Lecitrailer Plateau Ridelles Aluminium nakup rabljenega (6.405)

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Flatbed: ----Braking system: * EBS (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lift and lowering system ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (thus B-dimension of approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin electrical connector Bdjdpov D Tbdjfx Al Hjb * LED lighting system 12/24 V * 2 additional LED reversing lights at the rear (switched via reverse gear) * 1 removable LED beacon (incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning panel sets front and rear * Support windlass at the front * Outward folding support legs at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each left & right side * Side impact protection * Underrun protection * Plastic quarter mudguards ----Platform: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container external width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not according to DIN) for an absolute external width of 3,000 mm ----Load Securing: * Perforated outer frame, angled approx. 45 degrees, with 2 t lashing capacity every 480 mm * Optionally, installation of 3 t lashing shackles every 600 mm - each side equipped with 5 x 3 t UVV lashing shackles - * At each front and rear corner, 1 x 6.3 t lashing ring (front directly behind the container locks in the wood floor and rear in the end crossmember) * Various holes for 1.2 t lashing options in the front and rear crossmembers ----Ramps: * 1 pair of aluminium slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tyred and tracked vehicles * Rear accessible storage compartment underneath the loading platform, integrated in the chassis ----Painting: * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air tanks, front support windlass and flange towing eye painted in a shade of black ----Info: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery lead-time: * Available from CW 22/2026

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 10/2007, barva: drugo, Leto izdelave: 2007, Os 1: leva 10 mm desna 10 mm Bdodpfx Alsyvf Dlo Hsb Os 2: leva 12 mm desna 12 mm Os 3: leva 10 mm desna 10 mm = Več informacij = Lastna teža: 6.740 kg

Stanje: novo, moč: 125,03 kW (169,99 KM), vrsta goriva: dizel, skupna masa: 3.500 kg, konfiguracija osi: 4x2, medosna razdalja: 4.215 mm, barva: bela, emisijski razred: Euro 6, število sedežev: 3, prostornina tovornega prostora: 21 m³, dolžina tovornega prostora: 4.400 mm, širina tovornega prostora: 2.110 mm, višina nakladalnega prostora: 2.260 mm, Leto izdelave: 2025, Oprema: ABS, airbag, centralno zaklepanje, elektronski program stabilnosti (ESP), klimatska naprava, nadzor oprijema, računalnik na krovu, registracija vozila, spojler, tempomat, ALUMINIUM DROPSIDE VAN 8 EPAL Brand new, ready for registration and immediate delivery, this aluminium dropside van is specifically designed for the distribution of general goods. The New Renault Master 170.35 Red Edition, 2025 model, comes with a Renault 2000 cc engine, 170 HP, EURO VI-E, and features air conditioning, Bluetooth radio, 10-inch touchscreen, cruise control, spare wheel, front-wheel drive, single rear wheel, and is fitted with a corrugated aluminium box with internal dimensions L 440 cm x W 210 cm x H 226 cm, suitable for loading 8 EPAL pallets, payload capacity of 770 kg, marine-grade plywood floor, plastic-coated interior lining, and roof spoiler above the cab. Also available for LONG-TERM RENTAL. Scroll down to discover more details about this aluminium dropside van. PRODUCT CODE: N-712B TYPE CHASSIS EURO STANDARD EURO VI-E GROSS VEHICLE WEIGHT 3500 kg Bodpjxd Aqksfx Al Hsdb ENGINE 2000 CC Brand Renault Trucks INTERNAL DIMENSIONS L 440 cm x W 211 cm x H 226 cm PAYLOAD CAPACITY 770 kg POWER 170 HP RANGE Master TRANSMISSION 6-speed manual BODY TYPE Aluminium van FUEL Diesel WHEELBASE 4215 mm

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 470 kg, največja dovoljena obremenitev: 1.530 kg, skupna masa: 2.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.650 mm, širina tovornega prostora: 1.710 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, Scope of delivery: 1x Car Trailer High Loader Aluminium Tandem Trailer 365x171cm 2000kg Description: Multipurpose trailer designed for transporting various types of materials. Wheels positioned under the loading platform – the platform is wider and set higher compared to other box trailer series, making manual loading and unloading easier. All side panels are removable, allowing unrestricted loading, e.g., by forklift. Chassis made from structural steel, closed profile, bolted assembly. Floor constructed from high-quality, waterproof, and non-slip phenolic plywood. Technical Data: - Braked - Tandem axle - Support wheel - Wheel chocks with holder Gross weight: 2000kg Unladen weight: 470kg Payload: 1530kg Loading area length: 3650mm Loading area width: 1710mm Overall width: 1860mm Overall length: 5020mm Overall height: 1000mm Side wall height: 300mm Side wall material: Aluminium Manufacturer: Martz Connector type: 13-pin Trailer type: Box trailer Number of axles: 2 axles Suspension type: Rubber torsion axle Bjdpfexnbcmex Al Hsdb Drawbar type: V-drawbar Wheel position: Underfloor Floor: Phenolic plywood Wheels: 195/50 R13C Type of trailer: High loader Frame type: Bolted Frame material: Steel Applications: Building material transport, removals/furniture transport, general cargo transport, and more. Shock absorbers: No (Surcharge: €199 for 100 km/h upgrade)

Stanje: novo, lastna masa: 370 kg, največja dovoljena obremenitev: 930 kg, skupna masa: 1.300 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.510 mm, širina tovornega prostora: 1.250 mm, višina nakladalnega prostora: 1.560 mm, vzmetenje: drugo, Leto izdelave: 2025, * In stock // Immediately available * Manufacturer: Debon * Permissible total weight: 1,300 kg * Unladen weight: only 370 kg * Payload: approx. 930 kg * Internal dimensions (L x W x H): 251 x 125 x 156 cm * Overall dimensions (L x W x H): 370 x 172 x 205 cm Bdjdpfjpb D S Nox Al Heb * Clear rear loading dimensions (W x H): 124 x 148 cm * Phenolic resin-coated plywood floor (L x W): 230 x 125 cm * Tyres: 165R13C * V-drawbar, jockey wheel centrally mounted with reinforced flange * Maintenance-free rubber suspension axle * Overrun brake with automatic reversing mechanism * Polyester front-top composite with roof spoiler * Side panels: aluminium * Standard ramp-door combination at the rear * Rear supports as standard * 4 internal lashing rings * Impact-resistant plastic mudguards * 12V electrics, lighting in accordance with CE standards with 13-pin plug, reversing light * COC documents Equipment: * 100 km/h approval

Stanje: rabljeno, prevoženi kilometri: 756.900 km, moč: 303 kW (411,96 KM), prva registracija: 06/2015, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: rdeča, vrsta prenosa: samodejen, emisijski razred: Euro 6, skupna širina: 2.550 mm, skupna višina: 4.000 mm, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.550 mm, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, parkirni grelec, * DAF CD radio * On-board computer with multifunction steering wheel * Air conditioning * Auxiliary heater * Coffee machine * Cool box ----* Sun visor * Light bar with additional spotlights * Air horns * Rotating beacons * Storage box ----* Rear axle differential lock * Leaf/air suspension * Steerable trailing axle, liftable * Tire pressure monitoring system * Hill start assist * Cruise control ----* Electric/pneumatic jaw-type trailer coupling with DouMatik air connection * Platform body with fixed front wall ----* Tire size front axle: 385/65R22.5 * Tire size rear axle: 315/80R22.5 * Fuel tank: 480 L * AdBlue tank: 85 L * Technical gross weight: 27,000 kg * Curb weight: 12,902 kg * Permissible trailer load: 24,000 kg ----Vehicle ID: 11763----Subject to errors and prior sale----Advertising and various inscriptions have been digitally removed.-----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other services, we can offer the following for an additional charge:----* Trade-in of your old vehicle * TÜV/SP inspection * Complete export processing * Arrangement of financing * Application for export license plates * Vehicle transfer Bdsdpfxeynd Sxj Al Hsb * Vehicle registration * Vehicle recovery and transport ----YOUR VTS TEAM

Stanje: rabljeno, prva registracija: 03/2019, lastna masa: 5.940 kg, skupna masa: 39.000 kg, velikost pnevmatike: 385/65 R 22.5, konfiguracija osi: 3 osi, barva: rdeča, vrsta prenosa: mehanski, vzmetenje: zrak, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.200 mm, Oprema: ABS, Lesena tla, kolutne zavore, BPW osi, EBS, * demonstracijsko vozilo * Multilock zunanji okvir – dodatna pritrdilna očesa (4 x 2 kosa) integrirana v leseno tla na območju žerjavnih priključkov! Tla s protidrsnim premazom (TrailerSafetyFloor). Možne različne višine prednje stene! Na voljo več vozil z enako opremo – kontaktirajte nas! Bdjdpfox Exgmox Al Hjb

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem Low Loader ? Platform ? Trailer Bedjyadz Rjpfx Al Hedb Immediately available | Inquiry No.: 27678 | Delivery to your address possible * We are happy to provide you with an individual offer * ---- * GVW: 14.4t, Payload: 10.95t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27m x 2.47m platform with galvanized front wall, 400mm high * Excavator bucket rest made of hardwood, bolted to the front wall * Deck height unladen 930mm / laden 870mm * One-piece ramps with hot-dip galvanized grid grating, anti-slip design, can be pushed together to approx. 20 mm, secured by retaining rods and diagonal supports * Ramp lift with vertically mounted, adjustable springs for easy single-person operation * 4 UVV drop lashing rings (LC 6300 daN) * Perforated outer frame (45° angled with hole pattern for lashing equipment, lashing force per point LC 2000 daN with a minimum spacing of 480 mm. Installation of drop lashing rings LC 3000 daN at approx. 600 mm intervals possible) with close cross profiling, high-webbed front and rear closures and rear drive-on slope, hot-dip galvanized * 10 UVV lashing rings LC 3000 daN, retractable into existing hole grid in outer frame, additionally * Further lashing points by drilled holes (Ø 50 mm, LC 1200 daN) in the front and rear crossmember * Toolbox in front of the bulkhead * Side marker lights with indicator function * Softwood floor, 50 mm thick. Chassis hot-dip galvanized * 2 container locks recessed in the front crossmember * Height-adjustable telescopic landing gear at the front, fold-down supports at the rear * Drawbar with 40 mm towing eye (hot-dip galvanized), height adjustable; 50 mm eye available on request * 1 removable LED warning beacon at the rear ---- * Leasing, hire-purchase, financing, trade-in possible * For example: 515 euros at 60 months term, no down payment, no final installment * ---- * Our opening hours * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 Outside opening hours available by appointment We speak German, English, Polish, French Leasing, financing, trade-in possible

Stanje: rabljeno, največja dovoljena obremenitev: 21.660 kg, skupna masa: 28.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/1994, dolžina tovornega prostora: 11.900 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.400 mm, skupna širina: 2.550 mm, Vozilo / Nadgradnja: Polpriklopnik Prva registracija: 03/94 Skupna teža: 28.000 kg Lastna teža: 6.340 kg Nosilnost: 21.660 kg Skupna dolžina: 12.220 mm – 14.220 mm Dolžina nakladalnega prostora: cca 11.900 mm – 13.900 mm Širina: 2.550 mm / Nakladalna širina cca 2.500 mm Višina nakladanja: cca 1.400 mm Dodatne informacije: Bodpsyn Uzwjfx Al Hodb - Prednja stena 950 mm - LED vzvratne luči - 1. os je dvižna - Obremenitev agregata 18.000 kg - Hidravlično izvlečni zadnji izvlek - 2 m teleskopski izložni krak - Priključna mesta za kole in kole - Zračno vzmetenje - 6 parov priveznih obročev - 2x plastična škatla za orodje - Višinsko nastavljive sredinske podporne noge - Zaščita podvozja - BPW osi Vozilo je lahko polepljeno in/ali potiskano z oglasnimi napisi

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 03/2008, skupna dolžina: 13.860 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22.5, medosna razdalja: 8.960 mm, Leto izdelave: 2008, Oprema: ABS, = Druge možnosti in dodatna oprema = - Zračno vzmetenje = Dodatne informacije = Konfiguracija osi Dimenzija pnevmatik: 385/65 R 22.5 Znamka osi: BPW Zavore: bobnaste zavore Vzmetenje: zračno vzmetenje Zadnja os 1: profil pnevmatike levo: 25%; profil pnevmatike desno: 25% Zadnja os 2: profil pnevmatike levo: 25%; profil pnevmatike desno: 25% Zadnja os 3: profil pnevmatike levo: 25%; profil pnevmatike desno: 25% Teže Bodpfx Alex Tt Hkj Hjdb Lastna teža: 7.100 kg Nosilnost: 33.900 kg Skupna dovoljena masa: 41.000 kg Funkcionalno Višina nakladalne površine: 120 cm Stanje Poškodbe: nobene Identifikacija Registrska oznaka: OK-44-HL

Stanje: novo, številka stroja/vozila: eca976917d325d4adc41b69e8, lastna masa: 7.200 kg, največja dovoljena obremenitev: 27.800 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r 22,5, Further Information Chassis Semi-Trailer Freight Forwarding High-strength fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2-inch kingpin, main frame reinforcement for 25 t at the center of gravity over 3 m load length in the retracted state. 13 pairs of welded hooks for lashing strap attachment on the cross members 23 pairs of recessed lashing rings in the outer frame, each rated for 3.5 t Outer frame with load-lock profile for securing lashing straps Note! Not suitable for use with side walls! 24 t 2-speed landing gear in reinforced design for coupling/uncoupling under load, single-sided operation, with semi-circular lower part and straight mounting plate, with push compensation Wheel chocks with holder Aluminum side underrun protection Rear underrun protection Half-shell mudguards With anti-spray flaps in accordance with EC standards 1 spare wheel holder for 1 spare tire, with wheel fastening kit 1 stake storage box sealed on the sides, open at the top, beneath the loading floor, doors on both sides, width = 450 mm / height = 400/420 mm / depth = 2460 mm 6 pairs of extendable stanchion pockets for square stanchions 80x80 mm, extendable from load width 2000 mm to 3100 mm 4 pairs of stanchion pockets recessed in the outer frame, for square stanchions 80x80 mm 11 stanchion pockets embedded centrally in the floor, for square stanchions 80x80 mm, with reinforcement carrier, positioned between the outer stanchion pockets 5 x 3 pairs of stanchion pockets recessed in the outer longitudinal beams, for square stanchions 80x80 mm, including reinforcement carriers – for front and rear load securing during reinforcing mesh transports, 2x5000 mm or 2x6000 mm 6 lightweight insert stanchions, W=80/T=80 mm, usable height approx. 1850 mm, hot-dip galvanized, with upper cable guide for strap tensioning 12 lightweight insert stanchions, W=80/T=80 mm, usable height approx. 1850 mm, hot-dip galvanized, with welded lashing eyes at the bottom on both sides Note: Stanchion pockets and insert stanchions are not designed for the sole securing of long material, pipes, etc. without lashing 2 plastic toolboxes, with drawer and shelf, W=650 / H=520 / D=670 mm, lockable with a padlock (lock not included) 6 reinforcing steel winches with wire rope and counter hooks, with cable passage through the outer frame, 1 detachable mounting gearbox for the rebar winches – supplied loose (without frame mount) Telescoping Main frame telescopable Extendable by max. 4,000 mm and can be locked in place approx. every 500 mm Locking with pneumatic locking pin + frame lock indicator on both sides, operation via manual button, controls for brake/lock and suspension on the front left of the chassis in front of the axles Storage compartment between longitudinal beams in extended position Axles & Suspension SAF disc brake axles with 430 mm disc diameter Last axle with trailing steering, with automatic reverse lock via reversing light, and additional locking function on the vehicle via manual button, as well as manual switching in the towing vehicle (pin 10), without truck installation. Axle spacing staggered mm Air suspension 1st axle automatic lift axle, additionally electrically controllable from the truck, with traction aid, without truck installation (traction aid functional up to 30% axle overload and up to a speed of max. 25 km/h) Brake System 2-line compressed air brake system Bjdpfei Ri Szsx Al Hsdb Color-coded piping for easy maintenance Spring-loaded par

Stanje: novo, številka stroja/vozila: 1acf251a278ec5cde4067a7b1, lastna masa: 5.800 kg, največja dovoljena obremenitev: 22.200 kg, skupna masa: 28.000 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235/75 r17,5, Further information Chassis: Semi-trailer, fleet use Fine-grain steel welded construction, fifth wheel plate with interchangeable 2'' kingpin Outer frame with slightly sloped design, new version with load-lock profile for attaching tension straps 24 t two-speed landing gear, single-side operation, straight base, without compensating slide Free support foot dimension or free rear swing radius approx. 1920 mm 2 wheel chocks with holders Side underrun protection: aluminium Rear underrun protection: steel Quarter shell mudguards in front of and behind each axle 1 spare wheel carrier for 1 spare wheel, with wheel fastening kit 1 plastic toolbox, with shelf, width=620/height=360/depth=440 mm, lockable with a padlock (padlock not included) Axles & suspension Drum brake axles as per manufacturer's choice Axles/chassis laser-aligned to reduce tyre wear and fuel consumption Air suspension Braking system Two-line compressed air braking system, colour-coded line routing for easy service Spring-loaded parking brake Duomatic connection at the front, without connecting line EBS, Electronic Braking System with EBS socket at front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raise/lower valve Vehicle stability control system Wheels and tyres 235/75 R17.5, make as per manufacturer's choice Steel rims, factory silver Bedpjkv Uvzofx Al Hodb Electrics 24 Volt, multi-chamber lights, yellow side LED lighting 2 white position lights at the front 2 white/red lane departure lights at the rear 1 x 15-pin socket at the front, without connecting cable Flooring Anti-slip phenolic plywood, approx. 30 mm thick, for high point loading, suitable for forklift axle loads up to max. 5,600 kg Front wall / corner stanchions 25 mm aluminium hollow section, approx. 1,350 mm high, steel corner stanchions in volume version Country of registration / Plates Germany with Dekra inspection and expert report (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on sides and red at rear Paintwork Frame hot-dip galvanized incl. passivation, 15-year warranty against rust-through Front wall aluminium Attention! Archive photos shown!

Stanje: novo, številka stroja/vozila: c13a96854ea37997845c1bf36, lastna masa: 6.860 kg, največja dovoljena obremenitev: 28.140 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235/75 17,5,

Stanje: novo, številka stroja/vozila: e7fbe178b85a202cade7e95af, lastna masa: 5 kg, največja dovoljena obremenitev: 22 kg, skupna masa: 29 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis: Semi-Trailer for Freight Forwarding Fine-grained steel welded construction, fifth wheel plate with interchangeable king pin, two king pin positions. Outer frame slightly sloped with load-lock profile for attaching lashing straps. Note: When using lashing straps in conjunction with side boards, the side boards must be opened to attach the straps! 2 pairs of lashing rings recessed into the outer frame on the gooseneck, each rated at 5 tons 8 pairs of lashing rings recessed into the outer frame in the low bed, each rated at 5 tons 24-ton two-speed landing gear, single-sided operation, with straight lower section, without sliding compensation 2 wheel chocks with holders Aluminum side underrun protection Steel rear underrun protection Quarter shell mudguards in front of and behind the axle assembly 2 stainless steel toolboxes, width=600/height=400/depth=500 mm, with polished lockable door 2 pairs of stake pockets recessed into the outer frame on the gooseneck, internal dimensions 70 x 40 mm 6 pairs of stake pockets recessed into the outer frame in the low bed, internal dimensions 70 x 40 mm !!Internal width between stakes: 2,420 mm!! 3 lashing/stake rails in the low bed, recessed crosswise into the floor across the entire width up to the outer frame (max. usable internal width between external drop-in stakes approx. 2,170 mm), approx. 100 mm high. With 20 mm round bar rails, top and bottom, approx. 60 mm clearance between the round bars (top to bottom). Bottom finished with angle plate, half open to below. For lashing and setting stakes 80 x 80 mm. Quantity: Drop-in stakes B=80/T=50/L=1200 mm, hot-dip galvanized Quantity: Drop-in stakes B=80/T=80/L=1200 mm, hot-dip galvanized Note: Stake pockets / drop-in stakes are not intended as the sole means of load securing for long materials, pipes, etc. without lashing. Rear extension manual with hand crank, extendable approx. 1,500 mm, lockable every 500 mm, with support beam; load capacity at center of gravity: approx. 2,000 kg over entire width at 500 mm, 1,000 kg at 1,000 mm, 500 kg at 1,500 mm; includes extendable rear underrun guard with lighting. 2 pairs of drop-in stakes B=80/T=80/L=1200 mm, hot-dip galvanized Open storage compartment for drop-in stakes at the front wall or below the load area (for 10 drop-in stakes 80 x 50 x 1200 mm and 4 stakes 80 x 80 x 1200 mm) Axles & Suspension SAF drum brake axles Axles/chassis laser aligned, reduces tire wear and fuel consumption Last axle is steering, with automatic reverse lock via reverse light and additional manual lock on the vehicle via a hand button. Air suspension with raise & lower valve Wheels and Tires 235 / 75 R 17.5 Bdsdpfji Ri Hvox Al Heb Manufacturer’s choice Steel twin rims, factory silver Braking System 2-line compressed air brake system Spring-actuated parking brake 2 foolproof coupling heads at front, without connecting line EBS, Electronic Braking System with EBS socket at front, no connection cable Attention: The trailer may only be towed by vehicles that ensure ABS effectiveness! Axle load detection via EBS CAN bus signal, for display in driver’s cab; truck must be properly equipped, no truck installation (not a calibrated scale) Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin sockets at front, without connecting cables 2 additional LED work lights at rear, switched via reverse light 1 LED rotating beacon with bracket, switch

Stanje: novo, številka stroja/vozila: 59ade5d1599dcdee29033ac46, lastna masa: 6.350 kg, največja dovoljena obremenitev: 28.650 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 435/50 r19,5, Further Information Chassis semi-trailer for freight forwarding Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Full-width hook-in bar for aluminium ramps Frame in reinforced design for vehicle loading (up to the outer frame) Outer frame with load-lock profile approx. every 400 mm, for lashing strap hooks 10 pairs of lashing mushrooms recessed in the outer frame, each rated at 10 t 24 t two-speed landing gear with single-sided operation, half-round base and straight mounting plate, with compensating slide Folding rear support 2 wheel chocks with holder Aluminium side underrun protection Galvanised steel rear underrun protection Quarter-shell mudguards in front of 1st axle and behind each axle With anti-spray mud flaps behind each axle Pair of ferry lashing rings, yellow marked 1 spare wheel holder for 1 spare wheel, with wheel fastener kit 2 plastic toolboxes with drawer and shelf, W=650 / H=520 / D=670 mm, lockable with a padlock (padlock not included) Container locks: 4 pairs recessed in the floor for 2 x 20 ft or 1 x 40 ft containers, front-most position as flush fold-down lock 10 pairs of stake pockets recessed in the outer frame, internal dimension 70 x 40 mm 10 stake pockets recessed centrally in the floor, internal dimension 70 x 40 mm 2 cross lashing/stake rails recessed in the floor across the full width up to the outer frame (max. usable internal width between outer stanchions approx. 2170 mm), approx. 100 mm high. With 20 mm round steel bars, top and bottom, spacing approx. 60 mm (between round bars). Lower side with angle bracket as a termination, half open downward. For lashing and fitting stakes 80 x 80 mm as per Fliegl data sheet, positions 2 and 4 20 plug-in stanchions, hot-dip galvanized Note: Stake pockets/plug-in stanchions are not suitable for securing long goods, pipes, etc. by themselves without lashings Storage space for aluminium loading ramps, ramps insertable from the rear 3 pairs of folding lashing rings, 10 t in the outer frame (1 pair in front of bulkhead, 2 pairs in rear area) Axles + Suspension SAF disc brake axles Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension 1st axle is an automatic lift axle, including forced lowering and start-off aid, activation via 3x braking (start-off aid operates up to an axle overload of 30% and up to max. 25 km/h) Axle lift below recommended driving height, therefore no warranty for tire damage 2 ride heights, manually adjustable via rotary knob, 1 for 980 mm coupling height, 1 for 1100 mm coupling height (Note: Vehicle with inclined position) Braking System 2-line air brake system Color-coded airline routing for easy servicing Spring-actuated parking brake 2 front anti-mistake coupling heads, without interconnection line EBS, electronic braking system with EBS socket at the front, no connecting cable Attention: The trailer may only be towed by tractors that ensure ABS functionality! With lift & lower valve 2 ride heights, manually adjustable via rotary knob, 1 for 980 mm coupling height, 1 for 1100 mm coupling height (note: check total height, overheight is the customer's risk) Ride height in conjunction with lift axle: when lift axle is raised, loading and overall height increase by 50 mm (for Mega Flex only at low ride height or coupling height) Vehicle stability control system Wheels and Tyres 435/50 R19.5 manufacturer as per supplier's choice Bdodpsld Ihlefx Al Heb Steel rims, factory silver Electri

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 250 kg, skupna masa: 1.300 kg, konfiguracija osi: 1 os, prva registracija: 01/1992, naslednji pregled (TÜV): 02/2028, dolžina tovornega prostora: 2.510 mm, širina tovornega prostora: 1.260 mm, velikost pnevmatike: 195 / 60 R15, stanje pnevmatik: 100 odstotek, največja hitrost: 80 km/h, barva: srebrn, Leto izdelave: 1992, Custom-made! 40-year anti-perforation warranty Bdedpfx Aleyi Eibe Hjb --- Customer vehicle --- Fully restored as of 02/2026 NEW: - Axle VGB13M - 27222, 1350kg - Knott overrun brake system - 2x complete wheel assemblies 185/65 - Threaded rod, cast hinges, toggle latches, jockey wheel ST 48, 10x wheel bolts, lighting bracket, power cable, multifunction lights, Phenolic resin plywood with galvanized steel sheet, TÜV Standard equipment: Premium-quality base frame construction from FAB Bültmann, complete aluminum (special frame design) • Maintenance-free KNOTT rubber suspension axle with compact bearings for maximum load capacity • KNOTT V-type overrun brake, hot-dip galvanized, with automatic reverse mechanism Side walls made of double-walled, anodized aluminum, 25 mm thick Rear tailboard foldable Inserts at all 4 corners for tarpaulin frame, etc. Floor: 15 mm phenolic resin plywood, multi-bonded, anti-slip and waterproof Compact lighting unit, protected installation 12V electrical connector, 13-pin / ball coupling with safety indicator / TÜV

Stanje: novo, lastna masa: 9.500 kg, največja dovoljena obremenitev: 35.500 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R 19.5, barva: siv, obratovalna teža: 9.500 kg, Oprema: ABS, Loading platform in extendable design: Loading platform with hardwood planks, rear bevel approx. 1,000 mm x 8° 1 pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm 2 pairs of lashing rings (LC 5,000 daN) 1 pair of lashing rings (LC 10,000 daN) 6 pairs of fold-out lashing rings on the outside (LC 5,000 daN) 2 pairs of fold-out lashing rings on the outside (LC 10,000 daN) Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) Brake system: Brake system as per EU regulations with EBS-E (2S2M) Paintwork: Premium, long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer High-quality single-colour 2-component (2K) top coat in Nova grey Rear section metallized and painted in RAL 9010 (Pure White) No metallic paint possible Landing gear: JOST mechanical landing gear with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: Steel construction from high-tensile fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system: Electrical system according to EU regulations, 24 volt lighting Sockets: 24N, 24S & 15-pin Axles and tyres: BPW axles, air suspension, with disc brakes (377 mm), with lift/lower function Trailing steering axles with electro-magnetic reversing lock, actuated via reverse gear or manually Axle tool Tyres: 435/50 R 19.5 Bjdpfsk Eammex Al Hsdb Accessories included: At the galvanized front connection strip: yellow-red air couplings 4 wheel chocks with brackets 2" kingpin Galvanized steel front wall approx. 1,600 mm high, EN12642-XL White reflective tape to EU standards on the sides, extension section and red at the rear Loading platform with heavy-duty hardwood floor 9 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform 1 spare wheel holder under the platform on the right (direction of travel) Galvanized folding supports under the rear slope of the loading area Sliding mounting rails for ALU loading ramps at the rear of the vehicle European reflective plates (red-yellow) at the rear of the semi-trailer One mudflap at the rear of the semi-trailer Bracket for a rotating beacon at the rear of the semi-trailer At the gooseneck and on the rear panel left and right, each with a bracket for warning panels including socket One HDPE toolbox 620x360x610 under the platform on the left (direction of travel) 4 pairs of WADER container locks in the platform for 1x 20ft container or 1x 40ft container; additional locking position in the extension for a 45ft container 3 pairs of transverse stake pocket rails on the platform for 100 x 50 mm plug-in stanchions Lift axle on the front axle with control via TEBS E, depending on current axle load and loading condition Speed stickers 80 km/h on the rear and both sides Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light. Mounting for rotating beacon on warning boards Load gauge including axle load diagram HRM metallization (High Resistance Metallisation) of the outer frame Complete steel structure shot blasted, then specified visible surfaces metallized

Stanje: novo, lastna masa: 10.600 kg, največja dovoljena obremenitev: 35.400 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 940 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Loading area: - Loading deck in extendable design - Loading deck with hardwood planks, rear bevel approx. 500 mm x 8° - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - Cut-outs in the loading deck's external frame for attaching tension belts Braking system: - Braking system in accordance with EU regulations, with EBS-E (2S2M) Painting: - First-class, durable corrosion protection for the standard shot-blasted welded frame guaranteed by a two-component (2K) zinc-rich primer - High-quality two-component (2K) top coat in solid Novagrey - Rear section metallised and painted in RAL 9010 (pure white) - Metallic paint not available Landing gear: - JOST mechanical landing gear with 2-speed gearbox, 24t lifting capacity (test load 50t) Steel construction: - Steel structure made from high-strength fine grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, LED lighting 24 Volt - Sockets: 2x 7-pin & 15-pin Bjdpfx Aljl Ux Rws Hedb Axles and tyres: - BPW axles, air suspended, with disc brakes (377 mm), with lifting/lowering function - Hydro-mechanically forced steering - Axle tools - Twin tyres 235/75 R 17.5 Accessories included: - Yellow-red air couplings at the galvanised front connection bar - 4 wheel chocks with holder - 2" king pin - Galvanised steel headboard approx. 1600 mm high - White reflective tape on the sides, sliding section and rear in red in accordance with EU regulations - Loading deck with heavy-duty hardwood floor - Rear and front steering by cable - Remote control via push buttons, with single-track monitoring of the axles - With wireless remote control for rear steering - 9 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the loading deck - Galvanised folding supports under the loading deck bevel - Sliding mounting rail for aluminium loading ramps at the rear of the vehicle - European reflective panels (red-yellow) at the trailer rear - One mud flap at the trailer rear - Mount for a beacon at the trailer rear - Mounts for warning boards including socket on gooseneck and rear panel, each left and right - Stainless steel toolbox INOX 1,500 x 390 x 810 under the loading deck, right side in driving direction - Central lubrication system BEKAMAX (Pico) with NLHI-2 multipurpose grease and removable protection around pump - 6 pairs of WADER container locks on the loading deck for 1x 20ft, 2x 20ft or 1x 40ft containers, additional locking for one 45ft container in extendable section - 4 pairs of crosswise stake pocket strips mounted in the loading area for 100 x 50 mm plug-in stakes - Lift axle on the first axle, controlled by TEBS, dependent on current axle load and load condition - 80 km/h speed stickers at the rear and on both sides - Four extendable warning boards ca. 400 mm (approx. 423 x 423 mm) with LED position light - Beacon mount on the warning boards - Load gauge for axle load determination, including load diagram - HRM metallisation (High Resistance Metallisation) on the external frame - Complete steel construction shot-blasted, then all defined visible areas metallised with ZINACOR 850 (85% zinc, 15% aluminium) by thermal spraying

Stanje: novo, lastna masa: 11.300 kg, največja dovoljena obremenitev: 36.700 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.250 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 r 22,5, barva: sivo-črna, Oprema: ABS, Loading platform: Loading platform in extendable design with pneumatically operated locking mechanism A fixed intermediate table, approx. 250 mm wide, is mounted on the central beam 8 pairs of lashing rings, foldable outwards (LC 5,000 daN) 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) Openings in the outer frame of the loading platform for attaching tensioning straps (LC 2,000 daN) Bodpfshlz Shex Al Hjdb Axles and tyres: BPW axles and suspension, all axles with hydro-mechanical forced steering Disc brakes, technical axle load: 10,000 kg Air suspension with lift and lower valve Axle tools 6 tyres, size 385/65 R 22.5 Brake system: Brake system according to EU regulations with EBS-E (2S2M) Landing gear: JOST landing legs (mechanically operated) with 2-speed gearbox for 24 t lift load (50 t test load) Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX mounted on the front terminal board with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: First-class, long-lasting corrosion protection of the standard grit-blasted welded frame, guaranteed by a 2-component (2K) zinc-dust primer High-quality, single-colour 2-component (2K) top coat in Novagrau Rear section metallised and painted in RAL 9010 (pure white) No metallic paint finish possible Included accessories: At the gooseneck and at the rear plate, left and right, each with a bracket for warning signs, including socket Remote steering from the front and rear via cable remote control with push buttons, with single-track control of the axles Electro-hydraulic unit 4 wheel chocks with brackets on the front wall 2" kingpin A galvanised steel front wall approx. 2,200 mm high Yellow-red air couplings on the galvanised front terminal board White reflective tape on the side, at the extension and rear in accordance with EU regulations, red at the rear European reflective plates (red-yellow) on the rear of the trailer One mud flap on the rear of the trailer Manual and documentation Bracket for a revolving warning light at the rear of the trailer Loading platform with approx. 30 mm thick wooden floor set in omega profiles 10 pairs of stake pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading platform 1 spare wheel holder under the loading platform on the right-hand side in the driving direction 6 pairs of WADER container locks in the loading platform, for 1x 20ft container, 2x 20ft containers or 1x 40ft container; in the extension, an additional locking position is provided for a 45ft container 5 pairs of stake pocket strips, mounted transversely in the loading platform, for plug-in stanchions 100 x 50 mm A galvanised bracket mounted transversely under the loading platform (2,390 x 720 x 400 mm) Access ladder mounted on the right in the direction of travel One HDPE toolbox 1,200x500x480 mounted at the front under the loading platform on the left in the direction of travel Lift axle on the front axle with control via TEBS E depending on the current axle load and loading status Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable protection around the pump Red/white reflective tape on the extension of the loading platform On the central beam,

Stanje: novo, največja dovoljena obremenitev: 23.340 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, NEW VEHICLE Fliegl 3-Axle Flatbed Low Loader DTL - S - 300 Agrar, chassis and frame hot-dip galvanized Gross weight: 24,000 kg / 30,000 kg Payload: 17,340 kg / 23,340 kg Unladen weight: 6,660 kg Overall length: 11,625 mm Platform length: 9,000 mm incl. 900 mm approach slope Loading height: 900 mm Large lashing package 40 mm drawbar Tyres: 235 / 75 R 17.5'' twin wheels without ABS, approval max. 60 km/h Electrical system 12 Volt, LED rotating beacon Bedpfx Ajllwhnjl Hsdb Ramps with spring lifts, ramp length 2,800 mm Vehicle from ongoing production – delivery lead time approx. 14 days. plus freight/preparation ex stock Wiesmoor €1,280.00 / net Towing vehicle LoF, agricultural or forestry registration Lease-purchase offer: term 48 months, residual value 40%, down payment only the VAT. Monthly rate: €599.00

Stanje: novo, lastna masa: 260 kg, skupna masa: 1.350 kg, dolžina tovornega prostora: 2.550 mm, širina tovornega prostora: 1.330 mm, Order from ANHÄNGERWIRTZ and pick up right in the heart of the Rhineland, between Cologne and Düsseldorf. Buy online – save big. Many other versions available from ANHÄNGERWIRTZ. Non-binding example: Category: Buy car trailers Vehicle data: Saris Mc Alu Pro DV135 black Gross vehicle weight: 1350 kg Payload: 1115 kg Internal dimensions (L x W x H): 255 cm x 133 cm x 43 cm External dimensions (L x W x H): 375 cm x 183 cm x 95 cm Tyres: 14" Standard equipment: Recessed lashing points 400 daN Hot-dip galvanized steel railing Bdodpfxjx Tzlzs Al Hjb Side walls made of multi-chamber black aluminium Fully supported floor plate External net hooks Jockey wheel Removable tailgate Floor plate enclosed in frame, made of Finnish birch plywood Frame components welded and hot-dip galvanized Vehicle documents included. Collection only from stock! Order by phone and have the ID number of this listing ready, or simply buy quickly and conveniently online – 24/7 – at trailershop.de. Mon. – Fri. 08:00 – 12:30 14:00 – 18:00 or shop around the clock at trailershop.de 01.26 DV135MCALUPROBLACK

Stanje: rabljeno, prva registracija: 01/2023, Leto izdelave: 2023, LANGENDORF 3-osni polni aluminijasti prekucni priklopnik za žito SKA 24/30 • ABS • EBS • ALCOA platišča • 3 x BPW osi z zračnim vzmetenjem • Dvigalni/spuščalni sistem • Nosilnost osi: 3 x 9.000 kg • Skupna dovoljena masa: 39.000 kg • Lastna masa: 6.080 kg • Nosilnost: 32.920 kg • Pneumatike: 385 / 65 R 22.5 • Profil pnevmatik: 80 - 90 % • Podest • Drsna ponjava • Skupna dolžina priklopnika: 10.500 mm Bdedpfx Alew Ix Ars Heb • Prostornina: 45 m³ - Tehnični pregled / TÜV SP: novo! Pridržane pravice do napak in vmesne prodaje! = Dodatne informacije = Za več informacij kontaktirajte Joannis Arpantzanis ali Kai Bühler.

Stanje: novo, skupna masa: 36.700 kg, konfiguracija osi: 3 osi, Oprema: ABS, Schwarzmüller RH240 Jumbo flatbed semi-trailer low loader extendable telescopic – for building material and construction machinery transport - NEW - UNUSED - gross vehicle weight: 36,000 kg empty weight: 10,340 kg Internal length approx. 13,570 mm = Front platform length approx. 3,950 mm Rear platform length approx. 9,620 mm Platform width at lower deck approx. 2,540 mm Loading height in the low-bed area (unladen) approx. 830 mm Frame: Extendable central frame welded construction Extension length 6,000 mm Pneumatic locking, operated from the trailer plus an additional position for a 40ft container in the low-bed area Reinforced design for building material transport, rated for 20 t on 5 m at the center of gravity and for machine transport up to 20 t Frame suitable for transporting timber construction parts L/W/H approx. 13,000/575/3,200 mm Reinforced frame for point loads at the front and rear with support block Reinforced outer frame in cranked platform, 6 mm Bedpfx Aou A Nilol Hodb Reinforced outer frame in the low-bed area, 6 mm Tapered crossmembers Sliding intermediate support approx. 300 mm (not removable), mechanically lockable, designed as stake pocket crossmember for box section stanchions 80x80 mm, as well as 1 pair of 5 t load securing rings integrated on the outside of the intermediate support Frame suitable for 2-axle tractor unit (SZM), saddle height (unladen) approx. 960 mm – 1,020 mm with air-suspended tractor Front: 3 pairs and rear: 10 pairs of 10 t lashing rings in the extendable outer frame, on both sides, can also be folded outward for oversize load securing 10 pairs of lashing mushrooms with welded-in round steel at the bottom outer frame Frame Equipment: 10 pairs of plug-in housings with reinforcement beams for box section stanchions 80x80 mm, on both sides of the outer frame 6 stake pocket crossmembers for box section stanchions 80x80 mm 24 steel box-section stanchions 80x80x5 mm, usable height approx. 2,000 mm, top with lashing holes for straps, hot-dip galvanized 3 pairs of container locks in the low-bed platform, retractable, for 1 x 20ft container 1 x 30ft container 1 x 40ft container when extended U-profile rail for ramp installation at rear frame end Support Device: Mechanical steel landing legs, 2 x 12 t 2 drop-down supports, both sides on rear frame Wheels: Tyres 205/65 R 17.5 Steel rims 6.00 x 17.5 Axles: SAF low loader axles with drum brakes Axle lift on 1st axle Axle spacing 1,310 + 1,410 mm Friction-steered SAF trailing axle, approx. 20° steering angle, electro-pneumatic reversing lock automatically activated in reverse gear Last axle steering Brake System/Suspension: Brake system manufacturer: Wabco Brake/air connections with 2 individual coupling heads yellow/red, EBS/ABS socket at front Air suspension with lifting/lowering device, total lift approx. 200 mm Automatic adjustment to programmed ride height from 15 km/h Assistance & Safety Systems: Standard reporting interval: every 15 minutes when ignition is on every 24 hours when ignition is off Axle load display via EBS-CANbus signal for display in cab (truck must be appropriately equipped) Wabco SmartBoard for data readout via display (mileage, axle load unit, brake diagnostics etc.) Floor: 35 mm larch wood flooring, impregnated on both sides, laid longitudinally with small gaps, over-wheel areas with steel chequer plate covering Front Wall: Fixed profiled steel front wall, approx. 2,700 mm high with 2 central supports 2 front corner posts

Stanje: novo, lastna masa: 260 kg, skupna masa: 1.350 kg, dolžina tovornega prostora: 2.550 mm, širina tovornega prostora: 1.330 mm, Order from ANHÄNGERWIRTZ and pick up right in the heart of the Rhineland, between Cologne and Düsseldorf. Buy online – save big. Many other versions available from ANHÄNGERWIRTZ. Non-binding example: Category: Buy car trailers Vehicle data: Saris Mc Alu Pro DV135 black Gross vehicle weight: 1350 kg Payload: 1115 kg Internal dimensions (L x W x H): 255 cm x 133 cm x 43 cm External dimensions (L x W x H): 375 cm x 183 cm x 95 cm Tyres: 14" Standard equipment: Recessed lashing points 400 daN Hot-dip galvanized steel railing Side walls made of multi-chamber black aluminium Fully supported floor plate External net hooks Jockey wheel Removable tailgate Floor plate enclosed in frame, made of Finnish birch plywood Frame components welded and hot-dip galvanized Vehicle documents included. Collection only from stock! Order by phone and have the ID number of this listing ready, or simply buy quickly and conveniently online – 24/7 – at trailershop.de. Mon. – Fri. 08:00 – 12:30 Bdodpfx Asx Sd Nmjl Hob 14:00 – 18:00 or shop around the clock at trailershop.de 01.26 DV135MCALUPROBLACK

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lift and lower system and RtR-valve * Smart Board installed on trailer as information tool (axle load display - separate for front and rear) * Tire pressure monitoring with display option in the truck via EBS signal without truck-side installation * Side underrun protection * Swivel supports at rear of chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight galvanized steel skirts with spray protection * Contour tape on sides and rear, reflective * 15-pin power plug * LED lighting 12 / 24 V * LED beacon (removable) at rear Bdjdpfx Ajtplwisl Heb * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, black powder coated, side right * Compartment in rotary frame for accessories with folding lid, 2 pcs. container locks permanently installed (directly after turntable platform) * ROBOT welded anti-slip coating on the steel plate of the rotary frame platform (protruding weld seams) * Load securing package consisting of: 2 lashing rings (13.4 t) at front left & right on front wall bearer, front & rear 1 pair of UVV lashing rings (13.4 t), and on each side 3 pairs of UVV lashing rings (10 t) pivotable and lowerable, loadable in all directions and embedded in the outer frame, each side with 3 stake pockets with simultaneous 2 t lashing option * 6 pairs mechanical folding outriggers for 3 m total width (not in the rear taper) * Extension boards stored in the middle of the loading area * Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm * Mechanically laterally adjustable * 4-way control block for later retrofitting of hydraulic ramp shift * Excavator arm storage over rear axle, continuous to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing rings LC 6400 daN in excavator arm storage at side in longitudinal frame * 2 steps galvanized at rotary frame left + right * Profifix lashing strip centered in longitudinal axis, in flat area for lashing up to LC 3000 daN * Chassis, turntable, folding outriggers, drop supports, and drive-on ramps hot-dip galvanized * Axles, slewing ring, air tank, tow bar painted in black tone * Loading edge loaded approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer warranty * Errors and intermediate sale excepted * Available approx. from week 22/2026 * Sample images