Müller-Mitteltal Ets-Ta-B 10,7 nakup rabljenega (34.000)

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Centre axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Toolbox made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) Nwedpfspk D Iijx Aibef * Storage box for container nets, made of galvanised sheet steel (W: 960 mm x H: 300 x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear crash protection buffers * Mechanical rear support legs ----Container / Low-loader Platform: * Hot-dip galvanised main frame with raised outer frame (approx. 25 mm raised) to guide rolling containers * Steel floor with roll recesses in the bogie area * For roll-off container transport: container lengths from 5,500 – 7,000 mm possible * Pneumatic 4-point clamp locking as well as mechanically insertable end stops at the front of the guide tracks * Load securing certificate to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * 8 repositionable skip stops for lateral centring of the skips, front 4 skip stops inserted with pendulum stops ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements to secure skips in both friction-fit and positive-locking manner * 4 lashing bars in cloverleaf design (on sides) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Welded anti-slip strip in the running area of the ramp incline * 1 pair aluminium approach ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment at rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload: 18,900 kg ----Finish: * Side and rear reflective contour marking * Axles, turntable, drawbar, and air tanks painted in black * Hot-dip galvanised main frame ----Info: * Technical gross weight of up to 27,000 kg possible * New vehicle without initial registration, with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 20/2026

Stanje: rabljeno, največja dovoljena obremenitev: 12.080 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2024, dolžina tovornega prostora: 3.900 mm, širina tovornega prostora: 1.920 mm, višina nakladalnega prostora: 415 mm, Leto izdelave: 2022, Oprema: ABS, * ETM-TA 14.4: ----Brakes: * Wabco ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange towing eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolt-on towing eye ----General attachments: * Jost landing gear at the front * Side underrun protection Nwedpfx Asl Th Eysibjf * Foldable A-panel at the rear ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----Superstructure: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding plate cover 750 x 1,000 mm at the front incl. 2 removable skip stops, front in 2 positions * Rear cross member for attaching aluminium ramps, incl. 2 additional drop-down supports at the rear ----Loading edge: * Unloaded loading edge approx. 710 mm ----Load securing: * 4 removable skip stops, can be inserted into 2 positions for lateral centring of the skips * On each side: 1 x (13.5 t) UVV lashing point for attaching tensioning devices * 2 ratchet tensioners (spindle adjustment) with compensating chain and quick-shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paintwork: * Chassis, front wall, side walls, mudguards, drawbar, rear drop supports hot-dip galvanized * The axles, springs, landing gear, and air tank painted in a black tone ----General information: * Vehicle has a one-day registration in 06/2024, due to missing tyre pressure monitoring system it has not been loaded/used * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf on the A7

Stanje: rabljeno, največja dovoljena obremenitev: 10.870 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2023, Oprema: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizing aggregate * Drawbar height adjustable by approx. 300 mm with 40 mm flange towing ring * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm, mounted on the front right side of the chassis * 15-pin electrical connector * Multi-chamber tail lights * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks located in the central locking storage areas, plus 2 on the front wall Nedpfx Aijl Th Htsbswf * Chassis made of fine-grain steel * Steel pallet 3-way tipper body with continuous side walls, upper section reinforced with internal tube, without central stakes, fold-down sides with drop-side spring assist * Rear stakes bolted * Combination steel double-wing rear doors, asymmetrically split, can be swung and locked at 270°, not foldable, with additional pivot frame for automatic rear door opening during tipping, locking by galvanized rotary bar lock at the rear and central locking, deactivation function for the automatic rear door when reversing with open swing doors * Each corner with 1 x 5 t lashing point, plus 4 x 3 t recessed lashing rings per side in the outer frame * 4 mm fine-grain steel floor plate * Rear guide rails for loading ramps * Reinforced body with load securing certificate * 1 pair of aluminium ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment for ramps recessed under the loading area at the rear * Chassis, drawbar, underrun protection, rear stake, rear folding supports hot-dip galvanized * Axles, suspension, air tank, and landing gear painted in black * Tires: 285/70 19.5 * Sideboard paint finish in RAL 9010 pure white * Additional color options for side walls in RAL colors available at extra cost * Vehicle has a day registration (not in use) * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 12.080 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2024, dolžina tovornega prostora: 3.900 mm, širina tovornega prostora: 1.920 mm, višina nakladalnega prostora: 415 mm, Leto izdelave: 2022, Oprema: ABS, * ETM-TA 14.4: ----Brakes: * Wabco ABS braking system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: Nsdpfx Aijl Th Dmsbewf * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolt-on drawbar eye ----General Attachments: * Jost landing gear at the front * Lateral underrun protection * Foldable A-frame shield at the rear ----Electrics / Lighting: * 15-pin power socket * Multi-chamber taillights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding steel plate support 750 x 1,000 mm at the front, incl. 2 interchangeable skip stops at the front, plug-in at 2 positions each * Rear crossmember designed for aluminum loading ramps, incl. 2 additional drop-down supports at the rear ----Loading Edge: * Unloaded loading height approx. 710 mm ----Load Securing: * 4 repositionable skip stops, can be placed in 2 positions for lateral centering of skips * Each side with 1 x (13.5 t) UVV tie-down point for securing lashings * 2 ratchet tensioners (spindle adjustment) with balancing chain and quick shortener (tension force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paint / Finish: * Chassis, front wall, side walls, mudguards, drawbar, rear drop supports hot-dip galvanized * Axles, springs, landing gear, and air tanks painted in black ----General Information: * Vehicle has a day registration from 06/2024 due to missing tire pressure monitoring system and has not been loaded/used * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf on the A7

Stanje: rabljeno, največja dovoljena obremenitev: 10.870 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2023, Oprema: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release system for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles Nedol Th Duopfx Aibowf * Parabolic springs with tandem equalizer unit * Drawbar adjustable in height by approx. 300 mm with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm front right side on the chassis * 15-pin power socket * Multi-chamber tail lights * Bolted underrun protection * Plastic quarter mudguards * Net hooks installed at each locking point of the central locking system, plus 2 hooks on the front wall * Chassis made of fine-grained steel * Steel pallet three-way tipper body with continuous side walls, internal tube reinforcement, no center posts, foldable with drop-side spring assist * Rear posts bolted * Combination steel wing-door tailgate, asymmetrically split with 2 leaves, can be swung and locked to 270°, not foldable; with additional pendulum frame for automatic tailgate opening during tipping, rear locking with galvanized rotary bolt and central locking system, deactivation function for automatic tailgate function when tipping backwards with open wing door * Each corner fitted with 1 x 5 t lashing ring, and each side with 4 x 3 t lashing points recessed in the outer frame * 4 mm fine grain steel floor plate * Rear mounting rail for loading ramps * Reinforced structure with cargo securing certificate * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment from the rear, recessed under the loading area in the chassis for storing the ramps * Chassis, drawbar, underrun protection, rear post, and rear folding supports galvanized * Axles, springs, air tank, and landing gear painted black * Tires 285/70 R 19.5 * Drop-sides painted RAL 9010 pure white * Sidewall painting available in an RAL color of your choice for an additional charge * Vehicle has day registration (unused) * Subject to errors and prior sale * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 14.400 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 19.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release mechanism for spring-loaded cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering system Nwodpfemi Tmaox Aibsf * Drawbar with 50 mm flanged towing eye and height adjustment of 110 mm via offset plate * Jost support winch at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * Multi-chamber tail lights * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood flooring, clamped version * Preparation in front of the bulkhead for subsequent installation of container locks * Bolted front bulkhead made of smooth sheet metal * Split side walls made of trapezoidal-profile steel sheet, foldable, with folding stanchion in the middle * Steel rear wall, insertable between the ramps; stowage fixture in front of the bulkhead when not in use * Bolted rear stakes * Perforated outer frame approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option to fit 3 t drop lashing rings every 600 mm * Load securing package: in each front and rear corner 1 x 10 t UVV lashing ring, 2 x 8 t retractable UVV lashing rings per side in the outer frame, various holes in the front and rear crossmember for 1.2 t lashing options * One-piece slide-in ramps, 12 t per pair, approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm * Chassis, drawbar, front wall, tailgate, folding supports and loading ramps hot-dip galvanized * ---Axles, air tanks, flanged towing eye, and support winch painted in black--- * Loading height unladen approx. 940 mm * Loading height laden approx. 910 mm * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 14.400 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 19.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering system * Drawbar with 50 mm flange towing eye and height adjustment of 110 mm via offset plate * Jost landing gear at the front * External folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * Multi-chamber rear lights * Reinforcement package for drilling rig transport on chassis * 50 mm softwood floor, clamped version * Fixture in front of the bulkhead for subsequent installation of container locks * Bolted bulkhead made from smooth steel sheet * Split steel sidewalls - trapezoidal profile - foldable with central folding stake * Steel rear wall, slidable between ramps - interior mounting bracket for storage when not in use, in front of the bulkhead * Bolted rear stanchions * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Possible to install 3 t folding lashing brackets every 600 mm * Load securing package: at each front and rear corner 1 x 10 t UVV-rated lashing ring, on each side 2 x 8 t UVV-rated retractable lashing rings in outer frame, various holes in front and rear crossmembers for 1.2 t lashing options * One-piece sliding ramps 12 t/pair, approx. 2,750 x 620 mm * Rear drive-on bevel approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, folding supports, and drive-on ramps hot-dip galvanized * ---Axles, air reservoirs, flange towing eye, and landing gear painted black--- * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale excepted Nodpemi Tcqefx Aibswf * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes Nodpfjl Thy Rsx Aibewf ----Axles: * 2 x 5.5 t Gigant axle assemblies ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, approx. 300 mm * 40 mm flange drawbar eye ----General Attachments: * Jost mechanical landing gear, front * External, hot-dip galvanized folding supports, rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted on front wall outside ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 15-pin power connector * LED tail lights ----Loading Platform: * 50 mm softwood floor * 20'' container locks mounted at front and rear * Bolted smooth steel front wall * Drop sides, steel, trapezoidal profile, drop-down with drop-side lifting springs * Hot-dip galvanized, bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing brackets every 600 mm (5 lashing rings fitted each side) * 1 x 6.3 t lashing ring fitted in each corner front and rear * Various holes in front and rear transverse beams for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear storage compartment integrated in the chassis below the loading area ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Drop side color in RAL 9010 pure white * Side panels can be painted in a RAL color at extra cost ----Info: * New vehicle without registration * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle units ----Suspension: * Parabolic springs with balancing unit ----Drawbar / Flange Eye: * Drawbar height adjustable by approx. 300 mm * 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at front * Bolt-on, hot-dip galvanized folding supports at rear (external) * Side underrun protection * Plastic quarter mudguards * Plastic toolbox on front right, externally mounted on front wall ----Electrics / Lighting: * Tyre pressure monitoring system (TPMS) * 15-pin power connector * LED tail lights ----Load Area: * 50 mm softwood floor * 20" container locks mounted at front and rear * Bolted bulkhead made of smooth steel sheet * Drop sides made of trapezoidal-profile steel sheet, foldable with sideboard spring lifter * Hot-dip galvanized bolted rear stanchions ----Load Securing: * Perforated outer rail, edged at approx. 45°, with lashing capacity of 2 t every 480 mm * Optional 3 t folding lashing brackets every 600 mm (five lashing rings mounted per side) * One 6.3 t lashing ring in each corner, front and rear * Various bores in front and rear crossmembers for 1.2 t lashing points Nwodpol Tilxjfx Aibsf ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear storage compartment recessed into the chassis frame under the loading area ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Sideboard colour in RAL 9010 pure white * Painting of side walls in a RAL colour of choice available at extra charge ----Information: * New vehicle, not registered * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.650 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2025, * KA-TA-R 11.9 Masterline ----Braking system: * Wabco EBS * Emergency release system for spring-loaded brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar (300 mm adjustment range) with 40 mm flanged towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * Multivoltage Nwedsq Euagjpfx Aibsf * 15-pin electrical connector * 13-pin auxiliary cable (12 V) * Extended connection cables for forestry and agricultural towing vehicles * LED rear lights ----General attachments: * Mechanical support winch front * Rear: 2 mechanical foldable supports * Plastic toolbox, right side * 2-step entry, front left (in the direction of travel) * Bolt-on underrun protection * Plastic quarter mudguards ----Tipper body: * Mesh hooks on the sides and rear in the central locking supports, plus 2 on the front wall * Steel pallet tipper body (3-way tipper; full-length side walls—without center stanchions—with drop sides featuring sideboard spring assistance, rear tailgate foldable and swinging, with manual central locking) * 4 mm steel floor plate * Mounting rail at the rear for loading ramps ----Load securing: * Each corner: 1 x 5 t lashing ring * Each side: 4 x 3 t lashing points recessed into the outer frame ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (carrying capacity 8 t per pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps recessed under the cargo bed within the chassis from the rear ----Tyres: * Tyres: 385/55 R 19.5 ----Paint / Coating: * Chassis, drawbar, tipper body, front wall, sideboards, foldable supports, and rear stanchions hot-dip galvanized * Axles, springs, air tanks, flanged towing eye, and support winch painted in black * Sideboards are hot-dip galvanized ----Info: * Structure reinforced with EN 12642 XL load securing certificate * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.650 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2025, * KA-TA-R 11.9 Masterline ----Braking System: * Wabco EBS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic suspension with tandem equalizer ----Drawbar / Flange Eye: * Height-adjustable drawbar (300 mm) with 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * Multivoltage * 15-pin power connector * 12 V 13-pin auxiliary cable * Extended connection cables for forestry and agricultural tractor units * LED tail lights ----General Attachments: * Mechanical landing gear at the front * 2 mechanical foldable supports at the rear * Plastic tool box mounted on right side * 2-step boarding step, front left in direction of travel * Bolted underrun protection Njdpfol Thw Iex Aibswf * Plastic quarter mudguards ----Tipper Body: * Net hooks on the sides and rear, located in the central locking mounts, as well as 2 units on the bulkhead * Steel pallet - 3-way tipper body (continuous side walls – without central stanchions –, foldable with drop side spring assist, tailgate foldable and swinging via manual central locking) * 4 mm steel floor plate * Rear ramp mounting track ----Load Securing: * Each corner equipped with 1 x 5 t lashing point * Additionally, 4 x 3 t lashing rings recessed into each outer frame ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps recessed under the loading area in the chassis, accessible from rear ----Tyres: * Tyres 385/55 R 19.5 ----Paintwork: * Chassis, drawbar, tipper body, bulkhead, drop sides, folding supports and rear stanchions hot-dip galvanized * Springs, air tanks, flange towing eye and landing gear painted in black * Drop sides hot-dip galvanized ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * RAK 18.0 External Roller with Rear Tipping Function ----Brake System: * Wabco EBS-E (electronic brake system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * BPW Eco Plus axles ----Suspension: * Air suspension (automatic lowering when the brake is disengaged) ----Drawbar: * Pneumatically lowerable drawbar approx. 2,100 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle ----General Attachments: * Plastic toolbox – approx. 858 x 500 x 500 mm – mounted on the right side * Enclosed plastic mudguards front & rear axles * Enclosed side underrun protection * Rear underrun protection bolted * Storage box for container nets made of galvanized perforated sheet approx. 1,000 x 500 x 500 mm * Foldable "A"-sign at the rear * Rear impact protection buffers ----Electrics / Lighting: * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * 15-pin 24V power connector * LED lighting system for 12 & 24V * Two additional LED reversing lights * TPMS (Tire Pressure Monitor System) ----Suitable for Container Lengths: * suitable for containers from 6500mm to 7000mm ----Container Running Surface / Tipping Bridge: * External roller guide through flat steel rails with a clear width of approx. 2,180 mm combined with three lateral centering pieces on each side for container guidance * To support and stop the container rollers, two rear, recessed, tipping frame-mounted roller bearings with pneumatically operated longitudinal securing are supplied * The positive locking of roll-off containers is accomplished via a front-installed, externally controlled, pneumatic cross clamping unit (one-sided operation) * Inner chassis with rearward-tipping main frame - engine hydraulically powered tipping device (single-cylinder design) * Tipping angle 42° * Rubber pads between chassis and tipping frame * Containers are loaded from the front, hot-dip galvanized chassis ----Tyres: * Single tyres 385/55 R 22.5 ----Loading Height: * Unladen approx. 1,270 mm ----Paintwork: * Underrun protection and locking parts (without final coat) * Bogie, air tanks, axles, slewing ring and drawbar painted in black tone Nwjdpox Ipbmjfx Aibjf * Hot-dip galvanized ----Information: * For container transport according to DIN 30722 Part 1 * New vehicle without initial registration with manufacturer's warranty * Subject to errors and prior sale * Sample images (vehicle images may differ due to optional equipment) ----Delivery Time: * Available from week 24/2026

Stanje: novo, največja dovoljena obremenitev: 8.850 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem compensating unit Nwodpfxel Thyxe Aibjf ----Drawbar / Flange Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flange eye ----General Fittings: * Jost mechanical landing gear at front * Rear: 2 mechanical, hot-dip galvanized drop-down support legs * Plastic toolbox approx. 750 x 350 x 300 mm, fitted on right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS tire pressure monitoring system ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking fixtures, plus 2 at the front wall * Steel pallet, 3-way tipping body (continuous sidewalls – without center stanchions – foldable with drop side spring assistance) * Rear stanchions bolted * Combination steel double rear doors, asymmetrically split, can be swung open and locked at 270°, not foldable – with additional pendulum frame for automatic tailgate opening during tipping operation; locking via galvanized swing bolt locking and central locking system * Deactivation function for automatic rear wall opening when tipping backwards with open door * 4 mm steel floor plate * Rear ramp carrier rail for drive-on ramps ----Load Securing: * 1 x 5 t lashing point in each corner * 4 x 3 t recessed lashing rings per side, fitted in the outer frame ----Ramps: * 1 pair of aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for vehicles on rubber tires & tracks * Lockable storage compartment for ramps under the loading platform, integrated into the chassis ----Paint Finish: * Drawbar, front wall, tipping platform, rear stanchions, underrun protection, and mechanical support legs hot-dip galvanized * Sidewalls and tailgate painted RAL 9010 pure white * Sidewall painting in any RAL color available at extra charge * Axles, springs, flange eye, air tank, and landing gear painted in a black tone ----Information: * Body reinforced with load securing certificate according to EN 12642 XL * New vehicle without initial registration, with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available ex-works Egestorf on A7

Stanje: novo, največja dovoljena obremenitev: 8.850 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem load equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, on the right-hand side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS tire pressure monitoring system ----Tipper Body: * Net hooks at sides and rear in the central locking compartments, as well as 2 units on the front wall * Steel palletized 3-way tipper body (continuous side walls—without central stanchions—foldable with board spring-lifter) * Rear stanchions bolted * Combination steel double-wing rear doors, asymmetrically divided, can be opened and locked at 270°, not foldable—with additional swinging frame for automatic rear tailgate opening during tipping process; locking via galvanized locking rods and central locking * Deactivation function for automatic rear tailgate operation when tipping backwards with open wing door * 4 mm steel chequer plate floor * Rear mounting rail for loading ramps ----Load Securing: * One 5 t lashing ring per corner Nwjdpfxjl Thymo Aibof * Four 3 t lashing rings each side, recessed into the outer frame ----Ramps: * 1 pair aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment beneath the loading area, integrated into the chassis ----Paintwork: * Drawbar, front wall, tipper body, rear stanchions, underrun protection, and mechanical supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Side wall painting in other RAL color shades available for an additional charge * Axles, springs, flange eye, air tanks, and landing gear painted in black ----Information: * Reinforced body with cargo securing certificate according to EN 12642 XL * New vehicle, without initial registration, with manufacturer’s warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex works Egestorf on the A7 Motorway

Stanje: novo, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, RAK 18.0 External Roller with Rearward Tipping Function ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axle: * BPW Eco Plus axles ----Suspension: * Air suspension (automatic lowering when disconnecting the brake) ----Towing Bar: * Pneumatically lowerable drawbar, approx. 2,100 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle ----General Attachments: * Plastic toolbox - approx. 858 x 500 x 500 mm - mounted right side * Enclosed plastic mudguards front & rear axle * Enclosed side underrun protection * Bolt-on rear underrun protection * Storage box for container nets made of galvanized perforated sheet, approx. 1,000 x 500 x 500 mm * Foldable A-board at the rear * Rear impact protection buffers ----Electrical / Lighting: * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * 15-pin 24V power connector Nodpfxjx Ipa Aj Aibjwf * LED lighting system for 12 & 24V * 2 additional LED reverse lights * RDÜ tire pressure monitoring system ----Suitable for Container Lengths: * For containers 6,500 mm to 7,000 mm ----Container Running Surface / Tipping Platform: * External roller guidance through flat steel limits at approx. 2,180 mm clear width, in combination with 3 centering pads per side for container guidance * For accommodating and supporting the container rollers, there are 2 recessed, tipper frame-connected roller mounts at the rear, with pneumatic safety lock against longitudinal movement * The positive locking of the roll-off containers is by a pneumatic cross-clamping unit (operable from one side), installed at the front of the tipping frame and accessible externally * Chassis frame with internally rearward-tipping main frame - hydraulically operated tipping unit (single-cylinder design) * Tipping angle 42° * Rubber pads between chassis and tipping frame * Loading of containers from the front; hot-dip galvanized chassis ----Tyres: * Single tyres 385/55 R 22.5 ----Loading Height: * Unladen approx. 1,270 mm ----Paintwork: * Underrun protection and locking parts (unfinished, without top coat) * Bogie, air tanks, axles, slewing ring, and drawbar painted in black * Hot-dip galvanized ----Information: * For container transport according to DIN 30722 Part 1 * New vehicle, no initial registration, with manufacturer warranty * Subject to errors and prior sale * Sample photos (vehicle images may vary due to special equipment) ----Delivery Time: * Available from CW 24/2026

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 2.140 kg, največja dovoljena obremenitev: 12.260 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, vzmetenje: jeklo, velikost pnevmatike: 285/ 70 R 19,5, medosna razdalja: 1.140 mm, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, - TM-TA 14.4: - incl. 2 ratchet tensioners permanently mounted on the outer frame with chain box, each side with eyelet and quick shortener, Y-special design, 6.3 t - Tension force with load securing certificate - Wabco EBS - RDÜ tire pressure monitoring system - Emergency release device for spring actuators - Drum brakes - 2 x 7 t Gigant axles - Parabolic springs with equalizing unit - Jost landing gear at the front - 2 external drop-down support legs at the rear Nwedpfoxuhy Eox Aibef - Height-adjustable, hot-dip galvanized drawbar +/- 150 mm - Hot-dip galvanized chassis - 15-pin power connector - LED tail lights - Closed single plastic mudguards - Folding A-sign at the rear - Plastic collision protection buffers on the underride guard - Hot-dip galvanized underride protection with integrated chain storage boxes (W=370 mm x D=420 mm x H=480 mm) front left & right - 2 repositionable skip stops for lateral centering of skips - Skip stops at the front with pendulum stops, insertable in 4 positions - On each side, 2 x 5.3 t UVV lashing rings for attaching tie-down elements - Axles, springs, air tanks, and landing gear painted in black - Subject to errors and prior sale - New vehicle with manufacturer’s warranty - Available from week 05/2026

Stanje: skoraj kot novo (rabljeno), največja dovoljena obremenitev: 14.400 kg, skupna masa: 12.080 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.900 mm, širina tovornega prostora: 1.920 mm, višina nakladalnega prostora: 415 mm, vzmetenje: parabolično listje (vzmet), velikost pnevmatike: 285/70R19.5, medosna razdalja: 1.140 mm, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2022, - ETM-TA 14.4: - Wabco ABS braking system - Emergency release system for spring-loaded cylinders - Drum brakes, 2 x 7 t Gigant axles - Parabolic springs with tandem balance unit - Height-adjustable drawbar (+/- 150 mm) with 40 mm bolt-type towing eye - Jost landing gear at front, side underrun protection - Foldable A-panel at rear - 15-pin electrical connector, multi-chamber tail lights - Fixed steel front and side walls - Removable steel tailgate Nodpexvbcpofx Aibewf - Floor made of 50 mm softwood - 1 sliding wear plate 750 x 1,000 mm in the front area incl. 2 drop-in skip stops at the front, adjustable in 2 positions - 4 repositionable skip stops, adjustable in 2 positions, for lateral centering of containers - 1 x (13.5 t) UVV lashing eye per side for attaching tensioning elements - 2 ratchet tensioners (spindle adjustment) with equalizing chain and quick-shortener (tension force 6,300 kg) - Rear crossmember for attaching aluminium loading ramps incl. 2 additional rear drop legs - Loading edge (unladen): approx. 710 mm - Chassis, front wall, side walls, mudguards, drawbar, and rear drop legs hot-dip galvanized - Axles, springs, landing gear, and air reservoir painted black - Tyres: 285/70R19.5 - Wheelbase: 1,140 mm - Loading edge (unladen): approx. 710 mm - Colour: hot-dip galvanized - Vehicle with one-day registration (06/2024), not loaded/used due to missing tyre pressure monitoring system - New vehicle with manufacturer's warranty - Errors and prior sale excepted - Immediately available ex Egestorf on the A7

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 2.140 kg, največja dovoljena obremenitev: 12.260 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 285/ 70 R 19,5, medosna razdalja: 1.140 mm, Leto izdelave: 2026, - TM-TA 14.4: - Wabco EBS (Electronic Braking System) - RDÜ Tire Monitoring System - Emergency release device for spring brake cylinders - Drum brakes - 2 x 7-ton Gigant axles - Parabolic springs with compensation unit - Jost landing gear at the front, 2 x external drop-down supports at the rear - Height-adjustable +/- 150 mm hot-dip galvanized drawbar - Hot-dip galvanized chassis - 15-pin power connector - LED tail lights - Enclosed single plastic mudguards - Foldable A-sign at the rear - Plastic impact bumpers on underrun protection - Hot-dip galvanized underrun protection with integrated chain compartment B = 370 mm x D = 420 mm x H = 480 mm, front left & right - 2 repositionable skip stops for lateral centering of the skips - Front skip stops with 4-position swing-type bolts - Each side with 2 x 5.3-ton UVV lashing rings for attaching tensioning devices - Axles, springs, air tanks, and landing gear painted in black - Subject to errors and prior sale Njdpfxexu Hplo Aibowf - New vehicle with manufacturer's warranty - Available from CW 05 / 2026

Stanje: novo, največja dovoljena obremenitev: 9.070 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.010 mm, višina nakladalnega prostora: 325 mm, Leto izdelave: 2025, * ETS-TA-B 11,9: * Wabco EBS (elektronisches Bremssystem) * RDÜ (Reifendrucküberwachung) * Trommelbremsen, 2 x 5,5 t Gigant Achsen * Parabelfedern mit Ausgleichsaggregat * Zugrohr höhenverstellbar um 300 mm * BPW Stützwinde * Mechanische Fallstützen hinten * Kunststoff-Werkzeugkasten vorn rechts an der Stirnwand * Seitlicher Anfahrschutz * LED-Beleuchtung * 50 mm Nadelholzboden * In den Ecken vor der Stirnwand und dem Abschlussträger jeweils 1 x 6,3 t Zurring sowie seitlich jeweils 2 6,3 t UVV-Zurringe im Außenrahmen eingelassen * Einteilige mechanische Gitterrost-Auffahrrampen mit Federmechanismus für Einmannbetrieb, ca. 2.350 x 870 mm (Innenabstand 20 mm, Rampen sind nicht verschiebbar) * Stirnwand, Seitenwände, Kotflügel und Zugrohr feuerverzinkt * Achsen, Federn, Luftkessel, Stützwinde vorn in Schwarz lackiert * Neufahrzeug mit voller Herstellergewährleistung * Irrtümer und Zwischenverkauf vorbehalten * Sofort ab Egestorf lieferbar. Nsdjwyhzvepfx Aibowf

Stanje: novo, največja dovoljena obremenitev: 8.500 kg, skupna masa: 11.990 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Oprema: ABS, * KA-TA-R 11.9 Masterline: * Front wall and floor hot-dip galvanized * Wabco ABS * Emergency release device for spring-actuated cylinders * Drum brakes, 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit * Height-adjustable (by 300 mm) hot-dip galvanized drawbar with 40 mm flange towing eye Nwjdpfjq Hg D Hjx Aibef * Jost mechanical landing gear at the front * Two mechanical, hot-dip galvanized folding support legs at the rear * 15-pin electrical connector * Multi-chamber tail lamps * Hot-dip galvanized bolted underrun protection * Tool box made of galvanized steel sheet, mounted on right side * Plastic quarter mudguards * Hot-dip galvanized chassis * Steel pallet 3-way tipper body * Continuous white-painted side walls at the top with internal tube reinforcement; foldable without center posts, with drop-side spring assist * Tailgate foldable and swinging, equipped with manual central locking * Hot-dip galvanized bolted rear stakes * Each corner equipped with 1 x 5 t lashing point and each side with 4 x 3 t lashing rings flush-mounted in the outer frame * 4 mm fine grain steel floor plate * Mesh hooks * Rear mounting rail for loading ramps * Removable steel side extensions, 500 mm high, 3 sides, swinging * Body reinforced and certified for load securing according to EN 12642 XL * 1 pair of aluminum drive-on ramps approx. 3,570 x 400 mm (load capacity 8 t per pair), suitable for rubber-tired and tracked vehicles * Rear lockable storage compartment recessed into the chassis below the loading area * Axles, springs, air tanks and landing gear painted in black * Tires 285/70 R 19.5 * Side panel color in RAL 9010 pure white * New vehicle with manufacturer’s warranty * Subject to error and prior sale * Immediately available ex-stock Egestorf, A7

Stanje: novo, največja dovoljena obremenitev: 9.070 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.010 mm, višina nakladalnega prostora: 325 mm, Leto izdelave: 2024, * ETS-TA-B 11,9: Nwsdpfxjwyhzpo Aibsf * Wabco EBS (elektronisches Bremssystem) * RDÜ (Reifendrucküberwachung) * Trommelbremsen, 2 x 5,5 t Gigant Achsen * Parabelfedern mit Ausgleichsaggregat * ca. 300 mm höhenverstellbares Zugrohr * BPW Stützwinde * mechanische Fallstützen hinten * Kunststoff-Werkzeugkasten vorne rechts an der Stirnwand * seitlicher Anfahrschutz * LED-Beleuchtung * 50 mm Nadelholzboden * in den Ecken vor der Stirnwand und am Abschlussträger jeweils 1 x 6,3 t Zurröse sowie seitlich je 2 x 6,3 t UVV-Zurringe im Außenrahmen eingelassen * einteilige mechanische Gitterrost-Auffahrrampen mit Federmechanismus für Einmannbetrieb ca. 2.350 x 870 mm (Innenabstand 20 mm, Rampen nicht verschiebbar) * Stirnwand, Seitenwände, Kotflügel und Zugrohr feuerverzinkt * Achsen, Federn, Luftkessel, Stützwinde vorne in einem Schwarzton lackiert * Neufahrzeug mit voller Herstellergewährleistung * Irrtümer und Zwischenverkauf vorbehalten * Sofort lieferbar ab Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 25.230 kg, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2012, Oprema: ABS, Müller Mitteltal 2-axle concrete semi-trailer, model SF32 BM/BT, superstructure type: HTM 1004 Liebherr, 10 m³, year of manufacture 2012; BPW axles, drum brakes, air suspension, lift axle, underrun protection, EBS, ABS. Nwsdpfxjrdt H Es Aibsf Single ownership Inspection book available Permissible total weight: 32,000 kg Unladen weight: 6,770 kg

Stanje: rabljeno, lastna masa: 4.190 kg, največja dovoljena obremenitev: 13.810 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 11/2016, vzmetenje: zrak, velikost pnevmatike: 385/55R22,5 160J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385/55R22,5 160J, velikost zadnje pnevmatike: 385/55R22,5 160J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Sidrne zanke, aluminijaste stranske stranice 800 mm, doplačilo za rampe 800 €, -- Pridržujemo si pravico do tiskarskih napak, sprememb in razlik v podatkih, vzorčne slike --, Več podatkov na: !, Več podrobnosti: ! Nedpfoy Hc T Hjx Aibowf

Stanje: rabljeno, lastna masa: 4.550 kg, največja dovoljena obremenitev: 13.450 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2016, dolžina tovornega prostora: 6.540 mm, širina tovornega prostora: 2.480 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: bež, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, 10 pairs of lashing rings, loading height approx. 900 mm, customer vehicle, -- subject to misprints, errors and changes -- sample images --, More data at: !, More Details: ! Nwjdpfx Asy Etlqsibof

Stanje: rabljeno, največja dovoljena obremenitev: 13.830 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2020, naslednji pregled (TÜV): 11/2026, Oprema: ABS, Nemško vozilo iz prve roke Nedpjy Haz Uofx Aibjwf brez nesreč Stranske stranice iz aluminija SAF osi Bobnaste zavore Dobro vzdrževano stanje najem, nakup, lizing najem s polno storitvijo od 590 evrov neto mesečno možen (cene najema so odvisne od trajanja najema) vse informacije pod Primer lizinga: 479 evrov neto mesečno pri dobi 36 mesecev, s predplačilom 5.000 evrov neto in končno obrokom 2.000 evrov neto. Vse cene so neto, plus DDV in ob pozitivni bonitetni oceni.