Müller-Mitteltal T 40, Verbr. Auf 3M, Hydr. Rampen nakup rabljenega (61.454)

Stanje: novo, največja dovoljena obremenitev: 10.360 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 14.4: ----Braking System: * Electronic Braking System (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Towing Eye: * Drawbar height-adjustable by 300 mm * 40 mm flange towing eye ----Electrics / Lighting: * TPMS (tire pressure monitoring system with indicator function in the truck via EBS signal—no installation required on the truck side) * LED lighting system * 15-pin electrical connector ----General Accessories: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox mounted front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood floorboards * Preparation for subsequent installation of 20" container locks at front and rear * Bolted, smooth sheet metal front wall * Side walls made of trapezoidal-profiled steel, foldable with drop-side spring assist * Hot-dip galvanized bolt-on rear stanchions ----Load Securing: * Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing points every 480 mm * Option for 3 t folding lashing brackets every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner Lhsdjndpn Sspfx Ag Ejk * Various holes in front and end crossmembers for 1.2 t securing points ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles, stored in a compartment underneath the loading area in the chassis, accessible from the rear ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Entire vehicle hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex works Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.850 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem compensating unit ----Drawbar / Flange Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flange eye ----General Fittings: * Jost mechanical landing gear at front Lsdpfxjl Thyxj Ag Eehk * Rear: 2 mechanical, hot-dip galvanized drop-down support legs * Plastic toolbox approx. 750 x 350 x 300 mm, fitted on right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS tire pressure monitoring system ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking fixtures, plus 2 at the front wall * Steel pallet, 3-way tipping body (continuous sidewalls – without center stanchions – foldable with drop side spring assistance) * Rear stanchions bolted * Combination steel double rear doors, asymmetrically split, can be swung open and locked at 270°, not foldable – with additional pendulum frame for automatic tailgate opening during tipping operation; locking via galvanized swing bolt locking and central locking system * Deactivation function for automatic rear wall opening when tipping backwards with open door * 4 mm steel floor plate * Rear ramp carrier rail for drive-on ramps ----Load Securing: * 1 x 5 t lashing point in each corner * 4 x 3 t recessed lashing rings per side, fitted in the outer frame ----Ramps: * 1 pair of aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for vehicles on rubber tires & tracks * Lockable storage compartment for ramps under the loading platform, integrated into the chassis ----Paint Finish: * Drawbar, front wall, tipping platform, rear stanchions, underrun protection, and mechanical support legs hot-dip galvanized * Sidewalls and tailgate painted RAL 9010 pure white * Sidewall painting in any RAL color available at extra charge * Axles, springs, flange eye, air tank, and landing gear painted in a black tone ----Information: * Body reinforced with load securing certificate according to EN 12642 XL * New vehicle without initial registration, with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available ex-works Egestorf on A7

Stanje: novo, največja dovoljena obremenitev: 8.850 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem load equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, on the right-hand side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS tire pressure monitoring system ----Tipper Body: * Net hooks at sides and rear in the central locking compartments, as well as 2 units on the front wall Lhodpfx Ajl Thymjg Eek * Steel palletized 3-way tipper body (continuous side walls—without central stanchions—foldable with board spring-lifter) * Rear stanchions bolted * Combination steel double-wing rear doors, asymmetrically divided, can be opened and locked at 270°, not foldable—with additional swinging frame for automatic rear tailgate opening during tipping process; locking via galvanized locking rods and central locking * Deactivation function for automatic rear tailgate operation when tipping backwards with open wing door * 4 mm steel chequer plate floor * Rear mounting rail for loading ramps ----Load Securing: * One 5 t lashing ring per corner * Four 3 t lashing rings each side, recessed into the outer frame ----Ramps: * 1 pair aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment beneath the loading area, integrated into the chassis ----Paintwork: * Drawbar, front wall, tipper body, rear stanchions, underrun protection, and mechanical supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Side wall painting in other RAL color shades available for an additional charge * Axles, springs, flange eye, air tanks, and landing gear painted in black ----Information: * Reinforced body with cargo securing certificate according to EN 12642 XL * New vehicle, without initial registration, with manufacturer’s warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex works Egestorf on the A7 Motorway

Stanje: novo, največja dovoljena obremenitev: 8.750 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 1.000 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, * Müller?Mitteltal KA-TA-R 11,9, tandem prikolica s platformo, tristranska prikolica s samonakladalnikom in podaljšanimi stranskimi ograjami + aluminijaste rampe * Številka za povpraševanje 31943, na voljo v začetku septembra 2026 * Arhivske fotografije * NOVO VOZILO v barvi RAL 9016, prometna bela * 5 m x 2,42 m x 0,5 m * + 0,5 m jeklene podaljške, 3 strani, nihajna izvedba, zložljive in odstranljive, barvane, z vzmetnim dvigalom in centralnim zaklepanjem (zaklep pocinkan) * Dno prikolice s samonakladalnikom, pocinkano * Stopnice z dvema stopnicama pred čelno steno (pocinkane) * Zaklenjen predal pod nakladalno ploščadjo za rampo * Jeklene vrvice za zadnjo steno * Aluminijaste rampe za nakladanje, 8 t, par, dolžina 3,57 m * 2 LED-luči za vzvratno vožnjo na zadnji strani Lhjdpfxozqh Axj Ag Eek * Podvozje, vroče pocinkano * 4 UVV pritrdilne točke LC 5000 daN, spredaj in zadaj + 8 pritrdilnih točk LC 3000 daN, vgrajene in zložljive v dno prikolice s samonakladalnikom (razporejene) * Stranske luči za označevanje z vklopljenim smernikom * Orodjarna škatla 750 x 350 x 300 mm * Vlečna palica, brezstopenjsko nastavljiva po višini, vroče pocinkana, vlečni člen 40 mm * Široke pnevmatike 385/55R 19,5 (4 kosi), BPW osi, parabolične vzmeti * LED-osvetlitev za 12 in/ali 24 V * Obešalne kavlje * EBS s sistemom za nadzor tlaka v pnevmatikah * EBS-Multi-Voltage sistem za vlečna vozila z 12V in 24V * Smo Müller-Mitteltal, poslovni partner * Primer lizinga našega partnerja MMV Leasing, 575 EUR na mesec, neto, za 60 mesecev, brez pologa in 0 EUR preostanka * Druge možnosti trajanja najema z ali brez pologa/ostanka vrednosti Naše odprte ure: Od ponedeljka do četrtka: 08:00 - 17:00 Petek: 08:00 - 15:00 Zunaj odprtih ur vam smo na voljo po predhodnem dogovoru. Govorimo nemško, govorimo angleško, govorimo poljsko, govorimo francosko. * WhatsApp Možnost lizinga, financiranja, odkupa---

Stanje: rabljeno, lastna masa: 4.550 kg, največja dovoljena obremenitev: 13.450 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2016, dolžina tovornega prostora: 6.540 mm, širina tovornega prostora: 2.480 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: bež, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, 10 pairs of lashing rings, loading height approx. 900 mm, customer vehicle, -- subject to misprints, errors and changes -- sample images --, More data at: !, More Details: ! Lhjdpfszvvdzsx Ag Eok

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem | Low Loader | Platform Trailer Available in week 37/2026, Inquiry No.: 31941 Delivery to your address possible * We are happy to provide you with an individual offer * ---- * GVW: 14.4 t, Payload: 10.95 t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27m x 2.47m platform with galvanized 400mm front wall * Hardwood excavator bucket rest screwed to the front wall * Unloaded deck height: 930 mm / loaded: 870 mm * One-piece ramps with hot-dip galvanized anti-slip grating, can be pushed together to approx. 20 mm, secured by retaining rods and inclined supports * Ramp lift with vertically mounted, adjustable springs for easy single-person operation * 4 UVV drop lashing rings (LC 6300 daN) * Perforated outer frame (45° angled, perforated for lashing devices, lashing capacity per point LC 2000 daN with minimum spacing of 480 mm. Installation of drop lashing rings LC 3000 daN with approx. 600 mm spacing possible) with tight cross bracing, high-web front and rear end sections and access ramp at the rear, hot-dip galvanized Lhjdjzbfmqspfx Ag Ejk * 10 recessed UVV lashing rings LC 3000 daN in the existing hole matrix in the outer frame, additionally * Further lashing options via drill holes (Ø 50 mm, LC 1200 daN) in the front and end beams * Toolbox in front of the front wall * Side marker lights with indicator activation * Softwood floor, 50 mm thick. Chassis hot-dip galvanized * Height-adjustable support winch at the front, foldable supports at the rear * 2 container locks recessed in the front crossmember * Drawbar with 40 mm towing eye (hot-dip galvanized), height-adjustable, 50 mm eye available upon request * 1 LED marker light removable at the rear ---- * Leasing, hire purchase, financing, trade-in possible * e.g. 525 Euro per month over 60 months with no down payment or final residual value ---- * Our business hours * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 Outside of business hours available by appointment We speak German, English, Polish, French Leasing, financing, trade-in available

Stanje: novo, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.100 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, ABS, Zračno vzmetenje z možnostjo dviga in spusta, Tehtnice za obremenitev osi, Skupna dolžina nakladalne površine pribl.: 9.100 mm, Globoka postelja pribl.: 6.900 mm dolga, Višina nakladanja pod obremenitvijo pribl. 890 mm, 24 x pritrdilna ušesa po 10 t, 12 x žepov za kolike v zunanjem okviru, Plezalna letvica na zunanji strani ramp in zadnje poševnine, Dvodelne nakladalne rampe (pribl. 4.300 x 750 mm), Nakladalne rampe nastavljive vstran, Lesena tla debeline 68 mm, Skladiščna škatla s pokrovom za verige ali pritrdilne pasove, Označevanje obrisa po predpisih, Opozorilna rotacijska luč, Pomožna parkirna zavora z vzmetjo, Vklj. prikaz obremenitve osi, Vozilo pocinkano v potopni kopeli, Doplačilo za: Hidravlični premik ramp = cena: 1.000 €, -- Možne tiskarske napake, spremembe in napake so pridržane, vzorčne slike --, Več podatkov na: !, Več podrobnosti na: ! Lodpfx Ajzvvfrjg Eohk

Stanje: rabljeno, lastna masa: 3.210 kg, največja dovoljena obremenitev: 8.690 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 05/2021, naslednji pregled (TÜV): 06/2026, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.430 mm, višina nakladalnega prostora: 500 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17.5, Leto izdelave: 2021, Oprema: ABS, Nemško vozilo Lhodpfeyxbgcex Ag Ejk MASTERLINE Müller-Mitteltal KA-TA-R 11,9 trosmerni kiper sa rampama ispod utovarene Godina prve registracije: 05/2021 pocinkovan Dozvoljena ukupna masa: 11.900 kg Sopstvena masa: 3.210 kg Nosivost: 8.690 kg Dimenzije pneumatika: 235/75 R 17,5 Tandem osovina manja od 1 m Vučna ruda je neprekidno podesiva po visini, toplo pocinkovana, vučna kuka 40 mm Ram pocinkovan BPW osovine Visina poda: 0,93 m Dodatne usluge dostupne! Izvozne tablice (crvene / 30 dana) Nemačka Kratkoročne tablice (žute / 5 dana) Nemačka Moguća organizacija austrijskih prevoznih tablica Isporuka vozila (uz nadoknadu) Podaci dati na internetu su nezahtevne informacije. Ne predstavljaju zagarantovana svojstva. Prodavac ne preuzima odgovornost za greške, tipografske greške i greške u prenosu podataka. Prodaja uz mogućnost prethodne prodaje. Prodaja isključivo privrednim subjektima. Važe isključivo naši Opšti uslovi poslovanja.

Stanje: rabljeno, lastna masa: 3.450 kg, največja dovoljena obremenitev: 14.550 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2010, naslednji pregled (TÜV): 07/2025, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, barva: rumena, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 2 axles, turntable trailer, air suspension, ABS (anti-lock braking system), container locking mechanism, underrun protection, side aluminum side guard, twin tires. Body: 2-axle outer roller trailer for roll-off containers from 5.5 m to 7 m or 2x 10 m³ skip containers, BPW axles, drum brakes, pneumatic locking, pneumatic lowering drawbar. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Ljdpfx Agsxgilmj Ejhk

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Platform Trailer: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes Lhodpjv D Tbkefx Ag Eek ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lifting and lowering device ----Drawbar / Flange Eye: * Drawbar height-adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (results in a B-dimension of approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reverse lights at the rear (activated by reverse gear) * 1 removable LED beacon (including bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning panel sets at front and rear * Support winch at front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm, one on each side left & right * Side underrun protection * Rear underrun protection * Plastic quarter fenders ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable for 3 m container external width) and lockable; locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN compliant) with a total external width of 3,000 mm ----Load Securing: * Perforated outer frame approx. 45° bent with 2 t lashing force every 480 mm * Installation of 3 t lashing brackets possible every 600 mm - 5 x 3 t UVV-lashing brackets mounted per side * In each front and rear corner 1 x 6.3 t lashing ring (front directly behind the container locks in the wooden floor and rear in the end crossmember) * Various drillings in front wall and end crossmember for 1.2 t lashing options ----Ramps: * 1 pair of aluminium slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tired and tracked vehicles * Storage compartment under the loading platform at the rear, integrated into the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air tanks, front support winch and flange towing eye painted in a shade of black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from CW 39/2026

Stanje: rabljeno, lastna masa: 3.210 kg, največja dovoljena obremenitev: 8.690 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 05/2021, naslednji pregled (TÜV): 06/2026, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.430 mm, višina nakladalnega prostora: 500 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17.5, Leto izdelave: 2021, Oprema: ABS, Nemško vozilo MASTERLINE Müller-Mitteltal KA-TA-R 11,9 trosmerni kiper sa rampama ispod utovarene Godina prve registracije: 05/2021 pocinkovan Dozvoljena ukupna masa: 11.900 kg Sopstvena masa: 3.210 kg Nosivost: 8.690 kg Lodeyw N Npopfx Ag Eehk Dimenzije pneumatika: 235/75 R 17,5 Tandem osovina manja od 1 m Vučna ruda je neprekidno podesiva po visini, toplo pocinkovana, vučna kuka 40 mm Ram pocinkovan BPW osovine Visina poda: 0,93 m Dodatne usluge dostupne! Izvozne tablice (crvene / 30 dana) Nemačka Kratkoročne tablice (žute / 5 dana) Nemačka Moguća organizacija austrijskih prevoznih tablica Isporuka vozila (uz nadoknadu) Podaci dati na internetu su nezahtevne informacije. Ne predstavljaju zagarantovana svojstva. Prodavac ne preuzima odgovornost za greške, tipografske greške i greške u prenosu podataka. Prodaja uz mogućnost prethodne prodaje. Prodaja isključivo privrednim subjektima. Važe isključivo naši Opšti uslovi poslovanja.

Stanje: novo, največja dovoljena obremenitev: 8.600 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * KA-TA-R 11,9 Masterline: ----Zavore: * Wabco EBS * Sistem za sprostitev v sili za vzmetni akumulatorski cilinder * Bobnaste zavore ----Osi: * 2 x 5,5 t BPW osi ----Vzmetenje: * Parabolična vzmet s tandem sistemom za izravnavo ----Vlečna prikolica / prikolica s prirobničnim nosilcem: * Vlečna prikolica z možnostjo nastavitve višine za 300 mm, pocinkana, s prirobničnim nosilcem 40 mm ----Elektrika / osvetlitev: * Sistem za nadzor tlaka v pnevmatikah RDÜ * LED osvetlitev * 15-polni električni vtič Ljdpfxev Dz N Aj Ag Eehk ----Splošni dodatni deli: * Orodjarna iz pocinkane jeklene pločevine na desni strani * Vijakarno pritrjena zaščita pred trkom * Plastični blatnik * Jost mehanska podpora spredaj * 2 mehanski pocinkani zložljivi podstojka zadaj ----Nakladalna prikolica: * Očesne kljuke na straneh in zadaj v nosilcih osrednje ključavnice ter 3 na zunanji strani čelne stene * Pocinkano podvozje * Jeklena paleta, 3-stranska nakladalna prikolica * Neprekinjene stranske stene brez osrednje podpore, z možnostjo zlaganja s pomočjo vzmetne podpore za stransko ograjo * Zložljiva zadnja vrata in nihajna vrata s pomočjo ročne osrednje ključavnice * Vijakarno pritrjena pocinkana zadnja podpora * 4 mm jeklena pločevina na dnu * Nosilna tirnica zadaj za nakladalne rampe ----Varovanje tovorja: * Na vsakem vogalu 1 x 5 t, vgrajena in zložljiva privezna točka * Na vsaki strani 4 x 3 t, vgrajene in zložljive privezne točke v zunanjem okvirju ----Rampe: * 1 par aluminijastih nakladalnih ramp, približno 3.310 x 400 mm (nosilnost 8 t / par), primerne za vozila z gumijastimi in verižnimi gosenicami * Zaklenljiv prostor za shranjevanje zadaj pod nakladalno površino, vgrajen v podvozje ----Pnevmatike: * Pnevmatike 235/75 R 17,5 ----Barvanje: * Osi, vzmeti, zračni rezervoar, vlečna prikolica in podpore pobarvane v črni barvi * Stranska ograja pobarvana v RAL 9010, čisto bela * Barvanje stranskih sten v poljubni barvi RAL je mogoče proti doplačilu * Dno in čelna stena pocinkana ----Informacije: * Nadgradnja ojačana s certifikatom za varovanje tovorja v skladu z EN 12642 XL * Novo vozilo z garancijo proizvajalca * Pridržane spremembe in napake * Prodaja je rezervirana ----Dobavni rok: * Na voljo približno v 45. tednu 2026

Stanje: rabljeno, Leto izdelave: 2013, Različni kontejnerji za Müller-Mitteltal CHK: - 7 kosov 4,5 - 5 m³, cena na kos 1.000,- € - 3 kosi 8 m³, cena na kos 2.000,- € Vsi kontejnerji so v uporabnem stanju. Letniki 2013 - 2015. = Dodatne informacije = Lhsdpfx Agoxb N A Ie Ejk Država proizvodnje: DE Za več informacij kontaktirajte Jan-Marc Schwickert.

Stanje: novo, največja dovoljena obremenitev: 10.360 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic Brake System (EBS) * Emergency release device for spring brake cylinders * Drum brakes Lhjdpfxspk D Dqj Ag Ejk ----Axles: * Gigant axles ----Suspension: * Air suspension with lift and lower facility ----Drawbar / Flange Eye: * Drawbar height adjustable by approx. 300 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with in-cab display via EBS signal; no truck-side installation required) * LED lighting system * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Plastic toolbox, front right, mounted outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Provision for retrofitting 20" container locks at front and rear * Bolted bulkhead made of smooth sheet steel * Fold-down side walls, trapezoidal profile, with drop-side spring assists * Bolted, hot-dip galvanized rear stanchions ----Load Securing: * Outer frame with holes, approx. 45° angled, 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * Each of the front and rear corners fitted with 1 x 6.3 t lashing ring * Various holes in front and rear cross members for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for pneumatic and tracked vehicles; stowed at the rear in a compartment integrated below the deck in the chassis ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Vehicle fully hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to error and prior sale ----Delivery Time: * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 14.660 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, ETÜ-TA-R 19.0: ----Brakes: * Wabco EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: 2 x 10 t BPW Eco axles ----Suspension: * Parabolic springs – 110 mm wide – with tandem equalisation unit ----Drawbar / Drawbar Eye: Drawbar with 50 mm flange eye and height-adjustable drawbar ----Electrics / Lighting: * 15-pin electrical connector * LED tail lights * RDÜ tyre monitoring system ----General Attachments: * Jost landing leg at the front * External folding supports at the rear * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: Lsdpol Th Hlsfx Ag Eohk * 50 mm softwood floor * Preparation in front of the front wall for retrofitting container locks * Bolted front wall made of smooth sheet metal * Side walls made of trapezoidal-profiled steel, foldable with drop side spring lifters * Steel rear wall can be slid in between the ramps – storage bracket inside in front of the front wall when not in use * Rear stanchions bolted ----Load Securing: * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * In front and rear corners, each 1 x 10 t lashing ring; various holes in front wall and rear crossmember for 1.2 t lashing option * Profifix lashing rail centrally positioned along the longitudinal axis, with lashing capacity up to LC 3000 daN ----Ramps: * One-piece mech. grating ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be compacted to 20 mm) * Rear approach slope approx. 860 mm ----Painting: * Chassis, drawbar, front wall, rear wall, ramps, and folding supports hot-dip galvanised * Sideboard painted in RAL 9010 pure white * Painting of the side panels in any RAL colour available at extra cost * Axles, springs, air tank, flange eye and landing leg painted in black ----Info: * New vehicle with full manufacturer's warranty * Errors and prior sale subject to change ----Delivery Time: * Available immediately ex-works at Egestorf on the A7

Stanje: rabljeno, lastna masa: 3.590 kg, največja dovoljena obremenitev: 10.810 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2020, širina tovornega prostora: 5.040 mm, višina nakladalnega prostora: 2.420 mm, vzmetenje: jeklo, velikost pnevmatike: 285/70R19,5 150J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 285/70R19,5 150J, velikost zadnje pnevmatike: 285/70R19,5 150J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, spredaj za natovarjanje, pritrdilne zanke, –, dodatno plačilo za rampe 1.000 €, –, tiskarska napaka, napake in spremembe pridržane, vzorčne slike –, več informacij na: !, več podrobnosti: ! Lhedpjzt I Sxefx Ag Ejk

Stanje: novo, največja dovoljena obremenitev: 10.750 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14,4: ----Zavore: * Zavorna sistem – EBS * Sistem za hitro sprostitev zavor za vzmetne akumulatorje * Bobnaste zavore ----Os: * 2 x 7 ton, osi Gigant ----Vzmetenje: * Listne vzmeti z izravnalnim agregatom ----Vlečna droga / prirobnična vlečna droga: * Vlečna droga, nastavljiva po višini za 300 mm * Podaljšek vlečne droge za 250 mm na 2.250 mm * 40-milimetrska prirobnična vlečna droga ----Elektrika / osvetlitev: * Sistem za nadzor tlaka v pnevmatikah (RDÜ) * 15-polni električni priključek * LED-osvetlitev ----Splošni dodatni deli: * Prednja oporna noga * Zunanja, zložljiva oporna noga zadaj * Plastična orodjarna škatla, približno 858 x 500 x 500 mm, spredaj desno zunaj na čelni steni * Stranski zaščitni element * Plastični četrtni blatnik ----Površina za prevoz: * 50 mm debela deska iz iglavcev * Pred čelno steno in zadnjo poševnino, priprava za naknadno namestitev pritrdil za 20-palčne kontejnerje * Vijata čelna stena iz gladke pločevine * Stranske stene iz jeklene pločevine – trapezno profilirane – z možnostjo zlaganja na sredini, 1-krat razdeljene * Jeklena zadnja stena, ki se potiska med nosilce rampe, kadar se ne uporablja, se shrani v notranjosti pred čelno steno * Zadnji okvir, vijata ----Pripomočki za pritrditev tovor: * Zunanji okvir z luknjami, narejen pod kotom približno 45 stopinj, z nosilnostjo 2 toni, vsakih 480 mm Ledpfov Eq Evex Ag Eohk * Možnost vgradnje 3-tonskih pritrdilnih obročev vsakih 600 mm * Na vogalih, spredaj in zadaj, 1 x 6,3-tonska pritrditev * V čelni in zaključni palici različne luknje za 1,2-tonske pritrditve * ProfiFix pritrdilna letva na vzdolžni osi na sredini, za pritrditev do LC 3000 daN ----Rampe: * Enodelna mehanska rešetasta rampa z vzmetjo za delovanje z eno osebo, približno 2.750 x 600 mm (možnost potiskanja skupaj do 20 mm) * Zadnja nagnjena plošča, približno 860 mm, podvozje ----Medosna razdalja: * Medosna razdalja 1.140 ----Barvanje: * Vlečna droga, čelna stena, zadnja vrata, zložljive oporne noge in rampe, prevlečene z vročim cinkom * Os, vzmeti, rezervoar za zrak, prirobnična vlečna droga in oporna noga, prebarvane v črno barvo * Barvanje stranskih sten v RAL – 9010, čisto bela ----Informacije: * Okrepljena in certificirana nadgradnja po EN 12642 XL, vključno s certifikatom za pritrditev tovora * Novo vozilo z garancijo proizvajalca * Napake in predprodaja so vsebovane ----Dobavni rok: * Takoj na voljo iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 10.750 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14,4: ----Zavore: * Zavorna sistem – EBS * Naprava za izpust zavor v sili za vzmetne akumulatorje * Bobnaste zavore ----Os: * 2 x 7 ton Gigant osi ----Vzmetenje: * Parabolične vzmeti z izravnalnim mehanizmom ----Vlečna palica / prirobnična vlečna palica: * Vlečna palica, ki je nastavljiva po višini za 300 mm * Podaljšek vlečne palice za 250 mm na 2.250 mm * 40-milimetrska prirobnična vlečna palica ----Elektrika / razsvetljava: * RDÜ – nadzor tlaka v pnevmatikah * 15-polni električni vtič * LED-razsvetljava ----Splošni dodatni deli: * Podporni dvigalo spredaj * Zunanja zložljiva podpora zadaj * Plastična orodjarna škatla, približno 858 x 500 x 500 mm, spredaj na desni strani, na čelni steni * Stranska zaščita * Plastični četrtinarni blatnik ----Ploščad nizkega prikolice: * 50 mm ploščad iz iglastih plošč * Pred čelno steno in zadnjim naklonom, pritrdilna točka za naknadno montažo zapahov za transport 20-palčnih kontejnerjev * Vijična čelna stena iz gladke pločevine * Stranske stene iz jeklene pločevine - trapezno profilirane - zložljive, v sredini enkrat razdeljene * Jeklena zadnja stena, ki se lahko potisne med nosilce rampe, ko se ne uporablja, znotraj pred čelno steno * Zadnji nosilci, vijeni ----Pritrditev tovora: * Zunanji okvir z luknjami, nagnjen pod kotom približno 45 stopinj, z nosilnostjo 2 toni na vsakih 480 mm * Možna je vgradnja 3-tonske pritrdilne sponke na vsakih 600 mm * V vogalih spredaj in zadaj je po 1 pritrdilna točka z nosilnostjo 6,3 tone * V čelni in zaključni nosilni konstrukciji so različne luknje za pritrditev z nosilnostjo 1,2 tone * ProfiFix pritrdilna letev v vzdolžni osi, v sredini, za pritrditev do LC 3000 daN ----Rampe: * Enodelna mehanska rešetasta rampa z vzmetnim mehanizmom za upravljanje z eno osebo, približno 2.750 x 600 mm (lahko se potisne skupaj do 20 mm) * Zadnji naklon, približno 860 mm, podvozje ----Medosna razdalja: * Medosna razdalja 1.140 ----Barvanje: * Vlečna palica, čelna stena, zadnja vrata, zložljive podpore in rampe so pocinkane * Os, vzmeti, zračna posoda, prirobnična vlečna palica in podporni dvigalo so pobarvani v črni barvi Lhedpfev D Tcbox Ag Esk * Barvanje stranskih sten v barvi RAL 9010, čista bela ----Informacije: * Ojačana in certificirana nadgradnja po EN 12642 XL, vključno s certifikatom za pritrditev tovora. * Novo vozilo z garancijo proizvajalca. * Pridržana možnost sprememb in napak. ----Dobavni rok: * Na voljo takoj iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 13.490 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, TRA-Kombi 18,0: * 3 v 1 = za transport zabojnikov za odlaganje, zabojnikov za odvoz in kot nizkopodna prikolica ----Zavore: * EBS-E (električni zavorni sistem) * Naprava za izredno sprostitev zavor za vzmetne akumulatorje * Bobnaste zavore ----Os * 2 x 10,5-tonske osi Gigant ----Vzmetenje: * Zračno vzmetenje z ročnim spuščanjem zadnje osi ----Vlečna priprava: * Pnevmatično spuščana vlečna priprava, dolžine 2.100 mm, z vlečnim ušesom 40 mm in napravo za nastavitev višine ----Elektrika / Osvetljava: * Sistem za nadzor tlaka v pnevmatikah (RDÜ), možnost prikaza na tovornjaku preko signala EBS (brez vgradnje na tovornjaku) * LED zadnje luči 12 / 24 V * 15-polni priključek ----Splošni dodatki: * Orodjarna omara iz prašno lakirane jeklene pločevine * Nosilec rezervnega kolesa na desni strani karoserije * Zaprt stranski zaščitni element * Plastični četrtni blatnik z zaščito proti brizganju * Plastični zaščitni odbijač na zadnji strani * Zložljiva opozorilna tabla na zadnji strani ----Tovor * Vroče pocinkana glavna konstrukcija z dvignjenim zunanjim okvirjem za vodenje zabojnikov * Jeklena pločevina z vdolbinami za valje v območju podvoza * Pri transportu zabojnikov za odlaganje je mogoča dolžina tovornega prostora 5.500 - 7.000 mm * Pnevmatična 4-delna zapornica in mehanski vtični oporni kot spredaj na tirnici * Možen transport do 2 zabojnikov za odlaganje z največjo prostornino 10 m³ * 8 zamenljivih opornih elementov za stransko centriranje zabojnikov, sprednji 4 oporni elementi so vtični in pomični * Varilna črta kot protidrsna prevleka v območju tirnice * Mehanske oporne noge zadaj ----Varnost tovorja: * 3 pari 10-tonske UVV pritrdilne točke na strani za pritrditev napenjalnih elementov za varno pripenjanje zabojnikov, vsaka točka ima 4 pritrdilne zanke v obliki deteljice (stransko) * 1 par 13,4-tonske UVV pritrdilne točke spredaj * Na vsaki strani 4 x 8-tonske pritrdilne zanke, vgrajene v zunanji okvir ----Rampe: * Alumijaste naloževalne rampe (10,6 tone / par), 2.800 x 470 mm, primerne za vozila z gumijastimi in goseničnimi pogoni (zaklenjen prostor za shranjevanje zadaj) ----Barvanje: * Reflektirajoča stranska in zadnja oznaka * Okvir vroče pocinkan * Os, vlečna priprava, barvani v črno Ljdpfx Aowb Rakeg Eehk ----Informacije: * Potrdilo o varnosti tovorja v skladu z DIN 30722-1 * Potrdilo o varnosti tovorja v skladu z DIN EN 12195-1, DIN EN 12640, DIN EN 12642 in VDI 2700 * --Možna največja dovoljena masa 20.000 kg-- * Novo vozilo brez prve registracije z garancijo proizvajalca * Pridržujemo si pravico do sprememb in napak ----Dobavni rok: * Takoj na voljo iz Egstorfa

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assemblies ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, approx. 300 mm * 40 mm flange drawbar eye ----General Attachments: * Jost mechanical landing gear, front * External, hot-dip galvanized folding supports, rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted on front wall outside ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 15-pin power connector * LED tail lights ----Loading Platform: * 50 mm softwood floor * 20'' container locks mounted at front and rear * Bolted smooth steel front wall * Drop sides, steel, trapezoidal profile, drop-down with drop-side lifting springs * Hot-dip galvanized, bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing brackets every 600 mm (5 lashing rings fitted each side) * 1 x 6.3 t lashing ring fitted in each corner front and rear * Various holes in front and rear transverse beams for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear storage compartment integrated in the chassis below the loading area ----Paintwork: Lhodel Thy Rspfx Ag Ejk * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Drop side color in RAL 9010 pure white * Side panels can be painted in a RAL color at extra cost ----Info: * New vehicle without registration * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately from Egestorf

Stanje: rabljeno, konfiguracija osi: 3 osi, Leto izdelave: 2015, = Dodatne možnosti in dodatna oprema = - Zračno vzmetenje zadaj - Zračno vzmetenje spredaj - Centralno mazanje = Opombe = GOVORIM PO RUSKO - Yuriy, mobilna številka: 3-osni nizkopodvozni priklopnik, ki ga je mogoče prevoziti. Priklopna platforma, približno 3.900 x 2.550 mm, z aluminijastimi stranskimi stenami, nizkopodvozna platforma, približno 9.050 x 2.550 mm, 4 vdolbinice za kolesa z izvlečnimi deli, vdolbinice spredaj, približno 390 mm, zadaj, približno 290 mm, medosna razdalja, približno 3.100 mm, nosilec za roko bagra. Višina nakladanja, približno 900 mm. 34 pritrdilnih točk, zložljive razširitve na 3.000 mm, opozorilni paket za presežne dimenzije. Hidravlične rampe, dvodelne, približno 4.300 x 720 mm, z gumijasto oblogo, hidravlično premikljive, BPW osi, 3 osi, hidravlično prisilno krmiljenje, vključno z daljinskim upravljalnikom, EBS, zračno vzmetenje, dvižna os. Dovoljena skupna masa 48.000 kg, masa na priklopno glavo 18.000 kg, nosilnost 35.350 kg. Kraljevski vijak 2 palca, višina priklopne glave, približno 1.250 mm. Orodjarna na priklopni platformi. Pnevmatike 235-75R17.5. Dvojni zračni sistem, hidravlična črpalka. Centralno mazanje. Barva: MB 5361, encijan modra. Tehnični pregled veljaven do 07-2027. = Dodatne informacije = Lastna masa: 12.650 kg Nosilnost: 35.350 kg Dovoljena skupna masa (zGG): 48.000 kg Pnevmatike spredaj: 235-75R17.5 Pnevmatike zadaj: 235-75R17.5 Lodpezq Rg Hefx Ag Ejhk Država proizvodnje: DE Za dodatne informacije se obrnite na Jana-Marca Schwickerta.

Stanje: novo, največja dovoljena obremenitev: 8.900 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Flatbed: ----Brakes: Lodpfx Aey U A Elsg Eehk * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Air suspension with lift and lowering function ----Drawbar / Flange Drawbar Eye: * Drawbar height adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (thus B-measurement approx. 8,080 mm) * 40 mm flange drawbar eye ---- Electrics / Lighting: * 15-pin power plug * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (switched via reverse gear) * 1 removable LED beacon (including bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning boards front and rear * Landing gear at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each side left & right * Side underrun protection * Rear underrun guard * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container outside width) and lockable, locking dimension retracted to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension not to DIN) with an absolute external width of 3,000 mm ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing brackets every 600 mm - five 3 t UVV lashing brackets installed on each side * In each front and rear corner, 1 x 6.3 t lashing ring (front directly behind the container locks in the wooden floor, rear in the end cross member) * Various drill holes in the front and rear cross member for 1.2 t lashing options ----Ramps: * 1 pair aluminium slide-in ramps approx. 3,310 x 410 mm (load capacity 8 t / pair) suitable for rubber-tyred and tracked vehicles * Rear stowage compartment under the loading area integrated into the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun guard, and rear supports hot-dip galvanized--- * Axles, air tanks, front landing gear and flange drawbar eye painted in black ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images ----Delivery Time: * Available from approx. CW 38/2026

Stanje: novo, največja dovoljena obremenitev: 8.900 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Flatbed: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Air suspension with lift and lowering system ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in dimension B: approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system, 12 / 24 V * 2 additional LED reversing lights at the rear (controlled via reverse gear) Lhsdpfx Agjy U A Efs Eek * 1 removable LED beacon (incl. holder) at the rear * Tire pressure monitoring system (TPMS) ----General Fittings: * Mechanically adjustable 3-metre warning panel sets, front and rear * Support winch (front) * External foldable support legs (rear) * Plastic toolboxes approx. 750 x 350 x 300 mm, mounted left and right * Side underrun protection * Rear underrun protection * Quarter mudguards (plastic) ----Loading Platform: * 400 mm high bolted front wall * 50 mm softwood flooring * 2 pairs of container locks (extendable to 3 m container external width), lockable – locked to ISO - DIN 15190 = 2,259 mm, extended = 2,819 mm (this measure is not to DIN), for an absolute external width of 3,000 mm ----Load Securing: * Perforated outer frame, approx. 45° angled with 2 t lashing capacity every 480 mm * Installation possible for 3 t drop lashing rings every 600 mm. (5 x 3 t UVV-certified lashing rings per side) * In the front and rear corners, 1 x 6.3 t lashing ring each (front directly behind the container locks in the wooden floor, rear in the end crossmember) * Various drilling holes for 1.2 t lashing points in the front wall and rear crossmember ----Ramps: * 1 pair of aluminium slide-in ramps, approx. 3,310 x 410 mm (load capacity 8 t/pair) – suitable for rubber-tyred and tracked vehicles * Storage compartment at the rear, recessed under the loading platform in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection, and rear supports hot-dip galvanized--- * Axles, air tanks, front support winch and flange towing eye painted black ----Further Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images ----Delivery Time: * Available from approx. calendar week 38/2026

Stanje: novo, največja dovoljena obremenitev: 14.400 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-ER 19.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering device ----Drawbar / Flange Towing Eye: * Drawbar with 50 mm flange towing eye, height-adjustable by 110 mm via offset plate ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * LED tail lights 12/24 Volt ----General Attachments: * Jost landing leg at the front * External folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side * Side underrun protection Lhjdpfx Agjmi Tmaj Eek * Plastic quarter mudguards ----Low-loader Platform: * Reinforcement package on chassis for drilling rig transport * 50 mm softwood floor, clamped type * Preparation in front of front wall for retrofitting container locks * Bolted smooth plate front wall * Split steel side walls – trapezoidal profile – foldable with central folding stanchion * Steel rear wall slide-in between ramps – bracket for storage in front wall when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45-degree angled, with 2 t lashing force every 480 mm * Option for installation of 3 t drop lashing rings every 600 mm * Lashing package: 1 x 10 t UVV lashing ring in each front and rear corner, 2 x 8 t UVV retractable lashing rings each side in the outer frame, various holes for 1.2 t lashing options in the front and rear crossmembers ----Ramps: * One-piece slide-in ramps 12 t/pair, ramps approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm ----Loading Height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ----Tyres / Wheelbase: * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, rear flap, folding supports and access ramps hot-dip galvanized * ---Axles, air tanks, flange towing eye and landing leg painted in a shade of black--- * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Stanje: rabljeno, lastna masa: 3.450 kg, največja dovoljena obremenitev: 14.550 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2010, naslednji pregled (TÜV): 07/2025, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, barva: rumena, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 2 axles, turntable trailer, air suspension, ABS (anti-lock braking system), container locking mechanism, underrun protection, side aluminum side guard, twin tires. Body: 2-axle outer roller trailer for roll-off containers from 5.5 m to 7 m or 2x 10 m³ skip containers, BPW axles, drum brakes, pneumatic locking, pneumatic lowering drawbar. Ljdpfewypl Nox Ag Eohk ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!