Schmid Mtt 890 Tieflader Mit Rampen nakup rabljenega (8.168)

Stanje: novo, lastna masa: 13.250 kg, največja dovoljena obremenitev: 47.550 kg, skupna masa: 60.800 kg, konfiguracija osi: > 3 osi, vzmetenje: zrak, velikost pnevmatike: 245/70 r17.5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings 30 mm thick hardwood flooring Extendable loading platform: Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8° 5 pairs of outward-folding lashing rings 3 pairs of outward-folding lashing rings 1 pair of flat lashing rings at the front of the loading area Cut-outs in the outer frame of the loading area for inserting tension straps Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Two-part steel ramps: One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering. Ramp with hydraulically folding and unfolding parts, hydraulic lifting system, and hydraulically adjustable position. Maximum load per pair: 40,000 kg Landing legs: JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tires: BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool Tires 245/70 R 17.5 Braking system: Braking system according to EU regulations with EBS-E (4S3M) without connecting lines to tractor unit Steel construction: Steel construction made from high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) Gujdpfx Aol Uxdkef Reg S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer High-quality one-color two-component (2K) top coat in Novagrau Rear section metallized and painted in RAL 9010 (pure white) Metallic paint not possible Electrical system: Electrical system according to EU regulations, lighting 24 volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Connections conforming to ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" kingpin One galvanized steel headboard approx. 400 mm high At the galvanized front connection strip, yellow-red air couplings 4 wheel chocks with holders at the headboard One spare wheel with holder in front of the headboard Electro-hydraulic power unit Rear and front remote steering via cable remote control with push-buttons, with single-track control of the axles Bracket at rear of gooseneck for ALU drive-on ramps European reflector signs (red-yellow) at trailer rear White reflective tape according to EU regulations at the sides, at the extension, and red at the rear At the gooseneck and on the ramps left and right, each with a holder for warning signs including socket One holder for beacon at trailer rear Galvanized folding supports under the loading platform chamfer Ramp operating valves fitted on the right side of the trailer Cover plates to bridge the gap between ramps and loading platform One mudflap at trailer rear Manual and description on USB stick Central lubrication system BEKAMAX (Pico) with general-purpose grease NLGI-2 and removable pump guard On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm The rear galvanized stakes are removable, superstructure length approx. 2,560 mm One INOX toolbox 1,350 x 400 x 400 on the gooseneck, box covers oil filler cap 4 pairs of WADER container pockets in the loading area for a

Stanje: rabljeno, največja dovoljena obremenitev: 4.500 kg, skupna masa: 6.500 kg, konfiguracija osi: 2 osi, prva registracija: 07/1979, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 1.900 mm, višina nakladalnega prostora: 380 mm, skupna širina: 2.500 mm, skupna višina: 3.000 mm, Leto izdelave: 1979,

Stanje: novo, največja dovoljena obremenitev: 14.904 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 1.050 mm, Leto izdelave: 2026, Oprema: ABS, WhatsApp HÜFFERMANN HAP 20.72 MultiCarrier Full Option, Arc-Galvanized!!! Equipment: Permissible gross weight: 18 t Technical gross weight: 20 t Unladen weight: approx. 5,096 t (+/- DIN tolerance) Dimensions Frame length: approx. 7,200 mm, internal container length: 6,000 – 7,000 mm + wheeled vehicles Total width max. 2,550 mm Container support height (in driving position): approx. 950 mm Type HPA 2072, twin tires Welded steel frame construction made from high-strength S700 steel Chassis configured for rear loading Load securing with pneumatic low-tension locking system with 4 claws, Clamping force 2.5 t per claw, operation at the trailer on the left side (direction of travel) 1 plug-in roller stop as a variable container stopper Integrated lashing rail on the outer frame for bolted lashing rings 6 pairs of lashing points in the front area of the outer frame Beveled approach at the rear with ramp storage compartment incl. steel plate cover Low-maintenance, sealed slewing ring Hook-in rail for aluminum drive-on ramps (WITHOUT RAMPS) 2 pairs of 5 t lashing rings mounted at the front on the platform, recessed in the rear floor 8 pairs of bolted 3 t lashing shackles on the outer frame, spaced approximately evenly Coupling Equipment Extendable drawbar, adjustable in 6 x 100 mm steps, with 40 mm DIN towing eye, straight eye, D-value 125 kN, for twin-tire chassis Drawbar retaining spring with tensioner Truck coupling height from 635 mm to 835 mm Drawbar length: 2,000–2,600 mm BPW EcoPlus low-loader axles with drum brakes, S-cam brakes 300/200 mm, axle load 10 t/axle, 17.5" Z tires, automatic brake adjusters 8 tires 235/75 R 17.5, 141J 8 steel rims 6.75 x 17.5, offset, silver Black plastic wheel nut caps Brake system complies with ECE Regulation R13 Two-line air brake system Gsdoyh Sl Dopfx Af Reug Brake system manufacturer: Wabco EBS system 4S3M, sensors on 1st and 2nd axle Electronic brake and stability system EBS-E and RSS or TEBS G2 and RSP Spring-loaded parking brake on 2nd axle Aluminium air tanks Brake/air connection lines with Duomatic quick couplers EBS/ABS connection cable Mount for EBS and electrical connectors at the coupling Air suspension with lift and lower function, operated separately front and rear via 2 rotary lever valves Automatic adjustment to programmed driving height above 15 km/h Schwarzmüller Intelligent Telematics Weight detection/axle load indication via EBS CAN bus signal for display in cab (truck must be prepared accordingly, not a calibrated scale) Tire pressure monitoring system according to ECE regulation 141, with pressure sensors in the wheels Acoustic reversing warning system/alarm, activated by reverse gear 24-volt lighting system according to ECE Regulation R48 Full LED multifunction tail lights "Aspöck EcoLED III" LED position lights at the front LED outline marker lights at the rear LED side marker lights, controlled via indicator signal LED license plate lights Connection cable 1 x 15-pin 2 LED work lights, mounted left and right under the outer frame 2 LED reversing lights, mounted rear left and right 7-pin socket at the rear Paintwork Shot-blasted, arc-galvanized, epoxy primer, final coating with 2K topcoat using electrostatic process Material doublings and transitions treated with cavity wax Chassis: RAL 9005 deep black Load securing elements: RAL 1003 signal yellow Drawbar/tow tube in drivi

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 8.000 kg, največja dovoljena obremenitev: 39.000 kg, skupna masa: 47.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 13.000 kg, dovoljena osna obremenitev (os 2): 13.000 kg, dovoljena osna obremenitev (os 3): 13.000 kg, prva registracija: 07/1983, dolžina tovornega prostora: 11.870 mm, širina tovornega prostora: 2.500 mm, vzmetenje: parabolično listje (vzmet), barva: bela, Leto izdelave: 1983, Polpriklopnik CTC ZA90SRT47 Nizkopodni 11,87 m s hidravličnimi rampami in vitlom (4,10 m + 7,35 m) 3 osi Parabolično vzmetenje Godpfx Aoy Axufjf Reug Dovoljena skupna masa 47.000 kg – nosilnost 39.000 kg Za specialne prevoze, dovoljena skupna masa kompozicije 56.000 kg Neto izvozna cena: 18.000,00 EUR Vse informacije brez garancije/ možnost napake pridržana.

Stanje: novo, lastna masa: 410 kg, največja dovoljena obremenitev: 1.590 kg, skupna masa: 2.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.010 mm, širina tovornega prostora: 1.530 mm, višina nakladalnega prostora: 1.200 mm, prostornina tovornega prostora: 5,4 m³, barva: drugo, gradbena višina: 1.740 mm, delovna širina: 2.040 mm, Manufacturer: Brenderup Model: Brenderup 2300S, 2300STB2000 Low-bed Trailer, Steel Permissible total weight: 2,000 kg, braked tandem Payload: 1,590 kg Unladen weight: 410 kg Box dimensions: 3,010 x 1,530 x 400 mm With 800 mm high mesh side extension Tyres: 13 inches Loading height: 540 mm With fold-down front wall 13-pin connector including overrun brake with reverse automatic Price includes registration documents (Certificate of Registration Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Unsinn, and Neptun Upon request, we provide a free transit license plate. We repair trailers of all manufacturers. Additional accessories available on request. Technical modifications, price changes, and errors excepted. No liability for errors or misprints. Features: Reverse automatic, rubber-cushioned axle, independent suspension, jockey wheel, marker lights, fully hot-dip galvanized frame, braked, includes warranty. Brenderup uses galvanized components for optimal corrosion protection, robust drop-latch fasteners, V-shaped safety drawbar, 6 internal lashing rings, braked, 13-pin plug with reversing light, protected multifunction rear lamp, 40 cm steel side panels, with 800 mm mesh side extension. Guedpfx Afouy Hwne Rjg

Stanje: novo, prevoženi kilometri: 50 km, moč: 324 kW (440,52 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: črn, vrsta prenosa: samodejen, skupna širina: 2.550 mm, dolžina tovornega prostora: 8.900 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.050 mm, Leto izdelave: 2026, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, MAN TGX 26.440 6x2 prevozniki strojev GM voznikova kabina z visokim stropom 2 ležišča Sončna maska Kamera za vzvratno ogledalo OptiView Klimatska naprava Hladilnik Stacionarno ogrevanje Navigacija Avtomatski menjalnik Varnostni paket Priklopni paket Rezervoar za dizel 590 l Polno zračno vzmetenje Sončna roleta Okenski zavese okoli kabine Infotainment sistem Radijska postaja Dovozna/krmiljena os itd. Nadgradnja za prevoz strojev in delovnih ploščadi Dolžina nadgradnje cca 8.900 mm (brez stranske skrinje) Višina nakladanja cca 1.050 mm Godpfjziv Srox Af Roug Podaljšane rampe Talna rešetka Stranske shranjevalne skrinje Velika notranja nerjaveča shranjevalna skrinja pred pregradno steno Vitel Hidravlične zadnje stabilizacijske noge Daljinsko upravljanje itd. Dodatne informacije na zahtevo.

Stanje: novo, prevoženi kilometri: 50 km, moč: 324 kW (440,52 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: črn, vrsta prenosa: samodejen, dolžina tovornega prostora: 8.900 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.050 mm, Leto izdelave: 2026, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, MAN TGX 26.440 6x2 prevoznik strojev GM kabina z visokim stropom 2 ležišči sončna zaslonka Mirrorcams OptiView klima hladilnik stacionarno ogrevanje navigacija avtomatski menjalnik varnostni paket priklopni paket dizelski rezervoar 590 l Gedpfeziv Slsx Af Rsug popolno zračno vzmetenje sončno rolo vseokoli zavesa infotainment radijska postaja sledenje/krmilna os iitd. Nadgradnja za prevoz strojev in dvižnih ploščadi Dolžina nadgradnje približno 8.900 mm (brez stranske omarice) Višina nakladanja približno 1.050 mm vlečne rampe rešetkasto dno stranske shranjevalne omarice velika notranja omarica iz nerjavečega jekla pred sprednjo steno vitlo hidravlične zadnje podporne noge radijsko daljinsko upravljanje itd. Dodatne informacije na zahtevo.

Stanje: novo, prevoženi kilometri: 50 km, moč: 324 kW (440,52 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: črn, vrsta prenosa: samodejen, skupna širina: 2.550 mm, dolžina tovornega prostora: 8.900 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.050 mm, Leto izdelave: 2026, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, MAN TGX 26.440 6x2 prevoznik strojev GM-kabina za voznika z visokim stropom 2 ležišči Sončna zaslonka Mirrorcams OptiView Klima naprava Hladilnik Pomožno gretje (standheizung) Navigacija Avtomatski menjalnik Varnostni paket Paket za prikolico Dieselski rezervoar 590 l Popolno zračno vzmetenje Senčilo za veter Okenska zavesa naokrog Infotainment Radijska postaja Dodatna/krmiljena os itd. Nadgradnja za transport strojev in delovnih ploščadi Dolžina nadgradnje cca 8.900 mm (brez stranske škatle) Višina nalaganja cca 1.050 mm Raztegljive klančine Tla iz rešetkaste pločevine Godpfx Afeziv Sfe Roug Stranska shranjevalna skrinja Velika notranja inox skrinja pred čelno steno Vitel Hidravlične zadnje opore Daljinsko upravljanje itd. Dodatne informacije na zahtevo.

Stanje: rabljeno, največja dovoljena obremenitev: 2.100 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/1996, Int. št.: B - 11 Po naročilu stranke Beyer * BMH 30.4 * Nizkopodna prikolica * Rampi * 2-osna * dovoljena skupna masa 3000kg * VLEČNA KLJUKA kroglični nastavek * dobro ohranjena, malo rabljena Možna menjava Financiranje od 3,99% Možnost napak in predhodne prodaje pridržana! Podatki v tem oglasu so neobvezujoči opisi in ne predstavljajo zagotovljenih lastnosti. Prodajalec ne prevzema nobene odgovornosti za napake pri vnosu in prenosu podatkov. Oprema iz oglasa je treba posebej preveriti. Vsi podatki v oglasih so neobvezujoči! Gujdpfjxvf Upox Af Rjg Dostava po celotni Nemčiji na zahtevo Odpiralni čas: Ponedeljek do četrtek: 9:00–17:00 Petek: 9:00–14:00 in po dogovoru!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 682 kg, največja dovoljena obremenitev: 2.318 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, največja hitrost: 100 km/h, Leto izdelave: 2026, ✅✅ IMMEDIATE DELIVERY ✅✅ INVOICE WITH VAT ✅✅ Scope of delivery: 1x Car transporter with winch, tilting function, and loading ramps, 3t Description: Gsdpfxoxny R Ne Af Rsug With an extremely low loading angle of 6 degrees, our car transporter is suitable for almost all sports cars and lowered vehicles. Car transporter trailer with winch, tilting function, and loading ramps. Thanks to the pre-installed 12m winch, you can easily load and transport vehicles that are not roadworthy. The tilting function, combined with additional loading ramps, allows for a low loading angle, making it easier to load vehicles with low ground clearance. The ramps are adjustable and safely stowed underneath the load area with a secure lock. Technical data: - Tiltable - Braked - Automatic jockey wheel - Plastic wheel chocks with holder - With winch - Plug holder - Welded frame Winch: Length: approx. 12 meters Pulling force: approx. 1135 kg / 2500 lb Rail dimensions: Width: approx. 30 cm Length: approx. 120 cm Gross weight: 3000kg Plug type: 13-pin Unladen weight: 682kg Payload: 2318kg Total length: 5996mm Total width: 2150mm Total height: 750mm Loading area length: 4490mm Loading area width: 2105mm Jockey wheel: Yes Brake: Yes Wheel chocks: Yes Shock absorbers: No (Available at extra cost: 199,- Euro for 100km/h upgrade) ✅ Immediately available ✅ ✅ All prices incl. VAT ✅ Scheduled delivery possible – please ask us +++ Pickup or inspection +++ ✅ Mon – Fri: 9 am - 7 pm ✅ Sat: 9 am - 2 pm

Stanje: novo, lastna masa: 1.200 kg, največja dovoljena obremenitev: 2.300 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 650 mm, prostornina tovornega prostora: 2,5 m³, vzmetenje: drugo, velikost pnevmatike: 185r14c, medosna razdalja: 990 mm, barva: drugo, Leto izdelave: 2021, Oprema: dvižna zadnja plošča, spojka prikolice, žerjav, Dollco Low Loader 3018/35, permissible total weight 3500 kg, payload approx. 2300 kg. Braked tandem axle. V-drawbar with heavy-duty jockey wheel. Loading area approx. 4000 x 1800 mm, usable area approx. 3000 x 1800 mm, drop sides 350 mm high made of aluminium. 13-pin electrics, lighting according to road traffic regulations (StVO). Gsdpsgffn Eofx Af Rjug Mounted HMF crane at the front, front extendable telescopic supports, rear telescopic supports for lowering. HMF crane type 270-K3, extendable up to 7 meters, 370° slewing range, lifting capacity ranging from 325 to 775 kg. The crane is powered by batteries; operation via stationary power unit is also available upon request. Size and lifting capacity can be offered in all variants as long as these are within the limits for a car trailer. Additionally, we can supply cranes for trucks or trailers in almost any size and weight. If you have any questions, feel free to contact us at any time.

Stanje: novo, lastna masa: 363 kg, največja dovoljena obremenitev: 1.137 kg, skupna masa: 1.500 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.570 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 300 mm, velikost pnevmatike: 195/50R13C, zavoro prikolice: prikolica s zavoro, AZ 2615 Single-Axle Utility Transporter All-Purpose High Loader Single-Axle Trailer Offer includes ramps and 30 cm side walls Technical Data: Permissible total weight: 1,500 kg Loading area: 257 x 150 cm Side wall height: 30 cm Loading height: approx. 63 cm Tyres: 195/50R13C Unladen weight with side walls: approx. 363 kg Payload: up to 1,137 kg Please note: The images depict the 10-inch chassis variant! Also available (special order, surcharges/discounts apply): Body sizes: 310 x 160 cm, 310 x 180 cm, or 330 x 180 cm Total weight: 1,000 / 1,350 / 1,800 kg Low-chassis, 10-inch wheels – loading height 56 cm (not available for 1,800 kg version) Side wall height: 40 cm Standard Build and Equipment (stock vehicle): 15 mm phenolic resin-coated anti-slip floor panel Frame with two heavy-duty longitudinal beams, fully welded and hot-dip galvanised Steel loading ramps, hot-dip galvanised, 245 cm long, full load capacity Ramp storage compartment with flap under loading bed Lateral chassis profiles with extendable lashing loops Additional lashing hooks under loading platform Maintenance-free axle assembly with independent wheel suspension V-drawbar with robust, centrally mounted automatic jockey wheel Multi-function tail lights and number plate fixed in protected rear cross-member Various Accessories Available (at extra cost, partly shown, prices on request): Aluminium ramps instead of steel 40 cm side walls instead of 30 cm Support legs Loading grille (H-frame) Mesh or steel sheet extension Aluminium side wall extension High tarpaulin – various heights and colours Gedpfxeywacto Af Roug Sliding tarpaulin – various heights and colours Shock absorbers, 100 km/h approval

Stanje: rabljeno, največja dovoljena obremenitev: 18.000 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/1991, dolžina tovornega prostora: 8.200 mm, širina tovornega prostora: 2.500 mm, Oprema: ABS, * ABS * BPW axles ----Superstructure: Low-loader trailer (2200+6000 mm), loading height approx. 900 mm, rear end tapered, drive-on height approx. 750 mm, steel/wood floor, extendable to 3 m width, spring-assisted loading ramps, lashing rings. Sale only to traders. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, PARTICULARLY REGARDING EQUIPMENT AND ACCESSORIES. All purchase contracts, invoices, pro forma invoices, orders, and sales discussions are subject to our General Terms and Conditions (see imprint for details). Gsdjwdb Ttspfx Af Roug

Stanje: novo, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 12.300 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Wiese 2-Axle Step Frame Platform Semi-Trailer with Fassi F545 Crane Mega Lowliner Chassis Welded construction with cross members, manufactured entirely from high-grade steel Neck height: approx. 220 mm including coupling plate Equipped with all necessary chassis reinforcements and cross connections Axles Godpfxsn Hrtgj Af Rjug 2 BPW axles, each with 10,000 kg load capacity, fitted with 17.5" drum brakes ABS: 1 axle monitored Axle spacing: 1,810 mm Tyres 8 units, type 235/75 R17.5 Rims Aluminium rims, 10-hole, hub-centric, offset = 122 mm Lighting System 24V lighting system in accordance with EU Directive 76/756/EEC and subsequent amendments, featuring: 2x2 three-chamber LED tail lights 1x LED reversing light 1x LED fog light LED side marker lights Lane departure lights Number plate illumination 2x 7-pin sockets + 1x 15-pin socket wired as per EU standard Floor Galvanised grating floor in the low-bed area Steel chequer plate in axle area Load Securing Outer frame with D030 mm lashing hole profile on the bevel 2x12 lashing points, 8,000 daN in the outer frame 3 rows of combo stake pockets for 80x80 mm insert stakes in the low-bed area Accessories 2x wheel chocks with holder Spare wheel carrier winch 2x toolboxes with slide-out drawer (for chain storage) Surface Protection Steel structure: blasted and primed Paint Finish Chassis/frame/floor frame: single colour in RAL 3020 (traffic red) Axle hubs: single colour in RAL 3020 (traffic red) Axles: KTL-coated black Rims: Aluminium Durabright With Fassi F 545 RA.2.28 XE-Dynamic Hydraulic outriggers Additional stabiliser beams 360° working range Approx. 90% lifting capacity towards the front For further information please do not hesitate to contact us.

Stanje: novo, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 12.300 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Wiese 2-axle stepframe semi-trailer in telescopic version with Fassi F545RA.2.26 crane Mega lowliner as stepframe semi-trailer. Gsdpfsyihgyox Af Reug Chassis Welded construction with cross members made entirely of high-grade steel Neck construction reinforced for front-mounted crane Axles 2 BPW axles with 10,000 kg capacity each, drum brakes 17.5" ABS: 1 axle with sensor Axle spacing: 1,810 mm Both axles with forced steering Tyres 8x 235/75 R17.5 Wheels Aluminium rims, 10-hole, hub-centric, ET= 122 mm Lighting system 24V lighting system in accordance with EU Directive 76/756/EEC and subsequent amendments, featuring: 2x2 triple-chamber LED tail lights 1x LED reversing light 1x LED fog lamp LED side marker lights Lane marker lights Number plate illumination 2x 7-pin + 1x 15-pin sockets wired to EU standards Floor Phenolic-coated plywood floor Steel chequer plate over axle area Load securing Outer frame with lashing hole profile, D030 mm, angled 2x12 lashing points, 8,000 daN, in the outer frame 3x rows of combi stake pocket sleeves for 80x80 mm posts in the lowbed area Accessories 2x wheel chocks with holders Spare wheel carrier winch 2x toolboxes with sliding drawer (for chain storage) etc. Crane: Fassi F 545 RA.2.26 XE-Dynamic Hydraulic outriggers Additional stabiliser beams 360° working range Approx. 100% outreach to the front The attached images are sample images. We manufacture crane trailers in various configurations. For further information, feel free to contact us. On request, we will provide you with a customized offer based on your required specification.

Stanje: novo, prevoženi kilometri: 100 km, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: > 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 9.000 mm, širina tovornega prostora: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, klimatska naprava, navigacijski sistem, parkirni grelec, 4-axle Volvo machinery transporter / aerial work platform transporter • FH 500 8x2R • Trailing axle, electro-hydraulically steered, single tires • Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle • FH long-distance safety cab • Cab parking heater, 2 kW • 33 l refrigerator with freezer compartment, under bunk • Air suspension on front axle(s) • Gearbox / I-Shift operation via driver seat control unit • I-Shift drive modes: Standard, Performance, and Economy • I-See with map-based topography and traffic information • Eco cruise control (cruise control), including brake cruise control • Manual shifting possible in automatic mode (including kickdown) • Adaptive traction control • Adaptive cruise control (ACC) with collision warning and emergency braking function • Lane departure warning system • Side collision avoidance and turning assistant (both sides) • Driver alert system, warns of drowsiness • VEB Volvo Engine Brake • etc. WIESE superstructure for aerial platform and construction machinery transport with hydraulic loading ramps With 2 pairs of wheel recesses including covers Superstructure dimensions: - Approx. 9,050 mm usable length - External width 2,550 mm - Loading height (top of floor) approx. 1,050 mm unloaded - Robust, weight-optimized steel welded construction, high-volume design - Short crossmember spacing for high point loads - Rear end beveled for low approach angle - Outside frame profile 90° - Front bulkhead reinforced - Storage box inside lower front bulkhead - Grating floor - Designed for 5,000 daN wheel load - Steel storage boxes above the axles and outer frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed in outer frame Gsdpfx Ajw Itmrof Reug - Longitudinal beams each with Multi-X contour over whole length with multiple lashing points 2.5 t - 4 lashing eyes 8 t recessed at rear (left/right/center/center) - 4 lashing eyes 8 t recessed in front bulkhead (left/right/center/center) - Outside frame profile 90° Loading ramps: Type: WFB 20 S-2 Capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramp design as 2 individual / telescopic ramps, both ramps are laterally adjustable - Ramp can be used as a loading ramp and as a drive-over ramp for warehouse technology (telescopic section remains closed), the fixed ramp part is laid onto the dock ramp - Sturdy tension bar as transport lock (alternative with belt tensioning) - 2 hydraulic rear supports with plates, with audible warning and control light in cab - Ramp and supports operated via electro-hydraulics - Remote control operation and emergency control at control block - Control block installed in stainless steel toolbox at frame side - Superwinch 8.2 t with approx. 20 m steel cable - Access with handholds left and right for loading area walk-on - 5 stainless steel drawer-type toolboxes, including lighting as optional extra - Side paneling as per sample images (green vehicle), available as option for extra cost - Superstructure coating KTL - Ball head trailer coupling at rear, 3.3 t - 4 LED work lights - 2 LED rear lights mounted at top of front bulkhead - 4 external LED work lights on frame for area lighting - 2 LED work lights at rear - 1 removable rotating beacon at rear Stock vehicle comes with cab in white and superstructure in nova grey (external frame painted in RAL color of your choice upon request)

Stanje: novo, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 12.300 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Wiese 2-Axle Step Frame Platform Semi-Trailer with Fassi F545 Crane Mega Lowliner Chassis Welded construction with cross members, manufactured entirely from high-grade steel Neck height: approx. 220 mm including coupling plate Equipped with all necessary chassis reinforcements and cross connections Axles 2 BPW axles, each with 10,000 kg load capacity, fitted with 17.5" drum brakes ABS: 1 axle monitored Axle spacing: 1,810 mm Tyres 8 units, type 235/75 R17.5 Rims Aluminium rims, 10-hole, hub-centric, offset = 122 mm Lighting System 24V lighting system in accordance with EU Directive 76/756/EEC and subsequent amendments, featuring: 2x2 three-chamber LED tail lights 1x LED reversing light 1x LED fog light LED side marker lights Lane departure lights Number plate illumination 2x 7-pin sockets + 1x 15-pin socket wired as per EU standard Floor Galvanised grating floor in the low-bed area Steel chequer plate in axle area Load Securing Outer frame with D030 mm lashing hole profile on the bevel Gedpfst Izpyex Af Reug 2x12 lashing points, 8,000 daN in the outer frame 3 rows of combo stake pockets for 80x80 mm insert stakes in the low-bed area Accessories 2x wheel chocks with holder Spare wheel carrier winch 2x toolboxes with slide-out drawer (for chain storage) Surface Protection Steel structure: blasted and primed Paint Finish Chassis/frame/floor frame: single colour in RAL 3020 (traffic red) Axle hubs: single colour in RAL 3020 (traffic red) Axles: KTL-coated black Rims: Aluminium Durabright With Fassi F 545 RA.2.28 XE-Dynamic Hydraulic outriggers Additional stabiliser beams 360° working range Approx. 90% lifting capacity towards the front For further information please do not hesitate to contact us.

Stanje: novo, največja dovoljena obremenitev: 36.937 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer Lowbed Trailer with Hydraulic Gooseneck Available Immediately! Gjdpfxow Nlzqe Af Rjug TECHNICAL SPECIFICATIONS: * Fifth wheel height: 1,250 mm * Overall length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Platform height: 875 mm * Wheelbase: 8,480 mm * Axle spacing: 1,360 mm * Axle load: 30,000 kg * BPW axles with air suspension and drum brakes, 10 t load capacity * Unladen weight: 11,063 kg * Overall width: 2,550 mm * Permissible total weight (60 km/h): 52,800 kg * Permissible total weight (80 km/h): 48,000 kg CHASSIS: * 2x rigid front axles, 1x trailing steering axle at rear * Load-dependent manual axle lift system on the 1st axle * Tyres: 12x 245/70R17.5 * Air suspension, 1x load gauge FRAME: Made of high-quality, high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost landing legs at the front * Folding support legs at the rear * Grating floor RAMP: * Loading ramp capacity: 40 t * 2x hydraulic ramps, suitable for hydraulic sliding/folding operation, galvanized steel surface, 4,200 mm long and 850 mm wide, 9° ramp angle, 40,000 kg capacity and 3,510 mm height in closed position * Hydraulic gooseneck ramp, 2,800 mm long, 10° angle LOAD SECURING: * Lashing rings: 6x2 on gooseneck (6 t capacity), 6x2 on platform (6 t capacity), 8x2 on the outer frame (6 t capacity) * 8x2 stake pockets MISCELLANEOUS: * 1x rotating beacon * 1x work light * 2x2 wide load signs with lighting * SmartBoard Feel free to contact us for further information.

Stanje: novo, prevoženi kilometri: 100 km, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: > 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 9.000 mm, širina tovornega prostora: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, klimatska naprava, navigacijski sistem, parkirni grelec, 4-axle Volvo machine transporter / work platform transporter • FH 500 8x2R • Trailing axle, electro-hydraulically steered, single tires • Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle • FH long-distance safety cab • Cab auxiliary heater, 2 kW • 33 l coolbox with freezer compartment under bunk • Air suspension on the front axle(s) • Transmission/I-Shift operated via control unit on driver's seat • I-Shift drive modes: Standard, Performance, and Economy • I-See with map-based topographical and traffic data • Eco Cruise Control (cruise control) including brake cruise control • Manual gear selection possible in automatic mode (incl. kickdown) • Adaptive Traction Control • Adaptive Cruise Control (ACC) with collision warning & emergency braking • Lane Keeping Assist • Side collision avoidance & turn assist (both sides) • Driver alertness warning system for fatigue • VEB Volvo Engine Brake • etc. WIESE bodywork for aerial platform and construction machinery transport with hydraulic loading ramps with 2 pairs of wheel recesses incl. wheel recess covers Body dimensions: - Usable length approx. 9,050 mm - External width 2,550 mm - Platform height (top of floor) approx. 1,050 mm unladen - Robust, weight-optimized steel welded construction, box-type design - Short crossmember spacing for high point loads - Rear end beveled for low approach angle - External frame profile 90° Guedpew Itmlsfx Af Rog - Bulkhead in reinforced design - Internal storage box at bottom in front of bulkhead - Grating floor - Designed for 5,000 daN axle load - Above axles: steel toolboxes & outer frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 tonnes, flush-mounted in outer frame - Longitudinals each with Multi-X contour along the entire length, many lashing points 2.5 tonnes - 4 lashing eyes 8t at the rear, recessed (left/right/center/center) - 4 lashing eyes 8t at front bulkhead, recessed (left/right/center/center) - Outer frame profile 90° Loading ramps: Type: WFB 20 S-2 Capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramp design as 2 individual/split ramps, both ramps laterally adjustable - Ramp can be used as a loading ramp or as a drive-over ramp for warehouse technology (sliding part remains closed), fixed ramp section placed on hall ramp - Heavy-duty locking bar for transport security (optional with strap lock) - 2 hydraulic rear supports with plates incl. warning buzzer & indicator light in cab - Ramps and supports operated by electro-hydraulics - Control via radio remote and emergency control at control block - Control block mounted in stainless steel toolbox at side of frame - Superwinch, 8.2 t, with approx. 20 m steel cable - Access steps with handrails left and right for cargo area access - 5 stainless steel drawer-type toolboxes, incl. lighting (option, at extra cost) - Side fairings as per sample images (green vehicle), option at extra cost - Body coating KTL - Rear tow hitch (ball), 3.3t - 4 LED work spotlights - 2 LED rear lights mounted high on bulkhead - 4 LED external work lights on frame for area illumination - 2 LED work lights at rear - 1 removable rotating beacon at rear The stock vehicle is supplied with cab in white and body in nova grey (outer frame painted to RAL color by request).

Stanje: novo, največja dovoljena obremenitev: 36.937 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer Lowbed Trailer with Hydraulic Gooseneck Available Immediately! TECHNICAL SPECIFICATIONS: * Fifth wheel height: 1,250 mm * Overall length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Platform height: 875 mm * Wheelbase: 8,480 mm * Axle spacing: 1,360 mm * Axle load: 30,000 kg * BPW axles with air suspension and drum brakes, 10 t load capacity * Unladen weight: 11,063 kg * Overall width: 2,550 mm * Permissible total weight (60 km/h): 52,800 kg * Permissible total weight (80 km/h): 48,000 kg CHASSIS: * 2x rigid front axles, 1x trailing steering axle at rear * Load-dependent manual axle lift system on the 1st axle * Tyres: 12x 245/70R17.5 * Air suspension, 1x load gauge FRAME: Made of high-quality, high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost landing legs at the front * Folding support legs at the rear * Grating floor RAMP: * Loading ramp capacity: 40 t * 2x hydraulic ramps, suitable for hydraulic sliding/folding operation, galvanized steel surface, 4,200 mm long and 850 mm wide, 9° ramp angle, 40,000 kg capacity and 3,510 mm height in closed position * Hydraulic gooseneck ramp, 2,800 mm long, 10° angle LOAD SECURING: * Lashing rings: 6x2 on gooseneck (6 t capacity), 6x2 on platform (6 t capacity), 8x2 on the outer frame (6 t capacity) * 8x2 stake pockets MISCELLANEOUS: * 1x rotating beacon * 1x work light * 2x2 wide load signs with lighting * SmartBoard Gusdjyhi H Iepfx Af Rjg Feel free to contact us for further information.

Stanje: novo, prevoženi kilometri: 100 km, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: > 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 9.000 mm, širina tovornega prostora: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, klimatska naprava, navigacijski sistem, parkirni grelec, 4-axle Volvo machine transporter / work platform transporter ▪ FH 500 8x2R ▪ Trailing axle, electro-hydraulically steered, single tires ▪ Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle ▪ High-roof long-distance safety cab FH ▪ Cab auxiliary heater, 2 kW ▪ 33 l cool box with freezer compartment, under bunk ▪ Air suspension on front axle(s) ▪ Transmission / I-Shift control via operator panel on driver's seat ▪ I-Shift driving modes: Standard, Performance, and Economy ▪ I-See with map-based topography and traffic information ▪ Eco cruise control (cruise control), including brake cruise control ▪ Manual shifting possible in automatic mode (incl. kickdown), adaptive traction control ▪ Adaptive cruise control (ACC) with collision warning and emergency braking function ▪ Lane keeping assist ▪ Side collision avoidance and turn assist (both sides) ▪ Driver alert system for drowsiness warnings * VEB Volvo Engine Brake * etc. WIESE body for work platform and construction machinery transport with hydraulic loading ramps with 2 pairs of wheel recesses including covers Body dimensions: - Length approx. 9,050 mm usable length - External width 2,550 mm - Loading height on upper edge floor approx. 1,050 mm unladen - Robust, weight-optimized steel welded structure, box-type construction - Short crossmember spacings for high point loads - Rear end beveled for low approach angle - External frame profile 90° - Bulkhead in reinforced version - Internal bottom tool box in front of bulkhead - Grating floor - Suitable for wheel loads of up to 5,000 daN - Above the axles: steel plate tool boxes and outer frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed into external frame - Longitudinal members with Multi-X profile along the entire length with numerous lashing points, 2.5 t - 4 lashing eyes 8 t recessed at the rear (left/right/center/center) - 4 lashing eyes 8 t recessed at the front bulkhead (left/right/center/center) - External frame profile 90° Ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Gedsw Itl Uepfx Af Rsug Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramp design: 2 individual/stretch ramps, both laterally adjustable - Ramps can be used as drive-up ramps or bridging ramps for warehouse technology (stretch section remains closed), fixed ramp section placed on dock ramp - Sturdy tension bar as transport safety (alternatively with strap tensioning) - 2 hydraulic rear supports with footplates, warning buzzer and indicator light in cab - Ramp and support operation via electro-hydraulic system - Control by radio remote or manual emergency controls on switch block - Switch block mounted in stainless steel toolbox on the frame side - Superwinch 8.2 t with approx. 20 m steel cable - Access steps with grab rail on right and left for walking onto loading area - 5 stainless steel drawer-type tool boxes, with optional lighting available at extra cost - Side skirting as shown in sample images (green vehicle), available as an option at extra cost - KTL coating for the superstructure - Spherical trailer hitch at rear, 3.3 t - 4 LED work lights - 2 LED reversing lights mounted high on bulkhead - 4 LED work lights externally mounted on the frame for area illumination - 2 LED work lights at the rear - 1 removable rotating beacon at the rear Stock vehicle is supplied with cab color in white and body in nova grey (exterior frame painted in RAL color of y

Stanje: novo, največja dovoljena obremenitev: 36.937 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer Low Loader with Hydraulic Gooseneck Available Immediately! TECHNICAL DATA: * Saddle height: 1,250 mm * Overall length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Platform height: 875 mm * Wheelbase: 8,480 mm * Axle spacing: 1,360 mm * Axle load: 30,000 kg * BPW axles with air suspension and drum brakes, 10-ton load capacity * Unladen weight: 11,063 kg * Overall width: 2,550 mm Gusdsw Ii A Aopfx Af Rsg * Permissible gross weight (60 km/h): 52,800 kg * Permissible gross weight (80 km/h): 48,000 kg CHASSIS: * 2x fixed front axles, 1x trailing steering axle at the rear * Overload-dependent manual axle lift system on the 1st axle * Tyres: 12x 245/70R17.5 * Air suspension, 1x load pressure gauge FRAME: Made from high-quality and high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost landing legs at the front * Foldable supports at the rear * Grated floor RAMP: * Ramp capacity: 40 tonnes * 2x hydraulic ramps, suitable for hydraulic sliding/folding operation with galvanized steel surface, 4,200 mm length and 850 mm width, 9° ramp angle, load capacity 40,000 kg and 3,510 mm height when closed * Hydraulic gooseneck ramp, 2,800 mm long, 10° angle LOAD SECURING: * Lashing rings: 6x2 on gooseneck with 6-ton capacity, 6x2 on platform with 6-ton capacity, 8x2 on the outer frame with 6-ton capacity * 8x2 stake pockets OTHER FEATURES: * 1x rotating beacon * 1x work light * 2x2 oversize signs with lighting * SmartBoard For further information, we are happy to assist you.

Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * KA-TA-RT 18.0: ----Braking System: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, including RtR valve and manual lowering for loading operations ----Drawbar / Flange Drawbar Eye: * Drawbar with positive-locking height adjustment * 50 mm flange drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V integrated in underrun protection ----General Attachments: * Landing gear at the front * Fold-out support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Plastic quarter mudguards ----Tipper Body: * Steel 3-way tipper body made of fine-grain steel with high M-Strong side walls and reinforced 180 bar tipping cylinder * Fixed front wall, smooth sheet steel * Hardwood pad for excavator bucket bolted to front wall * Continuous, folding drop sides without central stanchion, with sideboard spring assist and manual central locking system * Screwed-in rear stanchions * Combination steel swing doors, asymmetrical 2-leaf rear wall, can be swung and locked at 270°, not foldable, with additional swinging frame for automatic rear wall opening during tipping, locking via galvanized rotary bar lock and central locking system, deactivation function for automatic rear wall opening when tipping reverse with open swing doors * 4 mm steel floor plate Guodpjvin T Ssfx Af Reg * Two-step entry left front * Rear mounting rail for loading ramps ----Load Securing: * 1 x 7 t lashing ring in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Loading Ramps: * Integrally mounted ramp storage at the rear of the chassis * 1 pair of aluminum loading ramps (10 t / pair) approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipping platform, underrun protection, rear folding supports hot-dip galvanized * Sideboard paintwork in RAL custom color (with exceptions for special or metallic paintwork); can be changed up to approx. 6 weeks prior to delivery * Axles, air tanks, flange drawbar eye, front landing gear painted in black ----Information: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. CW 45 / 2026

Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * KA-TA-RT 18.0: ----Brake: * EBS (Electronic Braking System) * Emergency release for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering device, including Ride-Through-Release (RtR) valve and manual lowering function for loading ----Drawbar / Flanged Drawbar Eye: * Drawbar with positive-locking height adjustment * 50 mm flanged drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V fitted in underrun protection ----General Attachments: * Support winch at front * Fold-away rear support legs on the outside * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on right side * Plastic quarter mudguards ----Tipping Body: * Steel pallet – 3-way tipper body made of high-tensile fine grain steel with high M-Strong side panels and reinforced 180 bar tipping cylinder * Fixed front wall made of smooth sheet steel * Hardwood strip for excavator bucket screwed onto front wall * Continuous side panels – fold-down without center pillar, with sideboard spring-assist lifters and swinging function via manual central locking * Bolt-on rear stanchions * Combination steel swing doors at rear, 2-leaf, asymmetrically split, able to swing open 270° and lockable (not foldable), including additional swinging frame for automatic rear door opening when tipping; locking by galvanized rotating bar lock and central locking, deactivation function for automatic rear door opening when tipping backwards with opened swing doors * 4 mm steel floor plate * Two-step access on the left front * Rear ramp track for loading ramps ----Load Securing: * One 7 t lashing ring in each corner Gsdpsvin Ucofx Af Rsug * Four 3 t lashing eyes recessed in the outer frame on each side ----Loading Ramps: * Recessed ramp compartment at rear of chassis * 1 pair aluminium loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipping platform, underrun protection, and rear supports hot-dip galvanized * Sideboards painted in any desired RAL colour (excluding special or metallic paints), can be changed up to approx. 6 weeks before completion * Axles, air tanks, flanged drawbar eye, and front support winch painted in black ----Info: * --Load securing certificate according to EN 12642 XL? * Errors and intermediate sale reserved ----Delivery Time: * Available from approx. CW 45 / 2026

Stanje: rabljeno, lastna masa: 6.560 kg, največja dovoljena obremenitev: 18.440 kg, skupna masa: 25.000 kg, konfiguracija osi: 2 osi, prva registracija: 09/2017, dolžina tovornega prostora: 13.700 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 850 mm, medosna razdalja: 7.500 mm, barva: modra, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, dodatne luči, zavorni sistem na stisnjen zrak, * German semi-trailer * Very good visual condition, see photos * 2-axle low loader, Jumbo TO 152 DE * Loading platform: length 13,700 mm x width 2,540 mm * Loading height approx. 850 mm * Stake pockets * Multilock system Godpfx Afjxu Nnwo Rjug * Wooden loading floor * Winch with cable remote control 15,000 lbs * Long aluminium loading ramps 3,000 x 400 mm, laterally adjustable * ROR axles * Air suspension * Haacon spindle supports * ABS + EBS * Work lights * Spare wheel * Toolbox * Brake drums * Wheelbase: 7,500 mm + 1,250 mm * Permissible gross weight up to 27,200 kg * Unladen weight 6,560 kg * Payload up to 20,640 kg If a new TÜV inspection is required, we are happy to provide an offer through our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV, without new SP, without new UVV. Further trucks can be found on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods to ensure there are no misunderstandings regarding condition and suitability. Inspection and viewing are possible at any time by prior appointment and are expressly desired. All information is provided without guarantee. We accept no liability for errors or inaccuracies in the offer. The buyer is obliged to independently inspect the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.