Polpriklopnik z nizko nakladalno ploščadjo

Goldhofer STHP/XLE 6 kompl. Zug MB Arocs 2663 LS

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: XPNK0C200PD101865, prva registracija: 08/2024, naslednji pregled (TÜV): 08/2026, prostornina tovornega prostora: 77 m³, Leto izdelave: 2024, Technical Data: - Fifth wheel height: 1,250 mm / 1,350 mm - External length: 12,095 mm - Volume: 77 m³* - External width: 2,550 mm - External height: 3,950 mm - Front overhang: 1,495 mm - Landing leg distance: 2,350 mm - Wheelbase: 6,875 mm - Rear overhang: 3,725 mm - Number of axles: 3 - Tyre size (standard): 445/65 R 22.5 - Max. permissible axle load: 10,000 kg - 1st axle: Lift axle - 3rd axle: Trailing steering axle Ncedsun Iuispfx Agyep - Brakes: Drum brakes *Volume depends on selected options Standard Equipment: General - Aluminium chassis frame for low unladen weight and high payload - Aluminium landing gear construction with aluminium drop-down landing legs - All aluminium cross members in heavy-duty design; short cross members at the axles are fitted with steel U-profiles - Aluminium side walls consisting of a 3 mm inner and a 2 mm outer panel - Side walls are continuously welded on the entire inside height (for maximum strength and minimal contamination) - Hydraulic rear tailgate with 115° opening angle, integrated lighting, grain hatch and 115° opening angle - Operation via remote control - Structure ground, primed and finished in 2K paint - Two-year warranty on paint and structure Coupling - The fifth wheel plate is constructed with a robust steel box frame for a maximum coupling load of 18,000 kg (12,000 kg approved / 18,000 kg technically permissible) Cargo Area - Tread plate aluminium floor boards, 6 mm, 21 boards with aluminium and plastic end caps Wear/slide strips - Hydraulic moving floor with 3 cylinders, each moving 7 floor slats; equipped with pressure gauge and temperature protection - Automatically retracting moving bulkhead, hydraulically operated, controlled via remote control Price on request Subject to prior sale and errors. Locations may differ Internal ref.: S51573

Stanje: novo, lastna masa: 12.900 kg, največja dovoljena obremenitev: 34.100 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.850 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 350 mm, vzmetenje: drugo, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 12.900 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm in length - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractor units: 4x2, 6x2, and 6x4 Loading Platform: - Low-bed with external beams, extendable “SUPER LOW” design, approx. 6,850 mm in length - Low-bed with fixed hardwood flooring, approx. 40 mm thick, with mechanical locking device Rear Chassis: - Rear chassis with closed outer frame, chequer plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings, foldable to the outside - 1 pair of lashing rings recessed in the trough - 2 pairs of stake pockets for insertable stakes 100 x 50 mm in the external frame Pendulum Axle and Tyres: - "PENDULUM AXLE", all axles hydromechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and safety locking pins for securing in raised position - Axles painted with two layers of single-colour 2K paint in “FAY-Grey-34-0260” - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Accessories: - Preparation for the installation of bolt-on container locators for 1 x 20ft or 1 x 40ft container on the outer girders - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel - Yellow-red air couplers on the galvanized front connection bar - 4 wheel chocks - Remote steering from front and rear, operable via wired remote control with push buttons, with single-track alignment control - Hydraulic connections from gooseneck to low-bed with multi-coupling instead of screw couplings - Electro-hydraulic power unit - White reflective tape in accordance with EU regulations on sides, extension, and rear - European reflective plates (red-yellow) on the rear of the trailer - One bracket on each side of gooseneck and rear plate for warning panels, including socket - 6 pairs of threaded blocks between the lashing rings under the top chord on outer beam for mounting screw-on RUD Rings VLBG-4 - Detachable ALU side boards and rear board on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized insertable stakes are removable (body length approx. 2,560 mm) - Gooseneck rear upper area covered with removable cover - 5 pairs of stake pockets for insertable stakes 100 x 50 mm in the outer frame of the loading area - Folding extensions, approx. 230 mm per side - 2 pairs of bolted RUD Rings VLBG-4 M24 (LC 8,000 daN) - 1 pair of steel ramps for bridging the mounting hooks of the low-bed - Anti-skid sand layer painted on loading surface - 80 km/h speed stickers at rear and both sides - Spoon boom trough at rear chassis closed at rear with plug-in plate - Four extendable warning panels approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for rear axle steering in addition to cable remote, with indicator lights on receiver for alignment control - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard NLGI-2 grease - Load pressure gauge for determining axle loads - HRM Metallisation (High Resistance Metallisation) of outer frame Ncedpfohlz R Sjx Agysp - Complete steel structure shot blasted, then all defined visible areas metallized and finished with ZINACOR 850 (zinc 85% - aluminium 15%) hot galvanizing

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.636 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 60 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for particularly high stability and strength, aggregate chassis made of ALUMINUM, 140 mm frame height! (max. 39t) Axles and suspension: "Disc brake 22.5", Jost axle assemblies 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in tractor unit (without tractor unit equipment), 1st and 3rd axles separately liftable with start assist (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension, Wabco Trailerpulse tire pressure monitoring system with ZF wheel-mounted sensors Tires and wheels: 6 wheels with 385/65 R 22.5 tires (manufacturer's choice), Alcoa aluminum rims DuraBright-11, 75x22.5 ET 120, kingpin screwed into a 10 mm thick plate Landing legs: aluminum drop landing legs, 2 x 10t support load, aluminum pivoting feet used for air suspension Brake system: compliant with E.G. standards, two-line braking system, Wabco EBS electronic system with RSS (Roll Stability Support), spring-actuated braking system acting on two axles with control at the rear, aluminum air tank system, premium modulator Electrical system: compliant with StVZO, with 2 LED five-chamber Aspöck Europoint taillights integrated into aluminum rear, 24V system with 1x 5-pin and 2x 7-pin sockets, LED side marker lights, 2 separate LED work lamps at the rear, 2 LED work lamps at the height of the landing gear, 1 LED work lamp inside front left, operable from outside Superstructure / Body: "Interior fully welded" Nedpfx Agefakkcjyjcp Front wall load 17,250 dN, rear and side walls 10,250/13,400 dN, aluminum tipper body, side walls made from 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, fully welded with top and bottom rails, plank profiles inside fully welded, floor as moving floor system installed over 140 mm aluminum cross beams, floor load approx. 7 t/m², cross beams closely spaced (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles beveled, smooth straight rear wall with 2 aluminum swing doors 50/30 mm thick with 4 locking bars integrated into a welded aluminum rear frame mounted in Teflon and stainless steel bearings; following wall made of reinforced top aluminum rail with Kevlar curtain for complete emptying, side brush seal and additional Kevlar side curtain, integrated discharge chute with foldable closing plate at rear left, externally operable, inspection window rear left, 1 sampling gate per rear door (total 2), service door front left Hydraulic system: "Cargo Floor" moving floor system in the floor with hydraulically driven aluminum profiles on aluminum square tubes with approx. 670 PE-HD gliders, approx. 6 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and model to be specified, operating pressure 190–240 bar max., aluminum end pieces welded into the floor, electric controls at rear left with cable remote in a lockable waterproof box Accessories: PVC mudguards with rubber mud flaps, aluminum spare wheel holder, foldable aluminum side underrun protection, 1 tool box approx. 800x460x430 mm plastic, approx. 3.7 m aluminum ladder, roll tarp 680g/m² quality with roll tarpaulin system incl

Stanje: novo, številka stroja/vozila: ...7329, prevoženi kilometri: 622 km, moč: 309 kW (420,12 KM), vrsta goriva: dizel, konfiguracija osi: 8x8, gorivo: dizel, barva: drugo, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, število prestav: 16, skupna dolžina: 9.800 mm, skupna širina: 2.500 mm, skupna višina: 3.550 mm, Leto izdelave: 1996, The Iveco Trakker 8x8 tanker, model 340E42, is a highly mobile vehicle designed for refueling operations with diesel and kerosene. It features an 18,000-liter stainless steel tank manufactured by IWS DIEHL. This vehicle is in unused condition and comes from former army reserve stock, ensuring reliability and robust performance. Equipped with a 16-speed manual transmission and axle differential locks, the tanker offers solid handling and maneuverability on various terrains. It runs on single tires, specifically 365/85R20 Michelin XZL, and uses steel leaf springs for enhanced durability and load-bearing capacity. With only 622 kilometers on the odometer, this tanker is essentially new. The Iveco Trakker 8x8 is ideal for demanding environments and is a reliable choice for refueling operations that require large capacity and high mobility. = Further Information = Gross vehicle weight: 17,600 kg Nsdoutfy Tepfx Agyocp Engine make: IVECO Overall condition: very good Damage: none

Stanje: novo, lastna masa: 22.700 kg, največja dovoljena obremenitev: 79.300 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 11.000 mm, širina tovornega prostora: 2.850 mm, višina nakladalnega prostora: 920 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 22.700 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design to optimize load platform length, approx. 3,750 mm long, rear with chamfer approx. 850 mm x 10° - Hydraulically liftable and lowerable, stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open in the rear third - For tractor units: 6 x 4 and 8 x 4 Load platform: - Extendable load platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10° - Recess in the platform and into the chamfer for receiving the excavator dipper stick, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking pin and reinforced locking positions, supply lines protected within the extendable beams, automatically adapting to the actual platform length Ramps: - One pair of two-piece steel ramps approx. 4,650 mm long and 900 mm wide - Hydraulically foldable ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward - 25 mm "Super Grip" rubber flooring and approx. 5 mm checker plate as additional reinforcement on the chamfered section of the platform - Square climbing strips 20x30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, Suspension, and Tires: - PA-X axle system, all axles hydro-mechanically forced steered - Steering performance of the first two axles can be optimally adjusted to the platform length, both mechanically and hydraulically - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-fitted locking pins for securing in raised position - 245/70 R 17.5 3PMSF Accessories included: - Plug-in steel front wall, approx. 400 mm high - Supply line connection strip for tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from front, then every approx. 400 mm - 2 pairs of screw-in lashing rings included - Chequer plate covering over the gooseneck - On gooseneck: 1 pair of removable anodized ALU side walls, approx. 400 mm high - On gooseneck: 1 removable anodized ALU rear wall, approx. 400 mm high - 3.5" king pin / 2" king pin mounted - Guide plate of the gooseneck for fifth wheel plate, approx. 500 mm wide - 4 chocks - 4 axle load gauges - Mechanical drop tube supports at the front - 1 one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical drop tube supports at the front - Continuous steel deck with baked-in sand layer as anti-slip protection on the platform - 1 intermediate table, approx. 500 mm wide, for the extension, with slotted holes for insertable and relocatable bridging elements - Sand coating on support surfaces of the intermediate table - Mechanical locking for securing the intermediate table on the extension - 8 pairs of stake pockets in the outer frame - Extendable (galvanized) widenings, approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing spotlight each on left and right rear of the vehicle - 3 kW electro-hydraulic power unit - Loose widening planks in reinforced steel U-frame - Radio and cable remote control Nsdpfx Ask Af Svogyjcp - 4 warning signs, approx. 423 x 423 mm

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. Ncsdpfx Aorgzv Negyep GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Stanje: novo, največja dovoljena obremenitev: 65.400 kg, skupna masa: 93.400 kg, konfiguracija osi: 3 osi, Leto izdelave: 2025, Pos. 1: Type STZ-VP 6 (245) (2+4) with pendulum axles The specified technical data apply only when using a 4-axle tractor unit with the following data: Dimension a: 5,400 mm Fifth wheel height (loaded): 1,300 mm Weights at speed 80 km/h Fifth wheel load: 22,000 kg Axle load: 6 x 12,000 kg Gross vehicle weight rating: 94,000 kg Curb weight: approx. 29,600 kg Payload: approx. 64,400 kg (depending on load diagram / easyLOAD calculation) Dimensions Dimension b: 18,765 mm Overall length of combination: 24,165 mm Vehicle width: — Gooseneck length x width: 3,700 mm x 2,480 mm Fifth wheel height (loaded): 1,300 mm Articulation radius front/rear: 1,370 mm / 2,735 mm King pin: 3.5'' 2-axle front bogie Wheelbase: 1,510 mm Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S Steering axle arrangement: counter-steered Flatbed 14,400 mm (external beams), single telescopic with separating point Length x width: 7,000 mm x 2,750 mm Ncsdpfx Agjwg N N Ioysp Telescopic extension by / to max. 3,400 mm / 10,400 mm Deck height: 300 mm Plus 4,000 mm extension beam included Loaded loading height: approx. 450 mm 4-axle rear bogie Wheelbase: 3 x 1,510 mm Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S Steering axle arrangement: forced steering

Stanje: novo, konfiguracija osi: 3 osi, Leto izdelave: 2026, Further information here: Ncodpev D Abmjfx Agysp

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 10/2006, skupna širina: 2.850 mm, vzmetenje: drugo, velikost pnevmatike: 285/70R19.5, barva: črn, Leto izdelave: 2006, Oprema: ABS, = Additional Options and Equipment = - Central lubrication = Remarks = Faymonville Jeep Dolly D3 Year: 10-2006. 1 x lift axle. 1 x friction-steered axle (trailing steering axle). Air suspension. Maximum technical weight: 56,000 kg. Faymonville STBZ-5VA Year: 10-2006. Pendulum axles. Removable gooseneck. Movable platform. Extendable load bed: 400 cm. Load bed dimensions: 650 + 400 cm. Gooseneck load capacity: 50,000 kg. Maximum technical weight: 119,680 kg. = Further Information = Axle Configuration Tyre size: 285/70R19.5 Brakes: Drum brakes Front Axle 1: Twin tires; Left inside tread: 15%; Left outside: 60%; Right inside: 60%; Right outside: 60%; Suspension: Air suspension Front Axle 2: Twin tires; Left inside tread: 30%; Left outside: 30%; Right inside: 40%; Right outside: 60%; Suspension: Air suspension Front Axle 3: Twin tires; Steered; Left inside tread: 30%; Left outside: 70%; Right inside: 60%; Right outside: 70%; Suspension: Air suspension Nsdpfx Agexbng Esyscp Rear Axle 1: Twin tires; Steered; Left inside tread: 30%; Left outside: 60%; Right inside: 40%; Right outside: 70%; Suspension: Hydraulic suspension Rear Axle 2: Twin tires; Steered; Left inside tread: 50%; Left outside: 50%; Right inside: 30%; Right outside: 75%; Suspension: Hydraulic suspension Rear Axle 3: Twin tires; Steered; Left inside tread: 60%; Left outside: 60%; Right inside: 60%; Right outside: 60%; Suspension: Hydraulic suspension Rear Axle 4: Twin tires; Steered; Left inside tread: 60%; Left outside: 60%; Right inside: 40%; Right outside: 50%; Suspension: Hydraulic suspension Rear Axle 5: Twin tires; Steered; Left inside tread: 70%; Left outside: 70%; Right inside: 20%; Right outside: 70%; Suspension: Hydraulic suspension Weights Unladen weight: 36,600 kg Payload: 83,080 kg Gross vehicle weight: 119,680 kg Financial Information Price: On request Identification Model number: STBZ-5VA + 3 AXLE JEEP DOLLY / E = Company Information = ALL PRICES ARE NET EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), We speak Russian. We strive to provide accurate information; however, no rights can be derived from the listed texts.

Stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, moč: 43,39 kW (58,99 KM), vrsta goriva: dizel, Leto izdelave: 2004, Teleskopski izravnalni krak vključno s paketom žlic Njdpfx Aox A S Enogyecp Kabina poškodovana, glej slike!! Sicer popolnoma funkcionalen