, We offer you reliable and robustly designed mini excavators with many extras and a stylish design. Included in this offer: Mini excavator, 2-axle low-loader/trailer, and a large accessories package! Our machines are sold as demonstration vehicles, as they may have up to a maximum of 5 operating hours due to loading and unloading for transport to our location and minor test drives. With every excavator you purchase from us, you will receive a CE certificate, an invoice with shown VAT, and an operation/repair manual in German. Additionally, we naturally offer financing for commercial customers, spare parts procurement, and excellent service! Technical Data – Excavator: - Model: BK1350JSR JOYSTICK with swing boom and adjustable undercarriage - Brand: Berger Kraus Nljdpfoyzi H Asx Aiboa - Operating weight: 1295 kg - Bucket capacity (pre-installed bucket): 0.026 cbm - Bucket width (pre-installed bucket): 380 mm - Engine: KUBOTA EURO 5 (D722), 3-cylinder, liquid cooled (Diesel) - Rated power: 10.2 kW (14 HP) / 2500 rpm - Displacement: 719 cm³ - Main pump: TAIFENG piston pump - Oil flow: 45 L/min - Slew motor: EATON (USA) - Travel motor: JINGKEN hydraulic motor - 2 travel speeds: 2 / 3.6 km/h - Hydraulic oil tank: 15.3 L - Fuel tank: 11 L Working Ranges: - Digging reach at ground level: approx. 3380 mm - Max. digging reach: approx. 3410 mm - Max. digging depth: approx. 2002 mm - Max. dumping height: approx. 2980 mm - Max. discharge height: approx. 2170 mm - Minimum turning radius: approx. 1490 mm - Max. dozer blade lift height: approx. 140 mm - Max. dozer blade digging depth: approx. 200 mm - Slew radius: 360° Dimensions: - Total track length: approx. 1435 mm - Undercarriage width: approx. 850–1000 mm, adjustable undercarriage - Track width: approx. 180 mm - Track height: 320 mm - Overall dimensions (LxWxH): 3100 x 850(1000) x 2320 mm Technical Data – Trailer: - Loading area dimensions: 2600 x 1530 mm - Permissible total weight: 2700 kg - Unladen weight: approx. 534 kg - Payload: approx. 2166 kg - Hitch by KNOTT - Axles with braking system by KNOTT - LED marker lights - LED outline lights - Tail lights - Fire-galvanized loading ramp with support bracket - Bucket rest - Screen-printed floor including lashing points for securing - Axle loads per axle 1/2: 1350/1350 kg - Automatic jockey wheel - Support load: 120 kg - V-Deisel Accessories Package: - Quick coupler (pre-installed) - Mechanical thumb (pre-installed) - Hydraulic grading bucket, width 800 mm - Hydraulic breaker - Bucket 200 mm - Bucket 380 mm - Ripper tooth - Rake - Earth auger, diameter 20 cm - Toolbox In addition to the accessory packages, we offer a further selection of attachments, all of which can be found on our website. Please feel free to contact us by phone or email, and we will create a tailor-made offer for you. As a licensed Berger Kraus and Martz partner, we are your point of contact should you require spare parts or further accessories, or if you have any questions or suggestions regarding your new machine. All information without guarantee, errors and changes excepted.

Stanje: novo, lastna masa: 534 kg, največja dovoljena obremenitev: 2.166 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.960 mm, širina tovornega prostora: 1.520 mm, višina nakladalnega prostora: 250 mm, velikost pnevmatike: 195/50R13C, Temared Builder 2615S Construction Machinery Transporter – 2-axle with Mesh Ramp Technical Specifications: * Permissible gross weight: 2,700 kg – Tandem axle * Unladen weight: approx. 534 kg * Payload: approx. 2,166 kg * Internal box dimensions: 260 x 152 x 25 cm * Overall dimensions: 460 x 214 x 166 cm (LxWxH) * Tyres: 165R13C * Loading height: approx. 37 cm Features and Construction: * Frame and platform frame: welded and hot-dip galvanized * Digger bucket rest on the drawbar as standard * V-drawbar, jockey wheel standard * Overrun brake with reverse automatic, handbrake * Maintenance-free rubber torsion axles * Solid steel welded drop sides * Walkable side sections with integrated perforated pattern along full bed length * Anti-slip phenolic plywood floor * 6 retractable lashing rings in the side body frame * Full-width mesh ramp with lifting aid, approx. 150 cm > NEW: Gas strut (images may still show old springs) Nljdpfx Asv A Edbjibsa * Integrated ramp support * 12V electrics, 13-pin plug, reversing light * Multi-function lights protected in side carrier * Additional lights protected in the front bar > Includes German vehicle registration certificate and COC Optional Accessories: * Spare wheel * Lashing straps * Anti-theft device * etc. (Please enquire) ! Many more trailers at >>> trelex.de ! * Financing and trade-in possible! * Huge selection: Over 300 trailers in stock – visit us! * Expert and honest advice, fast processing. * Any questions? Just call us! PLEASE NOTE: Immediate collection only possible with pre-order!

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, lastna masa: 8.800 kg, največja dovoljena obremenitev: 28.000 kg, skupna masa: 36.800 kg, konfiguracija osi: 3 osi, prva registracija: 11/2002, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 750 mm, skupna dolžina: 13.700 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 205.65 r 17.5, odmik od tal: 750 mm, barva: svetlo modra, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2002, Oprema: ABS, dvižna zadnja plošča, Rabljen 4-osni nizkopodni polpriklopnik BPW Merker, z 3. in 4. krmiljeno osjo, pnevmatsko vzmetenje, spodnja platforma dolga 9,90 m in visoka 75 cm, enojne zadnje rampe dolge 3,10 m z elektrohidravličnim pogonom, ABS, ventil za nastavitev višine, zadnje podporne noge, ojačana pločevinasta tla, stranski kljuki na podestu, letnik 2002, tehnično pregledan do 30.9.2026 – PRODAJALEC INTERDRIVE SRL – PARMA. Nledpfxsyrnh Sj Aibsa