Berger Kraus Mini Kolesni Nakladalnik Z Nizkim Nakladalnikom + Zimski Paket nakup rabljenega (27.582)

Stanje: rabljeno, največja dovoljena obremenitev: 75.700 kg, skupna masa: 93.200 kg, konfiguracija osi: 3 osi, prva registracija: 06/2008, dolžina tovornega prostora: 8.700 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 885 mm, velikost pnevmatike: 245/70 R17.5, barva: bež, Leto izdelave: 2008, Gooseneck, rigid, in central beam design: - Loading area: 3,700 mm x 2,480 mm - Beveled 10°, front corners 45° (1,080 mm long, 190 mm high bevel at the end of the gooseneck) - Closed outer frame - Max. fifth wheel load: 26,000 kg - Swing radius: 2,700 mm - 2" kingpin - Wooden floor - Hydraulically operated landing legs - One-piece aluminum drop sides, 400 mm high, closed on 3 sides including rear tailboard, stakes foldable and removable - 2 pairs of lashing points LC 8,000 daN Loading area: - Single telescoping, continuous over chassis - External/internal tube construction with 1,090 mm fixed loading platform section at front - (L x W): 8,700 mm x 2,550 mm, extendable by 6,700 mm to max. 15,400 mm - Steel floor covering - Locking of extension stages via spring-loaded cylinders and conical bolts - Vehicle optimized for maximum extension - 7 pairs of lashing points LC 13,000 daN - 6 pairs of lashing points LC 6,000 daN - 6 pairs of stake pockets 100 x 50 mm (LC 2,000 daN) 6-axle running gear: - 1 rigid axle, 5 forced-steering axles - Axle brand: SAF - Chassis width: 2,550 mm - 1st axle: load-dependent lift axle - 2nd axle: manually liftable (not load-dependent) - Wheelbase, starting from first axle: 1,310 mm - Twin tires 245/70 R 17.5 Duodpfxoxp U Tze Al Het - Air suspension, 200 mm lift - Ride height: 885 mm +100 mm / -100 mm - 2nd ride height: 845 mm +140 mm / -60 mm - Floor covering: steel / wood Vehicle rear: - "Beveled" design (600 mm long, 10° bevel) - 1,000 mm overhang from center of last axle - Ramp eye detachable at the rear cross member - Mechanical support for stowage during loading - 1 pair of lashing points LC 6,000 daN - 1 pair of lashing points LC 13,000 daN Loading ramps: - Two-piece loading ramps, length 2,850 mm + 1,540 mm, width 720 mm - Hydraulic ramp lifting mechanism - SuperGrip rubber surface - Climbing strips on outside of ramps 20 mm x 20 mm x 100 mm - Laterally adjustable by hydraulic cylinder to maximum external width of 2,790 mm or minimum internal spacing of 480 mm - Integrated mechanical lock in ram lift cylinder for securing in transport position - Mounting bracket for beacon light Hydraulics: - Hydraulic coupling for tractor unit (1 set), connectors for tractor, hydraulic pump on tractor unit with maximum 60 l/min delivery rate - Hydraulic hand emergency pump - Electric-hydraulic power pack Rear steering: - Rear steering bottle for manual steering of trailer axles by cable remote control, spiral cable extendable from 1.5 m to 5 m Accessories included: - Spare wheel holder at front of gooseneck, pluggable, galvanized - Mounting bracket for stakes on gooseneck - 2 pairs warning signs, approx. 423 mm x 423 mm - Widening kit incl. widening beams, hook-on widening element at vehicle rear - 1 pair wheel chocks incl. holder - 1 spare wheel - Central lubrication system with 2 grease pumps - Single-color paint finish in RAL-1001 beige

Stanje: novo, lastna masa: 9.400 kg, največja dovoljena obremenitev: 39.600 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 9.400 kg, Oprema: ABS, Chassis: - Robust welded steel frame construction with a front frame depression and flat loading platform, rear taper approx. 500x100 mm - Gooseneck height 200 mm with beveled corners at the front - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear bevel) - 2 king pin positions with replaceable 2" king pin - Outer frame closed outward, punch-hole design - Loading platform with extendable central frame, can be extended approx. 2,000 mm in increments of 500 mm, pneumatically lockable - Step 80x80 mm in the frame before and after the division - Reinforced frame version / point load in retracted position at center of gravity - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle to vehicle end - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection = extended rear plate - Drop leg supports at the rear Ramps: - 2 single-piece aluminum ramps, special version with spring-assisted lifting - Length x width approx. 2,500 mm x 600 mm - Lockable in transit position with lashing straps - Manually adjustable sideways Axles, Steering and Tyres: - BPW air suspension axles, each with 10 t axle load, airbag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lifting and lowering device with a total lift of approx. 200 mm - 2nd ride height via ball valve +50 mm - 1st axle as lift axle (wired via EBS), fully automatic activation with manual emergency actuation via button on semi-trailer - 3rd axle as self-steering trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center-offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Tyre pressure monitoring included Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gear: - Mechanical 24 t landing gear with single-side operation and compensating support Paintwork: - Steel grit-blasted, spray-galvanized chassis and primed - Chassis/wheel hubs/outer frame painted in DB 7350 Novagrey - Reflective side and rear stripes in yellow Accessories: - Plug-in side and rear panels on gooseneck, approx. 400 mm high - Spare wheel holder - Lateral aluminum underrun protection - 4 chocks with holders - Elongated license plate holder in rear plate - 1 ECE panel at the rear, plug-in - 11 pairs ZK modules 10t, side-mounted: Dusdpsxnym Djfx Al Het - 2x on gooseneck - 2x on loading platform before extension - 7x after extension - Extendable warning signs incl. 3 position lights each, at front landing gear and before rear plate, infinitely extendable up to load width 4,500 mm - 4 holders for warning signs, plug-in to stake pockets on loading platform - 6 pairs of lateral stake pockets for 100x50 mm plug-in stakes - 2 cross rows of stake pockets for 100x50 mm plug-in stakes on gooseneck from outer frame inwards to main frame (1x before and 1x after king pin positions) - 3 cross rows of stake pockets for 100x50 mm plug-in stakes on loading platform from outer frame inwards to main frame (1x before extension, 1x after extension and 1x after 3rd axle) - 2 pairs of steel plates in loading platform for container locks to accommodate 1x 20ft container - Rubber apron mounted to underrun protection

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 478 kg, največja dovoljena obremenitev: 1.322 kg, skupna masa: 1.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.960 mm, širina tovornega prostora: 1.520 mm, višina nakladalnega prostora: 250 mm, velikost pnevmatike: 195/50R13C, Temared Builder 2615S - Construction machinery transporter, single axle with mesh ramp Dusdpswigzgefx Al Hst - New vehicle Technical Data: * Gross vehicle weight: 1,800 kg – tandem axle * Unladen weight: approx. 478 kg * Payload: approx. 1,322 kg * Internal box dimensions: 260 x 152 x 25 cm * Overall dimensions: 460 x 214 x 164 cm (LxWxH) * Tyres: 195/50R13C * Loading height: approx. 40 cm Features and Build: * Welded and hot-dip galvanized frame and platform frame * Standard excavator bucket rest on drawbar * V-drawbar, support wheel standard * Overrun brake with auto-reverse, handbrake * Maintenance-free rubber suspension axles * Solid welded steel side walls * Walkable side panels along full box length with integrated hole pattern * Anti-slip phenolic plywood floor * 6 sliding lashing brackets integrated in floor frame, on the sides * Continuous mesh ramp with lift assist, approx. 150 cm > NEW: Gas strut assist * Integrated ramp support * 12V electrics, 13-pin plug, reversing light * Multi-function lights mounted protected in side carrier * Additional lights mounted protected in front carrier Incl. German vehicle registration certificate and COC Optional Accessories: * Spare wheel * Lashing straps * Anti-theft device * etc. (please enquire) ! Many more trailers at >>> trelex.de ! * See there: many more trailers * Financing and trade-in possible! * Huge selection: Over 200 trailers always in stock, visit us! * Competent and fair advice, quick processing. * Questions? Just call!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MC 205 133 750 1 D, lastna masa: 204 kg, največja dovoljena obremenitev: 546 kg, skupna masa: 750 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.050 mm, širina tovornega prostora: 1.330 mm, višina nakladalnega prostora: 500 mm, Installed accessories - Two roof racks with a distributed load capacity of 150 kg. Side panels, railing, and more - Foldable and removable tailgate - With durable, premium corrosion protection - Double-walled, anodized aluminum side panels - Equipped with robust cam locks - Fixed front wall - Stable, long-life hinges Lid - Aluminum lid with durable fiberglass-reinforced plastic (GRP) panel - Splash-proof - Lid with gas strut-assisted lifting aid - Lockable lid - Two robust roof carriers with a distributed load capacity of 150 kg - Installation of bicycle racks possible Chassis and frame - Fully supported floor - Square tube drawbar Dodpfxstrha Es Al Hout - Tow ball coupling with safety indicator Loading area and floor - Continuous, non-slip, waterproof phenolic resin-coated plywood floor - 15 mm thick - Finnish birch multiplex Lighting - Modern multifunctional lighting - With reversing light - With rear fog light - With two clearance lights - 13-pin plug Wheels and axles - Robust rubber torsion axle - With automatic reverse function - Maintenance-free compact wheel bearings - Plastic mudguards - Wheel chocks with holder Lashing and securing options - 6 recessed lashing points, 400 daN Documents and freight costs - Freight costs to us already included - Incl. vehicle registration document (Part 2) - Incl. COC document (EC certificate of conformity) - No further unwanted costs - Down-rating possible for a surcharge (TÜV fee only) Further offers and information can be found on our homepage. I am not allowed to link it directly, so simply search for "Dapper Anhänger" in your search engine. Photos may show optional equipment. Errors, changes, and prior sale reserved.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MP 255 153 1500 1, lastna masa: 285 kg, največja dovoljena obremenitev: 1.215 kg, skupna masa: 1.500 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.550 mm, širina tovornega prostora: 1.530 mm, višina nakladalnega prostora: 430 mm, Drop side, railing, and more - Folding and removable anodised aluminium tailgate - Robust double-action latches - 30 cm high anodised drop sides - Railing made from hot-dip galvanised steel, riveted (total height 43 cm) - Easy cleaning thanks to an intelligent drop side profile Chassis and frame - Fully supported floor - V-drawbar - Coupling hitch with safety indicator - Automatic jockey wheel Loading platform and floor - Continuous, anti-slip and waterproof phenolic plywood floor - 15 mm thick - Finnish birch plywood Lighting equipment - Modern multifunction lighting system - With reversing light - With rear fog lamp - 13-pin plug Wheels and axles - Robust rubber suspension axle - With automatic reversing system - Maintenance-free compact wheel bearings - Plastic mudguards Dsdpfx Alep N Txro Hjut - Wheel chocks with holder Lashing and securing options - 6 recessed lashing points, 400 daN Documentation and freight costs - Freight costs to us already included - Including vehicle registration document (Part II) - Including CoC document (EC Certificate of Conformity) - No further unwanted costs - Downrating possible for an extra charge (TÜV fee only) You can find further offers and information on our website. As I am not allowed to provide a direct link, simply enter "Dapper Anhänger" in your search engine. Photos may display optional accessories. Errors, amendments, and prior sale excepted.

Stanje: novo, številka stroja/vozila: MP 255 133 1350 1, lastna masa: 235 kg, največja dovoljena obremenitev: 1.115 kg, skupna masa: 1.350 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.550 mm, širina tovornega prostora: 1.330 mm, višina nakladalnega prostora: 430 mm, Side Walls, Railings, and More - 30 cm high double-walled anodized side panels - Foldable and removable anodized aluminum tailgate - Heavy-duty double-action latches - Railing made of hot-dip galvanized steel (total height 43 cm) - Easy cleaning thanks to intelligent side panel profile Chassis and Frame - Fully supported floor - Square tube drawbar - Ball hitch with safety indicator - Jockey wheel with reinforced clamp Loading Platform and Floor - Continuous, slip-resistant, and waterproof phenolic plywood floor - 15 mm thick - Finnish birch plywood Lighting Equipment - Modern multifunctional lighting system - With reversing light - With rear fog lamp - With two marker lights - 13-pin plug Wheels and Axles - Robust rubber suspension axle - With automatic reversing mechanism - Maintenance-free compact wheel bearings - Plastic mudguards - Wheel chocks with holders Lashing and Securing Options - 6 recessed lashing points, 400 daN Documents and Freight Costs - Freight costs to us already included - Vehicle registration document (Part II) included - COC document (EC Certificate of Conformity) included - No additional unwanted costs - Downrating possible for an extra fee (TÜV fee only) You can find more offers and information on our homepage. Since I am not allowed to link directly, simply search for "Dapper Anhänger" in your search engine of choice. Dsdpfxjp R S Ews Al Hjut Photos may show optional accessories. Errors, changes, and prior sale excepted.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MC 255 133 1350 1 D, lastna masa: 282 kg, največja dovoljena obremenitev: 1.068 kg, skupna masa: 1.350 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.550 mm, širina tovornega prostora: 1.330 mm, višina nakladalnega prostora: 500 mm, Installed Accessories - Two roof racks, each with a load capacity of 150 kg (distributed). Side Panels, Railings, and More - 35 cm high double-walled anodized side panels - Foldable and removable anodized aluminum rear panel - Robust double-action latches - Fixed front panel - Sturdy and durable hinges - Easy cleaning thanks to intelligent side panel profile Lid - Aluminum lid with durable fiberglass-reinforced plastic (GRP) cover - Splash-proof - Lid with gas strut-assisted lifting aid - Lockable lid Dujdpfxep Nzkws Al Hjt - Two sturdy roof racks with 150 kg load capacity (distributed) - Option to mount bicycle racks Chassis and Frame - Fully supported floor - Square tube drawbar - Ball coupling with safety indicator - Jockey wheel with reinforced clamping bracket Loading Area and Flooring - Continuous, slip-resistant, and waterproof phenolic plywood floor - 15 mm thick - Finnish birch multiplex Lighting Equipment - Modern multifunctional lighting - With reversing light - With rear fog light - With two clearance lights - 13-pin plug Wheels and Axles - Robust rubber suspension axle - With automatic reversing system - Maintenance-free compact wheel bearings - Plastic mudguards - Wheel chocks with holders Lashing and Securing Options - 6 retractable tie-down points, 400 daN Documents and Freight Costs - Delivery costs to us already included - Includes vehicle registration certificate (Part II) - Includes COC document (EU Certificate of Conformity) - No additional unwanted costs - Load reduction possible for an additional fee (TÜV fee only) You can find more offers and information on our homepage. As I am not permitted to link directly, simply enter "Dapper Anhänger" into your search engine. Photos may show optional accessories. Errors, changes, and interim sales excepted.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MP 305 153 1500 1, lastna masa: 305 kg, največja dovoljena obremenitev: 1.195 kg, skupna masa: 1.500 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 3.050 mm, širina tovornega prostora: 1.530 mm, višina nakladalnega prostora: 430 mm, Side Walls, Railing, and More - 30 cm high, double-walled, anodised side panels - Fold-down and removable anodised aluminium tailgate - Robust double-action fasteners - Railing made of hot-dip galvanised steel (total height 43 cm) - Easy cleaning thanks to intelligent side wall profile Chassis and Frame - Fully supported floor - V-drawbar - Trailer hitch coupling with safety indicator - Automatic jockey wheel Loading Area and Floor - Continuous, anti-slip, waterproof phenolic resin-coated plywood floor - 15 mm thick - Finnish birch plywood Lighting Equipment - Modern multifunctional lighting - With reversing light - With rear fog light - With two marker lights - 13-pin plug Wheels and Axles - Robust rubber spring axle - With reverse automatic mechanism - Maintenance-free compact wheel bearings - Plastic mudguards - Chocks with holder Lashing and Securing Options - 6 recessed lashing points, 400 daN Dujdpfxsp R Ul Rs Al Hst Documents and Freight Costs - Freight costs to us already included - Incl. registration certificate (part II) - Incl. COC document (EC certificate of conformity) - No further unexpected costs - Load reduction possible at extra cost (TÜV fee only) You can find more offers and information on our homepage. Direct linking is not permitted; simply search for "Dapper Anhänger" in your search engine. Photos may show optional equipment. Errors, changes, and prior sale reserved.

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, moč: 18,2 kW (24,75 KM), vrsta prenosa: hidrostat, vrsta goriva: dizel, barva: rumena, skupna masa: 2.300 kg, dvižna moč: 900 kg/m, dvižna višina: 2.100 mm, velikost pnevmatike: 31x15.5-15, stanje pnevmatik: 100 odstotek, stanje pogona: 100 odstotek, konfiguracija osi: 2 osi, število sedežev: 1, tip droga: simpleks, širina izkopne žlice: 1.500 mm, obratovalne ure: 1 h, Oprema: 4-v-1 lopata, dodatne luči, hidravlika, hidravlika prijemala, hidravlično kladivo, kabina, spojka prikolice, standardna žlica, vilice za palete, For sale is a Berger Kraus BK810 wheel loader/farm loader with Kubota engine, offered as a complete package with 3-axle low-loader trailer and fork/bucket set! Key features: - Quick coupler operated via joystick - Suspension seat Duodpfowcrgzox Al Hot - EURO tool carrier - Float position (floating function) - 2-speed automatic transmission - Differential lock - Reversing camera - 3rd & 4th hydraulic control circuits We offer financing for commercial customers, spare parts procurement, and reliable service! Private buyers welcome! Technical specifications (loader): - Engine: Kubota V1505-EF1 - Power: 18.2 kW / 2300 rpm / 1500cc - Operating weight: approx. 2300 kg - Lifting capacity: approx. 900 kg - Dumping height: approx. 2100 mm - Hydraulic pump output: 45 l/min - Italian PWG hydraulic system - Double pump (piston drive up to 66 l/min, gear drive up to 42 l/min) - Digital display - Hydrostatic drive - Telescopic arm - 3rd & 4th hydraulic control circuits - Electric joystick - Reversing camera - Hydraulic quick coupler - Dimensions (L/W/H, with bucket & cab): approx. 4450x1600x2350 mm - Beacon - Tyres: 31x15.5-15 - Roof-mounted radio with speakers - Float function - Differential lock - Parallel lift to approx. 1.6 m lifting height - Cabin heater - Adjustable steering wheel - Adjustable driver’s seat - Suspension seat - Brake booster - Hydraulic brake - 2-speed automatic transmission - Fan - Fire extinguisher - Automatic gear selection in maneuvering mode Technical specifications (trailer): - Load area (LxW): 4000x1820 mm - Permitted gross weight: 3500 kg - Unladen weight: approx. 817 kg - Payload: approx. 2683 kg - Overrun device by Knott - Axles with brake system by Knott - LED marker lights - LED outline lights - Hot-dip galvanized loading ramp with support brackets - Anti-slip floor, incl. tie-down rings - Axle loads per axle 1/2/3: 1350/1350/1350 kg - Shock absorbers on all 3 axles, rated for 100 km/h - Support load: 150 kg - Tyres: 195/50R13C - Wheel chocks - Support wheel with folding function Accessory package: - Fork set: EURO mount - Standard bucket: EURO mount Of course, you can also customize your accessory package according to your needs and requirements. Simply contact us for a tailored solution! As a licensed Berger Kraus and Martz partner, we are your contact if you need spare parts or additional attachments, or if you have any questions and requests regarding your new machine. All information provided without guarantee. Subject to errors and change.

Stanje: novo, največja dovoljena obremenitev: 2.600 kg, skupna masa: 3.500 kg, Leto izdelave: 2025, Buy online at trailer-shop.de At ANHÄNGERWIRTZ, many models are available online Easily purchase online 24/7 Pick up yourself or have it delivered 😊 The online pick-up marketplace for your new trailer offers top brands! Dsdpsx E T T Isfx Al Hout Over 850 new trailers in stock Over 130 used trailers constantly available Non-binding example: Many versions available immediately Martz Machinery Transport Trailer Builder XL pro+ rk Loading area: 400x181x30 cm, Gross Vehicle Weight: 3,500 kg Tri-axle, V-drawbar, galvanized steel side panels, mesh floor on grid frame, 6 lash-down rings (each 250 daN) on load floor, shovel holder, ventilated ramp door with support, automatic jockey wheel, 13-pin connector.... Invoice with VAT shown – trailer dealer for over 34 years Order by phone during our business hours (Monday to Friday) or 24/7 through our online shop at trailer-shop.de Copyright – Trademark protection 12.25 Article no.: BUILDER3500MA4003PRO+AK

Stanje: rabljeno, lastna masa: 12.450 kg, največja dovoljena obremenitev: 32.550 kg, skupna masa: 45.000 kg, prva registracija: 11/2008, dolžina tovornega prostora: 9.730 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, barva: oranžna, obratovalna teža: 12.450 kg, Very well-maintained vehicle from first owner Meusburger MTS 3 - 45T Three-axle low-bed trailer with drive-over loading ramps Heavy-duty transport Model MTS 3 Gross vehicle weight - 45,000 kg Payload - 32,550 kg Length - 13,900 mm Djdpewb Sh Asfx Al Heut Width - 2,500 mm Air suspension

Stanje: novo, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5 3PMSF, barva: siv, Oprema: ABS, Swan neck: - Swan neck with front corners beveled at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Extendable load area: - Extendable load area with rear chamfer approx. 1,000 mm x 8° - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the load area (LC 10,000 daN) - Cut-outs in the external frame of the load area for attaching lashing straps (LC 2,000 daN) - Approx. 48 mm hardwood flooring, over the axles with checker plate covering Axles and Tires: - BPW axles and suspension, 2 fixed axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated by reverse gear or manually - Air suspension with lifting and lowering valve - Axle tools - 235/75 R 17.5 tires, 3PMSF Braking system: - WABCO braking system as per EU regulations with EBS-E (2S2M) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Accessories included: - One spare wheel with holder in front of the front wall - 2'' king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection rail - 4 wheel chocks with holder at the front wall - Rear light bracket at the rear of the trailer - Mounting points at the rear area of the swan neck for ALU loading ramps - Galvanized folding supports under the chamfer of the load area - Cover plates to bridge the gap between ramps and load area - White reflective tape according to EU standards on the sides, red at the extension and rear - Electro-hydraulic unit at the rear, under the load area - Bracket for warning panels left and right on the swan neck and ramps, including power socket - Ramp control valves mounted on the right-hand side of the trailer - One mud flap at the rear of the trailer - Manual and documentation on USB stick - On the swan neck aluminum side walls and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable (body length approx. 2,560 mm) - Four warning panels extendable by approx. 400 mm, size approx. 423 x 423 mm, with position light - 3 pairs of WADER container pockets in the load area for a 20ft, 30ft, or 40ft container - 6 pairs of stake pockets 100x50 mm in the external frame of the load area - Galvanized extensions, extendable by approx. 230 mm per side - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the chamfered area of the load area - Anti-slip sand layer painted on the checker plate above the king pin and load area - Mounting for beacon on the warning panels - European reflective plates (red-yellow) at the rear of the trailer - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads, including load chart - HRM metallization (High Resistance Metallisation) of the external frame - Complete steel construction shot-blasted, then the defined visible surfaces finished hot-metallized with ZINACOR 850 (zinc 85% - aluminum 15%) Dedsuqlmnopfx Al Hjut

Stanje: novo, lastna masa: 12.800 kg, največja dovoljena obremenitev: 36.200 kg, skupna masa: 49.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.850 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 375 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 12.800 kg, Oprema: ABS, Gooseneck: Djdpsvy Edcefx Al Hout - Gooseneck in SNT design for optimised loading platform length, approx. 3,750 mm in length - Gooseneck can be raised/lowered hydraulically and is detachable - Technical fifth wheel load: 25,000 kg - For tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading platform: - Low-bed with external beams, designed as a telescopic vessel bridge in low-profile construction with front extension - Length 6,850 mm x width 2,540 mm - One locking position approx. every 1,000 mm on the extension Rear running gear: - Rear running gear with closed outer frame featuring checker plate cover and continuous prism excavator recess, approx. 1,250/700 x 505 mm, open at the rear Axles, suspension and tyres: - “PENDLE-AXLE”, all axles force-steered hydro-mechanically - Hose rupture valves on axle equalising cylinders with automatic reset function - Hydraulic cylinders with shut-off valves and pre-locking pins for securing in raised position - Final coat for axles with two layers of 2K acrylic paint, single-colour in “FAY-Grey-34-0260” - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres: 245/70 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 14 - TPMS sensors installed in all wheels, incl. spare wheels Included accessories: - Plug-in steel front wall, approx. 400 mm high - 3 kW electro-hydraulic unit for hydraulic operations, except for hydraulic winches - One spare wheel with mounting adapter - External beams of the gooseneck with mounting holes for bolt-on lashing rings - Plug-in ALU side walls on the gooseneck, approx. 400 mm high, anodised - One plug-in ALU rear wall on the gooseneck, approx. 400 mm high, anodised - Checker plate covering on the gooseneck - Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide - Operating area lighting at the gooseneck with on/off switch - Hydraulic traverse to support the gooseneck on the tractor or a dolly - 2" king pin - Anti-slip stickers on the left chamfer of the gooseneck - The rear upper area of the gooseneck is closed with a removable cover - 4 wheel chocks with holders - Hydraulic connections from gooseneck to low-bed with multi-coupling instead of screw couplings - 1 pair of steel ramps with climbing strips and retaining bolts for bridging the low-bed mounting hooks - The ramps can be placed over or between the hooks - Mounting option for steel drive-on ramps at the rear between the external beams of the gooseneck - Prepared for bolt-on container locks for 1 x 20ft on the external beams - Mechanical pin and lug coupling from low-bed to running gear for exchanging the loading platform or inserting extension beams - With electro-pneumatic-hydraulic couplings - The outer beams of the low-bed are coated with painted-on sand layer as anti-slip protection - Removable (galvanised) load floor, can be inserted in 3 elements between the external beams, with hardwood surface - Foldable extensions, approx. 230 mm per side - Hanging strip at the front of the rear running gear to the low-bed for loose approach ramps - 2 pairs of stake pockets recessed into the outer frame of the running gear, for plug-in stakes approx. 100 x 50 mm - Hanging strip for loose ALU approach ramps at the rear cross member of the vehicle - Central lubrication system with 2 pumps - Radio and cable remote control - 4 extendable warning signs, approx. 423 mm x 423 mm - Numerous lashing positions

Stanje: novo, lastna masa: 10.600 kg, največja dovoljena obremenitev: 39.400 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 760 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R17.5, barva: siv, obratovalna teža: 10.600 kg, Oprema: ABS, Gooseneck: - Gooseneck with 30 mm hardwood flooring - Gooseneck at rear in straight version - 3 pairs of lashing rings (LC 5,000 daN) Extendable load floor: - Load floor in extendable configuration - 5 pairs of lashing rings foldable outward - 3 pairs of lashing rings foldable outward - 1 pair of lashing rings laying at the front end of the load floor - Cut-outs in the outer frame of the load floor for attaching tension straps - Approx. 48 mm hardwood flooring, checker plate covering above the axles Landing legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: - BPW axles, two rigid axles, two self-steering axles - Air suspension with drum brakes, with lift/lower function - The self-steering axles are equipped with an electromagnetically operated reverse lock, which can be activated via reverse gear or manually - Axle tools - Tyres 205/65 R17.5 Brake system: - Brake system compliant with EU regulations with EBS-E (4S3M) Steel structure: - Steel construction made from high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system in accordance with EU regulations, lighting 24 Volt, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Paintwork: - High-quality and durable corrosion protection on the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality single-colour 2-component (2K) top coat in Novagrau - Rear section metallised and painted in RAL 9010 (Pure White) Included accessories: - One spare wheel with holder in front of the bulkhead - 2" king pin - Galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanised connection bar at the front - 4 wheel chocks with holder at the front wall - Galvanised folding supports under the load floor slope - Holder for a warning beacon at the rear of the trailer - Galvanised extensions, extendable by approx. 230 mm per side - White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear Dujdpfx Alet Ag Uwj Het - On the gooseneck and rear panel, left and right, one bracket each for warning panels including socket - European reflective markings (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system according to ECE R 141 - On the gooseneck, plug-in ALU side walls and rear wall, approx. 2,440 x 400 mm - The rear, galvanised plug-in side stanchions are removable, length of the body approx. 2,560 mm - 7 pairs of WADER container pockets - 1x 20ft container on the load floor; 1x 40ft container on the load floor; 1x 40ft container above the gooseneck; 2x 20ft container - 7 pairs of stanchion sockets for plug-in stanchions 100 x 50 mm in the outer frame of the load floor - Lift axle on the front axle with control via TEBS E, depending on the current axle load and load condition - Sliding plug-in rail for ALU loading ramps at the rear of the vehicle - Anti-slip sand finish painted on the checker plates on the gooseneck and load floor - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm, each with a position lamp - Holder for warning beacon on the warning boards - 80 km/h speed stickers at the rear and on both sides - Axle load gauge for determination of axle loads inclu

Stanje: novo, lastna masa: 7.900 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, obratovalna teža: 7.900 kg, Oprema: ABS, Swan Neck: - Swan neck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood decking Loading Area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Recess in the chamfer and encroaching into the loading area for receiving the excavator bucket stick approx. 2,900 x 750 x 210/290 mm - Cut-outs in the external frame of the loading area for attaching tension straps - Hardwood decking approx. 48 mm thick, over the axles with tread plate covering Duodpfounrapsx Al Het Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Axles and Tyres: - BPW axles and suspension, 2 axles rigid, 1 axle self-steering t- Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raising and lowering valve - TPMS tyre pressure monitoring system compliant with ECE R 141 - Tyres 235/75 R 17.5 Paintwork: - Complete steel structure blasted automatically by wheel blast machine after welding - Second blasting with corundum for optimal adherence of the coating system - Final coating: two layers of 2K top coat, solid colour in RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and coated in RAL 9010 (Pure White) - Cavity sealing with special wax Electrical System: - Electrical system according to EU standards, 24 volt ASPÖCK-NORDIK (ASS3) lighting - ASPÖCK-UNIBOX at front connection rail with sockets 2x 7-pin & 1x 15-pin Included Accessories: - Multiple lashing positions - 2" king pin - One galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on galvanized front connection rail - 4 wheel chocks with holders mounted on the front wall - Receiver at rear of swan neck for ALU loading ramps - Galvanised folding supports beneath rear chamfer of loading area - Bracket for beacon at rear of trailer - Galvanised extendable outriggers, extendable by approx. 230 mm per side - White reflector tape to EU spec at sides and rear, red at rear - Brackets for warning signs on left and right of swan neck and rear panel, including socket - ALU side boards and rear board on swan neck, removable, approx. 2,440 x 400 mm - Rear galvanised stake pockets are removable - 2 pairs WADER container pockets in loading area for 20ft container - 6 pairs stake pockets for removable stakes 100 x 50 mm in the outer frame - Adjustable hanging rail for ALU access ramps at the rear of the vehicle - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the loading area chamfer - Sand-finish anti-slip coating painted onto the tread plate on swan neck and loading area - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm with position light - Bracket for beacon fitted to warning boards - 80 km/h speed sticker rear and on both sides - European reflective signs (Red-Yellow) at the rear of trailer - Manual and operating instructions on USB stick - HRM metallisation (High Resistance Metallisation) of the external frame - Complete steel structure shot-blasted, then specified visible surfaces metallised with ZINACOR 850 (Zinc 85% - Alu 15%) hot-finished

Stanje: novo, skupna masa: 3.500 kg, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.200 mm, Leto izdelave: 2025, TRAILERWIRTZ, your online pick-up market for new trailers, offers leading brand models! Over 850 new trailers available from stock Over 130 used trailers constantly on offer from trailershop Dsdoxauzaopfx Al Hjut Non-binding example: Cargo Roadster 2000 550x220x204cm Poly Black Car Edition Pullman 3500kg Fully Equipped Box trailer Car go boxx Roadster 2000, 530x220x204cm interior, 3500kg Pullman II tandem V chassis suitable for 100 km/h, low-profile tires 195/50 R13, aerodynamically shaped black polyester front and roof elements, aluminium floor and rear ramp with lifting aid and ASR folding ramps, lockable ventilation flap, aluminium side panels and service doors on right and left lockable, LED interior lights switchable, lashing rings, third brake light, perforated loading rails 200cm loading width, spare wheel, automatic jockey wheel Don't wait—available while stocks last! Sales and telephone order service hours: MON. - FRI. 8:00 am to 12:30 pm & 2:00 pm to 6:00 pm Or order 24/7 via our online shop at trailershop Content and images subject to copyright – logo trademarks 09/25 Image and all details non-binding Article No.: ROADSTER2000POLYBLKCARSW

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 2.600 kg, skupna masa: 10.000 kg, naslednji pregled (TÜV): 10/2024, Leto izdelave: 1995, Oprema: spojka prikolice, adjustable trailer hitch new tires Duedpetq Sdlsfx Al Hst Inspections can be arranged at any time by appointment at our premises in 48465 Schüttorf.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: YA9TL510050113953, lastna masa: 27.720 kg, največja dovoljena obremenitev: 70.000 kg, skupna masa: 100.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2005, naslednji pregled (TÜV): 12/2026, dolžina tovornega prostora: 14.200 mm, širina tovornega prostora: 3.250 mm, skupna dolžina: 23.950 mm, skupna širina: 3.250 mm, skupna višina: 1.050 mm, vzmetenje: hidravlika, barva: modra, Leto izdelave: 2005, število osi: 7, Naprodaj je nizkopodni priklopnik Faymonville. Število osi 2+5 = 7 Vedno vzdrževan v lastni delavnici in je v VRHUNSKEM stanju. Priklopnik je bil uporabljen izključno za prevoze v EU – baltske države, Nemčijo in okolico. Približno 1-2 krat na tri mesece. Duodjx Afbvjpfx Al Hst Nizkopodni priklopnik se nahaja v Latviji, 3405 Liepaja! Podrobnosti po slikah!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 450 kg, največja dovoljena obremenitev: 3.050 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.000 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 300 mm, In stock and immediately available: Henra Low Loader BA353015 Technical specifications: - Tandem axle - Loading dimensions LxWxH: 300x150x30 cm - Permissible total weight: 3,500 kg - Payload: approx. 3,050 kg - Fully welded and fully galvanized chassis - Aluminium side walls - Removable front mesh panel, 54 cm - Net hooks on frame - 14-inch tires - 13-pin connector - Heavy-duty support leg holders - 3 pallet spaces - Registration documents Price: €2,900.00 plus VAT Multiple units available Location: 58640 Iserlohn Duedpfx Aex An Nvjl Hst - Financing or leasing available - Nationwide delivery possible - Delivery ex stock Iserlohn - Vehicle registration documents can be sent in advance upon request senecar – your Henra dealer for southern Westphalia, the Sauerland, and eastern Ruhr area! Interim sale and errors in this offer are expressly reserved. Only the agreements in the order confirmation or in the purchase contract are binding. The exact equipment details and sales price can be obtained from our sales staff. Please contact us.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 280 kg, največja dovoljena obremenitev: 1.020 kg, skupna masa: 1.300 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.580 mm, širina tovornega prostora: 1.280 mm, višina nakladalnega prostora: 870 mm, velikost pnevmatike: 14 Zoll, *NEW VEHICLE* Brenderup 2260AB1300 400 mm side wall height 1300 kg permissible total weight 280 kg unladen weight 1020 kg payload Internal box dimensions 2580x1280x870 mm Overall dimensions 4054x1780x1405 mm Loading height 535 mm Single axle 14-inch tyres Braked Reinforced aluminium side walls Front and rear side walls can be folded down Jockey wheel 6 internal lashing points 4 external lashing hooks Anti-slip wooden floor Mesh extension 470 mm Trade-in: We are happy to take your trailer in part exchange. Please contact us or send us photos and vehicle data. Delivery: Delivery is available upon advance payment. The price per kilometre (distance Bielefeld to your destination) is €1.60 incl. VAT. We also offer the following services: -Service -Workshop -Technical inspections (TÜV) Dedsw Nh H Nopfx Al Heut -Tyres and wheels -Tarpaulins and frames -Custom fabrication in our metalworking shop -Rental Always approx. 400 trailers in stock! We look forward to your visit. Office, workshop, technical inspections, spare parts, rental, and showroom Senner Hellweg 187

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 340 kg, največja dovoljena obremenitev: 410 kg, skupna masa: 750 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 3.010 mm, širina tovornega prostora: 1.530 mm, višina nakladalnega prostora: 400 mm, velikost pnevmatike: 13 Zoll, zavoro prikolice: priklopnik brez zavor, *NEW VEHICLE* Brenderup CLICK & COLLECT 2300SUB750 750 kg gross vehicle weight rating 340 kg unladen (empty) weight Dedpfx Aexrf Dcsl Hsut 410 kg payload capacity Internal loading dimensions: 3010 x 1530 x 400 mm Overall dimensions: 4230 x 1970 x 940 mm Loading height: 620 mm Single axle 13" wheels Steel sheet side panels Front and rear side panels fold down Tipping function Support wheel installed 8 internal lashing points 4 external lashing hooks Tarpaulin buttons Premium panel locks securely fasten the side panels Non-slip multiplex wooden floor Trade-in: We are happy to accept your trailer as a trade-in. Please contact us or send us pictures and vehicle details. Delivery: Upon advance payment, we can deliver your trailer to you on request. The cost is €1.60 per km (distance from Bielefeld to your destination) including VAT. We also offer the following services: -Service -Workshop -TÜV (Technical Inspection) -Tires and wheels -Tarpaulin covers and frames -Custom fabrication in our metalworking shop -Rental We constantly stock around 400 trailers! We look forward to your visit. Office, workshop, technical inspection, spare parts, rental, and exhibition area Senner Hellweg 187 33689 Bielefeld

Stanje: rabljeno, lastna masa: 10.000 kg, največja dovoljena obremenitev: 39.000 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2025, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, Oprema: ABS, dvižna zadnja plošča, For every used semi-trailer, you receive a current and comprehensive inspection and functionality report. Chassis: - Sturdy steel frame weldment with front frame camber and level loading platform, rear tapered edge approx. 500x100 mm - Neck 200 mm with beveled front corners - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area of the rear taper) - 2 king pin positions with replaceable 2" king pin - Outer frame closed outwards as a hole-type external frame - Load deck with extendable center frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm - Frame in front of and behind the division with 80x80 mm step Duodsxxl E Hepfx Al Hst - Reinforced frame version / point load in retracted position at center of gravity - With excavator trough (without covering), approx. 220 mm deep, approx. 600 mm wide, starting after 2nd axle to end of vehicle - 1 pair wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm Ramps: - 2 pieces 2-part loading ramps, special design with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting unit (only in combination with electro-hydraulic unit) - Width approx. 800 mm - Wood covering - Incl. traction ribs on loading ramps - Lockable in transport position with lashing straps - Operation by control lever mounted at rear right in frame - Laterally hydraulically adjustable Flooring: - 35 mm larch wood floor with aluminum omega profiles Axles, Steering and Tyres: - BPW air suspension axles, each with 10 t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lift and lowering device with total lift approx. 200 mm - 2nd driving height via ball valve +50 mm - 1st axle liftable (wired via EBS), automatic activation with mechanical emergency operation via button on trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, centrally aligned offset - 12 tyres, 245/70 R 17.5 143/141J, tubeless - Incl. tyre pressure monitoring Accessories: - Plug-in side and rear boards on the gooseneck, approx. 400 mm high - Spare wheel carrier - Lateral aluminum underrun protection - 4 wheel chocks with holders - Long license plate holder on end cross member - 1 ECE sign insertable at rear - 11 pairs of 10t lashing modules on the side: - 2x on the gooseneck - 2x on the deck before extension - 7x after extension - Pull-out warning signs incl. 3 position lamps each, front at landing gear and rear before end cross member, continuously extendable up to deck width of 4,500 mm - 4 mountings for warning signs to be inserted into stake pockets on the deck - 6 pairs of stake pockets on the side for plug-in stakes 100x50 mm - 2 rows of crosswise stake pockets for plug-in stakes 100x50 mm on the gooseneck from outer frame inwards to main frame (1x before, 1x after king pin positions) - 3 rows of crosswise stake pockets for plug-in stakes 100x50 mm on deck from outer frame inwards to main frame (1x before extension, 1x after extension, 1x after 3rd axle) - 2 pairs of steel plates in the load deck for container locks to accommodate 1x 20ft container

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 370 kg, največja dovoljena obremenitev: 1.630 kg, skupna masa: 2.000 kg, dolžina tovornega prostora: 3.300 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 300 mm, Product Information: "Anssems PLT2 2000 330x180 PRO Platform High Loader" High loader from manufacturer ANSSEMS, model PLT2 2000.330x180 Pro. The braked, tandem axle platform high loader from Anssems features as standard equipment: all-aluminum side panels that are foldable and removable, robust eccentric locks, internal lashing eyes, profile channels for attaching accessories or securing cargo, steel frame, jockey wheel, and a V-drawbar. We also offer a wide range of accessories for Anssems car trailers, such as high tarpaulin, flat tarpaulin, net hooks, mesh attachments, side panel extensions, rear support legs, storage boxes, straps, and anti-theft devices. ----- With us, you can also benefit from: · Financing · Leasing (for business customers only) · Consulting Dusdpfjwuq S Hjx Al Hot · Nationwide delivery within Germany (except islands) · Accessories · Rental trailers · Spare parts · Registration service for DH – HB – DEL · Service · Repairs · TÜV inspections for car trailers PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Opening hours: Monday - Friday 8:00 am – 5:00 pm

Stanje: novo, lastna masa: 120 kg, največja dovoljena obremenitev: 630 kg, skupna masa: 750 kg, dolžina tovornega prostora: 2.010 mm, širina tovornega prostora: 1.060 mm, višina nakladalnega prostora: 700 mm, velikost pnevmatike: 155/70R13, Small and maneuverable passenger car trailer from the manufacturer TEMARED. The open box trailer ECO2010KIPP is ideal for private transport purposes and small loads. Garden waste, small furniture – everything you might need for private use or small businesses. The trailer can be stood up and the drawbar folded down for easier storage. Standard equipment for the steel trailer includes a jockey wheel, side wall extensions, flat cover, locks, galvanized sidewalls and a foldable V-drawbar. Djdsuhl Rtepfx Al Hout This model is also available in several variants, for example as a box-lid trailer or tarpaulin trailer. We also offer trailer accessories such as tarpaulin and frame, drawbar box, and rear supports.