Volvo Maschinentransporter Mit Rampen Arbeitsbühnen nakup rabljenega (10.712)

Stanje: novo, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, zavore: retarder, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, skupna širina: 2.550 mm, dolžina tovornega prostora: 3.800 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, žerjav, Chassis – New Vehicle: – NEW MODEL 2025 - Manufacturer/Model: Volvo FH500 6x4, wheelbase 3700 mm - Fifth wheel with sliding mechanism and self-lubricating (type Jost JSK), mounted on the subframe - Reversing camera fully installed Bodywork: - Execution of all chassis modifications necessary for the crane body, disassembly and reassembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. - All chassis and superstructure work will be carried out in compliance with the relevant bodybuilder guidelines and executed in the highest quality accordingly. - Complete assembly of a special subframe made from fine-grain steel, developed in-house and manufactured in-house, for crane and body. The subframe is fully welded and bolted to the chassis frame, ensuring extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the subframe design. Work is carried out to the highest quality standards and painted in chassis color. - Assembly/bolting of the crane and main support carrier to the subframe. Installation of all hydraulic and electrical connections. Assembly position: front - Flatbed version as a steel/welded construction, removable - Length approx. 380 cm, width approx. 248 cm - Flatbed body painted, RAL shade (chassis color) - Removable aluminum sideboards, manufacturer Suer, height 600 mm, anodized design with integrated steps, removable Kinngripp stanchions - Standard flatbed floor with welded steel chequer plate 4 mm, painted in RAL (chassis color) - 6 pcs recessed lashing eyes 2500 daN per side, in slotted rail with flexible positioning - 4 x lashing brackets for chains 6500 daN (2 x front and 2 x rear of the body) - Solid front wall consisting of welded frame, welded-on 4mm steel plate and 5x accessory hooks, front wall height approx. 1300 mm, steel version painted, with 2x foldable lashing eyes welded on for tie-down straps - Cladding panels and mudguards made from aluminum chequer plate (sandblasted, powder-coated and painted), please state RAL colors - 2 pcs BROSSBOX toolboxes, aluminum chequer plate (sandblasted, powder-coated and painted), please state RAL colors; size and arrangement depend on wheelbase and available space - 1 pc BROSSBOX toolbox between crane and front wall - Multifix stanchion pockets, 2 rows (as agreed), with a distance of approx. 80 cm from front wall and rear - Holders (for support plates, crane pads) made from galvanized steel - Additional support legs installed under the chassis - Installation of underrun protection at the rear and of the additional support legs, including hydraulic and electric connections - Duomatic and red/yellow connections at the front for semi-trailer and at the rear for trailer New crane, type FASSI F545 RA 2.27, continuous rotation, fully assembled, installed and parameterized with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Fodpfx Aley Ei R As Hsgb Additional equipment and crane accessories: - 5 x crane support pads with brackets, arranged according to production drawings - AWC (automatic rope length control) - User manual, maintenance manual, and crane inspection book Lighting: - 2 x LED-AS integrated into the front wall - 2 x beacons on the FH roof - 2 x strobe lights in the bonnet - 2 x LED under the body at the rear, left and right, positioning as agreed - 4 x LED AS, 2x left and 2x right under the body in the B area

Stanje: novo, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, zavore: retarder, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, skupna širina: 2.550 mm, dolžina tovornega prostora: 3.800 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, žerjav, Chassis – New Vehicle: – NEW MODEL 2025 - Manufacturer/Model: Volvo FH500 6x4, wheelbase 3700 mm - Fifth wheel with sliding mechanism and self-lubricating (type Jost JSK), mounted on the subframe - Reversing camera fully installed Bodywork: - Execution of all chassis modifications necessary for the crane body, disassembly and reassembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. - All chassis and superstructure work will be carried out in compliance with the relevant bodybuilder guidelines and executed in the highest quality accordingly. - Complete assembly of a special subframe made from fine-grain steel, developed in-house and manufactured in-house, for crane and body. The subframe is fully welded and bolted to the chassis frame, ensuring extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the subframe design. Work is carried out to the highest quality standards and painted in chassis color. - Assembly/bolting of the crane and main support carrier to the subframe. Installation of all hydraulic and electrical connections. Assembly position: front - Flatbed version as a steel/welded construction, removable - Length approx. 380 cm, width approx. 248 cm - Flatbed body painted, RAL shade (chassis color) - Removable aluminum sideboards, manufacturer Suer, height 600 mm, anodized design with integrated steps, removable Kinngripp stanchions - Standard flatbed floor with welded steel chequer plate 4 mm, painted in RAL (chassis color) - 6 pcs recessed lashing eyes 2500 daN per side, in slotted rail with flexible positioning - 4 x lashing brackets for chains 6500 daN (2 x front and 2 x rear of the body) - Solid front wall consisting of welded frame, welded-on 4mm steel plate and 5x accessory hooks, front wall height approx. 1300 mm, steel version painted, with 2x foldable lashing eyes welded on for tie-down straps Fgedpfx Aley Ei Rvo Hob - Cladding panels and mudguards made from aluminum chequer plate (sandblasted, powder-coated and painted), please state RAL colors - 2 pcs BROSSBOX toolboxes, aluminum chequer plate (sandblasted, powder-coated and painted), please state RAL colors; size and arrangement depend on wheelbase and available space - 1 pc BROSSBOX toolbox between crane and front wall - Multifix stanchion pockets, 2 rows (as agreed), with a distance of approx. 80 cm from front wall and rear - Holders (for support plates, crane pads) made from galvanized steel - Additional support legs installed under the chassis - Installation of underrun protection at the rear and of the additional support legs, including hydraulic and electric connections - Duomatic and red/yellow connections at the front for semi-trailer and at the rear for trailer New crane, type FASSI F545 RA 2.27, continuous rotation, fully assembled, installed and parameterized with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional equipment and crane accessories: - 5 x crane support pads with brackets, arranged according to production drawings - AWC (automatic rope length control) - User manual, maintenance manual, and crane inspection book Lighting: - 2 x LED-AS integrated into the front wall - 2 x beacons on the FH roof - 2 x strobe lights in the bonnet - 2 x LED under the body at the rear, left and right, positioning as agreed - 4 x LED AS, 2x left and 2x right under the body in the B area

Stanje: novo, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, zavore: retarder, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, skupna širina: 2.550 mm, dolžina tovornega prostora: 3.800 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, žerjav, Chassis – New Vehicle: – NEW MODEL 2025 - Manufacturer/Model: Volvo FH500 6x4, wheelbase 3700 mm - Fifth wheel with sliding mechanism and self-lubricating (type Jost JSK), mounted on the subframe - Reversing camera fully installed Bodywork: - Execution of all chassis modifications necessary for the crane body, disassembly and reassembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. - All chassis and superstructure work will be carried out in compliance with the relevant bodybuilder guidelines and executed in the highest quality accordingly. - Complete assembly of a special subframe made from fine-grain steel, developed in-house and manufactured in-house, for crane and body. The subframe is fully welded and bolted to the chassis frame, ensuring extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the subframe design. Work is carried out to the highest quality standards and painted in chassis color. - Assembly/bolting of the crane and main support carrier to the subframe. Installation of all hydraulic and electrical connections. Assembly position: front - Flatbed version as a steel/welded construction, removable Fedpfxoydggqs Al Hjgb - Length approx. 380 cm, width approx. 248 cm - Flatbed body painted, RAL shade (chassis color) - Removable aluminum sideboards, manufacturer Suer, height 600 mm, anodized design with integrated steps, removable Kinngripp stanchions - Standard flatbed floor with welded steel chequer plate 4 mm, painted in RAL (chassis color) - 6 pcs recessed lashing eyes 2500 daN per side, in slotted rail with flexible positioning - 4 x lashing brackets for chains 6500 daN (2 x front and 2 x rear of the body) - Solid front wall consisting of welded frame, welded-on 4mm steel plate and 5x accessory hooks, front wall height approx. 1300 mm, steel version painted, with 2x foldable lashing eyes welded on for tie-down straps - Cladding panels and mudguards made from aluminum chequer plate (sandblasted, powder-coated and painted), please state RAL colors - 2 pcs BROSSBOX toolboxes, aluminum chequer plate (sandblasted, powder-coated and painted), please state RAL colors; size and arrangement depend on wheelbase and available space - 1 pc BROSSBOX toolbox between crane and front wall - Multifix stanchion pockets, 2 rows (as agreed), with a distance of approx. 80 cm from front wall and rear - Holders (for support plates, crane pads) made from galvanized steel - Additional support legs installed under the chassis - Installation of underrun protection at the rear and of the additional support legs, including hydraulic and electric connections - Duomatic and red/yellow connections at the front for semi-trailer and at the rear for trailer New crane, type FASSI F545 RA 2.27, continuous rotation, fully assembled, installed and parameterized with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional equipment and crane accessories: - 5 x crane support pads with brackets, arranged according to production drawings - AWC (automatic rope length control) - User manual, maintenance manual, and crane inspection book Lighting: - 2 x LED-AS integrated into the front wall - 2 x beacons on the FH roof - 2 x strobe lights in the bonnet - 2 x LED under the body at the rear, left and right, positioning as agreed - 4 x LED AS, 2x left and 2x right under the body in the B area

Stanje: rabljeno, prevoženi kilometri: 822.000 km, moč: 375 kW (509,86 KM), prva registracija: 09/2017, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, zavore: retarder, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: ABS, dvižna zadnja plošča, klimatska naprava, parkirni grelec, Volvo FH 500 BDF with refrigerated box body, retarder, lift/steer axle, tail lift, Euro 6 Reference for inquiries: 0226165 * Condition: Very good * Power: 375 kW / 500 HP * Emission standard: Euro 6 * Retarder * ABS * EBS * Rear axle differential lock * AdBlue (right side) * Lane departure warning system * Adaptive cruise control with emergency braking assistant * Electric sunroof * Air-suspended comfort driver’s seat * Driver’s seat heating * Suspension: Full air suspension * Automatic climate control * Auxiliary heater * Sleeper bunk * Overhead shelf above bunk * Electric windows (driver/passenger) * Electrically heated and adjustable mirrors * CD radio / AUX / USB / Bluetooth * Lift axle * Steer axle * Fog lights * External transparent sun visor * XL tank (right side) Tyres: 1st axle: 315 / 70 R 22.5 air-suspended / 40% 2nd axle: 315 / 70 R 22.5 air-suspended / 20% 3rd axle: 315 / 70 R 22.5 air-suspended / 30% (lift/steer axle) Schmitz Cargobull refrigerated swap body Reference for inquiries: 0226167 * Manufacturer: Schmitz Cargobull * Type: WKO * Year of manufacture: 11/2014 * Perm. total weight: 16,000 kg * Curb weight: 3,840 kg * Refrigeration unit: Carrier Vector 1550 Dimensions (cargo area/bed): Cargo length: 6,800 mm Cargo width: 2,490 mm Cargo height: 2,100 mm ---- Price: 32,900 EUR + 19% VAT For further questions, you can reach us at the following numbers: We speak: German, English, French and ????? Subject to errors, typos and prior sale. Fodjyxa Hujpfx Al Hegb

Stanje: rabljeno, lastna masa: 8.800 kg, največja dovoljena obremenitev: 31.200 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/1996, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.510 mm, višina nakladalnega prostora: 1 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, barva: rdeča, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Lokacija vozila: Bovenden, 4 osi, vrtljiva gred, listnato vzmetenje, razširljiv do 3 m, pritrdilna ušesa, dvo-delne nakladalne rampe, hidravlične rampe, zadnja podpora, stranska aluminijasta zaščita, dvojne pnevmatike, škatla za orodje. Nadgradnja: 4-osna nizkopodna prikolica s hidravličnimi dvodelnimi rampami. Višina nakladanja cca 900 mm. 4x SAF osi 10t, bobnaste zavore, vlečno uho 40 in 50 mm! Dolžina zgornje ploščadi cca 2900 mm! Dolžina spodnje ploščadi cca 7100 mm! PODATKI O DODATNI OPREMI BREZ GARANCIJE, spremembe, vmesna prodaja in napake pridržane! Fgsdpfx Ajywvhrsl Heb

Stanje: rabljeno, lastna masa: 3.210 kg, največja dovoljena obremenitev: 8.690 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 05/2021, naslednji pregled (TÜV): 06/2026, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.430 mm, višina nakladalnega prostora: 500 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17.5, Leto izdelave: 2021, Oprema: ABS, Nemško vozilo MASTERLINE Müller-Mitteltal KA-TA-R 11,9 trosmerni kiper sa rampama ispod utovarene Godina prve registracije: 05/2021 pocinkovan Dozvoljena ukupna masa: 11.900 kg Sopstvena masa: 3.210 kg Nosivost: 8.690 kg Dimenzije pneumatika: 235/75 R 17,5 Tandem osovina manja od 1 m Vučna ruda je neprekidno podesiva po visini, toplo pocinkovana, vučna kuka 40 mm Ram pocinkovan BPW osovine Visina poda: 0,93 m Dodatne usluge dostupne! Izvozne tablice (crvene / 30 dana) Nemačka Kratkoročne tablice (žute / 5 dana) Nemačka Moguća organizacija austrijskih prevoznih tablica Isporuka vozila (uz nadoknadu) Fedpfoyxbgcex Al Hegb Podaci dati na internetu su nezahtevne informacije. Ne predstavljaju zagarantovana svojstva. Prodavac ne preuzima odgovornost za greške, tipografske greške i greške u prenosu podataka. Prodaja uz mogućnost prethodne prodaje. Prodaja isključivo privrednim subjektima. Važe isključivo naši Opšti uslovi poslovanja.

Stanje: rabljeno, lastna masa: 3.210 kg, največja dovoljena obremenitev: 8.690 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 05/2021, naslednji pregled (TÜV): 06/2026, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.430 mm, višina nakladalnega prostora: 500 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17.5, Leto izdelave: 2021, Oprema: ABS, Nemško vozilo MASTERLINE Müller-Mitteltal KA-TA-R 11,9 trosmerni kiper sa rampama ispod utovarene Godina prve registracije: 05/2021 pocinkovan Dozvoljena ukupna masa: 11.900 kg Sopstvena masa: 3.210 kg Nosivost: 8.690 kg Dimenzije pneumatika: 235/75 R 17,5 Tandem osovina manja od 1 m Vučna ruda je neprekidno podesiva po visini, toplo pocinkovana, vučna kuka 40 mm Ram pocinkovan BPW osovine Visina poda: 0,93 m Dodatne usluge dostupne! Izvozne tablice (crvene / 30 dana) Nemačka Kratkoročne tablice (žute / 5 dana) Nemačka Moguća organizacija austrijskih prevoznih tablica Isporuka vozila (uz nadoknadu) Fgedpfx Aljyw N Npj Hjb Podaci dati na internetu su nezahtevne informacije. Ne predstavljaju zagarantovana svojstva. Prodavac ne preuzima odgovornost za greške, tipografske greške i greške u prenosu podataka. Prodaja uz mogućnost prethodne prodaje. Prodaja isključivo privrednim subjektima. Važe isključivo naši Opšti uslovi poslovanja.

Stanje: novo, največja dovoljena obremenitev: 11.050 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, * Müller-Mitteltal KA-TA-R 14.4 Tandem Low-Loader Three-Way Tipper Trailer with Ramps * NEW VEHICLE * Available mid-May 2026 in RAL 9016 traffic white * Leasing, financing, and trade-in of your old trailer possible * Reference number for inquiries: 30505 * Remote diagnosis unit (RDÜ) with display option in the truck via EBS signal * Side marker lights with indicator activation * GVW: 14,400 kg, payload: 11,050 kg * EBS 2S/2M * Galvanized floor, 5m x 2.42m x 0.5m, drop side panels, laser-welded, pendulum-mounted, fold-down and removable, prepared for later retrofitting of side wall extensions * Lockable compartment under the tipping bridge for access ramp * Incl. 1 pair of aluminum loading ramps, 8t/pair, 3.57m * Galvanized chassis, galvanized front wall * 4 UVV lashing rings LC 5,000daN at front and rear + 8 recessed and foldable lashing points LC 3,000daN in tipping floor (centered) * Hardwood excavator bucket rest * Two-step access in front of the front wall (galvanized) * Stepless height-adjustable drawbar, galvanized, 40mm towing eye * Wide tires 385/55R 19.5 (4x), parabolic springs * Mesh hooks, rear staking posts bolted, galvanized * Extension cables for rear side panel * Plastic toolbox on right chassis frame * LED lighting system 12 + 24 Volt * 2 LED reversing lights at the rear of the trailer * Hire-purchase price: for example, €549 per month over 60 months, no down payment, no residual value. An offer from our financing partner "FM LeasingPartner". Other terms with/without residual value or down payment available * Request an offer from us! * We are Müller-Mitteltal trading partners * Free delivery to your site possible with timely order! Fodpjyvxg Isfx Al Hogb ----Our opening hours: Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside of these hours by appointment We speak German, English, Polish, and French. Whatsapp

Stanje: rabljeno, največja dovoljena obremenitev: 17.500 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2005, naslednji pregled (TÜV): 01/2027, širina tovornega prostora: 2.500 mm, ? Hidravlične rampe ? Razširljive ? 8 pritrdilnih ušes na vsaki strani ? Nosilec za rezervno kolo ? Nakladalna višina: ca. 930 mm ? Bobnasta zavora ? Duomatski priključek Fjdpfx Ajytz Hwol Hjgb ? Listnato vzmetenje ? Dvojna kolesa Vse informacije brez jamstva / Možen vmesni prodaj.

Stanje: rabljeno, prevoženi kilometri: 979.453 km, moč: 345 kW (469,07 KM), prva registracija: 01/2015, vrsta goriva: dizel, skupna masa: 44.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 02/2026, barva: bela, vrsta prenosa: polavtomatski, emisijski razred: Euro 6, skupna širina: 2.550 mm, skupna višina: 4.000 mm, prostornina tovornega prostora: 120 m³, dolžina tovornega prostora: 15.400 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.100 mm, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, parkirni grelec, WhatsApp: COMPLETE SET VOLVO + SCHMITZ 01/2015 VOLVO FH 420 6x2R Globetrotter Jumbo Truck 120m³ Equipment: CHH-MED L2H2, Globetrotter cab EURO 6 D13K460 engine, 13 L, 469 HP/345 kW, 2346 Nm VEB+ Gearbox SPO2812, 12-speed I-Shift DualClutch Fuel and Economy Program Manual shift function in automatic + kickdown Wheelbase 4900 mm Front/rear axle (technically) max 8.0/19 t Air suspension front+rear+tag axle Stabilizer rigid front, reinforced rear Lift axle Rear axle RS1356SV hypoid, with differential lock, i=2.50 Axle load distribution 11.3/6.7 t Reinforced trailing/tag axle Axle load limiter 11.5 t Equipment packages: Driver Comfort + Heated, electrically adjustable rear-view and wide-angle mirrors Air conditioning with automatic temperature control Sun visor Central locking Full instrument cluster Roof hatch Leather armrests, driver + passenger Leather steering wheel Driver Relax 2 Shift console, 2 beds 76x200 + 70x190 cm 2 reading lights Interior lighting dimmer + red night lighting Audio + Radio fully equipped, 4x35 W, CD+USB+AUX+Bluetooth Driver Vision + Rain sensor Bi-Xenon headlights Headlamp cleaning system Static cornering light Gross combination weight 44 t Disc brakes, electronically controlled, TCS, EBS, ABS Electronic level control Frame height 8 mm, 266 mm 2 batteries, 24V/225 Ah, CCA DIN/SAE 690/1150 A 540+255 L aluminium fuel tank AdBlue tank left, 95 L stainless steel Toolbox left, L=800 mm, 250 L/130 kg capacity Side underrun protection, foldable and removable Trailer traverse mounted below, for central axle trailers 50mm trailer coupling Rear underrun protection Steel rims 295/60R22.5 Air compressor 2-cylinder, 1080 L/min Alternator 120A/3360W Low noise 80 dB(A) RL 92/97 EWG (EU-96) Closed crankcase ventilation Increased cooling capacity Cab interior and seats textile, door trims in vinyl Luxury air-suspended driver’s seat, heated, seatbelt integrated, electrically adjustable, 3 memory settings Passenger seat air suspended Storage box under bunk Auxiliary heater diesel/water for engine + cab Engine pre-heating 220 V/1.5 kW Tinted windows Electric windows Temperature gauge Cruise control OBU (toll device, Toll Collect) Digital tachograph Speed limiter 90 km/h Jack 12 t, vehicle tool kit, tire inflation hose Fgsdpsxw Iyqjfx Al Hsb 2 rubber floor mats Insect screen in front of radiator Fully air-suspended cab Roof spoiler + side panels Fog lights Roof sign lighting Horn “Jericho” 1103WHIT winter white, NCS 1202-Y03R Trailer connection Duomatic + 15-pin socket Remote unlocking tow hitch Complete labelling (ADR, ECE-70) CB radio STABO MARLEN storage table Work lights Curtainsider body MCS-7.350 Dimensions 7.33 x 2.48 x 3 m Low subframe, crossmembers at close intervals Lashing eyes Floor 27 mm Sheet metal cover area rear axle Inspection hatch above gearbox Stanchions: type HESTAL Front wall support Rear stanchions with horizontal tensioning mechanism Double-wing volume rear doors, 270° opening angle, door retainers Doors can remain closed when raising the roof Volume roof beam EDSCHA sliding roof Lift roof: mechanical lift-lowering roof Subframe galvanized + painted Alu insert slats Rubber roll bumpers Load securing certificate EN12642 Code XL SCHMITZ Cargobull Central Axle Trailer Chassis ZCS 18 – 8.130 GALVANIZED Dimensions 8.13 x 2.48 x 3.1 m Welded construction Lashing rings in exter

Stanje: rabljeno, skupna masa: 47.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2004, naslednji pregled (TÜV): 08/2026, * Müller Mitteltal TS3 nizkopodni polpriklopnik Fodpsw Tgkbsfx Al Hegb * Prva registracija: 11/2004 * 3 osi * Zračno vzmetenje * Gigant osi * Hidravlične dolge rampe, pomične in zložljive * Razširitve iz 2,50 m na 3,0 m širina nakladalnega prostora * Nakladalna dolžina: 8,50 m pri nakladalni višini 0,85 m * Nakladalna dolžina na vratu: 3,40 m pri nakladalni višini 1,50 m * Podpore * Neto teža: 10.260 kg * Tehnično dovoljena skupna masa: 47.000 kg * TÜV veljaven do: 08/2026 * Tehnični pregled do: 02/2026

Stanje: rabljeno, prevoženi kilometri: 567.557 km, moč: 309 kW (420,12 KM), prva registracija: 02/2015, vrsta goriva: dizel, velikost pnevmatike: 315/60R22.5, konfiguracija osi: 6x2, medosna razdalja: 4.570 mm, gorivo: dizel, zavore: zaviranje z motorjem, barva: modra, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: zrak, skupna dolžina: 6.730 mm, skupna širina: 2.520 mm, Leto izdelave: 2015, Oprema: ABS, AdBlue, centralno zaklepanje, električno upravljanje oken, greljenje sedeža, hladilnik, klimatska naprava, nadzor oprijema, parkirni grelec, tempomat, zapora diferenciala, = Additional options and equipment = - Electrically folding exterior mirrors - Remote-controlled central locking - Leather upholstery - Lift axle - Air suspension - PTO - Radio - Disc brakes - Sun visor - Auxiliary heater - Toolbox = Remarks = Volvo FH 420 6x2 First registration: 11-02-2015 Mileage: 567,500 km Euro 6 Steered tag axle Refrigerator 2 fuel tanks New type tachograph Draco semi-trailer Type: DSC 339 First registration: 2003 Maximum weight: 39,000 kg Forced steering / Tridec system Twist-locks Stake pockets Removable support frame to be mounted on the twist-locks Toolboxes Loading platform height: 90 cm Loading platform length: 910 cm + extendable by 650 cm Distance from crane to end of trailer: 12.10 m Palfinger PK78002 D 5 hydraulic extensions up to 13.9 m 1 manual extension up to 16 m Hydraulically stabilised Scanreco radio remote control Continuous rotation = Further information = Technical information Number of cylinders: 6 Axle configuration Tyre size: 315/60R22.5 Brakes: Disc brakes Suspension: Air suspension Front axle: Steered; Left tyre tread: 50%; Right tyre tread: 50% Rear axle 1: Twin tires; Left inner tread: 60%; Left outer tread: 60%; Right inner tread: 60%; Right outer tread: 60% Rear axle 2: Steered; Left tread: 70%; Right tread: 70% Weights Unladen weight: 9,105 kg Payload: 17,395 kg Gross vehicle weight: 26,500 kg Functional Crane: Palfinger Interior Upholstery: Leather Fgjdpfxoycwkke Al Hsb Financial information Price: On request Identification Type number: FH420 6x2*4 / SEMITRAILER + PALF = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) "Govorim po ryccki". We strive to provide correct information; however, no rights can be derived from the texts provided.

Stanje: rabljeno, lastna masa: 6.500 kg, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2008, naslednji pregled (TÜV): 03/2024, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 910 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, barva: oranžna, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, leaf suspension, 3 axles, BPW axles, turntable, ABS (anti-lock braking system), lashing eyes, hydraulic ramps, rear supports, side aluminum underrun protection, twin tires, storage box Body: Hydraulic ramps, extendable to 3m. BPW axles, drum brakes, lashing rings on the outer sides. Ramp length approx. 4000mm! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Fodoqpgtmepfx Al Hsgb

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lift and lower system and RtR-valve * Smart Board installed on trailer as information tool (axle load display - separate for front and rear) * Tire pressure monitoring with display option in the truck via EBS signal without truck-side installation * Side underrun protection * Swivel supports at rear of chassis frame Fgsdpfxotplwij Al Heb * Mechanically adjustable warning sign packages at front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight galvanized steel skirts with spray protection * Contour tape on sides and rear, reflective * 15-pin power plug * LED lighting 12 / 24 V * LED beacon (removable) at rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, black powder coated, side right * Compartment in rotary frame for accessories with folding lid, 2 pcs. container locks permanently installed (directly after turntable platform) * ROBOT welded anti-slip coating on the steel plate of the rotary frame platform (protruding weld seams) * Load securing package consisting of: 2 lashing rings (13.4 t) at front left & right on front wall bearer, front & rear 1 pair of UVV lashing rings (13.4 t), and on each side 3 pairs of UVV lashing rings (10 t) pivotable and lowerable, loadable in all directions and embedded in the outer frame, each side with 3 stake pockets with simultaneous 2 t lashing option * 6 pairs mechanical folding outriggers for 3 m total width (not in the rear taper) * Extension boards stored in the middle of the loading area * Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm * Mechanically laterally adjustable * 4-way control block for later retrofitting of hydraulic ramp shift * Excavator arm storage over rear axle, continuous to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing rings LC 6400 daN in excavator arm storage at side in longitudinal frame * 2 steps galvanized at rotary frame left + right * Profifix lashing strip centered in longitudinal axis, in flat area for lashing up to LC 3000 daN * Chassis, turntable, folding outriggers, drop supports, and drive-on ramps hot-dip galvanized * Axles, slewing ring, air tank, tow bar painted in black tone * Loading edge loaded approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer warranty * Errors and intermediate sale excepted * Available approx. from week 22/2026 * Sample images

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * PT 30 Profile: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lifting and lowering function, including raising/lowering (RtR) valve * Smart-board infotool mounted on trailer (for separate axle load display front/rear) * Tire pressure monitoring with display option in the truck via EBS signal—no installation required on the truck side * Side underrun protection * Rear swing-down support legs on chassis frame * Mechanically adjustable warning sign packages front and rear * Front plastic quarter mudguards with splash guards * Rear straight galvanized steel skirts with splash guards * Reflective contour tape on sides and rear * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar, 1,200 mm long with 40 mm towing eye, height adjustable via drawbar spring & turnbuckle * Tool box made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted on right side * Box in turntable for accessories with folding lid, 2 container locks permanently installed (directly behind the turntable platform) * Robot-welded anti-slip coating on the steel plate of the turntable platform (projecting weld beads) * Load securing package consisting of: 2 lashing rings (13.4 t) front left & right on bulkhead support, 1 pair each of UVV lashing rings (13.4 t) at front & rear, and 3 pairs UVV lashing rings (10 t) on each side, swiveling and lowerable, loadable in all directions and recessed into the outer frame, 3 stake pockets per side with simultaneous 2 t lashing capability * 6 pairs of mechanical folding outriggers for a total width of 3 m (not in the rear slope) * Widening boards stored in the center of the loading area * Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm * Mechanically side-adjustable * 4-way control block for future retrofitting of hydraulic ramp shift * Excavator arm storage above rear axle, continuous up to end cross member (total length approx. 2,100 mm) * 2 pairs of lashing rings LC 6,400 daN in the excavator arm storage, mounted on the side in the longitudinal frame * 2 galvanized steps on turntable left & right * Profifix lashing rail along the longitudinal axis in the center, on flat area, lashing capacity up to LC 3,000 daN * Chassis, turntable, folding outriggers, drop legs and drive-on ramps hot-dip galvanized * Axles, turntable ring, air reservoirs, towing fork painted black * Loading edge height approx. 910 mm +/- 20 mm (depending on air suspension) * New vehicle with manufacturer's warranty Fedpfx Aloxptn Re Hjgb * Errors and prior sale excepted * Available approx. from week 22/2026 * Sample images

Stanje: rabljeno, prevoženi kilometri: 999.004 km, moč: 405 kW (550,65 KM), prva registracija: 07/2012, vrsta goriva: dizel, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, barva: srebrn, vrsta prenosa: samodejen, emisijski razred: Euro 5, Leto izdelave: 2012, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, parkirni grelec, Volvo FH 540 4x2 Globetrotter XL VIN: A731704 Volvo Ocean Race "Limited Edition" Collector’s Condition? Chassis / Attachments * Full air suspension Fjdpfxeu Ry Nlo Al Hegb * Wheelbase: 3,800 mm * Tyres: front 385/65 R22.5, rear 315/80 R22.5 * Remaining tread: front ~40%, rear ~40% * 1 x aluminium fuel tank + AdBlue tank Cab Equipment * Globetrotter XL cab * Light bar with 6 spotlights * Kelsa side bar * Kelsa front bar * 2 air horns * 2 bunks * Auxiliary heater * Independent air conditioning * Automatic climate control * CD radio / AUX / USB * Lane departure warning system * ACC = Adaptive Cruise Control Engine / Transmission * 405 kW // 12,777 cm³ // Euro 5 * I-Shift // automatic transmission * VEB+ * Differential lock Weights * Gross weight: 19,000 kg * Payload: 10,763 kg * Tare weight: 8,237 kg Miscellaneous * French registration * 1 previous owner New general inspections / safety inspections or modification of permissible gross weight (increase/reduction) available on request. We are happy to assist you in obtaining export/transfer plates, and can also arrange inland delivery of purchased vehicles within Germany. Contact us! --- We speak the following languages: German, English and Russian! --- Subject to errors, omissions, prior sale, and changes! No liability for printing or typographical errors. --- Who are we? Leible Commercial Vehicles is a family-owned business based in Kehl am Rhein. With our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. Leible’s key strength lies in the sale of new and used commercial vehicles. Our 11,000 m² premises offer a large selection of vehicles. Our company philosophy is characterised by fairness and trustworthiness. As customer satisfaction is our top priority, we provide an excellent all-round service package and a dedicated contact person to assist you during the purchase or sale of your vehicle. See for yourself! Our services for you: Loading of vehicles We’re happy to assist with loading your purchased vehicles. Arrangement of special transports We can assist you in organising special transports. Temporary / Export number plates We can help you obtain export or temporary registration plates. Handling customs formalities We’re happy to assist with customs formalities.

Stanje: novo, največja dovoljena obremenitev: 31.630 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.520 mm, * T 4: * EBS (electronic braking system) * Emergency release device for spring-loaded brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required * Warning panel packages front & rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * LED beacon (removable) on the rear * 24 V 15-pin, plus additional 12 V 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and stepless height adjustment * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, right-hand side * Closed single plastic mudguards at the front * Straight steel rear mudflaps each with spray suppression (splash suppression) * Side underrun protection * Extended drop member by 500 mm to the front Fedporczm Defx Al Hsgb * Turntable platform extended by 520 mm at the front with 45° corners and 3 integrated lockable storage compartments incl. lids * Chassis made of high-strength fine-grain steel * Floor over turntable platform: 50 mm, low-loader platform: 60 mm softwood * Outer planks of the loading ramps made of 50 mm bamboo wood * Four stake pockets per side (stakes not included), each with 2 t lashing capability * Load securing package includes: 2 lashing eyes 6.4 t front left and right on main turntable frame, side front and rear each 1 pair 13.4 t lashing rings on outer frame, 4 pairs per side 10 t swiveling and lowerable lashing rings loadable from all directions recessed in outer frame, 2 pairs 6.4 t lashing rings on each side in the excavator arm rest, 8 pairs galvanized folding outriggers for 3 meter total width (not at the rear bevel) * Widening planks stowed in a compartment on the left side * Excavator arm rest above the rear axle to end of approach ramp approx. 2,300 x 740 x 190 mm * Mechanical drop supports at the rear * Hydraulic, hot-dip galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp shift via sliding pipe from ramp shaft * Loading area over slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded platform height approx. 860 mm (incl. 860 mm approach ramp) * Chassis, turntable, loading ramps, mechanical folding supports rear hot-dip galvanized * Axles, springs, air reservoir and slewing ring painted in black tone * New vehicle with manufacturer's warranty * Errors and interim sale reserved * Available from CW 21 / 2026

Stanje: novo, največja dovoljena obremenitev: 31.630 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.520 mm, * T 4: * EBS (Electronic Braking System) * Emergency release device for spring-loaded brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation, front and rear * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * Warning sign packages front & rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon, rear * 24 V – 15-pin and additional 12 V – 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and stepless height adjustment * Toolbox made of powder-coated sheet steel and spare wheel holder in basket design, mounted right side * Closed single plastic mudguards front Fgedpfx Asl Th Evol Hsb * Rear straight steel mud flaps each with spray suppression * Lateral underrun protection * Extended offset crank by 500 mm to the front * Turntable platform front section extended by 520 mm with 45° corners and 3 integrated, lockable storage compartments with lids * Chassis made from high-strength fine-grained steel * Flooring over turntable platform made of 50 mm softwood, and in lowbed platform from 60 mm softwood * Outer boards of access ramps made of 50 mm bamboo * Four stake pockets per side (stakes not included), each with 2 t lashing point capacity * Lashing package consisting of: 2 lashing eyes 6.4 t on main frame of turntable platform (front left and right); 1 pair of 13.4 t lashing rings per side front and rear on outer frame; 4 pairs per side of 10 t pivoting and lowerable lashing rings, loadable in all directions, recessed in outer frame; 2 pairs of 6.4 t lashing rings on each side in the excavator arm recess; 8 pairs galvanized folding markers for 3 m overall width (not on rear slope) * Extension planks stored in left-side compartment * Excavator arm recess above rear axle to end of approach slope approx. 2,300 x 740 x 190 mm * Mechanical drop-down supports rear * Hydraulic, hot-dip galvanized access ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp adjustment via sliding tube from ramp shaft * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded loading height approx. 860 mm (includes 860 mm approach slope) * Chassis, turntable, loading ramps, mechanical folding supports rear hot-dip galvanized * Axles, springs, air tanks and turntable painted black * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from week 21/2026

Stanje: novo, največja dovoljena obremenitev: 8.850 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem compensating unit ----Drawbar / Flange Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flange eye ----General Fittings: * Jost mechanical landing gear at front * Rear: 2 mechanical, hot-dip galvanized drop-down support legs * Plastic toolbox approx. 750 x 350 x 300 mm, fitted on right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS tire pressure monitoring system ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking fixtures, plus 2 at the front wall * Steel pallet, 3-way tipping body (continuous sidewalls – without center stanchions – foldable with drop side spring assistance) * Rear stanchions bolted * Combination steel double rear doors, asymmetrically split, can be swung open and locked at 270°, not foldable – with additional pendulum frame for automatic tailgate opening during tipping operation; locking via galvanized swing bolt locking and central locking system * Deactivation function for automatic rear wall opening when tipping backwards with open door * 4 mm steel floor plate * Rear ramp carrier rail for drive-on ramps ----Load Securing: * 1 x 5 t lashing point in each corner * 4 x 3 t recessed lashing rings per side, fitted in the outer frame ----Ramps: * 1 pair of aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for vehicles on rubber tires & tracks * Lockable storage compartment for ramps under the loading platform, integrated into the chassis Fedpfjl Thyxjx Al Hsgb ----Paint Finish: * Drawbar, front wall, tipping platform, rear stanchions, underrun protection, and mechanical support legs hot-dip galvanized * Sidewalls and tailgate painted RAL 9010 pure white * Sidewall painting in any RAL color available at extra charge * Axles, springs, flange eye, air tank, and landing gear painted in a black tone ----Information: * Body reinforced with load securing certificate according to EN 12642 XL * New vehicle without initial registration, with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available ex-works Egestorf on A7

Stanje: novo, največja dovoljena obremenitev: 8.850 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: Fgodpfx Aol Thymol Hsb * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem load equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, on the right-hand side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS tire pressure monitoring system ----Tipper Body: * Net hooks at sides and rear in the central locking compartments, as well as 2 units on the front wall * Steel palletized 3-way tipper body (continuous side walls—without central stanchions—foldable with board spring-lifter) * Rear stanchions bolted * Combination steel double-wing rear doors, asymmetrically divided, can be opened and locked at 270°, not foldable—with additional swinging frame for automatic rear tailgate opening during tipping process; locking via galvanized locking rods and central locking * Deactivation function for automatic rear tailgate operation when tipping backwards with open wing door * 4 mm steel chequer plate floor * Rear mounting rail for loading ramps ----Load Securing: * One 5 t lashing ring per corner * Four 3 t lashing rings each side, recessed into the outer frame ----Ramps: * 1 pair aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment beneath the loading area, integrated into the chassis ----Paintwork: * Drawbar, front wall, tipper body, rear stanchions, underrun protection, and mechanical supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Side wall painting in other RAL color shades available for an additional charge * Axles, springs, flange eye, air tanks, and landing gear painted in black ----Information: * Reinforced body with cargo securing certificate according to EN 12642 XL * New vehicle, without initial registration, with manufacturer’s warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex works Egestorf on the A7 Motorway

Stanje: novo, največja dovoljena obremenitev: 8.500 kg, skupna masa: 11.990 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Oprema: ABS, * KA-TA-R 11.9 Masterline: * Front wall and floor hot-dip galvanized * Wabco ABS Fgedoq Hg D Hepfx Al Hjb * Emergency release device for spring-actuated cylinders * Drum brakes, 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit * Height-adjustable (by 300 mm) hot-dip galvanized drawbar with 40 mm flange towing eye * Jost mechanical landing gear at the front * Two mechanical, hot-dip galvanized folding support legs at the rear * 15-pin electrical connector * Multi-chamber tail lamps * Hot-dip galvanized bolted underrun protection * Tool box made of galvanized steel sheet, mounted on right side * Plastic quarter mudguards * Hot-dip galvanized chassis * Steel pallet 3-way tipper body * Continuous white-painted side walls at the top with internal tube reinforcement; foldable without center posts, with drop-side spring assist * Tailgate foldable and swinging, equipped with manual central locking * Hot-dip galvanized bolted rear stakes * Each corner equipped with 1 x 5 t lashing point and each side with 4 x 3 t lashing rings flush-mounted in the outer frame * 4 mm fine grain steel floor plate * Mesh hooks * Rear mounting rail for loading ramps * Removable steel side extensions, 500 mm high, 3 sides, swinging * Body reinforced and certified for load securing according to EN 12642 XL * 1 pair of aluminum drive-on ramps approx. 3,570 x 400 mm (load capacity 8 t per pair), suitable for rubber-tired and tracked vehicles * Rear lockable storage compartment recessed into the chassis below the loading area * Axles, springs, air tanks and landing gear painted in black * Tires 285/70 R 19.5 * Side panel color in RAL 9010 pure white * New vehicle with manufacturer’s warranty * Subject to error and prior sale * Immediately available ex-stock Egestorf, A7

Stanje: novo, največja dovoljena obremenitev: 16.000 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2024, * KA-TA-RT 21.0 ML: * Without ABS / EBS, approved for 40 km/h * Spring-loaded parking brake, drum brakes * Gigant axles * Tandem equalising unit with 100 mm wide parabolic springs * Support winch at the front * Mechanical drop-down supports at the rear * Fixed welded drawbar with low-maintenance ball coupling for K80 ball head coupling (adjustable by +77 mm / 33 mm via the head plate) with elevated bracket for connection lines * 12 V 7 + 4 pin power supply * LED lighting system 12 / 24 V with protective grille * 2 LED work lights at the rear, switchable from the towing vehicle without additional installations on the tractor unit * Side marker lamps with indicator function Fgodpfx Asr Dpzuol Hsb * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Chassis made of high-tensile steel * Steel platform body, 3-way tipper with M-Strong side boards (fixed front wall, continuous side walls – without central stanchions – swinging via manual central locking as well as mechanically folding down with sideboard spring assist) * Hydraulic tailgate, 500 mm high, acts as a hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor * 1 x 7 t anchor point in each corner and 4 x 3 t lashing rings recessed and foldable on each side * Galvanised two-step access in front of the front wall (left side) * 1 pair of aluminium loading ramps (10 t / pair for axle spacing over 2,500 mm) 3,570 x 410 x 120 mm, suitable for rubber-tyred and tracked vehicles * 2 recessed ramp compartments at the rear of the chassis, cargo securing according to EN 12642 XL * --Coupling height loaded approx. 530 mm * Unloaded approx. 590 mm -- * Bodywork finished in RAL 9010 pure white * Chassis, drawbar, rear drop supports, underrun protection galvanised * Axles, air tanks, front support winch * K80 coupling painted in black tone * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex-works Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.450 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 22.420 mm, višina nakladalnega prostora: 1.500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 Masterline: * includes 1 m mesh side extensions * EBS brake system * Emergency release device for spring brake cylinders * RDÜ tire pressure monitoring system Fedpfep Ncl Ssx Al Hogb * Drum brakes * 2 x 5.5 t BPW axles * Parabolic springs with tandem equalizing unit * 300 mm height-adjustable hot-dip galvanized tow bar with 40 mm flange towing eye * Jost mechanical landing gear at the front * Two mechanical hot-dip galvanized folding supports at the rear * Tool box made of galvanized steel sheet, right side * 15-pin electrical connector * Bolted underrun protection with LED tail lights * Plastic quarter mudguards * Net hooks mounted on sides and rear in the central locking compartments as well as 3 external hooks on the front wall * Hot-dip galvanized chassis * Steel 3-way tipper body, fully galvanized * Continuous, fold-down side walls without central stanchion, equipped with drop-side spring lifter * Tailgate fold-down and swinging via manual central locking * Hot-dip galvanized, bolted rear stanchion * One recessed folding 5 t lashing ring per corner and 4 folding 3 t lashing rings on each side * Recessed, folding lashing rings in the outer frame * 4 mm steel floor plate * Rear ramp channel for loading ramps * Body reinforced with load securing certificate according to EN 12642 XL * 1 pair of aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment at the rear, recessed under the loading surface in the chassis * 235/75 R 17.5 tires * Axles, springs, air tanks, drawbar, and supports painted in black * Side wall color hot-dip galvanized * 1-meter mesh side extensions, galvanized * Sample photos * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available immediately ex works Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 10.700 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 1.500 mm, Oprema: ABS, * KA-TA-R 14.4: * Front wall and floor hot-dip galvanized * Wabco ABS * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit * Height-adjustable hot-dip galvanized drawbar (approx. 300 mm) with 40 mm flanged towing eye * Jost mechanical landing gear at the front Fgedpfxop Ncmao Al Hob * Rear: 2 mechanical hot-dip galvanized folding supports * 15-pin power connector * Multi-chamber tail lights * Hot-dip galvanized bolted underrun protection * Tool box made of galvanized steel sheet, mounted right side * Plastic quarter mudguards * Hot-dip galvanized chassis * Steel pallet three-way tipper body * Continuous sidewalls in white, top with internal pipe reinforcement, foldable without center stanchions, with drop side spring assist * Tailgate foldable and swinging, manual central locking * Hot-dip galvanized screwed rear stanchions * Each corner equipped with 1 x 5 t lashing point, plus 4 x 3 t lashing rings recessed into the outer frame per side * 4 mm fine-grained steel floor plate * Net hooks, rear ramp mounting rail * Prepared for subsequent fitting of drop side extensions * Reinforced body with load securing certificate per EN 12642 XL * 1 pair of aluminium ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment recessed into the chassis below the loading area * Axles, springs, air reservoir, and landing gear painted in a shade of black * Side walls painted RAL 9010 pure white * 1 meter galvanized mesh side extensions * Tyres: 285/70 R 19.5 * Sample images * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex works Egestorf, A7

Stanje: novo, največja dovoljena obremenitev: 16.000 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2024, * KA-TA-RT 21.0 ML: * Without ABS / EBS, approved for 40 km/h * Spring-loaded parking brake, drum brakes * Gigant axles * Tandem compensating aggregate with 100 mm wide parabolic springs * Support windlass at the front Fgodsr Dpz Hopfx Al Hob * Mechanical drop-down supports at the rear * Fixed welded drawbar with low-maintenance K80 ball coupling (offset by +77 mm / 33 mm adjustable via head plate) with elevated gantry for connection lines * 12 V 7 + 4 pole electrical wiring * LED lighting system 12 / 24 V with protective grille * 2 LED work lights at the rear, switchable from towing vehicle without vehicle-side installation * Side marker lights with indicator control * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Chassis made of fine-grain steel * Steel Pal.- three-way tipper body with M-Strong side walls (fixed front wall, continuous side walls without central stanchions, swinging via manual central locking and mechanically foldable with side wall spring lifter * Hydraulic tailgate, 500 mm high, acts as a hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor * In each corner 1 x 7 t, and on each side 4 x 3 t recessed and foldable lashing rings * Hot-dip galvanized two-step access ladder in front of the front wall (left side) * 1 pair of aluminum ramps (10 t/pair with axle distance over 2,500 mm) 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles * 2 rear-integrated storage compartments for aluminum ramps in the chassis; load securing according to EN 12642 XL * --Coupling height loaded approx. 530 mm * unloaded approx. 590 mm-- * Body paint finish in RAL 9010 pure white * Chassis, drawbar, rear drop supports, underrun protection are hot-dip galvanized * Axles, air tanks, front support windlass * K80 coupling painted in a shade of black * New vehicle with manufacturer warranty * Errors and prior sale reserved * Immediately available ex Egestorf