Müller-Mitteltal T 4 Kompakt 40 nakup rabljenega (64.923)

Stanje: rabljeno, konfiguracija osi: 2 osi, skupna širina: 25.000 mm, skupna višina: 40.000 mm, Leto izdelave: 2014, Oprema: ABS, Za vprašanja v zvezi z vozilom je vam na voljo gospod Seidel (po telefonu). MÜLLER MITTELTAL SF32BM/BT betonska polprikolica Nadgradnja: Liebherr HTM 1004 10m³, osi BPW, bobnaste zavore, vzmetni akumulator, Wabco ABS, 1. os dvižna, zračno vzmetenje, dovoljena skupna masa: 32.000 kg, lastna masa: 6.510 kg, nosilnost: 25.490 kg, profil pnevmatik: 1. os 14-15mm, 2. os 10mm Po želji vam pripravimo ponudbo za leasing ali financiranje. Gospod Seidel vas z veseljem vodi po telefonu. Več informacij najdete na naši spletni strani. Csdpfxsyfu Sdo Al Horb ... Napake, spremembe in vmesna prodaja pridržane!!! = Dodatne informacije = Dovoljena skupna masa: 32.000 kg Za dodatne informacije se obrnite na gospoda Tobiasa Eberta.

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 24.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axle: * 3 x 11 t Gigant axles * Centre axle liftable ----Drawbar: Crodpepk D Awefx Al Hjb * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye & height adjustment ----Electrics / Lighting: * LED rear lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Toolbox made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized sheet steel (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear bumper buffer * Mechanical drop-down supports at the rear ----Container / Low-bed platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll-off containers * Steel floor with roll grooves in the bogie area * When transporting roll-off containers, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point container locking and mechanically insertable front stop angles in the running rails * Load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 skip stops fitted with pivoting stops ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips * 4 cloverleaf lashing points on each side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld bead as anti-slip surfacing in the running area of the access slope * 1 pair of aluminium loading ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Ride height, loaded: approx. 1,003 mm ----Payload: * Payload: 18,900 kg ----Paintwork: * Reflective contour marking tape, side and rear * Axles, turntable, drawbar and air tank painted black * Hot-dip galvanized main frame ----Information: * Gross vehicle weight technically possible: 27,000 kg * New vehicle without initial registration with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 47/2026

Stanje: novo, največja dovoljena obremenitev: 10.750 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm, up to 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED lighting ----General Attachments: * Support winch at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on headboard * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Fittings for retrofitting container locks in front of the headboard and rear slope for the transport of 20" containers * Bolted headboard, smooth sheet * Side walls: folding, split once in the middle, made of trapezoidal sheet metal * Steel rear wall, can be inserted between ramp holders, stored in front of the headboard when not in use * Bolted rear stakes ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm * Option for installation of 3 t drop lashing rings every 600 mm * One 6.3 t lashing ring in each of the front and rear corners * Various holes in headboard and end beam for 1.2 t lashing options * Profifix lashing rail in longitudinal axis, central, for lashing up to LC 3000 daN ----Ramps: * One-piece mechanical grating drive-on ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm clearance) * Rear approach slope approx. 860 mm chassis ----Wheelbase: * Wheelbase 1,140 mm ----Paintwork: * Drawbar, headboard, tailgate, folding supports and drive-on ramps hot-dip galvanized * Axles, springs, air tank, flange towing eye and support winch painted in black Cedpfov Eq Evex Al Herb * Side wall panels painted in a RAL colour of your choice (except special or metallic paints), can be changed up to approx. 6 weeks before completion ----Information: * Reinforced and certified body according to EN 12642 XL including load securing certificate * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery time: * Available from approx. week 30 / 2026

Stanje: novo, največja dovoljena obremenitev: 10.750 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm up to 2,250 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power plug * LED lighting ----General Fittings: * Support winch at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right, outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Preparation before the bulkhead and rear slope for retrofitting container locks for the transport of 20" containers * Bolted bulkhead made of smooth sheet steel * Side walls made of trapezoidal-profiled steel, folding design, divided centrally * Steel rear wall, can be inserted between the ramp brackets, stowed inside in front of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Slotted outer frame, angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Optionally, installation of 3 t folding lashing rings every 600 mm * Each front and rear corner equipped with 1 x 6.3 t lashing point * Various holes for 1.2 t lashing options in the bulkhead and rear crossmember * Profifix lashing rail along the centerline for lashing options up to LC 3000 daN ----Ramps: Credpfx Alov D Tcbe Hjb * One-piece mechanical grid approach ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach slope approx. 860 mm chassis height ----Wheelbase: * Wheelbase 1,140 mm ----Paintwork: * Drawbar, bulkhead, rear panel, folding supports, and approach ramps hot-dip galvanized * Axles, springs, air tank, flange drawbar eye, and support winch painted in black * Side wall paint in a RAL color of your choice (special or metallic paints not available), can be changed up to approx. 6 weeks before completion ----Information: * Reinforced and certified construction according to EN 12642 XL including load securing certificate * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Available from approx. week 30 / 2026

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axle: * 3 x 11 t Gigant axles * Lifting middle axle ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear bumpers * Mechanical rear drop-down supports ----Container / Low-bed Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers * Steel floor with roller recesses in the bogie area * For roll-off container transport, container length of 5,500 - 7,000 mm possible * Pneumatic 4-point container clamp locking as well as mechanically plug-in front stop angles in the guide tracks * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ capacity possible * Includes 8 repositionable skip stops for lateral centering of the skips, front 4 skip stops plug-in with pendulum stoppers ----Load Securing: Csdpfxjtplv Tj Al Hjrb * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive load securing of skips * 4 lashing rails in cloverleaf design (side) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld bead as anti-slip coating in the ramp incline running area * 1 pair of aluminum approach ramps (16 t/pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar and air tanks painted in black * Hot-dip galvanized main frame ----Information: * Permissible gross weight of 27,000 kg technically possible * New vehicle without initial registration with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 47/2026

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Tool box made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized sheet steel (W: 960 mm x H: 300 x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash guards * Plastic rear impact protection buffer * Mechanical rear support legs ----Container / Low Loader Deck: Codpfx Aljpk D Iio Hsrb * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll containers * Steel sheet floor with roller recesses in the bogie area * Suitable for roll-off container transport with container lengths from 5,500 to 7,000 mm * Pneumatic 4-point container clamp lock and mechanical plug-in end stops at the front of the tracks * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering, front 4 skip stops plugged in with swinging end stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tension elements for positive and non-positive securing of the skips * 4 cloverleaf-style lashing bars on each side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Weld bead as anti-slip coating in the ramp run-up area * 1 pair of aluminum loading ramps (16 t/pair) 2,800 x 400 mm suitable for rubber-tyred and tracked vehicles (lockable storage compartment at the rear) ----Tires: * Tires: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on the sides & rear * Axles, turntable, drawbar, and air tanks painted in black * Hot-dip galvanized main frame ----Information: * Permissible total weight technically possible: 27,000 kg * New vehicle without first registration, with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 47/2026

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic braking system (EBS) * Emergency release for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Preparation in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet metal * Fold-down side walls made of trapezoidal profiled steel sheets, with drop-side lift assist * Steel rear wall, can be slid in between ramps – storage bracket in front of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * In each corner, front and rear: 1 x 6.3 t lashing ring * Various holes in the front and rear crossmember for 1.2 t lashing options ----Ramps: * One-piece mechanical mesh ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm ----Painting: * Hot-dip galvanized chassis, drawbar, bulkhead, ramps, and rear wall * Side wall color in RAL 9010 pure white * Painting of side walls in any RAL color available at extra charge Crjdpexglibsfx Al Heb ----Information: * Reinforced and certified superstructure according to EN 12642 XL including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 08/2026

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic braking system (EBS) * Emergency release for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting Crjdpfx Aloxglh Ro Heb ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Preparation in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet metal * Fold-down side walls made of trapezoidal profiled steel sheets, with drop-side lift assist * Steel rear wall, can be slid in between ramps – storage bracket in front of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * In each corner, front and rear: 1 x 6.3 t lashing ring * Various holes in the front and rear crossmember for 1.2 t lashing options ----Ramps: * One-piece mechanical mesh ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm ----Painting: * Hot-dip galvanized chassis, drawbar, bulkhead, ramps, and rear wall * Side wall color in RAL 9010 pure white * Painting of side walls in any RAL color available at extra charge ----Information: * Reinforced and certified superstructure according to EN 12642 XL including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 08/2026

Stanje: novo, največja dovoljena obremenitev: 12.200 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * TM-TA 14.4: ----Brakes: * Wabco EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable hot-dip galvanized drawbar, +/- 150 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * 15-pin power socket * LED tail lights * RDÜ tire pressure monitoring system ----General Attachments: * Jost landing gear (front) * 2 x rear externally mounted drop-down supports * Enclosed single plastic mudguards * Folding "A" sign at the rear * Plastic underride guard buffers Cedpfx Aopk Dyxol Horb * Hot-dip galvanized protective underrun bar with integrated chain storage box, dimensions: W=370 mm x D=420 mm x H=480 mm, front left & right ----Load Securing: * Each side with 2 x 5.3 t UVV lashing rings for attaching tensioning elements * Includes 2 permanently mounted ratchet tensioners on the outer frame with chain box * Equalizing chain on both sides with eye and quick shortener, Y-special version, 6.3 t ----Skip Stops: * 2 interchangeable skip stops for lateral centering of skips * Front skip stops with swing-mounted stop, plug-in at 4 positions ----Paintwork: * Hot-dip galvanized chassis * Axles, springs, air tanks, and landing gear painted in black ----Information: * Lashing force with load securing certificate * Errors and prior sale excepted * New vehicle with manufacturer's warranty ----Delivery Time: * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 12.200 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * TM-TA 14.4: ----Braking System: * Wabco EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable, hot-dip galvanized drawbar, +/- 150 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * 15-pin electrical connector * LED rear lights * RDÜ tire pressure monitoring system Codpfx Aljl Thyqo Hsrb ----General Attachments: * Jost landing gear at the front * 2 x external drop supports at the rear * Closed plastic single mudguards * Folding "A" plate at the rear * Plastic underrun protection buffer * Hot-dip galvanized underrun protection with integrated chain storage box (W = 370 mm x D = 420 mm x H = 480 mm) front left & right ----Load Securing: * Each side with 2 x 5.3 t UVV lashing rings for attaching tensioning elements ----Skip Stops: * 2 removable skip stops for sideways centering of skips * Front skip stops with swiveling stop, pluggable in 4 positions ----Paintwork: * Hot-dip galvanized chassis * Axles, springs, air tanks, and landing gear painted in black ----Information: * Subject to errors and prior sale * New vehicle with manufacturer warranty ----Delivery time: * Available immediately ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 19.800 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2019, Oprema: ABS, * Müller Mitteltal 3-osna prikolica za zabojnike za odpad * Tip TM 2 24 * Za dva zabojnika za odpad od 7 do 10 m³ * Zavarovanje tovora s samo dvema verigama na zabojnik * Dvojne pnevmatike 265/70 R19,5 * Zračno vzmetenje * BPW osi * Vrtljivo vlečno uho pnevmatsko znižljivo s pnevmatskim sproščanjem * 8 UVV pritrdilnih obročev 5t za pritrditev napenjalnih elementov Cedpfx Ajyx R Enel Horb * 8 premakljivih omejevalnikov zabojnikov za bočno centriranje zabojnikov * EBS * Tehnično dovoljena skupna masa 27.000 kg

Stanje: novo, največja dovoljena obremenitev: 30.080 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal – without truck-side installation * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Warning panel packages front & rear * SmartBord infotool installed with pressure sensors for total axle load display per axle group * Reflective contour tape on the sides and rear * LED rotating beacon (removable) at the rear * 15-pin power connector * LED tail lights * Straight drawbar with 50 mm towing eye and stepless height adjustment * Front closed single plastic mudguards * Straight rear steel mudflaps, each with spray suppression * Side underrun protection * Superstructure in front of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments including lockable folding lids (folding lids opening to the rear) * Chassis made from high-strength fine-grained steel Crsdpfexmpydjx Al Heb * Floor over the bogie platform made of 50 mm softwood, and 60 mm softwood in the low loader platform * Outer planks of the drive-on ramps made of 50 mm hardwood * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the bogie platform, 1 pair each of 13.4 t lashing rings at the front and rear outer frame, 1 pair each of 10 t lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame, 5 t lashing rings bolted to the outer frame of the wheel recesses (2 at the front recess, 1 at the rear), 2 pairs of 6.4 t lashing rings on the excavator stick holder * 11 pairs of folding outriggers for a total width of 3 meters (not at the rear slope) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for the widening boards made of sheet steel, mounted transversely to the loading area in front of the first rear axle * Excavator stick holder above the rear axle up to the end of the approach slope approx. 2,300 x 740 x 190 mm * Two wheel recesses per side approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with retractable cover (storage for covers at the front on the bogie platform) for transporting wheel loaders with a wheelbase of 3,100 - 3,640 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm * Hydraulic lateral ramp shift * Loading area over the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loading height loaded approx. 890 mm +/- 20 mm (incl. 860 mm approach slope) * Chassis, bogie, folding outriggers, rear drop-down supports, and drive-on ramps galvanised * Axles, air tanks, and drawbar painted in black * Tires: 235/75R17.5 * Vehicle is galvanised * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 30.080 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Warning sign packages front & rear * SmartBord infotool installed with pressure sensors for displaying axle group loads * Reflective contour tape on the sides and rear * LED beacon (removable) at the rear * 15-pin electrical connector * LED tail lights * Straight drawbar with 50 mm towing eye and stepless height adjustment * Front enclosed individual plastic mudguards * Rear straight steel mudflaps with spray suppression * Side underrun protection * Extension in front of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments with lockable folding lids (folding lids open towards the rear) * Chassis made from high-strength fine-grain steel * Floor over bogie platform made of 50 mm softwood, and in the low-bed platform made of 60 mm softwood * Outer planks of the ramps made of 50 mm hardwood * Load securing package consisting of: 2 lashing eyes 6.4 t each at the front left and right on the main frame of the bogie platform; one pair of 13.4 t lashing rings at the front and rear sides of outer frame; one pair of 10 t lashing rings on each side foldable and lowerable, loadable in all directions, integrated into the side frame; 5 t bolted lashing rings on the outer frame of the wheel recesses (2 per front wheel recess, 1 per rear); 2 pairs of 6.4 t lashing rings at the excavator stick compartment * 11 pairs of fold-out outriggers for overall width of 3 m (not on the rear incline) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for width-extension planks, steel, mounted crosswise to the loading area in front of the first rear axle * Excavator stick compartment above the rear axle extending to the end of the ramp incline, approx. 2,300 x 740 x 190 mm * Two wheel recesses per side approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with retractable cover (storage for covers at the front on bogie platform) for transporting wheel loaders with wheelbase 3,100 – 3,640 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulic extendable tip, approx. 4,650 x 720 mm * Hydraulic sideward ramp displacement * Loading area above the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loaded deck height approx. 890 mm ± 20 mm (including 860 mm ramp incline) * Chassis, bogie, fold-out outriggers, rear supports, and access ramps fully hot-dip galvanized Crjdpfx Aoxmpyksl Heb * Axles, air tanks, and drawbar painted in black shade * Tires: 235/75R17.5 * Vehicle is fully hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 11.050 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, * Müller-Mitteltal KA-TA-R 14.4 Tandem Low-Loader Three-Way Tipper Trailer with Ramps * NEW VEHICLE * Available mid-May 2026 in RAL 9016 traffic white * Leasing, financing, and trade-in of your old trailer possible * Reference number for inquiries: 30505 * Remote diagnosis unit (RDÜ) with display option in the truck via EBS signal * Side marker lights with indicator activation * GVW: 14,400 kg, payload: 11,050 kg Codpfx Aeyvxg Ijl Hsrb * EBS 2S/2M * Galvanized floor, 5m x 2.42m x 0.5m, drop side panels, laser-welded, pendulum-mounted, fold-down and removable, prepared for later retrofitting of side wall extensions * Lockable compartment under the tipping bridge for access ramp * Incl. 1 pair of aluminum loading ramps, 8t/pair, 3.57m * Galvanized chassis, galvanized front wall * 4 UVV lashing rings LC 5,000daN at front and rear + 8 recessed and foldable lashing points LC 3,000daN in tipping floor (centered) * Hardwood excavator bucket rest * Two-step access in front of the front wall (galvanized) * Stepless height-adjustable drawbar, galvanized, 40mm towing eye * Wide tires 385/55R 19.5 (4x), parabolic springs * Mesh hooks, rear staking posts bolted, galvanized * Extension cables for rear side panel * Plastic toolbox on right chassis frame * LED lighting system 12 + 24 Volt * 2 LED reversing lights at the rear of the trailer * Hire-purchase price: for example, €549 per month over 60 months, no down payment, no residual value. An offer from our financing partner "FM LeasingPartner". Other terms with/without residual value or down payment available * Request an offer from us! * We are Müller-Mitteltal trading partners * Free delivery to your site possible with timely order! ----Our opening hours: Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside of these hours by appointment We speak German, English, Polish, and French. Whatsapp

Stanje: rabljeno, največja dovoljena obremenitev: 9.400 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 07/2020, dolžina tovornega prostora: 6.300 mm, širina tovornega prostora: 2.480 mm, Int.-št.: ZANDT Zelo dobro vzdrževana tandem šasija s kesonom ZANDT Cargo * TAT B 110 * Keson * Ojačano leseno dno * Težko nosilne pritrdilne tirnice * Dvoosna tandem os * Široke pnevmatike * Nastavljiva vlečna kljuka * Največja dovoljena masa 11.900 kg * Zelo dobro stanje Crjdpfxeymuz Uo Al Heb Možna je menjava staro za novo Financiranje od 3,99% Pridržujemo si pravico do napak in vmesne prodaje! Podatki v tem oglasu so neobvezujoči opisi in ne predstavljajo zagotovljenih lastnosti. Prodajalec ne prevzema nobene odgovornosti za tipkarske ali prenosne napake. Oprema iz oglasa se preveri posebej. Vsi podatki v oglasih so neobvezujoči! Dostava po celotni Nemčiji na zahtevo Delovni čas: ponedeljek do četrtek od 9:00-17:00, petek od 9:00-14:00 ali po dogovoru!

Stanje: rabljeno, največja dovoljena obremenitev: 9.400 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 07/2020, dolžina tovornega prostora: 6.300 mm, širina tovornega prostora: 2.480 mm, Int. št.: ZANDT zelo dobro vzdrževana tandem ploščadna prikolica ZANDT Cargo * TAT B 110 * ploščad * ojačan lesen pod * pritrdilne tirnice za težke tovore Cedpfxeymuz Io Al Herb * tandem z dvema osema * široke pnevmatike * nastavljivo vlečno oje * dovoljena skupna masa 11.900 kg * zelo dobro stanje Možnost menjave starega za novo Financiranje od 3,99 % Napake in vmesna prodaja pridržane! Podatki v tem oglasu so nezavezujoči opisi in ne veljajo kot zagotovljene lastnosti. Prodajalec ne prevzema odgovornosti za tipkarske napake ali napake pri prenosu podatkov. Oprema, navedena v oglasu, je treba posebej preveriti. Vsi podatki v oglasih so nezavezujoči! Dostava po celotni Nemčiji na zahtevo Delovni čas: ponedeljek do četrtek od 9:00 do 17:00 petek od 9:00 do 14:00 in po dogovoru!!!

Stanje: novo, največja dovoljena obremenitev: 30.740 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting/lowering system and RtR valve * Smard board for payload weighing * Warning sign kits, front and rear * Reflective contour tape on the sides and rear * Removable rotating beacon (rear) * LED lighting * Straight drawbar with 50 mm towing eye and infinitely adjustable height * Tool box made of powder-coated steel sheet and basket-type spare wheel holder, mounted right side * Front: closed single plastic mudguard * Rear: straight steel mudguards, each with spray suppression * Side underrun protection * Bogie platform extension by 520 mm with 45° corners, 3 integrated lockable storage compartments with lids * Chassis made of high-strength fine-grained steel Crsdpfsl Tik Njx Al Hsb * 50 mm softwood floor over bogie platform, 60 mm softwood on low-bed platform * Outer rails on ramps made of hardwood * 4 stake pockets per side (no stakes included); 2 t lashing possible at each * Load securing package: 2 lashing eyes (6.4 t) front left/right on main frame of bogie platform * 2 pairs of lashing rings (13.4 t) on outer frame front/rear per side; 4 pairs of lashing rings (10 t), swing-out and lowerable per side (front/rear) * All lashing points loadable in all directions and recessed into outer frame * 2 pairs of lashing rings (6.4 t) in excavator arm rest area * 8 pairs of galvanized folding outriggers for 3 m overall width (not at rear slope) * Extension planks stored left side in a storage box * Excavator arm rest above rear axle to end of rear slope, approx. 2,100 x 740 x 190 mm * Rear mechanical fall supports * Hydraulic folding ramps with hydraulically adjustable ramp tip, approx. 4,650 x 720 mm, incl. hydraulic lateral ramp adjustment & load-holding valve * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height loaded approx. 890 mm, +/-20 mm (incl. 860 mm approach slope) * Flow divider installed * Chassis, bogie, ramps, outriggers and mechanical fall supports hot-dip galvanized * Axles, drawbar, air reservoir and turntable in black finish * Tires: 235/75 R 17.5 * New vehicle, no initial registration, manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf, A7

Stanje: novo, največja dovoljena obremenitev: 30.740 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift/lowering system and RtR valve * Smard board for load weight determination * Warning sign packages front & rear * Reflective contour marking tapes on sides and rear * Rotating beacon (removable) at rear * LED lights * Straight drawbar with 50 mm towing eye and continuously adjustable height * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, right-hand side * Closed single plastic mudguards at front * Straight rear steel splash guards, each with spray suppression * Side underrun protection * Turntable platform front extension by 520 mm with 45° corners and 3 flush storage compartments with lids, lockable * Chassis made of high-strength fine-grained steel * Decking above turntable platform: 50 mm softwood, in low-bed platform: 60 mm softwood * Outer planks of access ramps: hardwood * Each side features 4 stake pockets (stakes not included), with simultaneous 2 t lashing points * Lashing package includes: 2 lashing rings 6.4 t, front left and right on main frame of turntable platform * On sides, front & rear, 2 pairs of 13.4 t lashing rings on outer frame; sides each with 4 pairs of 10 t lashing rings, pivoting & lowerable * Loadable in all directions, recessed in the outer frame * 2 pairs of 6.4 t lashing rings on the excavator stick rest area * 8 pairs of galvanized folding outriggers for 3 m overall width (not in the rear slope) * Extension planks stored left side in a stowage compartment * Excavator stick rest above rear axle to rear slope approx. 2,100 x 740 x 190 mm * Mechanical drop supports, rear * Hydraulic folding ramps with hydraulic tip section approx. 4,650 x 720 mm including lateral hydraulic ramp shift & load holding valve * Load area over turntable: approx. 2,990 x 2,520 mm Crjdpfx Aol Tphrel Hob * Rear load area: approx. 6,780 x 2,520 mm * Loading height loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm drive-on slope) * Flow divider installed * Chassis, turntable, ramps, outrigger arms, and mechanical rear supports hot-dip galvanized * Axles, drawbar, air reservoir, and turntable painted in a black tone * Tires: 235/75 R 17.5 * New vehicle, not previously registered, with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Flatbed: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded brake cylinders Crodpfx Aov D Tbkel Hsb * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lift and lowering system ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (therefore B-dimension approx. 8,080 mm) * 40 mm flange towing eye ---- Electric / Lighting: * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (activated by reverse gear) * 1 removable LED beacon (incl. holder) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning sign sets front and rear * Landing gear at the front * External folding support legs at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each, mounted to the left and right sides * Lateral underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading Platform: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable for 3 m container external width) and lockable, locking dimension retracted to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN compliant) with an absolute external width of 3,000 mm. ----Cargo Securing: * Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing force every 480 mm * Option to fit 3 t drop-in lashing rings every 600 mm - 5 x 3 t UVV lashing rings installed per side - * In each front and rear corner 1 x 6.3 t lashing ring (front directly behind the container locks in the wooden floor and rear in the end cross member) * Various holes in the front and rear cross member for 1.2 t lashing points ----Ramps: * 1 pair of aluminium slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred and tracked vehicles * Storage compartment from the rear, recessed under the loading platform in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air tanks, front landing gear, and flange towing eye painted in black ----Info: * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available from week 22/2026

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Flatbed: ----Braking system: * EBS (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lift and lowering system ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (thus B-dimension of approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin electrical connector * LED lighting system 12/24 V * 2 additional LED reversing lights at the rear (switched via reverse gear) * 1 removable LED beacon (incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning panel sets front and rear * Support windlass at the front * Outward folding support legs at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each left & right side * Side impact protection * Underrun protection * Plastic quarter mudguards ----Platform: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container external width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not according to DIN) for an absolute external width of 3,000 mm ----Load Securing: * Perforated outer frame, angled approx. 45 degrees, with 2 t lashing capacity every 480 mm Credpjv D Tbdjfx Al Heb * Optionally, installation of 3 t lashing shackles every 600 mm - each side equipped with 5 x 3 t UVV lashing shackles - * At each front and rear corner, 1 x 6.3 t lashing ring (front directly behind the container locks in the wood floor and rear in the end crossmember) * Various holes for 1.2 t lashing options in the front and rear crossmembers ----Ramps: * 1 pair of aluminium slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tyred and tracked vehicles * Rear accessible storage compartment underneath the loading platform, integrated in the chassis ----Painting: * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air tanks, front support windlass and flange towing eye painted in a shade of black ----Info: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery lead-time: * Available from CW 22/2026

Stanje: rabljeno, največja dovoljena obremenitev: 10.960 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 11/2024, naslednji pregled (TÜV): 03/2027, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.100 mm, skupna širina: 2.550 mm, Dolžina nakladalne površine: 5.000 mm Širina: 2.550 mm / Nakladalna širina ca. 2.500 mm Nakladalna višina: ca. 1.100 mm Dodatne informacije - Jeklo - Vroče cinkano - Aluminijaste naletne rampe - Predal za rampe - 500 mm stranske stranice, preklopne - Vzmeti stranskih stranic - Gigant osi - Pnevmatike 285/70R19,5 - Nastavljiv priklop po višini Cedpfx Aoytma Aol Horb - Podporna noga spredaj + zadaj - Plastična orodjarnica - Vstop spredaj

Stanje: novo, največja dovoljena obremenitev: 10.970 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, KA-TA-R 14.4 - LKW tandem trostrani kiper - Nosivost serijski cca: 11.050 kg - Povećanje ukupne dozvoljene mase na 14,4 t kod guma 285/70R19.5 - Unutrašnje dimenzije: 5.000 x 2.420 x 500 mm - Visina poda pod opterećenjem: 1.040 mm - 1 šasija sa zaštitom od podletanja, vruće pocinkovana - Lakiranje: osovine sa oprugama, vazdušni rezervoari itd. u crnoj boji - 3 para upuštenih i preklopnih veznih kuka u čeličnom podu, LC 3.000 daN - ABS 2S/2M, 24 volti - 2 podizne opruge za čelične bočne stranice visine 500 mm - 1 centralno zaključavanje levo i desno, njihajuće kod nepreklopnih bočnih stranica Dodatna oprema: 1 par UVV veznih prstenova upuštenih u čelični pod, umesto na čelični pod Crodpfjxmwiyjx Al Heb 1 čelični pod od Hardoxa 450, debljine 4 mm Podešavanje visine vučne ruke preko ugaonog prenosa sa ručnim pogonom umesto serijskog 1 par alu rampi bez ivica (8,0 t/par), 3.500 x 400 x 105 mm pogodno za pneumaticima i guseničarima Kutija za alat

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem | Low Loader | Platform | Trailer Available immediately | Reference number for inquiries: 11611 | Delivery to your address possible * We are happy to provide you with an individual offer * ---- * Gross weight: 14.4 t, Payload: 10.95 t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27 m x 2.47 m platform with galvanized 400 mm front wall * Excavator bucket rest made of hardwood, bolted to the front wall * Floor height unladen 930 mm / laden 870 mm * One-piece ramps with hot-dip galvanized grid surface, slip-resistant design, retractable down to approx. 20 mm. Secured by retaining bar and diagonal brace * Ramp lifter with upright, adjustable springs for easy one-man operation * 4 UVV drop lashings (LC 6300 daN) * Perforated outer frame (45°-bent with hole pattern for lashing equipment, lashing force per lashing point LC 2000 daN at a minimum spacing of 480 mm. Installation of drop lashings LC 3000 daN at approx. 600 mm spacing possible), closely spaced cross-stiffeners, high-ribbed front and rear closure with rear loading ramp, hot-dip galvanized * 10 UVV lashing rings LC 3000 daN retractable in the existing hole grid in the outer frame, additional * Additional lashing options via bore holes (Ø 50 mm, LC 1200 daN) in the front and rear crossmembers * Toolbox in front of the front wall * Side marker lights with indicator function * 50 mm thick softwood floor. Chassis hot-dip galvanized * Height-adjustable landing gear at the front, folding supports at the rear * Retrofitting of 2 container locks possible * Drawbar with 40 mm towing eye (hot-dip galvanized), height adjustable, 50 mm eye possible on request Crodoyndh Hopfx Al Heb * 1 removable LED warning light at the rear * ---- * Leasing, hire purchase, financing, trade-in possible * Example: 510 euros for 60 months’ term, no down payment, no final installment * ---- * Our opening hours: * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 Outside of business hours, viewings possible by appointment. We speak German, English, Polish, and French Leasing, financing, trade-in possible

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem Low Loader ? Platform ? Trailer Immediately available | Inquiry No.: 27678 | Delivery to your address possible * We are happy to provide you with an individual offer * ---- Cjdoyadz Rjpfx Al Hsrb * GVW: 14.4t, Payload: 10.95t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27m x 2.47m platform with galvanized front wall, 400mm high * Excavator bucket rest made of hardwood, bolted to the front wall * Deck height unladen 930mm / laden 870mm * One-piece ramps with hot-dip galvanized grid grating, anti-slip design, can be pushed together to approx. 20 mm, secured by retaining rods and diagonal supports * Ramp lift with vertically mounted, adjustable springs for easy single-person operation * 4 UVV drop lashing rings (LC 6300 daN) * Perforated outer frame (45° angled with hole pattern for lashing equipment, lashing force per point LC 2000 daN with a minimum spacing of 480 mm. Installation of drop lashing rings LC 3000 daN at approx. 600 mm intervals possible) with close cross profiling, high-webbed front and rear closures and rear drive-on slope, hot-dip galvanized * 10 UVV lashing rings LC 3000 daN, retractable into existing hole grid in outer frame, additionally * Further lashing points by drilled holes (Ø 50 mm, LC 1200 daN) in the front and rear crossmember * Toolbox in front of the bulkhead * Side marker lights with indicator function * Softwood floor, 50 mm thick. Chassis hot-dip galvanized * 2 container locks recessed in the front crossmember * Height-adjustable telescopic landing gear at the front, fold-down supports at the rear * Drawbar with 40 mm towing eye (hot-dip galvanized), height adjustable; 50 mm eye available on request * 1 removable LED warning beacon at the rear ---- * Leasing, hire-purchase, financing, trade-in possible * For example: 515 euros at 60 months term, no down payment, no final installment * ---- * Our opening hours * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 Outside opening hours available by appointment We speak German, English, Polish, French Leasing, financing, trade-in possible

Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating aggregate ----Drawbar / Drawbar Eye: * Drawbar adjustable in height by 300 mm – drawbar extension by 250 mm to 2,250 mm * 40 mm flanged drawbar eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED tail lights 12 / 24 V * LED rotating beacon (removable) at rear ----General Attachments: * Support winch in front * Externally mounted hot-dip galvanized folding supports at rear * Plastic toolbox approx. 858 x 500 x 500 mm, front right, outside at the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Preparation in front of front wall for retrofitting container locks * Bolted front wall made of smooth sheet metal * Sidewalls made of trapezoidal profile steel sheet, foldable with drop-side spring-assisted lifting device * Steel rear wall can be slid between the ramps – storage bracket for unused rear wall inside by the front wall * Rear stanchions bolted * Rear approach angle approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick and 270 mm wide rubber strips on the inside of ramps * 12 mm thick and 210 mm wide rubber strips on the approach slope and externally on the low-bed platform (from front wall to end sill) ----Load securing: Credpfx Aox Ipapol Hjb * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t drop lashing rings every 600 mm possible * 1 x 6.3 t lashing ring at each front and rear corner * Various drill holes in front wall and end sill for 1.2 t lashing options ----Ramps: * One-piece mech. grating ramps with spring system for one-man operation, approx. 2,750 x 870 mm (can be compressed to 20 mm) ----Paintwork: * Chassis, drawbar, front wall, tailgate, and ramps hot-dip galvanized * Axles, springs, air tank, and flanged drawbar eye painted black * Sidewalls painted RAL 9010 pure white ----Info: * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * Errors and prior sale excepted * New vehicle with manufacturer’s warranty ----Delivery time: Vehicle is immediately available