Faymonville 4-1+3-Achs-Tele-Semi-Radmulden-Rampen Zg nakup rabljenega (65.744)

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, PT 30 Profile: ----Braking System: * EBS (electronic braking system) * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Drawbar: * Drawbar, 1,200 mm long, with 40 mm towing eye and height adjustment via traction spring & turnbuckle ----Electrical / Lighting: * Smart-Board information system mounted on the trailer (for axle load indication – separate front and rear display) * Tire pressure monitoring with display capability in the truck via EBS signal, no truck-side installation required * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear Hnsdpstplwiofx Agpou ----General Attachments: * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning board sets front and rear * Front axle plastic quarter mudguards with spray protection * Rear axle straight galvanized steel mud skirts with spray protection * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Compartment in the bogie for accessories, with folding lid and 2 fixed container locks (directly behind the bogie platform) * 2 galvanized steps on the bogie, left and right ----Low Loader Platform: * Robot-welded non-slip overlay on the steel plate of the bogie platform (protruding weld seams) ----Load Securing (La-Si package consisting of): * 2 lashing eyes (13.4 t) front left & right on front bulkhead carrier * 1 pair of UVV lashing rings at front & rear (13.4 t) and 3 pairs of UVV lashing rings on each side (10 t), pivotable and lowerable, loadable in all directions, recessed in outer frame * 3 stake pockets on each side, each with 2 t lashing capacity * Profifix lashing rail in longitudinal axis, centered in flat area, for lashing up to LC 3000 daN ----Widening: * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear taper) * Widening planks stored in the centre of the loading platform ----Ramps: * Hydraulic one-piece drive-on ramps, approx. 3,000 x 720 mm * Mechanically adjustable laterally * 4-way control block for future retrofit of hydraulic ramp lateral adjustment ----Excavator Arm Rest: * Excavator arm rest above rear axle, extending to the rear end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator arm rest, located laterally in the main longitudinal frame ----Loading Height: * Loaded approx. 910 mm +/- 20 mm (air suspension) ----Paintwork: * Chassis, bogie, folding outriggers, drop-down supports and ramps hot-dip galvanized * Axles, slewing ring, air tanks, and drawbar painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 36.540 kg, skupna masa: 48.500 kg, konfiguracija osi: 3 osi, prva registracija: 06/2020, naslednji pregled (TÜV): 09/2028, Leto izdelave: 2020, Oprema: ABS, Notranja številka vozila: G400133 Takoj na voljo na našem dvorišču v Kaufungenu. Več informacij na: ? Luis Lucena ? Viktoria Sologubova Nemščina Langendorf SATÜ 30-10,0 M nizkopodsna prikolica | 3 osi | Niše za kolesa | 36.540 kg nosilnosti Za prodajo je rabljena nizkopodsna prikolica Langendorf SATÜ 30-10,0 M, izdelana leta 2020. Prikolica ima niše za kolesa, daljinsko upravljanje in tri osi, od tega dve krmilni in ena dvižna. S 10.000 mm dolgo nosilno površino in tehnično nosilnostjo 36.540 kg je nizkopodsna prikolica idealna za transport gradbenih strojev, kolesnih nakladalcev, bagrov in druge težke opreme. Tehnični podatki: * Proizvajalec/model: Langendorf SATÜ 30-10,0 M * Vrsta vozila: Nizkopodsna prikolica * Prva registracija: 06/2020 * Letnik: 2020 * Število osi: 3 * Dve krmilni osi * Ena dvižna os * Skupna dolžina: 13.900 mm * Dolžina nosilne površine: 10.000 mm * Tehnično dovoljena skupna masa: 48.500 kg * Prazna teža: 11.960 kg * Nosilnost: 36.540 kg * Niše za kolesa * Daljinsko upravljanje * Tehnični pregled: Nov * Številka vozila: G400133 * Stanje: Rabljeno * Nemško vozilo Ogled je možen po predhodnem dogovoru. Dodatne informacije, fotografije in videoposnetke lahko dobite na zahtevo. Pridržane napake, spremembe in možnost predhodne prodaje. Angleščina Langendorf SATÜ 30-10.0 M nizkopodsna prikolica | 3 osi | Niše za kolesa | 36.540 kg nosilnosti Rabljena nizkopodsna prikolica Langendorf SATÜ 30-10.0 M, izdelana leta 2020. Ta prikolica ima niše za kolesa, daljinsko upravljanje in tri osi, vključno z dvema krmilnima osama in eno dvižno osjo. S 10.000 mm dolgo nosilno površino in tehnično nosilnostjo 36.540 kg je nizkopodsna prikolica idealna za transport gradbenih strojev, kolesnih nakladalcev, bagrov in druge težke opreme. Tehnični podatki: * Proizvajalec/model: Langendorf SATÜ 30-10.0 M * Vrsta vozila: Nizkopodsna prikolica * Prva registracija: 06/2020 Hnsdpfx Aey A Uxaegpsu * Letnik: 2020 * Število osi: 3 * Dve krmilni osi * Ena dvižna os * Skupna dolžina: 13.900 mm * Dolžina nosilne površine: 10.000 mm * Tehnično dovoljena skupna masa: 48.500 kg * Prazna teža: 11.960 kg * Nosilnost: 36.540 kg * Niše za kolesa * Daljinsko upravljanje * Tehnični pregled: Nov * Številka vozila: G400133 * Stanje: Rabljeno * Nemška prikolica Ogled je možen po predhodnem dogovoru. Dodatne informacije, fotografije in videoposnetke lahko dobite na zahtevo. Pridržane napake, spremembe in možnost predhodne prodaje. Finančni primer: * Notranja številka: G400133 * Nakupna cena: 54.900,00 € * Akontacija: 10 % * Trajanje: 60 * Mesečni obrok: 849,02 € Končna vrednost: 10.380,00 € Če vas ponudba zanima ali jo želite prilagoditi vašim potrebam, nas kontaktirajte (g. Enchev). Veselimo se vašega klica. Pridržana napaka. Z veseljem prevzamemo vaše rabljeno vozilo. Financiranje je možno neposredno pri nas. GOLEC NUTZFAHRZEUGE GMBH Govorimo: nemščino, angleščino, španščino, poljščino, ukrajinščino, ruščino, bolgarščino.

Stanje: rabljeno, prva registracija: 11/2006, Leto izdelave: 2006, MÜLLER - MITTELTAL T4 Kompakt Vrtljiva prikolica - Nizkopodna prikolica z zračno vzmetenimi in jamskimi kolesi - 4 x zračno vzmetene GIGANT - osi - zračno vzmetenje - 4 x kolesne jame - mehanske nakladalne rampe - 2 zadnja podporna noga, zložljiva - izvlečne opozorilne table Hedpfx Ajwmpbdsgponu - ABS - MICHELIN pnevmatike: 235/75 R 17.5 - težka izvedba: 40.000 kg skupne mase - lastna teža: 8.400 kg - skupna dolžina: 11.750 mm - vlečna zanka: 50 mm Posebej primerna za prevoz strojev za rezanje apna! - nemška prikolica - Tehnični pregled / tehnični preizkus možen na zahtevo in za doplačilo! Pridržujemo si pravico do napak in vmesne prodaje!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: VAVKSK339SZ542526, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2025, naslednji pregled (TÜV): 06/2027, dolžina tovornega prostora: 7.350 mm, širina tovornega prostora: 2.330 mm, višina nakladalnega prostora: 1.470 mm, prostornina tovornega prostora: 24 m³, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5", stanje pnevmatik: 100 odstotek, barva: siv, Leto izdelave: 2025, Na slikah so arhivske slike, vozilo pa je morebiti še v uporabi! #Šasija: Jeklena šasija, varjena konstrukcija z zadnjo nagibno osjo, optimizirana glede na težo v lahki izvedbi. Zamenljiva 2" kraljična Višina sedla šasije v nezasedenem stanju približno 1200 mm - približno 1250 mm pri zračno vzmeteni peti osi. Podporni sistem: Mehanske jeklene dvižne vtičnice, 2 x 12 t, upravljanje z ene strani na desni #Osi: Osi SAF-Intradisc-B9 z diskovnimi zavorami / 430 mm 3 osi Sprednja os, samodejno dvigljiva = dviga in spušča glede na težo; dodatno z vgrajeno silo za spuščanje, vključno z omejevalnikom hitrosti. Opomba: Višina nakladanja oziroma skupna višina se poveča za približno 50 mm! #Elektrika Pri 15-polnem vtiču: PIN 12 Pri 7-polnem vtiču: PIN 6 (upravljano s plusom) #Kolesa 6 kosov pnevmatik 385/65 R22,5", 6 kosov aluminijastih platišč #Zavorna naprava / Vzmetenje Dvovodna tlačna zavorna naprava Zavorna naprava proizvajalca Knorr EBS sistem RSS/RSP - Zavorne/zračne priključke z 2 ločenima sklopkama, rumene / rdeče barve EBS/ABS vtičnica spredaj Elektronsko zračno vzmetenje z avtomatskim sistemom za spuščanje prek indukcijskega stikala in dodatno zaporo za spuščanje prek vrtljivega stikala na prikolici Brez sistema za dvig in spuščanje Brez povezovalnih cevi oz. kablov za vlečno vozilo #Pomožni/varnostni sistemi Indikator obremenitve osi preko signala EBS-Cambus za prikaz na zaslonu Sistem za nadzor tlaka v pnevmatikah s senzorjem tlaka v kolesih, za prikaz na zaslonu v kabini #Kipna posoda Jeklena kipna posoda s strjeno dno iz posebnega jekla HB 450 (Hardox ali podoben material) in strjenim zgornjim robom Debelina dna 5 mm = celostno dno, debelina strani 4 mm Sprednja in zadnja stran naklonjeni, zgornji rob zaokrožen Stopnice za vstop v posodo, notri spredaj na levi strani Jeklena stranska stena z potopljenim ležajem in avtomatskim-mehanskim 2-klamstnim osrednjim zapiranjem, zadnja stena nameščena znotraj z žlebom #Hidravlika Brez hidravličnih povezovalnih cevi za peto os Visokotlačna sprednja stiskalnica za naklonsko izpraznjevanje #Ponjava Plastična rolovna ponjava, vključno z aluminijasto cevjo in ročnim mehanizmom, brez carinskega zapirala 1 odstranljiva prečna podpora in na desni strani pritrdilni nosilec za rolovno ponjavo; Hnedpezm Ipkjfx Agpou Zaklep za zvito rolovno ponjavo Pritrditev ponjave v smeri vožnje na levi strani s 3 nosilnimi kotniki in osrednjim napenjalnim mehanizmom spredaj, brez zateznih trakov (hitro zapiranje na zgornjem robu) Barva ponjave, podobna RAL 9006, bela aluminijasta #Osvetlitev / Elektrika 24-voltna svetlobna naprava 2 kosa polnih LED večkomornih zadnjih luči, 2 kosa LED pozicijskih luči spredaj 2 kosa LED stranskih luči zadaj Blinkajoče LED stranske gabaritne luči 2 kosa LED luči za registrsko tablico 2 x 7-polni vtiči 1 x 15-polni vtič Brez električnih povezovalnih cevi za peto os #Barvanje Čiščenje z jeklenimi granulami Podvozje: RAL 7021, črna siva Kipna posoda in zadnja stena pobarvani = RAL 7001, srebrno siva Zgornji rob kipne posode v barvi kipne posode = RAL 7001, srebrno siva #Dodatna oprema / Splošno 3 pari plastičnih zaščitnih blatnikov za posamezna kolesa, brez zaščite proti brizganju, zadaj z zložljivimi brizgalniki Aluminijasta trapezoidna zaščita za podvozje, zložljiva, neobarvana z jeklenim nosilcem, v skladu z direktivo EU 2 klini 1 kipna vlečna kljuka, nameščena na nosilcu šasije v smeri vožnje na desni strani Dušilec hrupa = gumijaste podloge Jeklena stoječa ploščad z aluminijasto varnostno mrežo s varoval

Stanje: rabljeno, skupna masa: 65.000 kg, konfiguracija osi: > 3 osi, prva registracija: 09/2005, Oprema: ABS, Vehicle ID No.: W09S4H44050D04001 – SANH 4-axle including 1-axle DOLLY First registration: 01/09/2005 Hnjdpfx Aowadh Ssgpju Next German roadworthiness inspection (HU) due Unladen weight: SANH 16,900 kg / DOLLY 2,700 kg Overall length: 12,600 mm (excluding dolly) Gooseneck dimensions: 3,750 mm – hydraulically adjustable King pin: 3.5 inch Low bed length: 8,600 x 2,530 mm – loading height approx. 900 mm TELESCOPIC up to 12,300 mm Axle loads: 4 x 10,000 kg Fifth wheel load: 25,000 kg (with dolly: 35,000 kg) BPW Eco axles with drum brakes 4 x hydraulically forced steering axles with radio control Stake pockets incl. stakes Central lubrication system Tyres: 235/75 R 17.5 Spare wheel carrier WITHOUT spare wheel DOLLY = hydraulically suspended Tyres: 235/75 R 17.5 – remaining tread 12 mm Modifications, interim sale, and errors excepted. Description serves for general vehicle identification and does not constitute a warranty in the sense of sales law. The description in the purchase contract is binding. Our offer does not include a new TÜV inspection as standard. If required, we can provide an offer from our partner workshops for a new inspection! Vehicle may have promotional decals and/or lettering. Our general terms and conditions of delivery and payment apply.

Stanje: rabljeno, lastna masa: 19.880 kg, največja dovoljena obremenitev: 40.120 kg, skupna masa: 60.000 kg, konfiguracija osi: > 3 osi, prva registracija: 03/2021, dolžina tovornega prostora: 7.700 mm, širina tovornega prostora: 2.850 mm, višina nakladalnega prostora: 350 mm, velikost pnevmatike: 245/70 R 17,5, barva: siv, Leto izdelave: 2021, Oprema: ABS, Šasija: - Varjena konstrukcija iz jeklenega okvirja s sprednjim in zadnjim upognjenim okvirjem ter ravno nizkopodno platformo brez naklona - Sprednji vogali poševno odrezani 400 mm x 400 mm - Nizkopodložje z dvema izvlečnima okvirjema, izvlečna dolžina cca 5.400 mm, 1x 400 in nato po 500 mm, pnevmatsko zaklepanje - Zaklep pri 1.833 mm za 30 ft kontejner - Zaklep pri 4.900 mm za 40 ft kontejner - Premišljena vmesna podpora širine cca 500 mm, uporablja se le pri teleskopiranju vozila (v zloženi različici brez vmesne podpore) - Sedelna plošča z zamenljivim 2'' in 3,5'' kraljevim čepom - Maksimalna točkovna obremenitev: 50 t na 4 m v zloženem stanju - Neprekinjena izkopna kad nad osnim agregatom s preklopnim aluminijastim pokrovom - 2 zaklenljiva pokrova, vsak dolžine 1.500 mm. Zadnji del s fiksnim aluminijastim pokrovom za elektro-hidravliko in centralni sistem mazanja - Mehanska spojka z zatiči na zadnjem delu nizkopodložja za vnaprejšnjo napetost v podu Labodji vrat: - Hidravlično spuščajoči in po višini nastavljiv labodji vrat - Naslon na vlačilcu poteka preko dveh hidravličnih valjev. Upravljanje preko elektro-hidravlične enote - Priklop na labodjem vratu v kombinirani izvedbi za priklop nizkopodne nakladalne površine in reduktorskega agregata - Labodji vrat s preklopom za različne pritiske na sedlo (18/24 t) Osovine, krmiljenje in pnevmatika: - Gigant nizkopodne polosovine, vsaka 12 t nosilnosti - Hidravlično vzmetenje, dvig cca 300 mm, višina vožnje nastavljiva hidravlično - S-cam zavore 300/150 mm, zavorne obloge brez azbesta - Avtomatski nastavljalci zavor t - Širina tira 1.995 mm, razdalja med osmi 1.510 / 1.510 mm - Krmilna ročica za vzmetenje levo + desno zadaj - 1. os (reduktorski agregat) hidravlično prisilno vodena preko sedelne sklopke - 2., 3. in 4. os hidravlično prisilno vodene preko sedelne sklopke in osi krmilne z glavo - Elektrohidravlično naknadno krmiljenje preko elektroagregata spuščenega labodjega vratu s napajanjem iz vlečnega vozila preko NATO vtičnice - Krmilni kabel in vtičnica spredaj in zadaj na zaključni plošči - Daljinsko upravljanje s kablom ter dodatno brezžično daljinsko upravljanje - Gume 13 / 17 245/70 R 17.5 146/146F, brez zračnic Reduktorski agregat: - Enosna, lahko se namesti med labodji vrat in nizkopodložje - Polosovina s 12 t nosilnosti, hidravlično vzmetenje - 4-kratno oplaščene pnevmatike - Zavorne cevi preko priključnih glav, hidravlične cevi preko šestkratne multi-spojke - Osovina z blokirnim ventilom in vstavnim zatičem za dvigovanje Dodatna oprema: - Sprednja stena = škatla za orodje iz jeklene pločevine, visoka 600 mm, globoka 550 mm, preko celotne širine z zgornjim pokrovom ter stransko levo + desno - Vogali spredaj prilagojeni poševnini - Bočne stene iz 25 mm aluminijastih votlih profilov, višina 600 mm, enodelne, do 500 mm pred nizkopodložjem, zložljive - Vstavljena aluminijasta zadnja stena ter vstavljivi zadnji vogalni stebri v višini bočne stene - Dolg nosilec registrske tablice na zaključni plošči - 2 ECE opozorilni tabli na zaključni plošči - 3 para vgrajenih pritrdilnih obročev na visoki platformi, vsak z vlečno silo 4 t, ca. 1.500 mm od spredaj montirani - 3 para težko-tovorstnih pritrdilnih obročev z vlečno silo po 13,4 t, od tega Hsdpfezd Tdzjx Agponu - 1 par visi na visoki platformi, vsak 1 par na srednjem delu visoke postelje spredaj in zadaj na naklonjenem vzdolžnem nosilcu - Zložljive razširitve obeh strani v nizkopodložju na skupno širino 3.000 mm - Izvlečne opozorilne table, brezstopenjsko

Stanje: rabljeno, največja dovoljena obremenitev: 31.510 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, prva registracija: 05/2008, dolžina tovornega prostora: 9.960 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 11.880 mm, skupna širina: 2.550 mm, Skupna masa: 24.000 kg / 40.000 kg Lastna masa: 8.490 kg Nosilnost: 15.510 kg / 35.510 kg Skupna dolžina: 11.880 mm Dolžina tovornega prostora: skupaj približno 9.960 mm / približno 7.500 mm (tovornega dna, vključno z zadnjim podaljškom) Širina: 2.550 mm - 3.000 mm Hnjdpfx Agez N Rnmspeu Višina tovornega prostora: 900 mm Dodatne informacije: - 3 m razširitev - zračna vzmet z možnostjo dviganja in spuščanja - priklopna prikolica 40/50 mm - hidravlične rampe, 3.000 mm - protidrsne letve

Stanje: novo, lastna masa: 10.000 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 51.600 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Loading Platform: - Gooseneck, length approx. 4,100 mm with central beam - Extendable loading platform, length approx. 9,500 mm with rear taper approx. 350 mm x 10° and integrated hook-on bar for attaching loose ALU approach ramps - Pneumatic locking system with conical locking bolts and reinforced locking positions - Supply lines are protected inside the extendable beams and automatically adjust to the respective platform length Axles, Suspension, and Tyres: - BPW axles and suspension, all axles hydro-mechanically forced steered - Mounted on turntable - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Tyres 235/75 R17.5, twin-mounted Paintwork: - 6-coat surface treatment - Complete steel structure shot-blasted after welding - One coat of zinc-based primer, one coat of adhesion primer - Final paintwork with 2 layers of 2-component (acrylic) paint, single colour in MB 7350 Novagrau, followed by cavity sealing with special wax Steel Structure: - Steel structure made from high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) - Welders certified according to DIN-EN 287-1 - Welding process MAG according to EN ISO 4063, shielding gas M21 according to EN ISO 14175 Accessories: - Steel front wall, approx. 1,600 mm high - Round NATO socket at the front connection strip - 3 kW electro-hydraulic unit for controlling hydraulic functions - 4 pairs of recessed lashing rings in the outer frame of the gooseneck - 4 pairs of stake pockets integrated into the outer frame of the gooseneck for stakes approx. 100x50 mm - 1 transverse stake pocket strip mounted in the floor of the gooseneck for stakes approx. 100x50 mm (1x rear on gooseneck) - 2'' kingpin - Mechanical landing legs with 2-speed gearbox and hand crank - JOST Module B – static test load = 50,000 kg - On the gooseneck and loading area, approx. 32 mm wooden flooring in ALU-omega profiles - One locking position on the extension, approx. every 500 mm - 10 pairs of recessed folding lashing rings in the outer frame of the loading area, folding outwards - 6 pairs of stake pockets integrated into the outer frame of the loading area for stakes approx. 100x50 mm - 2 transverse stake pocket strips mounted in the floor of the loading area for stakes approx. 100x50 mm - INOX toolbox approx. 1,250 x 500 x 550 mm - Tapered end crossmember of the vehicle, approx. 350 mm 10° Hnedpfx Aeiuy Nlegpeu - Integrated hook-on bar for loose ALU approach ramps at the rear crossmember of the vehicle - 1 pair of drop tube supports at the rear crossmember - Mudguards on all axles - Central lubrication system with 1 pump - Remote steering from front and rear operable via cable remote control with push button, including single-track monitoring of the axles - Under the gooseneck and at the rear crossmember, left and right, each with a 7-pin socket for warning panels - One 7-pin socket at the rear crossmember - Container locks "TWIST-LOCKS" in the loading area for transport of 2x 20ft and 1x 40ft containers - Radio remote control for rear steering in addition to cable remote control, with 2 indicator lights on the receiver for single-track monitoring - 2 axle load gauges + axle load diagram - 4 warning panels approx. 423 x 423 mm, extendable by approx. 400 mm - Standard HRM Metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible areas hot-coated in metallic finish using ZIN

Stanje: rabljeno, lastna masa: 14.100 kg, največja dovoljena obremenitev: 33.900 kg, skupna masa: 48.000 kg, konfiguracija osi: > 3 osi, prva registracija: 12/1999, vzmetenje: zrak, velikost pnevmatike: 235/75 17,5, stanje pnevmatik: 50 odstotek, barva: zelen, Leto izdelave: 1999, velikost sprednje pnevmatike: 235/75 17,5, velikost zadnje pnevmatike: 235/75 17,5, voznikova kabina: dnevna kabina, emisijski razred: noben, Oprema: ABS, registracija tovornjaka, Reference number for inquiries: 68575 Nooteboom, Euro standard * Year of manufacture: 1999 * ABS (Anti-lock Braking System) * Air suspension * Suspension type: Air * Gross vehicle weight: 48,000 kg * Unladen weight: 14,100 kg * Payload capacity: 33,900 kg * Permissible gross weight: 48,000 kg * Axle manufacturer: SAF * Tire condition, 1st axle: 50% -- 50%, tire size: 235/75 R17.5 * Tire condition, 2nd axle: 40% -- 40%, tire size: 235/75 R17.5 * Tire condition, 3rd axle: 50% -- 50%, tire size: 235/75 R17.5 * Tire sizes: 235/75 R17.5 * Body manufacturer: ES-GE * 3rd axle hydraulically forced-steered * Extendable up to 9,950 mm * Telescopic extension defective * Loading platform length: 10,990 mm Disclaimer: Specifications subject to change, prior sale, and errors excepted. More images and videos are available on our website. Our comprehensive service portfolio includes: * Purchase, sale, and rental of commercial vehicles * Fast and straightforward financing solutions * Processing of all (export) documents * Ordering of export and customs license plates * Vehicle preparation: new tarpaulins, signage, resprays, etc. * Professional loading and load securing * TÜV inspections, registration service Hnjdpfxsyibz Re Agpsu * Transportation of commercial vehicles Please contact our trained specialist staff; we are happy to advise you.

Stanje: rabljeno, lastna masa: 6.572 kg, največja dovoljena obremenitev: 29.428 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2025, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, | Krone SDP27 Profiliner | 1. in 3. os dvigljivi | Ponjava EDSCHA | Krone osi s kolutnimi zavorami | Nosilec rezervnega kolesa | Orodjarna | Paletni zabojnik | Pnevmatike: 385/65 R22,5 | Pridržujemo si pravico do sprememb, napak pri vnosu podatkov in predhodne prodaje. Hnodpfjz S Il Isx Agpou

Stanje: rabljeno, prva registracija: 09/2006, HANGLER 3 SAZEL 24-4, triosna prikolica z odprto platformo, raztegljiva do 4 metrov, krmilna os, nosilci drog. Stanje: glede na starost dobro, pripravljena za uporabo. Pnevmatike: 30–80 %. Tehnične specifikacije: Splošno: * Kratka opis: HANGLER 3 SAZEL 24-4, prikolica z odprto platformo, raztegljiva do 4 metrov, krmilna os, nosilci drog. Kombinirano vozilo: Hnsdpez Dzkaofx Agpsu * Hladilnik: Ne. Motor: * AdBlue: Da. Prenos: * Zaviranje z upočasnjevalnikom: Ne. Podvozje: * Vzmetenje: zračno vzmetenje. * Lita platišča: Ne. * Dvigalna os: Ne. * Krmilna os: Da. Povezava z vlečno prikolico: * Povezava za invalide: Ne. Dokumentacija: * Prazna teža: 7.480 kg.

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, prva registracija: 12/2002, vzmetenje: zrak, Leto izdelave: 2002, Oprema: ABS, = Dodatne možnosti in dodatna oprema = - EBS - Dvigalna os - Zračna vzmetitev = Dodatne informacije = Hnsdpjzvzt Isfx Agpsu Vzmetenje: zračna vzmetitev Zadnja os 1: krmiljena Zadnja os 2: krmiljena Zadnja os 3: krmiljena Lastna teža: 12.940 kg Nosilnost: 21.060 kg Dovoljena skupna masa: 34.000 kg Tehnično stanje: dobro Vizualno stanje: dobro Številka vozila: Nizkotlačna prikolica: 15 Faymonville / 3 x krmiljene osi z daljinskim upravljanjem SAF / podaljšljiva .: YA9TL35F02113453 SAF 3 x krmiljene osi z daljinskim upravljanjem Lastna teža: 12490 Skupna teža: 34000 Dolžina: 9,20 m s podaljškom 15,10 m + podaljšek 20,40 m, skupna dolžina 24,40 m Širina: m = Informacije o podjetju = Ne odgovarjamo za tiskarske in prepisne napake, spremembe, posredni prodaji in napake. Pridržana pravica! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobilni telefon: gospa Sabine Faust E-pošta.

Stanje: novo, največja dovoljena obremenitev: 43.929 kg, skupna masa: 58.000 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 16.690 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 3.570 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer K.SLA R 4 / 2N ? 18/40 Low Loader Extendable with Wheel Wells (NEW) Equipment & Highlights Technology & Superstructure Extendable low loader with wheel wells * External length: 13,190 mm; platform: 9,240 mm + 3,500 mm extension * Platform height: only 875 mm for low loading height * Overall width: 2,550 mm + 600 mm extension * Unladen weight: approx. 14,071 kg * Perm. total weight: 58,000 kg (80 km/h) / 63,800 kg (60 km/h) Hedpfx Ajx Efznjgpjnu Chassis & Axles 4 BPW axles, front 2 fixed, rear 2 trailing axles * Lift axle (automatic + manual) * Air suspension with load gauge * WABCO EBS 4S/3M, ABS & RSS * WABCO Smartboard (axle load, suspension, diagnostics) * 16x tyres 245/70 R17.5 (M+S + 3PMSF) * Tyre pressure monitoring according to R141 Ramps & Loading Area Foldable 40-ton ramps * Ramp length 2,750 mm, 850 mm width * Hydraulic sliding system * 45 mm hardwood floor + steel chequer plate over wheel arches * Wheel wells + cover plates included * Excavator arm recess at rear Load Securing Comprehensive lash points: * 2×2 lashing rings 5,000 daN & 1×2 lashing rings 10,000 daN on gooseneck * 3×2 lashing rings 5,000 daN & 4×2 lashing rings 10,000 daN on platform * 8,000–10,000 daN on outer frame / well area * 5×2 stake pockets, removable stakes 50×100 mm * Container locks for 1×20 ft or 1×30 ft Equipment & Comfort 1× Toolbox (700×400×360 mm) * Stake box * Beacon * LED side lighting, LED work lights * Wheel chocks * Extension boards with LED * Standard 2" kingpin * Metallized chassis (Zn/Al 85/15) – high corrosion protection * Colour: RAL 9005 Black Special Features New & immediately available * High payload, extremely versatile * Perfect for machinery transport, construction equipment, vehicles, etc. * Very robust construction, premium BPW components We are happy to provide further information upon request.

Stanje: novo, lastna masa: 15.450 kg, največja dovoljena obremenitev: 65.550 kg, skupna masa: 80.000 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 21.900 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 925 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimized platform length, approx. 3,700 mm long, with rear tapering of approx. 1,000 mm x 10° Technical fifth wheel load: 30,000 kg. For tractors: 4x2, 6x2, and 6x4 Loading Platform: Double-extendable loading platform, approx. 8,800 mm long with rear taper of approx. 500 mm x 10°. A support table approx. 300 mm wide is welded to the central beam, featuring elongated slots at the front and rear for optional bridge elements that can be hooked in and repositioned Pneumatic locking with conical locking pin and reinforced locking positions, supply lines are protected inside the extendable beams and automatically adjust to the respective platform length Axles and Tyres: BPW axles and suspension, first axle self-steering, all other axles hydraulically and mechanically forced-steered Hnodpfx Asrigw Rjgpsu First axle equipped with an electro-magnetic reverse lockout, activated via reverse gear and manually. Technical axle load: 12,000 kg. Air suspension with lift and lower valve Manufacturer by our choice Sockets and Lighting: 24-volt lighting system in accordance with EU regulations ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Complete HRM metallizing Full steel construction, shot-blasted, then hot-finished with ZINACOR 850 Paintwork: 6-stage finishing process: Complete steel construction shot-blasted after welding 1 coat of zinc-based primer, 1 coat of adhesion primer. Final paintwork in 2 coats of 2K paint in single-tone DB 7350 Novagrau, followed by cavity sealing with special wax Accessories: Detachable front wall made of steel, approx. 400 mm high Connection strip for supply lines to the tractor unit, fitted at the height of the outer frame profile ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets. If your pin configuration deviates from the ISO connector standard, please inform us 3 kW electro-hydraulic power unit for hydraulic functions (excluding hydraulic winches) 1 pair of plug-in ALU sidewalls on the gooseneck, approx. 400 mm high, anodized finish 3.5'' king pin. Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide 2 wheel chocks with holder in front of the front wall Mechanical landing legs with 2-speed gearbox and crank Control valves for hydraulic ramps located on the right side of the vehicle 1 pair of mechanical rear supports Central lubrication system with 1 pump, BEKAMAX brand, using standard grease according to NLGI-2 Removable guard covering the pump(s) of the central lubrication system Remote steering from front and rear, controlled by cable remote with push buttons, with axle tracking control, no installation required on tractor unit Under the gooseneck and on the rear crossmember, one 7-pin socket with holder for warning signs each on left and right. One 7-pin socket on the rear crossmember Manual and documentation One-piece INOX stowage box, approx. 2,480 x 340 x 390 mm, straight design Please note that any special equipment and accessories will increase the unladen weight and correspondingly reduce the payload Warning package: 4 warning boards, approx. 423 x 423 mm, extendable by approx. 1,000 mm, incl. 2 LED position lights and brackets for beacon.

Stanje: rabljeno, prva registracija: 12/2018, Leto izdelave: 2018, SCHMITZ CARGOBULL SCB*S3T 24/L SPECIAL – STANDARD – Prikolnica s platneno nadgradnjo/z zložljivo streho !!RAZŠIRLJIVA!! !!MEHANSKA ZLOŽLJIVA STREHA!! !!2 x DVIGALNA OS (1. in 3. os) !!SSR: SCHMITZ – VARNOSTNA STREHA!! !!ŽEPI ZA LATE!! !!ODLIČNO STANJE!! • ABS / EBS • Kolutne zavore Hodpfx Ajzracgjgponu • 3 x vzmetene SCHMITZ 9-tonske osi • Sistem za dvigovanje/spuščanje • 2 dvigalni osi • SCHMITZ – Varnostna streha • zelo dober leseni pod! • Dokumentna torba • Vrata tipa portal na zadnji strani • Sistem za pritrditev tovora, skladno s standardom ISO 12642 – XL • Električni priključek, skladno s standardom ISO 12098 • Predal na levi strani • Notranje mere: 13.620 x 2.490 x 2.800 mm (D x Š x V) • Največja dovoljena masa: 36.000 kg (tehnično možno 39.000 kg!) • Lastna masa: 7.111 kg • Jeklena platišča • Pnevmatike 385/65 R22,5 • Globina profila pnevmatik: 15/14 15/8 8/9 mm - nemška prikolica! - 1 lastnik! - Tehnični pregled / pregled kartice za tahograf: opravljen! Pridržujemo si pravico do sprememb in napak!

Stanje: novo, konfiguracija osi: 3 osi, prostornina tovornega prostora: 24 m³, Oprema: ABS, Schmitz 3-osni kiper 24 m³ z dvižno osjo, pocinkano, z LED lučmi, NOV, za najem. Na preprost pogled: · Prva registracija: Novo vozilo · Letnik proizvodnje: 2026 · Barva: Siva · Barva platnene nadstreška: Siva · Lastna teža: 6.115 kg · Pnevmatike: 385/65 R 22,5 (znamka: Pirelli) · Opomba: Na voljo takoj. Posebna oprema: Hjdpfx Agezfu Siepjnu · MODEL SKI24 SL 7,2, triosna prikolica, jeklena konstrukcija, lahka različica, šasi z nakladalnim koritom, nadgradnja (jeklena polkrožna korita 7,2 / 1460 mm višina stranske stene) · Popolnoma pocinkano podvozje · 24 m³ · LED luči · Dvižna os · SR – dno korita 7,2 v 5 mm debelini · Hidravlični cilindri · Delovna ploščad z dostopom z leve strani · Samodejno spuščanje med nakladanjem · Kolesne zavore 430 mm · Nosilec za lestev + lestev · Podporni vijačni mehanizem proizvajalca JOST (manj zahteven za vzdrževanje) · 1x 15-polni + 2x 7-polni električni priključek · Aluminijasta zračna posoda · Orodjarna · Označitev obrisa · Podporni vijačni mehanizem Jost · Zaščita podvozja, zložljiva · 1 orodjarna · 2 kos. LED – povratne luči, ločeno. Serijska oprema: · 2 klini za podstavljanje s nosilcem · ABS · EBS · Zračna vzmetitev · Mehanizem za dvigovanje in spuščanje z avtomatsko funkcijo ponastavitve · Prikolna kljuka z zapornim vijakom na levi strani v smeri vožnje Pridržujemo si pravico do sprememb zaradi napak, tiskarskih napak in vmesne prodaje. Prodajalec si pridržuje pravico do prekinitve prodaje. _____ Notranja številka za povpraševanja: TR261 _____ STARENT Truck & Trailer GmbH Bruck 49, A - 4722 Peuerbach Kontaktne osebe za prodajo: G. inž. Wimmer Christoph (nemščina, angleščina, češčina, poljščina, italijanščina) p: tudi WhatsApp t: @: G. Mehmet Terzi (nemščina, turščina, angleščina, ruščina, ukrajinščina, boščina, srbščina) p: / tudi WhatsApp t: -104 @: G. Elias Höfler (nemščina, angleščina, bolgarščina, boščina, srbščina) p: / tudi WhatsApp t: -123 @: Govorimo 13 jezikov. Zagotovo tudi vaš. Pišite nam! Spletna stran: / Facebook: / Instagram: / Starent Truck & Trailer GmbH odkupuje vaša gospodarska vozila, kot so vlečne enote, prikolice, tovornjaki in kombiji. Michael Doblhofer (nemščina, angleščina) p: tudi WhatsApp t: -102 @: Bastian Wagner (nemščina, angleščina) p: WhatsApp t: -103 @:

Stanje: rabljeno, največja dovoljena obremenitev: 30.250 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2013, dolžina tovornega prostora: 13.400 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 2.650 mm, Oprema: ABS, Kögel S24-3 Globoko zamrzovalna polprikolica Hlajenje Carrier Vector 1550 / Skupne ure: 23228 h / Skupne dizelske ure: 6565 h Delovanje na dizel in elektriko Zapisovalnik temperature Datacold Vozilo z ojačano toplotno izolacijo in hladilno napravo, razred C Hjdpfx Agou Ddrqjponu Nakladalna dvižna ploščad Bär BC 2000R2T-P4, zložljiva pod podvozje 1 os dvižna BPW osi Pnevmatike 385/65 R 22,5 Shranjevalna skrinja

Stanje: rabljeno, konfiguracija osi: > 3 osi, prva registracija: 01/2008, skupna dolžina: 12.600 mm, skupna širina: 2.550 mm, skupna višina: 1.300 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, barva: drugo, Leto izdelave: 2008, Oprema: ABS, Šasija Višina šasije: 100 cm Premer vlečnega zatiča / sedla: 2 palca Višina vlečnega zatiča / ojnice: 120 cm Nadgradnja Kontejnerska nadgradnja: 20, 30, 40, 45 ft Rezervoar Gorivo: ✓ = Dodatne informacije = Konfiguracija osi Dimenzije pnevmatik: 385/65 R22.5 Znamka osi: Bpwecoplus Zavore: bobnaste zavore Vzmetenje: zračno vzmetenje Os 1: dvižna os; profil pnevmatike levo: 60 %; profil pnevmatike desno: 40 % Os 2: profil pnevmatike levo: 20 %; profil pnevmatike desno: 20 % Os 3: profil pnevmatike levo: 30 %; profil pnevmatike desno: 35 % Os 4: profil pnevmatike levo: 15 %; profil pnevmatike desno: 15 % Teže Dovoljena skupna masa: 41.000 kg Funkcionalno Znamka nadgradnje: D-TEC Identifikacija Registrska številka: C295911 = Podatki podjetja = Hodpfx Agjzida Djpjnu Za več informacij o tej enoti pokličite ali pošljite e-pošto. Celoten pregled zaloge je na voljo na: . Ne pozabite se prijaviti na naš e-novice za tedenske posodobitve o zalogi.

Stanje: novo, največja dovoljena obremenitev: 43.929 kg, skupna masa: 58.000 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 16.690 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 3.570 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer K.SLA R 4 / 2N ? 18/40 Extendable Low Loader with Wheel Wells (NEW) ----Equipment & Highlights Technology & Structure - Extendable low loader with wheel wells - External length: 13,190 mm, platform 9,240 mm + 3,500 mm extension - Platform height only 875 mm for low loading height - Total width: 2,550 mm + 600 mm extension - Unladen weight: approx. 14,071 kg - Permissible total weight: 58,000 kg (at 80 km/h) / 63,800 kg (at 60 km/h) Chassis & Axles - 4 BPW axles: front 2 fixed, rear 2 trailing axles - Lift axle (automatic & manual) - Air suspension with load gauge - WABCO EBS 4S/3M, ABS & RSS - WABCO Smartboard (axle load, suspension, diagnostics) - 16x tires 245/70 R17.5 (M+S & 3PMSF) - Tire pressure monitoring according to R141 Ramps & Loading Area - Foldable 40-ton ramps - Ramp length 2,750 mm, width 850 mm - Hydraulic sliding system - 45 mm hardwood floor plus steel durbar plate over wheel arches Hodpfx Agsx Ix Rqjpenu - Wheel wells and cover bridges included - Digger arm recess at rear Load Securing - Comprehensive lashing points: * 2×2 lashing rings (5,000 daN) & 1×2 lashing rings (10,000 daN) on the gooseneck * 3×2 lashing rings (5,000 daN) & 4×2 lashing rings (10,000 daN) on the platform * 8,000–10,000 daN on the outer frame / well area * 5×2 stake pockets, plug-in stanchions 50×100 mm * Container locks for 1×20 ft or 1×30 ft container Features & Comfort - 1× toolbox (700×400×360 mm) - Stanchion box - Beacon - LED side lights, LED work lights - Wheel chocks - Extension boards with LED - Standard 2" king pin - Metallized chassis (Zn/Al 85/15) for superior corrosion protection - Color: red ----Special Features - New & available immediately - High payload, extremely versatile - Perfect for machine transport, construction machinery, vehicles, etc. - Extremely robust construction, premium BPW components For further information, please feel free to contact us.

Stanje: novo, lastna masa: 7.900 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, obratovalna teža: 7.900 kg, Oprema: ABS, Swan Neck: - Swan neck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood decking Loading Area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Recess in the chamfer and encroaching into the loading area for receiving the excavator bucket stick approx. 2,900 x 750 x 210/290 mm - Cut-outs in the external frame of the loading area for attaching tension straps - Hardwood decking approx. 48 mm thick, over the axles with tread plate covering Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Axles and Tyres: - BPW axles and suspension, 2 axles rigid, 1 axle self-steering t- Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raising and lowering valve - TPMS tyre pressure monitoring system compliant with ECE R 141 - Tyres 235/75 R 17.5 Paintwork: - Complete steel structure blasted automatically by wheel blast machine after welding - Second blasting with corundum for optimal adherence of the coating system - Final coating: two layers of 2K top coat, solid colour in RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and coated in RAL 9010 (Pure White) - Cavity sealing with special wax Electrical System: - Electrical system according to EU standards, 24 volt ASPÖCK-NORDIK (ASS3) lighting - ASPÖCK-UNIBOX at front connection rail with sockets 2x 7-pin & 1x 15-pin Hnedpfxjunrapo Agpju Included Accessories: - Multiple lashing positions - 2" king pin - One galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on galvanized front connection rail - 4 wheel chocks with holders mounted on the front wall - Receiver at rear of swan neck for ALU loading ramps - Galvanised folding supports beneath rear chamfer of loading area - Bracket for beacon at rear of trailer - Galvanised extendable outriggers, extendable by approx. 230 mm per side - White reflector tape to EU spec at sides and rear, red at rear - Brackets for warning signs on left and right of swan neck and rear panel, including socket - ALU side boards and rear board on swan neck, removable, approx. 2,440 x 400 mm - Rear galvanised stake pockets are removable - 2 pairs WADER container pockets in loading area for 20ft container - 6 pairs stake pockets for removable stakes 100 x 50 mm in the outer frame - Adjustable hanging rail for ALU access ramps at the rear of the vehicle - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the loading area chamfer - Sand-finish anti-slip coating painted onto the tread plate on swan neck and loading area - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm with position light - Bracket for beacon fitted to warning boards - 80 km/h speed sticker rear and on both sides - European reflective signs (Red-Yellow) at the rear of trailer - Manual and operating instructions on USB stick - HRM metallisation (High Resistance Metallisation) of the external frame - Complete steel structure shot-blasted, then specified visible surfaces metallised with ZINACOR 850 (Zinc 85% - Alu 15%) hot-finished

Stanje: zelo dobro (rabljeno), konfiguracija osi: 2 osi, prva registracija: 09/2020, barva: rdeča, Leto izdelave: 2020, Oprema: ABS, Rear axle 1: Dual tires Rear axle 2: Dual tires; Steering axle Unladen weight: 8,060 kg Hnjdpfxox Upxxs Agpeu Loading platform height: 86 cm Extendable body: Yes Technical condition: Very good Visual condition: Very good Price: On request FAYMONVILLE F-S42-111A SEMI LOWBED TRAILER 2x SAF axles 1x steering axle (trailing) Tire size Extendable loading platform Length 680 cm + 420 cm extendable, total platform length 1,100 cm Platform width 254 cm Platform height approx. 86 cm Gooseneck length 330 cm Lashing eyes, stake pockets, twistlocks Follow us on Instagram: GEURTSTRUCKS Lowbed trailer built in 2016, but sold as new in 2020 We speak German Hablamos Español We speak English

Stanje: rabljeno, lastna masa: 6.341 kg, največja dovoljena obremenitev: 29.659 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2021, naslednji pregled (TÜV): 09/2025, dolžina tovornega prostora: 13.639 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.955 mm, prostornina tovornega prostora: 99 m³, vzmetenje: zrak, velikost pnevmatike: 435 / 50 R 19,5, barva: srebrn, vrsta prenosa: drugo, velikost sprednje pnevmatike: 435 / 50 R 19,5, velikost zadnje pnevmatike: 435 / 50 R 19,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, Base colour: silver Equipment extras: Hnodpevhtmzsfx Agpsu ABS, EBS, air suspension, disc brakes, suspension: air-lift, payload (kg): 29,659 Body type: jumbo trailer, L x W x H 13,630 x 2,480 x 2,955 mm, galvanised subframe, Schmitz axles with air suspension featuring lifting and lowering, disc brakes, 1st axle is a lift axle, sliding curtain on both sides (neutral), lifting roof, Edscha system, aluminium insert slats, RSAB

Stanje: rabljeno, največja dovoljena obremenitev: 38.170 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2015, dolžina tovornega prostora: 13.085 mm, širina tovornega prostora: 2.550 mm, skupna dolžina: 13.300 mm, skupna širina: 2.550 mm, skupna višina: 3.700 mm, Leto izdelave: 2015, Oprema: ABS, ES-GE 3-osni prikolica s podaljšanimi osmi | Teleskopsko podaljšljiva | Niše za kolesa | Aluminijaste rampe | Dviga/usmerjevalna os Opis Prodajamo kakovostno in izjemno prilagodljivo ES-GE 3-osno prikolico s podaljšanimi osmi, proizvedeno v letu prve registracije. Prikolica izstopa zaradi obsežne dodatne opreme, ki omogoča maksimalno prilagodljivost pri transportu težkih gradbenih strojev, viličarjev, bagrov in kontejnerjev. Zahvaljujoč teleskopski tovorni plošči in vgrajenim nišam za kolesa in bagre je prikolica pripravljena za skoraj vsako nalogo. Podatki o vozilu in teže: * Prva registracija: 21.08.2015 * Dovoljena skupna masa: 48.000 kg * Obremenitev osi: 30.000 kg (3 x 10.000 kg) * Obremenitev sedla: 18.000 kg * Višina sedla: 0,95 m Mere in podvozje: * Skupna dolžina: približno 13.085 mm (teleskopsko podaljšljiva do največ približno 4.060 mm) * Dolžina tovorne plošče / višina: približno 8.750 mm / približno 860 mm (obremenjena) * Širina: približno 2.550 mm (razširjena z galvaniziranimi nosilci na približno 3.000 mm) * Šasi: Visoko trdna finozrna jekla (primerna za točkovno obremenitev 30 t na 4 m) * Talna obloga: Robustna talna obloga iz trdega lesa (približno 38 mm), protidrsna pločevina nad osjo * Barva: Enobarvna, RAL 5010 modra, platišča srebrne barve Hodpfxoz Edhqe Agpjnu Podvozje in osi: * Osi: 3 x 10.500 kg osi Gigant, z vzmetenjem na zračni blazin, z dvigom in spuščanjem * 1. os: Izvedena kot dvigajna os * 3. os: Izvedena kot sledilna usmerjevalna os * Zavorni sistem: Dvovodni zavorni sistem (ABS-EBS), Knorr-zavore TIMG2 (pametna plošča) * Pnevmatike: 12-krat, 235/75 R 17,5 * Ostala višina profila pnevmatik: 1=80 % 2=60-80 % 3= 30-60 % Dodatna oprema in prednosti: * Rampe: 1 par dvodelnih aluminijastih ramp (približno 2.900 + 1.450 x 600 mm), hidravlično dvigalne in spuščalne, mehansko premikljive (nosilnost približno 15.000 kg/kos) * Niše za kolesa: 2 para niš za kolesa v podaljšku, vključno z ustreznimi aluminijastimi pokrovi * Niša za bager: Vgrajena niša za bager na zadnji strani med osmi (približno 650 x 2.000 x 300 mm) * Zaklep za kontejner: 2 para na tovorni plošči (za 2 x 20' in 1 x 40' kontejner), 1 par na "gosi" in 1 izravnalni opornik za sprednjo nišo za kolesa * Optimizacija teže: Sprednje opore in rezervoar za zrak iz lahkega aluminija namesto jekla * Varovanje tovor: 9 parov žepov za pritrdilne palice v zunanjem okviru, 1 vrsta žepov za pritrdilne palice na "gosi", številne vrtljive pritrdilne točke (6 t WLL / 12 t LC) * Osvetlitev in varnost: LED zadnje luči, LED stranske luči, 2 LED luči za vzvratno vožnjo, 4 izvlečne LED luči za razširitev (do približno 4.500 mm širine), vključno z nočnimi signalizacijskimi ploščami * Zaščita pred korozijo: Kakovostna obdelava s cinkovo prašno podlago (90 %) po DIN/ISO 12944 * Pnevmatski sistem: Spojke v udobni izvedbi ?DUOMATIC? Vozilo je v stanju, da ga lahko takoj uporabljate. Prodaja poteka ob sedežu podjetja. Za dodatna vprašanja, podrobnejše slike ali dogovor o terminu ogleda smo vam z veseljem na voljo! Nove glavne tehnične preglede/varnostne preglede ali spremembe teže (zmanjšanje/povečanje) lahko izvedemo na zahtevo. Z veseljem vam pomagamo pri pridobitvi izvoznih/tranzitnih tablic, prav tako je možen transport kupljenih vozil po Nemčiji. Pišite nam! Govorimo naslednje jezike: nemščina, angleščina in ruščina! Ne odgovarjamo za tiskarske in pisne napake, spremembe, medprodajo in napake. Kdo smo mi? Leible Nutzfahrzeuge je družinsko podjetje s sedežem v Kehlu ob reki Ren. Zarad

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for maneuvering purposes switched to the first axle via EBS (no installation required on the truck side) * Rear axle as self-steering axle with electro-pneumatic steering lock * Locking of the self-steering axle from the driver's cab for maneuvering purposes, controlled via EBS (no installation required on the truck side) ----Suspension: * Air suspension with lifting/lowering device and Ride-to-Return valve ----Electrics / Lighting: * Smart Board mounted on the trailer as an information tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12/24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at rear for extended length lighting * Side marker lights with indicator signal control * Tyre pressure monitoring system with display option in the truck via EBS signal (no installation required on the truck side) ----General equipment: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swing arm as carrier for connecting cables from truck to semi-trailer ----Low loader deck: * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and front tool box made of galvanized powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high aluminium side boards (in RAL colour of choice) on the sides of the fifth wheel platform, foldable and removable Hnedpfx Aoq Euaksgpou * Rear wall -150 mm- high plug-in * Rear slope on fifth wheel platform to low bed approx. 700 mm long with tread plate covering and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and low bed platform with 60 mm clamped wooden planks * Tear plate above the axles * 9 x mechanical folding extensions to 3 m overall width, but not in the rear slope (extension planks available with closed storage compartment across the direction of travel under the loading floor) * 3 mounting shafts under the fifth wheel platform for storage of optional aluminium loading ramps or wooden planks for wheel well coverings ----Load securing (LaSi package): Fifth wheel platform: * Perforated outer frame angled at 45° with hole pattern for lashing points (2 t lashing capacity per point at a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings each side recessed in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the drop, 1 x above the centre axle next to the longitudinal beam) Low loader platform: * 3 x 13.4 t lashing rings each side on the outer frame (1 x beginning of the drop on the fifth wheel platform, 1 x beginning of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings each side (1 x between front wheel well and 1st axle, 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings each side bolted to the outer frame of the wheel wells (2 on the front wheel well, 1 on the rear wheel well) ----Excavator arm recess: * Extended excavator arm recess from end of last fixed axle through to steering axle up to rear crossmember, continuous with

Stanje: novo, največja dovoljena obremenitev: 28.860 kg, skupna masa: 37.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes * 3 x 11 t axles * Air suspension with lift and lower function, including RtR valve * Start assist for shunting, applied to first axle via EBS – no truck-side installation – when lift axle is raised +30 mm ride height * Smart-Board installed on trailer as an info tool, with pressure sensors for total axle load indication * Rear axle as self-steering axle with electro-pneumatic steering lock * Steering lock for trailing axle controlled from driver’s cab for maneuvering purposes via EBS (no truck-side installation) * 2" king pin * 1 lift axle * Side underrun protection * Front aluminium drop support legs and rear swing-down supports on chassis * Alcoa LVL One aluminium wheels * 15-pin electrical connector * LED lighting 12/24 V * Removable rear LED beacon Hodpfowh Hdxex Agpjnu * 2 additional LED reverse lights * 2 LED work lights mounted on trailer sides – no truck-side installation * 7-pin power socket at rear for overlength lighting * Side marker lamps with indicator activation * Tyre pressure monitoring system with display in truck via EBS signal (no truck-side installation) * Mechanically adjustable warning sign sets front and rear * Straight steel fenders * Saddle platform with 45° bevelled front corners and front toolbox made of galvanized, powder-coated steel sheet (B = 2,480 x H = 500 x L = 665 mm), top hinged lid and side doors at the beveled corners * 400 mm aluminium side boards (RAL 9010 pure white) fold-down and removable, mounted laterally on the saddle platform * Rear wall –150 mm– slotted in * Tapered rear on the saddle platform to lowbed approx. 700 mm long with chequer plate covering and lashing bar at end for attaching aluminium ramps * Saddle and lowbed platform with 50 mm clamped wooden planks * Tear plate above the axles * Prepared for 3 mounting shafts under the saddle platform for optional aluminium ramps storage * Swing arm as a carrier for connection lines from truck to trailer * Load securing package consisting of: outer frame of the saddle platform with punched holes, 45° bent and hole-pattern for lashing devices (2 t lashing force per point, min. 480 mm spacing), side-mounted 2 x 6.3 t recessed lashing rings per side, 1 x 16.5 t lashing ring per side at incline from lowbed to saddle platform, 2 pairs 16.5 t lashing rings in lowbed (1x on longitudinal beams after the step, 1x above the centre axle beside longitudinal beam), side 3 x 13.4 t lashing rings per outer frame (1x at start of platform step, 1x start of ramp slope, 1x end of ramp slope), 3 x 10 t each side (2x between front wheel recess and 1st axle, 1x between 2nd and 3rd axle), 3 x 5 t per side screwed to the wheel recess outer frames (2 at front, 1 at rear recess) * Extended excavator arm trough from end of last rigid axle over steering axle to end cross member, continuous with internal reinforcement profile approx. W = 770 mm x D rear = 270 / D front = 170 mm; each side 2 x 6.4 t lashing rings in the arm trough * Each side two wheel recesses, 390 mm deep and 640 mm wide for transporting wheel loaders with wheelbase 3,000–3,590 mm, tyre diameter up to 1,760 mm – retractable covers – * Second retractable cover ...