Müller-Mitteltal 11,9 To Tand. 3-Seitenkp./ Kombiklappe/ Rampen nakup rabljenega (55.081)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Mali oglas
Egestorf
860 km
Tristrani nagibni priklopnik
MÜLLER-MITTELTAL11,9 to., verst. Strongwände, Kombi- Heckklappe
Pokliči
Stanje: novo, največja dovoljena obremenitev: 8.410 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2025, * KA - TA - R 11.9
----Brakes:
* Wabco EBS (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalization unit
----Drawbar / Flange eye:
* Height-adjustable drawbar (up to 300 mm) with 40 mm flange eye
----Electrics / Lighting:
* Tyre pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required)
* 15-pin power connector
* LED lighting system 12 / 24 V
* 2 LED reversing lights at the rear (controlled via reverse gear)
----General Attachments:
* Mechanical BPW landing gear at front
* 2 mechanical fold-down support legs at rear
* Plastic toolbox approx. 750 x 350 x 300 mm mounted at the front, right side of the chassis
* Bolted underrun protection
* Plastic quarter mudguards
* Two-step access in front of the front wall on the left side
----Chassis:
* Chassis made of fine-grained steel
----Tipper Body:
* Net hooks at the mounting points of the central locking system and 2 on the front wall
Ledpfsxf Skvjx Ap Dern
* Steel pallet three-way tipper body with reinforced 600 mm "Strong" side walls
* Continuous side panels at the top with inner tube reinforcement (without central stanchions), foldable with tailgate spring assist
* Bolt-on rear corner posts
* Combination steel double-leaf rear door, two-wing, asymmetrically divided, swivels and lockable to 270°, not foldable, with additional swinging frame for automatic rear door opening during tipping
* Rear locking through galvanized rotary bar lock and central locking
* Deactivation function for automatic rear door function when tipping backwards with open double-leaf door
* Mounting rail at the rear for loading ramps
----Load Securing:
* Each corner: 1 x 5 t lashing ring, plus 4 x 3 t lashing eyes recessed in the outer frame on each side
* 4 mm sheet steel floor made of S 420 MC 4 fine-grained steel
----Ramps:
* 1 pair of aluminium drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair) suitable for rubber-tyred and tracked vehicles
* Lockable storage compartment under the loading area, recessed in the chassis, accessible from the rear
----Paintwork:
* Chassis, drawbar, tipper body, front wall, underrun protection, rear stanchions, rear support legs, and entry step hot-dip galvanized
* Side panels and tailgate painted in RAL 3003 ruby red
* Axles, springs, air tank, and landing gear painted in a black tone
----Info:
* Reinforced body with cargo securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to prior sale and errors
----Delivery Time:
* Immediately available ex Egestorf
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTAL14,4 to. Tand.- Tiefl., breite Rampe, Gummi
Pokliči
Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ - TA -R 14.4
----Brakes:
* EBS (Electronic Braking System)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating aggregate
----Drawbar / Drawbar Eye:
* Drawbar adjustable in height by 300 mm – drawbar extension by 250 mm to 2,250 mm
* 40 mm flanged drawbar eye
----Electrics / Lighting:
* Tire pressure monitoring with display capability in the truck via EBS signal (no truck-side installation required)
* 15-pin power connector
* LED tail lights 12 / 24 V
* LED rotating beacon (removable) at rear
----General Attachments:
* Support winch in front
* Externally mounted hot-dip galvanized folding supports at rear
* Plastic toolbox approx. 858 x 500 x 500 mm, front right, outside at the front wall
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* Preparation in front of front wall for retrofitting container locks
* Bolted front wall made of smooth sheet metal
* Sidewalls made of trapezoidal profile steel sheet, foldable with drop-side spring-assisted lifting device
* Steel rear wall can be slid between the ramps – storage bracket for unused rear wall inside by the front wall
* Rear stanchions bolted
* Rear approach angle approx. 860 mm
----Flooring:
* 50 mm softwood floor
* 12 mm thick and 270 mm wide rubber strips on the inside of ramps
* 12 mm thick and 210 mm wide rubber strips on the approach slope and externally on the low-bed platform (from front wall to end sill)
Lredsx Ipapjpfx Ap Don
----Load securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Installation of 3 t drop lashing rings every 600 mm possible
* 1 x 6.3 t lashing ring at each front and rear corner
* Various drill holes in front wall and end sill for 1.2 t lashing options
----Ramps:
* One-piece mech. grating ramps with spring system for one-man operation, approx. 2,750 x 870 mm (can be compressed to 20 mm)
----Paintwork:
* Chassis, drawbar, front wall, tailgate, and ramps hot-dip galvanized
* Axles, springs, air tank, and flanged drawbar eye painted black
* Sidewalls painted RAL 9010 pure white
----Info:
* --Reinforced and certified body according to EN 12642 XL incl. load securing certificate--
* Errors and prior sale excepted
* New vehicle with manufacturer’s warranty
----Delivery time:
Vehicle is immediately available
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTAL14,4 to. Tand.- Tiefl., breite Rampe, Gummi
Pokliči
Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * First inspection (ETÜ) - TA -R 14.4
Lrjdpjx Ipbaofx Ap Djn
----Brake System:
* EBS (Electronic Braking System)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with equalizing unit
----Drawbar / Flange Eye:
* Height-adjustable drawbar by approx. 300 mm - drawbar extension by 250 mm to 2,250 mm total length
* 40 mm flange-type towing eye
----Electrics / Lighting:
* Tire pressure monitoring with display option in the truck via EBS signal (without truck-side installation)
* 15-pin electrical connector
* LED rear lights 12 / 24 V
* Removable LED beacon at rear
----General Attachments:
* Landing leg at the front
* Externally mounted hot-dip galvanized folding supports at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm, externally mounted on the front right end wall
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Deck:
* Preparation in front of the bulkhead for later installation of container locks
* Bolted smooth steel bulkhead
* Foldable steel side walls with trapezoidal profile, with drop-side spring assist
* Removable steel rear wall, stowable inside at the front of the bulkhead when not in use
* Bolted rear stanchions
* Rear ramp bevel approx. 860 mm
----Flooring:
* 50 mm softwood flooring
* 12 mm thick and 270 mm wide rubber strips on the inside of the loading ramps
* 12 mm thick and 210 mm wide rubber strips on the ramp bevel and on the exterior of the low loader platform (from front bulkhead to rear cross member)
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Possible installation of 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each of the front and rear corners
* Various drillings in the front and rear cross members for 1.2 t lashing options
----Ramps:
* One-piece mechanical grating ramps with spring assistance for single-person operation, approx. 2,750 x 870 mm (collapsible to 20 mm thickness)
----Paint Finish:
* Chassis, drawbar, front wall, tailgate, and ramps hot-dip galvanized
* Axles, springs, air tanks, and flange eye painted in black
* Side walls painted in RAL 9010 pure white
----Information:
* Reinforced and certified superstructure according to EN 12642 XL, including load securing certificate
* Subject to errors and prior sale
* New vehicle with manufacturer’s warranty
----Delivery time:
Vehicle is immediately available ex Eggerstorf
Mali oglas
Stadum
1.044 km
Tristrani nagibni priklopnik
MÜLLER-MITTELTAL3-Seitenstahlkipper / Rampen / breite Reifen!
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 10.080 kg, skupna masa: 13.500 kg, konfiguracija osi: 2 osi, prva registracija: 08/2017, naslednji pregled (TÜV): 08/2026, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, prostornina tovornega prostora: 6 m³, Leto izdelave: 2017, Oprema: ABS, Stock št. 5820
Müller-Mitteltal 3-stranski tandem jekleni kiper priklopnik / aluminijaste rampe / pocinkovano podvozje / široke pnevmatike!
----
* Proizvajalec: Müller-Mitteltal
* Tip: KA-TA-R 13,5
* Prva registracija: 08/2017
* Skupna masa: 13.500 kg
* Lastna masa po prometnem dovoljenju: 3.420 kg
* Nosilnost: 10.080 kg
* Osi: 2 x Gigant / bobnaste zavore
* Vzmetenje: listnato vzmetenje
* Pnevmatike: 385/55 R 19.5 približno 50% na jeklenih platiščih
* Tehnični pregled: 08/2026
* EBS
* Barva: podvozje pocinkano, kiper nadgradnja modra
* Prostornina kiperske kadi: približno 6 m³ (5,00 m dolžina x 2,42 m širina x 0,50 m višina)
* izvlečne aluminijaste rampe
* vlečna kljuka s 50 mm ušesom, nastavljiva po višini
* kiper nadgradnja s 4 pari zložljivih pritrdilnih ušes v tleh
* nosilec za polno obremenitev spredaj
* dodatne zložljive opore zadaj
* predal za orodje iz nerjavnega jekla spredaj desno
* četrtinski blatnik
* certifikat za varovanje tovora
Lodpfx Apszdm S Ss Dern
* vozilo iz prve roke
Nemški priklopnik!! Nemški dokumenti!! Prva lastništvo!!
Opomba o morebitnih napakah v oglasu:
Kljub skrbni pripravi oglasa lahko pride do posameznih napak v besedilu ali podatkih. Ne prevzemamo odgovornosti za napake, spremembe ali vmesno prodajo. Vse informacije so brez garancije. Prosimo, da nas kontaktirate za preverjanje podrobnosti ali dodatna vprašanja.
Mali oglas
Alsdorf
835 km
Tristrani nagibni priklopnik
MÜLLER-MITTELTALKA-TA-R 11,9 Breitreifen, Alu-Rampen, LED
Pokliči
Stanje: novo, največja dovoljena obremenitev: 8.750 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, Reference number for enquiries: 31943-O
* NEW VEHICLE – soon available in your desired color.
Müller-Mitteltal KA-TA-R 11.9 Tandem Low-bed Three-way Tipper Trailer with Ramps
* Tyres: 385/55 R19.5 (4 units), BPW axles, parabolic springs, drum brakes
* GVW: 11,900 kg, payload: 8,750 kg
* Tyre pressure monitoring with in-cab display via EBS signal
* EBS instead of ABS, 24 volts
* EBS multi-voltage system for 24V and 12V vehicles (e.g., tractors)
* Side marker lights with indicator activation
* LED lighting system for 12V and 24V
Lsdpfszbfmkjx Ap Dsrn
* 2 additional LED reversing lights
* Floor galvanized, 5m x 2.42m, 0.5m side walls, laser-welded, swinging, folding, and removable
* Prepared for retrofitting sidewall extensions later
* Lockable compartment under the tipping body for the drive-on ramps
* Incl. aluminium ramps, 8t load capacity, 3.57m long, stowed in ramp compartment under tipper body
* Floor and front wall hot-dip galvanized
* 4 UVV lashing rings LC 5000daN front and rear + 8 recessed and foldable lashing eyes LC 3000daN evenly distributed in tipper floor
* Drawbar infinitely height-adjustable, hot-dip galvanized, 40mm towing eye
* Mesh hooks
* Bolt-on, galvanized rear stanchions
* Excavator bucket rest mounted on the front wall
* One plastic toolbox, mounted right-hand side of chassis frame
* Step in front of front wall
----
* We are Müller-Mitteltal authorized dealer
----
* Request a quote from us!
* e.g. from €545 net/month for 60 months, no down payment, no residual value. An offer from our financing partner FM LeasingPartner
----
Our opening hours:
Monday - Thursday: 08:00 - 17:00
Friday: 08:00 - 15:00
Outside opening hours, available by appointment
We speak German, English, Polish, and French
WhatsApp
Leasing, financing, and trade-in possible.
Mali oglas
Egestorf
860 km
Odvozna prikolica
MÜLLER-MITTELTAL14,4 to. Tand. Cont. Absetzanh. -feuerverzinkt-
Pokliči
Stanje: novo, največja dovoljena obremenitev: 12.200 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * TM-TA 14.4:
----Brakes:
* Wabco EBS braking system
* Emergency release device for spring-actuated cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Ring:
Lredpjpk Dyxefx Ap Dsn
* Height-adjustable, hot-dip galvanized drawbar with ±150 mm adjustment
* 40 mm flange towing eye
----Electrics / Lighting:
* 15-pin power connector
* LED tail lights
* RDÜ tire pressure monitoring system
----General Attachments:
* Jost landing gear at the front
* 2 x exterior drop-down support legs at the rear
* Enclosed single plastic mudguards
* Foldable A-sign at the rear
* Plastic underrun protection buffer
* Hot-dip galvanized front crash protection bar with integrated chain storage box, (W = 370 mm x D = 420 mm x H = 480 mm) left and right front
----Load Securing:
* 2 x 5.3 t UVV lashing rings per side for attaching tensioning elements
* Including 2 permanently mounted ratchet tensioners with chain box at the outer frame
* Compensating chain on both sides with eyelet and quick-shortener, special Y-version, 6.3 t
----Skip Stops:
* 2 repositionable skip stops for lateral centering of the skips
* Front skip stops with pendulum stop, adjustable in 4 positions
----Paintwork:
* Hot-dip galvanized chassis
* Axles, springs, air tanks and landing gear painted in black
----Info:
* Lashing force with load securing certificate
* Subject to errors and prior sale
* New vehicle with manufacturer's warranty
----Delivery Time:
* Available from approx. calendar week 38/2026
Mali oglas
Egestorf
860 km
Priklopnik z delovno ploščadjo
MÜLLER-MITTELTAL14,4 to. Plateau, Luft, 3 m. Cont.- Verriegelung
Pokliči
Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Platform Trailer:
----Brakes:
* EBS (Electronic Braking System)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t BPW axles
----Suspension:
* Air suspension with lifting and lowering device
----Drawbar / Flange Eye:
* Drawbar height-adjustable by 300 mm
* Drawbar shortened by approx. 200 mm to approx. 1,800 mm (results in a B-dimension of approx. 8,080 mm)
* 40 mm flange towing eye
----
Electrics / Lighting:
* 15-pin power connector
* LED lighting system 12 / 24 V
* 2 additional LED reverse lights at the rear (activated by reverse gear)
* 1 removable LED beacon (including bracket) at the rear
* TPMS (Tire Pressure Monitoring System)
----General Attachments:
* Mechanically adjustable 3 m warning panel sets at front and rear
* Support winch at front
Lrodjv D Tbkopfx Ap Don
* External folding supports at the rear
* Plastic toolboxes approx. 750 x 350 x 300 mm, one on each side left & right
* Side underrun protection
* Rear underrun protection
* Plastic quarter fenders
----Loading Area:
* 400 mm high bolted front wall
* 50 mm softwood floor
* 2 pairs of container locks (extendable for 3 m container external width) and lockable; locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN compliant) with a total external width of 3,000 mm
----Load Securing:
* Perforated outer frame approx. 45° bent with 2 t lashing force every 480 mm
* Installation of 3 t lashing brackets possible every 600 mm - 5 x 3 t UVV-lashing brackets mounted per side
* In each front and rear corner 1 x 6.3 t lashing ring (front directly behind the container locks in the wooden floor and rear in the end crossmember)
* Various drillings in front wall and end crossmember for 1.2 t lashing options
----Ramps:
* 1 pair of aluminium slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tired and tracked vehicles
* Storage compartment under the loading platform at the rear, integrated into the chassis
----Paintwork:
* ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized---
* Axles, air tanks, front support winch and flange towing eye painted in a shade of black
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from CW 39/2026
Mali oglas
Egestorf
860 km
Odvozna prikolica
MÜLLER-MITTELTAL14,4 to. Tand. Cont. Absetzanh. -feuerverzinkt-
Pokliči
Stanje: novo, največja dovoljena obremenitev: 12.200 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * TM-TA 14.4:
----Braking system:
* Wabco EBS brake system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating aggregate
----Drawbar / Flange eye:
* Height-adjustable, hot-dip galvanised drawbar +/- 150 mm
* 40 mm flange towing eye
----Electrics / Lighting:
* 15-pin power plug
Ledsl Thyqspfx Ap Dern
* LED tail lights
* RDÜ tyre pressure monitoring system
----General attachments:
* Jost landing gear at the front
* 2 x external drop supports at the rear
* Closed individual plastic mudguards
* Foldable "A" sign at the rear
* Plastic underride protection buffer
* Hot-dip galvanised underrun guard with integrated chain storage box (W=370 mm x D=420 mm x H=480 mm) front left & right
----Load securing:
* 2 x 5.3 t UVV lashing rings on each side for attaching tensioning elements
----Container stops:
* 2 removable container stops for lateral centring of the containers
* Front container stops with 4-position pivoting stops
----Paintwork:
* Hot-dip galvanised chassis
* Axles, springs, air tank and landing gear painted in black
----Information:
* Errors and subject to prior sale
* New vehicle with manufacturer's warranty
----Delivery time:
* Available from approx. week 38/2026
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTAL14,4 to. Plateau, Luft, 3 m. Cont.- Verriegelung
Pokliči
Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Flatbed:
----Brakes:
* EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t BPW axles
----Suspension:
* Air suspension with lift and lower function
----Drawbar / Towing Eye:
* Height-adjustable drawbar (adjustable by 300 mm)
* Drawbar shortened by approx. 200 mm to about 1,800 mm (resulting in a B-dimension of approx. 8,080 mm)
* 40 mm flange towing eye
Lredpfx Apev D Tbde Djn
----
Electrics / Lighting:
* 15-pin power connector
* LED lighting system 12 / 24 V
* 2 additional LED reversing lights at the rear (actuated via reverse gear)
* 1 removable LED beacon incl. bracket at the rear
* Tire Pressure Monitoring System (TPMS)
----General Attachments:
* Mechanically adjustable 3 m warning panel sets front and rear
* Landing leg at the front
* External fold-down supports at the rear
* Plastic toolboxes approx. 750 x 350 x 300 mm on each side left & right
* Side underrun protection
* Rear underrun protection
* Plastic quarter mudguards
----Loading Area:
* 400 mm high bolted front wall
* 50 mm softwood floor
* 2 pairs of container locks (extendable to 3 m outer container width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN-compliant) with an absolute outer width of 3,000 mm
----Load Securing:
* Perforated outer frame angled at approx. 45 degrees with 2 t lashing capacity every 480 mm
* Optional installation of 3 t recessed lashing rings every 600 mm – laterally, 5 x 3 t UVV-compliant lashing rings installed per side
* At the front and rear corners 1 x 6.3 t lashing ring each (front directly behind the container locks in the wooden floor and rear in the end cross member)
* Various holes in the front wall and end cross member for 1.2 t lashing options
----Ramps:
* 1 pair aluminum slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t per pair), suitable for rubber-tyred and tracked vehicles
* Rear storage compartment under the loading area, integrated into the chassis
----Paintwork:
* ---Chassis, drawbar, front wall, underrun protection, and rear support elements hot-dip galvanized---
* Axles, air tank, front landing leg, and flange towing eye painted in black
----Other information:
* Brand-new vehicle with manufacturer warranty
* Subject to errors and prior sale
----Delivery time:
* Available from approx. week 39/2026
Mali oglas
Egestorf
860 km
Priklopnik z delovno ploščadjo
MÜLLER-MITTELTAL3-Achs Plateau, luftgefedert, hydr. Rampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * PT 30 Profile:
----Braking System:
* EBS (Electronic Braking System)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 3 x 11 t Gigant axles
----Suspension:
* Air suspension with lifting and lowering function as well as Return-to-Ride (RtR) valve
----Drawbar:
Drawbar, 1,200 mm long with 40 mm draw eye and height adjustment via tension spring & turnbuckle
----Electrics / Lighting:
* Smart Board mounted on the trailer as an information tool (for axle load display – front and rear separately)
* Tire pressure monitoring system with display possibility in the truck via EBS signal, no installation required on the truck side
* 15-pin power connector
* LED lighting 12/24 V
* LED beacon (removable) at the rear
----General Attachments:
* Side underride protection
* Swivel supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages front and rear
* Front axle (FA) plastic quarter mudguards with spray protection
* Rear axle (RA) straight galvanized steel mudguards with spray protection
* Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, powder-coated black, mounted right side
* Box in rotating frame for accessories, with folding lid, 2 pcs. container locks permanently fitted (directly after the rotating frame platform)
* 2 galvanized steps on the rotating frame, left and right
----Low-loader Platform:
* ROBOT-welded anti-slip covering to the steel plate of the rotating frame platform (protruding weld beads)
----Load Securing (Load Securing Package consists of):
* 2 lashing eyes (13.4 t) front left & right at the front wall crossmember
* 1 pair of UVV lashing rings (13.4 t) at the front & rear, and 3 pairs UVV lashing rings (10 t) each side, pivotable and lowerable, loadable in all directions and recessed in the outer frame
* 3 stake pockets each side with simultaneous 2 t lashing capability
* Profifix lashing rail lengthwise in the center axis, in the flat area, for lashing up to LC 3000 daN
----Widening:
* 6 pairs of mechanical folding outriggers for 3 m total width (not on rear slope)
* Widening planks stored in the middle of the loading area
----Ramps:
* Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm
Lrjdjtplwijpfx Ap Dsn
* Mechanically adjustable sideways
* 4-way control block for future retrofitting of hydraulic ramp shifting
----Excavator Arm Rest:
* Excavator arm rest over rear axle, continuous up to the end crossmember (total length approx. 2,100 mm)
* 2 pairs of lashing eyes LC 6400 daN in the excavator arm rest, positioned laterally in the longitudinal frame
----Loading Height:
* Loaded approx. 910 mm +/- 20 mm air suspension
----Coating/Paintwork:
* Chassis, rotating frame, folding outriggers, fall supports, and drive-on ramps hot-dip galvanized
* Axles, slewing ring, air tanks, drawbar painted in a black tone
----Information:
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
----Delivery Time:
* Immediately available ex Egestorf
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTAL3-Achs Plateau, luftgefedert, hydr. Rampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, PT 30 Profile:
----Braking System:
* EBS (electronic braking system)
* Emergency release mechanism for spring-actuated cylinders
* Drum brakes
----Axle:
* 3 x 11 t Gigant axles
----Suspension:
* Air suspension with lifting and lowering system, including RtR valve
----Drawbar:
* Drawbar, 1,200 mm long, with 40 mm towing eye and height adjustment via traction spring & turnbuckle
----Electrical / Lighting:
* Smart-Board information system mounted on the trailer (for axle load indication – separate front and rear display)
* Tire pressure monitoring with display capability in the truck via EBS signal, no truck-side installation required
* 15-pin power connector
* LED lighting 12 / 24 V
* Removable LED beacon at rear
----General Attachments:
* Side underrun protection
* Swing-out supports at the rear of the chassis frame
* Mechanically adjustable warning board sets front and rear
* Front axle plastic quarter mudguards with spray protection
* Rear axle straight galvanized steel mud skirts with spray protection
* Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, black powder-coated, mounted right side
* Compartment in the bogie for accessories, with folding lid and 2 fixed container locks (directly behind the bogie platform)
* 2 galvanized steps on the bogie, left and right
----Low Loader Platform:
* Robot-welded non-slip overlay on the steel plate of the bogie platform (protruding weld seams)
----Load Securing (La-Si package consisting of):
* 2 lashing eyes (13.4 t) front left & right on front bulkhead carrier
* 1 pair of UVV lashing rings at front & rear (13.4 t) and 3 pairs of UVV lashing rings on each side (10 t), pivotable and lowerable, loadable in all directions, recessed in outer frame
* 3 stake pockets on each side, each with 2 t lashing capacity
* Profifix lashing rail in longitudinal axis, centered in flat area, for lashing up to LC 3000 daN
----Widening:
* 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear taper)
* Widening planks stored in the centre of the loading platform
----Ramps:
* Hydraulic one-piece drive-on ramps, approx. 3,000 x 720 mm
* Mechanically adjustable laterally
* 4-way control block for future retrofit of hydraulic ramp lateral adjustment
----Excavator Arm Rest:
* Excavator arm rest above rear axle, extending to the rear end crossmember (total length approx. 2,100 mm)
* 2 pairs of lashing eyes LC 6400 daN in the excavator arm rest, located laterally in the main longitudinal frame
Lodpsxptn Rjfx Ap Dorn
----Loading Height:
* Loaded approx. 910 mm +/- 20 mm (air suspension)
----Paintwork:
* Chassis, bogie, folding outriggers, drop-down supports and ramps hot-dip galvanized
* Axles, slewing ring, air tanks, and drawbar painted in black
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Immediately available ex Egestorf
Mali oglas
Egestorf
860 km
Priklopnik z delovno ploščadjo
MÜLLER-MITTELTALT4 40,0 , Agrar, hydr. Rampen,3 m. Paket
Pokliči
Stanje: novo, največja dovoljena obremenitev: 31.630 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T 4:
* EBS (Electronic Braking System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 4 x 11 t Gigant axles
* Parabolic springs
* Mechanical axle compensation front and rear
* Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required
* Warning plate sets front & rear
Lrjdpfx Aporczm Ds Den
* Contour tape on sides and rear, reflective
* EBS multi-voltage system for 12 & 24 V electrical systems
* Removable LED beacon rear
* 24 V - 15-pin and additional 12 V - 7+4 pin power cable
* Extended connection cables for agricultural and forestry tractors
* LED lighting
* Straight drawbar with 40 mm towing eye, continuously height-adjustable
* Powder-coated steel toolbox and spare wheel holder, basket design, right side
* Front closed single plastic mudguards
* Rear straight steel mudflaps, each with spray suppression (anti-spray)
* Side underrun protection
* Extended offset bend by 500 mm to the front
* Turntable platform extension at the front by 520 mm with 45° corners and 3 integrated lockable storage compartments with covers
* Chassis made from high-strength fine-grained steel
* Decking above turntable platform from 50 mm softwood and on low loader platform from 60 mm softwood
* Outer planks of loading ramps made from 50 mm bamboo wood
* Four stake pockets per side (but no stakes included), each with a 2 t lashing point
* Load securing package comprising: 2 lashing eyes (6.4 t) front left and right on the main frame of the turntable platform; front and rear, one pair of lashing rings (13.4 t) each on outer frame; four pairs of swivel and lowerable lashing rings (10 t) per side, loadable in all directions and integrated in the outer frame; two pairs of lashing rings (6.4 t) per side in excavator stick recess; eight pairs of galvanized folding outriggers for 3 m total width (not on the rear slope)
* Widening planks stored on the left side in stowage compartment
* Excavator stick recess above rear axle up to end of approach slope, approx. 2,300 x 740 x 190 mm
* Mechanical drop supports rear
* Hydraulic, hot-dip galvanized loading ramps approx. 3,000 x 720 mm
* Hydraulic lateral ramp movement on slide pipe from ramp shaft
* Loading area above fifth wheel: approx. 2,990 x 2,520 mm
* Rear loading area: approx. 6,280 x 2,520 mm
* Loaded deck height approx. 860 mm (including 860 mm approach slope)
* Chassis, turntable, loading ramps and mechanical folding supports rear hot-dip galvanized
* Axles, springs, air tanks and turntable painted in black
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Available immediately ex Egestorf
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTALT4 40,0 , Agrar, hydr. Rampen,3 m. Paket
Pokliči
Stanje: novo, največja dovoljena obremenitev: 31.630 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T 4:
* EBS (Elektronisches Bremssystem)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 4 x 11 t Gigant axles
* Parabolic springs
* Mechanical axle compensation front and rear
* Tire pressure monitoring with display option in the truck via EBS signal - no truck-side installation required
* Warning sign packages, front and rear
* Reflective contour tape on sides and rear
* EBS multi-voltage system for 12 & 24 V electrics
* Removable LED beacon at the rear
* 24 V 15-pin as well as additional 12 V 7+4-pin power cable
* Extended connection cables for agricultural and forestry tractors
* LED lighting
* Straight drawbar with 40 mm towing eye and infinitely adjustable height
* Tool box made of powder-coated sheet steel and spare wheel holder in basket design on right side
* Enclosed single plastic mudguards at the front
* Straight steel mud flaps at the rear each with splash protection (spray suppression)
* Side underrun protection
* Extended offset cranking by 500 mm forward
* Kingpin platform extension by 520 mm with 45° angled corners and 3 recessed lockable storage compartments with lid
Lrodsl Th Evjpfx Ap Den
* Chassis made from high-strength fine-grained steel
* Flooring over turntable platform made of 50 mm and in low-bed platform made of 60 mm softwood
* Outer boards of the drive-on ramps made of 50 mm bamboo wood
* Four stake pockets per side (stakes not included) with integrated 2 t lashing point
* Load securing package (Lasi package) including: 2 lashing eyes (6.4 t) front left/right on the main frame of the turntable platform; on both sides, front and rear, 1 pair of 13.4 t lashing rings on the outer frame, 4 pairs per side of 10 t swivel and drop lashing rings, loadable in all directions and integrated into the outer frame; 2 pairs of 6.4 t lashing rings per side in the excavator stick tray; 8 pairs of galvanized folding extensions for total width of 3 m (not at the rear angled section)
* Side extension planks stored on the left in a compartment
* Excavator stick rest above rear axle up to the end of approach slope, approx. 2,300 x 740 x 190 mm
* Mechanical drop supports at rear
* Hydraulic, hot-dip galvanized drive-on ramps approx. 3,000 x 720 mm
* Hydraulic side ramp shifting on sliding tube from ramp axle
* Loading area above kingpin: approx. 2,990 x 2,520 mm
* Rear loading area: approx. 6,280 x 2,520 mm
* Loaded platform height approx. 860 mm (incl. 860 mm approach slope)
* Chassis, kingpin platform, drive-on ramps, mechanical folding supports at rear hot-dip galvanized
* Axles, springs, air tanks, and kingpin painted in black tone
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Immediately available ex Egestorf
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTAL14,4 to Tand- Tiefl mit 2- Seitenkipper
Pokliči
Stanje: novo, največja dovoljena obremenitev: 10.400 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * ETK-TA-R 14.4:
----Brakes:
* EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axle:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalizer assembly
----Drawbar / Flange-Type Towing Eye:
* Height-adjustable drawbar by 300 mm with 40 mm flange towing eye
----Electrics / Lighting:
* Tire pressure monitoring with display capability in the truck via EBS signal, no truck-side installation required
* 15-pin power connector
* LED tail lights
----General Attachments:
* Mechanical landing gear at the front
* Two mechanical folding support legs at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side
* Bolted underrun protection
Ledotr Sucspfx Ap Dorn
* Plastic quarter mudguards
----Chassis:
* Main frame made of fine-grain steel
----Tipper Platform:
* Mesh hooks on sides and rear located at the central locking mounts, plus 2 on the front wall
* Steel pallet two-way tipping body, front wall fixed, made of smooth plate; continuous collapsible sidewalls (without center posts), with drop side spring lifters and manual central locking for tilting
* Rear stanchions bolted
* Steel rear wall slid in front of the ramps
* Each corner with 1 x 5 t lashing point; 4 x 3 t lashing rings recessed into the outer frame on each side
* 4 mm floor made of fine-grain steel
----Ramps:
* Two-piece mechanical grating drive-up ramps with aluminium tip section 2,150 + 1,300 mm x 600 mm (can be slid together manually up to 80 mm)
----Paintwork:
* Chassis, drawbar, rear stanchions, underrun protection, mechanical stabilizer legs, and ramps hot-dip galvanized
* Axles, springs, air tanks, towing eye, and landing gear painted in black
* Sidewalls and platform in RAL 9010 pure white
* Paint finish of sidewalls and tipper platform available in RAL color of choice at extra charge
----Information:
* New vehicle with manufacturer warranty
* Subject to prior sale and errors
----Delivery time:
* Available from calendar week 07/2026
Mali oglas
Egestorf
860 km
Tristrani nagibni priklopnik
MÜLLER-MITTELTAL14,4 to Tand- Tiefl mit 2- Seitenkipper
Pokliči
Stanje: novo, največja dovoljena obremenitev: 10.400 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * ETK-TA-R 14.4:
----Brakes:
* EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axle:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalizer assembly
----Drawbar / Flange-Type Towing Eye:
Lrodotr St Uspfx Ap Djn
* Height-adjustable drawbar by 300 mm with 40 mm flange towing eye
----Electrics / Lighting:
* Tire pressure monitoring with display capability in the truck via EBS signal, no truck-side installation required
* 15-pin power connector
* LED tail lights
----General Attachments:
* Mechanical landing gear at the front
* Two mechanical folding support legs at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side
* Bolted underrun protection
* Plastic quarter mudguards
----Chassis:
* Main frame made of fine-grain steel
----Tipper Platform:
* Mesh hooks on sides and rear located at the central locking mounts, plus 2 on the front wall
* Steel pallet two-way tipping body, front wall fixed, made of smooth plate; continuous collapsible sidewalls (without center posts), with drop side spring lifters and manual central locking for tilting
* Rear stanchions bolted
* Steel rear wall slid in front of the ramps
* Each corner with 1 x 5 t lashing point; 4 x 3 t lashing rings recessed into the outer frame on each side
* 4 mm floor made of fine-grain steel
----Ramps:
* Two-piece mechanical grating drive-up ramps with aluminium tip section 2,150 + 1,300 mm x 600 mm (can be slid together manually up to 80 mm)
----Paintwork:
* Chassis, drawbar, rear stanchions, underrun protection, mechanical stabilizer legs, and ramps hot-dip galvanized
* Axles, springs, air tanks, towing eye, and landing gear painted in black
* Sidewalls and platform in RAL 9010 pure white
* Paint finish of sidewalls and tipper platform available in RAL color of choice at extra charge
----Information:
* New vehicle with manufacturer warranty
* Subject to prior sale and errors
----Delivery time:
* Available from calendar week 07/2026
Mali oglas
Egestorf
860 km
Kiper prikolica skip
Müller-Mitteltal14,4 to. Tand. Cont. Absetzanh. -feuerv
Pokliči
Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 2.140 kg, največja dovoljena obremenitev: 12.260 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, vzmetenje: jeklo, velikost pnevmatike: 285/ 70 R 19,5, medosna razdalja: 1.140 mm, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, - TM-TA 14.4:
- incl. 2 ratchet tensioners permanently mounted on the outer frame with chain box, each side with eyelet and quick shortener, Y-special design, 6.3 t
- Tension force with load securing certificate
- Wabco EBS
- RDÜ tire pressure monitoring system
- Emergency release device for spring actuators
- Drum brakes
- 2 x 7 t Gigant axles
- Parabolic springs with equalizing unit
- Jost landing gear at the front
- 2 external drop-down support legs at the rear
- Height-adjustable, hot-dip galvanized drawbar +/- 150 mm
- Hot-dip galvanized chassis
- 15-pin power connector
- LED tail lights
- Closed single plastic mudguards
- Folding A-sign at the rear
- Plastic collision protection buffers on the underride guard
- Hot-dip galvanized underride protection with integrated chain storage boxes (W=370 mm x D=420 mm x H=480 mm) front left & right
Lsdpfx Asxuhy Ejp Dern
- 2 repositionable skip stops for lateral centering of skips
- Skip stops at the front with pendulum stops, insertable in 4 positions
- On each side, 2 x 5.3 t UVV lashing rings for attaching tie-down elements
- Axles, springs, air tanks, and landing gear painted in black
- Subject to errors and prior sale
- New vehicle with manufacturer’s warranty
- Available from week 05/2026
Mali oglas
Egestorf
860 km
Kiper prikolica skip
Müller-Mitteltal14,4 to. Tand. Cont. Absetzanh. -feuerv
Pokliči
Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 2.140 kg, največja dovoljena obremenitev: 12.260 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 285/ 70 R 19,5, medosna razdalja: 1.140 mm, Leto izdelave: 2026, - TM-TA 14.4:
Lredpfsxu Hplex Ap Dsn
- Wabco EBS (Electronic Braking System)
- RDÜ Tire Monitoring System
- Emergency release device for spring brake cylinders
- Drum brakes
- 2 x 7-ton Gigant axles
- Parabolic springs with compensation unit
- Jost landing gear at the front, 2 x external drop-down supports at the rear
- Height-adjustable +/- 150 mm hot-dip galvanized drawbar
- Hot-dip galvanized chassis
- 15-pin power connector
- LED tail lights
- Enclosed single plastic mudguards
- Foldable A-sign at the rear
- Plastic impact bumpers on underrun protection
- Hot-dip galvanized underrun protection with integrated chain compartment B = 370 mm x D = 420 mm x H = 480 mm, front left & right
- 2 repositionable skip stops for lateral centering of the skips
- Front skip stops with 4-position swing-type bolts
- Each side with 2 x 5.3-ton UVV lashing rings for attaching tensioning devices
- Axles, springs, air tanks, and landing gear painted in black
- Subject to errors and prior sale
- New vehicle with manufacturer's warranty
- Available from CW 05 / 2026
Mali oglas
Reutlingen
508 km
Prikolica z nizko platformo
MÜLLER-MITTELTALTandem Anhänger mit Rampen
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 4.500 kg, skupna masa: 6.500 kg, konfiguracija osi: 2 osi, prva registracija: 07/1979, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 1.900 mm, višina nakladalnega prostora: 380 mm, skupna širina: 2.500 mm, skupna višina: 3.000 mm, Leto izdelave: 1979,
Mali oglas
Wiedemar
626 km
Drugo
Müller-MitteltalTandem-Tieflader Anhänger ETS-TA-B 11,9
Pokliči
Stanje: rabljeno, prva registracija: 01/2023, voznikova kabina: drugo, vrsta prenosa: drugo, Leto izdelave: 2023, Ostalo:
* Možen je odkup in zamenjava vozil ter strojev.
Lrjdjzcfz Dopfx Ap Don
* Prodajna cena ne vključuje prevoza in prenosa.
* Brez odgovornosti za tiskarske in pisne napake.
* Pridržujemo si pravico do napak, sprememb in medčasne prodaje.
* Ponudba ni zavezujoča.
* Fotografije so lahko zgolj simbolične. Cena velja za trenutno stanje.
* Vse navedbe brez garancije.
Mali oglas
Bovenden
710 km
Odprta prikolica s ponjavo
Müller-MitteltalETUE-TA-ER 11,9, Verzinkt, Auffahrrampen
Pokliči
Stanje: rabljeno, lastna masa: 2.980 kg, največja dovoljena obremenitev: 8.920 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 01/2016, naslednji pregled (TÜV): 05/2027, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 930 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, medosna razdalja: 990 mm, barva: srebrn, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, 2 osi, BPW osi, tandem, zračno vzmetenje, ABS (protiblokirni sistem), pritrdilne ušesca, možnost namestitve naletnih ramp, podpora spredaj, podpora zadaj, stranska aluminijasta zaščita, shranjevalna škatla, nastavljiva vlečna kljuka po višini. Medosna razdalja: 990 mm. Nadgradnja: tandem keson s pogonskimi rampami, 2 x BPW osi, bobnaste zavore, pocinkan okvir, naletne rampe za doplačilo 1.000 €! Višina nakladanja približno 930 mm. PODATKI O DODATNI OPREMI SO BREZ JAMSTVA, pridržujemo si pravico do sprememb, vmesne prodaje in napak.
Ledpfey Tpwxox Ap Dorn
Mali oglas
Bovenden
710 km
Prikolica z nizko platformo
Müller-MitteltalETUE-TA-ER 11,9, Verzinkt, Auffahrrampen
Pokliči
Stanje: rabljeno, lastna masa: 2.980 kg, največja dovoljena obremenitev: 8.920 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 01/2016, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 930 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, medosna razdalja: 990 mm, barva: srebrn, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, 2 osi, BPW osi, tandem, zračno vzmetenje, ABS (protiblokirni sistem), pritrdilne ušeske, možne naletne rampe, sprednja opora, zadnja opora, stranska aluminijasta zaščita, shranjevalna skrinja, nastavljiva vlečna ruda po višini
Medosna razdalja: 990 mm
Nadgradnja: Tandem kesonska prikolica z naletnimi rampami, 2x BPW os, bobnaste zavore, pocinkan okvir, naletne rampe za doplačilo 1.000 EUR, trenutno 10,9 t.
Ledjy Tpw Eopfx Ap Djrn
Višina nakladanja cca. 930 mm
Dodatna oprema brez garancije, spremembe, vmesna prodaja in napake so pridržane!
Znak zaupanja
Prodajalci, certificirani pri TruckScout24

Mali oglas
Bovenden
710 km
Prikolica z nizko platformo
Müller-MitteltalT 40, Verbr. auf 3m, hydr. Rampen
Pokliči
Stanje: rabljeno, lastna masa: 8.800 kg, največja dovoljena obremenitev: 31.200 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/1996, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.510 mm, višina nakladalnega prostora: 1 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, barva: rdeča, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Lokacija vozila: Bovenden, 4 osi, vrtljiva gred, listnato vzmetenje, razširljiv do 3 m, pritrdilna ušesa, dvo-delne nakladalne rampe, hidravlične rampe, zadnja podpora, stranska aluminijasta zaščita, dvojne pnevmatike, škatla za orodje. Nadgradnja: 4-osna nizkopodna prikolica s hidravličnimi dvodelnimi rampami. Višina nakladanja cca 900 mm. 4x SAF osi 10t, bobnaste zavore, vlečno uho 40 in 50 mm! Dolžina zgornje ploščadi cca 2900 mm! Dolžina spodnje ploščadi cca 7100 mm! PODATKI O DODATNI OPREMI BREZ GARANCIJE, spremembe, vmesna prodaja in napake pridržane!
Lsdpfx Apoywvhre Dorn
Mali oglas
Peine
770 km
Prikolica z nizko platformo
MÜLLER-MITTELTALTandemtieflader ETUE-TA-R 11,9 Tiefladeranhänger
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 5.900 kg, skupna masa: 9.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2020, dolžina tovornega prostora: 5.370 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, prostornina tovornega prostora: 5 m³, Oprema: ABS, * ABS
* 5-komorna zadnja svetla
* Podesivi vučni uređaj po visini
Lrodpfsyncyhox Ap Don
* Gigant osovine
* Prednji oslonac na navijanje
----Nadgradnja: Niskopodni prikolica, približna visina utovara 870 mm, zadnji deo zakošen, visina uspona približno 780 mm, opružno rasterećene čelične stranice levo i desno, drveno dno, prstenovi i ušice za vezivanje. Opružno rasterećene i bočno pomične rampe za uspon sa vatrootpornim i protivkliznim rešetkastim prečkama od pocinkovanog čelika (dužina cca 2.600 mm), automatska zadnja podrška povezana s upravljanjem rampama, plastična kutija za alat ispred prednjeg zida. Šasija/prednji zid/vučno vratilo/zadnji zid/rampe i stubići pocinkovani.
Prodaja isključivo pravnim licima. KOD IZVOZA SE PLAĆA SAMO CENA BEZ PDV-A!!!!! SVE INFORMACIJE BEZ GARANCIJE, POSEBNO OPREMA I DODACI. Osnov za sve kupoprodajne ugovore, fakture, profakture, narudžbine i prodajne razgovore su naši Opšti uslovi poslovanja (vidi Impressum).
Mali oglas
Egestorf
860 km
Priklopnik z delovno ploščadjo
MÜLLER-MITTELTAL14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-R 14.4
----Brake System:
* EBS electronic braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Air suspension
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm up to 2,250 mm
* 40 mm flange towing eye
----Lighting / Electrical:
* TPMS (Tire Pressure Monitoring System)
* LED tail lights 12 / 24 V
* 15-pin power connector
Lrodpfx Apeq Dyvyo Dsn
----General Attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox mounted externally at the front right on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* Preparation in front of the bulkhead for retrofitting container locks
* Bolted smooth sheet metal bulkhead
* Trapezoidal-profiled, fold-down steel side walls with drop-side spring assists
* Steel rear wall, can be stowed between the ramp holders when not in use, inside in front of the bulkhead
* Bolted rear stanchions
* Rear drive-on slope approx. 860 mm
----Load Securing:
* Perforated outer frame, edged at approx. 45 degrees with 2 t lashing capacity every 480 mm
* Installation of 3 t fold-down lashing rings possible every 600 mm
* 1 x 6.3 t lashing ring at each front and rear corner
* Various holes for 1.2 t lashing options in bulkhead and rear crossmember
----Ramps:
* One-piece mechanical grating drive-up ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (collapsible down to 20 mm)
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, bulkhead, rear wall, tailgate, and drive-up ramps
* Side wall color in RAL 9010 pure white
* Painting of side walls in any RAL color available at extra cost
----Info:
* — Reinforced and certified body according to EN 12642 XL including load securing certificate —
* New vehicle with manufacturer warranty
* Errors and prior sale excepted
----Delivery time:
* Immediately available ex Egestorf
Mali oglas
Egestorf
860 km
Priklopnik z delovno ploščadjo
MÜLLER-MITTELTAL14,4 to. Tiefl. , luftgefedert - Einschubrampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 10.360 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 14.4:
----Brakes:
* Electronic Brake System (EBS)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
Lrodpfopk D Dqex Ap Don
* Gigant axles
----Suspension:
* Air suspension with lift and lower facility
----Drawbar / Flange Eye:
* Drawbar height adjustable by approx. 300 mm
* 40 mm flange drawbar eye
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System with in-cab display via EBS signal; no truck-side installation required)
* LED lighting system
* 15-pin power connector
----General Attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding support legs at the rear
* Plastic toolbox, front right, mounted outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Deck:
* 50 mm softwood flooring
* Provision for retrofitting 20" container locks at front and rear
* Bolted bulkhead made of smooth sheet steel
* Fold-down side walls, trapezoidal profile, with drop-side spring assists
* Bolted, hot-dip galvanized rear stanchions
----Load Securing:
* Outer frame with holes, approx. 45° angled, 2 t lashing capacity every 480 mm
* Option to install 3 t recessed lashing rings every 600 mm
* Each of the front and rear corners fitted with 1 x 6.3 t lashing ring
* Various holes in front and rear cross members for 1.2 t lashing options
----Ramps:
* 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for pneumatic and tracked vehicles; stowed at the rear in a compartment integrated below the deck in the chassis
----Paintwork:
* Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall
* Vehicle fully hot-dip galvanized
----Information:
* New vehicle with manufacturer’s warranty
* Subject to error and prior sale
----Delivery Time:
* Available immediately ex Egestorf
Olajšamo vam iskanje: "müller-mitteltal 11,9 to tand. 3-seitenkp./ kombiklappe/ rampen"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.



































































































































































































































































































































































































































































































