Meiller 3-Achs Stahlm. Mit E-Verdeck U. Hydr. Heckklappe nakup rabljenega (66.323)

Stanje: novo, največja dovoljena obremenitev: 28.640 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.600 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 25 m³, Leto izdelave: 2026, Oprema: ABS, Zavora: * Wabco EBS-E / ABS (elektronski zavorni sistem z RSS) * Siliščno odklepanje za vzmetne cilindre * Kolutne zavore 22,5" * Zavorni sistem za finišer s skrajšanimi zadnjimi blatniki in ročnim stikalom za finišer ----Os: * 3 x 9 t BPW ali SAF osi (odvisno od razpoložljivosti) * Dvižna os z zagonsko pomočjo ----Vzmetenje: * Zračno vzmetenje z avtomatskim spuščanjem med postopkom kipanja (za povečanje stabilnosti, možno izklopiti za stroje za polaganje asfalta) ----Elektrika / razsvetljava: * Sistem za nadzor tlaka v pnevmatikah (TPMS) * 1 x 15-polna vtičnica za prikolice * 5-komorni zadnji žarometi s zaščitno streho * 1 x dodatni LED delovni žaromet * utripajoče stranske označevalne luči ----Splošni dodatki: * Aluminijasti zračni rezervoar * Jost teleskopske jeklene podporne noge s ploščato nogo (mogoče odklopiti le v praznem stanju) * 4 m aluminijaste lestve, nameščene desno ob strani nad blatniki * zaprti plastični posamezni blatniki Tedpfoxxf Twox Acnob * preklopna zaščita proti podletu * vlečna kljuka zadaj * pregibna lestev za vzpon spredaj levo ob strani * škatla za dokumente na prednji steni ----Okvir: * Šasija iz visoko trdnega finezrnatega jekla s prečkami, tipičnimi za Meiller ----Kiparska nadgradnja: * Polkrožna jeklena zadnja kiper korita * Prednja stena s 600 mm streho kot nosilec ponjave * Stranske stene z robustnim neprekinjenim zgornjim robom, nagnjenim navznoter * Prednja in zadnja stena poševni ----Debelina dna, stranskih sten, prednje in zadnje stene: * Prednja stena 4 mm iz jekla BS 70 * Zadnja loputa 4 mm iz jekla HBW 400 * Stranske stene iz 4 mm jekla HBW 450 * Prilagojeno dno iz 5/6 mm Hardox jekla 450 ----Hidravlični cilinder: * Sprednji hidravlični cilinder z zmernim delovnim tlakom ----Hidravlična zadnja stena: * Ležeča hidravlična in nihajoča zadnja stena. Upravljanje hidravlične zadnje stene prek mehanskega krogelnega ventilskega bloka ----Ponjave: * električna drsna ponjava - RAL 9006 bela aluminij - s stikalom na šasiji in daljinskim upravljalnikom ----Nakladalna prostornina: * cca. 25 m³ ----Višina sedla: * prazno cca. 1.247 mm * naloženo cca. 1.217 mm ----Barva: * Barvanje šasije v RAL 7021 črno sivi * Kiper nadgradnja v RAL 9006 belo aluminij ----Splošne informacije: * --Tehnično dovoljena skupna masa je 39.000 kg-- * Možnost napake in predhodne prodaje * Novo vozilo s tovarniško garancijo ----Dobavni rok: * dobavljivo od 37. tedna / 2026

Stanje: novo, največja dovoljena obremenitev: 26.840 kg, skupna masa: 33.000 kg, konfiguracija osi: 2 osi, prostornina tovornega prostora: 25 m³, Leto izdelave: 2025, Brake system: * Wabco EBS-E / ABS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes 420 x 180 mm * Paver brake with shortened rear mudguards and manual paver switch ----Axles: * 2 x 9 t BPW axles * Lifting axle with start-up aid * Reinforced single-leaf torsion bar suspension ----Suspension: * Air suspension with automatic lowering function during tipping operations (to increase stability, can be switched off for pavers) ----Electrics / Lighting: * SmartBoard (raise and lower, lowering the lifting axle, start-up aid, odometer, axle load display, ECAS, readout of error memory) * 1 x 15-pin trailer socket * Eco-LED II lighting with protective roof * 1 additional LED work light * Flashing side marker lights * Tire pressure monitoring system (TPMS) ----General Attachments: * Aluminum air tanks Todpfx Ajw Eg Eqocnsb * Telescopic steel landing legs with base plate (can only be uncoupled when unladen) * 4 m aluminum access ladder stowed on the right side above the mudguards * Closed individual plastic mudguards * Folding underrun protection * Rear towing eye * Folding access ladder on the front left side * Document box on the front wall ----Chassis: * High chassis frame made of high-strength fine-grain steel ----Tipping Body: * Half-shell steel rear tipper body made of STEELECT 450 steel - HBW 450 * Front wall with 600 mm front roof as tarp support * Side walls with stable, all-around, inward-sloping top rail * Front and rear walls angled ----Thickness of floor, side walls, front and rear walls: * Floor tailored 5 / 6 mm * Front wall 5 mm * Rear wall 5 mm * Side walls 5 mm ----Hydraulic Ram: * Front hydraulic ram with medium working pressure ----Hydraulic Tailgate: * Overlapping hydraulic and swinging tailgate * Control of the hydraulic tailgate via mechanical ball valve ----Tarp: * Electric sliding tarp - RAL 9006 white aluminium - with manual switch on the chassis and radio remote control ----Coupling height: * Unladen approx. 1,350 mm * Laden approx. 1,340 mm ----Loading volume: * Approx. 25 m³ ----Paintwork: * Chassis painted in RAL 7021 black grey * Tipper body in RAL 9006 white aluminium ----General Info: * Subject to errors and prior sale * New vehicle with manufacturer’s warranty ----Delivery time: * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 27.760 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 25 m³, Leto izdelave: 2026, Brakes: * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes 420 x 180 mm * Paver brake with shortened rear mudguards and manual paver switch ----Axle: * 3 x 9 t BPW axles * 1st axle liftable with traction aid ----Suspension: * Air suspension with automatic lowering during the tipping process (for increased stability; can be deactivated for overhead pavers) ----Electrics / Lighting: * Smart-Board (lift and lowering system, lifting axle lowering, traction aid, odometer, axle load indicator, ECAS, error memory reading) * Tire pressure monitoring system (TPMS) * 1 x 15-pin trailer socket * Eco-LED II lighting with protective cover * 1 x additional LED work lamp * Flashing side marker lights ----General attachments: * Aluminium air tanks * Telescopic steel landing legs with plate foot (can only be unhitched when empty) * Enclosed plastic single mudguards * 4 m aluminium access ladder, stored on the right side over the mudguards * Folding underrun protection * Rear tow eye ----Chassis: * High chassis frame made of high-tensile fine grain steel, heavy-duty version ----Tipping body: * Semi-round steel rear tipper body, complete, made of STEELECT 450 steel -HBW 450- * Side walls with robust, continuous, inward-angled top belt * Outside access and aluminium platform in front of front wall ----Thickness of floor, side walls, front and rear wall: * Front and rear wall inclined * Front and rear wall 5 mm * Side walls 6 mm * Floor 8 mm, HBW 450 steel ----Hydraulic ram: * Front hydraulic ram with medium working pressure ----Hydraulic tailgate: * Overlapping hydraulic and swinging tailgate * Control of hydraulic tailgate via mechanical ball valve ----Tarpaulin: * Manual roll-up tarpaulin - RAL 9006 white aluminium ----Loading volume: * Approx. 25 m³ ----Fifth wheel height: * Unladen approx. 1,340 mm * Laden approx. 1,330 mm ----Paintwork: * Chassis painted RAL 7021 black grey * Tipping body RAL 9006 white aluminium ----General information: Todpow Eg Edefx Acnsb * --Technical gross weight of up to 39,000 kg possible-- * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery time: * Available from week 11/2026

Stanje: novo, barva: bela, voznikova kabina: drugo, vrsta prenosa: drugo, prostornina tovornega prostora: 18 m³, dolžina tovornega prostora: 5.700 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.400 mm, Leto izdelave: 2011, Vehicle location: Bovenden. Todjvhknispfx Acnsb Body: For MAN and Mercedes-Benz 4-axle chassis from approx. 4,200 mm wheelbase, approx. 18.3 m³. ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale, and errors excepted!

Stanje: rabljeno, največja dovoljena obremenitev: 27.050 kg, skupna masa: 33.500 kg, konfiguracija osi: 3 osi, prva registracija: 07/2004, skupna širina: 2.550 mm, Oprema: ABS, * Schwarzmüller SPA 3/E, 3-osni ploski prikolici MEGA * Dvignjena os * Tehnični pregled veljaven do 07-2027 * Vse informacije so podane brez jamstva za njihovo pravilnost * Pridržujemo si pravico do sprememb in napak * CENA NETO Todpfx Acjzm El Nsneb

Stanje: novo, največja dovoljena obremenitev: 28.380 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.600 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 25 m³, Leto izdelave: 2026, Oprema: ABS, Brake System: * Wabco EBS-E / ABS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * 22.5" disc brakes * Paver brake with shortened rear mudguards and manual paver switch ----Axle: * 3 x 9 t BPW Eco axles * 1st axle liftable with starting aid * Meiller-specific torsion cross member ----Suspension: * Air suspension with raise/lower system and automatic lowering during tipping operation (can be deactivated for improved stability with road pavers) ----Electrics / Lighting: * Smart Board: Raise/lower and lower the lift axle, axle load indicator, mileage counter, mileage counter, error memory readout * Tire Pressure Monitoring System (TPMS) * 1 x 15-pin trailer socket * LED rear lights with protective cover ----General Equipment: * Aluminium air tanks * BPW telescopic landing legs with base plate * 4 m aluminium side ladder mounted on the right side of the frame * Closed plastic single mudguards * Folding underrun guard Tjdpfx Ajr Exzuscnjb * Foldable A-shield * Rear towing eye * Bolted access ladder with foldable lower section, front left * Document holder on the front wall ----Frame: * Chassis made of high-strength fine-grained steel ----Tipping Body: * Half-shell steel rear tipper body made of Hardox HBW-450 steel * Side walls with robust continuous upper belt inclined inwards * Front & rear wall slanted * Overlapping tailgate with double hinge and automatic 2-hook locking ----Thickness of floor, side walls, front and rear wall: * Tailored floor 5 / 6 mm * 4 mm side walls made of HBW 450 steel * 4 mm rear wall made of HBW 450 steel * Front wall outside 3 mm BS50 steel and inside 3 mm BS70 steel ----Hydraulic Cylinder: * Front mid-pressure hydraulic cylinder ----Tarp: * Electric sliding tarp -RAL 9006 white aluminium- with remote control or mechanical switch operation on the right side * 600 mm tarp carrier at the front wall ----Fifth Wheel Height: * Unladen 1,247 mm * Laden 1,217 mm ----Load Volume: * Approx. 25 m³ ----Paintwork: * Chassis painted in RAL 7350 nova grey ----General Info: * Thermal insulation according to DIN 70001 and prepared for measuring technology - brackets without sensors * New vehicle with manufacturer's warranty * --Perm. gross weight technically possible: 39,000 kg-- * Subject to error and prior sale ----Delivery Time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 28.660 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.600 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 25 m³, Leto izdelave: 2026, Oprema: ABS, Brake system: * Wabco EBS-E / ABS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * 22.5" disc brakes * Paver brake with shortened rear mudguards and manual paver switch Axles: Todper Exzmjfx Acnob * 3 x 9 t BPW axles * 1st lift axle with start-up aid Suspension: * Air suspension with automatic lowering during tipping process (for increased stability, deactivation possible for pavers) Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 1 x 15-pin trailer socket * 5-chamber tail lights with protective cover * 1 x additional LED work light * Flashing side marker lights General Attachments: * Aluminium air tank * Jost telescopic steel landing legs with plate foot (uncoupling only when empty) * 4 m aluminium access ladder, stored on the right side above the mudguards * Enclosed plastic single mudguards * Folding underrun guard * Rear towing eye * Folding access ladder on the front left side * Document box on the front wall Frame: * Chassis made of high-strength fine-grain steel with Meiller-specific torsion cross members Tipping Body: * Half-shell steel rear tipper body (front hydraulic ram with medium working pressure) * Front wall with 600 mm front roof as tarpaulin carrier * Side walls with robust, continuous, inward-sloping top rail * Slanted front and rear wall * Overlapping tailgate with rubber seal and two additional toggle fasteners as well as automatic 2-hook locking system Thickness of bottom, side walls, front and rear wall: * Front wall 4 mm BS 70 steel * Tailgate 4 mm HBW 400 steel * Side walls 4 mm HBW 450 steel * Tailored floor of 5/6 mm Hardox 450 steel Tarpaulin: * Electric sliding tarpaulin – RAL 9006 white aluminium – with switch on chassis and remote control Load volume: * Approx. 25 m³ Saddle height: * Unladen: approx. 1,247 mm * Laden: approx. 1,217 mm Painting: * Chassis painted RAL 7021 black grey * Tipping body in RAL 9006 white aluminium General Information: * Permissible gross weight technically possible up to 39,000 kg * Errors and prior sale reserved * New vehicle with manufacturer's warranty Delivery time: * Immediately available ex works Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 28.600 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 25 m³, Leto izdelave: 2026, Zavora: * Wabco EBS-E / ABS (elektronski zavorni sistem z RSS) * Nujno sproščanje za valj z vzmetno silo * Kolutne zavore 22,5" * Položajna zavora s skrajšanimi zadnjimi blatniki in ročnim stikalom za zaključek ----Premi: * 3 x 9 t BPW ali SAF – premi (odvisno od razpoložljivosti) * Dvižna os z zagonsko pomočjo ----Vzmetenje: * Zračno vzmetenje z avtomatskim spuščanjem med dvigovanjem kesona (za povečanje stabilnosti, možno izključiti pri prekrivanju stropov) ----Elektrika / razsvetljava: * Sistem za nadzor tlaka v pnevmatikah (TPMS) Todpfxoxxf Tqj Acnsb * 1 x 15-polna priključna vtičnica za priklop * Eco-LED II osvetlitev s streho za zaščito * 1 x dodatna LED delovna luč * Utripajoče bočne označevalne luči ----Splošna dodatna oprema: * Aluminijasti zračni rezervoar * Teleskopske jeklene nosilne noge s ploščatimi podstavki (možno spustiti le pri praznem vozilu) * 4 m aluminijasta lestev, pritrjena desno ob blatniku * Zaprti plastični posamezni blatniki * Preklopna bočna zaščita pod vozilom * Vlečna kljuka zadaj * Zložljiva vstopna lestev spredaj levo * Škatla za dokumente na čelni steni ----Okvir: * Visok podvozni okvir iz visoko trdnega finezrnatega jekla z Meiller torzijskimi prečniki ----Kiparska nadgradnja: * Polkrožna zadnja kiper korita iz jekla STEELECT 450 -HBW 450- * Čelna stena s 600 mm streho kot nosilec ponjave * Bočne stene z močno -v celoti potekajočo- navznoter nagnjeno zgornjo ojačitvijo ----Debelina dna, stranic, čelne in zadnje stene: * Čelna, bočni in zadnja stena 4 mm * Čelna in zadnja stena nagnjeni * Tailored dno 5/6 mm ----Hidravlični cilinder: * Prednji hidravlični cilinder s srednjim delovnim tlakom ----Hidravlična zadnja stena: * Prilegajoča in nihajoča hidravlična zadnja stena. Upravljanje zadnje stene preko mehanske krogelne pipe ----Ponjava: * Električna drsna ponjava -RAL 9006 bela aluminijasta- z ročnim stikalom na podvozju in daljinskim upravljalnikom ----Nakladalna prostornina: * pribl. 25 m³ ----Višina priklopa: * naložen pribl. 1.350 mm * obremenjen pribl. 1.340 mm ----Barva: * Barvanje podvozja v RAL 7021 črno-siva * Kiper nadgradnja v RAL 9006 bela aluminijasta ----Splošne informacije: * --Tehnično dovoljeno skupno težo 39.000 kg-- * Napake in vmesna prodaja pridržane * Novo vozilo z garancijo proizvajalca ----Rok dobave: * dobava od 37. tedna 2026

Stanje: novo, največja dovoljena obremenitev: 18.800 kg, skupna masa: 22.000 kg, Leto izdelave: 2026, RSM Roll-off Container 38m³ with Hydraulic Rear Door and Grain Slide * Model: ECO-2 * Year of Manufacture: 2025 * Volume: 38m³ * Tare Weight: 3,200 kg * Payload: 18,800 kg * Gross Vehicle Weight Rating: 22,000 kg * Hydraulic Rear Door * Grain Slide * Perimeter Net Hooks The RSM universal container, a versatile solution for all requirements, complies with DIN 30722 Part 2 standards and is an ECO Type 2 model with a permissible total weight of 22,000 kg. Todowgcrpopfx Acnob For further information, please feel free to contact us.

Stanje: novo, lastna masa: 8.490 kg, največja dovoljena obremenitev: 40.510 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.490 kg, Oprema: ABS, Chassis: - Robust welded steel frame structure with front frame drop and flat loading platform with rear bevel, approx. 500x100 mm - Gooseneck height 200 mm with beveled corners - Gooseneck end with bevel approx. 500 x 100 mm (traction ribs on outer frame in the area behind rear bevel) - 2 kingpin positions with interchangeable 2" kingpin - Outer frame closed outwards as slotted rail for lashing with tie-down straps - Reinforced frame design / point load at center of gravity - Provisions for extendable deck wideners - With excavator trough (without cover), approx. 220 mm deep, 600 mm wide, starting after the 2nd axle to end of vehicle - 1 pair wheel recesses in front of the axle with steel covers (covers with Körapur coating), approx. 400 mm deep, plus 1 pair wheel recesses between the 1st and 2nd axle with steel covers - Underride protection = extended end plate - Hydraulic drop-down supports at rear Floor: - 35 mm larch timber floor with aluminum omega profiles Axles, Steering, and Tyres: - BPW air suspension axles, each rated at 10 t axle load, bellows diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lifting and lowering device, total lift approx. 200 mm - 2nd driving height via ball valve +50mm - 1st axle lift axle (wired through EBS), fully automatic actuation with manual emergency actuation via button on trailer - 3rd axle as friction-steered trailing axle with electric and mechanical locking - 12 steel disc wheels, 10-hole, hub-centered - 12 tyres 245/70 R 17.5 143/141J, tubeless - Incl. tyre pressure monitoring system Braking System: - Dual-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Pneumatic connection yellow/red Paintwork: - Steel shot blasting, spray galvanising of chassis and primer - Painting of chassis/wheel hubs/outer frame in DB 7350 Novagrau Accessories: - Removable side and rear boards on the gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum underrun protection - 4 wheel chocks - Steel fenders with Clear-Pass - Long license plate holder in end plate Tjdpfx Aewu A Sljcnsb - 1 removable ECE plate at the rear - 11 pairs ZK modules 10t lateral: - 2x on the gooseneck - 9x on the loading platform - Without rear towing eyes - Extendable warning signs including 3 position lamps each, front at landing legs and rear in front of end plate, steplessly extendable up to 4,500 mm load width - 4 insertable sockets for warning signs in stake pockets on loading platform - 6 pairs stake pockets along sides for 100x50 mm stakes - 2 cross rows of stake pockets for 100x50 mm stakes on the gooseneck from outside frame to main frame (1 before and 1 after kingpin positions) - 3 cross rows of stake pockets for 100x50 mm stakes on loading platform from outer frame to main frame (1 in front section, 1 before 1st axle, 1 after 3rd axle) - 2 pairs steel plates on loading platform for container locks to accept 1x 20ft container - Rubber skirt mounted on underrun protection - Preparation (cable routing for NATO cable and hole pattern for subsequent mounting of NATO socket at front of end plate and bracket on vehicle) for optional retrofit of electrohydraulic power unit at right rear for potential operation of access ramps - Mechanical 24-ton stabiliser landing gear with single-sided operation and compensating shaft Optional: Trailer available with aluminum folding ramps.

Stanje: novo, lastna masa: 8.900 kg, največja dovoljena obremenitev: 40.100 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.900 kg, Chassis: - Robust welded steel frame construction with front frame lowering and level loading platform, rear chamfer approx. 500x100 mm - Neck height 200 mm with chamfered front corners - Chamfered end swan neck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear chamfer) - 2 kingpin positions with replaceable 2” kingpin - Outer frame closed to the outside as perforated outer frame - Loading platform with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm - Frame before and after extension with 80x80 mm step - Reinforced frame design / point load focused in the retracted state - Without extendable loading platform widenings, however, prepared for retrofitting (=guiding tubes welded into the frame) - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle, extending to the end of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers coated with Körapur), depth approx. 400 mm - Underrun protection = extended end plate - Drop support legs at the rear Axles, Steering and Tyres: - BPW air suspension axles, each with 10 t axle load, air bellows diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering device with total lift approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired to EBS), confirmation fully automatic with manual emergency activation via button on semi-trailer Tedpfjxnnk Dex Acneb - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, centered by offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Including tyre pressure monitoring Accessories: - Plug-in side and rear boards on swan neck, approx. 400 mm high - Spare wheel holder - Side aluminium underrun protection - 4 wheel chocks with holder - Elongated number plate holder in end plate - 1 removable ECE sign at the rear - 11 pairs ZK modules 10t, on the side: - 2x on the swan neck - 2x on the loading platform in front of the extension - 7x after the extension - Extendable warning signs including 3 position lamps each, front at landing gear and rear before end plate, steplessly extendable up to loading width 4,500 mm - 4 plug-in holders for warning signs in stake pockets on loading platform - 6 pairs of stake pockets on the side for plug-in stakes 100x50 mm - 2 transverse rows of stake pockets for plug-in stakes 100x50 mm on the swan neck from the outer frame to the main frame (1x in front of and 1x after the kingpin positions) - 3 transverse rows of stake pockets for plug-in stakes 100x50 mm on the loading platform from outer frame to main frame (1x in front of the extension, 1x after the extension and 1x after the 3rd axle) - 2 pairs of steel plates in the loading platform for container locks to accommodate 1x 20ft container - Rubber apron mounted on underrun protection Optional: The trailer is available with ramps.

Stanje: novo, lastna masa: 10.100 kg, največja dovoljena obremenitev: 38.900 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, obratovalna teža: 10.100 kg, Oprema: ABS, Chassis: - Sturdy welded steel frame construction with front frame cranking and flat loading platform, rear ramped section approx. 500x100 mm - Gooseneck 200 mm with beveled corners - Sloped gooseneck end approx. 500x100 mm (traction ribs on outer frame behind rear inclination) - 2 kingpin positions with replaceable 2" kingpin - Outer frame closed on the outside as perforated frame for lashing with tension belts (chains not permitted) - Reinforced frame design / point load at the center of gravity - Prepared for extendable load platform widenings - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to end of vehicle - 1 pair wheel recesses in front of axle with steel covers (covers with Körapur coating), depth approx. 400 mm, and 1 pair between 1st and 2nd axle, steel covers - Underrun protection = extended end plate - Drop-down supports at rear Ramps: - 2-piece drive-up ramps, custom design, with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting mechanism (only in connection with electrohydraulic unit) - Width approx. 800 mm - Wood topping - Incl. traction ribs on ramps - Can be secured for travel with tension belts - Operated by manual lever mounted rear right in direction of travel - Hydraulically laterally shiftable Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gears: - Mechanical 24 t landing gears, operated from one side with load equalization Axles, Steering, and Tires: - BPW air suspension axles, each rated at 10 t axle load, airbag diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lower device, total stroke approx. 200 mm - 2nd drive position via ball valve +50 mm - 1st axle as lift axle (wired via EBS), operation fully automatic with mechanical emergency actuation via button on trailer - 3rd axle as friction steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center-fitted offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Tedpfx Acjwviwksneb Accessories: - Plug-in side walls and rear wall on gooseneck approx. 400 mm high - Spare wheel holder - Lateral aluminum underrun protection - 4 wheel chocks - Long license plate holder in end plate - 1 detachable ECE sign at rear - 11 pairs ZK modules 10t on the sides: - 2x on the gooseneck - 9x on the load platform - Steel mudguards with clear pass - Extendable warning panels incl. 3 position lamps each, front at landing gears and rear before end plate, infinitely extendable up to loading width 4,500 mm - 4 plug-in holders for warning panels in stake pockets on loading surface - 6 pairs of lateral stake pockets for 100x50 mm stakes - 2 rows of crosswise stake pockets for 100x50 mm stakes on the gooseneck from outer frame towards main frame (1x before and 1x after kingpin positions) - 3 rows of crosswise stake pockets for 100x50 mm stakes on loading platform from outer frame towards main frame (1x in front area, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in load platform for container locks to receive 1x 20ft container - Rubber apron mounted on underrun protection - Steel shot blasting, chassis hot-dip galvanized and primed - Chassis/wheel hubs/outer frame painted in DB 7350 Nova grey

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902026742, lastna masa: 6.300 kg, največja dovoljena obremenitev: 28.700 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2020, naslednji pregled (TÜV): 08/2027, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R19,5", barva: črn, Pozor: Slike so arhivske. Vozilo je morda v uporabi! #Podvozje Prikolica za prevoz blaga Ploščad prikolice z zamenljivim 2-palčnim kraljem Pritrdilna plošča za jeklenke, dolžina ca. 7.040 mm 6 nosilcev za jeklenke (notranje dimenzije: 82 x 52 mm) Pokrov za jeklenke s sitotiskanimi ploščami in jeklenimi nosilci Zunanji okvir rahlo nagnjen z „Load-Lock profilom“ za pritrditev zategovalnih trakov 24-tonska dvotočna dvižna naprava, upravljanje z ene strani, z okroglim spodnjim delom in ravno priključno ploščo, z nastavljivo dvigom Opomba: Svobodni kot opore ali svobodni radij gibanja navzdol nazaj ca. 1930 mm Izvlečna lestev na zadnji strani, stranski varovalnik vrat 2 podstavka s pritrdilnim sistemom Stranski zaščitni rob, aluminijast Zaščitni spodnji rob, pocinkano jeklo 6 četrtokroglih blatnikov pred prvo osjo in za vsako osjo, z zaščitnimi zložljivimi plati za preprečevanje brizganja za vsako osjo Zaščitni odbijač na zadnji strani Stranski odbijač za palete, robustna izvedba, dvostransko pritrjen, ca. 15 - 20 mm visok, z možnostjo pritrditve na vsakih 200 mm, višina nakladanja se zmanjša za ca. 15- 20 mm Nosilec rezervnega kolesa za 1 kolo z nastavkom za pritrditev kolesa Rezervno kolo, proizvajalec je enak osnovni pnevmatiki Jekleno platišče Plastična orodjarna škatla, z predalom in vložkom, š=650 / v=520 / g=670 mm, zapiranje z obeskom Tedpfx Aeztqd Dscnob #Osi + vzmetenje SAF osi z disčnimi zavorami, „Osno podvozje merjeno z laserjem“, zmanjšanje obrabe pnevmatik in porabe goriva Zračno vzmetenje, prva os je avtomatska dvižna os, vključno s prisilnim spuščanjem in pomočjo pri speljevanju, upravljanje „3-krat pritisnite zavoro“ (pomoč pri speljevanju je funkcionalna do preseženja obremenitve osi za 30 % in do hitrosti največ 25 km/h) #Zavorni sistem Dvovodna zračna zavorni sistem, barvno označene cevi za lažje vzdrževanje Zavore s pomnilnikom (Federspeicher-Feststellbremse) 2 vtičnice za priključitev, ki se ne morejo zamenjati, spredaj EBS, elektronski zavorni sistem z vtičnico EBS spredaj Sistem stabilnosti vozila, zaznavanje obremenitve osi preko signala EBS-Canbus #Kolesa in pnevmatike 6 x 435/50 R19,5" 6 x jeklena platišča, tovarniško srebrna barva #Elektrika 24 Volt, večkomorna luči z LED 2 beli/rdeči luči za označevanje obrisa spredaj, LED 2 x 7-polna in 1 x 15-polna vtičnica, ki se ne morejo zamenjati, spredaj #Dno Sitotiskane plošče, debelina ca. 30 mm, za visoko točkovno obremenitev, do največ 5.600 kg obremenitve osi #Prednja stena / okvirovi spredaj 2.580 mm visoka Okvirovi, jekleni, v volumenski izvedbi #Zadnja stena / okvirovi zadaj Okvirovi zadaj, jekleni, do spodnjega roba strehe, pritrdilni sistem za ponjavo z okroglimi cevemi in zatezovalnikom ponjave Mehansko podaljšanje zadnjih okvirov za ca. 400 mm na vsaki strani za nakladanje in razkladanje. Zadnja vrata, streha, stranske ponjave in srednji okvirovi morajo biti odprti. Zadnja vrata, 2-krila z 2 notranjimi vrtljivimi zapahami Fliegl „I-Lock“ integrirani zapah vrat #Streha Fliegl "Blitz" - pomična streha Dvižna streha zadaj, z možnostjo premikanja strehe od zadaj proti spredaj L-strešni nosilec za avtomobilsko industrijo Streha ni elastična, ne upogiba se EcoLift - dvižna streha za ca. 380 mm, dvostransko, z oporo s plinskim blažilnikom 3 vozne nastavitve spredaj: notranja višina spredaj ca. 2900 mm / 2950 mm / 3000 mm Optimalni odvodnik za dež na zadnji strani #Država registracije / oznake Potrdilo o preskusu po standardu EG 2007/46 Potrdilo o varnosti tovor po standardu EN 12642 XL

Stanje: rabljeno, prevoženi kilometri: 1.001 km, barva: oranžna, voznikova kabina: drugo, vrsta prenosa: drugo, prostornina tovornega prostora: 13 m³, dolžina tovornega prostora: 4.600 mm, širina tovornega prostora: 2.340 mm, višina nakladalnega prostora: 1.200 mm, Lokacija vozila: Bovenden, jeklena nadgradnja Nadgradnja: za 3-osno tovorno vozilo, približno 13 m³, hidravlična zadnja vrata. Zaščita strehe. Tjdpjvhgy Uofx Acnsb PODATKI O DODATNI OPREMI SO NAVEDENI BREZ GARANCIJE, pridržujemo si pravico do sprememb, medprodaje in morebitnih napak!

Stanje: rabljeno, prevoženi kilometri: 1.001 km, vrsta goriva: dizel, barva: srebrn, voznikova kabina: drugo, vrsta prenosa: drugo, dolžina tovornega prostora: 5.100 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 900 mm, Vehicle location: Bovenden, steel body Body: 3-way tipper, aluminium side panels on the right divided, foldable and pendulum-action, exchange system ex 2646; surcharge for fifth-wheel coupling frame EURO 1,500.00. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to alterations, prior sale, and errors! Tjdpfx Acoi Rrtwsneb

Stanje: rabljeno, največja dovoljena obremenitev: 26.760 kg, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2012, naslednji pregled (TÜV): 08/2012, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 2.800 mm, Leto izdelave: 2012, Oprema: ABS, Prva roka Avstrija, vrhunsko stanje. Protiutež za vlečni viličar spredaj pri čelni steni (glej fotografijo). Fiksna aluminijasta streha, nalagalne palice, tovorni sistem, dvigalna os z zračno vzmetenjem. Tedpfxjyd Tawe Acnsb

Stanje: novo, največja dovoljena obremenitev: 37.350 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Selection of equipment features. Full equipment specification available on request. Chassis: * Welded construction using high-quality steel profiles with through cross-members, designed for high floor and point loads, equipped with heavy-duty outer frame * Rear loading deck as a steel welded construction with two welded-on external driving tracks made of 5-hole steel plate (Lohr/Rolfo pattern) over a length of approx. 2,250 mm, hydraulically lowerable by approx. 350 mm * Integrated at the rear of the vehicle is a hydraulically extendable loading platform (approx. 1,500 mm) as a steel welded construction with 5-hole steel plate (Lohr/Rolfo pattern) cover, lighting mount, and two ramp compartments with ramp supports * Rear operation and control via an electric-hydraulic unit mounted in a stainless steel box on the left side of the chassis, operated by remote control * Power supply via the towing vehicle’s battery * NATO socket on the front wall (no connecting cable to tractor unit) Coupling device: * 2-inch kingpin, replaceable from below Underrun protection: * Fixed installation compliant with EC regulations Landing legs: * 2 x 12 t support winches with 2-speed gearbox Axles: * 3 x 10 t air suspension axle units, SAF brand with disc brakes approx. 370 x 45 mm, ABS, 10-stud hub-centered ET120 wheel connection, total air suspension travel approx. 200 mm (lifting approx. 140 mm, lowering approx. 60 mm), air suspension controlled via hand valve with stop function Steering axle: * 3rd axle as trailing steering axle with manual and automatic reverse lock Lifting axle: * 1st axle automatically liftable, additionally switchable via control on chassis frame or via pin 12 of lighting socket Tyres: * 6 units, 445/45R19.5 brand of our choice, mounted on 14.00x19.5 rims, 10-stud ET120 Mudguards: * EC-compliant, 1/4 PVC mudguards before and after the wheels on the 1st axle (front and rear), 2nd and 3rd axles (rear) Spare wheel holder: * None Todpfx Aoy Up S Sjcneb Brake system: * Two-line brake system according to EC with EBS, automatic load-dependent braking * Spring-loaded brake as parking brake acting on 2 axles, anti-swapping couplings fixed on front cross beam, no connecting line to tractor unit, Wabco brand Lighting system: * EC-compliant, 24-volt, multi-chamber rear lights, license plate lights, LED side marker lights, LED front position lights, and LED lane departure lights at rear, 15-pin socket as well as 2x7-pin sockets fixed on front cross beam, no connecting cables to tractor unit Load securing: * 9 pairs of folding lashing rings evenly distributed, tie-down force approx. 8 t * 7 pairs of folding lashing rings evenly distributed, tie-down force approx. 2.5 t * 2 pairs of folding lashing rings at rear, tie-down force approx. 2.5 t * Drilled holes for tension belts in outer frame every approx. 500 mm Stake pockets: * 16 stakes approx. 100/40 mm, usable length approx. 800 mm Stake pocket holders: * Each side 8 pockets integrated into outer frame * 4 rows of transverse stake pockets across the platform Floor: * Approx. 28 mm Z-hardwood floor set into outer frame Front wall: * Solid front wall, stake holder for 16 stakes approx. 100/40 * Front wall bolted to head frame Equipment: * 2 wheel chocks with holders * 2 PVC toolboxes, approx. 600/400/500 mm * Rear beacon holder including lamp * 2 pcs LED rear ...

Stanje: rabljeno, največja dovoljena obremenitev: 28.410 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2012, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 700 mm, FLIEGEL polpriklopnik s stranicami in 3 osmi Nosilnost: 28.410 kg TIP: SDS350 Zavora: disk Os: BPW + zračno vzmetenje 2x podporna točka (JOST) Dolžina: 13,60 m Širina: 2,40 m Višina: 0,70 m Z veseljem vam pomagamo tudi pri financiranju/leasingu v sodelovanju z našimi partnerji. Tsdewgghnspfx Acnsb Vse navedene informacije so brez jamstva. Pridržujemo si pravico do napak in vmesne prodaje.

Stanje: novo, dolžina tovornega prostora: 7.600 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 25 m³, Leto izdelave: 2025, Oprema: ABS, New vehicle! Purchase, rental, or lease with purchase option available upon agreement! Meiller 25m³ Thermo Tipper with Electric Sliding Cover – NEW! ---- * Manufacturer: Meiller * Model: MHPS44.3-N – Thermo Tipper Body * First registration: – (new vehicle) * Color: Tarp RAL 9006 White Aluminum, Chassis RAL 7021 Black Grey * Volume: approx. 25m³ (approx. 7.60m long x 2.30m wide x 1.50m high) * Axles: 3x BPW axles / 1st axle liftable / starting aid / disc brakes * Tires: 385/65 R 22.5 Tread S NEW * Suspension: Air suspension with raise and lower function * ABS / EBS * Tailgate with side toggle locks and rear wall sealing * Access step inside front left of the body * Angled front corners of the tipper body for improved material discharge * 5/6mm floor * 4mm side walls Tsdpfxswd Dhmj Acneb * 4mm front wall * 4mm rear wall * Chassis frame: welded construction from high-strength fine-grain steel * Fifth wheel height unladen: 1,247mm * Fifth wheel height laden: 1,217mm * Meiller electric sliding roof with radio remote control * Single wheel mudguards * Aluminum air tanks * ECAS with automatic lowering during tipping process * TPMS tire pressure monitoring system * Foldable underrun protection * Additional LED reversing spotlight New vehicle! Purchase, rental, or lease with purchase option available upon agreement! Notice regarding possible errors in this advertisement: Despite careful preparation, inadvertent mistakes in the text or specifications may occur. We assume no liability for errors, amendments, or prior sale. All information is provided without guarantee. Please contact us to verify details or clarify any questions.

Stanje: novo, največja dovoljena obremenitev: 28.960 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.600 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 25 m³, Leto izdelave: 2025, Brakes: * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * 22.5" disc brakes * Paver brake with shortened rear fenders and manual paver switch ---- Axles: * 3 x 9-ton BPW axles * 1st axle liftable with start-off aid ---- Suspension: * Air suspension with automatic lowering during the tipping process (for increased stability; can be deactivated for pavers) ---- Electrical / Lighting: * 1 x 15-pin trailer socket * LED rear lights * 1 x additional LED work light * Flashing side marker lights * Tire Pressure Monitoring System (TPMS) ---- General fittings: * Aluminum air tanks * Jost telescopic steel landing legs with plate foot (can be unhitched only when unladen) * 4 m aluminum access ladder, stored laterally right above the fenders * Closed individual plastic fenders * 4 m aluminum access ladder, stored above the fenders * Folding underrun protection * Rear towing eye * Access steps and external aluminum standing platform in front of the front wall ---- Frame: * Chassis made of high-strength fine-grain steel with Meiller-specific torsion cross members ---- Tipping body: * Half-shell rear tipping steel body (front-mounted hydraulic cylinder with medium working pressure) * Side walls with robust continuous inward-sloped top rail * Superimposed tailgate with rubber seal and 2 additional toggle fasteners as well as automatic 2-hook locking system ---- Thickness of base, side walls, front and rear wall: * Front and rear wall slanted * Front wall: 4 mm BS 70 steel * Side walls and tailgate: 4 mm HBW 450 steel * Tailored floor made of 5 / 6 mm HBW 450 steel ---- Tarpaulin: * Manual rolling tarpaulin - RAL 9006 white aluminum ---- Loading volume: * Approx. 25 m³ ---- Fifth wheel height: * Unladen approx. 1,247 mm * Laden approx. 1,217 mm ---- Paintwork: * Chassis painted in RAL 7021 black grey * Tipping body in RAL 9006 white aluminum ---- General information: * --Permissible total weight technically up to 39,000 kg-- Tjdpouqtcdsfx Acnob * Errors and prior sale excepted * New vehicle with manufacturer warranty ---- Delivery time: * Available from week 32/2026

Stanje: novo, največja dovoljena obremenitev: 18.800 kg, skupna masa: 22.000 kg, Leto izdelave: 2026, RSM Roll-off Container 38m³ with Hydraulic Rear Door and Grain Slide * Model: ECO-2 Tsdpfxswggn Uo Acnjb * Year of Manufacture: 2025 * Volume: 38m³ * Tare Weight: 3,200 kg * Payload: 18,800 kg * Gross Vehicle Weight Rating: 22,000 kg * Hydraulic Rear Door * Grain Slide * Perimeter Net Hooks The RSM universal container, a versatile solution for all requirements, complies with DIN 30722 Part 2 standards and is an ECO Type 2 model with a permissible total weight of 22,000 kg. For further information, please feel free to contact us.

Stanje: novo, največja dovoljena obremenitev: 28.600 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 25 m³, Leto izdelave: 2025, Braking System: * Wabco EBS-E / ABS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * 22.5" disc brakes * Paver brake with shortened rear mudguards and manual paver switch ----Axle: * 3 x 9 t BPW or SAF axles * Lifting axle with start-up aid ----Suspension: * Air suspension with automatic lowering during tipping process (to increase stability, can be deactivated for paver operation) ----Electrics / Lighting: * Tyre pressure monitoring system (TPMS) * 1 x 15-pin trailer socket * Eco-LED II lighting with protective housing * 1 x additional LED work light * Flashing side marker lights ----General Attachments: * Aluminium air tanks * Telescopic steel landing legs with plate foot (can only be uncoupled when unladen) * 4 m aluminium access ladder, positioned to the right side above the mudguards Tsdow Eg D Topfx Acnsb * Enclosed individual plastic mudguards * Folding underrun protection * Tow eye at the rear * Folding access ladder on the front left side * Document box on the front wall ----Chassis: * High chassis frame made of high-strength fine-grain steel with Meiller-specific torsion cross members ----Tipping Body: * Half-shell rear tipper body made of STEELECT 450 steel -HBW 450- * Front hydraulic cylinder with medium working pressure * Front wall with 600 mm front roof as tarpaulin carrier * Side walls with sturdy, continuous, inward-sloping top rail * Overlapping tailgate with rubber seal, 2 additional toggle locks and automatic 2-hook locking ----Thickness of Floor, Side Walls, Front and Rear Wall: * Front, side and rear wall 4 mm * Front and rear wall inclined * Tailored floor 5 / 6 mm ----Tarpaulin: * Electric sliding tarpaulin -RAL 9006 white aluminium- with manual switch on chassis and radio remote control ----Payload Volume: * Approx. 25 m³ ----Coupling Height: * Unladen approx. 1,350 mm * Laden approx. 1,340 mm ----Paintwork: * Chassis painted in RAL 7021 black grey * Tipping body in RAL 9006 white aluminium ----General Attachments: * --Technically feasible gross vehicle weight of 39,000 kg-- * Errors and prior sale excepted * New vehicle with manufacturer warranty ----Delivery Time: * Available immediately from Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 30.754 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2019, naslednji pregled (TÜV): 11/2026, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 1.300 mm, višina nakladalnega prostora: 2.420 mm, skupna širina: 2.550 mm, skupna višina: 3.150 mm, Oprema: ABS, Schmitz Cargobull prekucni polpriklopnik s 3 osmi Tjdpfjy Scpxox Acnsb 2x na zalogi Zavore: bobnaste Os: SAF z zaščitno ponjavo Dolžina: 7,20 m Širina: 1,30 m Višina: 2,24 m Z veseljem vam pomagamo tudi pri financiranju/leasingu v sodelovanju z našimi partnerji. Vse informacije brez garancije. Pridržujemo si pravico do napak in vmesne prodaje.

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * Profil PT 30: ----Zavore: * EBS (električni zavorni sistem) * Naprava za hitro sprostitev zavor za vzmetne akumulatorje * Bobnaste zavore ----Osi: * 3 x 11 ton, osi Gigant ----Vzmetenje: * Zračno vzmetenje s sistemom za dvigovanje in spuščanje ter ventilom RtR ----Povezava: * Povezava dolžine 1.200 mm s 40 mm vlačilnim ušesom in nastavitvijo višine s pomočjo vzmetne palice in objemke ----Elektrika / osvetlitev: * Pametna plošča, nameščena na prikolici, kot informacijsko orodje (za prikaz obremenitve osi – ločeno spredaj in zadaj) * Nadzor tlaka v pnevmatikah z možnostjo prikaza v tovornjaku prek signala EBS, brez dodatne namestitve v tovornjaku * 15-polni električni vtič * LED-osvetlitev 12 / 24 V * LED-rotacijska svetilka (odstranljiva) zadaj ----Splošni dodatni deli: * Stranski zaščitni element * Stranske podpore zadaj na okvirju * Mehansko nastavljivi paketi opozorilnih tabel spredaj in zadaj * Sprednji plastični četrtni blatniki z zaščito proti brizganju * Zadnji ravni jekleni ploščati ščiti z zaščito proti brizganju * Orodjarna škatla iz pocinkane jeklene pločevine, približno 650 x 300 x 600 mm, črna, prašno lakirana, na desni strani * Predal v podvozi za dodatno opremo s pokrovom, 2 kosa kontinentalskih zapah, trajno vgrajen (neposredno za podvozjem) * 2 kosa stopnic, pocinkanih, na podvozju, levo in desno ----Površina nizkega prikolice: * ROBOTER: varjena protidrsna prevleka na jekleni plošči podvozja (izstopajoči varjeni robovi) ----Varnostno pripenjanje tovora (paket za pripenjanje tovora, sestavljen iz): * 2 pritrdilne točke (13,4 tone) spredaj levo in desno na nosilcu čelne stene * Spredaj in zadaj 1 par UVV prstenov (13,4 tone), poleg tega stransko po 3 pare UVV prstenov (10 ton), z možnostjo nagibanja in spuščanja, obremenljivi v vse smeri in vgrajeni v zunanji okvir * Stransko po 3 žepe za pasove z možnostjo pripenjanja 2 ton * Profifix palica za pripenjanje v vzdolžni osi na sredini, v ravni površini za možnost pripenjanja do LC 3000 daN ----Razširitev: * 6 parov mehanskih iztegnih podpor za 3 m skupne širine (vendar ne na zadnji poševnici) * Razširitvene deske, položene v sredini tovorne površine ----Rampe: * hidr. enodelne rampe, približno 3.000 x 720 mm * mehansko, stransko nastavljive * Krmilni blok 4-na, za poznejšo vgradnjo hidravlične premika rampe ----Nosilec za bager: * Nosilec za bager čez zadnjo os, neprekinjen do končnega nosilca (skupna dolžina približno 2.100 mm) * 2 para pritrdilnih točk LC 6400 daN v nosilcu za bager, stransko v vzdolžnem okvirju ----Višina nakladanja: * obremenjen približno 910 mm +/- 20 mm zračno vzmetenje ----Lakiranje: * Podvozje, podvozje, iztegnine, podpore in rampe so vroče pocinkani * Osi, vrtljivi obroč, rezervoar za zrak, vlečna vilica so pobarvane v črni barvi Tsdpfsxptn Rox Acnjb ----Informacije: * Novo vozilo z garancijo proizvajalca * Napake in vmesna prodaja so pridržane ----Čas dostave: * dobavljivo od približno 45. tedna leta 2026

Stanje: rabljeno, prevoženi kilometri: 1.001 km, prva registracija: 01/1995, barva: oranžna, voznikova kabina: drugo, vrsta prenosa: drugo, prostornina tovornega prostora: 36 m³, dolžina tovornega prostora: 6.900 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 2.300 mm, Leto izdelave: 1995, Vehicle location: Bovenden, steel body. Configuration: steel dump body approx. 36 m³, double rear tailgate (hydraulic), removed from vehicle 61498, MB 2631 AK, wheelbase 4.5 m. ACCESSORY INFORMATION PROVIDED WITHOUT WARRANTY. Subject to change, prior sale, and errors excepted! Tjdpfxevhg Ape Acnob