Denka Lift Priklopnik Z Delovno Ploščadjo nakup rabljenega (43.625)

Stanje: novo, največja dovoljena obremenitev: 35.510 kg, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, Celoten nabor naših vozil, ki so na voljo takoj ali v kratkem roku, najdete na naši spletni strani. Izvleček opreme. Celoten opis opreme na zahtevo. Podvozje: Ljdpfx Adszhd Ncogehi * Varjena konstrukcija iz visokokakovostnih jeklenih profilov s prebojnimi prečkami, zasnovana za visoko točkovno obremenitev. Spodnji nos za zaščito, širina približno 700 mm, zunanji okvir kot UNP-profil, drsna plošča približno 8 mm, višina na vratu spredaj približno 130 mm. Vlečna oprema: * 2-palčni kraljevski zatič (Kingpin) Zaščita pred spodvajanjem: * privijačena izvedba, v skladu z EU standardi Stranska zaščita: * po EU standardih, iz aluminijastih eloksiranih profilov Stojala: * 2 x 12 t podporne noge s kompenzacijsko nogo in enostranskim upravljanjem na FR desni Preme: * 3 x 9 t zračno vzmeteni agregati, proizvajalec SAF, kolutne zavore 22,5'' * Skupni hod približno 180 mm, dviganje in spuščanje s krožnim ventilom Zavorni sistem: * Dvocevni zračni zavorni sistem v skladu z EU, z EBS in RSS, samodejna regulacija v skladu z obremenitvijo, parkirna zavora preko vzmeti, varovani spojni nastavki trdno nameščeni na čelnem nosilcu, brez povezave z vlečnim vozilom Pnevmatike: * 6-krat, 385/55 R22,5 160J na jeklenih platiščih 11,75 x 22,5 ET 120, proizvajalec po naši izbiri * Nadzor tlaka v pnevmatikah (TPMS) prek CAN-bus sistema EBS Blatniki: * po EU standardih Nosilec rezervnega kolesa: * brez Zavarovanje tovora: * 9 parov zložljivih pritrdilnih obročev, enakomerno razporejenih, natezna sila približno 5,0 t * 9 parov zložljivih pritrdilnih obročev, enakomerno razporejenih, natezna sila približno 2,0 t * V zunanjem okviru na približno vsakih 400–600 mm odprtine za vpenjanje pritrdilnih trakov Prednja stena: * Ojačana jeklena konstrukcija, fiksna, približno 1.400 mm visoka * Notranje obložena s približno 9 mm vezano ploščo (približno 1.250 mm visoka) Tla: * približno 28 mm pod iz tropskega trdega lesa, nameščena v zunanji okvir z vroče pocinkanimi jeklenimi omega profili Razsvetljava: * po EU standardih, 24 V, večkomorni žarometi, LED stranske označevalne luči, LED pozicijske luči spredaj, LED obrisne luči zadaj, luč za registrsko tablico * LED sistem ohranjanja smeri vožnje * 1x15- in 2x7-polni priključki na čelnem nosilcu Oprema: * Opozorilne table ECE 70 * Nosilec za rotacijsko (opozorilno) luč, vključno z rotacijsko lučjo * Zadnja desna vzpenjalna lestev, zložljiva in izvlečna (brez podesta) * 1 odprta škatla iz perforirane pločevine, prečno nameščena, približno 600 x 450 x 2430 mm, pocinkana, za osemi Barvanje: * Prednja stena: RAL 5010 encijan modra * Podvozje: vroče pocinkano * Zunanji okvir: vroče pocinkan + RAL 5010 encijan modra * Srednje stebričke: RAL 5010 encijan modra * Stranska zaščita: eloksiran aluminij * Zaščita pred spodvajanjem: bela (RAL 9016 prometno bela) * Priključki: pocinkani/KTL črni * Platišča: srebrna Dodatna oprema: * Prva os dvižna, s popolnoma avtomatskim, od obremenitve odvisnim sistemom dvigovanja * 10 parov žepov za stebričke v zunanjem okviru, enakomerno razporejenih * 4 vrste žepov za stebričke čez tovorno površino * 20 kosov stebričkov iz pocinkanih cevi 80/50, skupna dolžina približno 1.200 mm * Znotraj prednje stene nosilec za 20 vstavnih stebričkov * 5 x 25-delne stranske in zadnje stranice iz eloksiranih aluminijastih votlih profilov, preklopne in odstranljive, odstranljivi stebrički * Magazin za stranice pod šasijo levo in desno * Vlečne tirnice za stranice * Zaklepi zabojnikov za 1 x 40' in 2 x 20' kontejner, v ravnini z

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Platform Trailer: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lifting and lowering device ----Drawbar / Flange Eye: * Drawbar height-adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (results in a B-dimension of approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reverse lights at the rear (activated by reverse gear) Lodjv D Tbkjpfx Adgjhi * 1 removable LED beacon (including bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning panel sets at front and rear * Support winch at front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm, one on each side left & right * Side underrun protection * Rear underrun protection * Plastic quarter fenders ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable for 3 m container external width) and lockable; locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN compliant) with a total external width of 3,000 mm ----Load Securing: * Perforated outer frame approx. 45° bent with 2 t lashing force every 480 mm * Installation of 3 t lashing brackets possible every 600 mm - 5 x 3 t UVV-lashing brackets mounted per side * In each front and rear corner 1 x 6.3 t lashing ring (front directly behind the container locks in the wooden floor and rear in the end crossmember) * Various drillings in front wall and end crossmember for 1.2 t lashing options ----Ramps: * 1 pair of aluminium slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tired and tracked vehicles * Storage compartment under the loading platform at the rear, integrated into the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air tanks, front support winch and flange towing eye painted in a shade of black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from CW 39/2026

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * Profil PT 30: ----Zavore: * EBS (električni zavorni sistem) * Naprava za izpustitev zavor v sili za vzmetne zavorne cilindre * Bobnaste zavore ----Osi: * 3 x 11 ton, osi Gigant ----Vzmetenje: * Zračno vzmetenje z dvigom in spuščanjem ter ventilom RtR ----Povezava vlečnega vozila: * Povezava vlečnega vozila dolžine 1.200 mm s 40 mm vtičnico in nastavitvijo višine s pomočjo vzmetne povezave in zapornice ----Elektrika / osvetlitev: * Pametna plošča, nameščena na prikolici kot informacijski prikazovalnik (za prikaz obremenitve osi - ločeno spredaj in zadaj) * Nadzor tlaka v pnevmatikah z možnostjo prikaza v vozilu prek signala EBS brez dodatne namestitve v vozilu * 15-polni vtič * LED osvetlitev 12 / 24 V * LED rotacijska svetilka (odstranljiva) zadaj ----Splošni dodatni deli: * Stranska zaščita pred trčenjem * Podpirala na zadnji strani okvirja * Mehansko nastavljivi paketi opozorilnih tablic spredaj in zadaj * Sprednji plastični blatniki * Zadnji ravni jekleni zaščitni paneli * Orodjarna škatla iz pocinkane jeklene pločevine, približno 650 x 300 x 600 mm, črna, barvana s praškom, na desni strani * Škatla v podvoju za dodatke s pokrovom, 2 varnostni ključavnici, trajno vgrajeni (neposredno za platformo podvoja) * 2 stopnici, pocinkani, na podvoju, levo in desno ----Površina nizkonadvozne prikolice: * Varjena protidrsna površina ROBOTER na jekleni plošči podvoja (izstopajoče varjene brazde) ----Varovanje tovora (paket za varovanje tovora, sestavljen iz): * 2 pritrdilne točke (13,4 tone) spredaj levo in desno na nosilcu čelne stene * 1 par UVV pritrdilnih obročev (13,4 tone) spredaj in zadaj ter na vsaki strani 3 pari UVV pritrdilnih obročev (10 ton), vrtljivi in spustljivi, obremenljivi v vse smeri in vgrajeni v zunanji okvir * Na vsaki strani 3 žepov za pritrditev z istočasno možnostjo pritrditve z 2 tonami * Profifix letve za pritrditev v vzdolžni osi na sredini, v ravni površini za možnost pritrditve do 3000 daN ----Širitev: * 6 parov mehanskih iztegnih rok za 3 metre skupne širine (vendar ne na zadnji strani) * Plošče za širitev, položene na sredino tovorne površine ----Rampe: * Hidravlične, enodelne rampe, približno 3.000 x 720 mm * Mehansko, stransko nastavljive * Blok za upravljanje s 4 izhodi za poznejšo nadgradnjo hidravličnega premika ramp ----Nosilec za bager: * Nosilec za bager, ki se razteza čez zadnjo os do končnega nosilca (skupna dolžina približno 2.100 mm) * 2 para pritrdilnih točk, 6400 daN, na nosilcu za bager, na strani v vzdolžnem okvirju ----Višina tovorne površine: * obremenjeno približno 910 mm +/- 20 mm, zračno vzmetenje Lsdpfx Aetplwiedgohi ----Barvanje: * Okvir, podvozje, iztegni roki, podpirala in rampe so vroče pocinkani * Osi, vrtilni obroč, zračni rezervoar, vlečna prikolica so pobarvani v črni barvi ----Informacije: * Novo vozilo z garancijo proizvajalca * Napake in medprodaja pod pridržkom ----Dobavni rok: * dostavljivo od približno 45. tedna 2026

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profi 30.0 ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical rear axle equalization ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via draw spring and turnbuckle ----Lighting / Electrics: * RDÜ tire pressure monitoring * Multi-voltage system * LED tail lights 12 / 24 V * Rear removable rotating beacon * 15-pin power connector ----General Attachments: Ledpfx Adjl Th I Aegshi * Lateral underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front: closed plastic mudguards; Rear: straight galvanized steel skirts, each with splash guards * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for tool box in the bogie platform * Four stake pockets per side (stakes not included), also suitable for lashing ----Load Securing (La-Si package consists of): * 2 lashing eyes (6.4 t) front left & right on main frame of the bogie platform * 6 pairs of UVV-certified lashing rings, foldable and lowerable, loadable in all directions, recessed into the outer frame * Corner load capacity 13.4 t, otherwise 10 t ----Widening: * 6 pairs of mechanical fold-out outriggers for max. overall width of 3 meters (except at the sloped rear) * Widening planks stored in the center of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically laterally adjustable * 4-way valve block for retrofit hydraulic lateral ramp shift ----Loading Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (including 860 mm drive-on slope) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, bogie, drawbar and drive-on ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black ----Info: * Permissible gross weight technically up to 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: Immediately available from Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 35.500 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2007, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.500 mm, skupna širina: 2.550 mm, skupna višina: 3.200 mm, Oprema: ABS, Extending trailer with total length adjusting from 7,700 to 21,300 mm; electric hydraulic pump; manual pump for hydraulic system; NATO external jump start socket; 3 central stanchion rail(s) on the loading surface; 10 stanchion pockets per side; 10 pairs of heavy-duty lashing rings recessed into the floor; all-round warning light/rear; JOST landing gears; ABS; EBS; axle(s); axles are hydraulically steered; drum brake system; air suspension with lift-lowering device; central lubrication system; vehicle may be decorated or labeled with advertising. Ljdsyumi Hspfx Adgehi SI86629 Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will gladly make you an offer through our partner workshops! The vehicle may be decorated or labeled with advertising. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing quote for this item. Please contact us!

Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full specifications available upon request. * Gooseneck, approx. 4,100 mm long with central beam * Platform deck, extendable twice, approx. 9,400 mm in length * BPW axles and suspension * All axles hydro-mechanically forced steered * Technical axle load: 12,000 kg * Air suspension with lifting and lowering valve * Tires: 235/75 R 17.5 3PMSF dual mounted * WABCO brake system, EBS-E * 3 kW electro-hydraulic power unit for hydraulic operations, without installation of supply connections at the tractor unit * 4 pairs of stake pockets recessed into the outer frame of the gooseneck, for insertable stakes approx. 100 x 50 mm * 2-inch king pin * 8 pairs of stake pockets recessed into the outer frame of the platform deck, for insertable stakes approx. 100 x 50 mm * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the deck on the left in the direction of travel * Remote steering from the front and rear via cable remote control with push buttons; with single-track axle monitoring; no installation in the tractor unit * 2 axle load gauges mounted on the left side * Steel front wall, approx. 1,600 mm high * 3 transverse stake pocket strips in the platform deck, for insertable stakes approx. 100 x 50 mm * 1 transverse stake pocket strip in the gooseneck deck, for insertable stakes approx. 100 x 50 mm * 1 additional lockable INOX toolbox under the platform deck * WADER container pockets in the platform deck for transporting: 2x 20' containers or 1x 40' container Ljdpfxewvzg Rj Adgohi * Central lubrication system with 2 pumps, brand BEKAMAX * Complete HRM metallization (High Resistance Metallisation)

Stanje: rabljeno, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2013, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.520 mm, Oprema: ABS, Schmitz Cargobull S01 platforma z dvižno osjo, aluminijaste stranske stranice, nosilci PREVOZ JEKLA Int. št. za povpraševanja: 0326236 * ABS * EBS * 3 osi z zračno vzmetenjem * Dvižna os * Kolutne zavore * BPW osi Lsdpfx Aeyulw Nedgohi * Aluminijaste stranske stranice * Nosilci / stebrički Dolžina tovornega prostora: Dolžina: 13.600 mm Širina: 2.520 mm Pnevmatike: 1. os: 385 / 65 R 19,5 20 % zračno vzmetenje / dvižna os 2. os: 385 / 65 R 19,5 20 % zračno vzmetenje 3. os: 385 / 65 R 19,5 20 % zračno vzmetenje ----Cena: 9.900,- EUR + 19 % DDV Za dodatna vprašanja nas lahko kontaktirate na naslednjih telefonskih številkah: * Govorimo: nemško, angleško, francosko, poljsko in ???? Pridržujemo si pravico do napak, sprememb in vmesne prodaje.

Stanje: rabljeno, največja dovoljena obremenitev: 29.100 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2005, dolžina tovornega prostora: 13.520 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 800 mm, skupna širina: 2.550 mm, Leto izdelave: 2005, Oprema: ABS, 3-Axle Dinkel Dropside Semi-Trailer VIN: D17042 Chassis / Attachments: * Air suspension // Raise and lower function * 3rd axle forced steering * Jost landing legs * 3 x Daimler-Benz axles with disc brakes * Tyres: 445/40 R22.5 * Tyre tread depth remaining: axles 1+2 approx. 60%, axle 3 approx. 70% * 2 x PVC tool boxes * Forklift mount * 4 x extension boards Lhjdpfx Adoy N Hvwegji Body: * Dropside semi-trailer * Forklift mount Weights: * Gross weight: 36,000 kg * Unladen weight: 6,900 kg * Payload: 29,100 kg Other: * German semi-trailer ---- New general inspections / safety checks or weight downgrades/upgrades available on request. We are happy to assist you in obtaining export/transit licence plates, and can also arrange delivery of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English, and Russian!---- No liability for typographical & printing errors, subject to change, prior sale, and errors!----Who are we? Leible Nutzfahrzeuge is a family-run business based in Kehl am Rhein. With many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in trading new and used commercial vehicles. On 11,000 sqm you will find a wide range of vehicles. Our company philosophy is characterised by fairness and reliability. Because customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person to assist with the purchase or sale of vehicles. See for yourself! Our services for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Arranging special transports We are happy to assist you in organising special transports. Transit / export licence plates We are happy to assist you in obtaining export/transit licence plates.

Stanje: novo, največja dovoljena obremenitev: 14.910 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.550 mm, Oprema: ABS, Celotno zalogo vozil z vozili, ki so na voljo takoj ali v kratkem roku, najdete na naši spletni strani. Izvleček opreme. Popolna oprema na zahtevo. Ogrodje: * Zvarjena konstrukcija iz visoko kakovostnega jekla s prečnimi nosilci in zunanjim okvirom Polica za rampe: * Polica za rampe med vzdolžnimi nosilci Zaščita podvozja: * Fiksna zaščita podvozja v skladu z direktivo ECE R58-03 * Stranska zaščita in zaščita podvozja skladno s predpisi EU Sprednje podpore: * Sprednja podpora z dvostopenjskimi ročnimi nogami (2 x 12 t) Zadnje podpore: * Zadnja podpora z blokirnimi padajočimi nogami Premi: * 2 x 10 t SAF-premi s bobnastimi zavorami, nizko vzdrževalna zračna prem, dvižni in spuščalni mehanizem s skupnim dvigom približno 180 mm, zavorne obloge brez azbesta. Prem z nosilnostjo 10.000 kg * Jekleni tlačni zračni rezervoar * Kolesa centrirana po sredini Pnevmatike: * Pnevmatike 235/75 R 17,5, na jeklenih platiščih, 8-krat, proizvajalec po naši izbiri * Nadzor tlaka v pnevmatikah, ki javi prenizek tlak v pnevmatikah Zaščita pred brizganjem: * Plastični blatniki, zaščita proti blatu Ledpfozgqncox Adgehi Privez tovora: * 6 parov pritrdišč, razporejenih po 8 t enakomerno na zunanjem okvirju * Poševno in perforirano zunanjo ogrodje za obešanje kavljev pri zaprti bočni steni * Žepki za kole: 3 pari vvarjenih žepkov za kole, notranja mera za kole približno 80 x 50 mm, razporeditev enakomerna Zavorni sistem: * Samodejni, obremenitveno odvisni, dvovodni pnevmatski zavorni sistem skladno z EU predpisi s federsko parkirno zavoro (vključno z enim razbremenilnim ventilom), EBS priključki za zrak rdeče/rumene spiralne cevi za prikolico Talna površina: * Trdolesna tla približno 30 mm z Z-profil deskami Sprednja stena: * Kot odstranljiva stranica, približno 600 mm visoka Svetlobna/električna oprema: * Elektrika: 24-voltna svetlobna oprema v skladu s StVZO * Večkomorni zadnji LED-lučniki s vgrajeno elektroniko in utripajočimi stranskimi označevalnimi lučmi * Dodatno pri prikolici luč za ohranjanje sledi * Sprednje spodnje pozicijske luči, bele (pri odobritvi v državah EU in CH obvezne) Elektrika: * Priključki prikolice 2x7-polni * Priključek prikolice 1x15-polni * Nosilna plošča za dovodne cevi na prečni sprednji nosilec, cevi trdno nameščene, brez ločenih priključkov, dovodne priključke levo Pribor: * Priporne zagozde v skladu s StVZO * Priključna okrogla luč zadaj * Dobava dodatne 40 mm vlečne naprave (GG maks. 13.500 kg) Premaz: * Podvozje cinkano in prašno lakirano * Okvir podvozja s kakovostno vročo cinkano zaščito in naknadnim prašnim premazom za optimalno zaščito proti koroziji, površina lahko kaže brazdasto strukturo zaradi vročega cinkanja * Standardni premaz za nadgradne dele Barva: * RAL 3002 karmin rdeča * Sredinski in kotni stebrički: KTL + prah, RAL 3002 karmin rdeča * Stranice: RAL 3002 karmin rdeča * Vlečna cev: vroče cinkano * Opozarjamo, da lahko zaradi velikosti podvozja in izbranega postopka premazovanja (vroče cinkanje) pride do nepravilnosti na površini. To lahko vključuje cinkove kapljice, viseče kaplje, cinkove sledi, ukrivljenost ipd. Na to nimamo vpliva in to kasneje ne predstavlja pravne napake v izgledu. Označevanje kontur: * Stranski odsevni kontur trak – rumen * Zadnji obkrožajoč odsevni trak – rumen Dodatna oprema: * Zadnji izvlek približno 800 mm s fiksno zaščito podvozja na kolesih

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for maneuvering purposes switched to the first axle via EBS (no installation required on the truck side) * Rear axle as self-steering axle with electro-pneumatic steering lock * Locking of the self-steering axle from the driver's cab for maneuvering purposes, controlled via EBS (no installation required on the truck side) ----Suspension: * Air suspension with lifting/lowering device and Ride-to-Return valve ----Electrics / Lighting: * Smart Board mounted on the trailer as an information tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12/24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at rear for extended length lighting * Side marker lights with indicator signal control * Tyre pressure monitoring system with display option in the truck via EBS signal (no installation required on the truck side) Ledpeq Euakefx Adgohi ----General equipment: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swing arm as carrier for connecting cables from truck to semi-trailer ----Low loader deck: * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and front tool box made of galvanized powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high aluminium side boards (in RAL colour of choice) on the sides of the fifth wheel platform, foldable and removable * Rear wall -150 mm- high plug-in * Rear slope on fifth wheel platform to low bed approx. 700 mm long with tread plate covering and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and low bed platform with 60 mm clamped wooden planks * Tear plate above the axles * 9 x mechanical folding extensions to 3 m overall width, but not in the rear slope (extension planks available with closed storage compartment across the direction of travel under the loading floor) * 3 mounting shafts under the fifth wheel platform for storage of optional aluminium loading ramps or wooden planks for wheel well coverings ----Load securing (LaSi package): Fifth wheel platform: * Perforated outer frame angled at 45° with hole pattern for lashing points (2 t lashing capacity per point at a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings each side recessed in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the drop, 1 x above the centre axle next to the longitudinal beam) Low loader platform: * 3 x 13.4 t lashing rings each side on the outer frame (1 x beginning of the drop on the fifth wheel platform, 1 x beginning of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings each side (1 x between front wheel well and 1st axle, 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings each side bolted to the outer frame of the wheel wells (2 on the front wheel well, 1 on the rear wheel well) ----Excavator arm recess: * Extended excavator arm recess from end of last fixed axle through to steering axle up to rear crossmember, continuous with

Stanje: novo, največja dovoljena obremenitev: 31.630 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T 4: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * Warning plate sets front & rear * Contour tape on sides and rear, reflective * EBS multi-voltage system for 12 & 24 V electrical systems * Removable LED beacon rear * 24 V - 15-pin and additional 12 V - 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye, continuously height-adjustable * Powder-coated steel toolbox and spare wheel holder, basket design, right side * Front closed single plastic mudguards * Rear straight steel mudflaps, each with spray suppression (anti-spray) * Side underrun protection * Extended offset bend by 500 mm to the front * Turntable platform extension at the front by 520 mm with 45° corners and 3 integrated lockable storage compartments with covers * Chassis made from high-strength fine-grained steel * Decking above turntable platform from 50 mm softwood and on low loader platform from 60 mm softwood * Outer planks of loading ramps made from 50 mm bamboo wood * Four stake pockets per side (but no stakes included), each with a 2 t lashing point * Load securing package comprising: 2 lashing eyes (6.4 t) front left and right on the main frame of the turntable platform; front and rear, one pair of lashing rings (13.4 t) each on outer frame; four pairs of swivel and lowerable lashing rings (10 t) per side, loadable in all directions and integrated in the outer frame; two pairs of lashing rings (6.4 t) per side in excavator stick recess; eight pairs of galvanized folding outriggers for 3 m total width (not on the rear slope) * Widening planks stored on the left side in stowage compartment * Excavator stick recess above rear axle up to end of approach slope, approx. 2,300 x 740 x 190 mm * Mechanical drop supports rear * Hydraulic, hot-dip galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp movement on slide pipe from ramp shaft * Loading area above fifth wheel: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded deck height approx. 860 mm (including 860 mm approach slope) * Chassis, turntable, loading ramps and mechanical folding supports rear hot-dip galvanized * Axles, springs, air tanks and turntable painted in black * New vehicle with manufacturer's warranty Lhedpfx Adorczm Djgei * Subject to errors and prior sale * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 14.550 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2024, ETÜ-TA-R 19.0 ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar / Towing Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Electrics / Lighting: * TPMS (tyre pressure monitoring system) * 15-pin power connector * LED tail lights ----General Attachments: * Jost landing gear at the front * Outward folding rear supports * Tool box made of galvanized steel sheet, approx. 650 x 350 x 320 mm, mounted on the right side (powder-coated black) * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Reinforcement package for drill rig transport on the chassis – loading height +20 mm * 50 mm softwood floor, clamped design * Preparation in front of the front wall for subsequent installation of container locks * Bolted smooth steel front wall * Fold-down trapezoidal-profile steel side walls with board-lift assist * Steel rear wall, slidable between ramps – storage bracket for unused position inside, in front of the headboard Ledpfepk D D Hex Adgehi * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * Front and rear corners each fitted with 1 x 10 t lashing ring; multiple holes for 1.2 t lashing options in front and rear crossmembers ----Ramps: * One-piece, mechanical grate ramps with spring system for single-person operation, approx. 2,750 x 620 mm (retractable to 20 mm gap) * Rear access angle approx. 860 mm ----Tyres: * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, tailgate, rear folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks and landing gear painted in a shade of black * Sideboard painting in RAL 9010 pure white * Painting of side walls in an individual RAL color available at extra charge ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved ----Delivery time: * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 11.9: ----Zavore: * Zavorna sistema EBS * Naprava za izpust zavor v primeru izrednih razmer za cilindr z vzmetjo * Bobnaste zavore ----Osi: * 2 x 5,5 t BPW osi ----Vzmetenje: * Parabolične vzmeti z izravnalnim mehanizmom ----Vlečna priprava / priključna plošča: * Vlečna priprava, nastavljiva po višini za 300 mm * 40-milimetrska priključna plošča ----Splošni dodatni deli: * Sprednja opora Jost * Zunanje, vroče pocinkane, zložljive opore zadaj * Plastični blatniki * Plastična orodjarna škatla spredaj desno na čelni steni ----Elektrika / osvetlitev: * Sistem za nadzor tlaka v pnevmatikah (RDÜ) * LED-osvetlitev ----Nosilna površina: * Nosilna površina 6,27 m * Primerna za transport kontejnerjev * 50-milimetrski pod iz iglastih plošč * Pred čelno steno je nameščen priključek za poznejšo montažo zaklepov za kontejnerje * Vijolična čelna stena iz gladkih pločevin * Stranske stene iz jeklenih pločevin, trapezno profilirane, z možnostjo zlaganja z vzmetmi za podpiranje * Jeklena zadnja stena, ki se lahko potisne med držala za nakladalno ploščad, ko ni v uporabi, je nameščena notri pred čelno steno * Zadnji nosilci, vijeni ----Pripomočki za pritrditev tovora: * Zunanji okvir z luknjami, oblikovan pod kotom približno 45 stopinj, s silo vlečenja 2 t na vsakih 480 mm * Možna je vgradnja 3-tonskih kljuke za pritrditev tovora na vsakih 600 mm * V kotih spredaj in zadaj po 1 x 6,3-tonska kljuka za pritrditev tovora * Na čelni in končni nosilni nosilci različne luknje za pritrditev tovora s silo 1,2 t ----Nakladalne rampe: * Enodelne, mehanične nakladalne rampe z vzmetmi za delovanje z eno osebo, približno 2.750 x 600 mm (lahko se združijo do 20 mm) * Nakladalni nagib zadaj približno 860 mm ----Pnevmatike: Lodpfx Adoq Ra D Esgshi * Pnevmatike: 235/75R17.5 ----Medosna razdalja: * Medosna razdalja: 990 mm ----Barvanje: * Vroče pocinkano podvozje, vlečna priprava, čelna stena, zadnja stena, zadnji nosilci in nakladalne rampe * Barvanje stranskih sten v barvi RAL 9010, čista bela * Barvanje stranskih sten v drugi barvi RAL je mogoče, vendar za doplačilo ----Informacije: * Pridržujemo si pravico do sprememb in napak * Novo vozilo z garancijo proizvajalca ----Dobavni rok: * Na voljo takoj iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 15.970 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, ETÜ-TA-R 21,0: ----Zavore: * Wabco EBS-E (električni zavorni sistem) * Naprava za izklop v sili za vzmetne akumulatorje * Bobnaste zavore ----Osi: * 2 x 11 ton osi Gigant ----Vzmetenje: * Zračno vzmetenje z dvigalom ----Povezovalna palica / prirobnična povezovalna palica: * Povezovalna palica s 50 mm prirobnično povezovalno palico in povezovalna palica z nastavljivo višino ----Osvetlitev / električna napeljava: * 15-polni vtič * LED-luči 12/24 V * Sistem za nadzor tlaka v pnevmatikah (RDÜ) ----Splošni dodatni deli: * Jost podpiralno kolo spredaj * zunanja zložljiva podpirala zadaj * plastična orodjarna škatla, pribl. 750 x 350 x 300 mm, na desni strani * stranska zaščita pred trčenjem * plastični četrtni odbijač ----Površina za nizko tovorno platformo: * pred čelno steno in zadnjo poševnino, nosilec za naknadno namestitev zaklepnih mehanizmov za transport 20-palčnih kontejnerjev * Izvedba 21 ton skupne mase s predelanim okvirjem in predelanim osi * Paket za ojačitev za transport vrtalnih naprav na šasiji * 50 mm talna obloga iz iglavcev v vpeti izvedbi * pred čelno steno nosilec za naknadno namestitev zaklepnih mehanizmov * vijična čelna stena iz gladke pločevine * deljene stranske stene iz jeklene pločevine - trapezno profilirane - z zložljivim ogrodjem na sredini * jeklena zadnja stena, ki se lahko potisne med rampe - pritrdilni elementi, kadar se ne uporablja, v notranjosti pred čelno steno * zadnje nosilce, vijično pritrjene ----Pripomočki za pritrditev tovorja: * z luknjami perforiran zunanji okvir, pribl. 45 stopinj, s 2 tonami vlečne sile vsakih 480 mm * vgradnja 3-tonskih pritrdilnih zank je možna vsakih 600 mm * Profifix pritrdilna letev v vzdolžni smeri na sredini za pritrditev do 3000 daN * v kotih spredaj in zadaj po 1 x 10 ton pritrdilne zanke * Paket Lasi z 2 x 8 tonami potopljenih pritrdilnih zank na vsaki strani v zunanjem okvirju, različne luknje v čelni in zaključni nosilni palici za pritrditev z 1,2 tonami ----Rampe: * enodelne mehanične rešetaste rampe z vzmetmi za delovanje ene osebe, pribl. 3.000 x 620 mm (lahko se potisnejo skupaj do 20 mm) * zadnja poševnica pribl. 860 mm na šasiji ----Višina nakladanja: * brez tovora pribl. 940 mm * s tovorom pribl. 910 mm ----Medosjna razdalja / pnevmatike: * 1.810 mm Lhodpfxjl Tihxs Adgoi * Pnevmatike: 235/75R17.5 ----Barvanje: * Barvanje stranskih sten v barvi RAL - 9010 čista bela * Povezovalna palica, čelna stena, zadnja vrata, zložljiva podpirala in rampe, prevlečene z vročim pocinkom * Osi, vzmeti, zračni rezervoar in podpiralno kolo, pobarvane v črno barvo ----Informacije: * Novo vozilo z garancijo proizvajalca * Pridržana pravica do sprememb in napak * Ilustrativne slike ----Čas dostave: * takoj na voljo v Egestorfu

Stanje: novo, največja dovoljena obremenitev: 14.660 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, ETÜ-TA-R 19.0: ----Braking system: * Wabco EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: 2 x 10 t BPW Eco axles ----Suspension: * Parabolic springs - 110 mm wide - with tandem compensation unit ----Drawbar / Flange drawbar eye: Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Electrics / Lighting: * 15-pin electrical connector * LED tail lights * RDÜ tyre pressure monitoring system ----General fittings: * Jost landing gear at the front * Outboard folding supports at the rear * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood flooring * Preparation in front of the headboard for retrofitting container locks * Bolted headboard made of smooth sheet metal * Drop sides made of trapezoidal profile steel sheeting, foldable with tailboard spring assist * Steel rear wall insertable between ramps - holder for storage when not in use in front of headboard * Bolted rear stakes ----Load securing: * Perforated outer frame, approx. 45-degree angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * One 10 t lashing ring in each front and rear corner, various drill holes in the front and rear cross-members for 1.2 t lashing options * Profifix lashing rail along the longitudinal axis centre for lashing up to LC 3000 daN ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm ----Paintwork: * Chassis, drawbar, headboard, rear wall, loading ramps, and folding supports hot-dip galvanized * Drop sides painted in RAL 9010 pure white * Painting of the side walls in a RAL colour available at extra cost * Axles, springs, air tanks, flange drawbar eyes and landing gear painted in a shade of black ----Information: * New vehicle with full manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex-works Egestorf on the A7 Lodpfjl Th Hwex Adgehi

Stanje: novo, največja dovoljena obremenitev: 14.400 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-ER 19.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering device ----Drawbar / Flange Towing Eye: * Drawbar with 50 mm flange towing eye, height-adjustable by 110 mm via offset plate ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * LED tail lights 12/24 Volt ----General Attachments: * Jost landing leg at the front * External folding support legs at the rear Lhjdsmi Tmaopfx Adgji * Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side * Side underrun protection * Plastic quarter mudguards ----Low-loader Platform: * Reinforcement package on chassis for drilling rig transport * 50 mm softwood floor, clamped type * Preparation in front of front wall for retrofitting container locks * Bolted smooth plate front wall * Split steel side walls – trapezoidal profile – foldable with central folding stanchion * Steel rear wall slide-in between ramps – bracket for storage in front wall when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45-degree angled, with 2 t lashing force every 480 mm * Option for installation of 3 t drop lashing rings every 600 mm * Lashing package: 1 x 10 t UVV lashing ring in each front and rear corner, 2 x 8 t UVV retractable lashing rings each side in the outer frame, various holes for 1.2 t lashing options in the front and rear crossmembers ----Ramps: * One-piece slide-in ramps 12 t/pair, ramps approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm ----Loading Height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ----Tyres / Wheelbase: * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, rear flap, folding supports and access ramps hot-dip galvanized * ---Axles, air tanks, flange towing eye and landing leg painted in a shade of black--- * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 949 kg, skupna masa: 1.300 kg, konfiguracija osi: 1 os, prva registracija: 02/2026, dolžina tovornega prostora: 4.010 mm, širina tovornega prostora: 188 mm, višina nakladalnega prostora: 110 mm, skupna širina: 2.450 mm, skupna višina: 860 mm, A13 GW2616429 Večnamenski transporter 4018, proizvajalec TEMARED, tip DMC, . , Skupna masa: 1300 kg, 400x184 cm, z inercialno zavoro, 100 km/h (opcija), z zložljivo nakladalno rampo (opcija), nizkopodna prikolica, z možnostjo spuščanja podvozja Lhjdpsym Igdsfx Adgoi Višina nakladanja: 400 mm Pridržujemo si pravico do napak in predhodne prodaje.

Stanje: novo, največja dovoljena obremenitev: 19.470 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 930 mm, Leto izdelave: 2026, Oprema: ABS, now available for immediate delivery!!!!! JUMBO FLATBED TRAILER KRONE 3-axle ADP 27/ zLNT4 BS / MULTILOCK/8600 mm/BPW Brand/Manufacturer: KRONE First registration: NEW VEHICLE Dimensions: 8600 x 2480 x 930 mm Gross vehicle weight: 24,000 kg Unladen weight: 4,420 kg Payload: 19,580 kg Air suspension lift/lower Drum brakes Spare wheel holder ABS EBS Axle make: BPW ECO Anti-slip phenolic plywood floor Lashing rings Tool box Body paint: black Chassis paint: black Tyre configuration: 12-fold Tyre condition: 100% Front axle tyres: 235/75 R 17.5 Rear axle tyres: 235/75 R 17.5 MULTILOCK OUTER FRAME along the entire length BPW eco drum brakes 3 x 9,000 kg axles Extendable drawbar 2,000 – 2,400 mm Front and rear air suspension (raise/lower) Technical max possible gross vehicle weight: 27,000 kg ABS/EBS system 30 mm phenolic plywood floor Forklift loadable up to 5,460 kg axle load Steel front wall 1,200 mm high Wheelbase: 8,545 mm / Axle spacing between 2 & 3: 1,310 mm Overall length: 10,390 mm 880 mm lowered All information without guarantee, subject to prior sale!! If you have any questions about this or other vehicles, please call us. Lodpfxsy U R T Ro Adgehi If you have any questions about this or another trailer/car, please call us.

Stanje: rabljeno, največja dovoljena obremenitev: 29.000 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2008, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 500 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2008, Oprema: ABS, * Manufacturer: Wilken * Trideck forced steering, 3rd axle * Lift axle * Mounting bracket for truck-mounted forklift * 500 mm aluminum side walls * SAF axles Lhsdswaph Repfx Adgji * Full air suspension * Disc brakes

Stanje: rabljeno, največja dovoljena obremenitev: 12.100 kg, skupna masa: 16.000 kg, konfiguracija osi: 2 osi, prva registracija: 01/2011, dolžina tovornega prostora: 7.400 mm, širina tovornega prostora: 2.500 mm, Oprema: ABS, * ABS Ljdpfevy Nw Tsx Adgehi * Rotating beacon, orange * Duomatic air coupling * 5-chamber rear lights * Front landing gear * BPW ECO axles ----Body: Open platform (loading height approx. 950 mm), hardwood floor, rear extendable by 1,685 mm, 4 pairs of extendable container locks (twist locks), stainless steel toolboxes. Sale exclusively to business customers. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE, INCLUDING EQUIPMENT & ACCESSORIES. Our General Terms and Conditions (see Legal Notice) form the basis of all purchase agreements, invoices, pro forma invoices, orders, and sales discussions.

Stanje: rabljeno, največja dovoljena obremenitev: 24.000 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2008, Welcome to Johanning's Commercial Vehicles, your specialist for nearly new and exclusive used vehicles. Available immediately! Delivery & financing available. Location: 39606 Osterburg • Manufacturer: Wilken Oldenburg • Semi-trailer • 3 axles • New MOT (TÜV) valid until December 2025 • Tyres approx. 70% • 3rd axle steering and lifting • Tail lifts Johanning’s Commercial Vehicles – your partner for exclusive and low-mileage used vehicles. Our services – your benefits: (after sale) - Trade-in of your vehicle possible (any condition) - Immediate deregistration of your vehicle free of charge Lhsdovmlbnopfx Adgoi - Registration service for €150 (incl. fees and license plates) - Short-term registration option - Viewing and test drives possible at any time by prior telephone arrangement - Delivery to your door available by arrangement Errors and prior sale excepted.

Stanje: rabljeno, največja dovoljena obremenitev: 29.200 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2007, dolžina tovornega prostora: 13.470 mm, širina tovornega prostora: 2.470 mm, Oprema: ABS, Foedisch FOEAPL13.6 Platform Payload: 29,200 kg Lhsdpsu Ddldefx Adgei Tyres: 385/65 R 22.5 Lifting axle: 1st axle Trailer length: 13,800 mm Loading area (L x W): 13,470 x 2,470 mm Loading height: approx. 1,400 mm

Stanje: rabljeno, prva registracija: 03/2002, naslednji pregled (TÜV): 03/2027, Oprema: ABS, Samo za izvoz Prodaja samo v tujino SPR 324 Kotschenreuther 3 osi Lodpfey Dmq Dsx Adgshi

Stanje: novo, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 12.300 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Wiese 2-Axle Step Frame Platform Semi-Trailer with Fassi F545 Crane Mega Lowliner Chassis Lhodpfxon Hrtgj Adgei Welded construction with cross members, manufactured entirely from high-grade steel Neck height: approx. 220 mm including coupling plate Equipped with all necessary chassis reinforcements and cross connections Axles 2 BPW axles, each with 10,000 kg load capacity, fitted with 17.5" drum brakes ABS: 1 axle monitored Axle spacing: 1,810 mm Tyres 8 units, type 235/75 R17.5 Rims Aluminium rims, 10-hole, hub-centric, offset = 122 mm Lighting System 24V lighting system in accordance with EU Directive 76/756/EEC and subsequent amendments, featuring: 2x2 three-chamber LED tail lights 1x LED reversing light 1x LED fog light LED side marker lights Lane departure lights Number plate illumination 2x 7-pin sockets + 1x 15-pin socket wired as per EU standard Floor Galvanised grating floor in the low-bed area Steel chequer plate in axle area Load Securing Outer frame with D030 mm lashing hole profile on the bevel 2x12 lashing points, 8,000 daN in the outer frame 3 rows of combo stake pockets for 80x80 mm insert stakes in the low-bed area Accessories 2x wheel chocks with holder Spare wheel carrier winch 2x toolboxes with slide-out drawer (for chain storage) Surface Protection Steel structure: blasted and primed Paint Finish Chassis/frame/floor frame: single colour in RAL 3020 (traffic red) Axle hubs: single colour in RAL 3020 (traffic red) Axles: KTL-coated black Rims: Aluminium Durabright With Fassi F 545 RA.2.28 XE-Dynamic Hydraulic outriggers Additional stabiliser beams 360° working range Approx. 90% lifting capacity towards the front For further information please do not hesitate to contact us.

Stanje: novo, največja dovoljena obremenitev: 36.565 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.550 mm, skupna širina: 2.550 mm, skupna višina: 1.040 mm, Leto izdelave: 2026, Oprema: ABS, Brand-new Kässbohrer SPS Mega Heavy-Duty Platform Semi-Trailer – Immediately Available! Technical Data: * Fifth-wheel height: 950 mm * Platform length: 13,550 mm * Gooseneck: 120 mm * Platform height: 1,040 mm * Wheelbase: 7,700 mm * Axle spacing: 1,360 mm * Overall width: 2,550 mm * Gross vehicle weight rating [80 km/h]: 45,000 kg * Gross vehicle weight rating [60 km/h]: 46,000 kg * Unladen weight: 7,827 kg Chassis: * BPW axles with air suspension and disc brakes * Air suspension with load gauge * 1st axle liftable Lhjdpfxerukt Rs Adgei * Wabco braking system * Tyres: 445/45 R 19.5 Frame: * Chassis manufactured from high-grade S700 MC steel, compliant with ISO 1726 * 30 mm hardwood floor with 2 mm Omega-profile reinforcement * 8x2 units of side extensions, adjustable up to 300 mm * Landing gear at the front, foldable supports at the rear Ramp: * Ramp mounts at the rear of the vehicle * Rear ramp storage box Load securing: * Lashing rings * Stake pockets * 6 x 2 pcs. container lock pockets (suitable for 1x20 ft, 2x20 ft, 1x40 ft containers) + 2 x 2 pcs. container locks * Steel front wall, 1,500 mm high, with Code XL certificate Accessories: * 1x stainless steel toolbox * Stake storage box Chassis colour: RAL 3020 Traffic Red For further information, please do not hesitate to contact us.