Müller-Mitteltal T 4 Kompakt 40 nakup rabljenega (64.952)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Mali oglas
Alsdorf
835 km
Prikolica z nizko platformo
MÜLLER-MITTELTALETÜTAR 14,4 Plateau, LED, Runduml.
Pokliči
Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem Low Loader ? Platform ? Trailer
Immediately available | Inquiry No.: 27678 | Delivery to your address possible
* We are happy to provide you with an individual offer
* ----
* GVW: 14.4t, Payload: 10.95t
Dcjdpfx Alsyadz Ro Heg
* LED lighting system
* GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs
* Tire pressure monitoring system (TPMS)
* 6.27m x 2.47m platform with galvanized front wall, 400mm high
* Excavator bucket rest made of hardwood, bolted to the front wall
* Deck height unladen 930mm / laden 870mm
* One-piece ramps with hot-dip galvanized grid grating, anti-slip design, can be pushed together to approx. 20 mm, secured by retaining rods and diagonal supports
* Ramp lift with vertically mounted, adjustable springs for easy single-person operation
* 4 UVV drop lashing rings (LC 6300 daN)
* Perforated outer frame (45° angled with hole pattern for lashing equipment, lashing force per point LC 2000 daN with a minimum spacing of 480 mm. Installation of drop lashing rings LC 3000 daN at approx. 600 mm intervals possible) with close cross profiling, high-webbed front and rear closures and rear drive-on slope, hot-dip galvanized
* 10 UVV lashing rings LC 3000 daN, retractable into existing hole grid in outer frame, additionally
* Further lashing points by drilled holes (Ø 50 mm, LC 1200 daN) in the front and rear crossmember
* Toolbox in front of the bulkhead
* Side marker lights with indicator function
* Softwood floor, 50 mm thick. Chassis hot-dip galvanized
* 2 container locks recessed in the front crossmember
* Height-adjustable telescopic landing gear at the front, fold-down supports at the rear
* Drawbar with 40 mm towing eye (hot-dip galvanized), height adjustable; 50 mm eye available on request
* 1 removable LED warning beacon at the rear
----
* Leasing, hire-purchase, financing, trade-in possible
* For example: 515 euros at 60 months term, no down payment, no final installment
* ----
* Our opening hours
* Monday - Thursday: 08:00 - 17:00
* Friday: 08:00 - 15:00
Outside opening hours available by appointment
We speak German, English, Polish, French
Leasing, financing, trade-in possible
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTAL14,4 to. Tand.- Tiefl., breite Rampe, Gummi
Pokliči
Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ - TA -R 14.4
----Brakes:
* EBS (Electronic Braking System)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating aggregate
----Drawbar / Drawbar Eye:
* Drawbar adjustable in height by 300 mm – drawbar extension by 250 mm to 2,250 mm
* 40 mm flanged drawbar eye
----Electrics / Lighting:
* Tire pressure monitoring with display capability in the truck via EBS signal (no truck-side installation required)
* 15-pin power connector
* LED tail lights 12 / 24 V
* LED rotating beacon (removable) at rear
----General Attachments:
* Support winch in front
* Externally mounted hot-dip galvanized folding supports at rear
* Plastic toolbox approx. 858 x 500 x 500 mm, front right, outside at the front wall
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* Preparation in front of front wall for retrofitting container locks
* Bolted front wall made of smooth sheet metal
* Sidewalls made of trapezoidal profile steel sheet, foldable with drop-side spring-assisted lifting device
* Steel rear wall can be slid between the ramps – storage bracket for unused rear wall inside by the front wall
* Rear stanchions bolted
* Rear approach angle approx. 860 mm
----Flooring:
* 50 mm softwood floor
* 12 mm thick and 270 mm wide rubber strips on the inside of ramps
* 12 mm thick and 210 mm wide rubber strips on the approach slope and externally on the low-bed platform (from front wall to end sill)
----Load securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Installation of 3 t drop lashing rings every 600 mm possible
* 1 x 6.3 t lashing ring at each front and rear corner
* Various drill holes in front wall and end sill for 1.2 t lashing options
----Ramps:
* One-piece mech. grating ramps with spring system for one-man operation, approx. 2,750 x 870 mm (can be compressed to 20 mm)
----Paintwork:
* Chassis, drawbar, front wall, tailgate, and ramps hot-dip galvanized
* Axles, springs, air tank, and flanged drawbar eye painted black
* Sidewalls painted RAL 9010 pure white
----Info:
Dsdpfx Aex Ipapjl Hocg
* --Reinforced and certified body according to EN 12642 XL incl. load securing certificate--
* Errors and prior sale excepted
* New vehicle with manufacturer’s warranty
----Delivery time:
Vehicle is immediately available
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTAL14,4 to. Tand.- Tiefl., breite Rampe, Gummi
Pokliči
Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * First inspection (ETÜ) - TA -R 14.4
----Brake System:
* EBS (Electronic Braking System)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with equalizing unit
----Drawbar / Flange Eye:
* Height-adjustable drawbar by approx. 300 mm - drawbar extension by 250 mm to 2,250 mm total length
* 40 mm flange-type towing eye
----Electrics / Lighting:
* Tire pressure monitoring with display option in the truck via EBS signal (without truck-side installation)
* 15-pin electrical connector
* LED rear lights 12 / 24 V
* Removable LED beacon at rear
----General Attachments:
* Landing leg at the front
* Externally mounted hot-dip galvanized folding supports at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm, externally mounted on the front right end wall
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Deck:
* Preparation in front of the bulkhead for later installation of container locks
* Bolted smooth steel bulkhead
* Foldable steel side walls with trapezoidal profile, with drop-side spring assist
* Removable steel rear wall, stowable inside at the front of the bulkhead when not in use
* Bolted rear stanchions
* Rear ramp bevel approx. 860 mm
----Flooring:
* 50 mm softwood flooring
* 12 mm thick and 270 mm wide rubber strips on the inside of the loading ramps
* 12 mm thick and 210 mm wide rubber strips on the ramp bevel and on the exterior of the low loader platform (from front bulkhead to rear cross member)
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Possible installation of 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each of the front and rear corners
* Various drillings in the front and rear cross members for 1.2 t lashing options
----Ramps:
* One-piece mechanical grating ramps with spring assistance for single-person operation, approx. 2,750 x 870 mm (collapsible to 20 mm thickness)
----Paint Finish:
* Chassis, drawbar, front wall, tailgate, and ramps hot-dip galvanized
* Axles, springs, air tanks, and flange eye painted in black
* Side walls painted in RAL 9010 pure white
----Information:
* Reinforced and certified superstructure according to EN 12642 XL, including load securing certificate
* Subject to errors and prior sale
* New vehicle with manufacturer’s warranty
----Delivery time:
Djdpfjx Ipbaex Al Hjcg
Vehicle is immediately available ex Eggerstorf
Mali oglas
Bovenden
710 km
Tristrani nagibni priklopnik
Müller-MitteltalKA-TA-R 14,4, Verzinkt, Alu-Bordwände
Pokliči
Stanje: rabljeno, lastna masa: 3.650 kg, največja dovoljena obremenitev: 10.750 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 07/2011, naslednji pregled (TÜV): 08/2024, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.430 mm, višina nakladalnega prostora: 900 mm, vzmetenje: zrak, velikost pnevmatike: 285/70R19.5, barva: bela, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 2 axles, tandem, air suspension, ABS (anti-lock braking system), tailgate, lashing eyes, underrun protection, front support legs, rear support legs, pendulum tailgates, height-adjustable drawbar.
Dcjdpoth Uavsfx Al Heg
Body: Tandem 3-way tipper trailer with aluminium sideboards, 2x Gigant axles, drum brakes!
Loading ramps available at an additional cost of €990.00 net! ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors excepted!
Mali oglas
Egestorf
860 km
Priklopnik z delovno ploščadjo
MÜLLER-MITTELTAL14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-R 14.4
----Brake System:
* EBS electronic braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Air suspension
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm up to 2,250 mm
* 40 mm flange towing eye
----Lighting / Electrical:
* TPMS (Tire Pressure Monitoring System)
* LED tail lights 12 / 24 V
* 15-pin power connector
----General Attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox mounted externally at the front right on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* Preparation in front of the bulkhead for retrofitting container locks
* Bolted smooth sheet metal bulkhead
* Trapezoidal-profiled, fold-down steel side walls with drop-side spring assists
* Steel rear wall, can be stowed between the ramp holders when not in use, inside in front of the bulkhead
* Bolted rear stanchions
* Rear drive-on slope approx. 860 mm
----Load Securing:
* Perforated outer frame, edged at approx. 45 degrees with 2 t lashing capacity every 480 mm
* Installation of 3 t fold-down lashing rings possible every 600 mm
* 1 x 6.3 t lashing ring at each front and rear corner
* Various holes for 1.2 t lashing options in bulkhead and rear crossmember
----Ramps:
Dcedeq Dyvyepfx Al Hog
* One-piece mechanical grating drive-up ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (collapsible down to 20 mm)
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, bulkhead, rear wall, tailgate, and drive-up ramps
* Side wall color in RAL 9010 pure white
* Painting of side walls in any RAL color available at extra cost
----Info:
* — Reinforced and certified body according to EN 12642 XL including load securing certificate —
* New vehicle with manufacturer warranty
* Errors and prior sale excepted
----Delivery time:
* Immediately available ex Egestorf
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTAL14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-R 14.4
----Braking System:
* EBS Electronic Braking System
* Emergency release mechanism for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Air suspension
----Tow Bar / Flange Towing Eye:
* Height-adjustable tow bar, adjustable by 300 mm
Dcjdspk Dv Rspfx Al Heg
* Tow bar extension by 250 mm to a total of 2,250 mm
* 40 mm flange towing eye
----Lighting / Electrics:
* Tire pressure monitoring system (TPMS)
* LED rear lights 12 / 24 V
* 15-pin power connector
----General Attachments:
* Jost landing gear at the front
* Externally mounted hot-dip galvanized folding supports at the rear
* Plastic toolbox on the front right side of the headboard
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* Preparation in front of the headboard for retrofitting container locks
* Bolted headboard made of smooth sheet metal
* Trapezoidal profiled drop-side walls made of steel, foldable with drop-side spring assist
* Steel rear wall insertable between ramp mounts; when not in use, stowed inside in front of the headboard
* Bolt-on rear posts
* Rear approach angle approx. 860 mm
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Possible installation of 3 t drop lashing rings every 600 mm
* One 6.3 t lashing point in each front and rear corner
* Various holes in the front and rear cross member for 1.2 t lashing options
----Ramps:
* One-piece mechanical grid ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be telescoped down to 20 mm)
----Painting:
* Hot-dip galvanized chassis as well as tow bar, headboard, rear wall, tailgate, and ramps
* Side wall color RAL 9010 pure white
* Painting of side walls in a RAL color of choice available at extra cost
----Information:
* --Reinforced and certified body according to EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately ex works Egestorf
Mali oglas
Egestorf
860 km
Priklopnik z delovno ploščadjo
MÜLLER-MITTELTAL14,4 to. Tiefl. , luftgefedert - Einschubrampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 10.360 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 14.4:
----Brakes:
* Electronic Brake System (EBS)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* Gigant axles
----Suspension:
* Air suspension with lift and lower facility
----Drawbar / Flange Eye:
* Drawbar height adjustable by approx. 300 mm
* 40 mm flange drawbar eye
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System with in-cab display via EBS signal; no truck-side installation required)
* LED lighting system
* 15-pin power connector
----General Attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding support legs at the rear
* Plastic toolbox, front right, mounted outside on the bulkhead
* Side underrun protection
Dcodpfx Aopk D Dqol Heg
* Plastic quarter mudguards
----Low Loader Deck:
* 50 mm softwood flooring
* Provision for retrofitting 20" container locks at front and rear
* Bolted bulkhead made of smooth sheet steel
* Fold-down side walls, trapezoidal profile, with drop-side spring assists
* Bolted, hot-dip galvanized rear stanchions
----Load Securing:
* Outer frame with holes, approx. 45° angled, 2 t lashing capacity every 480 mm
* Option to install 3 t recessed lashing rings every 600 mm
* Each of the front and rear corners fitted with 1 x 6.3 t lashing ring
* Various holes in front and rear cross members for 1.2 t lashing options
----Ramps:
* 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for pneumatic and tracked vehicles; stowed at the rear in a compartment integrated below the deck in the chassis
----Paintwork:
* Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall
* Vehicle fully hot-dip galvanized
----Information:
* New vehicle with manufacturer’s warranty
* Subject to error and prior sale
----Delivery Time:
* Available immediately ex Egestorf
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTAL14,4 to. Tiefl. , luftgefedert - Einschubrampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 10.360 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 14.4:
Dodpfxendpn So Al Hscg
----Braking System:
* Electronic Braking System (EBS)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* Gigant axles
----Suspension:
* Air suspension with lifting and lowering system
----Drawbar / Towing Eye:
* Drawbar height-adjustable by 300 mm
* 40 mm flange towing eye
----Electrics / Lighting:
* TPMS (tire pressure monitoring system with indicator function in the truck via EBS signal—no installation required on the truck side)
* LED lighting system
* 15-pin electrical connector
----General Accessories:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox mounted front right on the front wall
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Deck:
* 50 mm softwood floorboards
* Preparation for subsequent installation of 20" container locks at front and rear
* Bolted, smooth sheet metal front wall
* Side walls made of trapezoidal-profiled steel, foldable with drop-side spring assist
* Hot-dip galvanized bolt-on rear stanchions
----Load Securing:
* Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing points every 480 mm
* Option for 3 t folding lashing brackets every 600 mm
* 1 x 6.3 t lashing ring in each front and rear corner
* Various holes in front and end crossmembers for 1.2 t securing points
----Ramps:
* 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles, stored in a compartment underneath the loading area in the chassis, accessible from the rear
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall
* Entire vehicle hot-dip galvanized
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Immediately available ex works Egestorf
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTAL14,4 to. Tandem Absetzcont.-Anh., Sonderpreis
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 12.080 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2024, dolžina tovornega prostora: 3.900 mm, širina tovornega prostora: 1.920 mm, višina nakladalnega prostora: 415 mm, Leto izdelave: 2022, Oprema: ABS, * ETM-TA 14.4:
----Brakes:
* Wabco ABS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalizer unit
----Drawbar / Flange towing eye:
* Height-adjustable drawbar (+/- 150 mm)
* 40 mm bolt-on towing eye
----General attachments:
* Jost landing gear at the front
* Side underrun protection
* Foldable A-panel at the rear
----Electrics / Lighting:
* 15-pin power connector
* Multi-chamber tail lights
----Superstructure:
* Fixed steel front and side walls
* Removable steel rear wall
* Floor made of 50 mm softwood
* 1 sliding plate cover 750 x 1,000 mm at the front incl. 2 removable skip stops, front in 2 positions
* Rear cross member for attaching aluminium ramps, incl. 2 additional drop-down supports at the rear
----Loading edge:
* Unloaded loading edge approx. 710 mm
----Load securing:
* 4 removable skip stops, can be inserted into 2 positions for lateral centring of the skips
* On each side: 1 x (13.5 t) UVV lashing point for attaching tensioning devices
* 2 ratchet tensioners (spindle adjustment) with compensating chain and quick-shortener (tensioning force 6,300 kg)
----Tyres:
* Tyres: 285/70R19.5
----Wheelbase:
* Wheelbase: 1,140 mm
----Paintwork:
* Chassis, front wall, side walls, mudguards, drawbar, rear drop supports hot-dip galvanized
* The axles, springs, landing gear, and air tank painted in a black tone
Dedpjl Th Eyefx Al Hocg
----General information:
* Vehicle has a one-day registration in 06/2024, due to missing tyre pressure monitoring system it has not been loaded/used
* Subject to errors and prior sale
----Delivery time:
* Immediately available ex Egestorf on the A7
Mali oglas
Egestorf
860 km
Prikolica
MÜLLER-MITTELTAL14,4 to. Tandem Absetzcont.-Anh., Sonderpreis
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 12.080 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2024, dolžina tovornega prostora: 3.900 mm, širina tovornega prostora: 1.920 mm, višina nakladalnega prostora: 415 mm, Leto izdelave: 2022, Oprema: ABS, * ETM-TA 14.4:
----Brakes:
* Wabco ABS braking system
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalizer unit
----Drawbar / Flange Drawbar Eye:
* Height-adjustable drawbar (+/- 150 mm)
* 40 mm bolt-on drawbar eye
----General Attachments:
* Jost landing gear at the front
* Lateral underrun protection
* Foldable A-frame shield at the rear
----Electrics / Lighting:
* 15-pin power socket
* Multi-chamber taillights
Dcsdpel Th Dmjfx Al Hjg
----Body:
* Fixed steel front and side walls
* Removable steel rear wall
* Floor made of 50 mm softwood
* 1 sliding steel plate support 750 x 1,000 mm at the front, incl. 2 interchangeable skip stops at the front, plug-in at 2 positions each
* Rear crossmember designed for aluminum loading ramps, incl. 2 additional drop-down supports at the rear
----Loading Edge:
* Unloaded loading height approx. 710 mm
----Load Securing:
* 4 repositionable skip stops, can be placed in 2 positions for lateral centering of skips
* Each side with 1 x (13.5 t) UVV tie-down point for securing lashings
* 2 ratchet tensioners (spindle adjustment) with balancing chain and quick shortener (tension force 6,300 kg)
----Tyres:
* Tyres: 285/70R19.5
----Wheelbase:
* Wheelbase: 1,140 mm
----Paint / Finish:
* Chassis, front wall, side walls, mudguards, drawbar, rear drop supports hot-dip galvanized
* Axles, springs, landing gear, and air tanks painted in black
----General Information:
* Vehicle has a day registration from 06/2024 due to missing tire pressure monitoring system and has not been loaded/used
* Errors and prior sale excepted
----Delivery Time:
* Available immediately from Egestorf on the A7
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* Drum brakes
* Electronic Braking System (EBS)
* Emergency release device for spring-loaded cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
Dsdpfsrvvflex Al Hscg
----Drawbar / Flange Drawbar Eye:
* Height-adjustable drawbar (adjustable by 300 mm)
* Drawbar extension by 250 mm to a total length of 2,250 mm
* 40 mm flange drawbar eye
----Lighting / Electrics:
* Tire Pressure Monitoring System (TPMS)
* LED lighting
----General Attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox mounted front right on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood flooring
* Preparation for subsequent mounting of container locks in front of the bulkhead
* Bolted smooth sheet steel bulkhead
* Side walls made of trapezoidal-profiled steel, foldable with board wall spring lifts
* Steel rear wall, slidable between the ramps — storage bracket for unused rear wall in front of the bulkhead
* Bolted rear stakes
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm
* Option to fit 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each of the front and rear corners
* Various drill holes in the header and tail member for 1.2 t lashing options
----Ramps:
* One-piece mechanical grating ramps with spring assembly for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm)
* Rear access slope approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, bulkhead, loading ramps, and rear wall
* Drop side color in RAL 9010 pure white
* Painting of the side walls in an RAL color of your choice available for an additional charge
----Information:
* -- Reinforced and certified body according to EN 12642 XL incl. load securing certificate --
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from week 08/2026
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* Drum brakes
* Electronic braking system (EBS)
* Emergency release for spring brake cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensation unit
----Drawbar / Flange Drawbar Eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm to a total of 2,250 mm
* 40 mm flange drawbar eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General Attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox at the front right on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood flooring
* Preparation in front of the bulkhead for retrofitting container locks
* Bolted bulkhead made of smooth sheet metal
* Fold-down side walls made of trapezoidal profiled steel sheets, with drop-side lift assist
* Steel rear wall, can be slid in between ramps – storage bracket in front of the bulkhead when not in use
* Bolted rear stanchions
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing rings every 600 mm
* In each corner, front and rear: 1 x 6.3 t lashing ring
* Various holes in the front and rear crossmember for 1.2 t lashing options
----Ramps:
* One-piece mechanical mesh ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (can be collapsed to 20 mm)
* Rear approach angle approx. 860 mm
----Painting:
* Hot-dip galvanized chassis, drawbar, bulkhead, ramps, and rear wall
* Side wall color in RAL 9010 pure white
* Painting of side walls in any RAL color available at extra charge
Dcjdpfeq Dyvvex Al Heg
----Information:
* Reinforced and certified superstructure according to EN 12642 XL including load securing certificate
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from week 08/2026
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTAL14,4 to Tand- Tiefl mit 2- Seitenkipper
Pokliči
Stanje: novo, največja dovoljena obremenitev: 10.400 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * ETK-TA-R 14.4:
----Brakes:
* EBS (Electronic Braking System)
* Emergency release device for spring-loaded brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic suspension with tandem balancing unit
----Drawbar / Flange Eye:
* Height-adjustable drawbar (300 mm) with 40 mm flange towing eye
----Electrics / Lighting:
* Tyre pressure monitoring with in-cab display via EBS signal (no additional truck-side installation required)
* 15-pin power connector
* LED tail lights
Dcodpfxetr Suce Al Hsg
----General Attachments:
* Mechanical support winch at the front
* Two mechanical folding supports at the rear
* Plastic tool box approx. 750 x 350 x 300 mm, right-hand side
* Bolt-on underride guard
* Plastic quarter mudguards
----Chassis:
* Main frame made of high-tensile fine-grained steel
----Tipper Body:
* Mesh hooks on the sides and rear in the central locking mounts, plus 2 hooks on the front wall
* Steel pallet 2-way tipper body, fixed headboard made of smooth sheet metal, continuous side walls – drop-down without central stanchions, sideboard spring assists and swinging function via manual central locking
* Rear stanchions bolted
* Steel rear wall inserted in front of ramps
* 1 x 5 t lashing point in each corner, plus 4 x 3 t lashing rings on each side, recessed into outer frame
* 4 mm floor made of high-tensile fine-grained steel
----Ramps:
* Two-piece mechanical grid ramps with aluminium tip: 2,150 + 1,300 mm x 600 mm (manually retractable to 80 mm)
----Paintwork:
* Chassis, drawbar, rear stanchions, underride guard, mechanical props, and loading ramps hot-dip galvanised
* Axles, springs, air tanks, flange towing eye, and support winch painted in black
* Sideboards and body finished in RAL 9010 pure white
* Optional body and side wall painting in other RAL shades at extra cost
----Information:
* Brand new vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from CW 07/2026
Mali oglas
Egestorf
860 km
Tristrani nagibni priklopnik
MÜLLER-MITTELTAL14,4 to Tand- Tiefl mit 2- Seitenkipper
Pokliči
Stanje: novo, največja dovoljena obremenitev: 10.400 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * ETK-TA-R 14.4:
----Brakes:
* EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axle:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalizer assembly
Dcodpfx Aljtr St Uj Hsg
----Drawbar / Flange-Type Towing Eye:
* Height-adjustable drawbar by 300 mm with 40 mm flange towing eye
----Electrics / Lighting:
* Tire pressure monitoring with display capability in the truck via EBS signal, no truck-side installation required
* 15-pin power connector
* LED tail lights
----General Attachments:
* Mechanical landing gear at the front
* Two mechanical folding support legs at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side
* Bolted underrun protection
* Plastic quarter mudguards
----Chassis:
* Main frame made of fine-grain steel
----Tipper Platform:
* Mesh hooks on sides and rear located at the central locking mounts, plus 2 on the front wall
* Steel pallet two-way tipping body, front wall fixed, made of smooth plate; continuous collapsible sidewalls (without center posts), with drop side spring lifters and manual central locking for tilting
* Rear stanchions bolted
* Steel rear wall slid in front of the ramps
* Each corner with 1 x 5 t lashing point; 4 x 3 t lashing rings recessed into the outer frame on each side
* 4 mm floor made of fine-grain steel
----Ramps:
* Two-piece mechanical grating drive-up ramps with aluminium tip section 2,150 + 1,300 mm x 600 mm (can be slid together manually up to 80 mm)
----Paintwork:
* Chassis, drawbar, rear stanchions, underrun protection, mechanical stabilizer legs, and ramps hot-dip galvanized
* Axles, springs, air tanks, towing eye, and landing gear painted in black
* Sidewalls and platform in RAL 9010 pure white
* Paint finish of sidewalls and tipper platform available in RAL color of choice at extra charge
----Information:
* New vehicle with manufacturer warranty
* Subject to prior sale and errors
----Delivery time:
* Available from calendar week 07/2026
Mali oglas
Egestorf
860 km
Kiper prikolica skip
Müller-Mitteltal14,4 to. Tand. Cont. Absetzanh. -feuerv
Pokliči
Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 2.140 kg, največja dovoljena obremenitev: 12.260 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, vzmetenje: jeklo, velikost pnevmatike: 285/ 70 R 19,5, medosna razdalja: 1.140 mm, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, - TM-TA 14.4:
Djdsxuhy Eepfx Al Hscg
- incl. 2 ratchet tensioners permanently mounted on the outer frame with chain box, each side with eyelet and quick shortener, Y-special design, 6.3 t
- Tension force with load securing certificate
- Wabco EBS
- RDÜ tire pressure monitoring system
- Emergency release device for spring actuators
- Drum brakes
- 2 x 7 t Gigant axles
- Parabolic springs with equalizing unit
- Jost landing gear at the front
- 2 external drop-down support legs at the rear
- Height-adjustable, hot-dip galvanized drawbar +/- 150 mm
- Hot-dip galvanized chassis
- 15-pin power connector
- LED tail lights
- Closed single plastic mudguards
- Folding A-sign at the rear
- Plastic collision protection buffers on the underride guard
- Hot-dip galvanized underride protection with integrated chain storage boxes (W=370 mm x D=420 mm x H=480 mm) front left & right
- 2 repositionable skip stops for lateral centering of skips
- Skip stops at the front with pendulum stops, insertable in 4 positions
- On each side, 2 x 5.3 t UVV lashing rings for attaching tie-down elements
- Axles, springs, air tanks, and landing gear painted in black
- Subject to errors and prior sale
- New vehicle with manufacturer’s warranty
- Available from week 05/2026
Mali oglas
Egestorf
860 km
Kiper prikolica skip
Müller-Mitteltal14,4 to. Tandem Absetzcont.-Anh., Sonder
Pokliči
Stanje: skoraj kot novo (rabljeno), največja dovoljena obremenitev: 14.400 kg, skupna masa: 12.080 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.900 mm, širina tovornega prostora: 1.920 mm, višina nakladalnega prostora: 415 mm, vzmetenje: parabolično listje (vzmet), velikost pnevmatike: 285/70R19.5, medosna razdalja: 1.140 mm, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2022, - ETM-TA 14.4:
- Wabco ABS braking system
- Emergency release system for spring-loaded cylinders
- Drum brakes, 2 x 7 t Gigant axles
- Parabolic springs with tandem balance unit
- Height-adjustable drawbar (+/- 150 mm) with 40 mm bolt-type towing eye
- Jost landing gear at front, side underrun protection
- Foldable A-panel at rear
- 15-pin electrical connector, multi-chamber tail lights
- Fixed steel front and side walls
- Removable steel tailgate
- Floor made of 50 mm softwood
- 1 sliding wear plate 750 x 1,000 mm in the front area incl. 2 drop-in skip stops at the front, adjustable in 2 positions
- 4 repositionable skip stops, adjustable in 2 positions, for lateral centering of containers
- 1 x (13.5 t) UVV lashing eye per side for attaching tensioning elements
- 2 ratchet tensioners (spindle adjustment) with equalizing chain and quick-shortener (tension force 6,300 kg)
- Rear crossmember for attaching aluminium loading ramps incl. 2 additional rear drop legs
- Loading edge (unladen): approx. 710 mm
- Chassis, front wall, side walls, mudguards, drawbar, and rear drop legs hot-dip galvanized
- Axles, springs, landing gear, and air reservoir painted black
- Tyres: 285/70R19.5
- Wheelbase: 1,140 mm
- Loading edge (unladen): approx. 710 mm
- Colour: hot-dip galvanized
- Vehicle with one-day registration (06/2024), not loaded/used due to missing tyre pressure monitoring system
- New vehicle with manufacturer's warranty
- Errors and prior sale excepted
Dcsdsxvbcpjpfx Al Hog
- Immediately available ex Egestorf on the A7
Mali oglas
Egestorf
860 km
Kiper prikolica skip
Müller-Mitteltal14,4 to. Tand. Cont. Absetzanh. -feuerv
Pokliči
Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 2.140 kg, največja dovoljena obremenitev: 12.260 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 285/ 70 R 19,5, medosna razdalja: 1.140 mm, Leto izdelave: 2026, - TM-TA 14.4:
- Wabco EBS (Electronic Braking System)
- RDÜ Tire Monitoring System
- Emergency release device for spring brake cylinders
- Drum brakes
- 2 x 7-ton Gigant axles
- Parabolic springs with compensation unit
- Jost landing gear at the front, 2 x external drop-down supports at the rear
- Height-adjustable +/- 150 mm hot-dip galvanized drawbar
- Hot-dip galvanized chassis
Dcodpjxu Hplofx Al Hjg
- 15-pin power connector
- LED tail lights
- Enclosed single plastic mudguards
- Foldable A-sign at the rear
- Plastic impact bumpers on underrun protection
- Hot-dip galvanized underrun protection with integrated chain compartment B = 370 mm x D = 420 mm x H = 480 mm, front left & right
- 2 repositionable skip stops for lateral centering of the skips
- Front skip stops with 4-position swing-type bolts
- Each side with 2 x 5.3-ton UVV lashing rings for attaching tensioning devices
- Axles, springs, air tanks, and landing gear painted in black
- Subject to errors and prior sale
- New vehicle with manufacturer's warranty
- Available from CW 05 / 2026
Mali oglas
Egestorf
860 km
Tristrani nagibni priklopnik
MÜLLER-MITTELTAL14,4 to Kipper/ Rampen, 1 mtr Gitteraufsätze
Pokliči
Stanje: novo, največja dovoljena obremenitev: 10.700 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 1.500 mm, Oprema: ABS, * KA-TA-R 14.4:
* Front wall and floor hot-dip galvanized
* Wabco ABS
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Parabolic springs with tandem equalizer unit
* Height-adjustable hot-dip galvanized drawbar (approx. 300 mm) with 40 mm flanged towing eye
* Jost mechanical landing gear at the front
* Rear: 2 mechanical hot-dip galvanized folding supports
* 15-pin power connector
* Multi-chamber tail lights
* Hot-dip galvanized bolted underrun protection
* Tool box made of galvanized steel sheet, mounted right side
* Plastic quarter mudguards
* Hot-dip galvanized chassis
* Steel pallet three-way tipper body
* Continuous sidewalls in white, top with internal pipe reinforcement, foldable without center stanchions, with drop side spring assist
* Tailgate foldable and swinging, manual central locking
* Hot-dip galvanized screwed rear stanchions
* Each corner equipped with 1 x 5 t lashing point, plus 4 x 3 t lashing rings recessed into the outer frame per side
* 4 mm fine-grained steel floor plate
* Net hooks, rear ramp mounting rail
* Prepared for subsequent fitting of drop side extensions
* Reinforced body with load securing certificate per EN 12642 XL
* 1 pair of aluminium ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable rear storage compartment recessed into the chassis below the loading area
* Axles, springs, air reservoir, and landing gear painted in a shade of black
Djdpfx Asp Ncmasl Hecg
* Side walls painted RAL 9010 pure white
* 1 meter galvanized mesh side extensions
* Tyres: 285/70 R 19.5
* Sample images
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
* Immediately available ex works Egestorf, A7
Mali oglas
Schwebheim
554 km
Prikolica z nizko platformo
Müller MitteltalETUE-TA 18,0 18 t GG Tandemtieflader
Pokliči
Stanje: rabljeno, lastna masa: 4.550 kg, največja dovoljena obremenitev: 13.450 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2016, dolžina tovornega prostora: 6.540 mm, širina tovornega prostora: 2.480 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: bež, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, 10 pairs of lashing rings, loading height approx. 900 mm, customer vehicle, -- subject to misprints, errors and changes -- sample images --, More data at: !, More Details: !
Dcjdsy Niwwopfx Al Hsg
Mali oglas
Schwebheim
554 km
Prikolica z nizko platformo
Müller MitteltalT 3 3 Achs Tieflader- Anhänger
Pokliči
Stanje: rabljeno, lastna masa: 6.500 kg, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2010, vzmetenje: jeklo, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Vehicle is being sold on behalf of the customer. Some wooden planks are damaged. Equipped with 17 pairs of lashing rings. Loading height approx. 900 mm. -- Subject to typographical errors, mistakes, and modifications. Sample images used. More data available at: !, More Details: !
Dcodpfxsy Izvve Al Heg
Mali oglas
Schwebheim
554 km
Tristrani nagibni priklopnik
Müller MitteltalKA-TA-RT 18,0 18 t Tandemkipper- Tieflader
Pokliči
Stanje: rabljeno, lastna masa: 4.190 kg, največja dovoljena obremenitev: 13.810 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 11/2016, vzmetenje: zrak, velikost pnevmatike: 385/55R22,5 160J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385/55R22,5 160J, velikost zadnje pnevmatike: 385/55R22,5 160J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Sidrne zanke, aluminijaste stranske stranice 800 mm, doplačilo za rampe 800 €, -- Pridržujemo si pravico do tiskarskih napak, sprememb in razlik v podatkih, vzorčne slike --, Več podatkov na: !, Več podrobnosti: !
Dcodpfx Asy Hc T Hsl Hjg
Znak zaupanja
Prodajalci, certificirani pri TruckScout24

Mali oglas
Egestorf
860 km
Odvozna prikolica
MÜLLER-MITTELTALRA-T 18,0 Außenroller, feuerverzinkt, Neu
Pokliči
Stanje: novo, največja dovoljena obremenitev: 14.620 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * RA-T 18.0 / 018:
* Wabco EBS-E (electronic braking system)
* RDÜ tyre pressure monitoring system
* Emergency release for spring brake cylinders
* Disc brakes
* 2 x 10 t BPW wide-track axles
* Air suspension (automatic lowering when brake is uncoupled)
* Drawbar approx. 2,300 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle
* Plastic toolbox 450 x 470 mm mounted right side
* Side-mounted mesh box 1,000 x 500 x 5000 mm
* Enclosed plastic mudguards front & rear
* Closed side underrun protection, suitable as advertising panel
* Rear underrun protection
* Rear plastic anti-collision buffers
* Rear ADR plate
* 15-pin electrical connector
* LED tail lights
* Track length approx. 6,830 mm
* Pneumatic 4-point clamping lock
* Mechanically adjustable stop brackets (2 positions) front left and right on the guide tracks
* 265/70 R 19.5 twin tyres
* Unladen weight: 3,220 kg
* --Permissible gross weight technically up to 20,000 kg--
* Ride height loaded: approx. 1,130 mm
* Suitable for container lengths of 5,500 – 7,000 mm
* Hot-dip galvanized chassis
* Air tanks, axles, turntable, and drawbar
* New vehicle with manufacturer's warranty
Dcodpsv Nulzjfx Al Hsg
* Subject to errors and prior sale
* Available from approx. week 29 / 2026
Mali oglas
Schwebheim
554 km
Prikolica z nizko platformo
Müller MitteltalT 3 3 Achs Tieflader- Anhänger
Pokliči
Stanje: rabljeno, lastna masa: 6.500 kg, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2010, vzmetenje: jeklo, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Vehicle is being sold on behalf of the customer. Some wooden planks are damaged. Equipped with 17 pairs of lashing rings. Loading height approx. 900 mm. -- Subject to typographical errors, mistakes, and modifications. Sample images used. More data available at: !, More Details: !
Dcodpfx Aloyy I U No Hsg
Mali oglas
Schwebheim
554 km
Kiper prikolica
Müller MitteltalKA-TA-T 13,5 t Tandemkipper- Tieflader
Pokliči
Stanje: rabljeno, lastna masa: 3.320 kg, največja dovoljena obremenitev: 10.180 kg, skupna masa: 13.500 kg, konfiguracija osi: 2 osi, prva registracija: 12/2003, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 5.040 mm, vzmetenje: jeklo, velikost pnevmatike: 285/70R19,5 148/145J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 285/70R19,5 148/145J, velikost zadnje pnevmatike: 285/70R19,5 148/145J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Sidrne ušesa, doplačilo za rampe: 800 €, -- Pridržujemo si pravico do tiskarskih napak, sprememb in drugih nepravilnosti, slike so simbolične --, Več podatkov na zahtevo!, Več podrobnosti: !
Dcedpfx Ajyy I S Iol Heg
Mali oglas
Coppenbrügge
773 km
Nizki nakladalnik
Müller-MitteltalT 3 Profi 30
Pokliči
Stanje: rabljeno, konfiguracija osi: 3 osi, vzmetenje: parabolično listje (vzmet), velikost pnevmatike: 235-75R17.5, Leto izdelave: 2010, 3-osni nizek priklopnik, dostopen od zadaj. Dovoljena skupna masa 30.000 kg, nosilnost 22.700 kg. Nakladalna površina 8.900 mm (7.000 + 1.900) x 2.550 mm, opozorilni paket za prekomerno širino, 12 pritrdilnih ušes ter 8 žepov za stebričke z možnostjo istočasnega pritrjevanja, 6 orodnih zabojev. Dvodelne hidravlične rampe cca. 2.100+2.000 x 800 mm z gumijasto oblogo, hidravlično zadnjo podporo. BPW osi, EBS, parabolično vzmetenje z izravnalno enoto, pnevmatike 235-75 R 17.5. Pokrivljena vlečna roka, premična vlečna kljuka 40+50 mm. 2-cevni zračni (duomatik) in 2-cevni hidravlični priključek, 24 voltov. Višina nakladanja praznega vozila cca. 910 mm. Barva oranžna. Tehnični pregled veljaven do 03-2027.
= Dodatne informacije =
Djdpjy Evvlsfx Al Hocg
Dimenzije pnevmatik: 235-75R17.5
Vzmetenje: parabolično vzmetenje
Lastna masa: 7.300 kg
Nosilnost: 22.700 kg
Skupna dovoljena masa: 30.000 kg
Država proizvodnje: DE
Za več informacij se obrnite na Jan-Marc Schwickert.
Olajšamo vam iskanje: "müller-mitteltal t 4 kompakt 40"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.


Več kot 140.000 povpraševanj po nakupu mesečno
Izvedite več zdaj
+49 201 858 95 507



























































































































































































































































































































































