Reisch 25M³ Kiprski Polpriklopnik Z Zunanjimi Vrati nakup rabljenega (42.684)

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 940 mm, Leto izdelave: 2026, Oprema: ABS, JUMBOPLATEAU SATTEL KÄSSBOHRER 3-achs K.SPJ3 12/27 / JUMBO / BPW / LIFTACHSE fabrikant/hersteller: KÄSSBOHRER EZL: NEUFAHRZEUG Masse: 13.620 x 2.480 x 940 mm Zulässiges Gesamtgewicht: 36.000 kg Kedeyi I Efepfx Alnjdu Leergewicht: 5.700 kg Aufliegelast: 12.000 kg Luftfederung, zum Heben/Senken Trommelbremsen Ersatzradhalterung ABS EBS AGS Achsfabrikat: BPW ECO Trommel Liftachse Siebdruckboden Zurringe Werkzeugkasten Lackierung Aufbau: MB 7350 Lackierung Chassis: MB 7350 Bereifung: 12-fach Reifenzustand: 100 % Bereifung HA 235/75 R17,5 Maße Ladefläche hinten: 9.600 mm, vorne: 4.065 mm 13 Paar stabile, versenkte Zurringe, je 4 t / + 11 Paar im Außenrahmen Vorne: 15 + 2 x 7-pol. Dose (Licht) Ladedruckmanometer Maße: min. Höhe 870 mm / normal 940 mm / max. 1.010 mm Alle Angaben ohne Gewähr, Zwischenverkauf vorbehalten! Sollten Sie Fragen zu diesem oder anderen Fahrzeugen haben, rufen Sie uns an. If you have any questions for this or any other trailer/car, please call us.

Stanje: rabljeno, največja dovoljena obremenitev: 19.080 kg, skupna masa: 28.480 kg, konfiguracija osi: 2 osi, prva registracija: 08/2025, naslednji pregled (TÜV): 08/2026, POZOR: upravljati samo s kipo hidravliko! BPW 10t osi, 2 krmiljeni osi, POZOR: upravljati samo s kipo hidravliko! Višina sedla 1,25 m, POZOR: upravljati samo s kipo hidravliko! Višina sedla 1,25 m, hidravlično 1400x700 + ročno 700, Kdjdpfxjykgkcs Alneu

Stanje: rabljeno, lastna masa: 6.460 kg, skupna masa: 29.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2013, dolžina tovornega prostora: 13.480 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.800 mm, prostornina tovornega prostora: 94 m³, velikost pnevmatike: 385/55 R22,5, medosna razdalja: 1.910 mm, barva: bela, Oprema: ABS, EBS Disc brakes Payload 22,540 kg Air-lift suspension Last axle with forced steering DC axles Lifting and lowering device Kjdsuu Rv Nepfx Alnjdu Subject to errors and omissions

Stanje: novo, največja dovoljena obremenitev: 25.645 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details available upon request. Loading Platform: - Low-bed with central beam in extendable design, length approx. 6,750 mm - 5 pairs of lashing rings, foldable outwards (LC 5,000 daN) - 1 pair of lashing rings, foldable outwards (LC 10,000 daN) - 1 pair of flush-mount lashing rings at the rear of the loading platform (LC 10,000 daN) Gooseneck: - Gooseneck hydraulically lift/lowerable and detachable Rear Running Gear: - Rear running gear in short version with closed outer frame and tread plate cover Kodpfxsxf Silo Alnjdu - Running gear with excavator trough, trough rear half enclosed for housing air tanks - 2 pairs of lashing rings, foldable outwards (LC 5,000 daN) - 1 pair of lashing rings, foldable outwards (LC 10,000 daN) - 1 pair of flush-mount lashing rings at the rear of the running gear (LC 10,000 daN) Axles: - BPW axles, hydromechanically forced steering - Air suspension with lifting and lowering valve Tyres: - Tyres 245/70 R 17.5 3PMSF - TPMS: tyre pressure monitoring system as per ECE R 141 Brake System: - Wabco braking system in compliance with EU regulations with EBS-E (2S2M) Paintwork: - High-quality 2-component (2K) top coat, single colour RAL 3000 flame red Includes the following additional equipment: - 2 king pins - One galvanised steel front wall, approx. 400 mm high - Remote steering adjustment from front and rear via cable remote control with pushbuttons, including single-track axle alignment (without installation in the tractor unit) - Electro-hydraulic unit - Axle load gauge including axle load diagram - On the gooseneck, aluminium side boards and rear wall, plug-in type, approx. 2,440 x 400 mm (L x H). The rear galvanised plug-in stanchions are removable. (Upper body length approx. 2,560 mm) - Separate air connection with blow gun on the gooseneck - 2 work lights with switch on the trailer, mounted on left and right sides of the gooseneck platform - One INOX toolbox, approx. 1,350 x 400 x 400 mm, mounted on the gooseneck - 6 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform, 2 pairs in the rear frame of the running gear - Galvanised, extendable load width extensions approx. 230 mm per side - Hydraulic connections from the gooseneck to the low-bed with multi-coupling instead of screw couplings. No guarantee on seals. - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2 with removable pump protection - 2 pairs of WADER container pockets in the loading platform, for 1x 20’ container - One removable galvanised intermediate platform with 1 pair of WADER container pockets - 1 pair of steel ramps to bridge over the low-bed’s loading hooks - Loading platform with painted sand layer as anti-slip protection - HRM metallization (High Resistance Metallization)

Stanje: novo, največja dovoljena obremenitev: 90.700 kg, skupna masa: 126.000 kg, konfiguracija osi: > 3 osi, skupna širina: 2.850 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: Hydraulically lift/lower and detachable gooseneck. Length approx. 3,650 mm. Suitable for tractor units: 6x4 or 8x4 3-axle compact front bogie: * Hook mounts at front and rear. Length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Lowbed: * ATX-A lowbed with telescopic longitudinal beams in low-profile design, fixed hardwood floor approx. 50 mm thick * With drive-over bridge hooks at the front and bolt-lug coupling at the rear * Base width: approx. 2,850 mm, length: approx. 7,150 mm, beam height: approx. 330 mm, beam width: approx. 750 mm * Loading height approx. 480 mm, ground clearance approx. 150 mm 5-axle rear bogie: * Mechanical bolt-lug coupling for attaching a lowbed at the front; rear end traverse * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * Pendulum axle 3-axle front bogie: * PENDULUM AXLES, all axles hydro-mechanically forced-steered * Hose rupture valve on axle leveling cylinder with automatic RESET function * Hydraulic cylinders with shutoff taps and locking pins for securing in raised position * Final painting of axles with 2 coats of single color 2K paint, painted in MB7350 Novagrau * Rated axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Tires for front bogie: 12 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J 5-axle rear bogie: * PENDULUM AXLES, all axles hydro-mechanically forced-steered * Hose rupture valve on axle leveling cylinder with automatic RESET function * Hydraulic cylinders with shutoff taps and locking pins for securing in raised position * Final painting of axles with 2 coats of single color 2K paint, painted in MB7350 Novagrau * Rated axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Tires for rear bogie: 20 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J Paintwork: Kdsdsw Tgp Djpfx Alnju * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimum corrosion protection * Final painting with 2 coats of 2K topcoat, single color in RAL 3002 Carmine Red, according to RAL-System 841GL Including accessories: * Steel front wall, approx. 400 mm high * Plug-in aluminum side and rear boards on gooseneck, approx. 400 mm high, anodized * 3.5" kingpin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connections on gooseneck * Front bogie with separate air connection for air impact wrench * BEKA-MAX central lubrication for one 3-axle bogie * Preparation for bolt-on container positioning for 1 x 20' or 1 x 30' on the outer beams * Without container locks * Brackets on the outer beams for installing foldable extensions * One 7-pin socket left and right, front and rear on rear bogie for warning panels * BEKA-MAX central lubrication for one 5-axle bogie * On the rear bogie, socket for cable remote control for steering * Rear bogie with trough * 2 LED reversing lights mounted on rear panel * European reflector boards (red-yellow) on the rear * One mudflap at rear * One LED beacon with bracket left and right on rear cross-member * Two INOX toolboxes 855 x 340 x 390 mm on gooseneck, left and right * 1-circuit...

Stanje: novo, lastna masa: 9.300 kg, največja dovoljena obremenitev: 30.100 kg, skupna masa: 39.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Extendable loading platform: - Loading platform, extendable execution with rear bevel approx. 1,000 mm x 8° - 5 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - Cutouts in the outer frame of the platform for attaching tie-down straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tyres: - BPW axles, hydro-mechanically forced steering - Technical axle load: 12,000 kg - Air suspension with raise/lower valve - Axle tool kit - TPMS tyre pressure monitoring system according to ECE R 141 - Tyres: 235/75 R17.5 3PMSF Accessories included: - 2" kingpin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection strip - 2 wheel chocks with holder on the front wall - One spare wheel with holder in front of the front wall - Electro-hydraulic unit - Rear axle steering, operable from front and rear via cable remote control with push buttons, with axle single-track monitoring Kedpfx Asyxc Eyolnjdu - European reflective warning plates (red-yellow) at the rear of the trailer - White reflective tape according to EU regulations on the sides and on the extension, red at the rear - Gooseneck and rear left and right brackets for warning signs, including socket - Sliding hook-in bar for ALU loading ramps at the rear of the vehicle - One bracket for a rotating beacon at the rear of the trailer - Galvanized folding supports under the rear bevel of the loading platform - One mudguard at the rear of the trailer - Operating manual and documentation on USB stick - Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump protection cover - Removable ALU side boards and tailgate on the gooseneck approx. 2,440 x 400 mm - The rear galvanized stanchions are removable (body length approx. 2,560 mm) - 3 pairs of WADER container pockets in the loading platform for 1x 20ft, 1x 30ft or 1x 40ft container - 6 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform - One INOX toolbox 1,500 x 390 x 810 mm under the loading platform, right side in direction of travel - Four warning signs, extendable by approx. 400 mm, approx. 423 x 423 mm with a position light - On the warning signs a bracket for a rotating beacon - Radio remote control for rear axle steering, in addition to cable remote control, with indicator lights on receiver for single-track monitoring - On the checker plate surfaces on the gooseneck and loading platform, a painted sand layer as anti-slip protection - Speed sticker 80 km/h at the rear and on both sides - Axle load gauge for determining axle loads, including load diagram

Stanje: rabljeno, največja dovoljena obremenitev: 28.000 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2009, naslednji pregled (TÜV): 07/2026, dolžina tovornega prostora: 12.800 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Skupna masa: 48.000kg/39.000kg Lastna masa: 11.000kg Nosilnost: 37.000kg/28.000kg Skupna dolžina: 13.500mm Nakladalna dolžina: 12.800mm Širina: 2.550mm Nakladalna višina: ca. 900mm Dodatne informacije: - tretja sledilno krmiljena os - razširitev za 3 m - dvodelni hidravlični klančini ca. 4000mm - shranjevalni prostori v labodjem vratu Kdsdpfxeywq Hcs Alnju - nakladalna dolžina na nizki postelji ca. 8.300mm - nakladalna višina v kolesnih poglobitvah ca. 600-700mm - 4x opozorilne table - dvomontaža 245/70R17,5 - SAF osi - poglobitev za roko bagra Vozilo je lahko polepljeno in/ali opremljeno z oglaševanjem.

Stanje: novo, lastna masa: 14.350 kg, največja dovoljena obremenitev: 53.450 kg, skupna masa: 67.800 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, dvižna zadnja plošča, Gooseneck: - Gooseneck in SNT design for optimization of loading bed length, length approx. 3,700 mm - Gooseneck rear with chamfer approx. 1,000 mm x 10° - For tractor units: 6x2, 6x4, 8x4 short Loading bed: - Extendable loading bed, length approx. 8,800 mm, rear chamfer approx. 500 mm x 10° - A recess in the loading bed and the chamfered section for receiving the excavator dipper stick, approx. 3,850 x 750 x 210/290 mm Two-part steel ramps: - One pair of two-part steel ramps, length approx. 4,350 mm, width approx. 900 mm - Ramps with rubber covering - Ramps hydraulically adjustable individually approx. 235 mm outwards and approx. 215 mm inwards - 'Super Grip' 25 mm rubber flooring and approx. 5 mm steel plate as additional reinforcement on the rear chamfer of the loading bed - Square climbing bars 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: - BPW axles and suspension, 1st axle steering, all other axles hydromechanically forced-steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Tires 235/75 R 17.5 - TPMS tire monitoring system according to ECE R141 - TPMS tire sensors fitted on all wheels, including spares Surface treatment: - Complete steel structure automatically blasted with shot blasting system after welding - Second blasting with corundum for optimum coating adhesion - HRM metallization of entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for best corrosion protection - Final painting with 2 layers of 2K top coat, single colour in MB 7350 Novagrau Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic power unit for controlling hydraulic functions, with the exception of hydraulic winches - 1 spare wheel - Outer carrier on the gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings in the rear area of the gooseneck - On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized - On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized - On top of the gooseneck, approx. 40 mm thick hardwood flooring, above kingpin area with checker plate cover - 2" kingpin - Round NATO socket on front connection strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross member - 8 pairs of recessed, fold-out lashing rings in the outer frame of the loading bed - Extendable (galvanized) widenings by approx. 230 mm per side Kodpfx Aljya E A Njnjdu - Wheel recesses with square climbing bars, 15 x 15 mm, in front of the axles fully open up to gooseneck cross beam, approx. 700 x 410 mm - Wheel recesses with square climbing bars, 15 x 15 mm, between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU covers for wheel recesses, which can also be used as bridging elements for the extension or as widening boards - 1 pair mechanical rear supports - Radio and cable remote control - Lift axle on front axle - Square climbing bars 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board system - 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Stanje: novo, največja dovoljena obremenitev: 36.410 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including vehicles available immediately or at short notice, can be found on our website. Excerpt from the equipment. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design to optimize load bed length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front bulkhead, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electric-hydraulic unit for hydraulic operations, excluding hydraulic winches * Approx. 40 mm thick hardwood cover above the gooseneck * 2-inch kingpin * Guide plate from the gooseneck for the fifth-wheel plate, approx. 500 mm wide * Receptacle at the rear of the gooseneck for aluminum drive-on ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the bulkhead * 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inner chassis rail) EQUIPMENT: * Load bed approx. 8,800 mm long, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * Recess in the load bed including the rear slope to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, with protected supply lines inside the extendable beams, automatically adapting to the respective load bed length * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steering-following * 3rd axle with electromagnetic reverse lock, activating via reverse gear or manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires. Make at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous and between-axle interrupted approx. 50 mm hardwood planking on load bed (increasing coefficient of friction) * 1 cross table, approx. 300 mm wide, for the extendable tube with large cross-section; cross table with offset load bed and extendable mounting rails for aluminum bridging elements * Load bed locking with conically welded locking profiles every approx. 250 mm, including pretensioning plate * 1 pair of lashing rings on front crossbeam (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck crossbeam, approx. 700 x 410 mm (W x D) * Wheel recesses with approx. 15 x 15 mm square climbing strips and widened sections at the lower area (if vehicle is fitted with extendable widenings) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load bed between 1st and 2nd axle * Wheel recesses with approx. 15 x 15 mm square climbing strips and widenings in lower area * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, can also be used as widening planks (if vehicle is fitted with extendable widenings) Kodpsy Auh Ijfx Alnedu * Aluminum elements lockable on the extension beams of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasted and painted in single color according to RAL code

Stanje: novo, lastna masa: 13.850 kg, največja dovoljena obremenitev: 31.150 kg, skupna masa: 45.000 kg, konfiguracija osi: 2 osi, dovoljena osna obremenitev (os 1): 12.000 kg, dovoljena osna obremenitev (os 2): 12.000 kg, dolžina tovornega prostora: 6.800 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 300 mm, velikost pnevmatike: 245/70 R 17,5, barva: črn, Oprema: ABS, Gooseneck: - Hydraulically detachable gooseneck with external main frame featuring integrated steering pick-up and individually operated push-off cylinders - Integrated hydraulic cylinders and support arms for coupling and uncoupling the lowbed deck - Piping connections to the lowbed, mounted on the inside of the main frame at the gooseneck kink - Bracket for locking pins Lowbed, extendable: - Frame pre-tensioning adapted for the maximum payload, reduced payload in the telescoped positions - Prepared for the installation of load area wideners - Telescoping stages approx. every 500 mm + container positions - 7 pairs of swivelling lashing rings, 13,400 daN lashing capacity - 5 pairs of stake pockets 100x50 mm in the outer frame - 3 pairs of M36 threaded bushings on the outside of the telescopic frame for screwing in lashing brackets - 1 pair of M36 threaded bushings on the inside of the telescopic frame for screwing in lashing brackets - Prepared for the installation of container locks - Adapter without pin-tab coupling: 2 pairs of 13,400 daN lashing rings welded on the adapter facing the lowbed; 1 pair on the outer adapter; 1 pair on the inner adapter - 45 mm spruce plank flooring between the flatbed frame sections Chassis, drive-over type: - Steel welded construction in compact design with open excavator trough at the rear - Kink to lowbed at 90°, with 2 pairs of holes at the front and rear of the chassis platform for hanging loading ramps using locking pins - Different track widths can be set using 2 different holes - Welded smooth steel floor above the axles with anti-slip coating, max. 5,000 kg axle load - End beam with cutouts for lights, designed as underrun protection according to ECE R58-003 - Valves and electrical distribution protected, installed in the double floor Axles, suspension, and tires: - DOLL tera pendle axle technology with hydraulically suspended GIGANT pendle axles - All axles rated at 12 t, with ABS and AGS (automatic slack adjuster) - All axles hydraulically steered, with max. 60° steering angle on the rearmost axle - Use of low-maintenance bearing points in the steering area - All lubrication points connected to the central lubrication system - Lift axle / jack function, a locking pin is supplied for each axle to allow axle lifting - DOLL tera pendle axle with hydraulic suspension and damping elements - Lifting and lowering device with 600 mm total stroke (-70/+530) - Hydraulic dual-circuit displacement steering system Kedpfx Asy Dqkholnedu - Steering pick-up at the king pin plate, mounted on a turntable - Transmission of steering angles via a tie rod to the front master cylinders - Rear slave cylinders transfer the front steering angles via solid steering rods to the steering axles - All valves are centrally mounted on a control block - Axle load indicator via manometer on the side - Steering pressure monitoring - Tire pressure monitoring system - Tires: 245/70 R 17.5 Accessories included: - Steel front wall with spare wheel holder, bolted, 520 mm high, hot-dip galvanized - Side and rear panels, insertable, approx. 400 mm high, anodized - Two central lubrication systems BEKAMAX - DOLL Tronic - CAN-Bus system - Support arms for coupling and uncoupling the lowbed deck - Fifth wheel plate with integrated steering pick-up, steering wedge, and 2'' king pin to accommodate the trailer - Gooseneck cylinders for coupling and uncoupling the lowbed deck - 6-way hydraulic coupling with pressure relief valve for easy disconnection of hydraul

Stanje: rabljeno, največja dovoljena obremenitev: 46.550 kg, skupna masa: 58.500 kg, konfiguracija osi: > 3 osi, prva registracija: 07/2006, dolžina tovornega prostora: 12.450 mm, širina tovornega prostora: 2.750 mm, skupna širina: 2.750 mm, skupna višina: 1.900 mm, Oprema: ABS, Langendorf SATUE 40/48 nizkopodni priklopnik za prekladalne bagre, nakladalnike itd. Prva registracija: SAF osi 1. in 2. os sta dvižni osi 3. in 4. os sta hidravlično/prisilno krmiljeni Kdsdpfx Aoxw Ay Sslneu Zračno vzmetenje Bobnaste zavore z ABS in EBS Pnevmatike: 235/70 R17,5 cca 40% Skupna masa: 58.500 kg, lastna masa: 11.950 kg, nosilnost: 46.550 kg Dolžina tovora: 1245 cm, širina: 275 cm Višina nakladanja v poglobitvah za kolesa: 67 cm Višina nakladalne površine zunaj poglobitev: 89 cm Pridržujemo si pravico do napak/pisnih napak in vmesne prodaje.

Stanje: rabljeno, prva registracija: 06/2010, dolžina tovornega prostora: 11.350 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 950 mm, - Krmiljena os - Daljinsko upravljanje - Hidravlične rampe - Zgornja nakladalna površina 3500 mm - Spodnja nakladalna površina 7850 mm Kdjdpfx Aox Dzn Ujlnsu

Stanje: rabljeno, največja dovoljena obremenitev: 26.380 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2020, naslednji pregled (TÜV): 10/2025, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, Wiese Mega polpriklopnik s drsnimi ponjavami in rampo Dhollandia 9t * Nakladalna ploščad Dhollandia z rampno funkcijo * Tip DHLSU.90, dvižna kapaciteta 9.000 kg, težišče tovora 1.000 mm, podpore * Daljinsko upravljanje * SAF osi z zračnim vzmetenjem in kolutnimi zavorami * Prva os je dvižna Kedpfxoyrkprs Alnjdu * Nerjavni zabojniki za orodje * Pnevmatike 435/50R19,5 Za dodatne informacije smo vam z veseljem na voljo.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 9.000 kg, največja dovoljena obremenitev: 21.000 kg, skupna masa: 30.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2009, dolžina tovornega prostora: 13.700 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 285.70 r 19.5, barva: rdeča, Leto izdelave: 2009, Oprema: ABS, SEM Eichkorn 2-axle disc trailer with tridec hydraulic steering, extendable from 13.80m to 21.35m, EXTE lateral stanchion seats for timber/log transport, supplied with exte posts, twistlock fittings for 40-foot container transport, year 2009, lateral RUD hooks, 4 removable and openable aluminium side panels with 70cm height, EBS, vehicle already registered in Italy. DEALER: INTERDRIVE SRL-PARMA Kdedsrum A Tjpfx Alnou

Stanje: novo, največja dovoljena obremenitev: 38.000 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.000 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.540 mm, skupna višina: 3.780 mm, Leto izdelave: 2026, Oprema: ABS, * Humbaur HTS 30 K * Heavy-duty semi-trailer * Low loader * NEW * Immediately available * Fully galvanized * Robust construction * Overall dimensions: 12,630 mm x 2,540 mm x 3,780 mm * Internal dimensions: 12,000 mm x 2,540 mm * Loading height: 890 mm * Fifth wheel height: 1,230 mm * Fifth wheel platform: 3,500 mm * Low bed: 8,680 mm * Gross weight: 48,000 kg * Payload: 38,000 kg * Tires: 235/75R17.5 * SAF low loader axles with lift and trailing steering axle * Air suspension with raising and lowering function * Twin tires * EBS braking system * 24-volt lighting system * LED side marker lights * Wabco Smart Board * 2-inch kingpin * Chassis frame hot-dip galvanized by immersion * Heavy-duty, welded chassis frame * Climbing strips on ramp incline * 50 mm softwood floor * Recess for excavator stick storage * 3 m equipment package * Steel toolbox under loading platform * Gooseneck with 400 mm front wall * 400 mm high aluminum side boards, foldable * Front storage box with lid * 3 pairs of lashing rings 6 t * 3 pairs of lashing rings 3 t * 5 pairs of lashing rings 10 t * 6 pairs of lashing rings 3 t * 6 pairs of lashing rings 2 t * Ramps with rubber covering * Spare wheel with holder on front wall * LED reversing lights * Visual paint finish on request * Additional equipment options available by arrangement ATTENTION!!!!! PLEASE READ CAREFULLY!!!!! We expressly reserve the right to prior sale, as this item is also offered on other platforms. We strongly recommend inspection and examination so that no misunderstandings arise regarding condition and suitability. Inspections and examinations are possible and expressly welcome by appointment at any time!!! The specified internal dimensions are approximate values. For new vehicles, additional costs for freight and documents may apply. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! PART EXCHANGE AND EXTRA PAYMENT POSSIBLE!!! Display area: 58285 Gevelsberg, Am Sinnerhoop 17 Kedpfx Ajr Ic Rwslnjdu Opening hours: Monday to Friday 8:00 am to 5:00 pm, Saturday 8:00 am to 2:00 pm Over 500 new and used trailers in stock at all times!!! Tel.: Fax:

Stanje: novo, največja dovoljena obremenitev: 31.500 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, Priekaba Wiese ar trijų ašių važiuokle, kėlimo stalu ir atverčiamu galu. Idealiai tinka šakinių krautuvų ir (arba) darbo platformų pervežimui. Techninės specifikacijos. 3 x 10 t ašys Pakeliama ašis Valdoma ašis su „Smart Steering“ (vairavimas į priekį ir atgal) Išorinio rėmo važiuoklė su nuolydžiu Galinė konstrukcija, tinkama 18 t, pritaikyta 2- ir 3-ašių vilkikams Hidraulinis kėlimo stalas reguliuojamas 3 pozicijose Atverčiamas galas su hidrauliniais išstumiamais elementais, tinkamas naudoti kaip užvažiavimo rampos, pervažiavimo rampos arba kaip pakrovimo platforma (Bendro ilgio sumažinimas pakėlus galą vertikaliai) Nuotolinis valdymas rampoms ir kėlimo stalui Priekinė sienelė Grotelinis grindų paviršius Daug tvirtinimo taškų „SmartBoard“ sistema Kdsdjvw Hmtjpfx Alneu Centrinė tepimo sistema Plieninė konstrukcija, cinkuota ir nudažyta Galima įsigyti daugybę papildomų pasirinkimų, pvz.: - Gervė - Įrankių dėžė ant priekabos pakopos - Aliuminiai ratlankiai Daugiau informacijos pagal užklausą.

Stanje: novo, skupna masa: 36.000 kg, dolžina tovornega prostora: 13.300 mm, širina tovornega prostora: 1.640 mm, višina nakladalnega prostora: 3.770 mm, Leto izdelave: 2026, Oprema: ABS, Posebno vozilo za prevoz viličarjev. Notranji nakladalnik / vmesni nakladalnik za največjo notranjo višino cca 3.770 mm Ponujena cena brez dodatne opreme. Na voljo oprema: Zadnji del z nakladalnim dvigalom / dvigalo, primerno za nakladanje in razkladanje na rampah. Ksdpfx Alevw Hm Tenjdu Vozilo je v proizvodnji in ima dobavni rok. Na zahtevo pripravimo ponudbo z želeno opremo. Več informacij na: ali nas pokličite.

Stanje: novo, Leto izdelave: 2025, GVN prikolica s 3 osmi nizkopodnožna Za več informacij nas kontaktirajte; Kjdpeq Di Uvofx Alnjdu

Stanje: novo, največja dovoljena obremenitev: 25.300 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of vehicles, including those available for immediate and short-term delivery, can be found on our website. Excerpt from the equipment specification. Full specification available upon request. Gooseneck * Gooseneck in SNT design to optimize loading area length * Length approx. 3,750 mm, hydraulically lift-/lowerable, as well as detachable * Technical fifth-wheel load: 25,000 kg For tractors: 4 x 2 and 6 x 2 Kessel bridge * Low bed designed as telescopic Kessel bridge SUPER LOW design * Length approx. 6,850 mm * with mechanical locking * Supply lines are routed protectively within the telescopic beams and automatically adjust to the respective low bed length Rear chassis * Short version with closed outer frame and tread plate cover * Chassis with excavator recess, closed in the rear half to accommodate air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twinned. Load index 143/141J (146/146F) Brake system * WABCO brand, EBS-E according to EU regulations, WITHOUT connection cable to tractor unit Paintwork * 6-coat final treatment * Complete steel construction shot-blasted after welding * 1 layer of zinc-based primer * 1 layer of adhesion primer. Final coating with 2 layers of 2K (acrylic) paint, single colour, then cavity sealing with special wax Trailer colour * RAL 3002 Carmine red * Rim colour: silver-grey * Side wall colour: Aluminium-natural Accessories included * Steel front wall, plug-in, approx. 400 mm high * 3 kW electro-hydraulic pump unit for hydraulic operation, except for hydraulic winches. Without installation of supply connectors at the tractor unit * Mounting adapter for 1 spare wheel in front of the gooseneck front wall * Outer beams of the gooseneck with mounting holes for screwable lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear chamfer of the gooseneck (LC 6,000 daN) * 2 inch kingpin * Hydraulic traverse for supporting the gooseneck on the tractor or a dolly * Air connection with air pistol on the gooseneck * 1 pair of steel ramps with climbing cleats and retaining bolts to bridge the low bed attachment hooks * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) Kedjv Sw E Aopfx Alnedu * At the outer beams of the loading area, prepared for removable loading floor * Lashing rings with retaining spring approx. every 1,200 - 1,300 mm on the inside outer beams of the loading area * Lashing rings with retaining spring approx. every 1,200 - 1,300 mm on the outermost beams of the loading area (LC 10,000 daN) * Cut-outs over the lashing rings on the upper flange of the outer beams * Mechanical pin-lug coupling from the low bed to the running gear, for changing the loading area or installing extension beams. With electro-pneumatic-hydraulic couplings * Outer beams of the low bed with painted-on sand layer for anti-slip protection * 2nd driving height for upper drive position, max. ± 50 mm from the normal driving position, without installation of controls from the tractor unit * 1 pair of lashing rings with retaining spring at the transition from low bed to excavator recess (LC 10,000 daN) * Front and rear chamfered edge

Stanje: rabljeno, skupna masa: 42.000 kg, prva registracija: 06/2013, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Proizvajalec: Faymonville Tip: Euromax Leto izdelave: 2013 Vrsta izdelka: Rabljeno Podatki: Prva registracija: 13.06.2013 Skupne mere D x Š x V: 13,50 x 2,55 x 4 m Dovoljena skupna masa: 42.000 kg Lastna masa: 10.900 kg Lokacija: 45143 Essen takoj na voljo Kedpfx Aloyr Uyzjnsdu

Stanje: rabljeno, največja dovoljena obremenitev: 27.300 kg, skupna masa: 40.000 kg, prva registracija: 02/2012, skupna širina: 2.550 mm, skupna višina: 3.700 mm, Proizvajalec: Faymonville Tip: Euromax GTZ-3AUB Leto izdelave: 2012 Vrsta izdelka: Rabljeno Podatki: Prva registracija: 02/2012 Skupne mere D x Š x V: 13,35 x 2,55 x 3,70 m Lastna teža: 12.700 kg Dovoljena skupna masa: 40.000 kg Nosilnost: 27.300 kg Število osi: 3 Posebnosti: Raztegljiv za 3 m (16,35 m), prisilno krmiljena dohodna os, hidravlična dvižna postelja za labodji vrat Lokacija: Essen Kjdpfjy H T Dpex Alnjdu Takoj na voljo

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle trailing steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift-and-lower function and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as an infotool with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Landing gears at the front as well as mechanical swing-down supports at the rear of the chassis * Straight sheet steel mudguards * Spare wheel holder under the chassis on the right side ----Low Loader Deck: * Gooseneck platform with 45° chamfered front corners and front toolbox made of galvanized sheet steel W = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm aluminium side boards (RAL 9010 pure white) on the gooseneck, foldable and removable * Rear wall – 150 mm – fitted * Rear slope at the gooseneck platform to the low-bed approx. 700 mm long * Gooseneck platform with 50 mm timber planks, low-bed platform with 60 mm timber planks * Tread plate over the axles ----Extensions: * 8 x mechanical fold-out extensions to 3 m total width, but not on the rear slope (extension planks present with storage on gooseneck platform) * Mechanically adjustable warning sign packages front and rear ----Load Securing (Lashing Package): * On the gooseneck platform: 2 x 6.3 t lashing rings each side and 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform sides: 2 x 13.4 t lashing rings each, and 4 x 10 t swivel and lowerable lashing rings recessed in the outer frame Ksdpfx Aloy Ngz Hjnedu * 2 x 6.4 t lashing eyes per side and rear 1 lashing ring in the excavator arm recess * 2 x container locks directly after the gooseneck in the low-bed platform ----Excavator Arm Recess: * Excavator arm recess from end of last rigid axle, over steering axle to end crossmember, continuous, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Loading Ramps: * Mechanically one-piece hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer retrofit of hydraulic ramp shifting * The outer board of the ramp consists of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the drive-up slope * Rubber on the ramp and drive-up slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck from 40 up to 120 l/min) ----Loading Dimensions: * Loading area, gooseneck platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm drive-up slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, extension brackets hot-dip galvanized * Axles, landing gears, air reservoirs painted in a black tone * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may include features not part of the offered vehicle * Sample images ----Delivery time: * tba

Stanje: rabljeno, največja dovoljena obremenitev: 29.380 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2024, naslednji pregled (TÜV): 03/2027, skupna dolžina: 13.680 mm, skupna širina: 2.550 mm, skupna višina: 3.570 mm, Oprema: ABS, Kässbohrer prikolica z nizko nosilnostjo in hidravličnim podaljškom TEHNIČNI PODATKI: * Višina sedla: 1.250 mm * Širina zadnjih vrat: 2.300 mm * Zunanja dolžina: 13.190 mm * Dolžina podaljška: 3.950 mm * Dolžina platforme: 9.240 mm * Podaljšek platforme: 4.500 mm * Pozicija zaklepanja: 500 mm * Višina platforme: 875 mm * Medosna razdalja: 8.100 mm Kjdozrq Dbspfx Alnjdu * Razdalja med osmi: 1.360 mm * 3 x osi BPW z bobnastimi zavorami * Nosilnost osi: 30.000 kg * Nosilnost posamezne osi: 10.000 kg * Nosilnost pete: 18.000 kg * Prazna teža: pribl. 12.627 kg (±3 %) * Skupna širina: 2.550 mm + 600 mm stranske podaljške * Drsna platforma ni vključena * Dovoljena skupna masa: 52.800 kg (60 km/h) * Dovoljena skupna masa: 48.000 kg (80 km/h) PODVOZJE: * 2 fiksni osi spredaj * 1 spremljajoča os zadaj * Zavorna sistem WABCO * Pnevmatike: 245/70 R17.5 * Nosilec rezervne pnevmatike na sprednji steni * Zračna vzmet * Merilnik obremenitve za prikaz obremenitve osi * Vtičnica NATO OKVIR: * Jeklo S700 MC * Podaljšek z 90° vertikalnimi robovi * Sprednje podpiralne noge JOST * Zložljive podpiralne noge zadaj RAMPE: * Hidravlični podaljšek * 2 hidravlični nakladalni rampi * Pocinkana jeklena površina * Dolžina rampe: 4.200 mm * Širina rampe: 850 mm * Kot rampe: 9° * Nosilnost: 40.000 kg * Višina v zaprtem položaju: 3.510 mm VARNOST TOVORA: * 14 x 2 pritrdilne točke, 5 t * 7 x 2 pritrdilne točke, 10 t * 6 x 2 pritrdilne točke, 8 t * 8 x 2 žepi za pritrditev tovornega pasu (52 × 102 mm) * Zaklep za kontejnerje za 20- in 30-čevljske kontejnerje * Stranske stene na podaljšku DODATNA OPREMA: * Rotacijska luč * Delovna luč * 2 seta plošč za označevanje presežne širine z LED-osvetlitvijo * Vtičnica za rotacijsko luč * Predal za shranjevanje pod platformo BARVA: * Okvir v barvi RAL 3020, prometna rdeča Za dodatne informacije smo vam z veseljem na voljo.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WGOSTZH5740027600, lastna masa: 15.000 kg, največja dovoljena obremenitev: 64.000 kg, skupna masa: 80.000 kg, dovoljena osna obremenitev (os 1): 12.000 kg, dovoljena osna obremenitev (os 2): 12.000 kg, dovoljena osna obremenitev (os 3): 12.000 kg, dolžina tovornega prostora: 18.000 mm, širina tovornega prostora: 3.000 mm, prostornina tovornega prostora: 15 m³, skupna dolžina: 16.715 mm, skupna širina: 2.550 mm, skupna višina: 900 mm, vzmetenje: hidravlika, velikost pnevmatike: 235, stanje pnevmatik: 90 odstotek, medosna razdalja: 1.320 mm, največja hitrost: 80 km/h, barva: modra, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2024, Oprema: ABS, dvižna zadnja plošča, nalagalnik, oporno kolo, osrednja vrtljiva plošča, močna prikolica s petimi osmi in nizko nosilno konstrukcijo (prikolica z nizko platformo); razširljiva prikolica z dvojnimi hidravličnimi rampami. Kjdpfx Alszuc Udjnodu

Stanje: novo, največja dovoljena obremenitev: 27.000 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, žerjav, Stopničasti polpriklopnik v izvedbi s kiper sistemom za zabojnike na kolesih 3 osi z disk zavorami SAF osi Dvigljiva os Pnevmatike 385/55 R 22.5 Samonastavljive podporne noge LED osvetlitev Delovni žarometi 25 t sistem v potisni/zgibni izvedbi za dolžino zabojnika do 7.500 mm Višina valjev cca 1.300 mm Hidravlična notranja zapora Softstop Hitri hod del polpriklopnika kot nakladalna površina z bočnimi stenami Kedpfx Ajzirgxelnsdu 1 x na zalogi dobavljivo. Druge opreme ali izvedbe na voljo po dogovoru. Dodatne informacije na zahtevo.