Müller-Mitteltal 14,4 To. Tiefl. , Luftgefedert - Einschubrampen nakup rabljenega (27.215)

Stanje: novo, največja dovoljena obremenitev: 10.360 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic Brake System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lift and lower facility ----Drawbar / Flange Eye: * Drawbar height adjustable by approx. 300 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with in-cab display via EBS signal; no truck-side installation required) * LED lighting system * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Plastic toolbox, front right, mounted outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Provision for retrofitting 20" container locks at front and rear * Bolted bulkhead made of smooth sheet steel * Fold-down side walls, trapezoidal profile, with drop-side spring assists * Bolted, hot-dip galvanized rear stanchions ----Load Securing: * Outer frame with holes, approx. 45° angled, 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * Each of the front and rear corners fitted with 1 x 6.3 t lashing ring * Various holes in front and rear cross members for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for pneumatic and tracked vehicles; stowed at the rear in a compartment integrated below the deck in the chassis ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Vehicle fully hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to error and prior sale ----Delivery Time: Dcedpfx Aqspk D Dqoqsk * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.360 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 14.4: ----Braking System: * Electronic Braking System (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Towing Eye: * Drawbar height-adjustable by 300 mm Dcsdpfx Aqendpn Ssqjk * 40 mm flange towing eye ----Electrics / Lighting: * TPMS (tire pressure monitoring system with indicator function in the truck via EBS signal—no installation required on the truck side) * LED lighting system * 15-pin electrical connector ----General Accessories: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox mounted front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood floorboards * Preparation for subsequent installation of 20" container locks at front and rear * Bolted, smooth sheet metal front wall * Side walls made of trapezoidal-profiled steel, foldable with drop-side spring assist * Hot-dip galvanized bolt-on rear stanchions ----Load Securing: * Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing points every 480 mm * Option for 3 t folding lashing brackets every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in front and end crossmembers for 1.2 t securing points ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles, stored in a compartment underneath the loading area in the chassis, accessible from the rear ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Entire vehicle hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex works Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.400 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * ETK-TA-R 14,4: ----Zavore: * EBS * Naprava za sprostitev v sili za vzmetne zavorne cilindre * Bobnaste zavore ----Os: * 2 x 7 t. osi Gigant ----Vzmetenje: * Listnate vzmeti s tandem sistemom za izravnavo ----Vlečna palica / prirobnična vlečna palica: * Vlečna palica, višina nastavljiva za 300 mm, s prirobnično vlečno palico 40 mm ----Elektrika / osvetlitev: * Nadzor tlaka v pnevmatikah z možnostjo prikaza v vozilu prek signala EBS, brez vgradnje v vozilu * 15-polni vtič za elektriko * LED zadnje luči ----Splošni dodatni deli: * mehanska opora spredaj * zadaj 2 mehanski zložljivi opori * plastična orodjarna škatla, približno 750 x 350 x 300 mm, desna stran * vijakni zaščitni odbijač * plastični četrtni blatnik ----Okvir: * Glavni okvir iz finozrnatega jekla Dcodpetr Sucjfx Aqqsk ----Nakladalna platforma: * Mrežaste kljuke na straneh in zadaj v ležajih centralnega zaklepanja, ter 2 kosa na čelni steni * Jeklena paleta - dvostranska nakladalna platforma, čelna stena fiksna, izdelana iz gladke pločevine, neprekinjene stranske stene - z možnostjo odklopa, z vzmetjo za dvig stranske stene in nihajnim sistemom prek ročnega centralnega zaklepanja * Zadnji nosilci vijakni * Jeklena zadnja stena vstavljena pred rampami * V vsakem kotu po 1 x 5 t pritrdišč, ter na vsaki strani po 4 x 3 t pritrdišč, vstavljenih v zunanji okvir * 4 mm dno iz finozrnatega jekla ----Rampe: * Dvodelne mehanske rešetaste rampe z aluminijastim končnim delom 2.150 + 1.300 mm x 600 mm (ročno skupaj potiskane do 80 mm) ----Barvanje: * Podvozje, vlečna palica, zadnji nosilci, zaščitni odbijač, mehanske opore in rampe, pocinkane * Os, vzmeti, zračni rezervoar, prirobnična vlečna palica in opora, barvane v črni barvi * Stranske stene in nakladalna platforma v RAL 9010, čista bela * Barvanje stranskih sten in nakladalne platforme v drugem RAL odtenku je možno, po dogovoru ----Informacije: * Novo vozilo z garancijo proizvajalca * Pridržane napake in možnost prodaje ----Dobavni rok: * Na voljo takoj, iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 10.400 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * ETK-TA-R 14,4: ----Zavore: * EBS * Sistem za sproščanje zavor v sili za vzmetne akumulatorske cilindre * Bobnaste zavore ----Os: * 2 x 7 ton - osi Gigant ----Vzmetenje: * Parabolične vzmeti s tandem sistemom za izravnavo ----Vlečna palica / prirobnica vlečne palice: * Vlečna palica, nastavljiva po višini za 300 mm, s prirobnico vlečne palice 40 mm ----Elektrika / osvetlitev: Dcodpjtr St Ujfx Aqqok * Nadzor tlaka v pnevmatikah z možnostjo prikaza na vozilu prek signala EBS, brez dodatne namestitve na vozilu * 15-polni vtič za elektriko * LED zadnje luči ----Splošni dodatni deli: * mehanska opora spredaj * zadaj 2 mehanski zložljivi opori * plastična orodjarna škatla, cca 750 x 350 x 300 mm, desna stran * vijakljen podvozni ščit * plastični blatnik ----Okvir: * Glavni okvir iz fino zrnate jeklene zlitine ----Nakladalna prikolica: * Obešalne kljuke na boku in zadaj v ležajih centralne zapore, ter 2 kosa na čelni steni * Jeklena paletna nadstavba, dvostransko nakladalna prikolica, čelna stena fiksna, iz gladke pločevine, neprekinjene bočne stene - brez srednjih nosilcev, z možnostjo zlaganja s pomočjo vzmetne naprave in nihanja s pomočjo ročne centralne zapore * Zadnji nosilci vijačeni * Jeklena zadnja stena, vstavljena pred rampami * Na vogalih po 1 x 5 ton, privezni obroči, na boku pa po 4 x 3 tone, vstavljeni v zunanji okvir * 4 mm dno iz fino zrnate jeklene zlitine ----Rampe: * Dvodelne mehanske rešetaste rampe z aluminijastim končnim delom, 2.150 + 1.300 mm x 600 mm (ročno združljivi do 80 mm) ----Barvanje: * Podvozje, vlečna palica, zadnji nosilci, podvozni ščit, mehanske podpiralne opore in rampe, vroče pocinkani * Os, vzmeti, zračni rezervoar, prirobnica vlečne palice in podpiralne opore, pobarvani v črni barvi * Bočne stene in nakladalna prikolica v čisti beli barvi RAL 9010 * Barvanje bočnih sten in nakladalne prikolice v barvnem odtenku RAL je možno proti doplačilu ----Informacije: * Novo vozilo z jamstvom proizvajalca * Pridržujemo si pravico do sprememb in napak * Prodaja je možna, dokler je artikel na zalogi ----Dobavni rok: * Na voljo takoj iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assemblies ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, approx. 300 mm * 40 mm flange drawbar eye ----General Attachments: * Jost mechanical landing gear, front * External, hot-dip galvanized folding supports, rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted on front wall outside ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 15-pin power connector * LED tail lights ----Loading Platform: * 50 mm softwood floor * 20'' container locks mounted at front and rear * Bolted smooth steel front wall * Drop sides, steel, trapezoidal profile, drop-down with drop-side lifting springs * Hot-dip galvanized, bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing brackets every 600 mm (5 lashing rings fitted each side) * 1 x 6.3 t lashing ring fitted in each corner front and rear * Various holes in front and rear transverse beams for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear storage compartment integrated in the chassis below the loading area ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall Dodpfx Aqjl Thy Rsqeck * Drop side color in RAL 9010 pure white * Side panels can be painted in a RAL color at extra cost ----Info: * New vehicle without registration * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating aggregate ----Drawbar / Drawbar Eye: * Drawbar adjustable in height by 300 mm – drawbar extension by 250 mm to 2,250 mm * 40 mm flanged drawbar eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED tail lights 12 / 24 V * LED rotating beacon (removable) at rear ----General Attachments: * Support winch in front * Externally mounted hot-dip galvanized folding supports at rear * Plastic toolbox approx. 858 x 500 x 500 mm, front right, outside at the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Preparation in front of front wall for retrofitting container locks * Bolted front wall made of smooth sheet metal * Sidewalls made of trapezoidal profile steel sheet, foldable with drop-side spring-assisted lifting device * Steel rear wall can be slid between the ramps – storage bracket for unused rear wall inside by the front wall * Rear stanchions bolted * Rear approach angle approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick and 270 mm wide rubber strips on the inside of ramps * 12 mm thick and 210 mm wide rubber strips on the approach slope and externally on the low-bed platform (from front wall to end sill) ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t drop lashing rings every 600 mm possible * 1 x 6.3 t lashing ring at each front and rear corner * Various drill holes in front wall and end sill for 1.2 t lashing options ----Ramps: * One-piece mech. grating ramps with spring system for one-man operation, approx. 2,750 x 870 mm (can be compressed to 20 mm) ----Paintwork: * Chassis, drawbar, front wall, tailgate, and ramps hot-dip galvanized * Axles, springs, air tank, and flanged drawbar eye painted black * Sidewalls painted RAL 9010 pure white ----Info: * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * Errors and prior sale excepted * New vehicle with manufacturer’s warranty Dcsdpfx Aox Ipapsqqjk ----Delivery time: Vehicle is immediately available

Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * First inspection (ETÜ) - TA -R 14.4 ----Brake System: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange Eye: * Height-adjustable drawbar by approx. 300 mm - drawbar extension by 250 mm to 2,250 mm total length * 40 mm flange-type towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (without truck-side installation) * 15-pin electrical connector * LED rear lights 12 / 24 V * Removable LED beacon at rear ----General Attachments: * Landing leg at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, externally mounted on the front right end wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * Preparation in front of the bulkhead for later installation of container locks * Bolted smooth steel bulkhead * Foldable steel side walls with trapezoidal profile, with drop-side spring assist * Removable steel rear wall, stowable inside at the front of the bulkhead when not in use Dcsdpex Ipbaefx Aqqok * Bolted rear stanchions * Rear ramp bevel approx. 860 mm ----Flooring: * 50 mm softwood flooring * 12 mm thick and 270 mm wide rubber strips on the inside of the loading ramps * 12 mm thick and 210 mm wide rubber strips on the ramp bevel and on the exterior of the low loader platform (from front bulkhead to rear cross member) ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Possible installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each of the front and rear corners * Various drillings in the front and rear cross members for 1.2 t lashing options ----Ramps: * One-piece mechanical grating ramps with spring assistance for single-person operation, approx. 2,750 x 870 mm (collapsible to 20 mm thickness) ----Paint Finish: * Chassis, drawbar, front wall, tailgate, and ramps hot-dip galvanized * Axles, springs, air tanks, and flange eye painted in black * Side walls painted in RAL 9010 pure white ----Information: * Reinforced and certified superstructure according to EN 12642 XL, including load securing certificate * Subject to errors and prior sale * New vehicle with manufacturer’s warranty ----Delivery time: Vehicle is immediately available ex Eggerstorf

Stanje: novo, največja dovoljena obremenitev: 10.750 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14,4: ----Zavore: * Zavorna sistem – EBS * Sistem za hitro sprostitev zavor za vzmetne akumulatorje * Bobnaste zavore ----Os: Dedpjv Eq Evefx Aqqsck * 2 x 7 ton, osi Gigant ----Vzmetenje: * Listne vzmeti z izravnalnim agregatom ----Vlečna droga / prirobnična vlečna droga: * Vlečna droga, nastavljiva po višini za 300 mm * Podaljšek vlečne droge za 250 mm na 2.250 mm * 40-milimetrska prirobnična vlečna droga ----Elektrika / osvetlitev: * Sistem za nadzor tlaka v pnevmatikah (RDÜ) * 15-polni električni priključek * LED-osvetlitev ----Splošni dodatni deli: * Prednja oporna noga * Zunanja, zložljiva oporna noga zadaj * Plastična orodjarna škatla, približno 858 x 500 x 500 mm, spredaj desno zunaj na čelni steni * Stranski zaščitni element * Plastični četrtni blatnik ----Površina za prevoz: * 50 mm debela deska iz iglavcev * Pred čelno steno in zadnjo poševnino, priprava za naknadno namestitev pritrdil za 20-palčne kontejnerje * Vijata čelna stena iz gladke pločevine * Stranske stene iz jeklene pločevine – trapezno profilirane – z možnostjo zlaganja na sredini, 1-krat razdeljene * Jeklena zadnja stena, ki se potiska med nosilce rampe, kadar se ne uporablja, se shrani v notranjosti pred čelno steno * Zadnji okvir, vijata ----Pripomočki za pritrditev tovor: * Zunanji okvir z luknjami, narejen pod kotom približno 45 stopinj, z nosilnostjo 2 toni, vsakih 480 mm * Možnost vgradnje 3-tonskih pritrdilnih obročev vsakih 600 mm * Na vogalih, spredaj in zadaj, 1 x 6,3-tonska pritrditev * V čelni in zaključni palici različne luknje za 1,2-tonske pritrditve * ProfiFix pritrdilna letva na vzdolžni osi na sredini, za pritrditev do LC 3000 daN ----Rampe: * Enodelna mehanska rešetasta rampa z vzmetjo za delovanje z eno osebo, približno 2.750 x 600 mm (možnost potiskanja skupaj do 20 mm) * Zadnja nagnjena plošča, približno 860 mm, podvozje ----Medosna razdalja: * Medosna razdalja 1.140 ----Barvanje: * Vlečna droga, čelna stena, zadnja vrata, zložljive oporne noge in rampe, prevlečene z vročim cinkom * Os, vzmeti, rezervoar za zrak, prirobnična vlečna droga in oporna noga, prebarvane v črno barvo * Barvanje stranskih sten v RAL – 9010, čisto bela ----Informacije: * Okrepljena in certificirana nadgradnja po EN 12642 XL, vključno s certifikatom za pritrditev tovora * Novo vozilo z garancijo proizvajalca * Napake in predprodaja so vsebovane ----Dobavni rok: * Takoj na voljo iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 10.750 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14,4: ----Zavore: * Zavorna sistem – EBS * Naprava za izpust zavor v sili za vzmetne akumulatorje * Bobnaste zavore ----Os: * 2 x 7 ton Gigant osi ----Vzmetenje: * Parabolične vzmeti z izravnalnim mehanizmom ----Vlečna palica / prirobnična vlečna palica: * Vlečna palica, ki je nastavljiva po višini za 300 mm * Podaljšek vlečne palice za 250 mm na 2.250 mm * 40-milimetrska prirobnična vlečna palica ----Elektrika / razsvetljava: * RDÜ – nadzor tlaka v pnevmatikah * 15-polni električni vtič * LED-razsvetljava ----Splošni dodatni deli: * Podporni dvigalo spredaj * Zunanja zložljiva podpora zadaj * Plastična orodjarna škatla, približno 858 x 500 x 500 mm, spredaj na desni strani, na čelni steni * Stranska zaščita * Plastični četrtinarni blatnik ----Ploščad nizkega prikolice: * 50 mm ploščad iz iglastih plošč * Pred čelno steno in zadnjim naklonom, pritrdilna točka za naknadno montažo zapahov za transport 20-palčnih kontejnerjev * Vijična čelna stena iz gladke pločevine * Stranske stene iz jeklene pločevine - trapezno profilirane - zložljive, v sredini enkrat razdeljene * Jeklena zadnja stena, ki se lahko potisne med nosilce rampe, ko se ne uporablja, znotraj pred čelno steno * Zadnji nosilci, vijeni ----Pritrditev tovora: * Zunanji okvir z luknjami, nagnjen pod kotom približno 45 stopinj, z nosilnostjo 2 toni na vsakih 480 mm * Možna je vgradnja 3-tonske pritrdilne sponke na vsakih 600 mm * V vogalih spredaj in zadaj je po 1 pritrdilna točka z nosilnostjo 6,3 tone * V čelni in zaključni nosilni konstrukciji so različne luknje za pritrditev z nosilnostjo 1,2 tone * ProfiFix pritrdilna letev v vzdolžni osi, v sredini, za pritrditev do LC 3000 daN ----Rampe: * Enodelna mehanska rešetasta rampa z vzmetnim mehanizmom za upravljanje z eno osebo, približno 2.750 x 600 mm (lahko se potisne skupaj do 20 mm) * Zadnji naklon, približno 860 mm, podvozje Dcedpfx Aqov D Tcbeqsk ----Medosna razdalja: * Medosna razdalja 1.140 ----Barvanje: * Vlečna palica, čelna stena, zadnja vrata, zložljive podpore in rampe so pocinkane * Os, vzmeti, zračna posoda, prirobnična vlečna palica in podporni dvigalo so pobarvani v črni barvi * Barvanje stranskih sten v barvi RAL 9010, čista bela ----Informacije: * Ojačana in certificirana nadgradnja po EN 12642 XL, vključno s certifikatom za pritrditev tovora. * Novo vozilo z garancijo proizvajalca. * Pridržana možnost sprememb in napak. ----Dobavni rok: * Na voljo takoj iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14,4: Dcedpfx Ajxglibjqqok ----Zavore: * bobnaste zavore * elektronski zavorni sistem (EBS) * naprava za izpust zraka iz zračnih posod v primeru izredne zavore ----Osi: * 2 x 7 ton Gigant osi ----Vzmetenje: * parabolične vzmeti z izravnalnim agregatom ----Vlečna priprava / priključna priprava: * vlečna priprava, višina nastavljiva za 300 mm * podaljšek vlečne priprave za 250 mm (na 2.250 mm) * 40-milimetrska priključna priprava ----Osvetlitev / električni sistem: * sistem za nadzor tlaka v pnevmatikah (RDÜ) * LED osvetlitev ----Splošni dodatni deli: * Jost podpirala spredaj * zunanja, pocinkana, zložljiva podpirala zadaj * plastična orodjarna škatla spredaj na desni strani, na čelni steni * stranski zaščitni odbijač * plastični blatniki ----Platforma za težke tovore: * 50 mm debela deska iz iglavcev * pred čelno steno je naprava za kasnejšo montažo zaklepnih mehanizmov za kontejnerje * vijakoma pritrjena čelna stena iz gladke pločevine * stranske stene iz jeklene pločevine – trapezno profilirane – z možnostjo odpiranja in pomočjo vzmetne naprave za dvižne stene * jeklena zadnja stena, ki jo je mogoče vstaviti med rampe – nosilec za uporabo, ko se ne uporablja, je nameščen na notranji strani čelne stene * zadnje vzdolžne nosilce je mogoče vijačiti ----Pripravki za pritrditev tovora: * perforiran zunanji okvir, približno 45 stopinj nagneten, z nosilnostjo 2 toni na vsakih 480 mm * možna vgradnja 3-tonske pritrdilne palice na vsakih 600 mm * v kotih spredaj in zadaj je nameščena 1 x 6,3 tonska pritrdilna palica * v čelni in zadnji prečki so različne luknje za pritrditev tovora (nosilnost 1,2 tone) ----Rampe: * enodelne mehanske rešetaste rampe z vzmetjo za eno osebo, približno 2.750 x 600 mm (lahko se združijo do 20 mm) * naklon spredaj zadaj približno 860 mm ----Barvanje: * pocinkano podvozje, vlečna priprava, čelna stena, rampe in zadnja stena * barva dvižne stene v RAL 9010, čista bela * barvanje stranskih sten v barvnem odtenku RAL je na voljo po dogovoru ----Informacije: * --Ojačana in certificirana nadgradnja po standardu EN 12642 XL, vključno s certifikatom za pritrditev tovora-- * Novo vozilo z garancijo proizvajalca * Pridržujemo si pravico do sprememb in napak * Dostava: * dostavljivo od približno 41. tedna 2026

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14,4: ----Zavore: * bobnaste zavore * elektronski zavorni sistem (EBS) * naprava za izpust zraka v primeru izredne zavore za vzmetne akumulatorje ----Osi: * 2 x 7 ton, osi Gigant ----Vzmetenje: * parabolične vzmeti z izravnalnim agregatom ----Vlečna palica / prirobnična vlečna palica: * vlečna palica, višina nastavljiva za 300 mm * podaljšek vlečne palice za 250 mm (na 2.250 mm) * 40-milimetrska prirobnična vlečna palica ----Osvetlitev / električna napeljava: * RDÜ (nadzor tlaka v pnevmatikah) * LED-osvetlitev ----Splošni dodatni deli: * sprednji opornik Jost * zunanji, vročepocinkani zložljivi oporniki zadaj * plastična orodjarna škatla spredaj na desni strani na čelni steni * stranski zaščitni element Djdpfx Asxglh Reqqeck * plastični zaščitni element za četrt kolesa ----Nosilna površina: * 50 mm debela deska iz iglavca * pred čelno steno naprava za naknadno namestitev zaklepnih mehanizmov za kontejnerje * vijična čelna stena iz gladke pločevine * stranske stene iz jeklene pločevine - trapezno profilirane - z možnostjo zlaganja s pomočjo vzmetnega dvigala za stransko steno * zadnja jeklena stena, ki se lahko vrine med rampe - pritrdilni element, ki se uporablja, ko se ne uporablja, notri pred čelno steno * zadnji nosilci, vijični ----Pripomočki za pritrditev tovora: * perforiran zunanji okvir, nagnjen pod kotom približno 45 stopinj, z nosilnostjo 2 toni na vsakih 480 mm * možna je vgradnja 3-tonske pritrdilne zanke na vsakih 600 mm * v kotih spredaj in zadaj po 1 pritrdilna točka z nosilnostjo 6,3 tone * na čelni in zaključni palici različne vrtine za možnost pritrditve z 1,2 tone ----Rampe: * enodelne mehanske rešetaste rampe z vzmetjo za delovanje z eno osebo, približno 2.750 x 600 mm (možnost zlaganja do 20 mm) * naklon na zadnji strani približno 860 mm ----Barvanje: * vročepocinkano podvozje, vlečna palica, čelna stena, rampe in zadnja stena * barva stranske stene RAL 9010, čista bela * barvanje stranskih sten v barvnem odtenku RAL je možno za doplačilo ----Informacije: * --ojačana in certificirana nadstavba v skladu s standardom EN 12642 XL, vključno s certifikatom za pritrditev tovora-- * novo vozilo z garancijo proizvajalca * napake in medvmesna prodaja pod pridržkom ----Dobavni rok: * na voljo približno od 41. tedna leta 2026

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14,4: ----Zavore: * bobnaste zavore * elektronski zavorni sistem (EBS) * naprava za izredno sprostitev zavor za cilindrične zavorne akumulatorje ----Osi: * 2 x 7 t Gigant osi ----Vzmetenje: * parabolične vzmeti z izravnalnim agregatom ----Potezna prikolica / prikolica s prikolico: * višina potezne prikolice nastavljiva za 300 mm * podaljšek potezne prikolice za 250 mm na 2.250 mm * 40 mm prikolica s prikolico ----Osvetlitev / Elektrika: * sistem za nadzor tlaka v pnevmatikah (RDÜ) * LED osvetlitev ----Splošni dodatni deli: * sprednji podpiralni mehanizem Jost * zunanji pocinkani, zložljivi podpiralni nogari na zadnji strani * plastična orodjarna škatla na sprednji desni strani na čelni steni * stranski zaščitni element * plastični stranski odbijač ----Ploščad prikolice: * 50 mm deska iz iglastih vrst lesa * pred čelno steno naprava za naknadno montažo zaklepnih mehanizmov za kontejnerje * čelna stena, privita iz gladke pločevine * stranske stene iz jeklene pločevine - trapezno profilirane - z možnostjo zlaganja s pomočjo vzmetnih dvigal za stransko steno * jeklena zadnja stena, ki se lahko potisne med rampe - nosilec, ko se ne uporablja, na notranji strani pred čelno steno * zadnji okvir, privit ----Varovanje tovora: * luknjan zunanji okvir, nagnjen za približno 45 stopinj, z 2 t vlečne sile na vsakih 480 mm * možna vgradnja 3 t pritrdilnih točk na vsakih 600 mm * na vogalih spredaj in zadaj po 1 x 6,3 t pritrdilna točka * v čelni in končni nosilni konstrukciji različne luknje za 1,2 t možnost pritrditve Dedpfjq Dyvvsx Aqqeck * pritrdilna letva Profifix na vzdolžni osi, na sredini, za možnost pritrditve do LC 3000 daN ----Rampe: * enodelne mehanične rešetaste rampe z vzmetjo za delovanje z eno osebo, približno 2.750 x 600 mm (lahko se potisnejo skupaj do 20 mm) * sprednji naklon na zadnji strani, približno 860 mm ----Barvanje: * pocinkana šasija, potezna prikolica, čelna stena, rampe in zadnja stena * barva stranske stene v RAL 9010, čisto bela * barvanje stranskih sten v RAL barvnem odtenku je možno proti doplačilu ----Informacije: * --Okrepljena in certificirana konstrukcija po EN 12642 XL, vključno s certifikatom za varovanje tovora-- * novo vozilo s proizvajalčevo garancijo * napake in vmesna prodaja pridržane ----Dobavni rok: * takojšen dobavni rok iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14,4: ----Zavore: * bobnaste zavore * elektronski zavorni sistem (EBS) * naprava za izredno sprostitev zavor za vzmetne akumulatorje ----Osi: * 2 x 7 ton, osi Gigant ----Vzmetenje: * parabolično vzmetenje z izravnalnim agregatom ----Potezna priprava / priključna priprava: * potezna priprava, nastavljiva po višini za 300 mm * podaljšek potezne priprave za 250 mm (na 2.250 mm) * 40 mm priključna priprava ----Osvetlitev / električna napeljava: * RDÜ (nadzor tlaka v pnevmatikah) * LED osvetlitev ----Splošni dodatni deli: * sprednji podpiralni stojalo Jost * zunanja, vroče pocinkana, zložljiva podpiralna stojala na zadnji strani * plastična orodjarna škatla na sprednji desni strani, na čelni steni * stranska zaščita * plastični četrtni blatoohranilnik ----Ploščad nizkopodsestnega priklopnika: * 50 mm iglasta lesena plošča * pred čelno steno naprava za naknadno namestitev kontainerjev * vijolična čelna stena iz gladke pločevine * stranske stene iz jeklene pločevine – trapezno profilirane – zložljive s pomočjo vzmetnih dvigal Dcedpfervvflex Aqqok * jeklena zadnja stena, ki jo je mogoče vrinati med rampe – držalo pri neuporabi znotraj, pred čelno steno * zadnja ograja, vijolična ----Varovanje tovor: * luknjast zunanji okvir, upognjen pod kotom približno 45 stopinj, z 2 t vlečne sile na vsakih 480 mm * možna je vgradnja 3 t pritrdilnih elementov za pritrditev tovora na vsakih 600 mm * v vogalih na sprednji in zadnji strani po 1 pritrdilni element s 6,3 t vlečne sile * v čelni in zaključni prečki različne luknje za pritrditev tovora z 1,2 t vlečne sile * Profifix pritrdilna letva v vzdolžni osi, na sredini, za pritrditev tovora do LC 3000 daN ----Rampe: * enodelne mehanične rešetaste rampe z vzmetnim mehanizmom za delovanje z eno osebo, približno 2.750 x 600 mm (mogoče jih je pomikati skupaj na 20 mm) * nagib za vožnjo na zadnji strani, približno 860 mm ----Barvanje: * vroče pocinkano podvozje, potezna priprava, čelna stena, rampe in zadnja stena * barva stranic v RAL 9010, čista bela * barvanje stranskih sten v enem RAL odtenku je možno po dogovoru ----Informacije: * --ojačan in certificiran nadgradnji po EN 12642 XL, vključno s certifikatom za varovanje tovor-- * novo vozilo z garancijo proizvajalca * napake in vmesna prodaja pridržane ----Dobavni rok: * takoj na voljo iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 14.400 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-ER 19.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes Dcsdpfx Aqjmi Tmasqsk ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering device ----Drawbar / Flange Towing Eye: * Drawbar with 50 mm flange towing eye, height-adjustable by 110 mm via offset plate ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * LED tail lights 12/24 Volt ----General Attachments: * Jost landing leg at the front * External folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side * Side underrun protection * Plastic quarter mudguards ----Low-loader Platform: * Reinforcement package on chassis for drilling rig transport * 50 mm softwood floor, clamped type * Preparation in front of front wall for retrofitting container locks * Bolted smooth plate front wall * Split steel side walls – trapezoidal profile – foldable with central folding stanchion * Steel rear wall slide-in between ramps – bracket for storage in front wall when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45-degree angled, with 2 t lashing force every 480 mm * Option for installation of 3 t drop lashing rings every 600 mm * Lashing package: 1 x 10 t UVV lashing ring in each front and rear corner, 2 x 8 t UVV retractable lashing rings each side in the outer frame, various holes for 1.2 t lashing options in the front and rear crossmembers ----Ramps: * One-piece slide-in ramps 12 t/pair, ramps approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm ----Loading Height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ----Tyres / Wheelbase: * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, rear flap, folding supports and access ramps hot-dip galvanized * ---Axles, air tanks, flange towing eye and landing leg painted in a shade of black--- * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: Dcjdpsrwc R Refx Aqqek * Parabolic springs with equalizing device ----Drawbar / Flange Hitch Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Fittings: * Landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, fitted front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * 50 mm softwood floor * Provisions in front of the bulkhead for retrofitting container locks * Bolt-on 400 mm bulkhead made of smooth sheet * Removable rear stanchions, bolted * Drop sides with spring assist ----Load securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t retractable lashing rings every 600 mm * 1 x 6.3 t lashing point in each front and rear corner * Various holes in the headboard and rear crossmember for 1.2 t lashing options * Profifix lashing rail centrally positioned along the longitudinal axis for securing up to LC 3000 daN ----Ramps: * One-piece hydraulic mesh drive-on ramps, approx. 2,750 x 600 mm (collapsible to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump output on the truck of over 40 l/min up to max. 140 l/min) ----Painting: * Chassis, drawbar, bulkhead, mechanical drop supports and drive-on ramps hot-dip galvanized * Axles, springs, air reservoirs, landing gear front, and flange hitch eye painted in black shade * Drop sides painted in RAL 9010 pure white * Painting of the side walls in a RAL color of your choice available at extra charge ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-R 14.4 ----Brake System: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm up to 2,250 mm * 40 mm flange towing eye ----Lighting / Electrical: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12 / 24 V * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox mounted externally at the front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Trapezoidal-profiled, fold-down steel side walls with drop-side spring assists * Steel rear wall, can be stowed between the ramp holders when not in use, inside in front of the bulkhead * Bolted rear stanchions Dcjdpeq Dyvyjfx Aqqsk * Rear drive-on slope approx. 860 mm ----Load Securing: * Perforated outer frame, edged at approx. 45 degrees with 2 t lashing capacity every 480 mm * Installation of 3 t fold-down lashing rings possible every 600 mm * 1 x 6.3 t lashing ring at each front and rear corner * Various holes for 1.2 t lashing options in bulkhead and rear crossmember ----Ramps: * One-piece mechanical grating drive-up ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (collapsible down to 20 mm) ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, rear wall, tailgate, and drive-up ramps * Side wall color in RAL 9010 pure white * Painting of side walls in any RAL color available at extra cost ----Info: * — Reinforced and certified body according to EN 12642 XL including load securing certificate — * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-R 14.4 ----Braking System: * EBS Electronic Braking System * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Tow Bar / Flange Towing Eye: * Height-adjustable tow bar, adjustable by 300 mm * Tow bar extension by 250 mm to a total of 2,250 mm * 40 mm flange towing eye ----Lighting / Electrics: * Tire pressure monitoring system (TPMS) * LED rear lights 12 / 24 V * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox on the front right side of the headboard * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Preparation in front of the headboard for retrofitting container locks * Bolted headboard made of smooth sheet metal * Trapezoidal profiled drop-side walls made of steel, foldable with drop-side spring assist * Steel rear wall insertable between ramp mounts; when not in use, stowed inside in front of the headboard Djdpspk Dv Rsfx Aqqsck * Bolt-on rear posts * Rear approach angle approx. 860 mm ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Possible installation of 3 t drop lashing rings every 600 mm * One 6.3 t lashing point in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing options ----Ramps: * One-piece mechanical grid ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be telescoped down to 20 mm) ----Painting: * Hot-dip galvanized chassis as well as tow bar, headboard, rear wall, tailgate, and ramps * Side wall color RAL 9010 pure white * Painting of side walls in a RAL color of choice available at extra cost ----Information: * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately ex works Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle units ----Suspension: * Parabolic springs with balancing unit ----Drawbar / Flange Eye: * Drawbar height adjustable by approx. 300 mm * 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at front * Bolt-on, hot-dip galvanized folding supports at rear (external) * Side underrun protection * Plastic quarter mudguards * Plastic toolbox on front right, externally mounted on front wall ----Electrics / Lighting: * Tyre pressure monitoring system (TPMS) Dcedpfx Aqol Tilxjqek * 15-pin power connector * LED tail lights ----Load Area: * 50 mm softwood floor * 20" container locks mounted at front and rear * Bolted bulkhead made of smooth steel sheet * Drop sides made of trapezoidal-profile steel sheet, foldable with sideboard spring lifter * Hot-dip galvanized bolted rear stanchions ----Load Securing: * Perforated outer rail, edged at approx. 45°, with lashing capacity of 2 t every 480 mm * Optional 3 t folding lashing brackets every 600 mm (five lashing rings mounted per side) * One 6.3 t lashing ring in each corner, front and rear * Various bores in front and rear crossmembers for 1.2 t lashing points ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear storage compartment recessed into the chassis frame under the loading area ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Sideboard colour in RAL 9010 pure white * Painting of side walls in a RAL colour of choice available at extra charge ----Information: * New vehicle, not registered * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic leaf springs with equalizing unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with in-cab display via EBS signal—no in-cab installation required * 15-pin power connector * LED lighting system, 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * External folding rear support legs * Plastic toolbox approx. 858 x 500 x 500 mm, front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Provision in front of the bulkhead for retrofitting container locks * Bolted 400 mm smooth steel bulkhead * Bolted rear stanchions * Side walls with spring assist ----Load Securing: * Perforated outer frame, angled at approx. 45°, with 2 t lashing capacity every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing points * Profifix lashing rail along the centerline for lashing capabilities up to LC 3000 daN ----Ramps: * One-piece hydraulic grating ramps, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump performance in the truck of over 40 l/min up to max. 140 l/min) Dcsdpfx Aqorwc R Aoqek ----Paintwork: * Chassis, drawbar, bulkhead, mechanical drop supports, and ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange towing eye painted in a black shade * Side wall paintwork in RAL 9010 pure white * Painting of the side walls in an RAL color of choice available at an extra charge ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images shown ----Delivery time: * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 14.400 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-ER 19.0: ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange Eye: * Drawbar with 50 mm flange eye and height adjustment of 110 mm by offset plate ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED tail lights 12 / 24 Volt ----General Attachments: * Jost landing gear, front * External folding supports, rear * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Reinforcement package for drilling rig transport on chassis * 50 mm softwood flooring, clamped * Preparation in front of front wall for subsequent installation of container locks * Bolted front wall, smooth sheet * Split side walls, steel sheet, trapezoidal profile—foldable with central folding stakes * Steel rear wall, sliding between ramps—holder inside front wall when not in use * Bolt-on rear stakes ----Load Securing: * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Option to install 3 t fall-arrest lashing rings every 600 mm * Load securing package: Each front and rear corner 1 x 10 t UVV lashing ring, each side 2 x 8 t UVV retractable lashing rings in outer frame; in front and end crossmember various bores for 1.2 t lashing options ----Ramps: * One-piece sliding ramps 12 t / pair, approx. 2,750 x 620 mm * Rear approach slope approx. 860 mm ----Loading Height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ----Tires / Wheelbase: * Wheelbase: 1,810 mm * Tires: 235/75 R17.5 ----Paintwork: * Chassis, drawbar, front wall, tailgate, folding supports, and loading ramps hot-dip galvanized * ---Axles, air reservoirs, flange eye, and landing gear painted black--- * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf Dodpfx Ajmi Tcqoqqock

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * KA-TA-R 14,4 ----Zavore: * Wabco EBS * Sistem za hitro sprostitev zračnih cilindrov vzmetne zavore * Bobnaste zavore ----Osi: * 2 x 7 ton, osi Gigant ----Vzmetenje: * Parabolične vzmeti s tandem sistemom za izravnavo ----Vlečna prikolica / priključni element: Vlečna prikolica, ki je nastavljiva po višini za 300 mm, vroče pocinkana, s 40 mm priključnim elementom ----Splošni dodatni deli: * Sprednja mehanska opora Jost * Zadaj 2 mehanski, vroče pocinkani zložljivi opori * Vroče pocinkana vijolična zaščita podvozja Dcsdpfjv Dz N Nsx Aqqsk * Orodjarna škatla iz pocinkane jeklene pločevine na desni strani * Plastični ščitniki za kolesa * Dvosmerne stopnice na levi strani, kot pomoč pri vstopanju ----Elektrika / osvetlitev: * Sistem za nadzor tlaka v pnevmatikah (RDÜ) * 15-polni vtič * LED zadnje luči ----Nakladalna ploščad: * Jeklena, 3-stranska nakladalna ploščad * Neprekinjene stranske stene z notranjo ojačitvijo - brez srednjih nosilcev - z možnostjo zlaganja s pomočjo vzmetnih dvigal za stranske stene * Zložljiva zadnja vrata in možnost nagiba z ročno centralno ključavnico * Vroče pocinkani zadnji nosilci, vijeno pritrjeni * 4 mm debela pločevina talne površine iz fino zrnatega jekla * Oči za pritrditev mreže, vodila na zadnji strani za pritrditev nakladalnih ramp * Priprava za kasnejšo vgradnjo nadstavkov za stranske stene ----Podvozje: * Vroče pocinkano podvozje ----Pritrditev tovora: * V vsakem kotu po 1 x 5 ton pritrdišče, na vsaki strani po 4 x 3 tone pritrdišča, vgrajena v zunanji okvir ----ALU nakladalne rampe: * 1 par ALU nakladalnih ramp, približno 3.570 x 400 mm (nosilnost 8 ton / par), primerna za vozila s pnevmatikami in gosenicami * Zaklenljiv prostor za shranjevanje pod nakladalno površino, vgrajen v podvozje ----Pnevmatike: * Pnevmatike 385/55 R 22,5 ----Barvanje: * Osi, vzmeti, rezervoarji zraka in opore pobarvane v črni barvi * Podvozje, vlečna prikolica, talna površina, čelna stena, zložljive opore, vroče pocinkane * Stranske stene pobarvane v želeni RAL barvi (vendar ne posebne ali metalik barve), barva se lahko spremeni do približno 6 tednov pred dokončanjem ----Informacije: * Nadgradnja je ojačana in ima certifikat za pritrditev tovora po standardu EN 12642 XL * Novo vozilo brez prve registracije, z garancijo proizvajalca * Pridržane napake in možnost predčasne prodaje ----Dobavni rok: * Dostavljivo od približno 45. tedna leta 2026

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * KA-TA-R 14,4 ----Zavore: * Wabco EBS * Naprava za sprostitev zavor v primeru izrednih razmer za vzmetne akumulatorje * Bobnaste zavore ----Osi: * 2 x 7 ton, osi Gigant ----Vzmetenje: * Listnate vzmeti s tandem sistemom za izravnavo ----Vlečna droga / prirobnična vlečna droga: Vlečna droga, ki je nastavljiva po višini za 300 mm, pocinkana z vročim potopom, z 40 mm prirobnično vlečno drogo ----Splošni dodatni deli: * Spredaj mehanska podpora Jost * Zadaj 2 mehanski, pocinkani podpirali, zložljivi * Pocinkana podvozna zaščita, privita * Orodjarna škatla iz pocinkane jeklene pločevine, desna stran * Plastični četrt blatnika * Dvostopenjska stopnica na levi strani, kot pomoč pri vstopanju ----Elektrika / razsvetljava: * Sistem za nadzor tlaka v pnevmatikah RDÜ * 15-polni vtič * LED zadnje luči ----Nakladalna platforma: * Jeklena, 3-stranska nakladalna platforma * Stranske stene, povezane z notranjimi cevastimi okrepili - brez srednjih nosilcev - zložljive z vzmetjo za dvižno stranico * Zadnja vrata, zložljiva in nihajna, upravljana s centralnim zaklepanjem * Pocinkane zadnje letve, privite * 4 mm debelo dno iz fino zrnatega jekla * Obešalne mreže, pritrdilna tirnica na zadnji strani za nakladalne rampe * Priprava za kasnejšo vgradnjo dodatnih stranic ----Šasi: * Pocinkana šasi ----Pritrditev tovorja: * V vogalih po 1 x 5 ton pritrdišč in na vsaki strani po 4 x 3 tone pritrdišč, vgrajenih v zunanji okvir ----Aluminijaste nakladalne rampe: * 1 par aluminijastih nakladalnih ramp, približno 3.570 x 400 mm (nosilnost 8 ton / par), primerne za vozila z gumijastimi ali goseničnimi pogoni * Zaklepni prostor na zadnji strani, pod nakladalno površino, vgrajen v šasi ----Pnevmatike: * Pnevmatike 385/55 R 22,5 ----Barvanje: * Osi, vzmeti, rezervoarji zraka in podpore, pobarvani v črni barvi * Šasi, vlečna droga, dno, čelna stena, zložljive podpore, pocinkane z vročim potopom * Barvanje stranic v RAL 9010, čista bela * Barvanje stranskih sten v barvi RAL po želji, ob doplačilu Dsdpfxel Th A Es Aqqock ----Informacije: * Nadgradnja ojačana z certifikatom za pritrditev tovorja po standardu EN 12642 XL * Novo vozilo brez prve registracije z garancijo proizvajalca * Pridržujemo si pravico do sprememb in napak ----Dobavni rok: * Na voljo od približno 45. tedna 2026

Stanje: novo, največja dovoljena obremenitev: 12.200 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * TM-TA 14.4: ----Brakes: * Wabco EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable, hot-dip galvanized drawbar +/- 150 mm * 40 mm flange towing eye ----Electrics / Lighting: * 15-pin power connector * LED tail lights * RDÜ tyre pressure monitoring system ----General Attachments: * Jost support winch at the front * 2 x external drop-down supports at the rear * Closed single plastic mudguards * Folding A-board at the rear * Plastic underride guard buffer * Hot-dip galvanized approach protection with integrated chain storage box, W = 370 mm x D = 420 mm x H = 480 mm, at the front left & right ----Load Securing: * Each side with 2 x 5.3 t UVV lashing rings for attaching tensioning elements ----Trough Stops: * 2 removable trough stops for lateral centering of the troughs * Front trough stops pluggable in 4 positions with swivel-mounted stop ----Painting: * Hot-dip galvanized chassis * Axles, springs, air tanks and support winch painted in black ----Information: * Errors and prior sale excepted * New vehicle with manufacturer's warranty ----Delivery time: Dcedpfx Aqsl Thyqjqsk * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 12.200 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * TM-TA 14.4: ----Braking system: * Wabco EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange drawbar eye: * Height-adjustable, hot-dip galvanized drawbar, +/- 150 mm * 40 mm flange-type drawbar eye ----Electrics / Lighting: * 15-pin electrical connector * LED tail lights * RDÜ tire pressure monitoring system ----General equipment: * Jost landing gear at front * 2 x external drop-down support legs at rear * Enclosed single plastic mudguards Dcedpfx Aspk Dyxoqqok * Foldable A-board at rear * Plastic underride protection buffer * Hot-dip galvanized underrun protection with integrated chain storage box, W= 370 mm x D= 420 mm x H= 480 mm, front left & right ----Load securing: * 2 x 5.3 t UVV lashing rings each side for attaching tensioning elements * Includes 2 ratchet tensioners permanently mounted to the outer frame with chain box * Equalizer chain both sides with eyelet and quick shortening hook, Y-special version 6.3 t ----Container stops: * 2 removable container stops for lateral centering of containers * Container stops at front, pluggable in 4 positions, with pivoting stop ----Paintwork: * Hot-dip galvanized chassis * Axles, springs, air tanks and landing gear painted in a shade of black ----Information: * Tension force with load securing certificate * Errors and prior sale excepted * New vehicle with manufacturer's warranty ----Delivery time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Platform Trailer: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lifting and lowering device ----Drawbar / Flange Eye: * Drawbar height-adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (results in a B-dimension of approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reverse lights at the rear (activated by reverse gear) * 1 removable LED beacon (including bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning panel sets at front and rear * Support winch at front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm, one on each side left & right * Side underrun protection * Rear underrun protection * Plastic quarter fenders ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable for 3 m container external width) and lockable; locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN compliant) with a total external width of 3,000 mm ----Load Securing: * Perforated outer frame approx. 45° bent with 2 t lashing force every 480 mm * Installation of 3 t lashing brackets possible every 600 mm - 5 x 3 t UVV-lashing brackets mounted per side * In each front and rear corner 1 x 6.3 t lashing ring (front directly behind the container locks in the wooden floor and rear in the end crossmember) * Various drillings in front wall and end crossmember for 1.2 t lashing options ----Ramps: * 1 pair of aluminium slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tired and tracked vehicles * Storage compartment under the loading platform at the rear, integrated into the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air tanks, front support winch and flange towing eye painted in a shade of black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: Dcodpfxov D Tbkj Aqqek * Available from CW 39/2026