Faymonville Max Trailer Max100 4A 8.60 U nakup rabljenega (48.437)

Stanje: novo, največja dovoljena obremenitev: 18.275 kg, skupna masa: 25.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, skupna višina: 860 mm, Oprema: ABS, MAX Low Loader NEW – Stepped Loading Platform | 18.3 t Payload | Ramps | from €47,400 New vehicle – individually configurable to your application. Robust low loader trailer for the secure transport of construction machinery, vehicles, and heavy equipment. Compact design with high payload and powerful ramp system for daily use on construction sites. ----Highlights ? Approx. 18,275 kg payload ? Stepped loading platform with rear bevel ? Hydraulic steel ramps, adjustable ? Ramp load capacity up to 40,000 kg per pair ? High-tensile steel construction ? BPW axles with air suspension ? EBS braking system with spiral cable ----Technical Specifications ? Gross weight: 25,000 kg ? Unladen weight: approx. 6,725 kg ? Payload: approx. 18,275 kg ? Load platform length: 8,600 mm ? Load height at max. load: approx. 860 mm ? Overall width: 2,540 mm ? Speed: 80 km/h ? Axle spacing: 1,360 mm ----Standard Equipment ? Stepped loading platform with hardwood floor (approx. 48 mm) ? Checker plate covering above the axles ? Multiple lashing points up to LC 10,000 daN ? Galvanized, one-piece steel ramps with hardwood covering ? Hydraulic ramp lift system ? High-strength fine-grained steels (S355 / S690) ? BPW axles, air-suspended, drum brakes ? LED lighting ASPÖCK NORDIK ? EBS brake system (2S/2M) Bdsdpfxsypa Irj An Ioc ----Included Options / Accessories ? Bogie with towing bar (1,750 mm) and towing eye Ø 40 mm ? Electro-hydraulic unit mounted under the rear load platform ? Tire pressure monitoring system TPMS (ECE R141) ? Cover plates between ramps and loading platform ? Ramp control valves at right side ? Galvanized supports under the platform slope ? Rotating beacon bracket at rear ? Extendable warning signs with LED ? Tools & documentation on USB ? Additional license plate holder, rear right ----Further equipment and custom adaptations available at any time – we configure your vehicle exactly to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: novo, največja dovoljena obremenitev: 33.975 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, skupna višina: 860 mm, Oprema: ABS, MAX Lowbed Trailer NEW | 9.3 m Loading Platform | Ramps | approx. 34 t Payload | from €56,600 New vehicle – individually configurable for your application. Robust lowbed trailer with a dropped loading deck and high-performance ramp system for professional transport of construction machinery, vehicles, and heavy equipment. Engineered for high payload, long service life, and reliable use on job sites. -- Highlights -- • Approx. 33,975 kg payload • Dropped loading platform with rear bevel • Hydraulic, sliding steel ramps Bodjypazlspfx An Iodc • Ramp load capacity up to 40,000 kg per pair • Drawbar version with turntable • High-strength steel construction • BPW axles with air suspension • EBS brake system -- Technical Specifications -- • Gross weight: 42,000 kg • Tare weight: approx. 8,025 kg (±3%) • Payload: approx. 33,975 kg • Loading platform length: 9,300 mm • Overall width: 2,540 mm • Loading height at max. load: approx. 860 mm • Axle spacing: 1,360 mm • Max. speed: 80 km/h -- Standard Features -- • Dropped loading platform with approx. 48 mm hardwood flooring • Checkered plate over axles • Multiple lashing points up to LC 10,000 daN • Galvanized, one-piece steel ramps (approx. 3,000 × 800 mm) • Hydraulic ramp lifting system • High-strength fine-grained steels S355 / S690 • BPW axles, air suspension, drum brakes • EBS braking system (2S/2M) with spiral cable • ASPÖCK NORDIK LED lighting -- Included Options / Equipment -- • Turntable with approx. 1,750 mm long drawbar and 50 mm towing eye • Coupling height loaded: approx. 630–810 mm • Electro-hydraulic unit at rear under loading platform • Tire pressure monitoring system TPMS (ECE R141) • Cover plates between ramps and loading platform • Ramp control valves on right-hand side • Galvanized support legs under rear bevel • Rear LED rotating beacon bracket • Extendable warning panels with LED • Reflective tape in accordance with EU regulations • Additional license plate bracket rear right Further features and individual customization available on request – we configure your trailer to your exact requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: rabljeno, prva registracija: 11/2010, barva: drugo, Leto izdelave: 2010, GOODYEAR pnevmatike v dobrem stanju za mega ali nizkopodestni priklopnik. Bdedpfx Ansxvx Iie Ijc

Stanje: novo, skupna masa: 3.000 kg, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.000 mm, Leto izdelave: 2024, At ANHÄNGERWIRTZ, a wide range of popular models and versions are available for delivery. More truly means added value... Our Brian James trailers for professionals offer the most comfortable solution for vehicle transport. Would you like to purchase one of the best transporters? For example, the A4 125-2424 with alloy wheels, tyre rack, and toolbox—here equipped with an underfloor toolbox and rear supports, 240 cm long retractable loading ramps, spare wheel, and lockable coupling! Features also include a winch with pulley, front storage box, and tyre rack. Further options available, such as: – 100 km/h high-speed approval – Wheel chocks Images shown are for illustrative purposes only and do not constitute a binding offer. Purchase offers are available 24/7 in our online shop at trailershop. We accept trade-ins of all trailers on-site and offer financing from €0 down payment. Sales by phone and by appointment on site during our business hours: GREVENBROICH Jägerhof 10 A 41516 Grevenbroich (Hülchrath) Sales opening hours: Mon – Fri 08:00–12:30 & 14:00–18:00 Bodpfx Aoy Rhukon Iodc or 24/7 via our online shop at trailershop. Images and descriptions in this advertisement are copyright protected. Logos are protected by trademark law. 05/26 125-2424 Show model 125-2424+VERSIONBLACK

Stanje: novo, skupna masa: 3.000 kg, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.000 mm, Leto izdelave: 2024, Many common models and configurations available..... More really means more value..... Our Brian James Trailers for professionals offer the most comfortable solution for vehicle transport. Interested in purchasing one of the best transporters? For example, the A4 125-2424 with alloy wheels, tire rack, and dust box, here featuring an underfloor storage box, rear supports, 240 cm long retractable loading ramps, spare wheel, and lockable hitch! Also included: winch with deflection pulley, front storage box, and tire rack. Other available options include: 100 km/h speed package Wheel chocks Images do not constitute a binding offer and are for illustrative purposes only. Purchase offers available around the clock in our online shop trailershop. Trade-in of all trailers possible at our location, as well as financing with €0 down payment. Sales via telephone and by appointment on-site during our opening hours. GREVENBROICH Jägerhof 10 A 41516 Grevenbroich (Hülchrath) Sales opening hours: Mon. – Fri. 08:00–12:30 & 14:00–18:00 Bdjdpfxoy Echhs An Isc or 24/7 in our online shop at trailershop Images and description in this advertisement are copyright protected – logos are protected by trademark law. 04/26 125-2424 Display Model 125-2424+VERSIONBLACK

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 06/2016, prostornina tovornega prostora: 90 m³, skupna dolžina: 14.040 mm, skupna širina: 2.550 mm, vzmetenje: zrak, medosna razdalja: 9.370 mm, barva: bela, Leto izdelave: 2016, Oprema: ABS, = Additional options and accessories = - Alcoa Dura-Bright wheels - Aluminum floor - BPW axles - EBS (Electronic Braking System) - Remote control for Cargo Floor - Rear doors - Lift axle - Kingpin - LED lights - LED work lights - Alloy rims - Steering axle - Air suspension - Trailing steering axle - Spare wheel - Sliding tarpaulin cover - Disc brakes - Central lubrication system = Remarks = Knapen K200 Year: 2016 10mm Cargo Floor AS-1 lift axle AS-4 lift/steer axle Front wall door Spare wheel holder with spare wheel Stainless steel storage box Wabco Smartboard Radio remote control Alcoa Dura-Bright wheels BPW axles LED lighting Automatic lubrication system NL Trailer MOT/TÜV valid until 13-06-2026 = Further information = Axle configuration Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Alloy rims; lift axle; max. axle load: 9,000 kg; tyre tread left: 30%; tyre tread right: 30% Rear axle 2: Alloy rims; max. axle load: 9,000 kg; tyre tread left: 30%; tyre tread right: 30% Rear axle 3: Alloy rims; max. axle load: 9,000 kg; tyre tread left: 40%; tyre tread right: 40% Rear axle 4: Alloy rims; lift axle; max. axle load: 9,000 kg; steered; tyre tread left: 30%; tyre tread right: 30% Weights Unladen weight: 9,240 kg Payload: 41,760 kg Gross vehicle weight: 51,000 kg Condition Technical condition: very good Optical condition: very good Damages: none Identification Registration: OP-20-HK = Company information = Bodpfsy Dhrijx An Ijdc Want to finance this vehicle? No problem. We will quickly arrange an attractive leasing contract for you with a term of 12, 24, 36, 48 or 60 months. You can find all photos and further information on our website or contact us directly.

Stanje: rabljeno, največja dovoljena obremenitev: 13.710 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2013, dolžina tovornega prostora: 7.350 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.600 mm, Oprema: ABS, WEB Trailer Curtain-Sider SAF Axles Through-Loadable At a Glance · First registration: 07.10.2013 · Colour: grey · Unladen weight: 4,290 kg · Payload: 13,000 kg · Internal dimensions: 7.35 x 2.48 x 2.6 m (LxWxH) · Tyres: 385/55 R 22.5 · Note: Available immediately Special equipment Curtain-sider trailer, through-loadable, SAF axles (9 t), disc brakes, 22 ALU slats, 6 pairs of lashing rings, ABS, EBS, 1 x 15-pin electrical connection, adjustable drawbar (diameter 40 mm), ramp buffers. Standard equipment 2-axle design, lift and lower valve, chock, underride guard, rubber mat, rear access ladder. Errors, typographical mistakes, and interim sales reserved. The seller reserves the right to withdraw from the sale. _____ Internal reference for inquiries: TR26168 _____ STARENT Truck & Trailer GmbH Bruck 49, A - 4722 Peuerbach Sales contacts: Mr. Ing. Wimmer Christoph (German, English, Czech, Polish, Italian) Bjdpfx Asy U S Tfjn Iodc p: also WhatsApp t: @: Mr. Mehmet Terzi (German, Turkish, English, Russian, Ukrainian, Bosnian, Serbian) p: / also WhatsApp t: -104 @: Mr. Elias Höfler (German, English, Bulgarian, Bosnian, Serbian) p: / also WhatsApp t: -123 @: We speak 13 languages. Certainly yours too. Contact us! Homepage: Facebook: Instagram: Starent Truck & Trailer GmbH buys your commercial vehicles such as tractor units, trailers, trucks and vans. Michael Doblhofer (German, English) p: also WhatsApp t: -102 @: Michael Leirich (German, English) p: WhatsApp t: -125

Stanje: novo, skupna masa: 3.500 kg, Insulated high-capacity container – internal height 2,320 mm, insulated ceiling. Container dimensions: 2,991 x 2,200 x 2,591 mm Internal height: 2,320 mm Paint: RAL 7016 The container is insulated: • Floor: 60 mm mineral wool • Roof: 60 mm mineral wool • Interior: steel sheeting, including electrical installations • 1 distribution box • Double power outlets Large display window, double aluminum rear door. Trailer fully galvanized, tandem axle, 4 container locks, Triplex front wheel, full LED lighting all around, sequential LED indicators, 5-chamber aluminum rims. Bdsdpfx Ash N Uuhsn Isc Delivery available within Germany, Austria, and Italy.

Stanje: rabljeno, največja dovoljena obremenitev: 22.170 kg, skupna masa: 30.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2016, naslednji pregled (TÜV): 04/2027, dolžina tovornega prostora: 13.400 mm, širina tovornega prostora: 2.500 mm, Leto izdelave: 2016, Oprema: ABS, WEB Trailer Refrigerated Box Semi-Trailer with Carrier Vector 1350 | Floral Width 2.50 m | SAF Axles --- VEHICLE HISTORY --- - German vehicle - One owner - Immediately operational --- VEHICLE EQUIPMENT --- - Refrigerated box semi-trailer - WEB Trailer body - 2 axles - Disc brakes - SAF axles - Air suspension - Galvanized chassis - MBB Bär tail lift --- REFRIGERATION UNIT --- - Carrier Vector 1350 - Diesel operating hours: 4,367 h - Electric operating hours: 8 h - Last maintenance at 4,190 h - Next maintenance due at 5,690 h --- TAIL LIFT --- - MBB Bär - Lifting capacity: 2,000 kg --- ADDITIONAL INFORMATION --- - Internal width: 2.50 m (floral width) - Internal height: 2.30 m - Tire size: 385/65 R22.5 - Tires in good condition - Semi-trailer available immediately - Semi-trailer ready for operation - Gross vehicle weight: 30,000 kg - Unladen weight: 7,830 kg - Payload: 22,170 kg Bedpfx Anjzalwao Ijdc --- EXPORT / NOTE --- Export sales only with deposit (min. €500 – €2,000). Export declaration EXW possible within 10 min (approved exporter). Vehicle reservations only in writing. Verbal commitments are non-binding. Subject to change, error, and prior sale. --- LEGAL NOTICE --- This advertisement does not constitute a binding offer as per §145 BGB. It is solely for contract initiation purposes. All information provided without guarantee. No assured properties. Sale exclusively in accordance with our T&Cs.

Stanje: novo, Leto izdelave: 2025, buy online and save at trailer-shop Numerous models available online from ANHÄNGERWIRTZ Convenient 24/7 online shopping Pick up yourself or opt for delivery. The online pickup market for your new trailer features leading brand manufacturers! Over 850 new trailers in stock More than 130 used trailers always available. Bdjdpfxjy U D Syo An Iec Non-binding example: order and pick up directly from our showroom Various model versions available Box trailer Cargoboxx C700 plus roadster 375 (333)x180x200 cm cargo space, 2600 kg Pullman II twin-axle chassis, approved for 100 km/h, 185/65 R14 tyres, darkline alloy wheels, dark blue polyester module, aerodynamic front and roof, aluminium floor and rear wing door & loading ramp combination, reinforced rear ramp, lockable side door, interior lighting, lashing rings, third brake light, automatic jockey wheel, 13-pin connector, position lights… Only while supplies last! Invoice including VAT. Warranty – trailer dealer for over 35 years Sales & telephone ordering at the following times: Mon - Fri 8:00 - 12:30 & 14:00 - 18:00 or 24/7 in our online shop at trailer-shop de Colour and specification may vary Copyright - Trademark protection 05/26 Article no.: ROADSTERXLPLUS2600ALUPOLYKBSTAF

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 12.900 kg, skupna masa: 49.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2022, Leto izdelave: 2022, Faymonville 2-axle lowbed semi-trailer MEGAMAX 2x12 t PA 2 steered axles Single-extendable, 2 x 12 t pendle axles Overall length: approx. 13,500 mm Overall width: approx. 2,550 mm Neck width: approx. 2,480 mm Load bed width: approx. 2,550 mm Chassis width: approx. 2,550 mm Technically extendable: approx. 4,700 mm Coupling height (loaded): approx. 1,205 mm Loading height (max. loaded): approx. 1,005 mm Load area length: approx. 6,850 mm Chassis length: approx. 2,600 mm King pin distance to front: approx. 1,200 mm Swing radius of tractor unit (rear): approx. 2,300 mm Swing radius (front): approx. 1,800 mm Axle spacings: approx. 1,360 mm Bdsdpfx Aoy Hxd Ion Isc Gooseneck: - Gooseneck in SNT design for optimized load floor length, length approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth-wheel load: 25,000 kg Boiler deck: - Deep-designed extendable boiler deck "SUPER LOW" design - Length approx. 6,850 mm, with mechanical locking system Rear chassis: - Rear chassis with closed outer frame, chequer plate and continuous prism digger recess, approx. 1,250/700 x 505 mm, open at the rear - PENDLE-AXLE, all axles hydro-mechanically forced-steered - Burst hose valve on axle compensation cylinder with automated RESET function - Hydraulic cylinders with shut-off cocks and front pins to secure lifted position - Technical axle load: 12,000 kg each - Hydraulic axle levelling Brake system: - WABCO brake system, EBS-E according to regulations Chassis tyres: - 245/70 R 17.5 3PMS Metalizing: - Complete HRM metallization (High Resistance Metallisation) - Entire steel structure shot-blasted, then hot-finished with ZINACOR 850 (Zinc 85%, Alu 15%) Painting: - 6-coat final treatment - Entire steel structure shot-blasted after welding. One layer of zinc-based primer, one adhesion primer. Final coat with 2 layers of 2K lacquer (acrylic) in a single colour, followed by cavity sealing with special wax - Trailer colour: RAL 3002 Carmine Red - Rim colour: Silver Grey - Side board colour: Natural Aluminum Steel structure: - Steel structure made of high-strength fine-grained steels. - Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690Q/S700MC (yield strength 690MPa) - MAG welding process according to EN ISO 4063

Stanje: novo, največja dovoljena obremenitev: 96.500 kg, skupna masa: 126.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 26.900 mm, skupna širina: 2.750 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Hydraulically lift/lowerable and detachable gooseneck, approx. 3,650 mm long * For tractor units: 6x4 or 8x4 * Truck hydraulic connection with flow control (20 l/min), incl. gantry for supply line suspension; the tractor unit tank must have at least 80 l capacity * With MAX Trailer coupling units; otherwise, coupling units to be provided ex works by the customer * Gantry with winch for spare wheel mounted at the front of the gooseneck * 3.5-inch king pin * Steel front wall approx. 400 mm high * Removable aluminium side and rear boards on the gooseneck, approx. 400 mm high, anodised finish * Control lever on the gooseneck protected by a folding cover * Operator area lighting at gooseneck, with on/off switch * One 7-pin socket each at the left and right rear of the gooseneck for warning sign * BEKA-MAX central lubrication system for one gooseneck with standard NLGI-2 grease * Hydraulic connections from the gooseneck to the low-bed via screw couplings * Access steps on the gooseneck * Four warning panels extendable by approx. 1,000 mm (approx. 423 x 423 mm) each, with one LED position lamp and bracket for beacon * Mounting adapters for 2 spare wheels * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 hp) at 3,000 rpm * Hydraulic connecting lines between powerpack and connector plate at the gooseneck * One LED worklight left and right on the rear plate of the gooseneck, individually switchable * Radio remote control for: - Operating the powerpack, start/stop of diesel engine. - Operating remote steering (in addition to cable remote), with 2 LED indicator lights on receiver for single-track control. - Lift/lower gooseneck. - Lift/lower suspension of running gear 2-axle front module: * Bolt-eye coupling front and rear. Length: approx. 2,970 mm. Module width: approx. 2,750 mm * BEKA-MAX central lubrication system for 2-axle module with standard NLGI-2 grease (not connected to steering rods) * One 7-pin socket each at the left and right rear of the front module for warning signs * Platform surface with sand coating as slip protection * Yellow reflective tape in accordance with EU regulations at the sides, on the extension, and at the rear of the trailer * One 7-pin socket for warning signs, left and right on the front module, in the axle area * Extendable outriggers approx. 230 mm per side for the 2-axle module * 1 pair M42 threaded blocks between the axles of the front module * 1 pair brackets for plug-in warning panels in the stake pockets of the exterior frame of the loading area Loading platform: * 6-axle, double telescopic loading platform with bolt-eye coupling at the front and rear chamfer approx. 500 mm x 8° * Platform length: approx. 11,000 mm * Technically extendable by: approx. 8,200 + 7,700 mm Bdedpfezahp Sex An Ijc * Axle spacing: approx. 1,500 mm * Base width: approx. 2,750 mm * Hydraulic coupling pin * BEKA-MAX central lubrication system for the platform with standard NLGI-2 grease * Platform surface with sand coating as slip protection * 11 pairs of recessed lashing rings in the external frame of the loading platform, foldable outwards (LC 10,000 daN) * Permanently welded intermediate table, approx. 500 mm long * 1 pa...

Stanje: novo, največja dovoljena obremenitev: 36.040 kg, skupna masa: 53.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete inventory of immediately and short-term available vehicles can be found on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck: * Gooseneck in SNT design to optimize loading deck length, approx. 3,750 mm long * Gooseneck hydraulically liftable/lowerable and detachable * For tractor units: 6 x 4 or 8 x 4 Lowbed: * Lowbed with exterior beams, extendable, SUPER LOW design, approx. 8,000 mm long * Lowbed with fixed hardwood flooring approx. 40 mm thick and mechanical locking * Supply lines routed protected within the extendable beams, automatically adapting to the lowbed length * 7 pairs of folding lashing rings outward (LC 10,000 daN) * 6 pairs of threaded mounting blocks on the inner beam for screwable RUD rings Rear chassis: * Rear chassis with closed outer frame and tread plate cover * Chassis with excavator recess, closed in the rear half to house air tanks * 3 pairs of folding lashing rings outward (LC 5,000 daN) * 1 pair of folding lashing rings outward (LC 10,000 daN) * 1 pair of horizontal lashing rings, positioned front & rear on the chassis (LC 10,000 daN) Axles: * BPW axles and suspension, all axles with hydro-mechanical forced steering * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve Tyres: Bdsdpey Uwu Ijfx An Ioc * Tyres 245/70 R 17.5 3PMSF – manufacturer at choice. Load index (146/146F) Braking system: * WABCO braking system according to EU regulations with EBS-E (2S2M) Coating: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure optimal corrosion protection * Finished with 2 coats of 2K paint, single-colored in RAL 3002 Carmine Red, per RAL System 841GL Includes accessories: * 2-inch kingpin * One galvanized steel front bulkhead, approx. 400 mm high * At the galvanized front connection strip, yellow-red air couplings * Remote axle steering, from front and rear, operated by cable remote control with push buttons, including axle alignment monitoring (without installation on the tractor unit) * Preparation for bolt-on container lockings to accommodate 1 x 20', 1 x 40', or 1 x 45' container on the outer rails. Without container locks * Hydraulic connections from gooseneck to lowbed with a multicoupling instead of screw couplings * Electrohydraulic unit * Spiral cable (approx. 35 mm², approx. 3.5 m in length, max. 250A) for the power supply to the electrohydraulic unit and/or the electric winch, with plug connection (NATO-NATO) between trailer and tractor unit * Yellow reflective tape according to EU regulations, on the sides, extension, and at the rear of the trailer * At the gooseneck front and rear left and right, each with a holder for warning signs, including socket * Manual and documentation on USB stick * Central lubrication system with 2 pumps BEKAMAX (Pico) with standard grease NLGI-2 and removable protection for the pumps * 7 pairs of threaded blocks between the lashing rings under the top flange on the outer rail for mounting screwable RUD rings VLBG-4 * 2nd ride height, approx. 50 mm above standard ride position, selectable via manual control * On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm (L x H). The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) * Separate air connection with air gun on the gooseneck * A stainless steel toolbox, INOX, approx. 1,350 x 400 x 400 mm

Stanje: rabljeno, največja dovoljena obremenitev: 34.400 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2015, dolžina tovornega prostora: 9.530 mm, širina tovornega prostora: 1.565 mm, višina nakladalnega prostora: 1.650 mm, skupna širina: 2.550 mm, skupna višina: 2.800 mm, Oprema: ABS, Betonski notranji nakladač, nakladalna dolžina: 9530 mm, nakladalna širina: 1.565 mm, v nakladalnem prostoru kotni profili za sprejem palet, hidravlično varovanje tovora, po 6 obročev za pritrditev težkih bremen na vsaki strani, zunanji NATO zagonski priključek, ABS, EBS, BPW Eco os(i), bobnaste zavore, podstavki spredaj, vozilo je lahko polepljeno z reklamami in/ali označeno. SI86628 Naša ponudba je načeloma brez nove TÜV homologacije. Če želite novo TÜV homologacijo, vam z veseljem pripravimo ponudbo naših partnerskih delavnic! Vozilo je lahko polepljeno z reklamami in/ali označeno. Veljajo naši splošni pogoji dobave in plačila. Bjdpfx Aoymu Iujn Isdc Za ta objekt vam z veseljem pripravimo tudi ponudbo financiranja ali leasinga. Prosimo, kontaktirajte nas!

Stanje: rabljeno, največja dovoljena obremenitev: 34.400 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2007, dolžina tovornega prostora: 9.550 mm, širina tovornega prostora: 1.570 mm, višina nakladalnega prostora: 1.650 mm, skupna širina: 2.550 mm, skupna višina: 2.800 mm, Oprema: ABS, Notranji nakladalnik za beton, dolžina nakladanja: mm, širina nakladanja: 1.530 mm, v nakladalnem prostoru kotni profili za namestitev palet, hidravlično varovanje tovora, 5x pritrdilni obroči za težke obremenitve na vsaki strani, zunanja zagonska vtičnica NATO, ABS, EBS, BPW Eco os(i), bobnasta zavorna naprava, sprednje podporne noge, vozilo je lahko polepljeno in/ali označeno z oglaševanjem. Bdodsymu Inspfx An Isc SI86625 Naša ponudba je praviloma brez nove TÜV homologacije. Če želite novo TÜV homologacijo, vam z veseljem pripravimo ponudbo naših partnerskih delavnic! Vozilo je lahko polepljeno in/ali označeno z oglaševanjem. Veljajo naši splošni pogoji dostave in plačila. Za ta objekt vam z veseljem pripravimo ponudbo financiranja ali leasinga. Prosimo, kontaktirajte nas!

Stanje: rabljeno, največja dovoljena obremenitev: 36.700 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2000, B= 12000 mm Teža praznog vozila 11300 kg STZ-V-labudova vrata pomerajuće unapred za utovar sa prednje strane zamenjiv 2" - čep/kraljevski zatik ugrađen hidromehanički sistem upravljanja hidraulična funkcija podizanja i spuštanja, uključujući cilindar za oslonac projektovano za tehničko opterećenje sedla do 18 tona aluminijumske bočne stranice, sa sve četiri strane radijus zakretanja 2400 mm Most platforme sa niskim ležajem dužina ravnog dela 5.000 mm, teleskopski produživa za 2.300 mm Bdodpfsy Hgh Ujx An Isc širina ravnog dela 2.550 mm visina konstrukcije 280 mm napred kukice za spajanje sa STZ-V-labudovim vratima 2 klinaste rampe za uspon na prednjem delu mosta sa niskim ležajem visina utovara oko 450 mm 3-osovinski trap zračno ogibljenje (DxŠ) cca 4.500 x 2.550 mm, uključujući ventil za podizanje i spuštanje, sa 3 prinudno upravljane osovine, Proizvođač: SAF, međuosovinski razmak 2x 1.310 mm Visine vožnje 970 mm Kočioni sistem dvocevni, pneumatski kočioni sistem na sve točkove preklopive proširenja u niskom ležaju visina sedla pod teretom: 1.250 mm sve 3 osovine hidraulički prinudno upravljane sa funkcijom naknadnog upravljanja

Stanje: rabljeno, konfiguracija osi: 1 os, prva registracija: 11/2011, vzmetenje: zrak, stanje pnevmatik: 40 odstotek, barva: drugo, Leto izdelave: 2011, Oprema: ABS, dvižna zadnja plošča, = Dodatne možnosti in oprema = - Zračno vzmetenje - Kolutne zavore - Krmilna os Bdjdpfoy Uiz Tjx An Isc = Dodatne informacije = Znamka osi: SAF Profil pnevmatik: 40% Zadnja os: dvojna montaža Nakladalna ploščad: MBB, zadnja vrata, 2500 kg

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 06/2020, Oprema: ABS, 3 priklopniki s hladilno enoto, vse enote letnik 2020 1x 2016 - 18.900 Bdsdowgud Dopfx An Iec 1x 2020 - 23.900

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 09/2016, Oprema: ABS, 3 prikolice s hladilno enoto, vse enote letnik 2020 Bdsdpfx Anjw N Anhs Ijc

Stanje: rabljeno, največja dovoljena obremenitev: 36.100 kg, skupna masa: 49.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2024, naslednji pregled (TÜV): 10/2026, skupna širina: 2.550 mm, Oprema: ABS, Our entire vehicle inventory, including immediately and soon available vehicles, can be found on our website. Bdsdpfx Aex Uvlljn Ijc Partial list of equipment. Full equipment details available upon request. Gooseneck: * Gooseneck in SNT design to optimize platform length, approx. 3,750 mm long, hydraulically liftable/lowerable and detachable * Technical fifth-wheel load: 25,000 kg * Suitable for tractors: 4x2, 6x2, and 6x4 Lowbed: * Lowbed designed as a telescopic vessel bridge in low-profile construction with front extension and mechanical locking * Length x width approx. 6,850 mm x 2,540 mm * Supply lines are protected inside the extendable beams and automatically adjust to the respective lowbed length Axles and Suspension: * PENDLE AXLE * All axles hydro-mechanically forced-steered * Hose rupture valve on axle compensation * Cylinders with automatic RESET function * Hydraulic cylinders fitted with shut-off valves and quick-connect pins for securing in raised position * Technical axle load: 12,000 kg per axle * Hydraulic axle compensation * Tires: 245/70 R 17.5 * Rear chassis with closed outer frame, checker plate cover, continuous prism excavator trough approx. 1,250/700 x 505 mm, open at rear Braking System: * WABCO EBS-E braking system compliant with EU regulations, without connection cable to tractor unit Paintwork: * Trailer color: RAL 3002 Carmine Red Included Accessories: * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power pack for hydraulic functions (excluding hydraulic winches; supply connection installation to the tractor not included) * Outer beams of the gooseneck with mounting holes for bolted lashing rings; first hole approx. 200 mm from the front, then every approx. 400 mm; 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear inclination of the gooseneck (LC 6,000 daN) * 2” king pin * One locking point approx. every 500 mm on the extension * 1 pair of steel ramps with climbing strips and locking bolts for bridging the deep-bed hook supports * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * Lashing rings with retaining spring approx. every 1,200 – 1,300 mm on the inner beams of the platform * Lashing rings with retaining spring approx. every 1,200 – 1,300 mm on the outer beams of the platform (LC 10,000 daN) on the top flange of the outer beams * Recesses above the lashing rings * 1 hanging lashing ring each left and right on the rear cross member (LC 10,000 daN) on the outer beams of the platform * Preparation for removable load floor * Hook-in rail at the front of the rear chassis to the lowbed for loose approach ramps * Chassis with chamfered corners at the rear * Hook-in rail for loose aluminum approach ramps at the rear traverse of the vehicle * Remote steering from front and rear via cable remote control with pushbuttons, axle tracking control, no installation in the tractor unit * Mechanical pin-tab coupling from lowbed to chassis for deck change or addition of extension beams, with electro-pneumatic-hydraulic couplings * Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) * 2 axle load gauges installed on the left side Including special accessories: * 1 pair of detachable anodized aluminum side walls on the gooseneck, approx. 400 mm high * A

Stanje: novo, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.930 mm, skupna širina: 2.480 mm, skupna višina: 4.000 mm, Leto izdelave: 2026, Oprema: ABS, WEB – Trailer ZPRASQ SYS 18 M Tube 19.5" Single Central Axle Chassis with Body for 27 mm Laminated Hardwood Floor Curtainsider body, side height 2,850 mm from loading surface to lower edge of outer beam Driving height unladen approx. 1,010 mm Axle loads: 18,000 kg (2 x 9,000 kg) Coupling height approx. 400 mm unladen (other heights optional) Chassis length approx. 6,000 – 8,000 mm (other lengths optional) Support load approx. 1,000 kg COC documents Outer frame height approx. 125 mm, with groove for lashing rings Chassis made from welded longitudinal beams and through inserted crossbeams 7 pairs of lashing rings 1 set of landing legs at front 1 set of drop legs at rear Bdjdpfx Anjg Dkzrs Isc Fixed drawbar with bolted towing eye Towing eye Ø 50 mm Axles by leading manufacturers (SAF/BPW/JOST) Axle 9t 19.5" small disc brake Without axle lift (optional) EBS brake system by Knorr or Wabco Air connections with Duomatic coupling Coiled flex cable Raise/lower valve with 1 rotary slide valve Knorr/Wabco 15-pin connector Premium tyres 445/45 R 19.5 Tyre pressure monitoring Body certificate according to DIN EN 12642 XL Conspicuity markings, ECE signs Sliding roof with automatic locking, opens from the rear (optionally from the front) Tail door with 4 internal locking rods made of steel sandwich panels 1 pair of lateral sliding curtains Front wall 90°, steel 400 mm steel cassettes, internal wear plate 3 rows of wooden slats (optional aluminium) Sliding curtain PVC 12x12, 880g Reinforced roof tarpaulin with 12x12 roof fabric Tension ratchet at rear and front LED lighting system 15-pin front connection Flashing SML Birch plywood floor, 27 mm transverse laid Floor: certificate for certified forklift axle load 7.2t according to DIN EN 283 Continuous rear lamp bracket Bolted underrun bar (rectangular tube) Folding and extendable access ladder at rear right with platform Two wheel chocks with holders, plastic or galvanised 2 rubber dock bumpers at rear corners Plastic mudguards, 180 degrees Anti-spray mudflaps Side underrun protection both sides, aluminium or plastic profile Chassis painted in RAL 9005 or Novagrau 7350; other colours available at extra charge (subject to powder colour availability) KTL with zinc phosphating plus powder coating, maximum corrosion protection Hot-dip galvanising (optional) Ex works pricing Important: Photos show optional extras Get in touch for advice and a free, no-obligation quote. Leasing, financing, or hire purchase options possible! We cater to your requirements. Contact us for a tailored offer. Errors and prior sale excepted.

Stanje: novo, največja dovoljena obremenitev: 32.480 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 800 mm, skupna širina: 2.480 mm, skupna višina: 800 mm, Leto izdelave: 2026, Oprema: ABS, PRSSQPLTri 27 -13.6, 3-axle semi-trailer chassis with 27 mm cross-laid phenolic resin-coated plywood floor. Tyres: 385/65 R 22.5". Mechanical steering system with one tie rod for steering a single axle Brand: Tridec Maximum steering angle: 28° Maximum king pin load approx. 12,000 kg Landing gear position approx. 2,300 mm from king pin Chassis length approx. 13,620 mm Chassis width approx. 2,480 mm Permissible axle load: 24,000 kg (technical axle load: 27,000 kg) Ride height: unladen approx. 1,300 mm with a coupling height of 1,150 mm Bjdpfx Anog Dkzco Iodc COC documents Chassis made from welded longitudinal beams and inserted crossmembers Outer frame height approx. 125 mm, with groove for lashing rings, base thickness approx. 4 mm 13 pairs of lashing rings (shackles) bolted into the outer frame with groove, compliant with EU standards (certified lashing capacity 5t per lashing point) 24-ton telescopic landing gear from a premium brand (Jost/SAF) Axles from premium brand (SAF/BPW/JOST) 9-ton axle with 22.5" large disc brakes First axle liftable, automatic function, with starting aid EBS brake system, brand: Knorr or Wabco Air line connectors, red and yellow coupling heads Lift and lowering device with one rotary valve, Knorr/Wabco Tyre pressure monitoring Lighting system: 24 Volt LED 15-pin plug at the front Flashing SML (side marker lights) Premium tyres 385/65 R 22.5 Superstructure Sideboards in anodised finish, height approx. 800 mm (2x4) Rear tailboard with integrated folding step Reinforced sideboards with tie rod sideboard Front wall approx. 1,200 mm high, with sheet metal cladding, bolted design Option: Superstructure certificate DIN EN 12642 XL Conspicuity markings for platform vehicles Cross-laid phenolic resin-coated floor, 27 mm Floor: Certificate for tested forklift axle load 9.0t according to DIN EN 283 Rear lamp panel premium, large and pressed Underrun protection in welded design (rectangular tube) Two wheel chocks with holders, plastic or galvanised Plastic mudguards Side underrun protection on both sides, aluminium or plastic profile Chassis painted in RAL 9005 or Nova grey 7350, other colours available for an additional charge (subject to powder colour availability) KTL (cathodic dip coating) with zinc phosphating plus powder coating, for highest corrosion protection Hot-dip galvanization (optional) COC documents Price ex works Attention!!! Pictures show optional equipment Get in touch for a consultation and receive a free, no-obligation quotation. Leasing, financing or hire purchase available! We can meet your individual requirements. Contact us— we’d be happy to prepare a quote for you. Subject to errors and prior sale!

Stanje: novo, največja dovoljena obremenitev: 14.050 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 800 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, PRASQ 18 Turntable Trailer with Drop Sides Chassis made from welded longitudinal beams and through-bolted cross members Spring center approx. 1300 mm Permissible total weight approx. 18,000 kg Coupling height (center) approx. 800 mm unladen Front overhang approx. 710 mm (measure from headboard to center of front axle) Rear overhang approx. 950 mm (center of axle to rear edge of headboard) Chassis length approx. 6000 – 8000 mm (headboard to headboard) Chassis width approx. 2480 mm (loading width), overall width approx. 2550 mm Ride height unladen approx. 1300 mm (top edge of floor) Outer frame height: Height approx. 125 mm, t = 4 mm with outer bevel and lashing holes every 200 mm, without lashing rings Forklift impact protection as flat bar left and right on the outer frame Drawbar: 18t rigid drawbar, brand at our discretion Distance from center of towing eye to front edge of headboard as per customer specification Bodpfeg Dkx Nex An Iedc Towing eye ø 40 mm (50 mm optionally available) Axles: Branded make (SAF/BPW/JOST) 9t, 22.5" with large disc brakes, without lift and lower function (total lift approx. 200 mm) Brakes: EBS braking system by Knorr or Wabco Air connectors: red and yellow coupling heads Tire pressure monitoring Tires: Premium tires 385/65 R 22.5, brand at our discretion Wheel 11.75 x 22.5 Body: Drop sides in anodized finish, height approx. 800 mm Rear drop side with two internal folding steps Front wall approx. 1200 mm high, with sheet metal cladding, bolted on Floor: 27 mm transverse phenolic plywood floor Certified for forklift axle load of 7.2t according to DIN EN 283 (9t optionally available) Lighting system: LED lighting system 15-pin plug Flashing SML Attachments: 180° half-shell mudguards Aluminum or plastic side underrun protection on both sides One plastic wheel chock with bracket Coating/Paintwork Vehicle: Chassis painted in RAL 9005 or Novagrau 7350 Other colors available at extra cost (only if powder color is available) KTL with zinc phosphating plus powder coating, highest corrosion protection Hot-dip galvanizing (optional) Price ex works Attention!!! Photos show special equipment Get expert advice and a free, non-binding quote. Leasing, financing, and hire purchase available! We can meet your specific requirements! Contact us – we will be happy to provide you with a quote. Subject to errors and prior sale.

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.540 mm, skupna širina: 2.540 mm, Leto izdelave: 2026, Oprema: ABS, WEB TRAILER PRSH 27 PLATFORM with Hardwood Floor Dimensions: Chassis width approx. 2,480 mm Chassis length approx. 13,620 mm Wheelbase approx. 7,700 mm Landing gear position approx. 2,300 mm from kingpin (for 2-axle tractors only) Driving height: 1,280 mm with 1,150 mm fifth wheel height Spring center approx. 1,300 mm Fifth wheel load max. approx. 12,000 kg Axle loads: 24,000 kg Approval: CoC documents available Chassis: Chassis made of welded longitudinal beams and through-bolted cross members Outer frame height approx. 125 mm, 4 mm with groove for lashing rings 13 pairs of lashing rings (brackets) screwed into the grooves in the outer frame, each rated at 5t!! Landing Gear: Bodeg Dkx Eopfx An Iedc 24 t telescopic landing legs from brand manufacturer (Jost/SAF) Axles: Brand manufacturer (SAF/BPW/JOST) 9 t 22.5" large disc brakes, total stroke approx. 180 mm No axle lift (option) Axle spacing approx. 1,310/1,310 mm Brakes: EBS braking system by Knorr or Wabco Air connections with red and yellow coupling heads Lifting and lowering device with 1 rotary slide valve (Knorr/Wabco) Air tanks 2 x approx. 80 l Tire pressure monitoring Lighting system: LED 15-pin front connection Flashing side marker lights Tyres: Premium brand tyres 385/65 R 22.5 on steel rims Bodywork: Steel front wall approx. 1,200 mm high, with sheet metal cladding, bolted construction Floor: Weatherproof 28 mm hardwood floor alternately with galvanized omega steel profiles Hardwood planks bolted onto cross-members (optional double bolting) Floor: Certificate for tested forklift axle load 9.0t according to DIN EN 283 Attachments: Premium, large, and edged rear lamp bracket Welded underrun protection (rectangular tubing) Rear access ladder, right side, foldable and extendable with platform Two wheel chocks with holders, plastic or galvanized Plastic mudguards 180° over each axle Side underrun protection on both sides — aluminum or plastic profile Coating: Chassis painted in RAL 9005 or Novagrey 7350 Other colors at extra cost (subject to powder availability) KTL coating with zinc phosphating plus powder, highest corrosion protection Hot-dip galvanizing (optional) Ex-works price Attention!!! Pictures show special equipment. Get professional advice and a free, non-binding offer. Leasing, financing, or hire purchase available! We can accommodate your requirements! Contact us—we will gladly provide you with an offer. Subject to prior sale and errors!

Stanje: novo, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.850 mm, skupna širina: 2.480 mm, skupna višina: 4.000 mm, Leto izdelave: 2026, Oprema: ABS, WEB Trailer PRASQ18 SYS 7.5 Trailer with Body, Twin 17.5" wheels including multilayer plywood floor Dimensions: Length as per customer specification in 100mm increments (optionally in 50mm increments) Curtainsider body side height 2,850 mm from loading platform to lower edge of outer sill (other heights available on request) Bdsdpfxsg Dkxwe An Ioc Width: 2,480 mm or 2,540 mm Coupling height according to customer specification Driving height / loading height unladen approx. 1,030 mm (top edge of floor) Spring center approx. 1,100 mm Axle loads: 18,000 kg (2 x 9,000 kg) Approval: COC (Certificate of Conformity) papers Chassis: Chassis construction made from welded longitudinal beams and through-inserted cross members Cross member spacing IPE 80 approx. 400–500 mm Outer frame height approx. 125 mm (t=4), with groove and 7 pairs of lashing eyes (5t) Turntable with 90mm-high ball race (low-maintenance) Drawbar: 18t rigid drawbar, one-sided height adjustment Drawbar eye Ø 40 mm (50mm eye optional) Axles: Brand-name (SAF/BPW/JOST) 9t 17.5" drum brakes Brakes: EBS brake system by Knorr or Wabco Air connections: coupling heads (red and yellow) Lifting and lowering device with two rotary slide valves (Knorr/Wabco) Tire pressure monitoring Tyres: Branded 235/75 R 17.5 tires on steel rims Body: Body certificate in accordance with DIN EN 12642 XL Contour marking, ECE plates, rear doors with steel sandwich panels and four internal vertical locking bars, sliding roof, 90° front wall, steel cassettes, internal wear plates over full height 3 rows of wooden slats Sliding curtain PVC 12x12, 880g, Reinforced roof tarpaulin, 12x12 roof weave Tension ratchets at front and rear Lighting system: 24 Volt with LED 15-pin plug Flashing side marker lights Floor: 27 mm transverse phenolic plywood floor Certified forklift axle load 7.2t according to DIN EN 283 (9t optional) Attached parts: Access ladder with platform at rear right Plastic mudguards, 180 degrees Spray suppression mud flaps One wheel chock with holder 2 rubber bumpers at rear corners Side underride protection, aluminium or plastic profile on both sides Coating: Chassis painted in RAL 9005 or Novagrau 7350 Other colours available at extra charge (subject to powder colour availability) KTL with zinc phosphating plus powder coating, maximum corrosion protection Hot-dip galvanization (optional) Ex works price Note!!! Images show special equipment Get expert advice and receive a free, no-obligation quotation. Leasing, financing, or hire purchase available! We can adapt to your requirements! Contact us – we are happy to provide you with an offer. Subject to errors and prior sale!!!