Faymonville Max Trailer Max100 Semi-Tieflader Radmulden nakup rabljenega (35.354)

Stanje: novo, največja dovoljena obremenitev: 40.017 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Technical Specification Gooseneck: Gooseneck with rear bevel approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). 30 mm hardwood flooring. Loading platform: 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN). 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN). 1 pair of flat lashing rings at the front end of the platform (LC 10,000 daN). Approx. 48 mm hardwood flooring, over the axle areas with checker plate covering. Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load). Tyres: 205/65 R17.5 tyres, manufacturer’s choice. TPMS: TPMS tyre pressure monitoring system in compliance with ECE R 141. Data transmission to the tractor unit occurs via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be capable of transferring and displaying this data. Axles: BPW axles, two rigid, two self-steering, air-suspended, drum brakes, with lift/lower function. The self-steering axles have an electromagnetic reverse lockout, activated via reverse gear or manually. Axle tool included. Brake System: WABCO braking system in accordance with EU regulations, with EBS-E (4S3M), without connecting lines to the tractor. Electrical System: Electrical system per EU regulations, LED lighting, 24V ASPÖCK-NORDIK (ASS3). All LED side marker lights flash with the indicator. ASPÖCK-UNIBOX on the front connection rail with 24N, 24S & 15-pin sockets. Connections per ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel Construction: High-strength fine-grained steel construction. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: Entire steel construction automatically shot-blasted after welding. Additional blasting with corundum for optimal coating adhesion. HRM-metallisation of entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimal corrosion protection. Final coating with 2 layers of 2K top coat, single-colour to customer choice according to RAL 841GL. Rear section metallised and painted in RAL 9010 (pure white). Metallic paints not possible. Paint finish tested with salt spray test according to ISO 9227-NSS. Cavities sealed with special wax. Options Included: Knsdpfxsw Dl Hqs Ag Esa 2" king pin Galvanised steel front wall. Yellow-red air couplings on galvanised front connection rail. 2 wheel chocks with holder at the front wall. Rear gooseneck ramp mounts for ALU loading ramps. Further options available.

Stanje: novo, skupna masa: 78.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 850 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: • Gooseneck in SNT design to optimize loading area length, approx. 3,700 mm long, rear with a bevel approx. 1,000 mm x 10° • For tractor units: 4 x 2, 6 x 2 and 6 x 4 Ksdsrvw U Sspfx Ag Esna Loading Area: • Extendable loading platform, approx. 8,800 mm long with rear bevel approx. 500 mm x 10° • A recess in the platform and rear bevel to accommodate the excavator dipper stick, approx. 3,950 x 580 x 370/450 mm Ramps: • One pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide • Hydraulically folding ramp tips • Ramps hydraulically adjustable separately approx. 235 mm outwards and approx. 215 mm inwards • Hardwood decking on the beveled part of the loading area • Ramp with hardwood decking • 20 x 30 mm square climbing strips, approx. every 200 mm on the outer frame of the ramp Axles and Tyres: • TWINAXLE-II independent wheel suspension with BPW stub axles, 1st axle steered in advance, all other axles are hydromechanically forced steered • 1st axle with electromagnetic reverse lock via reverse gear and manual activation • Technical axle load: 12,000 kg • Hydr. axle compensation, hydraulic cylinders with shut-off valves • Tyres 245/70 R 17.5 • TPMS tyre pressure monitoring system according to ECE R 141 Accessories Included: • Plug-in steel front wall, approx. 400 mm high • 4 wheel chocks with holder • Front connection bar with yellow-red air couplings • 3 kW electro-hydraulic power pack for hydraulic control, except for hydraulic winches • 1 spare wheel • 2 pairs of screw-in lashing rings • 1 pair of horizontal lashing rings in the rear area of the gooseneck • On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized • On the gooseneck: 1 plug-in ALU rear board, approx. 400 mm high, anodized • Approx. 40 mm thick hardwood decking on the gooseneck, checker plate over the king pin • 3.5" king pin • Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide • Load area locking with conically welded arresting profiles every 250 mm • Incl. pre-tensioning plate • 1 pair of lashing rings on the front cross member • 8 pairs of recessed, fold-out lashing rings in the outer frame of the platform • Extendable (galvanized) widenings approx. 230 mm per side • 1 pair of fixed open wheel recesses up to extension, approx. 700 x 410 mm, in the platform in front of the 1st axle • Wheel recesses with checker plate covering and 15 x 15 mm square climbing strips, approx. every 200 mm • 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm, in the platform between the 1st and 2nd axle • Wheel recesses with 15 x 15 mm square climbing strips and widenings in the lower section • ALU covers for the wheel recesses between 1st and 2nd axle, which can also be used as broadening planks • 1 pair of mechanical rear supports • 20 x 30 mm square climbing strips, approx. every 200 mm on the outer frame of the bevel of the loading area • Central lubrication system with 1 pump, BEKAMAX brand, standard grease as per NLGI-2 • Radio and cable remote control, with 2 indicator lights on the receiver for single wheel control • WABCO Smart Board system • The Smart Board is equipped with an odometer • 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and mounts for rotating beacon

Stanje: rabljeno, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2014, Oprema: ABS, Vehicle Identification No.: WK0S0003000167818 Knjdpfjy Rbtgox Ag Eja Unladen weight: 10,880 kg German MOT (HU) due Gooseneck: 3,500 mm Low bed: Length: 8,650 mm -- Width: 2,520 mm -- Loading height: 900 mm Wheel recesses Extendable with extension lighting Spring ramps: 3,000 mm long x 770 mm wide Storage compartment on gooseneck Kingpin load front: max. 18,000 kg Fifth wheel height: approx. 1,250 – 1,300 mm – Kingpin 2" Axle loads (technical): 3 x 10,000 kg SAF axles with drum brakes Axle 1 = lift axle Axle 3 = trailing/steerable axle Tyres: 235/75 R 17.5 Subject to modifications, prior sale, and errors. The description serves for general identification of the vehicle and does not constitute a warranty in terms of commercial law. The description in the sales contract is binding. Our offer is generally without a new MOT (TÜV) inspection. If a new MOT inspection is required, we will be happy to provide you with an offer from our partner workshops. The vehicle may be labelled or marked with advertising. Our general terms and conditions of delivery and payment apply.

Stanje: rabljeno, največja dovoljena obremenitev: 36.540 kg, skupna masa: 48.500 kg, konfiguracija osi: 3 osi, prva registracija: 06/2020, naslednji pregled (TÜV): 08/2028, Leto izdelave: 2020, Oprema: ABS, Notranja številka vozila: G400133 Takoj na voljo na našem dvorišču v Kaufungenu. Več informacij: * Luis Lucena Kjdpfx Agsy A Uxas Eena * Viktoria Sologubova Nemščina Langendorf SATÜ 30-10,0 M nizkopodvozna prikolica | 3 osi | Niše za kolesa | 36.540 kg nosilnosti Naprodaj je rabljena nizkopodvozna prikolica Langendorf SATÜ 30-10,0 M, izdelana leta 2020. Prikolica ima niše za kolesa, daljinsko upravljanje ter tri osi, od tega sta dve krmiljeni in ena dvigljiva. Z 10.000 mm dolgo nakladalno površino in tehnično nosilnostjo 36.540 kg je ta nizkopodvozna prikolica idealna za transport gradbenih strojev, viličarjev, bagrov in druge težke opreme. Tehnični podatki: * Proizvajalec/model: Langendorf SATÜ 30-10,0 M * Vrsta vozila: Nizkopodvozna prikolica * Prva registracija: 06/2020 * Leto izdelave: 2020 * Osi: 3 * Dve krmiljeni osi * Ena dvigljiva os * Skupna dolžina: 13.900 mm * Dolžina nakladalne površine: 10.000 mm * Tehnično dovoljena skupna masa: 48.500 kg * Lastna teža: 11.960 kg * Nosilnost: 36.540 kg * Niše za kolesa * Daljinsko upravljanje * Tehnični pregled: Nov * Številka vozila: G400133 * Stanje: Rabljeno * Nemško vozilo Ogled je možen po predhodnem dogovoru. Dodatne informacije, fotografije in videoposnetke vam z veseljem posredujemo na zahtevo. Pridržujemo si pravico do sprememb, napak in predhodne prodaje. Angleščina Langendorf SATÜ 30-10.0 M Nizkopodvozna prikolica | 3 osi | Niše za kolesa | 36.540 kg nosilnosti Rabljena nizkopodvozna prikolica Langendorf SATÜ 30-10.0 M, izdelana leta 2020. Ta prikolica ima niše za kolesa, daljinsko upravljanje in tri osi, vključno z dvema krmiljenima osjama in eno dvigljivo osjo. Z 10.000 mm dolgo nakladalno površino in tehnično nosilnostjo 36.540 kg je ta nizkopodvozna prikolica idealna za transport gradbenih strojev, viličarjev, bagrov in druge težke opreme. Tehnični podatki: * Proizvajalec/model: Langendorf SATÜ 30-10.0 M * Vrsta vozila: Nizkopodvozna prikolica * Prva registracija: 06/2020 * Leto izdelave: 2020 * Število osi: 3 * Dve krmiljeni osi * Ena dvigljiva os * Skupna dolžina: 13.900 mm * Dolžina nakladalne površine: 10.000 mm * Tehnično dovoljena skupna masa: 48.500 kg * Lastna teža: 11.960 kg * Nosilnost: 36.540 kg * Niše za kolesa * Daljinsko upravljanje * Tehnični pregled: Nov * Kataloška številka: G400133 * Stanje: Rabljeno * Nemška prikolica Ogled je možen po predhodnem dogovoru. Dodatne informacije, fotografije in videoposnetke vam z veseljem posredujemo na zahtevo. Pridržujemo si pravico do sprememb, napak in predhodne prodaje. Finančni primer: * Notranja številka: G400133 * Nakupna cena: 57.900,00 € * Akontacija: 10% * Obdobje: 60 * Mesečna rata: 899,02 € * Končna vrednost: 11.380,00 € Če vas ponudba zanima ali jo želite prilagoditi vašim potrebam, nas kontaktirajte (g. Enchev). Veselimo se vašega klica. Pridržujemo si pravico do sprememb. Z veseljem sprejmemo vaše rabljeno vozilo v odkup. Financiranje je možno neposredno pri nas. GOLEC NUTZFAHRZEUGE GMBH Govorimo: nemščina, angleščina, španščina, poljščina, ukrajinščina, ruščina, bolgarščina.

Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Celotno zalogo vozil, ki so na voljo takoj in v kratkem roku, najdete na naši spletni strani - ge.de. Izvleček iz opreme. Celotna oprema na zahtevo. GOSJA VRAT: * Gosja vrat v SNT dizajnu za optimizacijo dolžine tovornega prostora, dolžina približno 3.700 mm, zadnji del s poševnostjo približno 1.000 mm x 6° * Za SZM (prikolico z menjalnikom): 4 x 2 in 6 x 2 * ASPÖCK-UNIBOX * Na gosji vrati in zadnji poševnosti rešetkasta površina z 5 mm jekleno ojačitvijo * 2-palčna kraljevska vlečna glava * Vodilna plošča na gosji vrati za priklopno ploščo, približno 500 mm široka * Okrogla vtičnica NATO na priključni letev spredaj (Maeler & Kaege VG 96 917) Kodpfxoy Auhho Ag Ejna * Na gosji vrati 1 par vstavljivih aluminijastih stranskih platen, približno 400 mm visoke, v anodizirani izvedbi * 1 LED delovna luč, nameščena na levi in desni strani sprednje stene na vrhu, upravljanje preko vklopno/izklopnega stikala (upravljanje delovnih luči iz SZM v tem primeru ni mogoče) TOVORNI PROSTOR: * Tovorni prostor, dolžina približno 9.600 mm, z poševnostjo na zadnji strani približno 900 mm x 6° * Tovorni prostor za gosjo vratjo je hidravlično dvigljiv in spuščljiv, dolžina približno 3.000 mm, nosilnost do približno 9.000 kg * Na dvižni platformi in tovarnem prostoru neprekinjena rešetkasta površina z približno 5 mm jekleno podlago kot dodatna ojačitev, zasnovana za točkovno obremenitev PNEVMATIKE: 235/75 R 17.5 3PMSF, dvojne pnevmatike. Proizvajalec po naši izbiri * Sistem za nadzor tlaka v pnevmatikah (TPMS) v skladu z ECE R 141 OSI: * BPW osi in vzmetenje, 1. in 2. os fiksni, 3. os z zadnjim krmiljenjem * 3. os z elektromagnetno blokado za vzvratno vožnjo, ki se aktivira preko vzvratne prestave in ročno * 1. os z asistenco pri speljevanju * Tehnična obremenitev osi: 12.000 kg na os * Zračno vzmetenje z ventilom za dvig in spuščanje HIDRAVLIČNE RAMPE: * 1 par dvodelnih jeklenih ramp AXS z rešetkasto površino, dolžina približno 4.920 mm in širina približno 900 mm * Hidravlično odpirajoče se konice ramp * Rampe je mogoče posamično hidravlično premikati približno 235 mm navzven in približno 365 mm navznoter * Luči na zunanji strani konic ramp, stikalo poleg upravljanja ramp * Varnostno zaklepanje ramp v vožnji s hitro zaporo * Premazana peskana površina na zunanjem okvirju rampe in na konici rampe * Mehanske opore v obliki padajoče cevi, nameščene ob straneh ramp za podporo pri priključitvi na nakladalne rampe * Upravljalni ventili za hidravlične rampe na desni strani vozila ZAVORNI SISTEM: Zavorni sistem proizvajalca WABCO EBS-E v skladu z uredbami EU OBLIKOVANJE POVRŠINE: * HRM-metalizacija celotnega šasije vozila z ZINACOR 850 (85 % cink/15 % aluminij) za zagotavljanje najboljše zaščite pred korozijo LAKIRANJE: * Prikolica karminsko rdeča (RAL 3002) * Platišča srebrno siva * Stranske platne aluminijaste naravne barve * Pestne osi po proizvajalcu osi * Tabela z lučmi čisto bela (RAL 9010) OPREMA: * Sprednja stena iz jekla, vstavljiva, približno 1.600 mm visoka, vključno s priključno letev za oskrbovalne vodnike za SZM, nameščena približno 1.000 mm od spodnjega roba zunanjega okvirja * Možnost pritrditve pritrdilnih verig na notranji strani sprednje stene, levo in desno, vključno z aluminijasto kadjo pod njimi, na levi in desni strani za shranjevanje verig ali vrvnih zateg * Za sprednjo steno je privijana plošča DELIGNIT debeline približno 12 mm * 2 para privijačnih pritrdilnih obročev dodatno (LC 5.000 daN) * Električni vitel, vlečna sila približno 5.400 kg, z brezžičnim d

Stanje: rabljeno, Leto izdelave: 2018, Faymonville Maxtrailer F-S43-1AAF. Letnik: 2018. 9-tonske osi SAF. Teža: 9961 kg. Največja dovoljena teža: 45.000 kg. Nosilnost čepne prikolice: 18.000 kg. Servo volan za 3 krmiljene osi. 7,5 metra, raztegljiva. Zračno vzmetenje. Orodjarske omare RVS. Knjdpfxozn Nf Ne Ag Esa Radijski daljinski upravljalnik. 1. dvižna os. EBA ABS ALB. Dimenzije nosilne površine: D: 13.550 mm. Š: 2480 mm. V: 1400 mm. V: Aluminijaste plošče: 600 mm. Pnevmatike: 385/65R22,5, 70 %. Številka: 513. Splošni pogoji poslovanja podjetja Heinhuis veljajo za vse oglase, ponudbe in cenitve podjetja Heinhuis, vse pogodbe, sklenjene s podjetjem Heinhuis, in pogajanja, ki jim predhodijo. S kakršnim koli odgovorom potrjujete veljavnost splošnih pogojev poslovanja podjetja Heinhuis in izjavljate, da ste se seznanili s temi splošnimi pogoji poslovanja. Naše cene so izvozne cene brez davka. = Dodatne informacije = Letnik: 2018 Lastna teža: 9.961 kg Nosilnost: 35.039 kg Dovoljena skupna masa: 45.000 kg Raztegljiva nadstavba: Da = Informacije o podjetju = Za več informacij:

Stanje: rabljeno, največja dovoljena obremenitev: 35.600 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2025, naslednji pregled (TÜV): 07/2027, Oprema: ABS, Izvleček – oprema: Gooseneck prikolica: Gooseneck prikolica v izvedbi SNT za optimizacijo dolžine tovornega prostora, dolžina približno 3.700 mm. Gooseneck prikolica na zadnji strani s poševnim robom približno 1.000 mm x 6°. Težavna obremenitev sedla: 18.000 kg Za SZM (posebno vozilo za prevoz): 4 x 2 in 6 x 2 Knjdpezkx Hbefx Ag Esa Tovorni prostor: Raztegljiv tovorni prostor, dolžina približno 9.600 mm, s poševnim robom na zadnji strani približno 900 mm x 6°. Tovorni prostor za gooseneck prikolico je hidravlično dvigljiv in spuščljiv, dolžina približno 3.000 mm. Nosilnost do približno 9.000 kg Rampe: DR-10-900-4920-GR-HV-AXS Par dvodelnih jeklenih ramp AXS s dolžino približno 4.920 mm in širino približno 900 mm. Odprta rešetkasta površina. Hidravlično zložljivi končni deli ramp. Rampe je mogoče posamično hidravlično premikati približno 235 mm navzven in približno 365 mm navznoter. Maksimalna obremenitev in naklon glede na tehnično specifikacijo: C470319 Maksimalni naklon pri spuščenem tovornem prostoru: približno 9° Osi in vzmetenje: Osi in vzmetenje BPW, 1. in 2. os fiksna, 3. os s sistemom sledenja. Težavna obremenitev osi: 12.000 kg Elektro-magnetna blokada za vzvratno vožnjo, aktivira se prek vzvratne prestave in ročno. Zračno vzmetenje z ventilom za dvig in spuščanje. Komplet orodij za osi. Zavorna naprava: Zavorna naprava blagovne znamke WABCO EBS-E v skladu z direktivami EU. Brez povezovalnega kabla za vlečno enoto. Pnevmatike: 235/75 R 17.5 3PMSF, dvojne pnevmatike. Proizvajalec po naši izbiri. Indeks nosilnosti 143/141J (144/144F) Barvanje: 6-plastna končna obdelava: Celotna jeklena konstrukcija po varjenju peskana. 1 plast osnovne barve na podlagi cinka, 1 plast prajmerja. Končna barva z 2 plastmi 2-komponentne barve (akril), enobarvna v barvi RAL 3002 karmin rdeča, nato zapiranje votlin s posebnim voskom. Platišča v srebrni barvi. Večbarvno in posebno barvanje proti doplačilu. Dodatna oprema (vključno): - ASPÖCK-UNIBOX na priključni letev spredaj s vtičnicami 24N, 24S in 15-polna. - 24N priključek v skladu s standardom ISO-1185 - 24S priključek v skladu s standardom ISO-3731 - 15-polni priključek v skladu s standardom ISO-12098 - 3 kW elektro-hidravlična enota za upravljanje hidravličnih funkcij, razen hidravličnih vitlov. - Parkirni položaj na gooseneck prikolici za opozorilne table, ko niso v uporabi. - Zunanji nosilec na gooseneck prikolici z luknjami za pritrditev vijakov za pritrdilne obroče. - Prva luknja je približno 200 mm od sprednjega roba, nato približno vsakih 400 mm. - Ena luknja za pritrditev na zadnji zgornji strani zunanjega nosilca gooseneck prikolice za vijak za pritrdilni obroč. - 1 par vijakov za pritrdilne obroče (LC 10.000 daN). - 3 pari vgrajenih pritrdilnih obročev v notranjosti zunanjega nosilca gooseneck prikolice (LC 5.000 daN). - 3 pari vgrajenih pritrdilnih obročev na sredini gooseneck prikolice (LC 5.000 daN). - 1 par vgrajenih pritrdilnih obročev na zadnji strani na sredini gooseneck prikolice (LC 5.000 daN). - Na gooseneck prikolici in poševnem robu rešetkasta površina s približno 5 mm jeklene pločevine za dodatno okrepitev. - 2 palčni kraljevi zatič. - Vodilna plošča na gooseneck prikolici za sedežno ploščo, široka približno 500 mm. - Mehanske podpore sedla z 2-stopenjsko prestavo in ročico. - JOST Modul B - statična preizkusna obremenitev = 50.000 kg - Neprekinjena rešetkasta površina z 5 mm podlago iz jeklene pločevine kot dodatna okrepitev, zasnovana za točkovno obremenitev: - Zaklepanje tovornega prosto

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, Cryolor semi-trailer for liquid nitrogen, liquid oxygen, liquid argon, gas, CO₂ Manufacturer: Cryolor, France Year of manufacture: 1986 Type: EFM 17000 Total capacity: 17,410 litres Unladen weight: 10,050 kg Gross weight: 22,000 kg Kedpfozbbxpox Ag Ejna Operating pressure: 20 bar Test pressure: 27.32 bar Tank code: R 27.3BN Insulation: Vacuum-insulated This semi-trailer is suitable for the transport and storage of cryogenic, liquefied gases such as nitrogen, oxygen, argon or CO₂. We are happy to provide you with a quote or further information. Please contact us to discuss options, request more details or arrange a viewing.

Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full specifications available upon request. * Gooseneck, approx. 4,100 mm long with central beam * Platform deck, extendable twice, approx. 9,400 mm in length * BPW axles and suspension * All axles hydro-mechanically forced steered * Technical axle load: 12,000 kg * Air suspension with lifting and lowering valve * Tires: 235/75 R 17.5 3PMSF dual mounted Knedpfxowvzg Rs Ag Esa * WABCO brake system, EBS-E * 3 kW electro-hydraulic power unit for hydraulic operations, without installation of supply connections at the tractor unit * 4 pairs of stake pockets recessed into the outer frame of the gooseneck, for insertable stakes approx. 100 x 50 mm * 2-inch king pin * 8 pairs of stake pockets recessed into the outer frame of the platform deck, for insertable stakes approx. 100 x 50 mm * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the deck on the left in the direction of travel * Remote steering from the front and rear via cable remote control with push buttons; with single-track axle monitoring; no installation in the tractor unit * 2 axle load gauges mounted on the left side * Steel front wall, approx. 1,600 mm high * 3 transverse stake pocket strips in the platform deck, for insertable stakes approx. 100 x 50 mm * 1 transverse stake pocket strip in the gooseneck deck, for insertable stakes approx. 100 x 50 mm * 1 additional lockable INOX toolbox under the platform deck * WADER container pockets in the platform deck for transporting: 2x 20' containers or 1x 40' container * Central lubrication system with 2 pumps, brand BEKAMAX * Complete HRM metallization (High Resistance Metallisation)

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 01/2019, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 13.800 mm, skupna širina: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 245/70R17.5, medosna razdalja: 10.160 mm, barva: rdeča, Leto izdelave: 2019, Oprema: ABS, 1 x dvižna os 3 x krmilna os. Daljinsko upravljanje krmiljenja s pomočjo radija. Hidravlična rampa. Kamera. = Dodatne informacije = Konfiguracija osi Dimenzije pnevmatik: 245/70R17.5 Zavore: bobnaste zavore Vzmetenje: Zračno vzmetenje Zadnja os 1: Dvojna montaža; profil pnevmatik levo znotraj: 50 %; levo zunaj: 50 %; desno znotraj: 50 %; desno zunaj: 50 % Zadnja os 2: Dvojna montaža; krmiljena; profil pnevmatik levo znotraj: 30 %; levo zunaj: 30 %; desno znotraj: 30 %; desno zunaj: 30 % Zadnja os 3: Dvojna montaža; krmiljena; profil pnevmatik levo znotraj: 40 %; levo zunaj: 40 %; desno znotraj: 40 %; desno zunaj: 40 % Zadnja os 4: Dvojna montaža; krmiljena; profil pnevmatik levo znotraj: 60 %; levo zunaj: 60 %; desno znotraj: 60 %; desno zunaj: 60 % Knjdpfxezcuxre Ag Esa Teže Lastna teža: 11.344 kg Nosilnost: 54.656 kg Dovoljena skupna masa: 66.000 kg Vzdrževanje APK (tehnični pregled): veljavno do 02.2027 Finančne informacije Cena: na zahtevo Identifikacija Tip številka: N/A F-S44 / KRMILNA OS - DVIŽNA = Podatki o podjetju = VSE CENE SO NETO ZA IZVOZ, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) Govorim tudi rusko. Trudimo se zagotavljati pravilne informacije, vendar iz objavljenega besedila ni možno uveljavljati nobenih pravic.

Stanje: novo, največja dovoljena obremenitev: 36.410 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including vehicles available immediately or at short notice, can be found on our website. Excerpt from the equipment. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design to optimize load bed length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front bulkhead, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electric-hydraulic unit for hydraulic operations, excluding hydraulic winches * Approx. 40 mm thick hardwood cover above the gooseneck * 2-inch kingpin * Guide plate from the gooseneck for the fifth-wheel plate, approx. 500 mm wide * Receptacle at the rear of the gooseneck for aluminum drive-on ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the bulkhead * 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inner chassis rail) EQUIPMENT: * Load bed approx. 8,800 mm long, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * Recess in the load bed including the rear slope to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, with protected supply lines inside the extendable beams, automatically adapting to the respective load bed length * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steering-following Kodey Auh Ispfx Ag Ejna * 3rd axle with electromagnetic reverse lock, activating via reverse gear or manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires. Make at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous and between-axle interrupted approx. 50 mm hardwood planking on load bed (increasing coefficient of friction) * 1 cross table, approx. 300 mm wide, for the extendable tube with large cross-section; cross table with offset load bed and extendable mounting rails for aluminum bridging elements * Load bed locking with conically welded locking profiles every approx. 250 mm, including pretensioning plate * 1 pair of lashing rings on front crossbeam (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck crossbeam, approx. 700 x 410 mm (W x D) * Wheel recesses with approx. 15 x 15 mm square climbing strips and widened sections at the lower area (if vehicle is fitted with extendable widenings) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load bed between 1st and 2nd axle * Wheel recesses with approx. 15 x 15 mm square climbing strips and widenings in lower area * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, can also be used as widening planks (if vehicle is fitted with extendable widenings) * Aluminum elements lockable on the extension beams of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasted and painted in single color according to RAL code

Stanje: novo, skupna masa: 80.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Further vehicles available – excerpt from the equipment list. Full equipment details on request. GOOSENECK: * Gooseneck in SNT design for optimized loading bed length, length approx. 3,700 mm, rear with chamfer approx. 1,000 mm x 10° * For tractor units: 4x2, 6x2, and 6x4 * Front steel bulkhead, plug-in, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for controlling hydraulic functions (excluding hydraulic winches) * Outer beams of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair horizontal lashing rings at the rear section of the gooseneck (LC 10,000 daN) * On the gooseneck: 1 pair removable ALU side boards approx. 400 mm high, anodized finish * On the gooseneck: 1 removable ALU rear board approx. 400 mm high, anodized finish * Over the gooseneck: approx. 40 mm hardwood flooring, over the king pin checker plate covering * 3.5-inch king pin * Gooseneck guide plate for the fifth-wheel plate, approx. 500 mm wide * Round NATO socket at the front connection bar (Maeler & Kaege VG 96 917) * 2 pairs of suspended lashing rings with retaining spring on the outer beams of the gooseneck (LC 5,000 daN) Kedpfoxarmasx Ag Esna LOADING BED: * Loading bed, extendable version, length approx. 8,800 mm with chamfer at the rear approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced locking positions, supply lines are protected within the extendable beams and automatically adapt to the respective bed length * BPW axles and suspension, first axle hydraulically steered, all other axles hydro-mechanically forced steered * First axle with electro-magnetic reverse lock, activated by reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * 235/75 R 17.5 3PMSF twin tyres – manufacturer at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load = 50,000 kg * Continuous hardwood flooring (approx. 50 mm thick) on the bed and between axles (interrupted), increasing friction coefficient. – Slots for attachable and adjustable bridging elements * At the front of the bed – 1 movable intermediate table approx. 300 mm wide for the large-section telescopic tube, with checker plate covering. – Front and rear slots for attachable and adjustable bridging elements * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 7 pairs of recessed folding lashing rings on the outer frame of the bed (LC 10,000 daN) * Extensions (galvanized), extendable by approx. 230 mm per side (without wooden planks) * 1 pair mechanical rear supports * Remote-controlled steering from front and rear via cable remote control, with single-track control of axles, without installation in the tractor unit * TPMS tire pressure monitoring sensors installed in all wheels * Locking of the bed with conically welded retaining profiles every 500 mm * Locking control left and right on the trailer * For the intermediate table approx. 300 mm wide, a mechanical lock for securing the table in the extension * 5 pairs of threaded blocks on the extendable beam for mounting M20 screw rings (LC 5,000 daN) BRAKING SYSTEM

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 Knedpfx Agorgzv Ne Eja * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Stanje: novo, največja dovoljena obremenitev: 50.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment specification. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. length 3,700 mm, with rear bevel of approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * 1 pair of detachable ALU side walls, approx. 400 mm high, anodized finish * 1 detachable ALU rear wall, approx. 400 mm high, anodized finish * Over the gooseneck, approx. 40 mm thick hardwood flooring, over the king pin with checker plate covering * 2-inch king pin * Mount at the rear of the gooseneck for ALU drive-on ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. length 8,800 mm, with rear bevel approx. 500 mm x 10° * Recess in platform and rear bevel for accommodating an excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st axle self-steering, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reversing lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg * Platform with continuous and between-axles interrupted 50 mm thick hardwood flooring (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanized side extensions by approx. 230 mm each side (without wooden planks) * Wheel wells with square climbing strips, approx. 15 x 15 mm in front of the axles, continuous opening up to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel wells with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) Kedpfotx Nwnjx Ag Esna * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with single-track monitoring of the axles, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. length 4,350 mm and width approx. 900 mm * Hydraulically folding ramp tips * Ramps hydraulically adjustable individually by approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber surface approx. 25 mm and steel surface approx. 5 mm as additional

Stanje: novo, največja dovoljena obremenitev: 36.400 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of immediately and short-term available vehicles can be found on our website. Excerpt from the equipment. Full specification available upon request. - Gooseneck in SNT design to optimize the platform length, approx. 3,700 mm long, rear with a chamfer of approx. 1,000 mm x 6° - For tractor units: 4 x 2 and 6 x 2 - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S, & 15-pin sockets - 3 kW electro-hydraulic power pack to control hydraulic functions, except for hydraulic winches. Without installation of supply connections on the tractor unit Knjdpfx Aeyhkquog Esa - Outer beams of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then every approx. 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) - One mounting hole at the rear upper section of the outer beams of the gooseneck for a bolted lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - 3 pairs of recessed lashing rings inside the outer beam of the gooseneck (LC 5,000 daN) - 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN) - 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) - The gooseneck and rear chamfer feature grating flooring with 5 mm steel reinforcement - 2-inch king pin - Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) - Spiral cable to supply the electro-hydraulic power pack and/or the electric winch (approx. 35 mm², approx. 3.5 m long) between trailer and tractor unit with plug (NATO-NATO) - On the gooseneck: 1 pair of detachable aluminum side walls, approx. 400 mm high, anodized finish LOAD PLATFORM: - Load area, approx. 9,600 mm long, with rear chamfer approx. 900 mm x 6° - Loading platform behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg - TPMS tire pressure monitoring system according to ECE R 141 - BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steered. 3rd axle with electro-magnetic reverse lock activated via reverse gear and manually - Technical axle load: 12,000 kg each - Air suspension with lift and lower valve - 235/75 R 17.5 3PMSF twin tires. Brand at our discretion, load index 143/141J (144/144F) - Mechanical landing legs with 2-speed gearbox and crank - Continuous grating flooring with approx. 5 mm steel underlay as additional reinforcement, designed for point loads: - on the lift bed - on the load platform - Painted sand coating on the cover plates of the gooseneck as well as transition areas between gooseneck and lift bed, lift bed and load platform, and between load platform and ramps - 1 spare wheel mounting bracket under the load platform, right side before the axles - Cutouts in the outer frame of the platform and lift bed for hooking in tension belts (LC 2,000 daN) - 11 pairs of recessed lashing rings in the outer frame of the platform, foldable outward (LC 10,000 daN): - 3 pairs in the outer frame of the lift bed - 8 pairs in the outer frame of the platform - 11 pairs of recessed lashing rings along the central girder (LC 5,000 daN): - 3 pairs in the lift bed - 8 pairs in the rear part of the platform - Control valves for the hydraulic ramps on the right side of the vehicle - 1 pair of foldable mechanical rear supports with one-hand operation HYDRAULIC LOADING RAMPS: - 1 pair of two-part AXS steel ramps, approx. 4,920 mm long, and a...

Stanje: rabljeno, največja dovoljena obremenitev: 15.400 kg, konfiguracija osi: 1 os, prva registracija: 06/2014, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, Oprema: ABS, WEB prikolica z eno osjo, nizka platforma, krmilna os, dvojne pnevmatike, SAF Vse na prvi pogled: · Prva registracija: 16.06.2014 · Barva: Rdeča (nevtralna) · Teža: 5 kg · Nosilnost: 15.400 kg · Pnevmatike: 245/70 R17,5 · Opomba: Na voljo takoj Posebna oprema: · WEB prikolica · 1 os · Nizka platforma · Krmilna os · Dvojne pnevmatike · SAF os · Pocinkana · 4 ključavnice za zadnja vrata · ALU letve · 13 parov pritrdilnih točk · ABS · EBS · 2 držala za rezervno kolo · Rezervno kolo · Jost podstavki · Orodjarna škatla · Pritrdilni sistem za ladijski prevoz · 2 vzvratni žarometa · Bobnasta zavora Serijska oprema: · Ventil za dvigovanje in spuščanje · Ojačana sprednja stena · Stopnice na zadnji strani · 2 klini · Odbojniki za rampe · Portalna vrata Dimenzije tovornega prostora: Dolžina: 13,60 m (spredaj približno 4,20 m / zadaj približno 9,40 m) Širina: 2,48 m Višina: 3,00 m (spredaj približno 2,63 m / zadaj približno 3,00 m) Višina nakladalne površine približno 0,96 m Pridržane spremembe, tipkarske napake in možnost predčasne prodaje. Prodajalec si pridržuje pravico do prekinitve prodaje. _____ Notranja številka za povpraševanje: TR26195 _____ STARENT Truck & Trailer GmbH Bruck 49, A - 4722 Peuerbach Kontaktne osebe za prodajo: G. inž. Wimmer Christoph (nemščina, angleščina, češčina, poljščina, italijanščina) p: tudi WhatsApp t: @: G. Mehmet Terzi (nemščina, turščina, angleščina, ruščina, ukrajinščina, bosnščina, srbščina) p: tudi WhatsApp t: -104 @: G. Elias Höfler (nemščina, angleščina, bolgarščina, bosnščina, srbščina) p: tudi WhatsApp t: -123 @: Knodpfxszf Ufce Ag Eea Govorimo 13 jezikov. Zagotovo tudi vaš. Kontaktirajte nas! Spletna stran: / Facebook: / Instagram: / Starent Truck & Trailer GmbH odkupuje vaša gospodarska vozila, kot so vlečne enote, prikolice, tovornjaki in kombiji. Michael Doblhofer (nemščina, angleščina) p: tudi WhatsApp t: -102 @: Bastian Wagner (nemščina, angleščina) p: WhatsApp t: -103 @:

Stanje: rabljeno, največja dovoljena obremenitev: 15.400 kg, konfiguracija osi: 1 os, prva registracija: 06/2014, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, Oprema: ABS, WEB prikolica z eno osjo, nizka platforma, krmilna os, dvojne pnevmatike, SAF Vse na prvi pogled: · Prva registracija: 16.06.2014 · Barva: Rdeča (nevtralna) · Teža: 5 kg · Nosilnost: 15.400 kg · Pnevmatike: 245/70 R17,5 · Opomba: Na voljo takoj Posebna oprema: · WEB prikolica · 1 os · Nizka platforma · Krmilna os · Dvojne pnevmatike · SAF os · Pocinkana · 4 ključavnice za zadnja vrata · ALU letve · 13 parov pritrdilnih točk · ABS · EBS · 2 držala za rezervno kolo · Rezervno kolo · Jost podstavki · Orodjarna škatla · Pritrdilni sistem za ladijski prevoz · 2 vzvratni žarometa · Bobnasta zavora Serijska oprema: · Ventil za dvigovanje in spuščanje · Ojačana sprednja stena · Stopnice na zadnji strani · 2 klini · Odbojniki za rampe · Portalna vrata Dimenzije tovornega prostora: Dolžina: 13,60 m (spredaj približno 4,20 m / zadaj približno 9,40 m) Širina: 2,48 m Višina: 3,00 m (spredaj približno 2,63 m / zadaj približno 3,00 m) Višina nakladalne površine približno 0,96 m Pridržane spremembe, tipkarske napake in možnost predčasne prodaje. Prodajalec si pridržuje pravico do prekinitve prodaje. Knsdpozf Ufpefx Ag Eea _____ Notranja številka za povpraševanje: TR26195 _____ STARENT Truck & Trailer GmbH Bruck 49, A - 4722 Peuerbach Kontaktne osebe za prodajo: G. inž. Wimmer Christoph (nemščina, angleščina, češčina, poljščina, italijanščina) p: tudi WhatsApp t: @: G. Mehmet Terzi (nemščina, turščina, angleščina, ruščina, ukrajinščina, bosnščina, srbščina) p: tudi WhatsApp t: -104 @: G. Elias Höfler (nemščina, angleščina, bolgarščina, bosnščina, srbščina) p: tudi WhatsApp t: -123 @: Govorimo 13 jezikov. Zagotovo tudi vaš. Kontaktirajte nas! Spletna stran: / Facebook: / Instagram: / Starent Truck & Trailer GmbH odkupuje vaša gospodarska vozila, kot so vlečne enote, prikolice, tovornjaki in kombiji. Michael Doblhofer (nemščina, angleščina) p: tudi WhatsApp t: -102 @: Bastian Wagner (nemščina, angleščina) p: WhatsApp t: -103 @:

Stanje: rabljeno, največja dovoljena obremenitev: 15.400 kg, konfiguracija osi: 1 os, prva registracija: 06/2014, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, Oprema: ABS, WEB Prikolica z eno osjo, nizkopodna, z možnostjo krmiljenja, z dvojnimi pnevmatikami, proizvajalec SAF Na prvi pogled: · Datum prve registracije: 16.06.2014 · Barva: Rdeča (nevtralna) · Teža: 5 kg · Nosilnost: 15.400 kg · Pnevmatike: 245/70 R17,5 · Opomba: Na voljo takoj Posebna oprema: · WEB prikolica · 1 os · Nizkopodna prikolica · Os s krmiljenjem · Dvojne pnevmatike · SAF os · Pocinkana · 4 ključavnice na zadnjih vratih · ALU letve · 13 parov pritrdilnih točk · ABS · EBS · 2 nosilca za rezervno kolo · Rezervno kolo · Jost podpore · Orodjarna · Sistem za pritrditev tovora (Ferry Lashing) · 2 zadnji luči za vožnjo vzvratno Kjdpfjzf Ufijx Ag Eona · Bobnasta zavora Serijska oprema: · Ventil za dvigovanje in spuščanje · Okrepljena sprednja stena · Stopnice na zadnji strani · 2 klini · Odbojniki na rampi · Vrata v obliki portala Dimenzije tovornega prostora: Dolžina: 13,60 m (spredaj približno 4,20 m / zadaj približno 9,40 m) Širina: 2,48 m Višina: 3,00 m (spredaj približno 2,63 m / zadaj približno 3,00 m) Višina tovornega prostora približno 0,96 m Pridržujemo si pravico do spremembe cen, napak in vmesne prodaje. Prodajalec si pridržuje pravico do odstopa od prodaje. _____ Interna številka za povpraševanja: TR26195 _____ STARENT Truck & Trailer GmbH, Bruck 49, A - 4722 Peuerbach Kontaktne osebe za prodajo: G. inž. Wimmer Christoph (nemščina, angleščina, češčina, poljščina, italijanščina) p: tudi WhatsApp t: @: G. Mehmet Terzi (nemščina, turščina, angleščina, ruščina, ukrajinščina, bosnščina, srbščina) p: tudi WhatsApp t: -104 @: G. Elias Höfler (nemščina, angleščina, bolgarščina, bosnščina, srbščina) p: tudi WhatsApp t: -123 @: Govorimo 13 jezikov. Zagotovo tudi vaš. Obrnite se na nas! Spletna stran: / Facebook: / Instagram: / Starent Truck & Trailer GmbH odkupuje vaša gospodarska vozila, kot so vlečne enote, prikolice, tovorna vozila in kombiji. Michael Doblhofer (nemščina, angleščina) p: tudi WhatsApp t: -102 @: Bastian Wagner (nemščina, angleščina) p: WhatsApp t: -103 @:

Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, skupna višina: 1.250 mm, Oprema: ABS, MAX Trailer Type 210 NEW | Hydraulic steering – extendable | 36t payload | 3 axles | from €76,900 New vehicle – can be individually configured for your application. High payload with robust construction and maximum cost-effectiveness. Highlights: - Extendable loading platform with pneumatic locking - Numerous heavy-duty lashing points for maximum load securing - Hydro-mechanically forced-steered BPW axles with disc brakes - Air suspension with lift and lower function - WABCO EBS brake system in compliance with EU regulations - Mechanical JOST landing legs with 2-speed gearbox - LED lighting system - Tyre pressure monitoring system (TPMS) Construction & Durability: - High-strength fine-grain steel construction - Metallised chassis with premium corrosion protection - Multilayer paintwork with additional cavity sealing - Heavy-duty wooden floor in robust Omega profiles Included Options: - Convenient rear steering via cable remote control - Electro-hydraulic power pack - Galvanised front wall (approx. 1,200 mm) - EN 12642-XL body - 10 pairs of stake pockets for flexible load securing - Spare wheel holder under the loading area - Beacon holder - Reflective tape & European reflector plates - Air couplings at front Additional equipment and individual adaptations available at any time – we configure your vehicle exactly to your requirements. Kedpfoypaz Sox Ag Ejna Sample photo. Equipment may vary depending on configuration.

Stanje: novo, največja dovoljena obremenitev: 34.500 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.540 mm, skupna višina: 350 mm, Oprema: ABS, MAX Trailer Type 510 NEW | Hydraulic Pendle Axle – extendable | 34t payload | 2 axles | from €136,900 New vehicle – can be customized to your specific field of application. High payload with robust construction for maximum cost-efficiency. ----Technical Highlights • Hydraulically liftable and lowerable gooseneck with approx. 23,000 kg fifth wheel load • SUPER LOW low bed trailer, extendable, with approx. 40 mm hardwood flooring • Hydraulically forced-steered pendle axles with axle equalization • Rear axle steering conveniently controlled via cable remote • Heavy-duty lashing points for professional cargo securing • Continuous excavator trough for versatile transport tasks ----Chassis & Safety • WABCO EBS brake system in accordance with EU regulations • Tire Pressure Monitoring System (TPMS) • 245/70 R17.5 tires • LED lighting system Short. Strong. Ready. ----Construction & Durability • High-strength fine-grain steel construction • Metallized vehicle chassis with premium corrosion protection • Multi-layer paint system for extended service life • Cavity sealing with special wax Kjdpfxsypa Ife Ag Eona ----Included Options • Galvanized front wall + spare wheel • Electro-hydraulic unit • Preparation for 20'/40' container transport • Load gauge incl. load diagram • Central lubrication system BEKAMAX • Extendable warning panels with LED • Beacon holder ----Other equipment and individual adaptations available at any time – we configure your vehicle exactly to your requirements. Sample photo. Equipment may vary according to configuration.

Stanje: novo, največja dovoljena obremenitev: 39.600 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, skupna višina: 860 mm, MAX Trailer Type 100 NEW | Extendable | 39t Payload | 3 Axles | from €66,900 New vehicle – individually configurable to suit your application. High payload capacity with rugged construction and maximum cost-efficiency. Kedpfeypa Npjx Ag Eona --- Highlights: • Approx. 39,600 kg payload • Loading platform 8,600 mm + 5,400 mm extendable • Ramp load capacity up to 40,000 kg • BPW axles with air suspension • WABCO EBS braking system --- Technical Data: • Gross vehicle weight: 49,500 kg • Unladen weight approx.: 9,866 kg • Loading height at max. load: approx. 860 mm • Overall width: 2,540 mm • Speed: 80 km/h --- Standard Equipment: • Extendable loading platform with durable hardwood floor • Galvanised steel ramps with hydraulic lifting mechanism • High-strength steel construction with long-lasting corrosion protection • LED lighting system • JOST landing legs with 2-speed gearbox • Tire Pressure Monitoring System (TPMS) --- Included Options: • Spare wheel with holder • Galvanised front wall (approx. 400 mm) • Electro-hydraulic power pack under loading platform • Extendable warning signs with LED • Reflective tape in accordance with EU regulations • Rotating beacon holder at rear • Ramp control valves on right side Additional equipment and individual adaptations available at any time – we configure your vehicle exactly according to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: novo, največja dovoljena obremenitev: 39.000 kg, skupna masa: 50.100 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, skupna višina: 860 mm, Oprema: ABS, MAX Trailer Type 110 NEW | Hydraulic steering – extendable | 39t payload | 3 axles | from €97,400 New vehicle, customizable to your specific operation requirements. High payload with robust design and maximum cost-efficiency. ----Highlights: • Extendable loading platform with durable 48 mm hardwood floor • Galvanized steel ramps with hydraulic lifting mechanism (up to 40,000 kg load capacity) • Hydro-mechanically forced-steered BPW axles with air suspension • Heavy-duty lashing points for professional load securing Knedpfx Ageypa Rgo Esa • WABCO EBS braking system according to EU regulations • LED lighting system • Mechanical JOST landing legs with 2-speed gearbox • Tire Pressure Monitoring System (TPMS) ----Body & Construction • High-tensile fine-grained steel construction • Metallized vehicle chassis for optimal corrosion protection • Multi-layer paint structure with additional cavity sealing • Checker plate above axles for increased durability Very important for trust. ----Included options • Galvanized front wall (approx. 400 mm) • Electro-hydraulic power pack • Convenient cable remote steering • Spare wheel with holder • Galvanized folding supports • Extendable warning panels with LED • Beacon bracket • Reflective tape according to EU regulations ----Further equipment and customizations available at any time – we configure your vehicle exactly to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: novo, največja dovoljena obremenitev: 37.500 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, skupna višina: 1.250 mm, Oprema: ABS, MAX Trailer Type 200 NEW | extendable | 37t payload | 3 axles | from €57,000 New vehicle – customizable to your specific application. High payload with sturdy construction and maximum cost-effectiveness. ----Highlights: • Extendable loading platform with pneumatic locking • Numerous heavy-duty lashing points for maximum load securing • BPW axles, air-suspended with disc brakes and lift/lower function • Self-tracking axles with electro-magnetic reverse lock • WABCO EBS brake system compliant with EU regulations • Robust steel construction with premium corrosion protection • LED lighting system • Mechanical JOST landing gear with 2-speed gearbox • Tire Pressure Monitoring System (TPMS) ----Construction & Design • High-strength fine-grained steel construction for long service life • Metallized chassis with additional cavity sealing • Multi-layer paint finish for optimum protection • Durable wooden floor mounted in sturdy omega profiles ----Included Options • Galvanized front wall (approx. 1,200 mm) Knjdpfxeypazxo Ag Eoa • Spare wheel holder under the loading platform • 10 pairs of stake pockets for flexible load securing • EN 12642-XL body • Reflective tape & European reflector plates • Brackets for warning signs incl. socket • Beacon brackets • Air couplings at the front ----Further equipment and individual customizations available at any time – we configure your vehicle exactly according to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: dober (rabljeno), prva registracija: 03/2016, skupna dolžina: 15.450 mm, skupna širina: 2.740 mm, skupna višina: 950 mm, medosna razdalja: 12.660 mm, barva: siv, Leto izdelave: 2016, Lastna teža: 18.900 kg Nosilnost: 78.100 kg Dovoljena skupna masa: 97.000 kg Višina nakladalne površine: 95 cm Raztegljiva nadstavba: Da Tehnično stanje: dobro Vizualno stanje: dobro FYMONVILLE MULTI-Z6L 6 OS SAF 5 HIDRAVLIČNO USMERJENE OSI RADIO DALJINSKI NADZOR VZMETENA NA ZRAK ELEKTRO-HIDRAVLIČNI PAKET VELIKOST PNEVMATIK 245/70 R17.5 RAZTEGLJIVA NAKLADALNA PLATFORMA VELIKOST 1100 CM + 370 CM – RAZTEGLJIVA, SKUPNA DOLŽINA NAKLADALNE PLATFORME 1470 CM ŠIRINA NAKLADALNE PLATFORME 274 CM + 2 X 25 CM – RAZTEGLJIVA NA STRANEH, SKUPNA ŠIRINA NAKLADALNE PLATFORME 320 CM VIŠINA NAKLADALNEGA ROBA 95 CM Ksdpfxjzpya Ts Ag Eena 2 HIDRAVLIČNI NAKLADALNI PLOŠČI PRIKLJUČKI ZA KAVELJ IN NOSILCI ZA PALETE LED VELIKA OMARICA ZA ORODJE CENTRALNO SISTEM ZA MAZANJE SLLEDITE NAM NA INSTAGRAMU: GEURTSTRUCKS GOVORIMO NEMŠČINO GOVORIMO ŠPANŠČINO GOVORIMO ANGLEŠČINO

Stanje: rabljeno, lastna masa: 8.700 kg, konfiguracija osi: 3 osi, prva registracija: 10/2016, Leto izdelave: 2016, Tara: 8700 kg. Vse naše razpoložljive modele vozil lahko najdete na naši spletni strani. Ali potrebujete financiranje? V večini evropskih držav ponujamo prilagojene rešitve financiranja, celovite storitve in telematiko. Z veseljem vam bomo pomagali. Knjdpfx Agszvr Nyj Eja