Faymonville Max Trailer 3-A-S-Hyd.ladebo.-Hyd.rampen nakup rabljenega (69.778)

Stanje: rabljeno, številka stroja/vozila: ***YAMT13XX6K0104043, konfiguracija osi: 3 osi, prva registracija: 01/2019, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 3.410 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: drugo, Leto izdelave: 2019, Chassis Chassis height: 87 cm Kingpin / Fifth wheel diameter: 2 inches Height of kingpin / drawbar: 120 cm Special transport 2-piece road plates: ✓ Hydraulic ramps: ✓ Loading deck length: 930 cm Dodou H D R Eepfx Aqqewa Ramp length: 395 cm Gooseneck length: 415 cm Low loader: ✓ Maximum width: 300 cm (25 cm per side) Max. length: 1380 cm Extendable: ✓ Tank Fuel: ✓ = Further Information = Axle configuration Tyre size: 235/75 R17.5 Axle brand: Saf Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin tyres; Tyre tread left outer: 60%; Tyre tread right outer: 60% Axle 2: Twin tyres; Tyre tread left outer: 20%; Tyre tread right outer: 30% Axle 3: Twin tyres; Steering; Tyre tread left outer: 55%; Tyre tread right outer: 50% Weights Unladen weight: 10,040 kg Payload: 30,960 kg Gross vehicle weight: 41,000 kg Functional Body make: Faymonville Loading platform height: 87 cm Identification Registration number: C505325 = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Stanje: rabljeno, Leto izdelave: 2018, Faymonville Maxtrailer F-S43-1AAF. Letnik: 2018. 9-tonske osi SAF. Teža: 9961 kg. Največja dovoljena teža: 45.000 kg. Nosilnost čepne prikolice: 18.000 kg. Servo volan za 3 krmiljene osi. 7,5 metra, raztegljiva. Zračno vzmetenje. Orodjarske omare RVS. Radijski daljinski upravljalnik. 1. dvižna os. EBA ABS ALB. Dimenzije nosilne površine: D: 13.550 mm. Š: 2480 mm. V: 1400 mm. Dodpfxjzn Nf Nj Aqqswa V: Aluminijaste plošče: 600 mm. Pnevmatike: 385/65R22,5, 70 %. Številka: 513. Splošni pogoji poslovanja podjetja Heinhuis veljajo za vse oglase, ponudbe in cenitve podjetja Heinhuis, vse pogodbe, sklenjene s podjetjem Heinhuis, in pogajanja, ki jim predhodijo. S kakršnim koli odgovorom potrjujete veljavnost splošnih pogojev poslovanja podjetja Heinhuis in izjavljate, da ste se seznanili s temi splošnimi pogoji poslovanja. Naše cene so izvozne cene brez davka. = Dodatne informacije = Letnik: 2018 Lastna teža: 9.961 kg Nosilnost: 35.039 kg Dovoljena skupna masa: 45.000 kg Raztegljiva nadstavba: Da = Informacije o podjetju = Za več informacij:

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 07/2023, skupna širina: 2.550 mm, skupna višina: 900 mm, Leto izdelave: 2023, Zadnja os 1: Dvojna montaža; Profil pnevmatik levo znotraj: 70%; Profil pnevmatik levo zunaj: 70%; Profil pnevmatik desno znotraj: 70%; Profil pnevmatik desno zunaj: 70%. Zadnja os 2: Dvojna montaža; Profil pnevmatik levo znotraj: 50%; Profil pnevmatik levo zunaj: 50%; Profil pnevmatik desno znotraj: 50%; Profil pnevmatik desno zunaj: 50%. Zadnja os 3: Dvojna montaža; Krmiljena; Profil pnevmatik levo znotraj: 80%; Profil pnevmatik levo zunaj: 80%; Profil pnevmatik desno znotraj: 80%; Profil pnevmatik desno zunaj: 80%. Lastna teža: 9.728 kg Nosilnost: 39.772 kg Skupna dovoljena masa: 45.000 kg Registrska številka: 018502 Dodpezbaq Rofx Aqqswa Skupna dolžina: 1.260 cm Raztegljiva dolžina: 450 cm Ležišče: 840 cm

Stanje: rabljeno, največja dovoljena obremenitev: 49.900 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2020, naslednji pregled (TÜV): 01/2027, with air suspension, hydromechanical forced steering, single extendable loading deck, wheel recess, with rear chamfer and loading ramps Dimension B 11,300 mm Unladen weight 15,100 kg STZ-L Gooseneck - robust steel welded construction - formed loading area 3,900 x 2,480 mm - hydromechanical forced steering (dual-circuit steering) - ball-bearing turntable saddle plate with replaceable 2" king pin and adjustable steering wedge - mechanical landing gear at the front Loading Platform - single telescopic, designed as an outer-inner tube construction with a fixed 300 mm section at the front - 300 mm sliding table on the inner tube, movable and lockable - locking of the extension stages via spring-loaded cylinders and conical pins - 1 pair of wheel recesses behind the 1st axle, depth 410 mm Chassis - 4-axle air-suspended chassis -1st axle is liftable and steered - SAF axle assembly, including three hydromechanically forced steered stub axles - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Raise/lower valve as standard for lowering to a minimum of 805 mm, or raising to a maximum of 1,050 mm - Loading height 860 mm - Excavator boom recess 3,850 mm long, 750 mm wide - Wheel recess behind gooseneck 410 mm deep - Wheel recess behind the 1st axle 410 mm deep Rear End - Design: "500 mm rear chamfer" - Short 1,240 mm rear overhang from the center of the last axle - Hydraulic rear support Loading Ramps - 2-piece loading ramps, length 2,855 mm / 1,415 mm, width 890 mm - Hydraulic ramp adjustment Brake System - 2-line, all-wheel compressed air brake system with diaphragm brake cylinders - Automatic load-sensing brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABS brake Special Equipment - Wheel recess - Boom recess - Extendable widenings - Central lubrication system "BekaMax" Dwodey Iq Tdspfx Aqqsa - Electric power unit with radio remote control Technical Data Gooseneck Loading area (LxW): 3,900 x 2,480 mm 1,000 mm slope for Wirtgen machines Coupling height loaded: 1,250 mm Loading Platform Loading area (LxW): 8,800 x 2,550 mm Extendable by 2,800 mm Stepped up to (LxW): 11,600 x 2,550 mm Steering 1st axle liftable and steered 2nd to 4th axle hydromechanically forced steered (dual-circuit steering) Radio remote control Electric power unit

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, prva registracija: 04/2018, dolžina tovornega prostora: 295.000 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.380 mm, skupna dolžina: 295.000 mm, skupna širina: 2.540 mm, skupna višina: 1.380 mm, Leto izdelave: 2018, Oprema: ABS, = Dodatne možnosti in oprema = - Zračno vzmetenje - Centralno mazanje = Dodatne informacije = Dwjdezc Nxmjpfx Aqqsa Konfiguracija osi Zadnja os 1: Najv. dovoljena osna obremenitev: 10.000 kg Zadnja os 2: Najv. dovoljena osna obremenitev: 10.000 kg Zadnja os 3: Najv. dovoljena osna obremenitev: 10.000 kg Teže Lastna teža: 13.240 kg Nosilnost: 34.760 kg Skupna dovoljena masa: 48.000 kg Funkcionalno Višina nakladalne površine: 138 cm Vzdrževanje Tehnični pregled: veljavnost do 10.2026 Stanje Tehnično stanje: dobro Vizualno stanje: dobro Poškodbe: nobene Finančne informacije Cena: Na zahtevo

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 01/2019, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 13.800 mm, skupna širina: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 245/70R17.5, medosna razdalja: 10.160 mm, barva: rdeča, Leto izdelave: 2019, Oprema: ABS, 1 x dvižna os 3 x krmilna os. Daljinsko upravljanje krmiljenja s pomočjo radija. Hidravlična rampa. Kamera. = Dodatne informacije = Konfiguracija osi Dimenzije pnevmatik: 245/70R17.5 Zavore: bobnaste zavore Dwjdpfx Aszcuxreqqsa Vzmetenje: Zračno vzmetenje Zadnja os 1: Dvojna montaža; profil pnevmatik levo znotraj: 50 %; levo zunaj: 50 %; desno znotraj: 50 %; desno zunaj: 50 % Zadnja os 2: Dvojna montaža; krmiljena; profil pnevmatik levo znotraj: 30 %; levo zunaj: 30 %; desno znotraj: 30 %; desno zunaj: 30 % Zadnja os 3: Dvojna montaža; krmiljena; profil pnevmatik levo znotraj: 40 %; levo zunaj: 40 %; desno znotraj: 40 %; desno zunaj: 40 % Zadnja os 4: Dvojna montaža; krmiljena; profil pnevmatik levo znotraj: 60 %; levo zunaj: 60 %; desno znotraj: 60 %; desno zunaj: 60 % Teže Lastna teža: 11.344 kg Nosilnost: 54.656 kg Dovoljena skupna masa: 66.000 kg Vzdrževanje APK (tehnični pregled): veljavno do 02.2027 Finančne informacije Cena: na zahtevo Identifikacija Tip številka: N/A F-S44 / KRMILNA OS - DVIŽNA = Podatki o podjetju = VSE CENE SO NETO ZA IZVOZ, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) Govorim tudi rusko. Trudimo se zagotavljati pravilne informacije, vendar iz objavljenega besedila ni možno uveljavljati nobenih pravic.

Stanje: rabljeno, številka stroja/vozila: YAFSR31200001xxxx, Leto izdelave: 2012, Prosimo, navedite referenčno številko ob povpraševanju: 23457 Specifikacije: Leto modela: 2012 3 osi Dolžina: 1325 cm Lastna teža: 12.178 kg Dovoljena skupna masa: 59.000 kg 12-tonske osi Krmiljenje na vseh oseh Takoj na voljo Opis: 2012 Faymonville Telemax prikolica s fiksno ploščadjo z raztegljivostjo do 27 metrov. Podaljšek znaša 14 metrov. Pripravljeno za dostavo. Tehnični pregled (TÜV): Da EU odobritev do: 28.02.2027 Dedpezqlx Rofx Aqqjwa Lastna teža: 12.178 Skupna teža: 59.000 Model: Telemax ravna prikolica z 27 m izvlekom = Dodatne informacije = Za več informacij kontaktirajte ATS Norway.

Stanje: novo, lastna masa: 9.450 kg, največja dovoljena obremenitev: 35.550 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.500 mm, širina tovornega prostora: 1.560 mm, skupna širina: 2.550 mm, velikost pnevmatike: 385/65 R 22,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck designed as a loading platform with aluminum chequer plate covering - Front chamfered approx. 45° - Hydraulic lifting arm, lifting and lowering range approx. -280/+250 mm - Two king pin positions at DSR 2,300 and 2,000 mm - Compatible with tractor units: 4x2, 6x2, or 6x4 Loading Bay: Dwsdpfsygvc Hex Aqqja - Loading bay, length approx. 9,500 mm, fitted with angle profiles at the bottom for pallet accommodation (distance from king pin to center of axle assembly approx. 8,000 mm) Axles, Suspension, and Tires: - BPW axle stubs with drum brakes and independent wheel suspension, hydraulic axle leveling with lifting and lowering function - Lowering lock on axles in case of suspension hose rupture, designed for maximum pallet height of 150 mm - Tires: 385/65 R 22.5 - TPMS tire pressure monitoring sensors installed in all wheels including spare wheels - TPMS system in accordance with ECE R 141 Surface Treatment: - Complete steel structure, shot-blasted automatically after welding - Second blasting with corundum for optimal coating adhesion - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for maximum corrosion protection - Final coating with two layers of 2K topcoat, single-color in Novagrau (DB 7350) - Paint system tested with salt spray test according to ISO 9227-NSS; cavity sealing with special wax Included Accessories: - Steel front wall, plug-in, approx. 400 mm high - Toolbox with lid, integrated in the rear area of the gooseneck, approx. 640 x 700 x 215 mm - Plug-in ALU rear wall on the gooseneck, approx. 400 mm high, anodized - 1 pair of foldable ALU side boards on the gooseneck, approx. 400 mm high, anodized - 2" king pin - 3 pairs of recessed lashing rings on the gooseneck (LC 6,300 daN) - Front connector strip with yellow-red air couplings; illuminated operation for gooseneck, suspension, and hydraulic bracing, with on/off switch - Mechanical drop-leg supports for approx. 48,000 kg support load - Access ladder mounted front right, with 2 plug-in handrails - WABCO Roll Stability Support (RSS) - On the longitudinal beams, 9 pairs of lashing rings (LC 6,300 daN) - On the longitudinal beams, a grating platform level with the load securing rails - Hydraulic preinstallation including control unit for installation of 3 pairs of our hydraulic load restraints - First and last axle, left and right, manually liftable - Storage box behind axle assembly, left and right, splash-water protected - Rear chamfer for easier pallet insertion - Eyes on the rear crossmember for mechanical bracing - 7-pin socket on rear crossmember - Electro-hydraulic unit - 4 wheel chocks with holders - 2 axle load gauges mounted on the left side including axle load chart - 3 pairs of hydraulic load restraints with swivel arm, adjustable on the longitudinal beams - Rear door with cross bracing, hinged left and hydraulically locked right, horizontally lockable at 90°, 105°, and 270° - Folding underrun protection for transporting up to 4 empty standard pallets - 1 spare wheel - License plate bracket with lighting, rear left on trailer - Round NATO socket on the front connector strip (Maeler & Kaege VG 96 917) - Central lubrication system with 1 pump, BEKAMAX brand, standard grease execution

Stanje: novo, največja dovoljena obremenitev: 50.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment specification. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. length 3,700 mm, with rear bevel of approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high Dodpfxstx Nwns Aqqowa * ASPÖCK-UNIBOX at the front connection rail with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * 1 pair of detachable ALU side walls, approx. 400 mm high, anodized finish * 1 detachable ALU rear wall, approx. 400 mm high, anodized finish * Over the gooseneck, approx. 40 mm thick hardwood flooring, over the king pin with checker plate covering * 2-inch king pin * Mount at the rear of the gooseneck for ALU drive-on ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. length 8,800 mm, with rear bevel approx. 500 mm x 10° * Recess in platform and rear bevel for accommodating an excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st axle self-steering, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reversing lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg * Platform with continuous and between-axles interrupted 50 mm thick hardwood flooring (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanized side extensions by approx. 230 mm each side (without wooden planks) * Wheel wells with square climbing strips, approx. 15 x 15 mm in front of the axles, continuous opening up to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel wells with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with single-track monitoring of the axles, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. length 4,350 mm and width approx. 900 mm * Hydraulically folding ramp tips * Ramps hydraulically adjustable individually by approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber surface approx. 25 mm and steel surface approx. 5 mm as additional

Stanje: rabljeno, največja dovoljena obremenitev: 33.155 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2023, naslednji pregled (TÜV): 06/2024, Oprema: ABS,

Stanje: rabljeno, največja dovoljena obremenitev: 30.660 kg, skupna masa: 43.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2024, naslednji pregled (TÜV): 03/2025, Oprema: ABS, Celotno našo ponudbo vozil, vključno z vozili, ki so na voljo takoj ali v kratkem času, najdete na naši spletni strani. Izvleček iz opreme. Celotna oprema na zahtevo. Nosilna ploščad * Nizka nosilna ploščad z osrednjim nosilcem v izvlečni izvedbi * Dolžina približno 6.750 mm * 5 parov zank za pritrditev tovora, z možnostjo obračanja navzven (LC 5.000 daN) * 1 par zank za pritrditev tovora, z možnostjo obračanja navzven (LC 10.000 daN) * 1 par zank za pritrditev tovora, horizontalno nameščenih na zadnji strani nosilne plošče (LC 10.000 daN) * Napajalne cevi so zaščitene in nameščene v osrednjem nosilcu ter se prilagajajo različnim dolžinam nizke nosilne plošči. Vratna prikolica (»gosi«) * Dolžina približno 3.900 mm * Vratna prikolica, hidravlično dvigljiva in spuščana ter izvlečna * Tehnična obremenitev sedla: 23.000 kg Zadnje podvozje * Zadnje podvozje v kratki izvedbi z zaprtim zunanjim okvirjem in valjano jekleno prevleko * Podvozje z bagerjem, zadnja polovica je zaprta za namestitev rezervoarjev za zrak * 2 para zank za pritrditev tovora, z možnostjo obračanja navzven (LC 5.000 daN) * 1 par zank za pritrditev tovora, z možnostjo obračanja navzven (LC 10.000 daN) Osi * Os BPW, hidravlično-mehansko nadzorovana * Tehnična obremenitev osi: 12.000 kg na os * Zračna vzmet z ventilom za dvig in spuščanje * Orodje za osi Pnevmatike * 245/70 R 17.5 3PMSF – izbira proizvajalca Dodpfx Aozm D Uceqqswa * Indeks obremenitve (146/146F) Zavorna naprava * V skladu z zakonodajo EU, s sistemom EBS-E (2S2M) brez povezovalnih cevi do vlečne enote Jeklena konstrukcija * Iz visoko trdnih jekel * Vrste jekla: S355J2+N/S355MC (meja tečenja 355 MPa), S690QL/S700MC (meja tečenja 690 MPa) Barvanje * Kvalitetna 2-komponentna (2K) barva * Končna barva, enobarvna, v RAL 3002, karmin rdeča Vključno z naslednjo dodatno opremo: * 2 palčni kraljevi zatič * Pocinkana jeklena sprednja stena, približno 400 mm visoka * Nosilec za rezervno kolo pred sprednjo steno * Na pocinkani priključni letev spredaj, rumeno-rdeče zračne spojke * 4 kosi klinih s pritrdilnim nosilcem (± 5 kg) * Vodenje zadnje osi, od spredaj in zadaj, prek kabelske daljinske upravljalne enote z gumbi, z nadzorom položaja osi (brez vgradnje v vlečno enoto) * Električno-hidravlična enota (± 45 kg) * Rumeni reflektorski trak v skladu z zakonodajo EU, stransko, na izvlečni plošči in zadaj na prikolici * 1 lesen blok, približno 500x250x200 mm * Držalo za aluminijaste rampe na zadnji strani vozila * Držalo za okroglo luč na zadnji strani prikolice * Blatnik na zadnji strani prikolice * Evropske reflektorske table (rdeče-rumene) na zadnji strani prikolice * Na vratni prikolici in zadnji plošči, na levi in desni strani, držalo za opozorilne table, vključno z vtičnico * Priročnik in opis na USB-ključu * Nalepka za omejitev hitrosti 80 km/h, zadaj in na obeh straneh * Manometer za obremenitev osi, za ugotavljanje obremenitve osi, vključno z diagramom obremenitve Vključno s posebno dodatno opremo * Na vratni prikolici, aluminijaste stranske in zadnje stene, vstavljive, približno 2.440 x 400 mm (D x V) * Zadnji pocinkani vstavni profili so odstranljivi. (Dolžina nadstavka približno 2.560 mm). (± 46 kg) * Na vratni prikolici ločena zračna priključna točka s pištolo za polnjenje z zrakom * 2 delovna reflektorja s stikalom na prikolici, nameščena na podstavku vratne prikolice, na levi in desni strani * 6 parov žepov za vstavne profile, približno 100 x 50 mm, v zunanjem okvirju nosilne plošče * 2 para v zunanjem okvirju podvozja (±

Stanje: rabljeno, največja dovoljena obremenitev: 25.630 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, prva registracija: 11/2024, naslednji pregled (TÜV): 11/2026, Oprema: ABS,

Stanje: novo, skupna masa: 58.000 kg, Leto izdelave: 2026, MAX100 4 A 8.60 U Low Loader Semi-Trailer Technical Specifications Speed: 80 km/h Gross weight: 60,800 kg Fifth-wheel load: 18,000 kg Axle load: 42,800 kg Unladen weight: Payload: Gooseneck length: 3,850 mm Loaded fifth-wheel height: 1,250 mm Loading area length: 8,600 mm Extendable by: 5,400 mm Axle spacing: 1,360 mm Rear steering radius: 2,300 mm Loading height at max. load: 860 mm Overall width: 2,540 mm Suspension travel: -55/+145 mm Technical Description Gooseneck With front corners chamfered at 45° and rear bevel approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring, 30 mm thick Loading area, extendable version with rear bevel approx. 1,000 mm x 8° 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) 1 pair of horizontal lashing rings at front of loading area (LC 10,000 daN) Hardwood flooring approx. 48 mm thick, checker plate over axles Ramps Two-piece steel ramps One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 mm x 800 mm with approx. 48 mm thick hardwood covering Ramp with hydraulically folding ramp sections, hydraulic lifting system and hydraulically adjustable. Maximum load capacity per pair: 40,000 kg Tyres 235/75 R 17.5 Braking system in accordance with EU standards with EBS-E (4S3M) without connecting lines to the tractor unit Paintwork First-class, durable corrosion protection of the standard shot-blasted welded frame guaranteed by 2-component zinc-dust primer High-quality 2-component (2K) topcoat, single-color finish in RAL shades of your choice Rear section metallized and painted in RAL 9010 (pure white) Landing Gears: JOST mechanical landing gears with 2-speed gearbox for 24 t Lifting capacity (test load 50 t) Steel structure made of high-strength fine-grain steels. Steel Grades: Steel structure made of high-strength fine-grain steel S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrics in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets. Connection in accordance with ISO. 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Accessories included: One galvanized steel front wall approx. 400 mm high 2" king pin 4 wheel chocks with holder on the front wall Bracket for a rotating beacon at rear of the trailer SAF axles, two fixed axles, one trailing-steering axle, air-suspended, with drum brake, with lifting/lowering function. Trailing steering axle with electro-magnetic reverse lock, can be activated via reverse gear or manually. Dwsdpfxog Sk T Ds Aqqea Axle tools Mounting at the rear of the gooseneck for ALU loading ramps Galvanized folding supports under the bevel of the loading area Mechanical safety lock for the loading area One spare wheel with holder in front of the front wall Yellow reflective tape along the sides, extension and rear of trailer, in accordance with EU regulations. At the galvanized front connection strip, yellow-red air couplings On gooseneck and rear plate left and right, each with mount for warning plates and socket included Mudflap at trailer rear Manual and documentation On gooseneck, plug-in ALU sideboards and rear wall approx. 2,440 x 400 mm (L x H) The rear galvanized stake pockets are removable Body length approx. 2,560 mm, +/- 46 kg 3 pairs WADER container locks in the loading area for a 20', 30' or 40' container (± 30 kg) 6 pairs of stake pockets for plug-in stakes

Stanje: novo, največja dovoljena obremenitev: 30.190 kg, skupna masa: 43.000 kg, konfiguracija osi: 2 osi, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate or short-term delivery, on our website. The following is an excerpt from the specifications. Complete equipment details available upon request. Load area: - Lowbed with external beams, extendable version in SUPER LOW design, length approx. 6,850 mm - Lowbed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking - Supply lines are protected within the extendable beams and automatically adjust to the current lowbed length - 5 pairs of lashing rings, foldable outward (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings Gooseneck: - Gooseneck in SNT design to optimize load area length, approx. 3,750 mm - Gooseneck hydraulically lift/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractor units: 4x2, 6x2 Rear chassis: - Rear chassis in short version with closed outer frame and checker plate cover - Chassis with excavator recess, closed in the rear half to accommodate air tanks - 2 pairs of lashing rings, foldable outward (LC 5,000 daN) - 1 pair of lashing rings, foldable outward (LC 10,000 daN) - 1 pair of lashing rings lying flat, at the front & rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced-steered Djdpfx Asxarl Neqqjwa - Technical axle load: 12,000 kg per axle - Air suspension with raise/lower valve Tyres: - Tyres 245/70 R 17.5 3PMSF, manufacturer of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system according to ECE R 141 - Data transmission to tractor via standardized EBS interface (ISO 11992) - For proper display, the tractor must be capable of transmitting and displaying these data Braking system: - Braking system according to EU regulations with EBS-E (2S2M) Electrical system: - Electrical system in accordance with EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with turn indicator - ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel construction of high-strength fine-grain steels - Steel qualities: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Entire steel construction automatically shot-blasted after welding - Second blasting with corundum for optimal coating adhesion - Complete vehicle chassis coated with HRM metallization using ZINACOR 850 (85% zinc / 15% aluminium) for premium corrosion protection - Top coat with 2 layers of 2K paint in RAL 3002 carmine red, single-color, according to RAL system 841GL - Rims in silver - Rear section metallized and painted in RAL 9010 (pure white) - No metallic paint possible - Paint system tested in salt spray test according to ISO 9227-NSS - Cavity sealing with special wax Including the following additional equipment: - 2-inch kingpin - One galvanized steel front wall, approx. 400 mm high - Remote-steered axles from front and rear via cable control with pushbuttons, with single-track monitoring (without installation in tractor unit) - Hydraulic connections from gooseneck to lowbed with multi-coupler instead of threaded couplings - Electro-hydraulic power unit - Prepared for installation of bolted container mounts for 1x 20' or 1x 40' container on outer beams - Without container locks

Stanje: novo, lastna masa: 14.350 kg, največja dovoljena obremenitev: 53.450 kg, skupna masa: 67.800 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, dvižna zadnja plošča, Gooseneck: - Gooseneck in SNT design for optimization of loading bed length, length approx. 3,700 mm - Gooseneck rear with chamfer approx. 1,000 mm x 10° - For tractor units: 6x2, 6x4, 8x4 short Loading bed: - Extendable loading bed, length approx. 8,800 mm, rear chamfer approx. 500 mm x 10° - A recess in the loading bed and the chamfered section for receiving the excavator dipper stick, approx. 3,850 x 750 x 210/290 mm Two-part steel ramps: - One pair of two-part steel ramps, length approx. 4,350 mm, width approx. 900 mm - Ramps with rubber covering - Ramps hydraulically adjustable individually approx. 235 mm outwards and approx. 215 mm inwards - 'Super Grip' 25 mm rubber flooring and approx. 5 mm steel plate as additional reinforcement on the rear chamfer of the loading bed - Square climbing bars 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: - BPW axles and suspension, 1st axle steering, all other axles hydromechanically forced-steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Tires 235/75 R 17.5 - TPMS tire monitoring system according to ECE R141 - TPMS tire sensors fitted on all wheels, including spares Dwedoya E A Njpfx Aqqsa Surface treatment: - Complete steel structure automatically blasted with shot blasting system after welding - Second blasting with corundum for optimum coating adhesion - HRM metallization of entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for best corrosion protection - Final painting with 2 layers of 2K top coat, single colour in MB 7350 Novagrau Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic power unit for controlling hydraulic functions, with the exception of hydraulic winches - 1 spare wheel - Outer carrier on the gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings in the rear area of the gooseneck - On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized - On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized - On top of the gooseneck, approx. 40 mm thick hardwood flooring, above kingpin area with checker plate cover - 2" kingpin - Round NATO socket on front connection strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross member - 8 pairs of recessed, fold-out lashing rings in the outer frame of the loading bed - Extendable (galvanized) widenings by approx. 230 mm per side - Wheel recesses with square climbing bars, 15 x 15 mm, in front of the axles fully open up to gooseneck cross beam, approx. 700 x 410 mm - Wheel recesses with square climbing bars, 15 x 15 mm, between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU covers for wheel recesses, which can also be used as bridging elements for the extension or as widening boards - 1 pair mechanical rear supports - Radio and cable remote control - Lift axle on front axle - Square climbing bars 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board system - 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Stanje: novo, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 890 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimizing loading area length, approx. 3,700 mm long, with rear tapering of approx. 1,000 mm x 6° - For tractor units: 4 x 2 and 6 x 2 Loading platform: - Loading platform, approx. 9,700 mm long, with hydraulically foldable and lowerable rear section as well as hydraulically liftable front section for driving onto the gooseneck Axles and tyres: - BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle self-steering - 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually - Technical axle load: 12,000 kg - Air suspension with lift/lower valve - 235/75 R 17.5 3PMSF twin tyres - TPMS tyre pressure monitoring system according to ECE R 141 BPW Auto Reverse Control: - Electrohydraulic auxiliary steering for the self-steering axle of a 3-axle unit - Automatic control of the self-steering axle when reversing via gyroscope sensor - Manual steering operation in forward and reverse using separate radio remote control Dodpoyw Sakofx Aqqjwa - Manual operation enabled up to 10 km/h - System powered by separate electro-hydraulic unit Accessories included: - Removable steel front wall, approx. 400 mm high - 3 kW electro-hydraulic power pack - External beams on gooseneck with mounting holes for bolted lashing rings - First mounting hole approx. 200 mm from front, then approx. every 400 mm - One mounting hole at upper rear of external gooseneck beams for a bolted lashing ring - Grating cover with 5 mm sheet reinforcement on gooseneck and rear taper - 2" king pin - Guide plate on gooseneck for fifth wheel plate, approx. 500 mm wide - Round NATO socket at front connection bar (Maeler & Kaege VG 96 917) - 1 pair of removable side aluminium drop sides on gooseneck, approx. 400 mm high, anodized - 4 wheel chocks - Electric winch, approx. 5,400 kg pulling force, with radio remote control - Wire cable approx. 24 m long, cable ø approx. 9.5 mm, including cable pressure roller - Winch installed at the front inside the gooseneck - Continuous grating cover with 5 mm steel underlay for additional reinforcement, designed for point loads: - on the lift bed - on the loading platform - on the hydraulically lowerable rear section - Painted-on sand coating on the gooseneck covering plates and in transition areas between neck and lift bed, between lift bed and loading platform, and between loading platform and ramps - 1 spare wheel - Hydraulic lift bed, approx. 2,500 mm long, load capacity while driving in raised position: 9,000 kg - Hydraulic cylinders are fitted with load-holding valves - Cut-outs in the outer frame of the loading platform and lift bed for attaching tension straps - Extensive lashing positions - Hydraulically lowerable rear section for loading and unloading, can be raised to shorten total coupling length - Load capacity while driving in horizontal position: 10,000 kg - Shortening of total coupling length when raised: 2,350 mm - Painted-on sand coating on the complete ramp, except for the extendable galvanized part of the ramp - Hydraulically extendable rear extensions for loading and unloading - Radio remote control: - Control of hydraulic lift bed - Control of hydraulic lifting of rear extension - Control of hydraulic extension of rear extension - 1st axle with starting aid - Centralized lubrication system with 1 pump - 4 warning signs, approx. 423 x 423 mm, extendable

Stanje: novo, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 890 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimal load deck length, length approx. 3,700 mm, rear end with chamfer approx. 1,000 mm x 6° - For tractor units: 4 x 2 and 6 x 2 Load deck: - Load deck, approx. 9,700 mm long with hydraulically folding and lowering rear section, as well as hydraulically liftable deck at the front for driving over the gooseneck Dwodpsyw R Srofx Aqqoa Axles and Tyres: - BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle steering on trailing arm - 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manual switch - Technical axle load: 12,000 kg - Air suspension with lifting and lowering valve - 235/75 R 17.5 3PMSF twin tyres - TPMS tyre pressure monitoring system compliant with ECE R 141 Included accessories: - Plug-in steel front wall approx. 400 mm high - Yellow-red air couplings on the front connection rail - 3 kW electro-hydraulic power pack for control of hydraulic functions, except hydraulic winches - Outer beams on the gooseneck with fixing holes for screwable lashing rings - First hole approx. 200 mm from front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - One mounting hole on the upper rear area of the outer beams of the gooseneck for a screwable lashing ring - On gooseneck and rear chamfer, grating covering with 5 mm plate reinforcement - 2" kingpin - Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide - Round NATO socket on the front connection rail (Maeler & Kaege VG 96 917) - On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodised - 4 wheel chocks - Electric cable winch, approx. 5,400 kg pulling force, with remote control - Wire rope approx. 24 m long, rope diameter approx. 9.5 mm, incl. rope pressure roller - Winch mounted at the front inside of the gooseneck - Plastic tarpaulin cover for the winch - Mechanical landing gear with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - Continuous grating covering with 5 mm plate reinforcement for additional strength, designed for point loads: - on the lifting bed - on the load deck - on the hydraulically lowerable rear section - Painted-on sand coating on the gooseneck covers and transitional areas between neck and lift bed, between lift bed and load deck, and between load deck and ramps - 1 spare wheel with mounting adapter under the load deck on the right in front of the axles - Hydraulic lifting bed, length approx. 2,500 mm, load capacity in driving position (raised): 9,000 kg - Hydraulic cylinders fitted with load-holding valves - Cut-outs in the outer frame of the load deck and lifting bed for lashing straps - Extensive lashing positions - Hydraulically lowerable rear section for loading/unloading and can be raised to reduce overall train length - Load capacity in driving position (horizontal): 10,000 kg - Reduction of overall train length when raised: 2,350 mm - Painted-on sand coating on the entire ramp, except for the extendable galvanised ramp section - Hydraulic, extendable rear extensions for loading and unloading - Remote control: - Lifting bed operation - Lifting device for rear extension operation - Extension of rear extension operation - 1st axle with traction aid - Central lubrication system with 1 pump - 4 warning boards, approx. 423 x 423 mm, extendable

Stanje: novo, največja dovoljena obremenitev: 25.645 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Dwsdpfx Asxf Silsqqsa Excerpt from the equipment list. Full equipment details available upon request. Loading Platform: - Low-bed with central beam in extendable design, length approx. 6,750 mm - 5 pairs of lashing rings, foldable outwards (LC 5,000 daN) - 1 pair of lashing rings, foldable outwards (LC 10,000 daN) - 1 pair of flush-mount lashing rings at the rear of the loading platform (LC 10,000 daN) Gooseneck: - Gooseneck hydraulically lift/lowerable and detachable Rear Running Gear: - Rear running gear in short version with closed outer frame and tread plate cover - Running gear with excavator trough, trough rear half enclosed for housing air tanks - 2 pairs of lashing rings, foldable outwards (LC 5,000 daN) - 1 pair of lashing rings, foldable outwards (LC 10,000 daN) - 1 pair of flush-mount lashing rings at the rear of the running gear (LC 10,000 daN) Axles: - BPW axles, hydromechanically forced steering - Air suspension with lifting and lowering valve Tyres: - Tyres 245/70 R 17.5 3PMSF - TPMS: tyre pressure monitoring system as per ECE R 141 Brake System: - Wabco braking system in compliance with EU regulations with EBS-E (2S2M) Paintwork: - High-quality 2-component (2K) top coat, single colour RAL 3000 flame red Includes the following additional equipment: - 2 king pins - One galvanised steel front wall, approx. 400 mm high - Remote steering adjustment from front and rear via cable remote control with pushbuttons, including single-track axle alignment (without installation in the tractor unit) - Electro-hydraulic unit - Axle load gauge including axle load diagram - On the gooseneck, aluminium side boards and rear wall, plug-in type, approx. 2,440 x 400 mm (L x H). The rear galvanised plug-in stanchions are removable. (Upper body length approx. 2,560 mm) - Separate air connection with blow gun on the gooseneck - 2 work lights with switch on the trailer, mounted on left and right sides of the gooseneck platform - One INOX toolbox, approx. 1,350 x 400 x 400 mm, mounted on the gooseneck - 6 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform, 2 pairs in the rear frame of the running gear - Galvanised, extendable load width extensions approx. 230 mm per side - Hydraulic connections from the gooseneck to the low-bed with multi-coupling instead of screw couplings. No guarantee on seals. - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2 with removable pump protection - 2 pairs of WADER container pockets in the loading platform, for 1x 20’ container - One removable galvanised intermediate platform with 1 pair of WADER container pockets - 1 pair of steel ramps to bridge over the low-bed’s loading hooks - Loading platform with painted sand layer as anti-slip protection - HRM metallization (High Resistance Metallization)

Stanje: rabljeno, številka stroja/vozila: YF93TPRK0A301xxxx, Leto izdelave: 2011, Prosimo, da na zahtevo posredujete referenčno številko: 23415 Specifikacije: Model 2011 Ni odobren za uporabo v EU Predmet za popravilo 3-osno vozilo Hidravlično dvigalo na 2 osi Pnevmatike (glejte sliko) Nakladalni prikolica Napake in pomanjkljivosti Na voljo za dostavo Opis: Imamo na prodaj 3-osno nakladalno prikolico KAUPE, letnik 2011, ki je na voljo kot predmet za popravilo. Prikolica se prodaja kot predmet za popravilo, saj ima napake in pomanjkljivosti ter ni odobrena za uporabo v EU. Pričakujte stroške popravila. Na voljo za dostavo. Prevoženi kilometri: 1 Tehnični pregled: Ne Odobreno za uporabo v EU do: 19.06.2025 Lastna teža: 6000 Skupna teža: 28900 Nosilnost: 22900 Dwsdpfx Aqezqq E Noqsa Širina: 255 Dolžina: 1015 Model: KAUPE, 3-osna nakladalna prikolica z naklonalnim sistemom, predmet za popravilo = Dodatne informacije = Za dodatne informacije se obrnite na ATS Norway.

Stanje: rabljeno, številka stroja/vozila: XNJ31N5S614L0xxxx, Leto izdelave: 2015, Prosimo, navedite referenčno številko na povpraševanju: 23644 Specifikacije: Model 2015 Pred prodajo bo opravljena EU-homologacija Zadnja EU-homologacija do: 24.02.26 3 osi Pnevmatike (glejte slike) Raztegljiv do 6 metrov Stopnja 1: 4,109 m Stopnja 2: 4,214 m Stopnja 3: 4,765 m Dsdezqm R Ispfx Aqqswa Privezne točke Vtičnice za stebre Zadnje luči Dobavljeno pripravljeno za uporabo Opis: Na voljo imamo nizek polpriklopnik Broshuis iz leta 2015 s tremi osmi in izvlečnim delom do 6 m. Priklopnik bo pred prodajo pridobil EU-homologacijo in naj bi bil po navedbah lastnika v brezhibnem stanju. Dobavljeno pripravljeno za uporabo. TÜV: Ne EU-homologiran do: 24.02.2026 Lastna teža: 13.200 kg Skupna teža: 50.000 kg Nosilnost: 36.800 kg Širina: 255 cm Dolžina: 1.334 cm Model: 3-osni nizkopodložni polpriklopnik z izvlečnim delom 6 m = Dodatne informacije = Za več informacij kontaktirajte ATS Norway.

Stanje: rabljeno, številka stroja/vozila: 202xxxx, Leto izdelave: 2002, Prosimo, navedite referenčno številko na zahtevo: 23156 Specifikacije: Model 2002 Ni odobren za uporabo v EU Zadnja odobritev za uporabo v EU velja do: 19.09.2024 Pomanjkljivosti in napake Dwedpfx Aqozqnf Hoqoa Predmet za popravilo Pnevmatike (glejte slike) Brez krmiljenja na 3. osi Pripravljen za dostavo Opis: Prodajamo nadgradnjo za tovornjak Maur, model 2002, s 3 osmi in kipnim polprikoličnikom, kot predmet za popravilo. Prodaja se kot predmet za popravilo, saj ni odobren za uporabo v EU in ima pomanjkljivosti in napake. Prodaja se v stanju, v katerem je, brez kakršnih koli jamstev. Pričakujte dodatne stroške. Pripravljen za dostavo. Tehnični pregled: Ne Odobritev za uporabo v EU velja do: 19.09.2024 Lastna teža: 11650 Skupna teža: 46000 Nosilnost: 34350 Širina: 255 Dolžina: 1095 Model: nadgradnja za tovornjak, 3-osni kipni polprikoličnik, predmet za popravilo = Dodatne informacije = Za dodatne informacije se obrnite na ATS Norway.

Stanje: rabljeno, številka stroja/vozila: YX9SET3460801xxxx, Leto izdelave: 2010, Prosimo, navedite referenčno številko na zahtevo: 23157 Specifikacije: Model 2010 Ni odobreno za EU Zadnja odobritev za EU do: 28.04.2025 Predmet za popravilo Pnevmatike (glejte slike) Ročica na 1 osi Podporno vrtenje na 3 osi Zadnja luč Pripravljeno za dostavo Opis: Imamo na prodaj nadgradnjo za tovornjak Maur, model 2010, s 3-osnim kipnim priklopnikom, ki je predmet za popravilo. Prodaja se kot predmet za popravilo, ker ni odobreno za EU in ima napake in pomanjkljivosti. Za ponovno uporabo so potrebni dodatni stroški. Pripravljeno za dostavo. Prevoženi kilometri: 1 Tehnični pregled: Ne Odobreno za EU do: 28.04.2025 Lastna teža: 11570 Skupna teža: 46000 Nosilnost: 34430 Širina: 255 Dolžina: 1120 Dedezqnc Sspfx Aqqewa Model: nadgradnja za tovornjak, 3-osni kipni priklopnik, predmet za popravilo = Dodatne informacije = Za dodatne informacije se obrnite na ATS Norway.

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, prva registracija: 06/2016, skupna dolžina: 13.900 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65/22.5, medosna razdalja: 9.970 mm, barva: modra, Leto izdelave: 2016, Oprema: ABS, = Dodatne možnosti in oprema = - Kolutne zavore = Dodatne informacije = Konfiguracija osi Dimenzije pnevmatik: 385/65/22.5 Zavore: Kolutne zavore Dwedpfx Aoyzqqpeqqsa Vzmetenje: Zračno vzmetenje Zadnja os 1: Profil pnevmatike levo: 30 %; Profil pnevmatike desno: 30 % Zadnja os 2: Profil pnevmatike levo: 30 %; Profil pnevmatike desno: 30 % Zadnja os 3: Profil pnevmatike levo: 30 %; Profil pnevmatike desno: 30 % Teže Lastna teža: 7.362 kg Nosilnost: 31.638 kg Dovoljena skupna masa: 39.000 kg Stanje Tehnično stanje: zelo dobro Optično stanje: zelo dobro Dodatne informacije Za več informacij kontaktirajte Bas Wolfs ali Bas Wolfs.

Stanje: novo, lastna masa: 9.300 kg, največja dovoljena obremenitev: 30.100 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, Oprema: ABS, Labod: •Labod z zadnjo nagnjenostjo približno 750 mm x 10° •3 pari pritrdilnih obročev (nosilnost 5.000 daN) •Prevleka iz trdega lesa, debeline 30 mm Nosilna površina z možnostjo podaljšanja: •Nosilna površina z možnostjo podaljšanja in zadnjo nagnjenostjo približno 1.000 mm x 8° •5 parov pritrdilnih obročev, z možnostjo obračanja navzven (nosilnost 5.000 daN) •3 pari pritrdilnih obročev, z možnostjo obračanja navzven (nosilnost 10.000 daN) •1 par pritrdilnih obročev, nameščenih vodoravno na sprednji strani nosilne površine (nosilnost 10.000 daN) •Izrezi na zunanjem okvirju nosilne površine za pritrditev zategovalnih trakov (nosilnost 2.000 daN) •Prevleka iz trdega lesa, debeline približno 48 mm, nad osmi protizdrsna prevleka Osi in pnevmatike: •Os BPW, hidravlično-mehanski sistem usmerjanja •Največja dovoljena obremenitev osi: 12.000 kg •Zračna vzmet z ventilom za dvigovanje in spuščanje •Sistem za nadzor tlaka v pnevmatikah TPMS, v skladu s standardom ECE R 141 •Pnevmatike 235/75 R17.5 3PMSF Barvanje: •Celotna jeklena konstrukcija je po varjenju obdelana s peskanjem v avtomatski napravi •Drugo peskanje s korundom za optimalno oprijemljivost prevleke •HRM-metalizacija celotnega šasija vozila s premazom ZINACOR 850 (85 % cink/15 % aluminij) za zagotovitev najboljše zaščite pred korozijo •Končni premaz z 2 slojema 2K lak, enobarven v barvi DB 7350 Novograu •Zadnji del je metaliziran in pobarvan v barvi RAL 9010 (čista bela) •Test barvanja je bil izveden v testu s solno prho po standardu ISO 9227-NSS •Zapiranje votlin s posebnim voskom Električna instalacija: •Električna instalacija v skladu s predpisi EU, osvetlitev 24 voltov ASPÖCK-NORDIK (ASS3) •Vse stranske markerice utripajo skupaj s smerniki •ASPÖCK-UNIBOX na priključnem panelu spredaj, z vtičnicami 24N, 24S in 15-polno •Dodatna oprema: •2" kraljevi člen •Ena pocinkana jeklena sprednja stena, približno 400 mm visoka •Na pocinkani priključni plošči spredaj, rumeno-rdeče zračne spojke •2 kosov zavornega klina z nosilcem na sprednji steni •Ena rezervna pnevmatika z nosilcem pred sprednjo steno •Elektro-hidravlična agregat Dedpfxezr Egdj Aqqowa •Pomožno krmiljenje, upravljanje od spredaj in zadaj s kabelskim daljinskim upravljalnikom prek gumbov, z nadzorom sledenja osi •Evropske odbijajoče table (rdeče-rumene) na zadnji strani prikolice •Bela odbijajoča trakovi v skladu s predpisi EU, nameščeni ob strani in na podaljšku, zadaj rdeče •Na labodu in zadnji strani, na levi in desni strani, po en nosilec za opozorilne table, vključno z vtičnico •Drseča priključna letev za aluminijaste rampe na zadnji strani vozila •Pocinkane zložljive opore pod nagnjenostjo nosilne površine •En ščitnik proti umazaniji na zadnji strani prikolice •Priročnik in opis •Centralni sistem mazanja BEKAMAX (Pico) z normalno mastjo NLGI-2 in odstranljivim pokrovom okoli črpalke •Na labodu so aluminijaste bočne stene in zadnja stena, ki se lahko vstavijo, približno 2.440 x 400 mm •Zadnje, pocinkane vstavne okvirje je mogoče odstraniti (dolžina nadgradnje približno 2.560 mm) •3 pari WADER-jevih žepov za kontejnerje na nosilni površini za 1x 20-ft, 1x 30-ft ali 1x 40-ft kontejner •6 parov žepov za okvirje za vstavne okvirje 100 x 50 mm v zunanjem okvirju nosilne površine •Ena orodjarna omara INOX 1.500 x 390 x 810 pod nosilno površino, na desni strani v smeri vožnje •Štirje opozorilni znaki, ki se lahko iztegnejo za približno 400 mm, približno 423 x 423 mm z pozicijsko lučjo •Radiokrmiljenje za pomožno krmiljenje, poleg kabelskega daljins

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, prva registracija: 09/2010, dolžina tovornega prostora: 136.600 mm, širina tovornega prostora: 2.500 mm, skupna dolžina: 206.600 mm, skupna širina: 2.500 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, stanje pnevmatik: 40 odstotek, barva: drugo, Leto izdelave: 2010, Oprema: ABS, = Dodatne možnosti in oprema = Dwjdszrzl Nopfx Aqqea - 3 osi - dvižna os - zračna vzmetitev - kolutne zavore - krmiljena os = Dodatne informacije = Konfiguracija osi Dimenzija pnevmatik: 385/65 R22.5 Globina profila pnevmatik: 40 % Zadnja os 1: krmiljena Teže Lastna teža: 10.000 kg Dovoljena nosilnost: 35.000 kg Celotna dovoljena masa: 45.000 kg Vzdrževanje, zgodovina in stanje Tehnični pregled (APK): veljaven do 09.2026 Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Finančne informacije Cena: na zahtevo Identifikacija Registrska številka: QKW546