Polpriklopnik s pohodnim podom

Knapen KX 770

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.900 mm, prostornina tovornega prostora: 56 m³, Oprema: ABS, Chassis – Lightweight Version Made from aluminium (15-6-12) Two fully automated welded I-beam longitudinal members with welded cross members. Chassis width: 1,600 mm Axles and Suspension - 430 mm disc brakes - Jost (ex Mercedes DCA) axle assemblies, 3 x 9 t with air suspension, air bellows centrally positioned on the chassis longitudinal member - 1st axle liftable with start-up aid and manual forced lowering - Smart Board Info Center - Raise/lower valve - BVA brake wear indicator Tyres and Wheels - 6 wheels with 385/65 R22.5 tyres from selected manufacturers, steel rims 11.75 x 22.5 ET 120 Landing Gear - Mechanical version with single-sided operation, 2-speed gearbox, swiveling foot for air suspension Brake System - According to E.G. standard, two-line Wabco system, spring-loaded parking brake on two axles, and Wabco EBS-E including RSS (Roll Stability System) and Premium Modulator, Wabco Smartboard Info Center, aluminium air reservoir system Electrical System - According to German Road Traffic Licensing Regulations (StVZO), with 2 five-chamber Aspöck Ecopoint 2 lights, 24V system with 2 x 7- and 1 x 5-pin sockets, side marker lights, 2 separate LED reversing lights at the rear, 1 LED interior light Tipping Body / Body Construction (fully welded interior) - Aluminium tipper body - Sidewalls: 30 mm thick plank profiles (2–3 mm), welded 600 mm wide - Floor: 8 mm high-wear resistant alloy (5383H34/HB 110) - Front wall: 4 mm reinforced, straight version - Rear wall: Universal door, straight version with 2 wing doors in 2/3-1/3 division with one grain chute, or optional in 1/2-1/2 version with one grain chute per door - Aluminium round profile sealing at rear doors (side and bottom) - Rear doors partially smooth aluminium-plated - Universal door operation: pneumatically automatic with separate lever lock - Aluminium swing-out rear canopy - 2 hold-down devices with rubber buffers on tipping body frame at the front wall Hydraulic System – Tipping Cylinder with Large Housing - Hydraulic cylinder mounted on the front wall, max. working pressure 150 bar, manufacturer Edbro - Approx. 2.5 m hydraulic hose and 1" loose half coupling - Tipping angle approx. 48° Accessories - 6 Parlok mudguards - Complete splash apron covering the entire vehicle width mounted to the underrun protection - Aluminium spare wheel holder - Right-side foldable side underrun guard - Large toolbox type 860 - Approx. 3 m aluminium ladder - 3 aluminium pivoting bows approx. 150 mm raised in the middle - Additional centrally mounted bow bracket for a total of 2 bows to increase loading width - Rolling tarpaulin with central light strip and separate reinforcements at wear points, approx. 660 g/m² quality, with roll tarp system, perimeter rubber cord at the rear closure of the tarp with two hooks to fix at rear pivoting bow - Walkway on chassis frame painted in chassis color - Tarpaulin quick release lock - Rear tarp closure with welded-in rubber seal for water ingress protection - Robust, foldable underrun protection with two towing eyes left and right incl. pin - 2 "Clear-Pass" splash guards on the fenders (EG standard) - Aluminium grain funnel with sack, mounted on the side of the frame - Holder for shovel, broom, and scraper above the axles Itodpfofi Nmusx Ab Ujr +€590 delivery charge Available in 50 m³ – 56 m³ Loading compartment length: 9,700 mm and 10,500 mm * Price varies according to equipment configuration

Stanje: novo, največja dovoljena obremenitev: 30.020 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 11.560 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.566 mm, prostornina tovornega prostora: 70 m³, skupna širina: 2.550 mm, skupna višina: 3.900 mm, Oprema: ABS, H&W Moving Floor Walkingfloor Semi-Trailer 70m³ Agricultural Version Availability: approx. 5 months from order receipt Moving floor system: # 15-plank system # Radio remote control Iodogimytjpfx Ab Ustr # 10 mm ribbed floor planks # Hydraulic connections at the front wall & by the landing legs Bodywork: # 30 mm aluminium hollow profile body # Continuous side wall welding (grain/agricultural version) # 2 crossbeams # Integrated grain discharge chute # Rear plate of the floor system, foldable downward # Swing door post, operable from below # Cleaning door in the front wall left # Rear inspection window Chassis & Axles: # SAF axles with 22.5-inch disc brakes # Wabco braking system EBS 4S/2M with RSS # Wabco ECAS air suspension system # 6 x premium tyres 385/65 R 22.5 on silver steel rims # 1st & 3rd axle with forcibly steered Tridec system # Galvanised steel chassis # Chassis colour: hot-dip galvanised Additional equipment & accessories: # Aspöck 24V lighting # 4 x LED work lights activated in reverse # 3.00 m aluminium access ladder

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, skupna masa: 1.100 kg, skupna dolžina: 6.000 mm, skupna širina: 2.400 mm, skupna višina: 2.600 mm, debelina izolacije: 50 mm, vrsta vhodnega toka: trifazni, Container shown in the pictures are in stock and available immediately. Viewing and collection possible. In this offer, we present Villex Multi Cube Nero containers, which can serve as office containers, sanitary containers, school containers, kindergarten containers, refugee shelters, living containers, or construction site containers. Dimensions: 6.0 x 2.4 x 2.6 m Delivery: Nationwide possible (Germany) Standard Features: Condition: New & Assembled Exterior color: White + Black (as shown in the photos) Exterior walls: 50 mm thick Area: 14.40 m² Weight: 1000 kg 1x Entrance door (205 cm x 105 cm) 1x Double window -> Single sash, fixed glazing, and with tilt function 1x Double roller shutter Isdpfxjr Hpk Sj Ab Ujtr Electrics: - 6x sockets, FL circuit breaker + fuse, surface-mounted wiring (PVC) We manufacture your container individually according to your wishes! Optional extras for an additional charge: - Custom dimensions, e.g. 7x3m, 4x2.4m, double containers, triple units, and more - Different window sizes - Various colors - Flooring colors - Practical forklift pockets - Air conditioning - Lighting - Roller shutters - Heating - WC, shower, toilet, washbasin - Kitchen - Plastered interior walls - And much more Delivery is usually carried out with our own vehicles. Payment can be made in cash upon delivery to our driver or conveniently in advance via PayPal or bank transfer. Delivery time for in-stock standard containers nationwide is approx. 1-2 weeks after order receipt, depending on the postal code area. We manufacture and deliver custom containers within 1-4 weeks. Collection and viewing by appointment at Heta Naturstein, Dortmunder Str. 90, 59427 Unna, during business hours by prior telephone arrangement. Tel: 02303/9599920 & 0176/32229377

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.636 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 60 m³, Chassis manufactured in self-supporting aluminium construction with corresponding reinforcements in the lower chord for particularly high stability and strength, aggregation chassis made of aluminium, 140 mm frame height! (max. 39t) Axles and Suspension "Disc Brakes 22.5" Jost axle assemblies 3 x 9 tonnes with DC air suspension, raising/lowering function, Wabco Smartboard, electronic brake pad wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axle separately liftable with traction aid (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension, Wabco Trailerpulse tyre pressure monitoring with ZF rim-mounted sensors. Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 as per manufacturer selection, Alcoa aluminium rims DuraBright-11, 75x22.5 ET 120, Kingpin bolted into a 10 mm thick plate. Landing Gear Aluminium drop leg landing gears, 2 x 10 t support load, with swivelling feet for air suspension. Brake System According to E.G. standards, two-line braking system, Wabco EBS electronic brake system with RSS (Roll Stability Support), spring-loaded brake system acting on two axles, operated at the rear, aluminium air reservoirs, premium modulator. Electrical System In accordance with German road traffic regulations (StVZO), with 2 Aspöck Europoint LED five-chamber tail lamps integrated in aluminium rear panel, 24-volt system with 1x 5-pin and 2x 7-pin sockets, with side marker lights in LED design, 2 separate LED work lamps at the rear, 2 LED work lamps at the height of the landing gear, 1 LED work lamp inside front left, operable from the outside. Iodpfx Abjfakkcs Uetr Body/Tipper Body "Fully Welded Inner Structure" Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn. Aluminium tipper body, side walls made of 30 mm thick aluminium plank profiles (2-3 mm), 600 mm wide, fully welded with upper and lower chord, plank profiles fully welded inside, floor as moving floor system mounted on 140 mm aluminium crossbeams, floor load approx. 7 t/m², crossbeams closely spaced (approx. 350 mm), aluminium front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special aluminium corner profiles in bevelled design, smooth rear wall in straight design with 2 aluminium swing doors 50/30 mm thick with 4 locking rods in a welded aluminium rear frame mounted with Teflon and stainless steel bearings, synchronically suspended aluminium sidewall in reinforced top chord with Kevlar curtain for full emptying, side brush seals and additional Kevlar side curtain, integrated discharge hopper with foldable cover plate at lower left rear, externally operable, inspection window rear left, 1 sample slide valve per rear door (2 pcs), service door front left. Hydraulics "Cargo Floor moving floor system in the floor with hydraulically actuated aluminium profiles on aluminium square profiles mounted on approx. 670 PE-HD sliders, approx. 6 mm floor thickness, hydraulic stroke approx. 200 mm, fixed half couplings at the front wall, separate hydraulic line connection option under the vehicle with fixed half couplings, line size NW 21, fixed half couplings with to-be-specified size and design, operating pressure 190 up to max. 240 bar, aluminium end pieces welded into the floor, electronic control at rear left with cable remote control in a lockable waterproof box. Accessories PVC mudguards with rubber flaps, aluminium spare wheel carrier, foldable side aluminium underrun protection

Stanje: novo, lastna masa: 12.900 kg, največja dovoljena obremenitev: 34.100 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.850 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 350 mm, vzmetenje: drugo, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 12.900 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm in length Iodpehlz R Sofx Ab Uotr - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractor units: 4x2, 6x2, and 6x4 Loading Platform: - Low-bed with external beams, extendable “SUPER LOW” design, approx. 6,850 mm in length - Low-bed with fixed hardwood flooring, approx. 40 mm thick, with mechanical locking device Rear Chassis: - Rear chassis with closed outer frame, chequer plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings, foldable to the outside - 1 pair of lashing rings recessed in the trough - 2 pairs of stake pockets for insertable stakes 100 x 50 mm in the external frame Pendulum Axle and Tyres: - "PENDULUM AXLE", all axles hydromechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and safety locking pins for securing in raised position - Axles painted with two layers of single-colour 2K paint in “FAY-Grey-34-0260” - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Accessories: - Preparation for the installation of bolt-on container locators for 1 x 20ft or 1 x 40ft container on the outer girders - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel - Yellow-red air couplers on the galvanized front connection bar - 4 wheel chocks - Remote steering from front and rear, operable via wired remote control with push buttons, with single-track alignment control - Hydraulic connections from gooseneck to low-bed with multi-coupling instead of screw couplings - Electro-hydraulic power unit - White reflective tape in accordance with EU regulations on sides, extension, and rear - European reflective plates (red-yellow) on the rear of the trailer - One bracket on each side of gooseneck and rear plate for warning panels, including socket - 6 pairs of threaded blocks between the lashing rings under the top chord on outer beam for mounting screw-on RUD Rings VLBG-4 - Detachable ALU side boards and rear board on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized insertable stakes are removable (body length approx. 2,560 mm) - Gooseneck rear upper area covered with removable cover - 5 pairs of stake pockets for insertable stakes 100 x 50 mm in the outer frame of the loading area - Folding extensions, approx. 230 mm per side - 2 pairs of bolted RUD Rings VLBG-4 M24 (LC 8,000 daN) - 1 pair of steel ramps for bridging the mounting hooks of the low-bed - Anti-skid sand layer painted on loading surface - 80 km/h speed stickers at rear and both sides - Spoon boom trough at rear chassis closed at rear with plug-in plate - Four extendable warning panels approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for rear axle steering in addition to cable remote, with indicator lights on receiver for alignment control - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard NLGI-2 grease - Load pressure gauge for determining axle loads - HRM Metallisation (High Resistance Metallisation) of outer frame - Complete steel structure shot blasted, then all defined visible areas metallized and finished with ZINACOR 850 (zinc 85% - aluminium 15%) hot galvanizing

Stanje: novo, največja dovoljena obremenitev: 33.440 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.000 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 2.900 mm, skupna širina: 2.550 mm, skupna višina: 3.900 mm, Oprema: ABS, SCHWARZMÜLLER 3-Axle Timber/Stake Semi-Trailer - New Vehicle IMMEDIATE AVAILABILITY!! Tractor Unit Data and Equipment - 4,500 mm maximum distance from tractor unit front edge to king pin center - 2,240 mm minimum clear front space from king pin center - 1,900 mm max. rear swing radius - GCVW (Gross Combination Weight, permitted): 44 t for short and long haul, or with special permit - GVW (Technical): 39 t - Axle group load (technical): 27 t - King pin load (technical): 12 t Dimensions - Frame length: approx. 13,000 mm - Overall width: max. 2,550 mm - Loading height front/rear: approx. 1,340 mm - Trailer in level position at approx. 1,150 mm coupling height - Overall loading height: approx. 1,510 mm Construction - Welded steel frame construction - Lightweight high-strength fine-grain steel chassis - Straight frame design, all stanchion holders mounted on the chassis - Frame height at front: approx. 190 mm (without stanchion holders) - Replaceable 2" king pin - Chassis for coupling height (unloaded) approx. 1,150 to 1,250 mm with air suspension tractor unit - 12 mm phenolic plywood decking between longitudinal beams, bolted, extended to front up to landing legs (protects tractor) and at rear above running gear, flush with top edge of crossmembers - Landing legs, 2 x 12 t, single-side operation (right), force equalization - Reinforced crossbeam for loading/unloading while uncoupled Axle and Suspension - 3x SAF Intradisc Plus Integral axles, disc brakes Ø430 mm (22.5"), 9 t/axle load, reinforced axle bodies, off-road version - Axle spacing: 1,310 + 1,410 mm - Axle lift on 1st axle, automatically raises/lowers dependent on load, with forced lowering and speed-limited start-up assistance (operated via cab button and brake pedal sequence) - 6 x 385/65 R 22.5, 164K steel rims 11.75 x 22.5, ET120 mm, silver Braking System - Brake system as per EC directives 71/320 or ECE R13 - Dual-circuit air brake system as per factory specification - EBS system 2S/2M, one axle sensed - RSS (Roll Stability Support) - Spring-loaded parking brake on 2 axles - Aluminum air tanks - Brake/air connections with 2 individual coupling heads (yellow/red) - EBS/ABS socket at front Air Suspension - Air suspension with raise/lower function - Automatic level set to programmed drive height above 15 km/h - Air bag diameter 360 mm Telematics Itodpfx Absn Hrg Rj Uor - SWIT Schwarzmüller Intelligent Telematics, "LOCAL TRAC" package - Axle load display via EBS CAN bus signal, information shown on cab display Superstructure - Extra-strong steel headboard, approx. 2,500 mm high, with 2 strong central supports, top corners chamfered approx. 300 mm/45° - Stanchion holders mounted/adjustable, spacing: approx. 600 mm, then every 2,400 mm - 6 ExTe stanchion holders type 144, bolted clamp fitting - Stanchion tilt approx. 0.8° inward (suitable for sawn timber transport) - 6 pairs ExTe stanchions 144-S with bolted fitting, telescopic (2-piece), max. load per pair 7 t, coated in original signal orange - Telescopic key for stanchion operation - Stanchion load height: max. approx. 2,800 mm - 8 claw guard plates, approx. 200 mm long, fitted between stanchion holders (side) - 6 pairs lashing hooks on stanchion holders Lighting - 24V lighting system as per EC directive 76/756/EEC - 2 full LED five-chamber tail lights "Aspöck" with integrated control unit - 2 LED front position lights - 2 rear LED marker lights - Flashing LED side marker lights, activated via indicator signal - 2 license plate lights - 2 x 7-pi

Stanje: rabljeno, Leto izdelave: 2023, Suction hose system Perrot, Ø150 mm, 5m Jurop vacuum compressor PNR 155 (15,200 ltr) plastic mudguards for agricultural use. Professional filling aid NW 200 front / swivel element rear. Wedge flange slide valve 6 inch left front, wedge flange slide valve 6 inch right front. Mounting bracket for Itedpjr T Rfrofx Ab Uer

Stanje: novo, največja dovoljena obremenitev: 32.600 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, skupna širina: 2.550 mm, Leto izdelave: 2025, Oprema: ABS, PAVIC OptiPa PRSH 27 flatbed semi-trailer for timber and long material transport. Iodpfx Asn Hrrieb Ujtr * Chassis length approx. 13,510 mm (front frame to front frame) * Chassis width approx. 2,540 mm (outer frame to outer frame) * Robust steel front wall, approx. 2,500 mm high * 16x OptiPa A7 one-piece aluminium stakes * Steel floor with 4/6 mm chequer plate covering * Technically permissible gross weight: 43,000 kg * Ride height unladen approx. 1,400 mm with a fifth wheel height of 1,200 mm * Maximum fifth wheel load approx. 16,000 kg * 2" kingpin, SAE standard, replaceable from underneath * 16x OptiPa quick-lock system recessed in the outer frame and 8x stake pockets along the centre for plug-in stakes distributed over the entire length * 3x 9 t axles with large disc brakes and air suspension unit, each axle load 9 t, total lift approx. 180 mm * Lifting and lowering device with rotary slide valve * Axle lift on the first axle, automatic function with starting aid * Smartboard/TIM/Infocenter * EBS braking system, Knorr or Wabco brand (at our discretion), with Roll Stability Program * Premium tyres 385/65 R 22.5 * LED work lights * LED lighting system * 2x toolboxes * KTL coating with zinc phosphating plus powder, highest corrosion protection (subject to powder coat colour availability) For further information, please do not hesitate to contact us.

Stanje: rabljeno, lastna masa: 6.227 kg, največja dovoljena obremenitev: 29.773 kg, skupna masa: 36.000 kg, prva registracija: 10/2024, dolžina tovornega prostora: 10.540 mm, širina tovornega prostora: 2.440 mm, višina nakladalnega prostora: 2.100 mm, prostornina tovornega prostora: 54 m³, vzmetenje: zrak, barva: siv, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, elektronski program stabilnosti (ESP), Errors and prior sale excepted. All information provided without guarantee. Iedpfxevih D Ro Ab Uotr

Stanje: rabljeno, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2011, naslednji pregled (TÜV): 01/2026, prostornina tovornega prostora: 48 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2011, Oprema: ABS, RENDERS 3-axle agricultural tipping container chassis with 48 cbm aluminium tipper body Iodpfxjwpw D Es Ab Uotr First registration 2011 Steering system: X-Steering, 1st and 3rd axles with forced steering 1st axle: LIFT AXLE Tyres: low-pressure tyres / agricultural tread, 6 x 445/65 R 22.5 (road tyres in 385 size available on request) SAF axles with disc brakes Air suspension with raise/lower function WABCO trailer EBS HYVA tipping cylinder, 190 bar low pressure Automatic tipping lowering function Aluminium tipper body, 30 ft Capacity: 48 cbm Internal profile joints fully welded, with reinforcement plates in lower area Overhung pendulum tailgate with grain chute Pneumatic locking Additional tension locks Roof roll tarp Very well maintained condition, immediately available