Kögel 3 Achs Plateau Liftachse Pal.-Kasten Bpw-Achsen nakup rabljenega (40.212)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Mali oglas
Egestorf
860 km
Tristrani nagibni priklopnik
MEILLERMZDA 18.23, Pal.- Breite, Liftachse
Pokliči
Stanje: novo, največja dovoljena obremenitev: 13.340 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.900 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 900 mm, Leto izdelave: 2025, Oprema: ABS, Brake system:
* Wabco EBS-E / ABS (electronic braking system with RSS)
* Emergency release device for spring brake cylinders
* Drum brakes 420 x 180 mm with asbestos-free brake linings and closed brake drums
----Axle:
* 1st axle liftable
* 2 x 9 t BPW axles
----Suspension:
* Air suspension with automatic rapid lowering during tipping operation to increase stability (deactivatable for paver operation)
----Electrical / Lighting:
* Tire pressure monitoring system (TPMS)
* 15-pin electrical connector
* 5-chamber tail lights with protective cover
----Drawbar / Towing Eye:
* Offset central tube drawbar with height-adjustable 50 mm flange towing eye (tipping over the drawbar is possible, but with limited tipping angle and depending on the truck)
----General Attachments:
* Aluminum air tanks
* Welded tie rod
* Jost landing gear front
* Rear underrun protection
* Closed individual plastic mudguards
* Access ladder front left outside on the front wall
----Tipper Body:
* Steel, three-way tipper with M-Jet sideboards
* Side boards with sturdy, continuous inward sloping top rail
* Continuous side walls – without central stanchion
* Right side wall swinging via manual central locking – prepared for long lever and hinges for folding side wall
* Left side wall swinging via manual central locking, foldable with drop side spring assist
* Tailgate swinging with automatic cam lock and 150 mm rear chute
* Manual dosage device via chain
----Thickness of floor, side walls, front and rear wall:
* 5 mm floor made of STEELECT steel (HBW 450 steel)
* Side walls and tailgate made of 4 mm STEELECT steel (HBW 450 steel)
* Front wall made of 3 mm STEELECT 240 steel
----Load securing:
Itsdpsxlmi Tsfx Ahkef
* 5 tie-down loops per side at the top rail, and 5 tie-down rings per side in the floor
----Painting:
* Chassis painted in RAL 7021 black grey
* Painting of sidewalls in RAL 9006 white aluminium
----General Information:
* Bodywork compliant with EN 12642 XL
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time
* Available immediately ex Egestorf
Mali oglas
Bruck-Waasen
259 km
Polpriklopnik kiper
SCHWARZMÜLLER3-Achs Kipper 60m³ Liftachse Alufelgen
Pokliči
Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 11/2020, prostornina tovornega prostora: 60 m³, Oprema: ABS, Schwarzmüller 3-Axle Tipper Trailer 60m³ Lift Axle Alloy Wheels Universal Tailgate Platform Roll Tarpaulin
At a glance
· First registration: 13.11.2020
· Colour: white
· Tarpaulin colour: blue
· Unladen weight: 6,490 kg
Itodpfxox Uvqbs Ahkef
· Tyres: 385/65 R 22.5
· Note: Immediately available
Special Features
60m³, triaxle tipping semi-trailer, hydraulic tank + controls at the platform, alloy wheels, universal tailgate with door and pendulum function with pendulum frame and bows, SAF axles, mechanical 4-hook locking, lift axle, platform with access ladder (work platform with access), roll tarpaulin with crossbows, automatic lowering during tipping, drum brakes, JOST landing gear, 1x15-pin + 2x7-pin E-connection, contour marking, foldable underrun protection, spare wheel holder, Austrian A-plate, lashing eyes, toolbox, aluminium ladder, loading pressure gauge, 2 LED reversing lights.
Standard Equipment
2 wheel chocks with bracket, ABS, EBS, air suspension.
Errors, spelling mistakes and interim sale excepted.
The seller reserves the right to withdraw from the sale.
_____
Internal reference number for inquiries: TR23
_____
STARENT Truck & Trailer GmbH
Bruck 49, A - 4722 Peuerbach
Sales contacts:
Mr. Ing. Wimmer Christoph (German, English, Czech, Polish, Italian)
p: also WhatsApp
t:
@:
Mr. Mehmet Terzi (German, Turkish, English, Russian, Ukrainian, Bosnian, Serbian)
p: / also WhatsApp
t: -104
@:
Mr. Elias Höfler (German, English, Bulgarian, Bosnian, Serbian)
p: / also WhatsApp
t: -123
@:
We speak 13 languages. Surely yours as well. Contact us!
Homepage:
Facebook:
Instagram:
Starent Truck & Trailer GmbH buys your commercial vehicles such as tractor units, trailers, trucks and vans.
Michael Doblhofer (German, English)
p: also WhatsApp
t: -102
@:
Michael Leirich (German, English)
p: WhatsApp
t: -125
@:
Mali oglas
Gralla
84 km
Odprta prikolica
FlieglFLIEGL 3-Achs Plateau Sattel Typ SDS 390
Pokliči
Stanje: novo, konfiguracija osi: 3 osi, barva: sivo-črna, vrsta prenosa: mehanski, Colour: Natural, lift axle, electronic braking system (EBS), 1x 15-pin connection plug. Equipment: Slightly beveled new-design outer frame with “Load-Lock Profile” for lashing straps, 13 additional pairs of lashing rings in the outer frame, each rated 5 t for a total of 24 t. Two-speed landing gear, single-sided operation, with semi-circular lower section and straight forklift underrun protection made of steel on the outer frame (sides and rear). One spare wheel carrier for one single wheel, with wheel fastening kit. 1 plastic toolbox (650 mm x 520 mm x 670 mm). 7 pairs of drop-in stake pockets (83 x 83 mm) integrated into the outer frame. SAF disc brake axles with 430 mm air suspension. First axle is an automatic lift axle, including forced lowering and starting aid, activated with third brake circuit. Wheels and tires: 6 x 385/65 R22.5, brand manufacturer; 6 steel rims, factory silver. Flooring: approx. 30 mm phenolic plywood, cross joints with Omega insert for high point loading, forklift axle load up to max. 7,100 kg. Front wall / corner posts: 25 mm aluminium hollow profile, 1,950 mm high; steel corner posts in high-volume version plus 2 center supports as “Crash Blocker” (mounted inside lower area at approx. 140 mm). Sideboards: 25 mm aluminium hollow profile, 700 mm high. Paintwork: chassis hot-dip galvanized including passivation ("15-year anti-corrosion warranty"). Aluminium sideboards anodized. Subject to errors and changes.
Ijdpfxstcwmio Ahkotf

Izvedite več zdaj
+49 201 858 95 507
+49 201 858 95 507
Objavite oglas zdaj
*na oglas/mesec
Mali oglas
Empfingen
535 km
Gospodarsko vozilo
Rohr3 Achs Schwanenhals zwillingsbereift Liftachse
Pokliči
Stanje: rabljeno, prva registracija: 11/2004, skupna masa: 35.000 kg, lastna masa: 5.900 kg, barva: črn, vrsta prenosa: drugo, emisijski razred: noben, največja dovoljena obremenitev: 29.100 kg, vzmetenje: zrak, velikost pnevmatike: 245/70 R17.5, velikost sprednje pnevmatike: 245/70 R17.5, velikost zadnje pnevmatike: 245/70 R17.5, voznikova kabina: drugo, Oprema: ABS, dodatne luči, elektronski program stabilnosti (ESP), meglenke, osvetlitev, registracija tovornjaka, zavorni sistem na stisnjen zrak, šasija, Rohr 3-osni labud vrat/savijena platforma poluprikolica RSP/38 GE
* Labud vrat / savijena konstrukcija
* 3. osovina podizna
* dvostruka montaža točkova
* Dimenzije pneumatika: 245/70 R17.5
* Vazdušno ogibljenje (podizanje/spuštanje)
* 4 prstena za vezivanje sa svake strane na savijenom delu
* 7 prstena za vezivanje sa svake strane pozadi na tovarnoj površini
* 2x po 6 džepova za stubove u sredini prikolice
* Lep drveni pod
* Visina utovarne ivice pozadi: 0,89 m
* Visina utovarne ivice na mestu savijanja: 1,40 m
* Razlika u visini tovarnih površina: 0,53 m
* Unutrašnje dimenzije: ukupna dužina 12,50 m, dužina savijenog dela 4,00 m, dužina zadnje površine 8,50 m, širina 2,48 m
Itjdsy A Et Uepfx Ahkjf
* Težine: dozvoljena ukupna masa 35.000 kg, masa vozila 5.900 kg, nosivost 29.100 kg
* nemačko vozilo i nemačka dokumentacija!!
* vrlo dobro stanje!!
* prvi vlasnik!!
* Prva registracija: 15.11.2004
* Tehnički pregled i periodična kontrola istekli
* Broj šasije: W0953900041R12764
Zadržavamo pravo na prethodnu prodaju, greške i izmene!
Na pojedinim slikama su logotipi firme uklonjeni - molimo pitajte!
Funkcionalnost dodatne opreme bez garancije!
Vaš kontakt:
Christoph Ott
Tel. + WhatsApp:
Mali oglas
Empfingen
535 km
Gospodarsko vozilo
Schmitz Cargobull3 Achs MEGA Liftachse Hubdach SAF-axles TÜV9 26
Pokliči
Stanje: rabljeno, prva registracija: 01/2007, skupna masa: 39.000 kg, lastna masa: 7.450 kg, barva: srebrn, vrsta prenosa: drugo, emisijski razred: noben, Leto izdelave: 2006, največja dovoljena obremenitev: 31.550 kg, naslednji pregled (TÜV): 09/2026, vzmetenje: zrak, prostornina tovornega prostora: 101 m³, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, velikost pnevmatike: 455/40 R22.5, velikost sprednje pnevmatike: 455/40 R22.5, velikost zadnje pnevmatike: 455/40 R22.5, voznikova kabina: drugo, Oprema: ABS, dodatne luči, elektronski program stabilnosti (ESP), meglenke, osvetlitev, registracija tovornjaka, zavorni sistem na stisnjen zrak, šasija, Schmitz 3-axle MEGA Curtainsider SPR/SCS 24/L - 13.62 M B MEGA
* Lift axle
* SAF axles
* Galvanized chassis
* Pallet protection strips
* Edscha sliding roof
* Sliding tarpaulins left/right
* Hydraulic lifting roof
* 2 toolboxes on the left
* Recessed lashing rings in the load floor
* Disc brakes
* ABS, EBS, ALB, LSV, CDF
* External frame with holes
* Currently equipped with aluminium slats
* Rear portal doors
* Air suspension (raise/lower)
* Certificate according to EN 12642-XL + Daimler 9.5
* Tyres: 455/40 R22.5
* Interior dimensions: L - 13.62 m, W - 2.48 m, H - 3.00 m
* Weights: GVW - 39,000 kg, Unladen weight - 7,450 kg, Payload - 31,550 kg
* German vehicle with German documents!!
Itodpfxoyct Sdj Ahkjf
* Very good condition - silver neutral tarpaulin!!
* 3rd owner
* First registration: 16.01.2007
* MOT valid until 09/2026
* Safety inspection valid until 02/2026
* VIN: WSM000003046439
Subject to prior sale, errors and modifications excepted! Company logos have been removed from some images – please inquire!
No guarantee for the function of the extras!
Your contact:
Christoph Ott
Tel. + WhatsApp:
Mali oglas
mengen /B 311 am bodensee
479 km
Polpriklopnik s premičnim dnom
SCHWARZMÜLLERMEGA 96 m3/3-achs /BPW /ALU / LIFT / 08 mm boden
Pokliči
Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2018, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.880 mm, Leto izdelave: 2018, Oprema: ABS, lfd 12353
WALKINGFLOOR MEGA SCHWARZMÜLLER 96m³ 3-osovinski
96 m³ / BPW / ALUMINIJUM / LIFT / 08 mm pod
proizvođač: SCHWARZMÜLLER
prva registracija: 06.2018
dimenzije: 13500 x 2470 x 2880 mm
zapremina: 96 m³
maksimalna dozvoljena težina: 36.000 kg
sopstvena težina: 8.700 kg
teretna osovina: 12.000 kg
vazdušno ogibljenje s podizanjem/spuštanjem
do bubanj kočnice
ABS
EBS
ECAS
proizvođač osovine: BPW
podižuća osovina
prstenovi za vezivanje
alatnica
boja nadgradnje: 5010 plava
boja šasije: 9011 siva
Itodpfx Aoyxazljhkjf
broj pneumatika: 6
stanje pneumatika: 5/5/8/9/10/4 mm
pneumatici zadnje osovine: 445/45 R19,5; pod 8 mm
BPW bubnjevi / alu felne / podižuća osovina
visina priključka treba da bude 980 mm
aluminijumski ram
aluminijumski vazdušni rezervoar
13 pari zateznih prstena po 2 t
ALCO DURA BRIGHT EVO aluminijumske felne
podižuća osovina / daljinsko upravljanje / aluminijumski rezervoar itd?
sve informacije su bez garancije, uz mogućnost prethodne prodaje!
ukoliko imate pitanja o ovom ili drugim vozilima, pozovite nas.
if you have any questions for this or another trailer / car please call us.
Mali oglas
Bremen
891 km
Polpriklopnik s ploščadjo
HeavyTrailer3-Achs-Mega-Plateau "Switch"
Pokliči
Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 6.640 kg, skupna masa: 40.000 kg, prva registracija: 02/2023, dolžina tovornega prostora: 13.510 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 445/45 R 19,5, barva: siv, Leto izdelave: 2023, 3-axle Mega Flatbed Semi-Trailer HeavyTrailer
Gross weight: approx. 40,000 kg
Fifth-wheel load: approx. 16,000 kg
Axle load: approx. 24,000 kg
Unladen weight: 6,640 kg
Payload: 33,360 kg
Length: 13,510 mm
Vehicle width: 2,540 mm
Coupling height: approx. 980 mm / 1,100 mm
Loading height (unladen): 1,080 mm / 1,200 mm
Chassis
- Chassis frame construction made of welded longitudinal beams and continuous cross members
- Wide underrun neck approx. 700 mm
- 6 pairs of lashing rings (2,000 kg lashing capacity), welded into outer frame
- 6 pairs of stake pockets (80 x 50 mm) in outer frame
- 6 pairs of stake pockets (80 x 50 mm) inside on the longitudinal beam
- 2 pairs of ferry lashings, painted yellow
- 6 pairs of lashing rings (5,000 kg lashing capacity), welded into outer frame
- Front wall approx. 2,000 mm high, with sheet metal cladding, bolted design
- Large, edged premium rear lamp panel
- Rear underrun protection, welded version (rectangular tube)
- Side underrun protection, both sides
Support Legs
- 24 t telescopic landing gear, single-sided operation, half-moon with base plate
Axles/Suspension
- 3 axles à 8 t (technically 9 t), disc brakes
- Second ride height: Button for 2nd ride height at bracket for raising and lowering (+ approx. 120 mm)
Itjdpfx Ahov Darpekjf
- Air suspension, total stroke approx. 300 mm
- Lifting and lowering device with 1 rotary slide valve
- Holder for lifting/lowering device, bolted version
- 6 tyres 445/45 R 19.5
- Wheel mounting via center centering
Brakes
- Dual-circuit compressed air brake system according to EC Directive 71/320
- With double eyelet valve for brake and spring brake
- Test nipple for brake cylinder pressure at front right brake cylinder
- Each coupling button red and yellow
- Lifting/lowering device mounted at rear left in direction of travel
- 2 x approx. 80 l air tanks in steel, painted black (1x brake, 1x lifting/lowering)
Lighting System
- Lighting system 24 Volt with large multifunction lights
- Side marker lights (LED) with reflector
- Front position lights, lower, white, one each on left and right
- 15-pin plug and socket at front
- EBS socket
- License plate lighting
Floor
- 28 mm hardwood floor with galvanized omega steel profiles
- Hardwood floor screwed onto the cross members
- Omega profiles bolted to head frame
Painting
- KTL with zinc phosphating plus powder coating
- Chassis + front wall: MB 7350 novagrau
Accessories
- Contour marking for flatbed vehicles
- Front wall up to 2,000 mm high, with sheet metal cladding, plug-in type
- Bracket for rotating beacon at rear
- SmartBoard
- ECE marking plate at rear
- 4x warning signs, extendable
- Access ladder rear right, foldable and extendable at rear
- 2x wheel chocks with holder
- 2 rubber bumpers at rear corners
- Mud flaps at rear
- Plastic fenders with anti-spray mud flaps
- 4 pairs of container locks with retractable twistlocks, recessed into the floor, including additional cross members
- Suitable for accommodating 1x40' and 2x20' containers
- Open mesh box longitudinally in direction of travel (600 x 450 x 2,670 mm), galvanized, bolted
Mali oglas
Bovenden
710 km
Prikolica z nizko platformo
Scorpion 3-Achs Tiefladeanhänger, Liftachse,
Pokliči
Stanje: novo, lastna masa: 7.500 kg, največja dovoljena obremenitev: 25.500 kg, skupna masa: 33.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.650 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 940 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, barva: modra, Leto izdelave: 2021, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, 3 osi, obračalna vlečna gred, zračno vzmetenje, dviganje in spuščanje, 2. os dvižna, ABS (protiblokirni sistem), sidrne ušesca, mehanske rampe, zadnje podpiranje, stranska aluminijasta zaščita, dvojna pnevmatika.
Nadgradnja: 3-osna nizkopodna prikolica s pnevmatskimi naletnimi rampami, bobnaste zavore, 2. os dvižna!
Itsdjxc Nz Hepfx Ahkof
Dolžina ramp približno 2800 mm!
Novo vozilo iz zaloge! Ni homologirano za EU! Podatki o dodatni opremi brez garancije, spremembe, vmesna prodaja in napake pridržane!
Mali oglas
Empfingen
535 km
Gospodarsko vozilo
Krone3 Achs MEGA Staplerhalterung Liftachse SAF
Pokliči
Stanje: rabljeno, prva registracija: 06/2016, skupna masa: 39.000 kg, lastna masa: 6.830 kg, barva: rumena, vrsta prenosa: drugo, emisijski razred: noben, Leto izdelave: 2016, največja dovoljena obremenitev: 32.170 kg, naslednji pregled (TÜV): 08/2025, vzmetenje: zrak, prostornina tovornega prostora: 101 m³, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, velikost pnevmatike: 435/50 R19.5, velikost sprednje pnevmatike: 435/50 R19.5, velikost zadnje pnevmatike: 435/50 R19.5, voznikova kabina: drugo, Oprema: ABS, dodatne luči, elektronski program stabilnosti (ESP), meglenke, osvetlitev, registracija tovornjaka, zavorni sistem na stisnjen zrak, zaščita za glavo, šasija, Krone 3-Axle MEGA Curtainsider with rear-mounted forklift bracket
* Sliding curtains on left and right
* Edscha sliding roof
* Lift axle - 1st axle
* SAF axles
* SAF Tire Pilot system: tire inflation and monitoring system
* Disc brakes, 370 mm diameter
* Lifting roof
* Steel pallet stop strips
* 30 mm strong plank floor
* Tyres: 435/50 R19.5
* Forklift bracket – mounting for transporting truck-mounted forklifts at the rear of the MEGA trailer
* Wooden slats
* 2 toolboxes
* Air suspension (raise/lower)
* ABS, EBS, ALB, LSV, CDF
* Rear portal doors
* 3 pairs of sliding rings
* Vario-Fix steel perforated outer frame
* Complies with EN 12642 XL body strength (VDI 2700)
* Front wall at upper body height with aluminium volume corner posts
* Loading height unladen in driving position (level): approx. 1.02 m
* Loading height laden in driving position (level): approx. 0.99 m
* Internal dimensions: L - 13.62 m, W - 2.48 m, H - 3.00 m
* Weights: GVW - 39,000 kg, Tare - 6,830 kg, Payload - 32,170 kg
* German vehicle with German registration documents!
* 1 previous owner
Itedpfoypcrtjx Ahkjf
* First registration: 17.06.2016
* MOT valid until 08/2025
* Safety test (SP) valid until 02/2026
* VIN: WKESD00000716203
Mali oglas
Empfingen
535 km
Gospodarsko vozilo
Krone3 Achs MEGA Staplerhalter Liftachse SAF TÜV05 26
Pokliči
Stanje: rabljeno, prva registracija: 06/2016, skupna masa: 39.000 kg, lastna masa: 6.830 kg, barva: rumena, vrsta prenosa: drugo, emisijski razred: noben, Leto izdelave: 2016, največja dovoljena obremenitev: 32.170 kg, naslednji pregled (TÜV): 05/2026, vzmetenje: zrak, prostornina tovornega prostora: 101 m³, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, velikost pnevmatike: 435/50 R19.5, velikost sprednje pnevmatike: 435/50 R19.5, velikost zadnje pnevmatike: 435/50 R19.5, voznikova kabina: drugo, Oprema: ABS, dodatne luči, elektronski program stabilnosti (ESP), meglenke, osvetlitev, registracija tovornjaka, vilice za palete, zavorni sistem na stisnjen zrak, šasija, Krone 3-axle MEGA curtainsider with rear-mounted forklift bracket
* Sliding curtains on both left and right sides
* Edscha sliding roof system
* Lift axle – 1st axle
* SAF axles
* SAF Tire Pilot system: tyre inflation and monitoring system
* Disc brakes, diameter 370 mm
* Lifting roof
* Steel pallet stop strips
* 30 mm thick plywood flooring
* Tyres: 435/50 R19.5
* Forklift bracket – mounting for transporting piggyback forklifts at the MEGA trailer rear
* Wooden slats
* 2 toolboxes
* Air suspension (raise/lower)
* ABS, EBS, ALB, LSV, CDF
* Rear portal doors
* 3 pairs of sliding rings
* Vario-Fix steel perforated external frame
* Body strength compliant with EN 12642 XL (VDI 2700)
* Front wall at body height with aluminium volume corner posts
Itjdpoyct D Tefx Ahkjf
* Loading height unladen (level drive position): approx. 1.02 m
* Loading height laden (level drive position): approx. 0.99 m
* Internal dimensions: L - 13.62 m, W - 2.48 m, H - 3.00 m
* Weights: GVW - 39,000 kg, Tare - 6,830 kg, Payload - 32,170 kg
* German vehicle with German documents!
* 1 previous owner!
* First registered: 17.06.2016
* TÜV valid until 05/2026
* Safety inspection valid until 11/2025
* VIN: WKESD00000716202
Subject to prior sale, errors, and changes!
Company logos may have been removed from some of the pictures – please enquire!
Functionality of the extras not guaranteed!
Your contact:
Christoph Ott
Tel. + WhatsApp:
Mali oglas
Empfingen
535 km
Gospodarsko vozilo
Schmitz Cargobull3 Achs MEGA Liftachse Hubdach SAFaxle TÜV 01 26
Pokliči
Stanje: rabljeno, prva registracija: 01/2007, skupna masa: 39.000 kg, lastna masa: 7.450 kg, barva: srebrn, vrsta prenosa: drugo, emisijski razred: noben, Leto izdelave: 2006, največja dovoljena obremenitev: 31.550 kg, naslednji pregled (TÜV): 01/2026, vzmetenje: zrak, prostornina tovornega prostora: 101 m³, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, velikost pnevmatike: 455/40 R22.5, velikost sprednje pnevmatike: 455/40 R22.5, velikost zadnje pnevmatike: 455/40 R22.5, voznikova kabina: drugo, Oprema: ABS, dodatne luči, elektronski program stabilnosti (ESP), meglenke, osvetlitev, registracija tovornjaka, zavorni sistem na stisnjen zrak, šasija, Schmitz 3-osovinski MEGA cerada SCS 24/L - 13.62 M B MEGA
* Podizna osovina
* SAF osovine
* Pocinkovano šasija
Itsdpfx Aheyct Rgokef
* Graničnici za palete
* Edscha klizni krov
* Klizne cerade levo/desno
* Hidraulični podizni krov
* 2 kutije za alat levo
* Uvučene vezne ušice u podu sanduka
* Disk kočnice
* ABS, EBS, ALB, LSV, CDF
* Okvir sa rupama
* Trenutno ALU letve
* Portalna vrata pozadi
* Vazdušno vešanje (podizanje/spuštanje)
* Sertifikat prema EN 12642-XL + Daimler 9.5
* Gume: 455/40 R22.5
* Unutrašnje dimenzije: D-13,62 m, Š-2,48 m, V-3,00 m
* Težine: Dozv. ukupna masa-39.000 kg, sopstvena masa-7.450 kg, nosivost-31.550 kg
* Nemačko vozilo sa nemačkom dokumentacijom!!
* Lepo stanje - neutralna srebrna cerada!!
* 3. vlasnik
* Prva registracija: 17.01.2007
* Tehnički pregled do 01/2026
* Bezbednosni pregled do 07/2025
* Šasija broj: WSM000003046452
Prodaja uz mogućnost međuprodaje, greške i izmene su rezervisane! Delimično su na slikama uklonjeni firmirani logotipi - molimo pitajte! Funkcionalnost dodatne opreme bez garancije!
Vaš kontakt:
Christoph Ott
Tel. + WhatsApp:
Mali oglas
Liezen
166 km
Polpriklopnik kiper
SCHWARZMÜLLER3 Achs 28m³ Stahlmulde Liftachse
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 26.500 kg, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2010, Leto izdelave: 2010, Oprema: ABS, Polpriklopnik Schwarzmüller, 3 osi, 28m³, jekleni prekucnik
Iedpfx Aex S Tzrshkstf
Stanje: vizualno kot na fotografijah, tehnično v dobrem stanju
Pnevmatike: 10-40 %, priložene pa so 4 rezervne pnevmatike z platišči
Mali oglas
Liezen
166 km
Polpriklopnik s premičnim dnom
SCHWARZMÜLLER3 Achs Schubboden Liftachse
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 26.050 kg, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2018, Leto izdelave: 2018, Oprema: ABS, Schwarzmüller S1/J02VLN3/D20K0 3-osna polprikolica s pomično dno in dvižno osjo
Isdpfxjx Sbp Ro Ahkjtf
Stanje: dobro
Dno: 40%
Mali oglas
Geilenkirchen
846 km
Odprta polprikolica s ponjavo
FLIEGL3 achs Road Runner BPW 385 /65 I Lock Bl
Pokliči
Stanje: rabljeno, lastna masa: 5.905 kg, največja dovoljena obremenitev: 33.095 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2024, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.800 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, Leto izdelave: 2024, Oprema: ABS, Nemško vozilo
Kot novo, prevoženih le cca 30.000 km
Prva registracija: 6.5.2024
Fliegel SDS 390 Roadrunner
Skupna masa: 39.000 kg
Lastna masa: 5.905 kg
Itodpsynkikjfx Ahksf
Nosilnost: 33.095 kg
BPW osi
I-Lock
Blitz ponjava
Velikost pnevmatik: 385/65 R 22,5
Ponjava z napisi, fotografije so retuširane
Možne dodatne storitve!
Izvozne registrske tablice (rdeče / 30 dni) Nemčija
Kratkotrajne tablice (rumene / 5 dni) Nemčija
Prevozna dovoljenja Avstrije je možno posredovati
Dostava vozil (za doplačilo)
Podatki na spletu so nezavezujoči opisi in ne predstavljajo jamčenih lastnosti. Prodajalec ne odgovarja za napake, vnosne ali prenosne napake podatkov. Prodaja vmes mogoča. Prodaja samo poslovnim uporabnikom. Veljajo izključno naši splošni pogoji.
Mali oglas
Dortmund
815 km
Platforma
FaymonvilleMAX Trailer 3-Achs-Mega-Tele-Plateau-Radmulden
Pokliči
Stanje: novo, lastna masa: 9.500 kg, največja dovoljena obremenitev: 35.500 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R 19.5, barva: siv, obratovalna teža: 9.500 kg, Oprema: ABS, Loading platform in extendable design:
Loading platform with hardwood planks, rear bevel approx. 1,000 mm x 8°
1 pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm
2 pairs of lashing rings (LC 5,000 daN)
1 pair of lashing rings (LC 10,000 daN)
6 pairs of fold-out lashing rings on the outside (LC 5,000 daN)
2 pairs of fold-out lashing rings on the outside (LC 10,000 daN)
Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN)
Brake system:
Brake system as per EU regulations with EBS-E (2S2M)
Paintwork:
Premium, long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer
High-quality single-colour 2-component (2K) top coat in Nova grey
Rear section metallized and painted in RAL 9010 (Pure White)
No metallic paint possible
Landing gear:
JOST mechanical landing gear with 2-speed gearbox for 24t lifting capacity (50t test load)
Steel construction:
Steel construction from high-tensile fine-grain steels
Steel grades:
S355J2+N/S355MC (yield strength 355 MPa)
S690QL/S700MC (yield strength 690 MPa)
Electrical system:
Electrical system according to EU regulations, 24 volt lighting
Sockets: 24N, 24S & 15-pin
Axles and tyres:
Isdek Eammspfx Ahketf
BPW axles, air suspension, with disc brakes (377 mm), with lift/lower function
Trailing steering axles with electro-magnetic reversing lock, actuated via reverse gear or manually
Axle tool
Tyres: 435/50 R 19.5
Accessories included:
At the galvanized front connection strip: yellow-red air couplings
4 wheel chocks with brackets
2" kingpin
Galvanized steel front wall approx. 1,600 mm high, EN12642-XL
White reflective tape to EU standards on the sides, extension section and red at the rear
Loading platform with heavy-duty hardwood floor
9 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform
1 spare wheel holder under the platform on the right (direction of travel)
Galvanized folding supports under the rear slope of the loading area
Sliding mounting rails for ALU loading ramps at the rear of the vehicle
European reflective plates (red-yellow) at the rear of the semi-trailer
One mudflap at the rear of the semi-trailer
Bracket for a rotating beacon at the rear of the semi-trailer
At the gooseneck and on the rear panel left and right, each with a bracket for warning panels including socket
One HDPE toolbox 620x360x610 under the platform on the left (direction of travel)
4 pairs of WADER container locks in the platform for 1x 20ft container or 1x 40ft container; additional locking position in the extension for a 45ft container
3 pairs of transverse stake pocket rails on the platform for 100 x 50 mm plug-in stanchions
Lift axle on the front axle with control via TEBS E, depending on current axle load and loading condition
Speed stickers 80 km/h on the rear and both sides
Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light. Mounting for rotating beacon on warning boards
Load gauge including axle load diagram
HRM metallization (High Resistance Metallisation) of the outer frame
Complete steel structure shot blasted, then specified visible surfaces metallized
Mali oglas
Dortmund
815 km
Nizki nakladalnik
FaymonvilleMAX Trailer 3-Achs-Mega-Tele-Plateau-zwangsgel.
Pokliči
Stanje: novo, lastna masa: 10.600 kg, največja dovoljena obremenitev: 35.400 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 940 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Loading area:
- Loading deck in extendable design
- Loading deck with hardwood planks, rear bevel approx. 500 mm x 8°
- 2 pairs of lashing rings (LC 5,000 daN)
- 1 pair of lashing rings (LC 10,000 daN)
- 6 pairs of outward-folding lashing rings (LC 5,000 daN)
- 3 pairs of outward-folding lashing rings (LC 10,000 daN)
- Cut-outs in the loading deck's external frame for attaching tension belts
Braking system:
- Braking system in accordance with EU regulations, with EBS-E (2S2M)
Painting:
- First-class, durable corrosion protection for the standard shot-blasted welded frame guaranteed by a two-component (2K) zinc-rich primer
- High-quality two-component (2K) top coat in solid Novagrey
- Rear section metallised and painted in RAL 9010 (pure white)
- Metallic paint not available
Landing gear:
- JOST mechanical landing gear with 2-speed gearbox, 24t lifting capacity (test load 50t)
Steel construction:
- Steel structure made from high-strength fine grain steels
- Steel grades:
- S355J2+N/S355MC (yield strength 355 MPa)
- S690QL/S700MC (yield strength 690 MPa)
Electrical system:
- Electrical system according to EU regulations, LED lighting 24 Volt
- Sockets: 2x 7-pin & 15-pin
Axles and tyres:
- BPW axles, air suspended, with disc brakes (377 mm), with lifting/lowering function
- Hydro-mechanically forced steering
- Axle tools
- Twin tyres 235/75 R 17.5
Accessories included:
- Yellow-red air couplings at the galvanised front connection bar
- 4 wheel chocks with holder
- 2" king pin
- Galvanised steel headboard approx. 1600 mm high
- White reflective tape on the sides, sliding section and rear in red in accordance with EU regulations
- Loading deck with heavy-duty hardwood floor
- Rear and front steering by cable
- Remote control via push buttons, with single-track monitoring of the axles
- With wireless remote control for rear steering
- 9 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the loading deck
- Galvanised folding supports under the loading deck bevel
- Sliding mounting rail for aluminium loading ramps at the rear of the vehicle
- European reflective panels (red-yellow) at the trailer rear
- One mud flap at the trailer rear
- Mount for a beacon at the trailer rear
- Mounts for warning boards including socket on gooseneck and rear panel, each left and right
- Stainless steel toolbox INOX 1,500 x 390 x 810 under the loading deck, right side in driving direction
- Central lubrication system BEKAMAX (Pico) with NLHI-2 multipurpose grease and removable protection around pump
- 6 pairs of WADER container locks on the loading deck for 1x 20ft, 2x 20ft or 1x 40ft containers, additional locking for one 45ft container in extendable section
- 4 pairs of crosswise stake pocket strips mounted in the loading area for 100 x 50 mm plug-in stakes
- Lift axle on the first axle, controlled by TEBS, dependent on current axle load and load condition
- 80 km/h speed stickers at the rear and on both sides
- Four extendable warning boards ca. 400 mm (approx. 423 x 423 mm) with LED position light
Itsdpfxjl Ux Rws Ahkef
- Beacon mount on the warning boards
- Load gauge for axle load determination, including load diagram
- HRM metallisation (High Resistance Metallisation) on the external frame
- Complete steel construction shot-blasted, then all defined visible areas metallised with ZINACOR 850 (85% zinc, 15% aluminium) by thermal spraying
Mali oglas
Dortmund
815 km
Platforma
FaymonvilleMAX Trailer 3-Achs-Doppeltele-Plateau zwangsgel.
Pokliči
Stanje: novo, lastna masa: 11.300 kg, največja dovoljena obremenitev: 36.700 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.250 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 r 22,5, barva: sivo-črna, Oprema: ABS, Loading platform:
Loading platform in extendable design with pneumatically operated locking mechanism
A fixed intermediate table, approx. 250 mm wide, is mounted on the central beam
8 pairs of lashing rings, foldable outwards (LC 5,000 daN)
3 pairs of lashing rings, foldable outwards (LC 10,000 daN)
Openings in the outer frame of the loading platform for attaching tensioning straps (LC 2,000 daN)
Axles and tyres:
BPW axles and suspension, all axles with hydro-mechanical forced steering
Disc brakes, technical axle load: 10,000 kg
Air suspension with lift and lower valve
Axle tools
6 tyres, size 385/65 R 22.5
Brake system:
Ijdpfx Ashlz Shshkotf
Brake system according to EU regulations with EBS-E (2S2M)
Landing gear:
JOST landing legs (mechanically operated) with 2-speed gearbox for 24 t lift load (50 t test load)
Steel construction:
Steel construction made of high-strength fine-grained steels
Steel grades:
S355J2+N/S355MC (yield strength 355 MPa)
S690QL/S700MC (yield strength 690 MPa)
Electrical system:
Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
ASPÖCK-UNIBOX mounted on the front terminal board with 24N, 24S & 15-pin sockets
Connections according to ISO:
24N ISO-1185
24S ISO-3731
15-pin ISO-12098
Paintwork:
First-class, long-lasting corrosion protection of the standard grit-blasted welded frame, guaranteed by a 2-component (2K) zinc-dust primer
High-quality, single-colour 2-component (2K) top coat in Novagrau
Rear section metallised and painted in RAL 9010 (pure white)
No metallic paint finish possible
Included accessories:
At the gooseneck and at the rear plate, left and right, each with a bracket for warning signs, including socket
Remote steering from the front and rear via cable remote control with push buttons, with single-track control of the axles
Electro-hydraulic unit
4 wheel chocks with brackets on the front wall
2" kingpin
A galvanised steel front wall approx. 2,200 mm high
Yellow-red air couplings on the galvanised front terminal board
White reflective tape on the side, at the extension and rear in accordance with EU regulations, red at the rear
European reflective plates (red-yellow) on the rear of the trailer
One mud flap on the rear of the trailer
Manual and documentation
Bracket for a revolving warning light at the rear of the trailer
Loading platform with approx. 30 mm thick wooden floor set in omega profiles
10 pairs of stake pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading platform
1 spare wheel holder under the loading platform on the right-hand side in the driving direction
6 pairs of WADER container locks in the loading platform, for 1x 20ft container, 2x 20ft containers or 1x 40ft container; in the extension, an additional locking position is provided for a 45ft container
5 pairs of stake pocket strips, mounted transversely in the loading platform, for plug-in stanchions 100 x 50 mm
A galvanised bracket mounted transversely under the loading platform (2,390 x 720 x 400 mm)
Access ladder mounted on the right in the direction of travel
One HDPE toolbox 1,200x500x480 mounted at the front under the loading platform on the left in the direction of travel
Lift axle on the front axle with control via TEBS E depending on the current axle load and loading status
Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable protection around the pump
Red/white reflective tape on the extension of the loading platform
On the central beam,
Mali oglas
Bovenden
710 km
Polpriklopnik za hlodovino
Gsodam 3-Achs Holzauflieger, Liftachse
Pokliči
Stanje: rabljeno, lastna masa: 6.280 kg, največja dovoljena obremenitev: 31.720 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2019, naslednji pregled (TÜV): 03/2024, dolžina tovornega prostora: 13.000 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22.5, barva: črn, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden. 3 axles, SAF axles, air suspension, liftable first axle, raise/lower function, ABS (anti-lock braking system), underride protection, side aluminum underrun protection, landing legs, storage box, stakes.
Iedpfxsp Np Rgj Ahkstf
Body: 3-axle timber transport trailer with 8 Gsodam stake racks. 3 x 9 t SAF axles, disc brakes, first axle liftable. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!
Mali oglas
Egestorf
860 km
Priklopnik z delovno ploščadjo
MÜLLER-MITTELTAL3-Achs Plateau, luftgefedert, hydr. Rampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * PT 30 Profile:
* EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 3 x 11 t Gigant axles
* Air suspension with lift and lower system and RtR-valve
* Smart Board installed on trailer as information tool (axle load display - separate for front and rear)
* Tire pressure monitoring with display option in the truck via EBS signal without truck-side installation
* Side underrun protection
* Swivel supports at rear of chassis frame
* Mechanically adjustable warning sign packages at front and rear
* Front axle: plastic quarter mudguards with spray protection
* Rear axle: straight galvanized steel skirts with spray protection
* Contour tape on sides and rear, reflective
* 15-pin power plug
* LED lighting 12 / 24 V
* LED beacon (removable) at rear
* Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle
* Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, black powder coated, side right
* Compartment in rotary frame for accessories with folding lid, 2 pcs. container locks permanently installed (directly after turntable platform)
* ROBOT welded anti-slip coating on the steel plate of the rotary frame platform (protruding weld seams)
* Load securing package consisting of: 2 lashing rings (13.4 t) at front left & right on front wall bearer, front & rear 1 pair of UVV lashing rings (13.4 t), and on each side 3 pairs of UVV lashing rings (10 t) pivotable and lowerable, loadable in all directions and embedded in the outer frame, each side with 3 stake pockets with simultaneous 2 t lashing option
* 6 pairs mechanical folding outriggers for 3 m total width (not in the rear taper)
* Extension boards stored in the middle of the loading area
* Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm
* Mechanically laterally adjustable
* 4-way control block for later retrofitting of hydraulic ramp shift
* Excavator arm storage over rear axle, continuous to end crossmember (total length approx. 2,100 mm)
* 2 pairs of lashing rings LC 6400 daN in excavator arm storage at side in longitudinal frame
* 2 steps galvanized at rotary frame left + right
* Profifix lashing strip centered in longitudinal axis, in flat area for lashing up to LC 3000 daN
* Chassis, turntable, folding outriggers, drop supports, and drive-on ramps hot-dip galvanized
* Axles, slewing ring, air tank, tow bar painted in black tone
* Loading edge loaded approx. 910 mm +/- 20 mm air suspension
* New vehicle with manufacturer warranty
* Errors and intermediate sale excepted
* Available approx. from week 22/2026
* Sample images
Ijdjtplwispfx Ahkstf
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTAL3-Achs Plateau, luftgefedert, hydr. Rampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * PT 30 Profile:
* EBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t Gigant axles
* Air suspension with lifting and lowering function, including raising/lowering (RtR) valve
* Smart-board infotool mounted on trailer (for separate axle load display front/rear)
* Tire pressure monitoring with display option in the truck via EBS signal—no installation required on the truck side
* Side underrun protection
* Rear swing-down support legs on chassis frame
* Mechanically adjustable warning sign packages front and rear
* Front plastic quarter mudguards with splash guards
* Rear straight galvanized steel skirts with splash guards
* Reflective contour tape on sides and rear
* 15-pin power connector
* LED lighting 12 / 24 V
* Removable LED beacon at rear
* Drawbar, 1,200 mm long with 40 mm towing eye, height adjustable via drawbar spring & turnbuckle
* Tool box made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted on right side
* Box in turntable for accessories with folding lid, 2 container locks permanently installed (directly behind the turntable platform)
* Robot-welded anti-slip coating on the steel plate of the turntable platform (projecting weld beads)
* Load securing package consisting of: 2 lashing rings (13.4 t) front left & right on bulkhead support, 1 pair each of UVV lashing rings (13.4 t) at front & rear, and 3 pairs UVV lashing rings (10 t) on each side, swiveling and lowerable, loadable in all directions and recessed into the outer frame, 3 stake pockets per side with simultaneous 2 t lashing capability
* 6 pairs of mechanical folding outriggers for a total width of 3 m (not in the rear slope)
* Widening boards stored in the center of the loading area
* Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm
* Mechanically side-adjustable
* 4-way control block for future retrofitting of hydraulic ramp shift
* Excavator arm storage above rear axle, continuous up to end cross member (total length approx. 2,100 mm)
* 2 pairs of lashing rings LC 6,400 daN in the excavator arm storage, mounted on the side in the longitudinal frame
* 2 galvanized steps on turntable left & right
Itodpsxptn Rjfx Ahkjf
* Profifix lashing rail along the longitudinal axis in the center, on flat area, lashing capacity up to LC 3,000 daN
* Chassis, turntable, folding outriggers, drop legs and drive-on ramps hot-dip galvanized
* Axles, turntable ring, air reservoirs, towing fork painted black
* Loading edge height approx. 910 mm +/- 20 mm (depending on air suspension)
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Available approx. from week 22/2026
* Sample images
Mali oglas
Dortmund
815 km
Platforma
FaymonvilleMAX Trailer 3-Achs-Plateau-Sattelaufl.
Pokliči
Stanje: novo, lastna masa: 6.350 kg, največja dovoljena obremenitev: 38.650 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, Loading Platform:
- 2 pairs of folding external lashing rings (LC 5,000 daN)
- 24 pairs of cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN)
Landing Legs:
Iedpfoiu Etksx Ahkjtf
- JOST mechanical landing legs with 2-speed gearbox, 24 t lifting capacity (50 t test load)
Axles and Tyres:
- BPW axles, air suspended, with disc brakes (430 mm), lift/lower function
- Tyres: 385/65 R 22.5
Braking System:
- WABCO braking system compliant with EU regulations featuring EBS-E (2S2M)
Paintwork:
- Premium and durable corrosion protection of the standard grit-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer
- High-quality 2-component (2K) top coat in single-tone MB 7350 Novagrau
- Rear section metallized and painted in RAL 9010 (pure white)
- Metallic paintwork not possible
Steel Construction:
- Steel construction made from high-strength fine-grained steels
- Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Electrical System:
- Electrical system in accordance with EU regulations
- Lighting: 24 volt
- ASPÖCK-NORDIK (ASS3)
- ASPÖCK-UNIBOX at the front connection bar with 24N, 24S, and 15-pin sockets
- Connection standards:
- 24N ISO-1185
- 24S ISO-3731
- 15-pin ISO-12098
Accessories included:
- Yellow-red air couplings at the galvanized front connection bar
- 4 wheel chocks with holders
- 2" king pin
- Galvanized steel front wall approx. 1,600 mm high, EN12642-XL
- White reflector tape according to EU regulations, lateral and rear red
- European reflective panels (red-yellow) at the rear of the trailer
- Loading platform with approx. 30 mm thick hardwood flooring, framed in omega profiles
- 10 pairs of stanchion sockets for 100 x 50 mm plug-in stakes in the outer frame
- 3 pairs of transverse stanchion rack strips, fitted in the loading platform, for 100 x 50 mm plug-in stakes
- Bracket for 1,000 mm plug-in stakes, rear in the central beam
- 1 spare wheel carrier under the loading platform on the right hand side
- 1 mudflap at the rear of the trailer
- Manual and description on USB stick
- Bracket for beacon at the rear of the trailer
- Holders for warning signs including socket at the gooseneck and left/right rear panel
- 6 pairs of WADER container locks on the loading platform for 1x 20ft, 2x 20ft, or 1x 40ft container, flush with rear
- 80 km/h speed stickers at the rear and both sides
- Four warning signs, extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light
- Load gauge for axle load determination including load diagram
- HRM (High Resistance Metallisation) of the outer frame
- Complete steel structure is grit blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - aluminium 15%) by hot coating
Znak zaupanja
Prodajalci, certificirani pri TruckScout24

Mali oglas
Dortmund
815 km
Platforma
FaymonvilleMAX Trailer 3-Achs-Mega-Tele-Plateau-nachlaufgel.
Pokliči
Stanje: novo, lastna masa: 8.300 kg, največja dovoljena obremenitev: 36.700 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.080 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22.5, barva: siv, Oprema: ABS, dvižna zadnja plošča, Loading platform:
Loading platform in extendable design with pneumatically operated locking mechanism
Cutouts in the outer frame of the loading platform for attaching lashing straps
Landing legs:
JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity
Axles and tires:
BPW axles, air-suspended, with disc brakes (430 mm), with lift/lower function
Trailing steering axle with electromagnetic reverse lock, activated via reverse gear or manually
Axle tools
Tires 385/65 R 22.5
Braking system:
WABCO braking system in accordance with EU regulations with EBS-E
Paintwork:
Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer
A high-quality single-color 2-component topcoat in MB 7350 Novagrau
Rear section metallized and painted in RAL 9010
No metallic paint available
Steel construction:
Steel construction made of high-strength fine-grained steels
Steel grades:
S355J2+N / S355MC
S690QL / S700MC
Electrical system:
Electrical system in accordance with EU regulations
Lighting: 24 Volt ASPÖCK-NORDIK
ASPÖCK-UNIBOX at the front connection bar with 24N, 24S and 15-pin sockets
Connection according to ISO
Accessories included:
Front galvanized connection bar with yellow-red air couplings
One galvanized steel front wall approx. 1,600 mm high, EN12642-XL
4 wheel chocks with holders
White reflector tape according to EU regulations on the sides, on the extension, and in red at the rear
European reflective plates at the rear of the trailer
Loading platform with approx. 30 mm thick hardwood floor enclosed in omega profiles
10 pairs of stake pockets for insertable stakes 100 x 50 mm in the outer frame of the loading platform
1 spare wheel holder under the loading platform, right-hand side in the direction of travel
Manual and description
One holder for a rotating beacon at the rear of the trailer
On the gooseneck and each side of the rear plate (left and right), a bracket for warning panels incl. socket
Anti-slip sand layer painted onto the central beam
6 pairs of WADER container pockets in the loading platform, for 1x 20ft container, 2x 20ft containers, or 1x 40ft container; the extension includes an additional locking point for one 45ft container
4 pairs of transverse stake pocket rails mounted in the loading platform for plug-in stakes 100 x 50 mm
One galvanized holder transversely under the loading platform, 2,390 x 720 x 400 mm
Access ladder mounted right-hand side in direction of travel
Front axle lift axle with control via TEBS E depending on current axle load and load status
Load manometer for determining axle loads, including load chart
Itjdpfxoikyh Hj Ahkjf
HRM metallization of the outer frame: complete steel structure shot-blasted, then the defined visible surfaces metallized hot-finished with ZINACOR 850
Mali oglas
Dortmund
815 km
Platforma
Faymonville3-Achs-Mega-Tele-Plateau zwangsgelenkt
Pokliči
Stanje: novo, lastna masa: 10.000 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 51.600 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Loading Platform:
- Gooseneck, length approx. 4,100 mm with central beam
- Extendable loading platform, length approx. 9,500 mm with rear taper approx. 350 mm x 10° and integrated hook-on bar for attaching loose ALU approach ramps
- Pneumatic locking system with conical locking bolts and reinforced locking positions
- Supply lines are protected inside the extendable beams and automatically adjust to the respective platform length
Axles, Suspension, and Tyres:
- BPW axles and suspension, all axles hydro-mechanically forced steered
- Mounted on turntable
- Technical axle load: 12,000 kg
- Air suspension with lift and lower valve
- Tyres 235/75 R17.5, twin-mounted
Paintwork:
- 6-coat surface treatment
- Complete steel structure shot-blasted after welding
- One coat of zinc-based primer, one coat of adhesion primer
- Final paintwork with 2 layers of 2-component (acrylic) paint, single colour in MB 7350 Novagrau, followed by cavity sealing with special wax
Steel Structure:
- Steel structure made from high-strength fine-grained steels
- Steel grades:
- S355J2+N/S355MC (yield strength 355MPa)
- S690QL/S700MC (yield strength 690MPa)
- Welders certified according to DIN-EN 287-1
- Welding process MAG according to EN ISO 4063, shielding gas M21 according to EN ISO 14175
Accessories:
- Steel front wall, approx. 1,600 mm high
- Round NATO socket at the front connection strip
- 3 kW electro-hydraulic unit for controlling hydraulic functions
- 4 pairs of recessed lashing rings in the outer frame of the gooseneck
- 4 pairs of stake pockets integrated into the outer frame of the gooseneck for stakes approx. 100x50 mm
- 1 transverse stake pocket strip mounted in the floor of the gooseneck for stakes approx. 100x50 mm (1x rear on gooseneck)
- 2'' kingpin
- Mechanical landing legs with 2-speed gearbox and hand crank
- JOST Module B – static test load = 50,000 kg
- On the gooseneck and loading area, approx. 32 mm wooden flooring in ALU-omega profiles
- One locking position on the extension, approx. every 500 mm
- 10 pairs of recessed folding lashing rings in the outer frame of the loading area, folding outwards
- 6 pairs of stake pockets integrated into the outer frame of the loading area for stakes approx. 100x50 mm
- 2 transverse stake pocket strips mounted in the floor of the loading area for stakes approx. 100x50 mm
- INOX toolbox approx. 1,250 x 500 x 550 mm
- Tapered end crossmember of the vehicle, approx. 350 mm 10°
- Integrated hook-on bar for loose ALU approach ramps at the rear crossmember of the vehicle
Itodpfxjiuy Nle Ahksf
- 1 pair of drop tube supports at the rear crossmember
- Mudguards on all axles
- Central lubrication system with 1 pump
- Remote steering from front and rear operable via cable remote control with push button, including single-track monitoring of the axles
- Under the gooseneck and at the rear crossmember, left and right, each with a 7-pin socket for warning panels
- One 7-pin socket at the rear crossmember
- Container locks "TWIST-LOCKS" in the loading area for transport of 2x 20ft and 1x 40ft containers
- Radio remote control for rear steering in addition to cable remote control, with 2 indicator lights on the receiver for single-track monitoring
- 2 axle load gauges + axle load diagram
- 4 warning panels approx. 423 x 423 mm, extendable by approx. 400 mm
- Standard HRM Metallization (High Resistance Metallisation) of the outer frame
- Complete steel structure shot-blasted, then defined visible areas hot-coated in metallic finish using ZIN
Mali oglas
Dortmund
815 km
Nizki nakladalnik
FaymonvilleMAX Trailer-3-Achs-Mega-Tele-Plateau-nachlaufgel.
Pokliči
Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R 19.5, barva: siv, Oprema: ABS, Loading platform:
- Loading platform in extendable design with pneumatically operated locking mechanism
- 2 pairs of lashing rings (LC 5,000 daN)
- 1 pair of lashing rings (LC 10,000 daN)
- 6 pairs of fold-out lashing rings (LC 5,000 daN)
- 2 pairs of fold-out lashing rings (LC 10,000 daN)
- Cutouts in the outer frame of the loading platform for attaching tension belts
Axles and tires:
- BPW axles, air-suspended, with disc brakes (377 mm), equipped with lifting/lowering function
- Self-steering axles with electromagnetically controlled reverse lock, activated via reverse gear or manually
- Axle tools
- Tires: 435/50 R 19.5
Brake system:
- Brake system in accordance with EU regulations with EBS-E (2S2M)
Paintwork:
- Premium, durable corrosion protection for the standard shot-blasted welded frame by means of two-component (2K) zinc dust primer
- High-quality two-component (2K) top coat in solid Novagrau
- Rear end metallized and painted in RAL 9010 (pure white)
- Metallic paint not available
Landing gear:
- JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load)
Steel construction:
- Steel structure made of high-strength fine-grained steels.
- Steel grades:
- S355J2+N/S355MC (yield strength 355 MPa)
- S690QL/S700MC (yield strength 690 MPa)
Electrical system:
- Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDICK (ASS3) lighting
- ASPÖCK-UNIBOX on the front connection console with 24N, 24S & 15-pin sockets
- Connections according to ISO standards:
- 24N ISO-1185
- 24S ISO-3731
- 15-pin ISO-12098
Accessories included:
- Yellow-red air couplings at the galvanized front connection strip
- 2 wheel chocks with holder
- 2" kingpin
- A galvanized steel front wall approx. 1,600 mm high
- Yellow reflective tape as per EU regulations, on the sides, on the extension and at the rear of the trailer
- European reflective signs (red-yellow) at the rear of the trailer
- Loading area with approx. 38 mm thick hardwood floor
- 10 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the platform
- 1 spare wheel holder beneath the loading area on the right in the direction of travel
- User manual and documentation on USB stick
- One mudflap at the rear of the trailer
- Bracket for a revolving beacon at the rear of the trailer
- On the gooseneck and on the rear panel, left and right, each a bracket for warning boards including socket
- One INOX toolbox transversely mounted beneath the platform (1,000x400x2,500mm)
- 6 pairs of WADER container locks in the platform for 1x 20ft container, 2x 20ft containers or 1x 40ft container; an additional locking point is provided in the extension for a 45ft container
- 3 sets of crosswise post pocket bars mounted in the platform for 100 x 50 mm plug-in posts
- 60 km/h speed sticker on the rear
- 2 reversing spotlights mounted on the rear panel
- Four warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with a position light
- Mounting bracket for rotating beacon on the warning sign
- HRM metallization (High Resistance Metallisation) of the outer frame
- Entire steel structure shot-blasted, the defined visible surfaces then hot-finished with ZINACOR 850 metallisation (zinc 85% - aluminum 15%)
Itedpei Dwlwefx Ahkjf
Mali oglas
Dortmund
815 km
Platforma
FaymonvilleMAX Trailer 3-Achs-Tele-Plateau-zwangsg.
Pokliči
Stanje: novo, lastna masa: 9.300 kg, največja dovoljena obremenitev: 38.700 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.200 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, barva: sivo-črna, Oprema: ABS, Cargo Area:
• Extendable cargo area with pneumatically operated locking mechanism
• Cargo platform with approx. 30 mm thick timber flooring
• 7 pairs of external folding lashing rings (LC 5,000 daN)
• 3 pairs of external folding lashing rings (LC 10,000 daN)
• Cutouts in the outer frame of the cargo area for attaching tensioning straps (LC 2,000 daN)
Axles and Tyres:
• BPW axles and suspension, all axles hydromechanically forced-steered
• Equipped with disc brakes
• Technical axle load: 10,000 kg
• Air suspension with lift and lower valve
• Axle tool kit
• Tyres: 385/65 R 22.5
• TPMS tire pressure monitoring system compliant with ECE R 141
Brake System:
• WABCO braking system in accordance with EU regulations with EBS-E (2S2M)
Electrical System:
• Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
• ASPÖCK-UNIBOX at the front control strip with 24N, 24S & 15-pin sockets
• Connections as per ISO standards
• 24N ISO-1185
• 24S ISO-3731
• 15-pin ISO-12098
Standard Accessories Included:
• Remote-controlled steering from front and rear via cable remote control with push buttons, including single-track axle monitoring
• 4 wheel chocks with holders mounted on the front wall
• 2" king pin
• One galvanized steel front wall, approx. 1,600 mm high
• Yellow-red air couplings at the galvanized front connection strip
• White reflective tape compliant with EU standards on both sides, on extension, and at the rear of the trailer in red
• European reflective plates (red-yellow) at the rear of the trailer
• One mud flap at the rear of the trailer
• Operating manual and instructions
• Mount for a revolving beacon at the rear of the trailer
• Cargo area with approx. 30 mm thick timber floor inset in omega profiles
• 10 pairs of stake pockets (100 x 50 mm) in the outer frame of the cargo bed
• 1 spare wheel holder under the cargo area, right-hand side in the direction of travel
• Electro-hydraulic unit
• At the gooseneck and rear panel left/right, each with bracket for warning signs, incl. socket
• Coated sand layer on the main beam as anti-slip protection
• 6 pairs of WADER container pockets in the cargo area for 1x20ft, 2x20ft or 1x40ft containers; additional locking point provided in the extension for a 45ft container
• 4 pairs of transverse stake pocket rails in the cargo area for plug-in stakes 100 x 50 mm
• Access ladder mounted on the right side in the direction of travel
• One HDPE toolbox approx. 1,200 x 500 x 480 mm at the front under the cargo bed, left in the direction of travel
Ijdpfx Asiu Etrshkstf
• BEKAMAX (Pico) centralized lubrication system with removable pump guard
• Lift axle on front axle, controlled via TEBS E according to dynamic axle load and load status
• Wireless remote control for steering, in addition to cable operation, with indicator lights on receiver for single-track monitoring
• Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm, equipped with position light
• Bracket for revolving beacon on the warning signs
• 80 km/h speed sticker on rear and both sides
• Load gauge for axle load determination, including load chart
• HRM (High Resistance Metallisation) of the outer frame
• Complete steel construction shot blasted; subsequently, defined visible surfaces metallised by hot-dip application with ZINACOR 850 (85% zinc – 15% aluminium)
Olajšamo vam iskanje: "kögel 3 achs plateau liftachse pal.-kasten bpw-achsen"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.

Izvedite več zdaj
+49 201 858 95 507
+49 201 858 95 507
Objavite oglas zdaj
*na oglas/mesec


































































































































































































































































































































































































