Fliegl 3-Achs Gardinensattel Standard Xtra-Long nakup rabljenega (50.639)

Stanje: rabljeno, lastna masa: 8.620 kg, največja dovoljena obremenitev: 36.380 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 13.550 mm, vzmetenje: zrak, velikost pnevmatike: 445/45R19,5 160J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 445/45R19,5 160J, velikost zadnje pnevmatike: 445/45R19,5 160J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Malo rabljeno, višina nakladalne platforme približno 990 mm, 12 x zaporni elementi za kontejnerje, za 1 x 20-čevni ali 2 x 20-čevna ali 1 x 40-čevni kontejner, dodatno plačilo za nakladalne rampe 1.000 €, – tiskarske napake, spremembe in napake pridržane, vzorčne slike, več podatkov na: !, Več podrobnosti: ! Todozvpf Sepfx Acnob

Stanje: rabljeno, prva registracija: 04/2008, Leto izdelave: 2008, SCHWARZMÜLLER TAUTLINER Polpriklopnik s drsnimi ponjavami XL - certifikat Na voljo 2 kosa!! • ABS • 3 x Mercedes osi s pnevmatskim vzmetenjem • dvižna os • sistem za dviganje/spuščanje • kolutne zavore • EDSCHA streha • nosilec za rezervno kolo • lesen pod • 3 x skladiščni zaboj • Notranje mere: 13.620 x 2.500 x 2.800 mm (D x Š x V) Tedpewmppujfx Acnjb • Lastna teža: 6.340 kg • Skupna masa: 36.000 kg (tehnično možno 39.000 kg!) • Pnevmatske gume: 385/55 R22.5 - nemški polpriklopniki! - Nov tehnični pregled! Pridržujemo si pravico do sprememb in predhodne prodaje!

Stanje: rabljeno, največja dovoljena obremenitev: 13.390 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2000, naslednji pregled (TÜV): 10/2026, Schwarzmüller tristrani kiper v dobrem stanju ---- Tehnične specifikacije: Splošno: * Osna obremenitev spredaj: 9.000 kg * Osna obremenitev zadaj: 9.000 kg Kabina: * Hladilnik: Ne Motor: * AdBlue: Da Menjalnik: * Retarder: Ne Podvozje: * Vzmetenje: zračno vzmetenje * Aluminijasta platišča: Ne * Dvižna os: Ne * Krmilna os: Ne * Dovoljena osna obremenitev: 9.000 kg Sedlo: * Spuščeni sedelni zatič: Ne Dokumenti: * Lastna masa: 4.600 kg * Tehnični pregled velja do: 10/2026 Tsdpfx Acjy Rwpwsnob

Stanje: novo, lastna masa: 11.000 kg, največja dovoljena obremenitev: 38.500 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Load Area: - Extendable loading area with rear taper approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses fitted with square climbing strips 15 x 15 mm, including lower extensions - Between the 1st and 2nd axle, a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the bevel as well as protruding into the loading area for parking excavator dipper stick approx. 2,900 x 750 x 210/290 mm - 1 pair of lashing rings, installed flat at the front of the load area (LC 10,000 daN) - 5 pairs of folding lashing rings on the outside (LC 5,000 daN) Tjdpfx Aoup U Hzjcnjb - 2 pairs of folding lashing rings on the outside (LC 10,000 daN) - 2 pairs of lashing rings in the dipper stick recess (LC 5,000 daN) - Cut-outs in the outer frame of the load area for securing straps (LC 2,000 daN) - Incl. three-part removable galvanized covers over the wheel recesses – max. point load 3.5 t / pc. Two-piece Steel Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood surfacing - Ramp with hydraulically folding ramp sections, hydraulic lifting gear, and hydraulically adjustable Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 steering trailing axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tool kit - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 141 Accessories Included: - Mounts for warning signs left and right at the gooseneck and at the rear, each with socket - One spare wheel - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings at the galvanized front connector strip - 4 wheel chocks - Galvanized, extendable outriggers approx. 230 mm per side - Galvanized folding supports beneath the loading area bevel - Rear trailer bracket for rotating beacon - Cover plates for bridging the gap between ramps and load area - White reflective tape to EU regulations, sides and on extensions; rear in red - Electro-hydraulic unit installed at the rear beneath the loading area - Ramp control valves mounted on right trailer side - European reflective panels (red-yellow) on rear of trailer - Four extendable warning boards, approx. 423 x 423 mm, with position light - Bracket for rotating beacon on warning boards - Removable ALU side boards and rear board on gooseneck approx. 2,440 x 400 mm - Rear galvanized removable stakes (structure length approx. 2,560 mm) - 2 pairs of WADER container pockets in loading area for 20ft or 30ft container - 3 pairs of socket pockets for stakes 100 x 50 mm in outer frame of loading area - Removable, galvanized intermediate table with 1 pair of WADER container pockets - Square climbing strips 20 x 20 mm spaced every 200 mm on outer frame at loading bevelling - Painted sand layer on chequer plates of the gooseneck and loading area for anti-slip protection - 80 km/h speed stickers rear and both sides - Load manometer for axle load measurement, including load chart.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 12.800 kg, največja dovoljena obremenitev: 44.200 kg, skupna masa: 57.000 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Rešitev transporta po meri Konfigurirajte svoje vozilo Fliegl v skladu z vašimi zahtevami. Prikazano vozilo je primer. Proizvodnja in oprema sta prilagojeni posameznim željam kupca. Podvozje: polpriklopnik z nizkim ležiščem Jeklena varjena konstrukcija, sedlasta plošča z zamenljivim drugim zatičem kralja in dvema pozicijama za drugi zatič 24 t dvostopenjski podporni vitel, enostransko upravljanje Zložljiva zadnja opora 2 zagozdi za podvozje s pritrdilcem Stranska zaščita proti naletu iz aluminija 1 plastična orodjarna s polico, b =620/h =360/t =440 mm, z možnostjo zaklepanja s ključavnico Razširitve izvlečne do 3.000 mm Predal za lesene deske na labodjem vratu, spredaj prečno Lesene deske 70 mm za razširitev na 3.000 mm Teleskopski sistem Centralni cevni okvir iz natančno zvarjenih, teleskopsko prekrivajočih se delov okvirja izvlečno do maks. 6.000 mm in z možnostjo fiksacije na vsakih 1.000 mm Zavarovanje s pomočjo mehanskega zatičnega sistema s pomično mizo Pritrdilne ušice za nizkopodna vozila 2 para obročastih priveznih ušes, po 5 t, spredaj na labodjem vratu, 11 parov priveznih nastavkov zgoraj in ob strani v zunanjem okviru, vsak po 10 t, 2x na labodjem vratu, 9x na površini nizkega ležišča, prva privezna točka 250 mm od spredaj in zadnja največ 250 mm od zadaj, razdalja med ušesi ne več kot 1.100 mm 8 parov žepov za kolike, vdelanih v zunanji okvir, notranja mera 70 x 40 mm (prilagodljivi za 5 t obročasta ušesa, ni vključeno v dobavo) 3 para zložljivih priveznih ušes, dodatno vgrajenih v območju nizkega ležišča, vsak po 10 t: 1x začetek nizkega ležišča, 1x pred 1. osjo in 1x za 3. osjo Preme in vzmetenje SAF bobnaste zavore Premične/šasija lasersko merjena za zmanjšanje obrabe pnevmatik in porabe goriva Zadnji dve premi vodeni, z avtomatsko blokado vzvratne vožnje prek vzvratnih luči in ročno blokado z gumbom na vozilu Zračno vzmetenje z ventilom za dvig/spust Kolesa in pnevmatike 235/75 R 17,5, znamka Fulda Jeklena platišča v dvojni postavitvi, tovarniško srebrna Zavorni sistem Dvovodni zračni zavorni sistem Vzmetna parkirna zavora Sistem stabilnosti vozila Prikaz nosilnosti osi preko EBS-Canbus signala, za prikaz na zaslonu v kabini tovornjaka, tovornjak mora biti temu prilagojen, brez LKW instalacije (brez overjene tehtnice) 2 proti zamenjavi odporna priključna spoja spredaj, brez povezovalnih cevi EBS, elektronski zavorni sistem z EBS vtičnico spredaj, brez povezovalnega kabla Opozorilo: Priklopno vozilo lahko vlečejo le vlečna vozila, ki zagotavljajo delovanje ABS! Elektrika 24 V, večkomorni žarometi, stransko rumena LED osvetlitev Tjdpfsi Ri Hnox Acnsb 2 bela pozicijska žarometa spredaj 2 bela/rdeča označevalna žarometa zadaj 1 LED rotacijska luč z nosilcem, upravljana prek pozicijskih luči (luč snemljiva) 2 para opozorilnih plošč, dvojno LED osvetljene in izvlečne do 3.000 mm 2x 7-polni proti zamenjavi odporni vtičnici spredaj, brez povezovalnega kabla Talna obloga Labodji vrat s prevleko iz jekla/protizdrsne pločevine Skladiščni prostor v naklonu labodjega vratu nato z 70 mm mehkim lesenim podom, v območju kolesnih vodil jekleni/protizdrsni sloj Zadnji naklon s 70 mm mehkim lesenim podom Stranske stene 25 mm aluminijasti votli profil, 400 mm visoke, spredaj in ob strani na labodjem vratu, snemljive Nakladalne rampe Jeklene rampe, dolžine 2.800 mm, širine 750 mm, bočno pomične prevlečene z lesom Hidravlično prek priklopa na pomožni pogon vlačilca z dušilnikom Hidravlični priključek s SVK spojko NW 10/3, brez povezovalnih cevi Navodila za upora

Stanje: novo, lastna masa: 10.700 kg, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, barva: sivo-črna, Oprema: ABS, Gooseneck: • Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Extendable loading platform: • Loading platform in extendable design with rear taper approx. 1,000 mm x 8° • Cut-outs in outer frame of loading platform for attaching tensioning straps • Approx. 48 mm thick hardwood flooring; anti-slip checker plate covering above the axles Two-piece steel ramps: • One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering • Ramps with hydraulically foldable ramp sections, hydraulic lift system, and hydraulically adjustable • Maximum load per pair: approx. 40,000 kg Todpfxohlz S Nj Acneb Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reverse lock, activated via reverse gear or manually • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Paintwork: • First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component zinc dust primer • High-quality, single-color top coat in MB 7350 Novagrey applied with two-component paint • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: • Steel construction made of high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system in accordance with EU regulations, 24 Volt lighting • ASPÖCK-UNIBOX on front connection panel with 24N, 24S & 15-pin sockets Accessories included: • One spare wheel with holder • Galvanized steel front wall approx. 400 mm high • Yellow-red air couplings on the galvanized front connection panel • 4 wheel chocks • Rear mounting bracket for beacon light at the end of the semitrailer • Recess at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the loading platform taper • Cover plates to bridge the gap between ramps and loading platform • White reflector tape per EU regulations on sides, extension, and red at rear • Electro-hydraulic unit at rear, under the loading platform • On gooseneck and ramps, left and right, each with a holder for warning signs, including socket • Operating valves for the ramps located on the right side of the trailer • ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) • Four warning panels extendable by approx. 400 mm with a position light • 3 pairs of WADER container pockets in the loading platform for one 20ft, 30ft or 40ft container • 6 pairs of stanchion pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform taper • Painted anti-slip sand layer on checker plates, above king pin and loading platform • Load gauge for axle load measurement, including load diagram • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized and hot-finished with ZINACOR 850 (Zinc 85% - Alu 15%)

Stanje: rabljeno, največja dovoljena obremenitev: 18.200 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2010, dolžina tovornega prostora: 8.170 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.150 mm, prostornina tovornega prostora: 43 m³, Oprema: ABS, * 1988 – identifikacijska številka vozila za telefonske povpraševanja * Tip: AFG 24 * ABS, osi SAF, kolutne zavore, zračna vzmet (dvigovanje in spuščanje), portalna vrata, stranska vrata na desni strani tovornega prostora (trajno privita), 2x luč, pritrdilne letve na bočnih stenah in podu/stropu * Pnevmatike 1. os: 385/65R22,5 (14 / 10 mm) * Pnevmatike 2. os: 385/65R22,5 (8 / 11 mm) * Pnevmatike 3. os: 385/65R22,5 (12 / 11 mm) ----naš e-poštni naslov:     naša storitev za vas: Todox Egnpopfx Acnsb       - ureditev začasnih ali carinskih registrskih tablic       - prevoz / dostava po vsej EU       - carinski postopki za vozila, ki se izvažajo v tretjo državo WhatsApp za angleščino, nemščino, ruščino in druge jezike:

Stanje: rabljeno, prva registracija: 12/2017, skupna masa: 39.000 kg, lastna masa: 6.790 kg, barva: zelen, vrsta prenosa: drugo, emisijski razred: noben, Leto izdelave: 2017, največja dovoljena obremenitev: 32.210 kg, naslednji pregled (TÜV): 03/2026, vzmetenje: zrak, prostornina tovornega prostora: 101 m³, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, velikost pnevmatike: 435/50 R19.5, velikost sprednje pnevmatike: 435/50 R19.5, velikost zadnje pnevmatike: 435/50 R19.5, voznikova kabina: drugo, Oprema: ABS, dodatne luči, elektronski program stabilnosti (ESP), meglenke, osvetlitev, registracija tovornjaka, zavorni sistem na stisnjen zrak, zaščita za glavo, šasija, Schmitz 3-osna MEGA – ponjava s stranskimi zavesami, SCS 24/L - 13,62 * Izvedba POWER CURTAIN * Šasi pocinkano * Stranske letve za pritrditev palet * Drsno pokrivalo Edscha Tjdpfsy Tr Dhsx Acnob * Drsne ponjave na levi/desni strani * Primerno za prevoz s tovornim vlakom * Sistem pritrditve za prevoz s trajektom * Oske Schmitz * Dvigni se/spusti se streha * 1 orodjarna škatla na desni strani * Kolutne zavore * ABS, EBS, ALB, LSV, CDF * Vrata s portalom zadaj * Dodatne stranske opore zadaj * Zračno vzmetenje (dviganje/spuščanje) * Certifikat po EN 12642-XL + Daimler 9.5 * Pnevmatike: 435/50 R19.5 * Notranje mere: D – 13,62 m, Š – 2,48 m, V – 3,00 m * Teže: Dovoljena skupna masa – 39.000 kg, Dovoljena masa na os – 6.790 kg, Neto teža – 32.210 kg * Nemško vozilo z nemško dokumentacijo!! * Dobro stanje – zelo dobre pnevmatike (2 x 70 %, 4 x 80 %)!! * 1. lastnik!! * Datum prve registracije: 20. 12. 2017 * Tehnični pregled veljaven do: 03/2026 * Glavni tehnični pregled veljaven do: 09/2026 * VIN: WSM000003291425 Pridržujemo si pravico do sprememb, napak in vmesne prodaje! Na nekaterih slikah so bila logotipa podjetij odstranjena – prosimo, vprašajte. Delovanje dodatne opreme ni zagotovljeno. Vaš kontakt: Tobias Karcher Tel. + WhatsApp:

Stanje: rabljeno, lastna masa: 11.950 kg, največja dovoljena obremenitev: 37.550 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, prva registracija: 02/2025, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report. Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Two-piece steel ramps: - One pair of galvanized two-piece steel ramps, approx. 3,185 x 1,420 x 1,250 mm, with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system - Maximum load per pair: 30,000 kg Loading platform: - Loading area with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of externally foldable lashing rings - 3 pairs of externally foldable lashing rings - 1 pair of flat lashing rings at the front of the loading area - Approx. 48 mm thick hardwood flooring; tread plate surface above the axles Axles and wheels: - BPW axles and suspension; two axles fixed, one self-steering axle - Air suspension with raise/lower valve - Self-steering axles with electro-magnetic reverse lock, activated via reverse gear or manually - Tyres: 235/75 R17.5 3PMSF Accessories included: - 1 spare wheel with holder - TPMS tyre pressure monitoring system in accordance with ECE R 141 - 2" kingpin - One galvanized steel bulkhead - Yellow-red air couplings at the galvanized front connector rail Todey Drdcepfx Acneb - 4 wheel chocks with holders - Recess at the rear of the gooseneck for ALU access ramps - 3 heights of aluminum planks - Galvanized folding supports under the chamfer of the loading platform - A holder for a revolving beacon at the rear of the trailer - Height-adjustable tarpaulin structure (3,960 mm) - Galvanized front wall with a tensioning mechanism for the sliding curtain - Height adjustment possible by approx. 400 mm - "EDSCHA" branded roof, forward-slidable on aluminum roof beam profiles, bolted to front and rear walls - 3 pairs of sliding stanchions on the loading area - Structure hydraulically extendable at the rear by approx. 750 mm to the left and right - Sliding roof with pivotable portal beam - Sliding curtain with 700 mm length reserve, tension belts spaced approx. 600 mm apart - Height to top edge of structure approx. 3,960 mm - Driving with an open sliding roof is not permitted and will lead to damage of the tarpaulin - Cover plates to bridge the gap between ramps and loading platform - Electro-hydraulic unit at the rear, under the loading platform - At the gooseneck and ramps, left and right respectively, one holder for warning signs including socket - European reflective signs (red-yellow) at the rear of the trailer - 6 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm on the outer frame of the loading area - Lifting axle at the front axle with control via TEBS E depending on current axle load and loading condition - Grating surface in the chamfer of the loading platform C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm on the right in the direction of travel, between the axles - Painted sand layer on tread plates on the gooseneck and loading platform as anti-slip protection - BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 - Four warning boards, extendable by approx. 400 mm, approx. 423 x 423 mm - Axle load gauge including load diagram - HRM (High Resistance Metallisation) metallization of the outer frame - Entire steel structure shot-blasted, then all defined visible surfaces hot-finished in metallisation with ZINACOR 850 (zinc 85% - aluminum 15%)

Stanje: novo, lastna masa: 6.650 kg, največja dovoljena obremenitev: 17.350 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 10.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5 (Doppelbereifung), barva: srebrn, vrsta prenosa: mehanski, poraba goriva (mestna vožnja): 1.090 l/100 km, Unladen weight: 6,650 kg, permissible gross weight: 24,000 kg, tyre size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf suspension, - welded steel construction - bogie with heavy-duty ball bearing turntable - foldable rear support - 1 spare wheel holder for 1 spare wheel, with wheel mounting kit - without spare wheel, - 1 plastic toolbox, with shelf, dimensions 620x360x440 mm (w/h/d), lockable with padlock - extendable outriggers up to 3,000 mm (not at rear bevel) - storage compartment for timber planks underneath the low-bed area - 70 mm timber planks for extension to 3,000 mm - 1 pair of recessed lashing rings at the front in the gooseneck, each rated at 5 t - 7 pairs of lashing mushrooms recessed top and side in the outer frame, each rated at 10 t (1 x front in gooseneck, 6 x in low-bed area) - 5 pairs of stake pockets recessed in the outer frame, internal 70x40 mm - 2 additional pairs of folding lashing rings, each 10 t, 1x front in gooseneck, 1x behind 3rd axle - towing bar with 40 mm towing eye and 8° inclined towing eye - SAF drum brake axles - parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalisation (rocker equalisation) - 235/75 R17.5 - twin steel rims, factory silver - dual-circuit compressed air brake system - spring-loaded parking brake ABS and ALB, with socket at front, including connecting cable - 24 volt, multi-chamber lights, side yellow LED lighting - 2 x 7-pin non-interchangeable connectors at front, with connecting cable - 1 LED beacon with holder, operated via parking light (removable lamp) - 2 pairs of double LED warning panels, extendable up to 3,000 mm - gooseneck with steel/chequer plate covering - storage box recessed in the transition slope to gooseneck - followed by 70 mm softwood floor, steel/chequer plate covering in wheel well area - rear slope with 70 mm softwood floor - low-bed area incl. rear slope 6,500 mm - steel ramps 2,800 mm long, 750 mm wide, laterally adjustable, with timber covering - additional ramp safety device Todpfxeyxh Rzs Acnjb

Stanje: rabljeno, prevoženi kilometri: 5.050 km, moč: 110 kW (149,56 KM), prva registracija: 03/2025, vrsta goriva: dizel, skupna masa: 3.500 kg, gorivo: dizel, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo, število sedežev: 3, Oprema: airbag, drsna vrata, filter saj, greljenje sedeža, klimatska naprava, navigacijski sistem, parkirni senzorji, računalnik na krovu, servovolan, tempomat, E07 Pomoč pri speljevanju v klanec, JA7 Sistem za nadzor mrtvega kota, EY5 Mercedes-Benzov sistem za klic v sili, F1K Obešala za oblačila v kabini voznika, EY6 Upravljanje v primeru okvare, G43 9G-TRONIC, AI1 Koda za nadzor zadnje osi, prečni zobnik 215, L65 Stropna luč/luči v prostoru za voznikom/sopotnikom s senzorjem vrat, RS3 Jeklena platišča 6‚5 J x 16, JK5 Kombiniran instrument z barvnim zaslonom, Z1N Homologacija N1, LG7 LED žarometi s povečano zmogljivostjo, SE5 Podpora ledvenega dela na voznikovem sedežu, XO9 Mercedes-Benz MobiloVan s sistemoma DSB in GgD, CN2 Okvir hladilnika v barvi vozila, XG7 brez možnosti spremembe nosilnosti do 3.500 kg, IR4 Medosna razdalja 3665 mm, HH2 Dodatno ogrevanje z vročim zrakom, električno, T75 Ročaji za vstop za voznika in sopotnika, T77 Ročaj za vstop na drsna vrata tovornega prostora na pregradi, W54 Zadnja vrata, dvojična, odpiranje do bočne stene, E1E Dodatna digitalna funkcija: navigacija s trdim diskom, HH9 Polavtomatsko reguliran sistem za nadzor temperature TEMPMATIC, E1D Digitalni radio (DAB), Y10 Komplet prve pomoči, MJ8 Funkcija ECO Start-Stop, 805 AEJ X4/1, ES0 Pomoč pri vžigu - kontakt, D03 Visoka streha, ES5 Paket za polnjenje na armaturni plošči, E1U Vtičnica USB 5 V, MS1 TEMPOMAT, FM3 SISTEM ZA ČIŠČENJE ŠIPE Z BRIZGALCI, Q22 Priklopna prikolica z nastavljivo prikolico, T85 Ročaj za vstop na zadnjem stebru na levi strani, HI1 Klimatska cona 1 (hladno/udobno), T86 Ročaj za vstop na zadnjem stebru na desni strani, RM0 Vsezimske pnevmatike, V43 Lesena talna obloga, V42 Pritrdilne letve na bočni steni, pritrjene na varnostni pas, XY5 Letnik modela 5, C6L Multifunkcijski volan, LA2 Sistem za pomoč pri vožnji s prižganimi lučmi, ZM0 Kombi, LA1 Sistem za pomoč pri vožnji z dolgimi lučmi, IT4 Osebno vozilo 3,5 tone, J55 Sistem opozarjanja o neuporabi varnostnega pasu za sopotnikov sedež, H16 Ogrevani sedež za voznika, J58 Sistem opozarjanja o neuporabi varnostnega pasu za voznikov sedež, H15 Ogrevani sedež za sopotnika, MT5 EMISIJSKI RAZRED EURO 6e RDE5 N1, W73 Stopnica za zadnja vrata, ED4 Gel akumulator 12 V 92 Ah, FF5 Odlagalno mesto nad vetrobranskim steklom, J., Dosegljivi smo po telefonu od ponedeljka do petka do 20. ure in ob sobotah do 16. ure!! Dodatno:!! Možnost lizinga/financiranja in odkupa!! !! !! Todpfxozk Hquo Acnob -Pridržujemo si pravico do spremembe cen in napak!! -Vse informacije brez jamstva ... več na naši spletni strani

Stanje: rabljeno, lastna masa: 5.300 kg, največja dovoljena obremenitev: 12.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2010, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.900 mm, prostornina tovornega prostora: 52 m³, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5 ---/141J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 ---/141J, velikost zadnje pnevmatike: 235/75R17,5 ---/141J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Lashing eyes, -- Typographical errors, mistakes and changes excepted, sample images --, More data at: !, More details: ! Tjdpfezv Nbyex Acnsb

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 8.900 kg, največja dovoljena obremenitev: 26.100 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.200 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 13.300 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Customised Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored individually to customer specifications. Chassis Low-bed Semi-Trailer Steel welded construction, fifth wheel plate with interchangeable 2-inch kingpin and two kingpin positions, 24 t two-speed landing gear, single-sided operation, with straight lower section, without load compensation Rear support foldable 2 wheel chocks with holders Aluminium side underrun protection Full-width rear mudflap Mudguards in front of the 1st axle and behind each axle with antispray, compliant with EC regulations Extendable widenings to 3,000 mm (not in rear slope) Storage compartment for timber planks in the centre of the loading area Tjdoi Ri E Rspfx Acnsb 70 mm timber planks for extension to 3,000 mm Lashing Points Low-bed 2 pairs of ring lashing eyes each rated for 5 t at the front on the gooseneck 11 pairs of lashing mushrooms embedded on the top and side of the outer frame, each rated for 10 t 2 x on gooseneck 9 x distributed on the low-bed deck First lashing point 250 mm from the front and last one max. 250 mm from the rear, distance between lashing points not greater than 1,100 mm 8 pairs of stake pockets embedded in the outer frame, inner dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes) Axles + Suspension SAF drum brake axles Air suspension Wheels and Tyres 235 / 75 R 17.5 Steel rims, twin arrangement, factory silver Braking System 2-line compressed-air braking system Coloured hose arrangement for easy servicing Spring-loaded parking brake EBS, Electronic Braking System with EBS socket at the front, without connection cable 2 anti-mistake couplings at the front, without connection line With lift & lower valve Axle load detection via EBS-Canbus signal, for display in the driver’s cab Vehicle stability control system Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin anti-mistake sockets at the front, without connecting cable 1 LED beacon with holder 2 pairs of double warning boards, LED lit and extendable to 3,000 mm Floor Gooseneck with steel plate covering Storage box fitted into the ramp to gooseneck Then 70 mm softwood flooring, in wheel arch area with steel/chequer plate covering Rear slope with 70 mm softwood flooring Low-bed area including rear slope: 9,200 mm Loading Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber planked Hydraulic operation via tractor auxiliary drive with throttle, operation on left side in driving direction Hydraulic connection with SVK coupling NW 10/3, without connection hoses Customised Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored individually to customer specifications.

Stanje: novo, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5 3PMSF, barva: siv, Oprema: ABS, Swan neck: - Swan neck with front corners beveled at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Extendable load area: - Extendable load area with rear chamfer approx. 1,000 mm x 8° - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the load area (LC 10,000 daN) - Cut-outs in the external frame of the load area for attaching lashing straps (LC 2,000 daN) - Approx. 48 mm hardwood flooring, over the axles with checker plate covering Axles and Tires: - BPW axles and suspension, 2 fixed axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated by reverse gear or manually Tedpfxouqlmne Acneb - Air suspension with lifting and lowering valve - Axle tools - 235/75 R 17.5 tires, 3PMSF Braking system: - WABCO braking system as per EU regulations with EBS-E (2S2M) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Accessories included: - One spare wheel with holder in front of the front wall - 2'' king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection rail - 4 wheel chocks with holder at the front wall - Rear light bracket at the rear of the trailer - Mounting points at the rear area of the swan neck for ALU loading ramps - Galvanized folding supports under the chamfer of the load area - Cover plates to bridge the gap between ramps and load area - White reflective tape according to EU standards on the sides, red at the extension and rear - Electro-hydraulic unit at the rear, under the load area - Bracket for warning panels left and right on the swan neck and ramps, including power socket - Ramp control valves mounted on the right-hand side of the trailer - One mud flap at the rear of the trailer - Manual and documentation on USB stick - On the swan neck aluminum side walls and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable (body length approx. 2,560 mm) - Four warning panels extendable by approx. 400 mm, size approx. 423 x 423 mm, with position light - 3 pairs of WADER container pockets in the load area for a 20ft, 30ft, or 40ft container - 6 pairs of stake pockets 100x50 mm in the external frame of the load area - Galvanized extensions, extendable by approx. 230 mm per side - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the chamfered area of the load area - Anti-slip sand layer painted on the checker plate above the king pin and load area - Mounting for beacon on the warning panels - European reflective plates (red-yellow) at the rear of the trailer - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads, including load chart - HRM metallization (High Resistance Metallisation) of the external frame - Complete steel construction shot-blasted, then the defined visible surfaces finished hot-metallized with ZINACOR 850 (zinc 85% - aluminum 15%)

Stanje: rabljeno, največja dovoljena obremenitev: 29.000 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2008, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 500 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2008, Oprema: ABS, * Proizvajalec: Wilken * Trovretena os, zadnja os * Dvignjena os * Nosilec za viličar * 500 mm aluminijaste stranske ograje * Osnova: SAF Tedpfx Acjwaph Djnob * V celoti vzmetena na zračnih blazinah * Kolutne zavore Cena je navedena za vozilo v trenutnem stanju.

Stanje: rabljeno, največja dovoljena obremenitev: 35.480 kg, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2026, naslednji pregled (TÜV): 05/2027, Oprema: ABS, Izpis opreme Podvozje: Varjena konstrukcija iz visokokakovostnih jeklenih profilov z votlinami, zasnovana za visoke točkovne obremenitve. Sprednja zaščita pred podvozjem, širina približno 700 mm, zunanji okvir kot profil UNP, drsna plošča približno 8 mm, višina vratu spredaj približno 130 mm. Priključna naprava: 2-palčni kraljevi zatič. Zaščita pred podvozjem: vijična izvedba, v skladu z ES. Bočna zaščita pred podvozjem: v skladu z ES, iz aluminijastih profilov, eloksirana. Nosilci petega kolesa: 2 x 12 t nosilcev petega kolesa z izravnalno nogo in enostranskim upravljanjem na desni strani. Osi: 3 x 9 t zračne vzmetne osne enote, diskovne zavore 22,5?. Skupna višina približno 180 mm, naprava za dvig in spuščanje prek rotacijskega drsnega ventila. Zavorna sistema: dvo-vodna zavora na stisnjen zrak v skladu z ES, z EBS in RSS, avtomatska regulacija glede na obremenitev, cilindri vzmetnega akumulatorja kot parkirna zavora, zavarovani priključni glav in trdno nameščeni na čelnem nosilcu, brez povezovalnega kabla do vlečnega vozila. Pnevmatike: 6-krat, 385/55 R22,5 160J na jeklenem platišču 11,75 X 22,5 ET 120, proizvajalec po naši izbiri. Nadzor tlaka v pnevmatikah (TPMS) prek CAN-bus sistema EBS. Blatniki: v skladu z ES. Nosilec rezervnega kolesa: brez. Zavarovanje tovor: - 9 parov zložljivih pritrdilnih obročev, enakomerno razporejenih, vlečna sila približno 5,0 t. - 9 parov zložljivih pritrdilnih obročev, enakomerno razporejenih, vlečna sila približno 2,0 t. Tsdpfx Acszrq U Henob - Na zunanjem okviru vsakih približno 400-600 mm luknje za pritrditev zategovalnih trakov. Čelna stena: ojačana jeklena konstrukcija, fiksna, približno 1.400 mm visoka. Notranjost obložena s približno 9 mm sitotiskano ploščo (približno 1.250 mm visoka). Pod: približno 28 mm Z-trd leseni pod, vgrajen v zunanji okvir z pocinkanimi omega-jeklenimi profili. Osvetlitev: v skladu z ES, 24 Volt, z večprekatnimi svetili, LED stranskimi pozicijskimi lučmi, LED pozicijskimi lučmi bele barve spredaj, LED gabaritnimi lučmi zadaj, lučmi za oznako registrske tablice. Luči za ohranjanje smeri LED. 1x15- in 2x7-polni priključki na čelnem nosilcu. Oprema: - 2 klini z nosilcem. - Opozorilni znaki ECE 70. - Nosilec za okroglo opozorilno luč, vključno z okroglo opozorilno lučjo. - 2 gumijasta odbijača na zadnji strani. - Stopnišče na zadnji desni strani, zložljivo in raztegljivo (brez podesta). - 1 odprta škatla iz luknjane pločevine, nameščena prečno v smeri vožnje, približno 600 x 450 x 2.430 mm, pocinkana, za osmi. Barvanje: - Čelna stena: RAL 3002, karminsko rdeča. - Podvozje: vročo pocinkano. - Zunanji okvir: vročo pocinkano + RAL 3002, karminsko rdeča. - Osrednja palica: RAL 3002, karminsko rdeča. - Nosilec petega kolesa (SSV): aluminij, eloksirano. - Zaščita pred podvozjem: bela (RAL 9016, prometno bela). - Dodatni deli: pocinkani/KTL črni. - Platišča: srebrna. Konturna oznaka: popolna, rumena. Vključno z dodatno opremo. Prva os je dvigljiva, z popolnoma avtomatskim dvigom, ki se prilagaja obremenitvi. 10 parov žepov za palice v zunanjem okviru, enakomerno razporejenih. 4 vrste žepov za palice prečno na površino nakladanja. 20 palic iz pocinkane cevi 80/50, skupna dolžina približno 1.200 mm. Na notranji strani čelne stene predal za 20 palic. 5 x 25 mm stranske plošče in zadnja plošča iz eloksiranih aluminijastih profilov, zložljive in odstranljive, odstranljive Kinnegrip palice. Predal za stranske plošče in palice: pod podvozjem na levi in desni strani, vodila za stranske plošče

Stanje: rabljeno, največja dovoljena obremenitev: 28.800 kg, skupna masa: 33.400 kg, konfiguracija osi: 3 osi, prva registracija: 08/2019, naslednji pregled (TÜV): 09/2028, Leto izdelave: 2019, Interna številka vozila: MK300002 Interna številka vozila: G300168 Takoj na voljo na našem dvorišču v Kaufungen Več informacij na: * Golec Nutzfahrzeuge GmbH (nemško, angleško, bolgarsko, rusko) Tjdex Txu Hopfx Acneb * Viktoria Sologubova (poljsko, rusko, ukrajinsko, angleško) Primer financiranja: * Interna številka: MK300002 * Nakupna cena: 44.900,00 € * Polog: 10% * Obdobje odplačevanja: 60 mesecev * Mesečni obrok: 703,24 € * Preostala vrednost: 8.980,00 € Če vam ponudba ustreza ali jo želite prilagoditi vašim potrebam, nas kontaktirajte (g. Enchev). Veselimo se vašega klica. Pridržujemo si pravico do napak. Z veseljem odkupimo vaše rabljeno vozilo v račun. Financiranje je mogoče neposredno pri nas v podjetju. GOLEC NUTZFAHRZEUGE GMBH Govorimo: nemško, angleško, špansko, poljsko, ukrajinsko, rusko, bolgarsko.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902029406, lastna masa: 5.800 kg, največja dovoljena obremenitev: 29.200 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2021, naslednji pregled (TÜV): 06/2027, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.790 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", barva: srebrn, The photos are archive images; the vehicle may still be in use! Chassis: Semi-Trailer for Haulage Todpfxjwhp A Ds Acneb Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil well approx. 8,040 mm long, 6 coil supports (coil pockets internal dimensions 82 x 52 mm), coil well cover with multiplex boards and steel crossmembers, 2 slit coil covers for the coil well, each approx. 293 mm wide, unladen weight approx. 13 kg per cover, outer frame slightly sloped with "Load-Lock profile" for attaching tie-down straps. Note: To attach straps in combination with side walls, the side walls must be opened! 9 pairs of recessed lashing rings, each rated at 5 tons, in the area of the coil well. 24-ton two-speed landing gear, single side operation, with straight lower part, without compensating slide. Note: Free landing gear foot clearance, or free rear swing radius approx. 1,930 mm, without supports. Retractable ladder at the rear, door retainers on sides, 2 wheel chocks with holder, aluminium side underrun guard, holder mounted transversely and on the chassis main beam for supporting aluminium planks, rear underrun protection in aluminium, half-shell fenders with anti-spray flaps compliant with EU regulations, rear impact protection, 1 plastic toolbox, 2 pairs of stanchion pockets integrated in the outer frame, approx. 72 x 42 mm internal dimensions in positions 1 and 2 as per old Fliegl stanchion data sheet, as with AU 19219. 2 stanchion pockets centrally embedded in the floor, approx. 72 x 42 mm internal dimensions on positions 1 and 2 as per old Fliegl stanchion data sheet, as with AU 192198. Note: Stanchion pockets / plug-in stanchions are not designed for stand-alone load securing of long materials, pipes, etc. without lashing. Axles & Suspension SAF disc brake axles with 430 mm disc diameter, "axle/chassis laser-measured" for reduced tyre wear and fuel consumption. Axle spacing offset 1410/1310 mm (combined transport), up to 44-ton total combination weight. Air suspension, without lift axle. The photos are archive images; the vehicle may still be in use!

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 06/2018, naslednji pregled (TÜV): 11/2026, Oprema: ABS, SCHMITZ CARGOBULL SCB?S3T, prikolica s platneno nadgradnjo – *pomična platnena nadgradnja na desni strani* Oprema: zračna vzmetitev Varnost: ABS * EBS * kolutna zavora Vse navedene informacije so brez garancije, pridržujemo si pravico do sprememb in morebitnih napak. Tedpfx Acszvpr Senjb

Stanje: novo, lastna masa: 7.900 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, obratovalna teža: 7.900 kg, Oprema: ABS, Swan Neck: - Swan neck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood decking Loading Area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Recess in the chamfer and encroaching into the loading area for receiving the excavator bucket stick approx. 2,900 x 750 x 210/290 mm - Cut-outs in the external frame of the loading area for attaching tension straps - Hardwood decking approx. 48 mm thick, over the axles with tread plate covering Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Tjdpfxjunraps Acneb Axles and Tyres: - BPW axles and suspension, 2 axles rigid, 1 axle self-steering t- Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raising and lowering valve - TPMS tyre pressure monitoring system compliant with ECE R 141 - Tyres 235/75 R 17.5 Paintwork: - Complete steel structure blasted automatically by wheel blast machine after welding - Second blasting with corundum for optimal adherence of the coating system - Final coating: two layers of 2K top coat, solid colour in RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and coated in RAL 9010 (Pure White) - Cavity sealing with special wax Electrical System: - Electrical system according to EU standards, 24 volt ASPÖCK-NORDIK (ASS3) lighting - ASPÖCK-UNIBOX at front connection rail with sockets 2x 7-pin & 1x 15-pin Included Accessories: - Multiple lashing positions - 2" king pin - One galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on galvanized front connection rail - 4 wheel chocks with holders mounted on the front wall - Receiver at rear of swan neck for ALU loading ramps - Galvanised folding supports beneath rear chamfer of loading area - Bracket for beacon at rear of trailer - Galvanised extendable outriggers, extendable by approx. 230 mm per side - White reflector tape to EU spec at sides and rear, red at rear - Brackets for warning signs on left and right of swan neck and rear panel, including socket - ALU side boards and rear board on swan neck, removable, approx. 2,440 x 400 mm - Rear galvanised stake pockets are removable - 2 pairs WADER container pockets in loading area for 20ft container - 6 pairs stake pockets for removable stakes 100 x 50 mm in the outer frame - Adjustable hanging rail for ALU access ramps at the rear of the vehicle - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the loading area chamfer - Sand-finish anti-slip coating painted onto the tread plate on swan neck and loading area - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm with position light - Bracket for beacon fitted to warning boards - 80 km/h speed sticker rear and on both sides - European reflective signs (Red-Yellow) at the rear of trailer - Manual and operating instructions on USB stick - HRM metallisation (High Resistance Metallisation) of the external frame - Complete steel structure shot-blasted, then specified visible surfaces metallised with ZINACOR 850 (Zinc 85% - Alu 15%) hot-finished

Stanje: rabljeno, prva registracija: 04/2017, velikost pnevmatike: 385/65 R22,5, Fliegel, prikolica z 3 osmi za prevoz zaves, z bočno drsno zaveso in drsnim pokrovom. Pnevmatike: 385/65 R 22,5. Prodaja izključno podjetjem, brez kakršnih koli garancij. Pridržana možnost spremembe in napake. Tsdpfx Acsztcznsnob

Stanje: novo, lastna masa: 10.350 kg, največja dovoljena obremenitev: 39.150 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Loading area: - Telescopic loading area with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom - Between the 1st and 2nd axle, 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - 3-piece detachable galvanized covers over the wheel recesses (W 670 mm) – max. point load 5 t / pc. - Recess in the chamfer and protruding into the loading area for the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of foldable external lashing rings (LC 5,000 daN) - 2 pairs of foldable external lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) One-piece aluminum ramps: - 1 pair one-piece ALU ramps, approx. 2,500 x 600 mm - Ramp with spring lifting mechanism and manually adjustable - Maximum load per pair: 24,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 trailing steering axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tool - Tyres 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R 141 Accessories included: - 1 spare wheel with holder in front of the bulkhead - 2" kingpin - 1 galvanized steel front wall approx. 400 mm high - At the galvanized coupling rail at the front, yellow-red air couplings - 4 wheel chocks with holder at the bulkhead - Mounting point at the rear of the gooseneck for ALU ramps - Galvanized extensions, extendable by approx. 230 mm per side - Galvanized folding supports under the chamfer of the loading area - 1 holder for a rotating beacon at the rear of the trailer - White reflective tape laterally, at the extension, and red at the rear, per EU regulations - At the gooseneck and rear panel, left and right, each with a holder for warning signs including socket - On the gooseneck, plug-in ALU sideboards and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable (body length approx. 2,560 mm) Tedpfx Aeiu Er Aocnob - 2 pairs of WADER container pockets in the loading area for a 20ft or 30ft container - 3 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - 1 removable galvanized intermediate table with 1 pair of WADER container pockets - 20 x 20 mm square climbing strips every 200 mm on the outer frame in the chamfer of the loading area - Anti-slip sand coating on the checker plates on the gooseneck and the loading area - Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm, with position light - Holder for rotating beacon on the warning signs - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then all defined visible surfaces metalized and hot-finished with ZINACOR 850 (Zinc 85% – Alu 15%)

Stanje: novo, konfiguracija osi: 3 osi, prostornina tovornega prostora: 24 m³, Oprema: ABS, Schmitz 3-osni kiper 24 m³ z dvižno osjo, pocinkano, z LED lučmi, NOV, za najem. Na preprost pogled: · Prva registracija: Novo vozilo · Letnik proizvodnje: 2026 · Barva: Siva · Barva platnene nadstreška: Siva · Lastna teža: 6.115 kg · Pnevmatike: 385/65 R 22,5 (znamka: Pirelli) · Opomba: Na voljo takoj. Posebna oprema: · MODEL SKI24 SL 7,2, triosna prikolica, jeklena konstrukcija, lahka različica, šasi z nakladalnim koritom, nadgradnja (jeklena polkrožna korita 7,2 / 1460 mm višina stranske stene) · Popolnoma pocinkano podvozje · 24 m³ · LED luči · Dvižna os · SR – dno korita 7,2 v 5 mm debelini · Hidravlični cilindri · Delovna ploščad z dostopom z leve strani · Samodejno spuščanje med nakladanjem · Kolesne zavore 430 mm · Nosilec za lestev + lestev · Podporni vijačni mehanizem proizvajalca JOST (manj zahteven za vzdrževanje) · 1x 15-polni + 2x 7-polni električni priključek · Aluminijasta zračna posoda · Orodjarna · Označitev obrisa · Podporni vijačni mehanizem Jost · Zaščita podvozja, zložljiva · 1 orodjarna · 2 kos. LED – povratne luči, ločeno. Serijska oprema: · 2 klini za podstavljanje s nosilcem · ABS Tedpfx Acozfu Siensb · EBS · Zračna vzmetitev · Mehanizem za dvigovanje in spuščanje z avtomatsko funkcijo ponastavitve · Prikolna kljuka z zapornim vijakom na levi strani v smeri vožnje Pridržujemo si pravico do sprememb zaradi napak, tiskarskih napak in vmesne prodaje. Prodajalec si pridržuje pravico do prekinitve prodaje. _____ Notranja številka za povpraševanja: TR261 _____ STARENT Truck & Trailer GmbH Bruck 49, A - 4722 Peuerbach Kontaktne osebe za prodajo: G. inž. Wimmer Christoph (nemščina, angleščina, češčina, poljščina, italijanščina) p: tudi WhatsApp t: @: G. Mehmet Terzi (nemščina, turščina, angleščina, ruščina, ukrajinščina, boščina, srbščina) p: / tudi WhatsApp t: -104 @: G. Elias Höfler (nemščina, angleščina, bolgarščina, boščina, srbščina) p: / tudi WhatsApp t: -123 @: Govorimo 13 jezikov. Zagotovo tudi vaš. Pišite nam! Spletna stran: / Facebook: / Instagram: / Starent Truck & Trailer GmbH odkupuje vaša gospodarska vozila, kot so vlečne enote, prikolice, tovornjaki in kombiji. Michael Doblhofer (nemščina, angleščina) p: tudi WhatsApp t: -102 @: Bastian Wagner (nemščina, angleščina) p: WhatsApp t: -103 @:

Stanje: rabljeno, lastna masa: 7.640 kg, največja dovoljena obremenitev: 28.360 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2020, naslednji pregled (TÜV): 07/2026, dolžina tovornega prostora: 14.900 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 2.500 mm, skupna dolžina: 15.180 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, Leto izdelave: 2020, Oprema: ABS, Proizvajalec: WIESE Tip: 3-osni prikolica s fiksno nadgradnjo Letnik: 2020 Dolžina: približno 15,18 m (povečana dolžina/velik previs) Notranjost: sistem vodil za premikanje tovorov Notranje mere: 14,90 x 2,45 x 2,50 (brez vodila je višina 2,77 m) Tehnične lastnosti: pogon SEW Osnovi SAF Stanje: dobro ?feature=share Varnost: diskovna zavora Drugo: papirnate vodila v tleh Tsdszklvvspfx Acneb * Centralno mazanje Razno: rabljeno vozilo

Stanje: novo, dolžina tovornega prostora: 7.410 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.770 mm, barva: siv, Leto izdelave: 2026, = Dodatne možnosti in dodatna oprema = - Metalik barva = Opombe = Poškodbe: nobene = Dodatne informacije = Tsdpfx Acjzvf Upenob Letnik proizvodnje: 2026 Lastna teža: 6.100 kg Nosilnost: 29.900 kg Največja dovoljena masa: 36.000 kg Poškodbe: nobene