Nizki nakladalnik

Humbaur Humbaur 3-Achs Auflieger LIA&NLA/verzinkt/3mPaket/Hydr.

Stanje: novo, konfiguracija osi: 3 osi, Oprema: ABS, Availability: approx. 4 months after receipt of order! Kässbohrer 3-axle low loader rigid / non-extendable NEW VEHICLE Axles / brake system: # BPW axles with 17.5" drum brakes # 3rd axle as trailing steering axle # 1st axle as lift axle # WABCO braking system 4S/3M # 13 x branded tires 245 / 70 / 17.5" on steel rims Low loader: # Fifth wheel height: 1,250 mm # Low bed length: 9,240 mm # 7 x 2 stake pockets 52 x 102 mm # Lashing rings on gooseneck: 1 x 2 10t, 2 x 2 5t # Lashing rings on rear platform: 3 x 2 10t, 4 x 2 5t # Oversize boards extendable by 300 mm # Hardwood floor 45 mm # Colour: RAL 3020 Traffic Red Fpedjht Tt Hopfx Acwsp Loading ramps: # Hydraulically adjustable ramps with 40 mm hardwood surface # 4,200 mm long x 850 mm wide x 9° approach angle # Electric hydraulic pump 2kW # NATO socket for operation of electrohydraulics incl. cable Other features: # 4 x oversize signs with brackets for beacon # 1 x toolbox mounted on the right in the direction of travel # JOST full-length landing gear at front # Manually operated rear support, galvanized # 2" king pin + 2nd position for king pin # 24V lighting system Aspöck # Spare wheel carrier with spare wheel

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 930.993 km, moč: 397 kW (539,77 KM), prva registracija: 05/2012, vrsta goriva: dizel, gorivo: dizel, barva: bela, voznikova kabina: spalna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 5, Leto izdelave: 2012, Oprema: ABS, klimatska naprava, = Additional Options and Accessories = - Aluminium fuel tank - Leaf spring suspension - Electric windows - Electrically adjustable exterior mirrors - Speed limiter - Air suspension - Radio/CD player - Radio/cassette player - Sleeper cab - Sun visor - Power take-off (PTO) - Power take-off (PTO) = Notes = YV2AG40D6VB611496 = Further Information = AdBlue system: Yes Technical condition: very good Visual condition: very good Damages: none Contact Sales for more information. = Company Information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours. Prices are without VAT. No rights can be derived from the information provided. Office Phone: MOB: Nederlands - English - Deutsch - Français - Español - Italiano (Available on WhatsApp and Viber) MOB: Nederlands (Available on WhatsApp and Viber) When paying by bank transfer, the amount must be transferred to our bank account below. Always check the payment details provided on our website. If you have received different information, please contact us. If you have any doubts, please call us so that we can verify the invoice and/or payment. Fodpfx Asuq Rphecwjpp Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Stanje: novo, lastna masa: 13.250 kg, največja dovoljena obremenitev: 47.550 kg, skupna masa: 60.800 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 245/70 r17.5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings 30 mm thick hardwood flooring Extendable loading platform: Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8° 5 pairs of outward-folding lashing rings 3 pairs of outward-folding lashing rings 1 pair of flat lashing rings at the front of the loading area Cut-outs in the outer frame of the loading area for inserting tension straps Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Two-part steel ramps: One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering. Ramp with hydraulically folding and unfolding parts, hydraulic lifting system, and hydraulically adjustable position. Maximum load per pair: 40,000 kg Landing legs: JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tires: BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool Tires 245/70 R 17.5 Braking system: Braking system according to EU regulations with EBS-E (4S3M) without connecting lines to tractor unit Steel construction: Steel construction made from high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer High-quality one-color two-component (2K) top coat in Novagrau Rear section metallized and painted in RAL 9010 (pure white) Metallic paint not possible Electrical system: Electrical system according to EU regulations, lighting 24 volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Connections conforming to ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" kingpin One galvanized steel headboard approx. 400 mm high At the galvanized front connection strip, yellow-red air couplings 4 wheel chocks with holders at the headboard One spare wheel with holder in front of the headboard Electro-hydraulic power unit Rear and front remote steering via cable remote control with push-buttons, with single-track control of the axles Bracket at rear of gooseneck for ALU drive-on ramps European reflector signs (red-yellow) at trailer rear White reflective tape according to EU regulations at the sides, at the extension, and red at the rear At the gooseneck and on the ramps left and right, each with a holder for warning signs including socket Fpedsl Uxdkjpfx Acwop One holder for beacon at trailer rear Galvanized folding supports under the loading platform chamfer Ramp operating valves fitted on the right side of the trailer Cover plates to bridge the gap between ramps and loading platform One mudflap at trailer rear Manual and description on USB stick Central lubrication system BEKAMAX (Pico) with general-purpose grease NLGI-2 and removable pump guard On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm The rear galvanized stakes are removable, superstructure length approx. 2,560 mm One INOX toolbox 1,350 x 400 x 400 on the gooseneck, box covers oil filler cap 4 pairs of WADER container pockets in the loading area for a

Stanje: novo, največja dovoljena obremenitev: 31.500 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2025, Oprema: ABS, Priekaba Wiese ar trijų ašių važiuokle, kėlimo stalu ir atverčiamu galu. Idealiai tinka šakinių krautuvų ir (arba) darbo platformų pervežimui. Techninės specifikacijos. 3 x 10 t ašys Pakeliama ašis Fsdpfx Acovw Hmtowspp Valdoma ašis su „Smart Steering“ (vairavimas į priekį ir atgal) Išorinio rėmo važiuoklė su nuolydžiu Galinė konstrukcija, tinkama 18 t, pritaikyta 2- ir 3-ašių vilkikams Hidraulinis kėlimo stalas reguliuojamas 3 pozicijose Atverčiamas galas su hidrauliniais išstumiamais elementais, tinkamas naudoti kaip užvažiavimo rampos, pervažiavimo rampos arba kaip pakrovimo platforma (Bendro ilgio sumažinimas pakėlus galą vertikaliai) Nuotolinis valdymas rampoms ir kėlimo stalui Priekinė sienelė Grotelinis grindų paviršius Daug tvirtinimo taškų „SmartBoard“ sistema Centrinė tepimo sistema Plieninė konstrukcija, cinkuota ir nudažyta Galima įsigyti daugybę papildomų pasirinkimų, pvz.: - Gervė - Įrankių dėžė ant priekabos pakopos - Aliuminiai ratlankiai Daugiau informacijos pagal užklausą.

Stanje: rabljeno, Leto izdelave: 2015, obratovalne ure: 1.000 h, nosilnost: 5.000 kg, dvižna višina: 6.400 mm, vrsta goriva: dizel, gradbena višina: 2.790 mm, Oprema: kabina, zaščita za glavo, * Load capacity: 5,000 kg * Lifting height: 6,040 mm * Overall height: 2,790 mm * Weight: 7,960 kg * Width: 1,450 mm * Year of manufacture: 2015 Fpjdpotruxaefx Acwop * Adjustable forks -----Internal vehicle number: 9587----Errors and prior sale excepted.

Stanje: novo, lastna masa: 14.800 kg, največja dovoljena obremenitev: 61.700 kg, skupna masa: 76.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, velikost pnevmatike: 235/75/r17,5, barva: siv, Oprema: ABS, Gooseneck: • Gooseneck with rear chamfer of approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Loading Platform: • Extendable loading platform with rear chamfer of approx. 500 mm x 8° • 9 pairs of folding external lashing rings • 1 pair of recessed lashing rings at the front of the loading platform • Cutouts in the outer frame of the loading platform for attaching tension belts • Approx. 48 mm thick hardwood flooring, checker plate above the axles Landing Legs: • JOST mechanically operated landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: • BPW axles and suspension, 1st axle steering, 2nd and 3rd axle fixed, 4th and 5th axle follow-steering • Technical axle load: 12,000 kg • 1st, 4th, and 5th axles with electromagnetic reverse lock, activated via reverse gear or manually • Tyres: 235/75 R 17.5 3PMSF Brake System: • WABCO brake system in accordance with EU regulations including EBS-E (4S3M) Paintwork: • Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer • High-quality single-color two-component (2K) topcoat in MB 7350 Novagrau • Rear section metallized and painted in RAL 9010 (Pure White) Steel Construction: • Steel structure made from high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC (yield strength 355MPa) • S690QL/S700MC (yield strength 690MPa) Accessories: • One spare wheel with holder in front of the front wall • 2" king pin • Galvanized steel front wall, approx. 400 mm high • Front galvanized connection strip with yellow-red air couplings • 2 wheel chocks with holders mounted on the front wall • Rear mount on gooseneck for ALU drive-on ramps • Galvanized extendable wideners appx. 230 mm per side • Bracket for a beacon at the rear of the trailer • Galvanized supports under the chamfer of the loading platform • White reflector tape on the sides as per EU regulations, red at the extension and rear • Mounts for warning panels including socket left and right at the gooseneck and rear panel • Detachable ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • Rear galvanized plug-in stanchions removable (body length approx. 2,560 mm) • 3 pairs of WADER container pockets in the loading platform for a 20ft (30ft) or a 40ft container • 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform • Lifting axle on the front axle with TEBS E control according to the current axle load and loading condition • Movable mounting rails for ALU drive-on ramps at the rear of the vehicle • 20 x 20 mm square climbing strips at 200 mm intervals on the outer frame chamfer of the loading platform • BEKAMAX (Pico) centralized lubrication system with NLGI-2 standard grease and removable pump cover • Four extendable warning panels approx. 423 x 423 mm with a position light, extendable by approx. 400 mm • Holder for beacon mounted on the warning panels • European reflector plates (red-yellow) on the rear of the trailer • 80 km/h speed limit stickers at rear and both sides • Axle load gauge with load diagram included • HRM Metallisation (High Resistance Metallisation) of the outer frame • Complete steel structure is shot-blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - aluminum 15%) using hot finishing Fpedpfema Hf Rjx Acwep

Stanje: novo, največja dovoljena obremenitev: 36.937 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Leto izdelave: 2025, Oprema: ABS, Kässbohrer Low Loader with Hydraulic Gooseneck Available Immediately! TECHNICAL DATA: * Saddle height: 1,250 mm * Overall length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Platform height: 875 mm * Wheelbase: 8,480 mm * Axle spacing: 1,360 mm * Axle load: 30,000 kg * BPW axles with air suspension and drum brakes, 10-ton capacity * Unladen weight: 11,063 kg * Overall width: 2,550 mm * Permissible gross weight (60 km/h): 52,800 kg * Permissible gross weight (80 km/h): 48,000 kg CHASSIS: * 2x fixed axles at front, 1x trailing steering axle at rear * Manually adjustable axle lift system on the 1st axle, dependent on load * 12-fold tyres 245/70R17.5 * Air suspension, 1x load gauge FRAME: Manufactured from high-quality, high-tensile S700 MC steel * Gooseneck with 90° vertical corners * Jost landing legs at front * Foldable supports at rear * Grating floor RAMPS: * Ramp loading capacity: 40 tonnes * 2x hydraulic ramps, suitable for hydraulic sliding/folding operations, galvanized steel surface, 4,200 mm length and 850 mm width, 9° ramp angle, load capacity 40,000 kg and 3,510 mm height in closed position * Hydraulic gooseneck ramp: 2,800 mm long, 10° angle LOAD SECURING: * Lash rings 6x2 on the gooseneck with 6-ton capacity each, 6x2 on the platform with 6-ton capacity each, 8x2 on the outer frame with 6-ton capacity each * 8x2 stake pockets OTHER FEATURES: * 1x rotating beacon * 1x work light Fjdpfxet Aqv Se Acwopp * 2x2 oversize marker boards with lighting * SmartBoard For further information, please feel free to contact us.

Stanje: novo, največja dovoljena obremenitev: 37.460 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.180 mm, širina tovornega prostora: 3.000 mm, višina nakladalnega prostora: 890 mm, vzmetenje: zrak, Oprema: ABS, HUMBAUR 3-axle low-loader trailer with wheel recesses and cranked loading platform, Model HTS30K – Wheel Well Version --- INCLUDES lift axle & trailing steering axle with SAF air suspension INCLUDES aluminium side boards and toolbox on the gooseneck INCLUDES 3-meter extension package INCLUDES excavator trough INCLUDES large hydraulic package (hydraulic ramp lifters, hydraulic side shift, & hydraulic rear support) Specification: V41 * Perm. gross weight: 48,000 kg Fpjdpfokn N Rpjx Acwjp * Payload approx. 37,460 kg * Chassis frame and ramps hot-dip galvanized * Visible parts painted in RAL colour * SAF air suspension unit incl. raise/lower function * Lift axle with starting aid and self-steering rear axle * EBS Electronic Braking System * WABCO Smart Board for axle load display * Excavator arm trough approx. 3,000 mm in length * Loading height approx. 890 mm * Fifth wheel height approx. 1,230 mm * Tyres: 235/75R17.5 – 12 units * Low-bed length approx. 8,680 mm incl. incline * Gooseneck platform length approx. 3,500 mm incl. incline * 2" kingpin, adjustable by 340 mm for 2+3 axle tractor units * Wheel recess depth front 390 mm and rear 320 mm for various wheelbase sizes * Removable wheel recess inserts with hardwood covers * Gooseneck with 400 mm front wall * Aluminium side boards, 400 mm high, foldable + lockable storage box * 3 pairs of 6-ton recessed lashing rings in the raised deck * 3 pairs of 3-ton lashing points on the outer frame of the raised deck * 5 pairs of 10-ton recessed lashing rings in the low bed * 5 pairs of 6-ton lashing eyes bolted to the outer frame * 3 pairs of stake pockets in the outer frame (raised deck) * 5 pairs of stake pockets in the outer frame (low bed) * 3 pairs of 6-ton lashing eyes in the excavator arm trough * 3-metre widening package with folding outriggers, timber planks * Steel toolbox under the loading platform, lockable, with side compartment for timber planks storage * Warning package including lights * Rotating beacon at the rear * 2x LED reversing lights at the rear * 1-piece ramps approx. 3150 x 750 mm – approach angle approx. 10° * Softwood flooring on low-loader and gooseneck platforms * Hydraulic ramp lifters * Hydraulic side shift * Hydraulic rear support * COC documents * 40,000 kg gross weight only with special permit acc. to §70 * 1 pair of load guiding rails, galvanized * Gallows-type hanger for supply lines * Anti-slip strips on the loading ramp * Brake couplings: red/yellow * Electrics: triple socket with 2x 7-pin (1 x ISO 1185 / 1x ISO 3731, 24V-N/24V-S) and 15-pin ISO 12098 * ECE warning panel at the rear *Stock vehicle – available immediately *Subject to prior sale *Ex works price

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 55 kW (74,78 KM), vrsta goriva: dizel, barva: rdeča, skupna masa: 16.700 kg, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, Leto izdelave: 2022, Oprema: UVV varnostni pregled, La scalpeuse mobile Terex® Finlay 860 est un crible lourd compact et robuste orienté vers l’avant. Cette installation extrêmement polyvalente et flexible offre des performances optimales pour les applications de criblage primaire et secondaire, par exemple pour le traitement des granulats, du sable et du gravier, de la terre végétale, des gravats de construction et pour le recyclage, notamment lorsque l’espace sur site est limité. L’installation totalement autonome est pliable hydrauliquement et prête pour le transport en moins de 30 minutes. L’alimentation peut s’effectuer au choix via un concasseur, un crible ou un chargeur, ce qui la rend idéale pour les prestataires de services et les petits exploitants. - trémie d’alimentation 2,9 m³ - 1ère table de criblage 2,77 x 1,22 m - 2ème table de criblage 2,68 x 1,22 m - surface totale de criblage 6,7 m² - largeur du convoyeur principal 1.000 mm Fpjdjvygbcjpfx Acwjp - hauteur de déchargement 3.030 mm - largeur des convoyeurs latéraux (fines et fractions intermédiaires) 650 mm - hauteur de déchargement env. 3.640 mm - largeur des patins de chenilles 400 mm Dimensions de transport : 9,20 x 2,50 x 3,10 m Poids : env. 16.700 kg Cette offre est sans engagement, aucune garantie pour les détails de l’équipement. Sous réserve d’erreurs, de modifications et de vente préalable ! Réf. : 80

Stanje: rabljeno, Leto izdelave: 2014, obratovalne ure: 688 h, moč: 34 kW (46,23 KM), konfiguracija osi: 4x4, nosilnost: 400 kg, tip droga: teleskopski, dvižna višina: 16.210 mm, dvižna moč: 400 kg/m, dolžina platforme: 2.300 mm, širina platforme: 900 mm, gradbena višina: 2.370 mm, vrsta goriva: dizel, velikost pnevmatike: 12.5 - 18, stanje pnevmatik: 75 odstotek, barva: rdeča, Oprema: pogon na vsa štiri kolesa, Rough terrain articulated telescopic boom lift MANITOU, Type: 160 ATJ PLUS E3 4x4x4, First commissioned: 2015, MAX. PLATFORM HEIGHT: 16.21 m, HORIZONTAL OUTREACH: 8.94 m, FOUR-WHEEL DRIVE AND FOUR-WHEEL STEERING (4x4x4), 4-cylinder KUBOTA diesel engine (Type: V 2403 – 46.2 HP / 34.0 kW), BASKET CAPACITY: 400 kg (3 persons / material), EXTRA-LARGE PLATFORM (2,300 x 900 mm), CLIMBING ABILITY: 40%, hydraulic basket rotation of 350° (horizontal), self-levelling platform, warning beacon, lifting and tie-down points. KEY FEATURES / ADVANTAGES: COMPACT TRANSPORT DIMENSIONS / LOW OVERALL HEIGHT and NARROW OVERALL WIDTH / OFF-ROAD CAPABILITY (4WD, rough terrain tyres). Tyre specification: ROUGH TERRAIN TYRES (12.5-18 – approx. 75% tread remaining). Transport dimensions: Length: approx. 6,920 mm (approx. 4,820 mm with platform retracted), Width: approx. 2,300 mm, Height: approx. 2,370 mm (approx. 2,530 mm with platform retracted). Fpjdpfx Aowmaf Hocwep FINANCING AVAILABLE / COST-EFFECTIVE WORLDWIDE TRANSPORT / EXPORT: NET PRICE ONLY APPLIES © pb