Drugo Delovna Platforma nakup rabljenega (68)

Stanje: novo, številka stroja/vozila: AHW BJT DP2700, lastna masa: 505 kg, največja dovoljena obremenitev: 2.195 kg, skupna masa: 2.700 kg, dolžina tovornega prostora: 2.800 mm, širina tovornega prostora: 1.300 mm, Takoj na voljo za prevoz dvižnih ploščadi ali mini bagrov \ Transportni priklopnik za stroje Cargo Digger Plant 2 280x130x15cm 2.700kg, model z LED osvetlitvijo \ Tandemski nizkopodni priklopnik z V-podvozjem - vzmetena zavora - pnevmatike 14" - višina nakladalne površine 38 cm - pocinkovana jeklena korita z perforiranim jeklenim dnom, zanke za pritrjevanje po DIN - nameščen nosilec za žlico - nagibne in premične jeklene rampe, podporno kolo..... Dogovorite se za termin prevzema po telefonu 02182 699 0 690 od ponedeljka do petka Cgjlhcsyhl Sgodw Dsp 02.26 \ 543-0110 VERSION29002

Stanje: novo, lastna masa: 614 kg, največja dovoljena obremenitev: 2.886 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.800 mm, širina tovornega prostora: 1.300 mm, višina nakladalnega prostora: 200 mm, prostornina tovornega prostora: 0,7 m³, barva: srebrn, gradbena višina: 1.970 mm, delovna širina: 1.790 mm, Reverse automatic system, hot-dip galvanization, extremely robust construction, tie-down perforated floor, LED lighting, jockey wheel, bucket holder, * AVAILABLE IMMEDIATELY * extremely robust build / perforated tie-down floor / LED lighting / jockey wheel / bucket holder Cjlju Hrg Ujhcdw Degp TECHNICAL DATA: - Brand: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery trailer - Vehicle condition: New - First registration: Without initial registration - TÜV/Inspection: 2 years from initial registration - Internal dimensions (LxWxH): 280 x 130 x 20 cm - External dimensions (LxWxH): 465 x 179 x 197 cm - Loading height (floor): 38 cm - Gross vehicle weight: 3,500 kg - Unladen weight: 614 kg - Payload: 2,886 kg - Chassis: Low loader (wheels beside the platform) - Tyres: 165R13C - Suspension: ALKO rubber spring axle - Jockey wheel: Yes - 100 km/h approval: Optional, retrofittable DESCRIPTION: - Robust steel fenders with anti-slip perforated profile - Reinforced perforated steel plate sides inside - 18mm phenolic plywood centre deck, anti-slip and waterproof - Extremely stable welded steel frame - Frame fully hot-dip galvanized by immersion bath - Chassis with two additional longitudinal beams under the loading platform - Single perforated steel ramps, galvanized, adjustable, L=1.62m - Sturdy ACME locking system: closes silently, loading ramps secured by safety clamp locks, rubber buffers dampen noise - Very low chassis for reduced ramp angle - Excavator bucket holder - 10x tie-down lashing points on the side wall (1000 daN/kg), TÜV certified - Flexible choice of tie-down points with perforated steel floor - Maintenance-free axles and damping systems designed for extended journeys and heavy loads - Spare wheel easily accessible, mounted on side wall - Reverse automatic system - ALKO overrun hitch and parking brake - Coupling head made of cast steel with integrated high security ALKO lock - Highly stable reinforced V-drawbar - 13-pin plug - Complete LED lighting: extremely bright, durable and reliable - Reversing light - Integrated rear fog light - Robust protection for rear lights - Heavy-duty jockey wheel - 5-year chassis warranty RETROFITTABLE ACCESSORIES (please inquire!): - TracStrap load securing system - Excavator bucket cage - Lashing straps - Storage box - Winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing! Descriptions and images are copyright protected!! Over 800 trailers available immediately in stock! We have been your expert dealer & workshop for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years – repairs and nationwide delivery in Germany available for an additional charge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt Subject to errors, changes, and prior sale.

Stanje: kot nova (razstavni stroj), številka stroja/vozila: AHW BR 39033, skupna masa: 3.000 kg, Leto izdelave: 2022, ANHÄNGERWIRTZ, your online pick-up market for new trailers, offers top brand manufacturers! - Over 700 new trailers in stock - Over 130 used trailers always available - Non-binding example: Machine Transporter MT 3080 GD 308x152cm 3000kg, low-bed tandem axle, V-drawbar, rear tailgate with lift assist... - 25cm side panels - Ideal angle of the loading ramp Cgelsi R Sf Ajhcdw Dop - Low loading height - Hot-dip galvanized - Includes ramp and support insert - Support wheel installed as standard Many variants available for immediate delivery Sales & telephone order hotline: MON. - FRI. 08:00 - 12:30 & 14:00 - 18:00 Or 24/7 online in our trailer shop All content and images are subject to copyright - Brand logos protected 03/25 39033

Stanje: rabljeno, največja dovoljena obremenitev: 1.007 kg, skupna masa: 1.500 kg, konfiguracija osi: 1 os, prva registracija: 03/2026, dolžina tovornega prostora: 3.070 mm, širina tovornega prostora: 1.830 mm, višina nakladalnega prostora: 100 mm, skupna širina: 1.960 mm, skupna višina: 925 mm, A66 GW26NG000373 Homologacija za 100 km/h Platformni priklopnik Cgelhjyq U Enocdw Dep Oporno kolo Nakladalne rampe Pridržujemo si pravico do napak in predhodne prodaje

Stanje: rabljeno, največja dovoljena obremenitev: 2.186 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, prva registracija: 02/2026, dolžina tovornega prostora: 3.005 mm, širina tovornega prostora: 1.400 mm, višina nakladalnega prostora: 200 mm, skupna širina: 2.035 mm, skupna višina: 2.130 mm, A45 GW26G000189, Cgelhcdweyqdqmo Dsp Prevozni priklopnik za gradbeno mehanizacijo, proizvajalec STEMA, tip BMAT .2, Skupna masa: 2.700 kg, s kovinskimi vstopnimi rampami, z vzmetno zavoro, do 100 km/h, 3,01 m x 1,40 m Vgrajeni blažilniki za 100 km/h * Tandem nizek nakladalni priklopnik, po izbiri s STEMA V-drogom ali centralno cevjo * Varjen in v vročem cinku potopljen šasija iz masivne pločevine * Prednja in stranska stena iz 3 mm debele, varjene črne pločevine * 20 cm visoke privarjene stranske stranice * Celotna talna površina iz protidrsne vezane plošče (debelina 18 mm), po želji z dodatnim aluminijastim rebrastim podom (debelina 3 mm) * Pohodne blatniki iz pločevine za lahek vstop in izstop * 2 vzdolžna nosilca za optimalno porazdelitev obremenitve ... in še več. Pridržujemo si pravico do napak in vmesne prodaje.

Stanje: rabljeno, največja dovoljena obremenitev: 2.775 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, prva registracija: 02/2026, dolžina tovornega prostora: 3.530 mm, širina tovornega prostora: 1.650 mm, skupna širina: 2.435 mm, skupna višina: 2.130 mm, A15 GW26MG00273 Cgolhcoym Ihzedw Dsp Prevoznik gradbenih strojev, proizvajalec A, tip BMAT, skupna teža: 3.500 kg, nizkopodni priklopnik, s inercijsko zavoro, 100 km/h, z aluminijastimi rampami, 3,53 m x 1,65 m ...in še veliko več. Pridržujemo si pravico do napak in predhodne prodaje.

Stanje: rabljeno, največja dovoljena obremenitev: 949 kg, skupna masa: 1.300 kg, konfiguracija osi: 1 os, prva registracija: 02/2026, dolžina tovornega prostora: 4.010 mm, širina tovornega prostora: 188 mm, višina nakladalnega prostora: 110 mm, skupna širina: 2.450 mm, skupna višina: 860 mm, A13 GW2616429 Multitransporter 4018, Proizv. TEMARED, Tip DMC, . , Skupna teža: 1300 kg, 400x184cm, z inercijsko zavoro, 100 km/h (dodatna oprema), s zložljivo nakladalno rampo (dodatna oprema), nizkopodni, z možnostjo spuščanja Nakladalna višina 400mm Pridržujemo si pravico do napak in vmesne prodaje. Cgolhcdweym Igds Dsp

Stanje: rabljeno, največja dovoljena obremenitev: 2.775 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, prva registracija: 02/2026, dolžina tovornega prostora: 3.530 mm, širina tovornega prostora: 1.650 mm, skupna širina: 2.435 mm, skupna višina: 2.130 mm, A15 GW26NG00315 Cgjlhcdeym Iftow Dep Prevoznik gradbenih strojev proizvajalca STEMA, tip BMAT, skupna masa: 3.500 kg, nizkopodnožni priklopnik, vztrajnostna zavora, 100 km/h, z aluminijastimi rampami, 3,53 m x 1,65 m ...in še veliko več. Pridržujemo si pravico do napak in vmesne prodaje. Višina nakladanja 500 mm

Stanje: rabljeno, največja dovoljena obremenitev: 2.649 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, prva registracija: 02/2026, dolžina tovornega prostora: 4.005 mm, širina tovornega prostora: 1.800 mm, skupna širina: 2.435 mm, skupna višina: 2.130 mm, A14 GW26GA00002 Prevoznik gradbenih strojev, proizvajalec STEMA, tip BMAT .2, skupna masa: 3.500 kg, nizkopodni priklopnik, z vztrajnostno zavoro, 100 km/h, s kovinskimi rampami, nagibni, 4 m x 1,80 m ...in še veliko več. Pridržujemo si pravico do napak in vmesne prodaje. Cslhcdwoym Ifae Dogp

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2476988, skupna masa: 1.635 kg, dolžina tovornega prostora: 1.300 mm, širina tovornega prostora: 700 mm, skupna dolžina: 5.960 mm, skupna širina: 1.780 mm, skupna višina: 2.160 mm, barva: bela, Leto izdelave: 2013, Tehnični podatki Leto izdelave: 2013 Pogon: Električni Delovna višina: 13,50 m Višina platforme: 11,50 m Cslhcsx Tn Ddedw Dogp Stranski doseg: 9,10 m Širina stabilizatorjev: 3,8 m / 4,20 m Območje vrtenja: neskončno Upravljanje: proporcionalno Dimenzije platforme: 0,70 m x 1,30 m Skupne mere (D x Š x V): 5,96 m x 1,78 m x 2,16 m Nosilnost košare: 215 kg Zasuk košare: 90° Teža: 1.635 kg Plezalna sposobnost: 25% Popolnoma delujoče Tehnično pregledano Običajni znaki uporabe Dostava po dogovoru Najem po dogovoru

Stanje: kot nova (razstavni stroj), številka stroja/vozila: AHW MT3080, skupna masa: 3.000 kg, dolžina tovornega prostora: 3.080 mm, širina tovornega prostora: 1.520 mm, TRAILERWIRTZ, the online pick-up market for your new trailer, offers strong brand-name models ready to take away! Celhcdjyrbnfew Degp - Over 850 new trailers in stock - Over 100 used trailers always available - Over 150 vehicle transporters – popular models with extensive accessories in stock Non-binding example: exhibition trailer ready for collection Brenderup machine transporter MT 3080 GD 308x152cm 3000kg, low loader with tandem axle, V-drawbar, loading ramp as rear gate with supporting leg 13-pin plastic connector, tires: 14 inches Jockey wheel, 6 internal lashing rings (400 daN) Excavator bucket rest Non-slip mudguard coating and step board Hot-dip galvanized, high-quality durable screen-printed floor Sturdy metal chocks, position lighting Recessed lights Spare wheel incl. holder under bucket rest The largest selection of transporters available immediately Sales by telephone order during business hours or 24/7 through our trailer shop Images and description in this advertisement are protected by copyright – logos are trademark protected 03/26 39033

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 06/1998, dolžina tovornega prostora: 4.300 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 850 mm, 2-osna BlomenRöhr platforma SDAH 8,5T Leto izdelave: 06.1998 Proizvajalec: BlomenRöhr Listnato vzmetenje Pnevmatike: 215/75 R17 Dolžina: 6240 mm / Višina: 2360 mm Brez tehničnega pregleda (TÜV) Dodatna posebna oprema, podatki ali slike na zahtevo! Podatki brez garancije/možne napake! Podatki na internetu so nezavezujoči opisi in ne predstavljajo zagotovljenih lastnosti. Prodajalec ne odgovarja za napake, tipkarske napake ali napake pri prenosu podatkov. Pridržujemo si pravico do sprememb. Stalni odkup in prodaja ter prevzem v račun in najem komunalne tehnike / vozil za zbiranje in čiščenje kanalov, Celhsv Ridhscdw Degp storitev odvoza tekočih in nevarnih odpadkov.

Stanje: novo, največja dovoljena obremenitev: 16.500 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal ETÜ-TAR 21 Tandem - Low-loader / Flatbed Trailer, drive-over capable Ref No.: 27963 NEW VEHICLE incl. COC * GVW: 21t, Payload: 16.50t, galvanized chassis * Available end of March 2026 * Flatbed design with 400 mm high front wall, ramp secured by ramp locking rods and diagonal bracing * Version: 21t GVW, reinforced frame and axle, axle spacing 1,810 mm * Bed height approx. 910 mm loaded / approx. 940 mm unloaded * 7,000 mm loading area with 400 mm high front wall * Ramps extended: 3,000 mm single-piece, hot-dip galvanized ramps with galvanized gratings * Ramp lift with vertically mounted, adjustable springs for easy single-person operation * Load securing package: * 4 pcs. UVV drop lashing rings (LC 8,000 daN) mounted in the existing 45° outer frame hole pattern, positioned approx. 1m from front and rear crossmembers * 10 pcs. UVV lashing rings, retractable, LC 3000 daN, in existing hole matrix in the outer frame * 2 UVV lashing rings each, recessed at front and rear of the crossmember (LC 10,000 daN) * Additional lashing options via holes (Ø 50 mm, LC 1,200 daN) in front and rear crossmembers * Prepared for retrofit of container locks * Softwood floor, 50 mm thick * Air suspension, Gigant axles incl. EBS 2S/2M, * Raise/lower function * 235/75R 17.5 (8x) twin tyres with tyre pressure monitoring sensors * 1 plastic toolbox in front of the front wall on the right in direction of travel * LED lighting system Cgelhcdwsyqdl Rj Djp * 7-pin socket at the rear, prewired for extended length lighting with rear light (58R) and ground * 2 LED reversing lights at the rear * Flashing side marker lights * Oversize warning panel * 1 removable LED beacon incl. holder and installation * Folding supports at the rear, front support leg with geared winch ---- Hire purchase example from our partner MMV Leasing: €655/month net for 60 months with no down payment and "0" euro residual value. Other terms with/without down payment/residual value available! We are a MüllerMitteltal dealer ----* Our opening hours * Mon–Thu: 08:00–17:00 * Fri: 08:00–15:00 * Outside opening hours by appointment * We speak German, English, Russian, Polish, French * Leasing, financing, trade-in available

Stanje: rabljeno, največja dovoljena obremenitev: 11.700 kg, skupna masa: 14.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2018, dolžina tovornega prostora: 3.200 mm, širina tovornega prostora: 1.800 mm, Leto izdelave: 2018, Oprema: ABS, Dobro vzdrževana prikolica za izmenljive zabojnike Oprema: Gigant osi Ročna opora Aluminijasti blatniki Stanje pnevmatik cca: 50% Celheykhhvscdw Dogp Za vprašanja glede opreme prosimo pokličite. Napake in predhodna prodaja pridržani!

Stanje: rabljeno, skupna masa: 2.000 kg, prva registracija: 08/1995, Prikolica z ogrodjem za reklamne ponjave ali za prevoz stvari Lokacija: Im Erlenkamp 15 Cgsleynvdmshcdw Dsp

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem | Low Loader | Platform | Trailer Available immediately | Reference number for inquiries: 11611 | Delivery to your address possible * We are happy to provide you with an individual offer * ---- * Gross weight: 14.4 t, Payload: 10.95 t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27 m x 2.47 m platform with galvanized 400 mm front wall * Excavator bucket rest made of hardwood, bolted to the front wall * Floor height unladen 930 mm / laden 870 mm * One-piece ramps with hot-dip galvanized grid surface, slip-resistant design, retractable down to approx. 20 mm. Secured by retaining bar and diagonal brace * Ramp lifter with upright, adjustable springs for easy one-man operation * 4 UVV drop lashings (LC 6300 daN) * Perforated outer frame (45°-bent with hole pattern for lashing equipment, lashing force per lashing point LC 2000 daN at a minimum spacing of 480 mm. Installation of drop lashings LC 3000 daN at approx. 600 mm spacing possible), closely spaced cross-stiffeners, high-ribbed front and rear closure with rear loading ramp, hot-dip galvanized * 10 UVV lashing rings LC 3000 daN retractable in the existing hole grid in the outer frame, additional * Additional lashing options via bore holes (Ø 50 mm, LC 1200 daN) in the front and rear crossmembers Cgjlhcdjyndh Hew Dop * Toolbox in front of the front wall * Side marker lights with indicator function * 50 mm thick softwood floor. Chassis hot-dip galvanized * Height-adjustable landing gear at the front, folding supports at the rear * Retrofitting of 2 container locks possible * Drawbar with 40 mm towing eye (hot-dip galvanized), height adjustable, 50 mm eye possible on request * 1 removable LED warning light at the rear * ---- * Leasing, hire purchase, financing, trade-in possible * Example: 510 euros for 60 months’ term, no down payment, no final installment * ---- * Our opening hours: * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 Outside of business hours, viewings possible by appointment. We speak German, English, Polish, and French Leasing, financing, trade-in possible

Stanje: rabljeno, največja dovoljena obremenitev: 31.250 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2014, naslednji pregled (TÜV): 03/2026, dolžina tovornega prostora: 9.010 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Leto izdelave: 2014, Oprema: ABS, 4-Axle Schwarzmüller T4 Low Loader Trailer VIN: EZ346388 Chassis / Attachments: * Air suspension * Saddle height: 1,150 mm * 4 x SAF axles with drum brakes * Tyres: 235/75 R 17.5 * Tyre tread depth: 1.~60% 2.~60% 3.~60% 4.~50/20% Superstructure: * Total length: 9.1 m * Extendable side extensions (up to 3.0 m) * Ride height: 0.90 m * Hydraulic loading ramps with lateral displacement * Multiple lashing points available Weights: * Gross weight: 40,000 kg * Unladen weight: 8,750 kg * Payload: 31,250 kg Miscellaneous: * German vehicle * 1 previous owner * Inspection (HU) & safety check (SP) valid until 09/2026 * New inspection available on request New roadworthiness inspections, safety checks, or load reduction/increase are available upon request. We are happy to assist in obtaining export or transit number plates, and we can also arrange delivery of your purchased vehicles within Germany. Please contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for typographical or printing errors. Subject to prior sale, changes, or inaccuracies. ---- Who are we? Leible Nutzfahrzeuge is a family-owned business based in Kehl am Rhein. With many years of experience in the reconditioning and sale of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge specializes in the sale of new and used commercial vehicles. On 11,000 m², you will find a wide selection of vehicles. Our company philosophy is defined by fairness and integrity. Customer satisfaction is very important to us, which is why we offer an excellent all-round service package and provide a competent contact person to support you with the purchase or sale of vehicles. Cgslhcdeykfpwew Dop See for yourself! Our services for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Organizing special transport We are happy to assist you with organizing special transports. Temporary/export registration plates We are happy to help you procure export or short-term plates.

Stanje: novo, največja dovoljena obremenitev: 20.500 kg, skupna masa: 27.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TR 27.0 flatbed: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lifting and lowering function, including RTR function * 1st axle liftable * Last axle as trailing steering axle with electro-pneumatic steering lock via reverse PIN (lock of the trailing axle from the tractor for maneuvering purposes – no installation required on the truck side – connected via PIN 10 in the 15-pin connector, for maneuvering only, not for public road use) * SmartBoard control box as an infotool with pressure sensors for total axle load display * Tire pressure monitoring with display option in the truck via EBS signal, no installation required on truck side * Fixed center drawbar with 50 mm flanged towing eye (loaded 900 mm, height adjustment at head plate) * Mechanical landing gear at the front, mechanical swiveling supports at the rear of the chassis * Hydraulic flow divider * Continuous side walls (without center stanchion) up to the approach slope * Folding rear stanchions * Steel rear wall slid in front of the rear stanchions * Mechanically adjustable warning panel kit at front and rear * Toolbox made of galvanized sheet steel – black powder-coated – approx. 650 x 300 x 600 mm, mounted right side * 15-pin electrical connector * LED tail lights * Removable LED beacon including bracket and installation * 2 x LED reverse lights at rear of vehicle (activated via reverse gear) * Flashing LED side marker lights * 60 mm larch/Douglas fir wooden floor * 400 mm plug-in steel front wall * Perforated outer frame, approx. 45° bent, with provisions for mounting 3 t drop lashing brackets * In each corner 1 x 10 t lashing ring, additionally on each side 2 x 10 t and 3 x 6.3 t lashing rings Cgolhcer Dpzxjdw Dsp * Various holes for 1.2 t lashing options in front and end crossmembers * Hydraulic one-piece loading ramps, approx. 3,000 x 720 mm, mechanically adjustable laterally * 4-section hydraulic control block for possible retrofitting of hydraulic ramp sliding * Chassis, drawbar, front wall, mechanical rear supports, loading ramps hot-dip galvanized * Axles, air tanks, flanged towing eye, and front landing gear painted in a shade of black * Hydraulic flow divider in the trailer (for truck-side hydraulic pump capacity of over 40 l/min up to 120 l/min) * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from week 13/2026 * Sample pictures (photos of the vehicle may differ due to special equipment)

Stanje: novo, največja dovoljena obremenitev: 16.400 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2024, * T3 Profile 30.0: * EBS-E (Electronic Braking System) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11-ton BPW Eco axles * Air suspension with lift/lower system * SmartBoard as trailer infotool with pressure sensors for axle load display per axle group * Side underrun protection * Mechanically adjustable warning panels front and rear * Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, each with spray protection * Folding (hot-dip galvanized) lid for the toolbox on the bogie platform * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm (black powder-coated) mounted right side * 15-pin electrical connector * LED lighting 12/24 V * LED beacon (removable) at rear * Side marker lights with indicator function * Drawbar with 40 mm towing eye and height adjustment via traction spring and turnbuckle * Tire pressure monitoring system with display option in truck via EBS signal (no truck-side installation required) * Rubber lining on folding ramps as well as on the access slope, left and right (approx. 860 mm long) * Rubber lining on the longitudinal beams from front to rear crossmember * Hardwood floor on the running surfaces of the low-bed platform * Each side with 4 stake pockets, with simultaneous 2-ton lashing capacity * Load securing package consists of: 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and integrated in the outer frame—in the corners 13.4 tons, elsewhere 10 tons * 6 pairs of mechanical folding outriggers for total width of 3 meters (not possible in rear slope) * Board holder under the loading area, lengthwise * Roller stop raised in front of front crossmember with 1 x 6.4-ton lashing eye on each side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load-holding valves * Hydraulic lateral ramp shift * Hydraulic rear support (single-stage cylinder) * Hydraulic flow divider in trailer (for hydraulic pump flow in truck over 40 to max. 140 l/min) * Hydraulic control block splash-proof * Two-line hydraulics * Platform over kingpin: approx. 1,960 x 2,520 mm * Rear platform: approx. 6,500 x 2,520 mm (including 860 mm access slope) * Loaded deck height approx. 890 mm +/- 20 mm (air suspension) * Chassis, bogie, roller stop, folding width extensions & loading ramps hot-dip galvanized * Axles, turntable, drawbar, air tank, etc. painted black * Loaded height: approx. 890 mm +/- 20 mm Celoq Dyvcshcdw Djgp * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from calendar week 20 of 2026

Stanje: rabljeno, največja dovoljena obremenitev: 643 kg, skupna masa: 850 kg, konfiguracija osi: 1 os, prva registracija: 05/2025, naslednji pregled (TÜV): 05/2027, skupna širina: 1.960 mm, skupna višina: 600 mm, Welcome to DreamCars Essen. In this advertisement, we are offering you a NEARLY NEW vehicle!!! BARELY USED ---- * First registration: 05/2025 * TÜV/HU/AU (MOT/Inspection/Emissions): valid until 05/2027 * 1 previous owner ----Vehicle Dimensions and Weight: * Gross weight: 850 kg * Unladen weight: 207 kg * Payload: 643 kg * Overall length: 3250 mm * Overall width: 1960 mm * Overall height: 600 mm ----As of today, we also offer you the option to arrange financing or leasing directly through us. For more details about the terms, please contact us by email or phone. ----Our offer and service for you: * Warranty of up to 24 months available at additional cost * New TÜV inspection possible on request * Nationwide delivery within Germany available for an additional fee * Video/photo documentation can be sent via email or WhatsApp * Registration services available (export plates, short-term plates, etc.) * We also offer trade-in or direct purchase of your used vehicle Cgjloxpqg Rohcdw Dop * Do you want to retrofit or add special extras to your vehicle? -> No problem * Free pickup from the train station (20-30 km distance) ----Business hours: Mon–Fri: 10:00 am – 6:00 pm, Sat: 11:00 am – 5:00 pm----Visit our website for more information ----Specifications, errors, and prior sale are subject to change----

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-R 14.4 ----Brake System: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm up to 2,250 mm * 40 mm flange towing eye ----Lighting / Electrical: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12 / 24 V * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox mounted externally at the front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Trapezoidal-profiled, fold-down steel side walls with drop-side spring assists * Steel rear wall, can be stowed between the ramp holders when not in use, inside in front of the bulkhead * Bolted rear stanchions * Rear drive-on slope approx. 860 mm ----Load Securing: * Perforated outer frame, edged at approx. 45 degrees with 2 t lashing capacity every 480 mm * Installation of 3 t fold-down lashing rings possible every 600 mm * 1 x 6.3 t lashing ring at each front and rear corner * Various holes for 1.2 t lashing options in bulkhead and rear crossmember ----Ramps: * One-piece mechanical grating drive-up ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (collapsible down to 20 mm) Csljq Dyvyehcdw Dsgp ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, rear wall, tailgate, and drive-up ramps * Side wall color in RAL 9010 pure white * Painting of side walls in any RAL color available at extra cost ----Info: * — Reinforced and certified body according to EN 12642 XL including load securing certificate — * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 31.900 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, T 4 Profi 40.0 ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release for spring-actuated cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lowering function and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and continuously adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display option in truck dashboard via EBS signal – no installation required on truck * SmartBoard as infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED taillights * Removable LED beacon at rear ----General attachments: * Warning plates front & rear * 2 x toolboxes made of galvanized, powder-coated sheet steel approx. 650 x 300 x 600 mm, right side * Closed single plastic mudguards at front * Straight steel spray suppression panels at rear, each with spray suppression * Side underrun protection ----Low-bed platform: * Turntable/platform extension by 520 mm with 45° corners and 3 recessed storage compartments incl. lids and lockable * Flooring on turntable platform made of 50 mm softwood; on low-bed platform made of 60 mm softwood * 20 mm rubber covering instead of timber in drive lane area with a well length of 6,780 mm including sloped ramp * Rubber coating on the ramp left and right, approx. 860 mm length * 4 stake pockets per side (stakes not included) with simultaneous 2 t lashing point capability ----Chassis: * Chassis made of high-strength fine-grain steel ----Load securing (Lasi package): Turntable/platform: * 2 pairs of 13.4 t lashing eyes in outer frame of turntable/platform Low-bed: * 4 pairs of 10 t lashing rings per side on the outer frame, foldable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings at rear on each side ----Ramps: * Rubber covering on foldable access ramps * Hydraulic folding ramps with hydraulic tip extension approx. 4,650 x 720 mm * Hydraulically lateral ramp shift & load-holding valves ----Rear support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outriggers for 3 m overall width (not on rear bevel) * Widening boards stowed on left side compartment Cgslhcdsylfvmsw Dep ----Excavator boom trough: * Excavator boom trough above rear axle to end of slope approx. L=2,100 mm x W=740 x D=190 mm * 2 pairs of 6.4 t lashing rings at sides in excavator trough ----Hydraulics: * Hydraulic flow divider in trailer (for truck hydraulic pump outlet above 40 up to max. 120 ltr./min.) ----Loading dimensions: * Rear loading platform: approx. 6,780 x 2,520 mm (incl. 860 mm ramp) * Platform above turntable: approx. 2,990 x 2,520 mm ----Loading height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape at sides and rear * Chassis, turntable, access ramps and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks and turntable painted in black tone ----Info: * New vehicle with manufacturer warranty * Errors and prior sale reserved * Sample images may show special equipment ----Lead time: * Vehicle available from approx. week 23/2026

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for maneuvering purposes switched to the first axle via EBS (no installation required on the truck side) * Rear axle as self-steering axle with electro-pneumatic steering lock * Locking of the self-steering axle from the driver's cab for maneuvering purposes, controlled via EBS (no installation required on the truck side) ----Suspension: * Air suspension with lifting/lowering device and Ride-to-Return valve ----Electrics / Lighting: * Smart Board mounted on the trailer as an information tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12/24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at rear for extended length lighting * Side marker lights with indicator signal control * Tyre pressure monitoring system with display option in the truck via EBS signal (no installation required on the truck side) Cjljq Euakshcdw Dogp ----General equipment: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swing arm as carrier for connecting cables from truck to semi-trailer ----Low loader deck: * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and front tool box made of galvanized powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high aluminium side boards (in RAL colour of choice) on the sides of the fifth wheel platform, foldable and removable * Rear wall -150 mm- high plug-in * Rear slope on fifth wheel platform to low bed approx. 700 mm long with tread plate covering and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and low bed platform with 60 mm clamped wooden planks * Tear plate above the axles * 9 x mechanical folding extensions to 3 m overall width, but not in the rear slope (extension planks available with closed storage compartment across the direction of travel under the loading floor) * 3 mounting shafts under the fifth wheel platform for storage of optional aluminium loading ramps or wooden planks for wheel well coverings ----Load securing (LaSi package): Fifth wheel platform: * Perforated outer frame angled at 45° with hole pattern for lashing points (2 t lashing capacity per point at a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings each side recessed in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the drop, 1 x above the centre axle next to the longitudinal beam) Low loader platform: * 3 x 13.4 t lashing rings each side on the outer frame (1 x beginning of the drop on the fifth wheel platform, 1 x beginning of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings each side (1 x between front wheel well and 1st axle, 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings each side bolted to the outer frame of the wheel wells (2 on the front wheel well, 1 on the rear wheel well) ----Excavator arm recess: * Extended excavator arm recess from end of last fixed axle through to steering axle up to rear crossmember, continuous with

Stanje: novo, največja dovoljena obremenitev: 38.900 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, T5 Profile 50.0: ----Braking System: * WABCO EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm when axle is lifted) * Last axle with trailing steering (locking of trailing axle for maneuvering possible from the cab without truck-side installation, as well as additionally via a switch on the trailer); lock must be deactivated before driving on public roads * Forced lift and lowering of the lift axle for maneuvering purposes (truck-side installation required) with speed-dependent control via EBS electronics ----Suspension: * Air suspension, raising and lowering system with RtR-valve ----Drawbar: * Drawbar 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as information tool with pressure sensors for axle load display per axle group * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation necessary) * LED light system 12 / 24 V * Removable LED beacon at the rear ----General Attachments: * Mechanical warning sign package for 3 m overall width * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, mounted left side * Front-axle plastic fenders and galvanized steel mudguards at rear axle ----Low Loader Deck: * Extension head of the turntable platform with 45° corners and 3 storage compartments with lockable folding lids (folding lids open to the rear) * Shortening of the low loader platform by 500 mm to 6,280 mm incl. extended offset cranking by 500 mm forward * Rubber covering on folding frame, drive-on ramp, and platform running surface * Bamboo timber between the longitudinal beams in front of the digger arm support ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings at the front corners * On each side, front and rear corners: 2 x 13.4 t UVV lashing points * Additionally, 5 x 10 t UVV lashing rings per side (pivoting and lowerable, loadable in all directions) * 4 stake pockets per side, each with simultaneous 2 t lashing capability * 1 x 16 t UVV lashing ring on the rear traverse ----Widening: * Extendable and folding width extensions for 3 m overall width (beam holders under the chassis, right side) Cgolhjxptn Djcdw Dsp ----Digger Arm Support: * Continuous digger arm trough with reinforcement profile from last axle to rear crossmember approx. L=2,350 x W=770 x D=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides ----Ramps: * Hydraulic folding ramp with dual-circuit hydraulics and fold-out tip section, approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for truck-side hydraulic pump output over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded 890 mm +/- 20 mm via air suspension ----Platform Dimensions: * Platform above slewing ring: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm, incl. 860 mm drive-on slope ----Paintwork: * Chassis, turntable, drawbar, widening consoles, access ramps hot-dip galvanized * Drawbar yoke, axles, hydraulic axle supports, and air tanks painted in a black tone ----Information: * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Available from KW

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lift and lower system and RtR-valve * Smart Board installed on trailer as information tool (axle load display - separate for front and rear) * Tire pressure monitoring with display option in the truck via EBS signal without truck-side installation * Side underrun protection * Swivel supports at rear of chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight galvanized steel skirts with spray protection * Contour tape on sides and rear, reflective * 15-pin power plug * LED lighting 12 / 24 V * LED beacon (removable) at rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, black powder coated, side right * Compartment in rotary frame for accessories with folding lid, 2 pcs. container locks permanently installed (directly after turntable platform) * ROBOT welded anti-slip coating on the steel plate of the rotary frame platform (protruding weld seams) * Load securing package consisting of: 2 lashing rings (13.4 t) at front left & right on front wall bearer, front & rear 1 pair of UVV lashing rings (13.4 t), and on each side 3 pairs of UVV lashing rings (10 t) pivotable and lowerable, loadable in all directions and embedded in the outer frame, each side with 3 stake pockets with simultaneous 2 t lashing option Cgolhjtplwijcdw Dsp * 6 pairs mechanical folding outriggers for 3 m total width (not in the rear taper) * Extension boards stored in the middle of the loading area * Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm * Mechanically laterally adjustable * 4-way control block for later retrofitting of hydraulic ramp shift * Excavator arm storage over rear axle, continuous to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing rings LC 6400 daN in excavator arm storage at side in longitudinal frame * 2 steps galvanized at rotary frame left + right * Profifix lashing strip centered in longitudinal axis, in flat area for lashing up to LC 3000 daN * Chassis, turntable, folding outriggers, drop supports, and drive-on ramps hot-dip galvanized * Axles, slewing ring, air tank, tow bar painted in black tone * Loading edge loaded approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer warranty * Errors and intermediate sale excepted * Available approx. from week 22/2026 * Sample images