Fliegl 3-Achs Plateau Sattel Sds 380 Mega nakup rabljenega (41.080)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 6.640 kg, skupna masa: 40.000 kg, prva registracija: 02/2023, dolžina tovornega prostora: 13.510 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 445/45 R 19,5, barva: siv, Leto izdelave: 2023, 3-axle Mega Flatbed Semi-Trailer HeavyTrailer Gross weight: approx. 40,000 kg Fifth-wheel load: approx. 16,000 kg Axle load: approx. 24,000 kg Unladen weight: 6,640 kg Payload: 33,360 kg Length: 13,510 mm Vehicle width: 2,540 mm Coupling height: approx. 980 mm / 1,100 mm Loading height (unladen): 1,080 mm / 1,200 mm Chassis - Chassis frame construction made of welded longitudinal beams and continuous cross members - Wide underrun neck approx. 700 mm - 6 pairs of lashing rings (2,000 kg lashing capacity), welded into outer frame - 6 pairs of stake pockets (80 x 50 mm) in outer frame - 6 pairs of stake pockets (80 x 50 mm) inside on the longitudinal beam - 2 pairs of ferry lashings, painted yellow - 6 pairs of lashing rings (5,000 kg lashing capacity), welded into outer frame - Front wall approx. 2,000 mm high, with sheet metal cladding, bolted design - Large, edged premium rear lamp panel - Rear underrun protection, welded version (rectangular tube) - Side underrun protection, both sides Lhsdov Darpspfx Adgei Support Legs - 24 t telescopic landing gear, single-sided operation, half-moon with base plate Axles/Suspension - 3 axles à 8 t (technically 9 t), disc brakes - Second ride height: Button for 2nd ride height at bracket for raising and lowering (+ approx. 120 mm) - Air suspension, total stroke approx. 300 mm - Lifting and lowering device with 1 rotary slide valve - Holder for lifting/lowering device, bolted version - 6 tyres 445/45 R 19.5 - Wheel mounting via center centering Brakes - Dual-circuit compressed air brake system according to EC Directive 71/320 - With double eyelet valve for brake and spring brake - Test nipple for brake cylinder pressure at front right brake cylinder - Each coupling button red and yellow - Lifting/lowering device mounted at rear left in direction of travel - 2 x approx. 80 l air tanks in steel, painted black (1x brake, 1x lifting/lowering) Lighting System - Lighting system 24 Volt with large multifunction lights - Side marker lights (LED) with reflector - Front position lights, lower, white, one each on left and right - 15-pin plug and socket at front - EBS socket - License plate lighting Floor - 28 mm hardwood floor with galvanized omega steel profiles - Hardwood floor screwed onto the cross members - Omega profiles bolted to head frame Painting - KTL with zinc phosphating plus powder coating - Chassis + front wall: MB 7350 novagrau Accessories - Contour marking for flatbed vehicles - Front wall up to 2,000 mm high, with sheet metal cladding, plug-in type - Bracket for rotating beacon at rear - SmartBoard - ECE marking plate at rear - 4x warning signs, extendable - Access ladder rear right, foldable and extendable at rear - 2x wheel chocks with holder - 2 rubber bumpers at rear corners - Mud flaps at rear - Plastic fenders with anti-spray mud flaps - 4 pairs of container locks with retractable twistlocks, recessed into the floor, including additional cross members - Suitable for accommodating 1x40' and 2x20' containers - Open mesh box longitudinally in direction of travel (600 x 450 x 2,670 mm), galvanized, bolted

Stanje: novo, lastna masa: 10.600 kg, največja dovoljena obremenitev: 35.400 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 940 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Loading area: - Loading deck in extendable design - Loading deck with hardwood planks, rear bevel approx. 500 mm x 8° - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - Cut-outs in the loading deck's external frame for attaching tension belts Braking system: - Braking system in accordance with EU regulations, with EBS-E (2S2M) Painting: - First-class, durable corrosion protection for the standard shot-blasted welded frame guaranteed by a two-component (2K) zinc-rich primer - High-quality two-component (2K) top coat in solid Novagrey - Rear section metallised and painted in RAL 9010 (pure white) - Metallic paint not available Landing gear: - JOST mechanical landing gear with 2-speed gearbox, 24t lifting capacity (test load 50t) Steel construction: - Steel structure made from high-strength fine grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, LED lighting 24 Volt - Sockets: 2x 7-pin & 15-pin Axles and tyres: - BPW axles, air suspended, with disc brakes (377 mm), with lifting/lowering function - Hydro-mechanically forced steering - Axle tools - Twin tyres 235/75 R 17.5 Accessories included: - Yellow-red air couplings at the galvanised front connection bar - 4 wheel chocks with holder - 2" king pin - Galvanised steel headboard approx. 1600 mm high - White reflective tape on the sides, sliding section and rear in red in accordance with EU regulations - Loading deck with heavy-duty hardwood floor - Rear and front steering by cable - Remote control via push buttons, with single-track monitoring of the axles Lhjdpfx Adsl Ux Rwegji - With wireless remote control for rear steering - 9 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the loading deck - Galvanised folding supports under the loading deck bevel - Sliding mounting rail for aluminium loading ramps at the rear of the vehicle - European reflective panels (red-yellow) at the trailer rear - One mud flap at the trailer rear - Mount for a beacon at the trailer rear - Mounts for warning boards including socket on gooseneck and rear panel, each left and right - Stainless steel toolbox INOX 1,500 x 390 x 810 under the loading deck, right side in driving direction - Central lubrication system BEKAMAX (Pico) with NLHI-2 multipurpose grease and removable protection around pump - 6 pairs of WADER container locks on the loading deck for 1x 20ft, 2x 20ft or 1x 40ft containers, additional locking for one 45ft container in extendable section - 4 pairs of crosswise stake pocket strips mounted in the loading area for 100 x 50 mm plug-in stakes - Lift axle on the first axle, controlled by TEBS, dependent on current axle load and load condition - 80 km/h speed stickers at the rear and on both sides - Four extendable warning boards ca. 400 mm (approx. 423 x 423 mm) with LED position light - Beacon mount on the warning boards - Load gauge for axle load determination, including load diagram - HRM metallisation (High Resistance Metallisation) on the external frame - Complete steel construction shot-blasted, then all defined visible areas metallised with ZINACOR 850 (85% zinc, 15% aluminium) by thermal spraying

Stanje: novo, lastna masa: 9.500 kg, največja dovoljena obremenitev: 35.500 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R 19.5, barva: siv, obratovalna teža: 9.500 kg, Oprema: ABS, Loading platform in extendable design: Loading platform with hardwood planks, rear bevel approx. 1,000 mm x 8° 1 pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm 2 pairs of lashing rings (LC 5,000 daN) 1 pair of lashing rings (LC 10,000 daN) 6 pairs of fold-out lashing rings on the outside (LC 5,000 daN) 2 pairs of fold-out lashing rings on the outside (LC 10,000 daN) Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) Brake system: Brake system as per EU regulations with EBS-E (2S2M) Paintwork: Premium, long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer High-quality single-colour 2-component (2K) top coat in Nova grey Rear section metallized and painted in RAL 9010 (Pure White) No metallic paint possible Landing gear: JOST mechanical landing gear with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: Steel construction from high-tensile fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system: Electrical system according to EU regulations, 24 volt lighting Sockets: 24N, 24S & 15-pin Axles and tyres: BPW axles, air suspension, with disc brakes (377 mm), with lift/lower function Trailing steering axles with electro-magnetic reversing lock, actuated via reverse gear or manually Axle tool Tyres: 435/50 R 19.5 Accessories included: At the galvanized front connection strip: yellow-red air couplings 4 wheel chocks with brackets 2" kingpin Galvanized steel front wall approx. 1,600 mm high, EN12642-XL White reflective tape to EU standards on the sides, extension section and red at the rear Loading platform with heavy-duty hardwood floor 9 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform 1 spare wheel holder under the platform on the right (direction of travel) Galvanized folding supports under the rear slope of the loading area Sliding mounting rails for ALU loading ramps at the rear of the vehicle European reflective plates (red-yellow) at the rear of the semi-trailer One mudflap at the rear of the semi-trailer Bracket for a rotating beacon at the rear of the semi-trailer At the gooseneck and on the rear panel left and right, each with a bracket for warning panels including socket Lhsdpok Eammefx Adgoi One HDPE toolbox 620x360x610 under the platform on the left (direction of travel) 4 pairs of WADER container locks in the platform for 1x 20ft container or 1x 40ft container; additional locking position in the extension for a 45ft container 3 pairs of transverse stake pocket rails on the platform for 100 x 50 mm plug-in stanchions Lift axle on the front axle with control via TEBS E, depending on current axle load and loading condition Speed stickers 80 km/h on the rear and both sides Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light. Mounting for rotating beacon on warning boards Load gauge including axle load diagram HRM metallization (High Resistance Metallisation) of the outer frame Complete steel structure shot blasted, then specified visible surfaces metallized

Stanje: novo, lastna masa: 8.300 kg, največja dovoljena obremenitev: 36.700 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.080 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22.5, barva: siv, Oprema: ABS, dvižna zadnja plošča, Loading platform: Loading platform in extendable design with pneumatically operated locking mechanism Cutouts in the outer frame of the loading platform for attaching lashing straps Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity Axles and tires: BPW axles, air-suspended, with disc brakes (430 mm), with lift/lower function Trailing steering axle with electromagnetic reverse lock, activated via reverse gear or manually Axle tools Tires 385/65 R 22.5 Braking system: WABCO braking system in accordance with EU regulations with EBS-E Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer A high-quality single-color 2-component topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 No metallic paint available Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N / S355MC S690QL / S700MC Electrical system: Electrical system in accordance with EU regulations Lighting: 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front connection bar with 24N, 24S and 15-pin sockets Connection according to ISO Accessories included: Front galvanized connection bar with yellow-red air couplings One galvanized steel front wall approx. 1,600 mm high, EN12642-XL 4 wheel chocks with holders White reflector tape according to EU regulations on the sides, on the extension, and in red at the rear European reflective plates at the rear of the trailer Loading platform with approx. 30 mm thick hardwood floor enclosed in omega profiles 10 pairs of stake pockets for insertable stakes 100 x 50 mm in the outer frame of the loading platform 1 spare wheel holder under the loading platform, right-hand side in the direction of travel Manual and description One holder for a rotating beacon at the rear of the trailer On the gooseneck and each side of the rear plate (left and right), a bracket for warning panels incl. socket Lhodeikyh Hspfx Adgsi Anti-slip sand layer painted onto the central beam 6 pairs of WADER container pockets in the loading platform, for 1x 20ft container, 2x 20ft containers, or 1x 40ft container; the extension includes an additional locking point for one 45ft container 4 pairs of transverse stake pocket rails mounted in the loading platform for plug-in stakes 100 x 50 mm One galvanized holder transversely under the loading platform, 2,390 x 720 x 400 mm Access ladder mounted right-hand side in direction of travel Front axle lift axle with control via TEBS E depending on current axle load and load status Load manometer for determining axle loads, including load chart HRM metallization of the outer frame: complete steel structure shot-blasted, then the defined visible surfaces metallized hot-finished with ZINACOR 850

Stanje: novo, lastna masa: 10.000 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 51.600 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Loading Platform: - Gooseneck, length approx. 4,100 mm with central beam - Extendable loading platform, length approx. 9,500 mm with rear taper approx. 350 mm x 10° and integrated hook-on bar for attaching loose ALU approach ramps - Pneumatic locking system with conical locking bolts and reinforced locking positions - Supply lines are protected inside the extendable beams and automatically adjust to the respective platform length Axles, Suspension, and Tyres: - BPW axles and suspension, all axles hydro-mechanically forced steered - Mounted on turntable - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Tyres 235/75 R17.5, twin-mounted Lhodpsiuy Nljfx Adgji Paintwork: - 6-coat surface treatment - Complete steel structure shot-blasted after welding - One coat of zinc-based primer, one coat of adhesion primer - Final paintwork with 2 layers of 2-component (acrylic) paint, single colour in MB 7350 Novagrau, followed by cavity sealing with special wax Steel Structure: - Steel structure made from high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) - Welders certified according to DIN-EN 287-1 - Welding process MAG according to EN ISO 4063, shielding gas M21 according to EN ISO 14175 Accessories: - Steel front wall, approx. 1,600 mm high - Round NATO socket at the front connection strip - 3 kW electro-hydraulic unit for controlling hydraulic functions - 4 pairs of recessed lashing rings in the outer frame of the gooseneck - 4 pairs of stake pockets integrated into the outer frame of the gooseneck for stakes approx. 100x50 mm - 1 transverse stake pocket strip mounted in the floor of the gooseneck for stakes approx. 100x50 mm (1x rear on gooseneck) - 2'' kingpin - Mechanical landing legs with 2-speed gearbox and hand crank - JOST Module B – static test load = 50,000 kg - On the gooseneck and loading area, approx. 32 mm wooden flooring in ALU-omega profiles - One locking position on the extension, approx. every 500 mm - 10 pairs of recessed folding lashing rings in the outer frame of the loading area, folding outwards - 6 pairs of stake pockets integrated into the outer frame of the loading area for stakes approx. 100x50 mm - 2 transverse stake pocket strips mounted in the floor of the loading area for stakes approx. 100x50 mm - INOX toolbox approx. 1,250 x 500 x 550 mm - Tapered end crossmember of the vehicle, approx. 350 mm 10° - Integrated hook-on bar for loose ALU approach ramps at the rear crossmember of the vehicle - 1 pair of drop tube supports at the rear crossmember - Mudguards on all axles - Central lubrication system with 1 pump - Remote steering from front and rear operable via cable remote control with push button, including single-track monitoring of the axles - Under the gooseneck and at the rear crossmember, left and right, each with a 7-pin socket for warning panels - One 7-pin socket at the rear crossmember - Container locks "TWIST-LOCKS" in the loading area for transport of 2x 20ft and 1x 40ft containers - Radio remote control for rear steering in addition to cable remote control, with 2 indicator lights on the receiver for single-track monitoring - 2 axle load gauges + axle load diagram - 4 warning panels approx. 423 x 423 mm, extendable by approx. 400 mm - Standard HRM Metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible areas hot-coated in metallic finish using ZIN

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R 19.5, barva: siv, Oprema: ABS, Loading platform: - Loading platform in extendable design with pneumatically operated locking mechanism - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tension belts Axles and tires: - BPW axles, air-suspended, with disc brakes (377 mm), equipped with lifting/lowering function - Self-steering axles with electromagnetically controlled reverse lock, activated via reverse gear or manually - Axle tools - Tires: 435/50 R 19.5 Brake system: - Brake system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - Premium, durable corrosion protection for the standard shot-blasted welded frame by means of two-component (2K) zinc dust primer - High-quality two-component (2K) top coat in solid Novagrau - Rear end metallized and painted in RAL 9010 (pure white) - Metallic paint not available Ledpfxei Dwlwe Adgehi Landing gear: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: - Steel structure made of high-strength fine-grained steels. - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDICK (ASS3) lighting - ASPÖCK-UNIBOX on the front connection console with 24N, 24S & 15-pin sockets - Connections according to ISO standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories included: - Yellow-red air couplings at the galvanized front connection strip - 2 wheel chocks with holder - 2" kingpin - A galvanized steel front wall approx. 1,600 mm high - Yellow reflective tape as per EU regulations, on the sides, on the extension and at the rear of the trailer - European reflective signs (red-yellow) at the rear of the trailer - Loading area with approx. 38 mm thick hardwood floor - 10 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the platform - 1 spare wheel holder beneath the loading area on the right in the direction of travel - User manual and documentation on USB stick - One mudflap at the rear of the trailer - Bracket for a revolving beacon at the rear of the trailer - On the gooseneck and on the rear panel, left and right, each a bracket for warning boards including socket - One INOX toolbox transversely mounted beneath the platform (1,000x400x2,500mm) - 6 pairs of WADER container locks in the platform for 1x 20ft container, 2x 20ft containers or 1x 40ft container; an additional locking point is provided in the extension for a 45ft container - 3 sets of crosswise post pocket bars mounted in the platform for 100 x 50 mm plug-in posts - 60 km/h speed sticker on the rear - 2 reversing spotlights mounted on the rear panel - Four warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with a position light - Mounting bracket for rotating beacon on the warning sign - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, the defined visible surfaces then hot-finished with ZINACOR 850 metallisation (zinc 85% - aluminum 15%)

Stanje: rabljeno, lastna masa: 3.160 kg, največja dovoljena obremenitev: 34.840 kg, prva registracija: 08/2019, naslednji pregled (TÜV): 09/2024, skupna dolžina: 7.460 mm, skupna širina: 25.500 mm, skupna višina: 38.000 mm, vzmetenje: zrak, velikost pnevmatike: 385 / 65 R 22.5 / 5mm, velikost sprednje pnevmatike: 385 / 65 R 22.5 / 5mm, obratovalna teža: 38.000 kg,

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902024934, lastna masa: 3.900 kg, največja dovoljena obremenitev: 31.100 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 1.450 mm, prostornina tovornega prostora: 25 m³, skupna dolžina: 8.600 mm, skupna širina: 2.550 mm, skupna višina: 3.040 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 90 odstotek, barva: bela, Slike so arhivske! Demonstracijsko vozilo Šasija, prikolica, kiper Fino zrnata jeklena varjena konstrukcija, lahka izvedba, priklopna plošča z zamenljivim 2" kraljevskim čepom. Okvir brez nosilcev za opore menjalnika na strani. Ukrivljen sprednji zaključek, teleskopska opora na sredini, odklop prikolice med obremenitvijo ni možen, v odklopljenem stanju mora vozilo stati nagnjeno nazaj. Podložni klini z nosilcem, zaščita proti podiranju, zložljiva, polovični blatniki z novim nosilcem, s protibrizgalnimi elementi samo na zadnji osi. Palica za ponjavo z nosilcem, vlečna kljuka na zadnji strani. Osi + vzmetenje SAF diskovne zavorne osi, 370 mm premer diska (najlažja izvedba). "Osi/podvozje lasersko izmerjeno" za zmanjšanje obrabe pnevmatik in porabe goriva, "stabilizator za nagib" na 3. osi, nastavljiv, zračno vzmetenje, manometer za zračno vzmetenje, 1. os je samodejno dvižna os, dodatno upravljana električno iz vlečne enote, s pomočjo pri speljevanju, brez vgradnje v vlečno enoto (pomoč pri speljevanju je funkcionalna do preseženja obremenitve osi za 30 % in do hitrosti največ 25 km/h). Zavorna naprava Dvodovodna zračna zavorna naprava, barvno označene cevi za lažje vzdrževanje. Zavora s pomnilnikom vzmetne sile 2 varno zamenljiva glava priklopnih cevi na sprednji strani, brez povezovalne cevi, EBS, elektronski zavorni sistem z vtičnico EBS na sprednji strani, brez povezovalnega kabla. Pozor: prikolica sme biti vlečena samo s vlečnimi enotami, ki zagotavljajo učinkovitost ABS! z ventilom za dvigovanje in spuščanje, sistem stabilnosti vozila. Samodejno spuščanje pri nagibanju z zapornim ventilom. Kolesa in pnevmatike 385/65 R22.5", proizvajalec Fulda, polirana aluminijasta platišča, proizvajalec po izbiri proizvajalca. Elektrika 24 V, večprekatne luči LED z uporom, stranska rumena LED osvetlitev, osvetlitev registrskih tablic LED, (Opomba! Pri nekaterih vlečnih enotah lahko pride do napačnih diagnoz, čeprav funkcija deluje). 2 beli pozicijski svetili na sprednji strani LED, 2 beli/rdeči gabaritni svetili na zadnji strani LED, 1 x 15-polna vtičnica na sprednji strani, brez povezovalnega kabla, dodatni LED delovni žaromet na zadnji strani, vklopljen preko luči za vzvratno vožnjo. Hidravlika Cilinder nizkega tlaka, max. 170 bar, z navojno spojko HDK, fiksni del, NW 48 mm (brez povezave cevi). Lhsdpfx Adezl E Egegoi Delovanje hidravlično prek pomožnega pogona tovornjaka, hidravlična priključna točka s cevjo in navojno spojko HDK NW = 48 mm z obročasto matico. Korita Aluminijasto korito iz visokokakovostnega, abrazijsko odpornega materiala. Poševna čelna stena debeline 5 mm, z zunanjo montažo cilindra. Stranske stene iz profilov 30 mm z votlino, čisto varjene, z zgornjim profilom, ki preprečuje razsipanje materiala. Nosilec za lopato in metlo zunaj na čelni steni. Znotraj s stopniščem na čelni steni. Greenline - konična in aerodinamična oblika korita, "membrana" - zadnja stena, zadnja stena kot nihajna loputa, na zunanji strani, pritrjena z dvojno kljuko. Zadnja stena z gumijasto tesnilom. Opomba! Odporno na toploto do max. 170 °C, dno je po celotni dolžini debelo 6 mm, stopalna površina s stopniščem, zložljiva ponjava na eni strani za odlaganje na desni strani, z osrednjo zaklepno napravo na levi strani. Zložljiva ponjava iz lažje tkanine. Navodila za delovanje Pri transportu soli, apna itd. priporočamo uporabo cilindra za nagibanje z kromirano batno palico, da material ne bo napadel palice in povzročal rje. Navedena skupna masa je tehnično možna, vendar je glede n

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 5.000 kg, največja dovoljena obremenitev: 33.000 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 9.600 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", stanje pnevmatik: 100 odstotek, največja sedlasta obremenitev na trgu (20”) Prilagojena transportna rešitev Konfigurirajte svoje Fliegl vozilo glede na vaše potrebe. Prikazano vozilo je primer. Proizvodnja in oprema sta individualni po želji kupca. Podvozje za sedlasti kontejnerski priklopnik Varjena konstrukcija iz drobnozrnatega jekla, sedlasta plošča z izmenljivima dvema kraljevima zatičema in dvema pozicijama kraljevega zatiča Prijemi za kontejner: Zadnje podaljšanje uvlečeno: 1 x 20 čevljev ali 1 x 30 čevljev poravnano z zadkom Sredinski teleskop 1. stopnja, zadnje podaljšanje izvlečeno 1. stopnja: 2 x 20 čevljev ali 1 x 40 čevljev z ali brez gooseneck tunela Sredinski teleskop 2. stopnja, zadnje podaljšanje izvlečeno 2. stopnja: 1 x 45 čevljev z gooseneck tunelom in zadnjim prevzemom Sredinski teleskop 2. stopnja, sprednje podaljšanje izvlečeno 1. stopnja, zadnje podaljšanje izvlečeno 2. stopnja: 1 x 45 čevljev z dolgim gooseneck tunelom in poševnimi vogali Sredinski teleskop kot centriran cevast okvir s zatičnim zaklepanjem brez zadnje nastavitve višine in brez zložljivih sredinskih nosilcev, prevoz kontejnerjev brez tunela ni mogoč. 2 usmerjevalnika kontejnerjev, vključno s priključno ploščo za elektriko, zrak in zavorne priključke Vtični adapter za sprednjo zaporo, za spodnje blokiranje kontejnerjev brez tunela, z nosilcem za shranjevanje, kadar ni v uporabi Sprednje podaljšanje na valjih, ročno izvlečno (za 45' kontejnerje z dolgim tunelom) Zadnje podaljšanje na valjih, z ročno ročico 24 t, dvostopenjski podporni dvig, enostransko upravljanje Izvlečni spodnji zaščitni profil za 45' kontejner Zaščita pred naletom zadaj Osi in vzmetenje SAF osi z disk zavorami, premer diska 430 mm Osi/podvozje lasersko merjeno, zmanjšanje obrabe pnevmatik in porabe goriva Razmak osi odmik, mm (kombinirani promet) do 44 t skupne vlečne mase Zračno vzmetenje 1. os avtomatska dvižna os, vključno s prisilnim spuščanjem in pomočjo pri speljevanju, upravljanje z 3x zavoro Zavorni sistem 2-cevni zračni zavorni sistem, barvno označene cevi za lažje servisiranje Vzmetna parkirna zavora Tele Control – razbremenitev osi za lažjo teleskopijo 2 nepomešljivi priključni glavi spredaj, brez priključne cevi EBS, elektronski zavorni sistem z EBS vtičnico spredaj, brez povezovalnega kabla Pozor: Priklopnik sme vleči le vlečno vozilo, ki zagotavlja delovanje ABS! s sistemom za dviganje in spuščanje osi Sistem stabilnosti vozila Prepoznavanje obremenitve osi prek EBS canbus signala, za prikaz na zaslonu v kabini, tovornjak mora biti temu prilagojen, brez tovornjaške instalacije (ni overjene tehtnice) Kolesa in pnevmatike 385/55 R22.5, proizvajalec po izbiri proizvajalca Jekleni platišča, tovarniško srebrni Elektrika 24 V, 4 x 3-komorni zadnji luči + 1 okrogla vzvratna luč + 1 okrogla zadnja meglenka, ob strani rumena LED osvetlitev 2 bela pozicijska žarometa spredaj 2 bela/rdeča indikatorja sledenja zadaj 2 x 7-polni nepomešljivi vtičnici spredaj, brez povezovalnega kabla Navodila za uporabo Pri prevozu 45' kontejnerja s kratkim tunelom, s sprednjim podaljškom ali brez, se dovoljena sistemska dolžina od kraljevega zatiča do zadnjega roba vozila in skupna vlečna dolžina 16500 mm prekorači! Spodnji zaščitni profil je treba ročno izvleči! Potrebujete izjemo po § 70 StVZo! Ljdpfxszl Eh Us Adgjhi Registracija / tablice Nemčija Homologacija po EG 2007/46 24/7 servisna linija pripravljeno za enovrstični nosilec registrske tablice Oppozorilna tabla po ECE-70

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 4.816 kg, največja dovoljena obremenitev: 33.184 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 11.250 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", stanje pnevmatik: 100 odstotek, Tailored Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are individually customized to customer specifications. Chassis Semi-Trailer Container Fine-grain steel welded construction, fifth wheel plate with exchangeable kingpin and two kingpin positions Container mounts: included Rear extension retracted: 1 x 20 ft flush with the rear, note: low fifth wheel load Rear extension extended 1st stage: 1 x 30 ft, 2 x 20 ft, 1 x 40 ft with gooseneck tunnel Rear extension extended 2nd stage: 1 x 45 ft with gooseneck tunnel and rear overhang without height adjustment at the rear and without folding center supports, transportation of containers without a tunnel is not possible. Plug adapter for front locking, for locking containers without tunnel from underneath, with bracket for storage when not in use Rear extension mounted on rollers, with hand crank 24 t, two-speed landing gear, single-side operation 2 wheel chocks with holder Side underrun protection aluminum Rear underrun protection galvanized steel Extendable rear underrun protection for 45 ft containers Half-shell mudguards included with spray-suppression mud flaps according to EU standards Rear impact protection Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle and chassis laser-aligned to reduce tire wear and fuel consumption Axle spacing offset mm (intermodal transport) up to 44 t gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and traction assistance, operation by 3x braking (traction assist functional up to axle overload of 30% and max. speed of 25 km/h) Brake System Two-line pneumatic brake system Color-coded lines for easy servicing. Spring-actuated parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer vehicle may only be towed by tractor units that ensure the effectiveness of ABS! with lift & lower valve Vehicle stability system Axle load detection via EBS CAN bus signal, for display in the driver's cab (truck must be pre-configured, no truck installation, not a calibrated scale) Wheels and Tires 385/55 R22.5 brand according to manufacturer’s choice Steel rims, factory silver Electrics 24 volt, multi-chamber lights, tail and brake lights in LED, side yellow LED lighting (Note: Certain tractor units may incorrectly diagnose faults even if functions are operational) 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable sockets at front, without connecting cable Operating Instructions When transporting a 45 ft container with short tunnel, with or without front extension, the permissible system length from kingpin to rear of the vehicle and the total train length of 16,500 mm is exceeded! Rear underrun protection must be extended manually! An exemption according to § 70 StVZo is required! Registration/Country Plates Germany With Dekra inspection and certificate (according to §13 EC-FGV) 24/7 service hotline Prepared for one-line license plate holder Lhjdpozlkiwjfx Adgji 390 contour marking with reflective tape to ECE R 048, white on sides and red at rear Painting Frame hot-dip galvanized incl. passivation 15-year warranty against rust-through Support legs painted black

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 3.810 kg, največja dovoljena obremenitev: 34.190 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 12.660 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", stanje pnevmatik: 100 odstotek, Tailor-made Transport Solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and equipment are individually tailored to the customer’s specifications. Chassis Semi-Trailer for Containers Fine-grain steel welded construction, fifth wheel plate with interchangeable double king pin Container mounts: 1 x 40-foot with gooseneck tunnel Transport of filled tank containers is excluded. Without height adjustment at the rear and without folding center supports, transport of containers without tunnel is not possible. Removable container guide at the front 24 t, 2-speed landing gear, single-sided operation, straight base, without compensating bearing Wheel chocks with holders Aluminum side underrun protection Galvanized steel rear underrun protection Half-shell mudguards With anti-spray mudflaps according to EC regulations Rear impact guard Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axles/chassis laser-aligned – reduces tire wear and fuel consumption Axle spacing offset mm (suitable for combined transport) for up to 44 t gross train weight Air suspension 1st axle: automatic lift axle including forced lowering and starting aid; activated by braking three times (starting aid operational up to 30% axle overload and up to max. 25 km/h) Brake System 2-line compressed air brake system, color-coded lines for easy servicing. Spring-loaded parking brake 2 confusion-proof coupling heads at front, without connecting line EBS, electronic braking system with EBS socket at front, without connection cable Note: This trailer may only be towed by tractors that guarantee ABS functionality! Raise & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab (truck must be pre-equipped, not included) Wheels and Tires 385/55 R22.5, brand at manufacturer’s discretion Ledpfx Adezlkgcsgshi Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, LED rear and brake lights, yellow side LED lighting 2 white front position lamps 2 white/red lane marker lights at rear 1 x 15-pin socket at the front, without connection cable Side-mounted LED work lights on both sides (activated via reversing light) Additional LED work light(s) at the rear, activated via reversing light Operating Notes The specified gross weight is technically possible; depending on the cargo, the gross weight may not be achievable when adhering to the permitted axle, support, and fifth wheel loads. Special permit required if total train length exceeds 16,500 mm Attention: Transport of filled tank containers is excluded! Registration Country / Signs Germany With Dekra certification and report (per §13 EC-FGV) Prepared for single-row license plate holder Warning panel per ECE-70 Contour marking with reflective tapes per ECE R 048, white on the sides and red at the rear Paintwork Frame: DB 7350 Nova grey *10 years warranty against rust-through* or hot-dip galvanized *15 years warranty against rust-through* Support legs coated in black Tailor-made Transport Solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and equipment are individually tailored to the customer’s specifications.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 05/2023, dolžina tovornega prostora: 13.700 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 3.000 mm, skupna dolžina: 13.900 mm, skupna širina: 2.600 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 435/50R19,5, medosna razdalja: 8.970 mm, barva: drugo, Leto izdelave: 2023, Oprema: ABS, = Dodatne možnosti in dodatna oprema = - EBS = Opombe = Število osi: 3, nosilnost: 32.920 kg, lastna teža: 6.080 kg, bruto teža: 39.000 kg, vrsta šasije: popolna šasija, velikost prikolice: 2 palca, vrsta vzmetenja: zračno vzmetenje, ABS, EBS, leto izdelave nadstavka: 2023, pomična streha, vrsta osi: SAF = Dodatne informacije = Splošne informacije Kabina: dnevna Registrska tablica: OX-71-GS Pogonski sklop Vrsta goriva: dizel Lodpfjy U Ut Ujx Adgshi Prestavna enota Menjalnik: ročni Konfiguracija osi Dimenzija pnevmatik: 435/50R19,5 Zavore: kolutne zavore Vzmetenje: zračno vzmetenje Os 1: dvižna os; globina profila pnevmatik na levi strani: 9 mm; globina profila pnevmatik na desni strani: 9 mm Os 2: globina profila pnevmatik na levi strani: 10 mm; globina profila pnevmatik na desni strani: 10 mm Os 3: globina profila pnevmatik na levi strani: 8 mm; globina profila pnevmatik na desni strani: 7 mm Teže Lastna teža: 6.080 kg Nosilnost: 32.920 kg Bruto teža: 39.000 kg Funkcionalnost Pomična streha: da Okolje Razred emisij: Euro 0 Vzdrževanje Tehnični pregled (APK): veljaven do 11.2026 Stanje Splošno stanje: povprečno Tehnično stanje: povprečno Vizualno stanje: povprečno Poškodbe: nobene Finančne informacije Leasing: 315 € na mesec (privzeto, 60 mesecev); za dodatne informacije in pogoje se obrnite na nas = Podatki o podjetju = Kleyn Trucks je eden največjih neodvisnih trgovcev z rabljenimi vozili na svetu. Tukaj lahko izbirate med nenehno spreminjajočim se izborom 1200 rabljenih tovornjakov, vlečnih vozil in prikolic. Naša ponudba vključuje vse evropske znamke različnih let izdelave in cenovnih razredov. Zakaj kupiti pri Kleyn Trucks? Enostavno! • Velik, hitro spreminjajoč se izbor • Prepoznavna kakovost • Dobra cena • Poštena trgovina • Govorimo več jezikov • Razumemo naše stranke • Zagotavljamo pomoč pri uvozu in transportu • (Izvozni) dokumenti se hitro uredijo • Strokovne tehnične storitve • Zagotavljamo varnost "prepoznavne kakovosti" • In še več... Obiščite našo spletno stran za posebne ponudbe in celoten seznam zalog: Leasing pri Kleyn Trucks je možen v večini evropskih držav! Hitro izračunajte mesečni obrok za leasing in pošljite povpraševanje preko naše spletne strani. Za več informacij se obrnite na nas glede našega evropskega paketa garancije.

Stanje: rabljeno, lastna masa: 6.770 kg, največja dovoljena obremenitev: 28.230 kg, skupna masa: 35.000 kg, prva registracija: 01/2023, naslednji pregled (TÜV): 01/2026, dolžina tovornega prostora: 14.800 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, prostornina tovornega prostora: 110 m³, vzmetenje: zrak, velikost pnevmatike: 435/50R19.5, barva: modra, vrsta prenosa: drugo, velikost sprednje pnevmatike: 435/50R19.5, velikost zadnje pnevmatike: 435/50R19.5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, Kontaktna oseba za prodajo: Frank Rau / ruščina / angleščina / nemščina - Bachar Ibrahim / arabščina / angleščina / nemščina - Storitev za registracijo, tehnični pregled/glavni pregled/pregled varnosti, transport do pristanišča Osnovna barva: modra Ljdezmf N Iopfx Adgohi Dodatna oprema: ABS, EBS, vozilo pripravljeno za vožnjo, zračna vzmetitev, cena na zahtevo (mobilna povezava), diskovna zavora, video, vzmetitev: zračna, nosilnost (kg): 28230 Tip nadgradnje: MegaTrailer, dvižno streho, i-Lock, dolga tovornjak, 15,15 m, osi SAF, sistem Snow Free, HSN/TSN: 7951/000 Pridržana pravica do sprememb.

Stanje: rabljeno, lastna masa: 8.430 kg, konfiguracija osi: 3 osi, prva registracija: 11/2023, naslednji pregled (TÜV): 11/2026, velikost pnevmatike: 235/75 R17.5-235/75 R17.5, Leto izdelave: 2023, številka: 54781 Oprema: * Stranski zaščitni elementi, * Orodjarna omara: 4, * Izvedba zadnjih vrat: zadnja portalna vrata, * Zaklepne palice na zadnjih vratih: 4, * Pomikajoča se nadkrita, * Stranska pomikajoča se ponjava, Lhedpfx Aszmivxedgoi * Dvigni se strop, * Tlačna plošča: tla iz vezanice, * Vstavna letva (aluminij): 40, * Zračna priključna točka: ostalo: rumena/rdeča + Duomatic, * Električna priključna točka: 1 x 15-polna + 2 x 7-polna, * ABS, * EBS VIN: WFDFLT33901013129 Dimenzija pnevmatik: 235/75 R17.5 Dolžina (notranja): 14,8 m Širina: 2,55 m Širina (notranja): 2,46 m Višina: 4 m Višina (notranja): 3 m

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFL33802036539537, lastna masa: 6.320 kg, največja dovoljena obremenitev: 31.650 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 03/2025, naslednji pregled (TÜV): 03/2027, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 2.545 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R19.5, stanje pnevmatik: 100 odstotek, barva: srebrn, Leto izdelave: 2025, obratovalne ure: 10 h, Oprema: ABS, Podrobnosti na kratko: - takoj na voljo - na voljo dva enaka prikolici - iz prve roke - mega-prikolica (z nizko nosilno površino) - višina nastavljiva (približno 980 – 1100 mm) - dvigljiva na standardno višino - dvižna os, vključno s pomočjo pri speljevanju - zračna vzmetitev - pocinkano podvozje Lhodpfx Adoy Drk Aegji - 15 let garancije proti koroziji - aluminijaste nakladalne rampe (nosilnost približno 18 t) - zaklep za kontejnerje za 20- in 40-čevne kontejnerje - profil Load-Lock - obsežne pritrdilne točke (velika nosilnost) - želeti za pritrditev stranske zaščite, vključno s stranskimi zaščitami - LED-osvetlitev - orodjarni predali - gume 435/50 R19.5, skoraj nove - majhna prevožena razdalja, 5-3.200 km Oprema za pritrditev tovora, prikazana na fotografijah, ni del ponudbe! Tehnični pregled je bil opravljen julija 2026.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 5.100 kg, največja dovoljena obremenitev: 33.900 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 12.000 kg, dovoljena osna obremenitev (os 2): 12.000 kg, dovoljena osna obremenitev (os 3): 12.000 kg, dolžina tovornega prostora: 9.325 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 1.750 mm, prostornina tovornega prostora: 40 m³, skupna dolžina: 10.300 mm, skupna širina: 2.550 mm, skupna višina: 3.230 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, Prilagojena transportna rešitev Konfigurirajte svoje Fliegl vozilo glede na vaše potrebe. Prikazano vozilo je primer. Proizvodnja in oprema sta individualno prilagojeni glede na želje stranke. Lhodpfx Ajzhgp Sedgei *Podvozje polpriklopnika kiper Varjena konstrukcija iz finezrnatega jekla v osnovni lahki izvedbi, sedelna plošča z zamenljivim 2" kraljevskim zatičem "Curved" sprednji zaključek – patentirano 24 t, dvostopenjsko podporno dvigalo, enostransko upravljanje, s polkrožnim spodnjim delom in ravno priključno ploščo, s kompenzacijo potiska Zagozde za kolesa s nosilci Bočna zaščita iz aluminija Zložljiva podvozna zaščita Polovične blatnike z integriranim nosilcem (površina odbija kamenje) Protispray zaščitne zavese le na zadnji osi Nosilec za rezervno kolo za 1 E-kolo z garnituro za pritrditev Rezervno kolo, enake znamke kot osnovne pnevmatike, jeklena platišča Plastična orodjarnica s predalom in vmesno polico, š/l/v = 650/520/670 mm, zaklepna z obešanko Palica za ponjavo z nosilcem Vlečna kljuka zadaj *Osi in vzmetenje Osi z disk zavorami, premer diska 430 mm Osi v terenski izvedbi „Laser izmerjeno podvozje/os“ – zmanjšana obraba pnevmatik in poraba goriva Zračno vzmetenje 1. os avtomatska dvižna os, vključno s prisilnim spuščanjem in pomočjo pri speljevanju, delovanje „3x zaviranje“ (pomoč deluje do 30 % presežene obremenitve osi in največ 25 km/h) Pocinkan mehanizem dvižne osi, 10 let garancije proti predrtju *Zavorni sistem Dvokanalni tlačni sistem zrak-zavor Barvno označene cevi za lažje vzdrževanje Vzmetno zavarovana parkirna zavora 2 varno zamenljivi priključki spredaj EBS, elektronski zavorni sistem z EBS vtičnico spredaj Ventil za dvig/spust Sistem stabilnosti vožnje Samodejni nagibni spust z zapornim ventilom *Kolesa in pnevmatike 385/65 R22.5“ jeklena platišča, tovarniško srebrna barva *Elektrika 24V, večkomorni LED žarometi, stranske rumene LED luči, osvetlitev registrske tablice LED (opomba: pri nekaterih vozilih lahko pride do napačne diagnostike, čeprav deluje pravilno) 2 bele LED pozicijske luči spredaj 2 kombinirani rdeče/bele LED luči zadaj 2 x 7-polna in 1 x 15-polna varna vtičnica spredaj, brez priključnih kablov Dodatni LED delovni žarometi, integrirani zadaj *Hidravlika Nizkotlačni cilindri max. 170 bar, najmanjša stopnja trdo kromirana, z HDK navojno spojko, fiksni del, NW 48 mm Upravljanje hidravlike preko pomožnega pogona na tovornjaku Hidravlični priključek s cevjo in HDK navojnim priključkom NW 48 mm z vijakom *Kesoni Aluminijast keson iz visokokakovostnega, proti obrabi odpornega materiala Poševna prednja stena debeline 5 mm z zunanjim cilindričnim nosilcem Stranske stene iz 30 mm votlih profilov, lepo zavarjene, z zgornjim profilom, ki odbija razsute materiale; z notranjim pristopom na sprednji steni Zunanji nosilec za lopato in metlo na sprednji steni Greenline – konična in aerodinamična oblika kesona Vzmetna zadnja stena Zadnja stena kot nihajna vrata z dvojnim členkastim tečajem, zunanja s trenastim zapiranjem Zadnja stena z gumijastim tesnilom Sredinsko žitno loputo Dno po celotni dolžini 6 mm Stoječa platforma z dostopom, montažna plošča za zrak/elektriko in zavoro z veliko prostora za optimalno upravljanje Ponjava za zvijanje nameščena desno (FR-desno)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33802035389, lastna masa: 3.160 kg, največja dovoljena obremenitev: 34.840 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2024, naslednji pregled (TÜV): 03/2027, skupna dolžina: 7.690 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 90 odstotek, barva: siv, The images shown are archive photos! The vehicle may still be in use! Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin (chassis prepared for retrofitting, collection tray, 4 x hose support, tread plates, Fliegl standard) Container mounts: - 1 x 20-foot center position (or swap body containers 7.15 / 7.45 / 7.82), non-retractable at the front, container lock twist locks in the longer version. - 24-ton 2-speed landing gear, single-sided operation, with semi-circular base and flat mounting plate, equipped with stroke compensation - Wheel chocks with holders - Side underrun protection - Rear underrun protection with deep step for easier access + inner tread plate - Half-shell fenders - With anti-spray mud flaps according to EC Axles & Suspension: - BPW or SAF disc brake axles, according to manufacturer’s choice, with 430 mm disc diameter - "Axle/chassis laser measurement" to reduce tire wear and fuel consumption - Offset axle spacing 1410/1310 mm (intermodal transport) suitable for up to 44t gross train weight - Air suspension - 1st axle with automatic lift, including forced lowering and traction aid, operated by "brake pedal 3x" (traction aid function active up to 30% axle overload and max. speed of 25 km/h) Braking System: - 2-line compressed air braking system Lsdsy Tvuwjpfx Adgohi - Color-coded hose routing for easy servicing - Spring-loaded parking brake - 2 foolproof coupling heads at the front, without connector hose - 24V EBS (Electronic Braking System) with EBS socket at the front, without connecting cable - Note: This trailer may only be towed by tractor units that ensure the functionality of the ABS! - Includes raise & lower valve + auto-reset function - Vehicle stability program - Axle load detection via EBS CAN bus signal, display possible in the driver’s cab if the truck is equipped accordingly, no truck-side installation (no certified scale) Wheels & Tyres: - 385/65 R22.5, brand as per manufacturer’s choice - Steel rims, factory silver Electrics: - 24V, multi-chamber LED light clusters, yellow LED side marker lights, LED license plate illumination (Note: on certain tractor units, fault messages may occur even though all functions are working) - 2 white LED front position lights - 2 white/red LED lane marker lights at the rear - 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, without connecting cables - Additional LED work lamp at the rear, controlled by the reversing light Operational Notes: This vehicle may only be loaded with 20’ tank containers compliant with ISO 668 and especially ISO 1496-3! The tank containers must have end-load-transfer areas ("end cross member load transfer areas")! Country of Registration / Plates: - Germany - With Dekra inspection and certificate (according to §13 EC-FGV) - 24/7 service hotline - Prepared for single-line license plate holder - Warning panel according to ECE-70 - Contour marking with reflective tape in accordance with ECE R 048, white on the sides, yellow at the rear The images shown are archive photos! The vehicle may still be in use!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33802030369, lastna masa: 31.110 kg, največja dovoljena obremenitev: 34.889 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2022, naslednji pregled (TÜV): 01/2027, skupna dolžina: 7.390 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, barva: rdeča, The images are archive photos; the vehicle may still be in use! Fine-grain steel welded construction, kingpin plate with exchangeable 2" kingpin, container mounts: 1 x 20-foot container (centered) or swap body container 7.15 / 7.45 m, front not retractable, extended version twist locks for container securing. 24-ton, 2-speed landing gear, one-sided operation, with straight lower section, without compensating ram. Wheel chocks with holders, side underrun protection, aluminium rear underrun protection, with anti-spray mudflaps according to EU regulations, stainless steel (VA) drip tray with 1 1/4-inch drain pipe + 1 1/4-inch shut-off valve, including drip plate, with perforated step plates approx. 400 mm wide, left & right between drip tray and longitudinal frame. Ledpfx Adjy Tvphogehi Hose trays approx. 4500 mm long (incl. hose compartment) for pipe holders 2 x DN 200 external + 2 x DN 160 centered, rear hose compartment (VA steel) 300 mm deep, splash-proof, lid (VA steel) all around with rubber seal, with drain hole at lowest point, then lidless on hose pipes, stainless steel grounding lug rear in FR-right on frame with international grounding sticker on frame, rear right rear access steps on underrun protection, at main frame rear outer FR-right: step plate approx. 260 mm long and 300 mm wide. Axles & suspension SAF disc brake axles, "axle/chassis laser aligned" to reduce tire wear and fuel consumption, staggered axle spacing 1410/1310 mm (combined transport) up to 44 tons GCW. Air suspension, first axle automatic lifting axle, including forced lowering and start assist, operated via "3x brake activation" (start assist operable up to 30% axle overload and speeds up to max. 25 km/h). Braking system 2-line compressed air braking system, color-coded line routing for easy service. Spring-loaded parking brake. 2 non-interchangeable coupling heads at front (without connecting line), EBS electronic braking system with EBS socket at front (without connecting cable). Note: The trailer must only be towed by tractor units that ensure proper ABS functionality! With raising and lowering valve, vehicle dynamic stability control. Axle load detection via EBS CAN-bus signal, for display in the driver cab (truck must be pre-equipped, no truck installation). Wheels & Tyres 385/65 R22.5, manufacturer’s brand of choice, steel rims, factory silver. Electrics 24 volt, multi-chamber tail lights, side yellow LED lighting, 2 white position lamps at the front, 2 white/red lane marker lights at the rear, 1 x 15-pin socket at the front (without connecting cable). Operating Notes The total permissible weight stated is technically possible; however, depending on the load, the total weight may not be achievable while adhering to permissible axle, kingpin and saddle loads (poor handling may result from incorrect load distribution). This vehicle must only be loaded with 20’ tank containers compliant with ISO 668 and specifically ISO 1496-3! The tank containers must have "end-load-transfer areas". Approval/Country/Signs Warning sign according to ECE-70, ADR inspection as per 9.1.1.2 of ADR, EX/II, EX/III, approval certificate for vehicles transporting certain dangerous goods (ex. B3), with warning sign at the rear (not valid for substances according to UN 0331 and 0332 – explosives B-E), contour marking with reflective strips as per ECE R048, white at sides, yellow at rear.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902027997, lastna masa: 6.832 kg, največja dovoljena obremenitev: 28.168 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2021, dolžina tovornega prostora: 13.460 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.740 mm, skupna dolžina: 15.100 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", stanje pnevmatik: 100 odstotek, barva: črn, These images are archive photos; the vehicle may still be in use! Equipment details available on request. Lhsdpfx Adswk Dg Njgji

Stanje: rabljeno, številka stroja/vozila: WFDFLT23861001990, lastna masa: 45.900 kg, največja dovoljena obremenitev: 33.100 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, skupna dolžina: 9.800 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 265/70 r19,5, stanje pnevmatik: 100 odstotek, barva: rdeča, Further information Ex-display vehicle from 2006 – used internally and therefore shows signs of wear! Side underrun protection: Aluminium, from king pin to start of side underrun protection: 2,600 mm Rear underrun protection: Frame color, recessed and fitted flush with the end of the chassis as far inward as possible Lhedpji Ri Hysfx Adgsi Chocks: 2 pieces with holders Bumper buffers: 2 steel buffers Paintwork: Sandblasted base, 2-component acrylic paint Rims: Factory silver Approval: with DEKRA inspection

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902024321, lastna masa: 5.765 kg, največja dovoljena obremenitev: 29.235 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2018, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.470 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", stanje pnevmatik: 100 odstotek, barva: črn, The images are for reference only; the vehicle may still be in use. Lhsdpfjwk Dk Iox Adgei Equipment details available upon request!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 6.100 kg, največja dovoljena obremenitev: 28.900 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 1.060 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 r19.5, stanje pnevmatik: 100 odstotek, Dodatne informacije Fina zrnata jeklena varjena konstrukcija, + prednapetost z lažjo prednapetostjo na območju vratu, sedlarska plošča + zamenljiv 2. kraljevski zatič, zunanji okvir rahlo poševen, nova izvedba s profilom Load-Lock za pritrditev napenjalnih pasov, 24 t, 2-stopenjski podporni vitel, enostransko upravljanje, z ravnim spodnjim delom, brez izravnave potiska. Opomba: Prosta mera podpornih nog ali prosti polmer zamaha nazaj približno 1930 mm, izvlečna lestev na zadku, bočno držalo vrat, 2 zagozdi z držalom, bočna zaščita iz aluminija, podvozna zaščita iz pocinkanega jekla, četrtinski blatniki pred 1. osjo in za vsako osjo, z blatniki proti škropljenju v skladu z ES, zadnji odbijač na zadku. SAF osi s kolutnimi zavorami, osi/podvozje lasersko izmerjeno za zmanjšanje obrabe pnevmatik in porabe goriva, zračno vzmetenje. 2-cevni zavorni sistem na stisnjen zrak, barvno označene cevi za lažje vzdrževanje, parkirna zavora z vzmetjo, 2 varno zamenljivi sprednji spojni glavi, brez povezovalne cevi, EBS (elektronski zavorni sistem) s sprednjo EBS vtičnico, brez priključnega kabla. Pozor: Priklopno vozilo lahko vlečejo samo tista vlečna vozila, ki zagotavljajo učinkovitost ABS! Z dvižnim in spustnim ventilom, sistem stabilnosti vožnje vozila. 435/50R19.5, proizvajalec po izbiri, jeklena platišča, tovarniško srebrna. 24-voltni sistem, večkomorni žarometi, bočna rumena LED osvetlitev, 2 bela pozicijska žarometa spredaj, 2 bela/rdeča označevalnika pasu zadaj, 2 x 7-polni varno zamenljivi vtičnici spredaj, brez povezovalnega kabla. Tla: protizdrsne vezane plošče približno 30 mm, na vzdolžnih podkonstrukcijah za visoko točkovno obremenljivost, za osno obremenitev viličarja do največ 7100 kg. Prednja stena / sprednji stebrički: višina 2580 mm, spodnji vogalni stebrički iz jekla za tovorne volumne, sprostitveni mehanizem za bočno ponjavo na sprednji steni, crash blocker, spodaj znotraj na približno 140 mm višine z jeklenim odbijačem. Sredinski stebrički: 3 pari pomičnih stebričkov po vsej dolžini, s 4 žepi za vložke in spodaj z dolgim žepom, 3 pari položajev stebričkov. Vložki: 5 vrst lesenih letvic. Zadnja stena / zadnji vogalni stebrički: zadnji stebrički iz jekla do spodnjega roba strehe, obesitev ponjave z okroglimi cevmi in napenjalno ročko, dvokrilna zadnja portalska vrata z notranjimi zapahi. Ponjave: ponjava z vgrajenimi horizontalnimi in vertikalnimi pasovi, napenjalne zaponke iz nerjavečega jekla. Streha: drsna streha, zadnji del pokrova zložljiv navzgor, možno premikanje pokrova od zadaj naprej, L-strešni nosilec za avtomobilsko industrijo, notranja širina med strešnimi nosilci približno 2490 mm, barva ponjave: bela, 400 Roof non-elastic, minimalen upogib strešnega nosilca pri nakladanju/razkladanju, optimalen žleb za deževnico zadaj, zgoraj na končniku, nad vrati, EcoLift – dvižna streha cca 380 mm, podprta z plinskimi vzmetmi, trije višinski položaji spredaj: notranja višina spredaj cca 2900 mm / 2950 mm / 3000 mm, nastavljeno na cca 3000 mm. Lhedpfx Aji Ri E Hjdgji Nemčija, homologacija v skladu s EG 2007/46, 24/7 servisna linija, Fliegl certifikat proizvajalca o trdnosti nadgradnje po EN 12642 XL, pripravljen za enovrstični nosilec registrske tablice, opozorilna tabla po ECE -70, odsevni trakovi: beli, neprekinjeno na spodnjem delu stranske ponjave in zgoraj v kotih (če so vidne stranske stene, je trak spodaj na njih), odsevni trakovi: rdeči, na zadnjih vratih po obodu. Okvir DB 7350 Novasiva, 10 let garancije proti rjavenju, podporne noge črno

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 5 kg, največja dovoljena obremenitev: 29 kg, skupna masa: 35 kg, konfiguracija osi: 3 osi, skupna dolžina: 13.990 mm, skupna širina: 2.550 mm, velikost pnevmatike: 385 / 65 r 22,5, stanje pnevmatik: 100 odstotek, Rešitev za transport po meri Konfigurirajte svoje vozilo Fliegl glede na vaše zahteve. Prikazano vozilo je primer. Proizvodnja in oprema se izvedeta individualno po željah stranke. Dodatne informacije Podvozje polpriklopnik za špedicijo Jeklena varjena konstrukcija v ojačani izvedbi, le 2 vzdolžna nosilca kot dvotirna nosilca z jekleno/rebrasto pločevino med nosilcema, sedelna plošča z izmenljivim 2. kraljevim zatičem. Zaščitni pokrov za zadnje luči. 1 jeklen zabojnik, vgrajen med vzdolžnima nosilcema 8 parov pritrdilnih ušes na okvirju, vijačeno ali varjeno po izbiri proizvajalca 24 t, 2-stopenjska podporna noga, enostransko upravljanje, z ravnim spodnjim delom, brez kompenzacije potiska 2 zagozdi z nosilcem Stranska zaščita proti naletu iz aluminija Podvozna zaščita iz pocinkanega jekla Polovični blatniki z antispraj ščitniki v skladu z EU 1 nosilec za rezervno kolo za 1 E-kolo z kompletom za pritrditev kolesa 8 lesenih nosilcev po izbiri proizvajalca, privijačenih na okvir, vsak z 2 teleskopski leseni prečki, raztegljivi od 1800 do 2800 mm, nosilnost para 7 t Premi in vzmetenje SAF premne z disk zavorami, 430 mm Lhsdpfxoi Rivwo Adgji Zračno vzmetenje z dvigalom in spuščanjem, varovalna vrv na oseh 1. os avtomatsko dvižna, vključno s prisilnim spustom in pomočjo pri speljevanju, aktivacija s 3 × zaviranjem (pomoč pri speljevanju deluje do 30 % prekoračitve osne obremenitve in največ do 25 km/h) Pomak osnega razmika mm (kombinirani promet) do skupne teže vlečne kompozicije 44 t Kolesa in pnevmatike 385 / 65 R 22,5 po izbiri proizvajalca Jeklena platišča, tovarniško srebrna Zavorni sistem Dvovodni zračni zavorni sistem Parkirna zavora z vzmetnim akumulatorjem Prepoznavanje obremenitve osi preko EBS-Canbus signala za prikaz na zaslonu v kabini, tovornjak mora biti ustrezno pripravljen, brez namestitve na tovornjak (ni overjene tehtnice) 2 varnostni sprednji spojni glavi brez spojne cevi EBS – elektronski zavorni sistem z EBS vtičnico spredaj, brez priključnega kabla Pozor: Prikolico smejo vleči samo vlečna vozila, ki zagotavljajo delovanje ABS! Električna oprema 24 V, večkomorni žarometi, stranske rumene LED luči 2 beli pozicijski luči spredaj 2 belo/rdeči marker luči zadaj 2 × 7-polni in 1 × 15-polni varni vtičnici spredaj, brez priključnih kablov Sprednja stena/ vogalni nosilci spredaj Sprednja stena iz jekla/mreže, cca 2300 mm visoka, privijačena na okvir Homologacija/tablice Država homologacije: Nemčija Potrdilo skladnosti po EG 2007/46 pripravljeno za enovrstni nosilec registrske tablice Obrobljanje s reflektivnim trakom v skladu z ECE R 048, stranski beli, zadaj rdeči Lakiranje Okvir DB 7350 novosivo Podporne noge črno prevlečene Sprednja stena vroče cinkana Pozor: Arhivske fotografije! Rešitev za transport po meri Konfigurirajte svoje vozilo Fliegl glede na vaše zahteve. Prikazano vozilo je primer. Proizvodnja in oprema se izvedeta individualno po željah stranke.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 5.600 kg, največja dovoljena obremenitev: 32.400 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, višina nakladalnega prostora: 1.295 mm, skupna dolžina: 12.900 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", stanje pnevmatik: 100 odstotek, Prilagojena transportna rešitev Konfigurirajte svoje Fliegl vozilo glede na vaše zahteve. Prikazano vozilo je primer. Proizvodnja in oprema sta prilagojeni posameznim željam stranke. Podvozje polpriklopnika za kontejnerje Varjena konstrukcija iz drobnozrnatega jekla, sedelna plošča z zamenljivim dvema krogličnima čepoma in dvema položajema čepa Sprednje zapiranje na nosilcu za dvigalko prekucnika z obojestranskimi vodilnimi klini, zadnje zapiranje na prečni rotacijski osi z vzmetnim povratkom Brez pomožnega okvirja za samonosne kontejnerje Sistemi za pritrditev kontejnerja: Prečna zapirala za pritrditev po dolžini, možnost dvojnega zapiranja za 1 x 30 ft ali 1 x 40 ft kontejner. Nastavitev s sredinskim teleskopskim centralnim cevnim okvirjem z zapiranjem z zatičem. Optimalna osna obremenitev pri prevozu 30 ft in 40 ft kontejnerja. Lodpfei Riv Ejx Adgjhi 24 t, dvostopenjska podporna dvigalka, upravljanje z ene strani, z ravnim spodnjim delom, brez kompenzatorja potiska 2 zagozdi za kolesa z nosilcem Bočna zaščita iz aluminija Podvozna zaščita iz pocinkanega jekla Polovični blatniki s protisprejnimi zaščitnimi zavesicami po EU standardih Hidravlika 100 bar nizkotlačni cilinder, max. 150 bar, s HDK navojnimi spojkami, fiksni del, notranji premer 48 mm (brez cevi) Hidravlično upravljanje preko dodatnega pogona na tovornjaku Vključuje hidravlični priključek s cevjo in HDK navojno spojko NW = 48 mm z navojno matico Premi in vzmetenje SAF premi z disk zavorami, premer diska 430 mm Premi in podvozje lasersko izmerjeni, kar zmanjšuje obrabo pnevmatik in porabo goriva Razmak prem zamaknjen (kombiniran promet) do 44 t skupne teže vlaka Zračno vzmetenje Zavorni sistem Dvovodni zračni zav. sistem Barvno označene cevi za lažje vzdrževanje Parkirna zavora s povratno vzmetjo Tele Control Razbremenitev osi za lažje teleskopiranje 2 nezamenljivi spojki spredaj, brez povezovalnih cevi EBS elektronski zavorni sistem z EBS vtičnico spredaj, brez povezovalnega kabla Pozor: Priklopno vozilo sme vleči samo vlečno vozilo, ki zagotavlja delovanje ABS sistema! Z dvignjenim in spuščenim ventilom Sistemska stabilnost vozila Prepoznavanje osne obremenitve prek EBS-Canbus signala za prikaz na zaslonu v kabini (tovornjak mora biti ustrezno opremljen) Kolesa in pnevmatike 385/65 R22.5, proizvajalec po izbiri Jekleni platišči, tovarniško srebrni Elektrika 24 V, večkomorni žarometi, stranske rumene LED luči 2 beli pozicijski luči spredaj 2 bela/rdeča markerja zadaj 2 x 7-polni nezamenljivi vtičnici spredaj, brez povezovalnega kabla 2 dodatna LED delovna žarometa zadaj, upravljana preko vzvratne luči Prilagojena transportna rešitev Konfigurirajte svoje Fliegl vozilo glede na vaše potrebe. Prikazano vozilo je zgolj primer. Izdelava in oprema potekata individualno, po željah stranke.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 3.100 kg, največja dovoljena obremenitev: 34.900 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 7.690 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, Customised Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer specifications. Chassis Semi-Trailer for Containers Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Container mounts: 1 x 20-foot container central (or swap body container 7.15 / 7.45 m), fixed at the front, container lock twistlocks in extended version 24 t 2-speed landing gear, single-sided operation with anti-spray mudflaps according to EC standards Stainless steel drip tray with 1 1/4" drain pipe + 1 1/4" shut-off valve, incl. drip plate, perforated tread plates approx. 400 mm wide, left & right between drip tray and main longitudinal beam Lhodsi Rixkepfx Adgsi 4 hose racks approx. 4,500 mm long (hose box) for hose tubes: 2 x DN 200 outside + 2 x DN 160 centred, rear hose box (stainless steel) 300 mm deep, splash water protected, lid (stainless steel) all-round rubber seal, drainage hole at lowest point, then without lid on hose tubes 1 stainless steel grounding lug at the rear right side of the frame, with international grounding sticker on the frame Access steps right rear on underrun guard, rear right outside on main beam with tread plate approx. 260 mm long and 300 mm wide Axles & Suspension SAF disc brake axles Axle/chassis laser alignment: reduces tyre wear and fuel consumption Offset axle spacing (combined transport) up to 44 t gross train weight Air suspension 1st axle automatic lift axle, incl. forced lowering and start assist, operated by 3x brake activation Braking System 2-line air brake system Colour-coded pneumatic lines for easy maintenance Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: Trailer must only be towed by tractors that ensure ABS functionality! With lift & lower valve Vehicle stability control system Axle load recognition via EBS CAN-bus signal, for display in cab (truck must be pre-equipped), not calibrated as a weigh scale Wheels and Tyres 385/65 R22.5, manufacturer as per supplier’s choice Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at front 2 white/red marker lights at rear 1 x 15-pin socket at front, without connection cable Operating Instructions The specified gross weight is technically possible; depending on the load, the gross weight within the permissible axle/support/kingpin loads may not be achievable (poor driving and trailing performance may result from incorrect load distribution) This vehicle may only be loaded with 20’ tank containers complying with ISO 668 and especially ISO 1496-3! Tank containers must have 'end-load-transfer areas' (end transverse beam load transfer areas)! Country of Registration/Plates Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Warning plate to ECE 70 Inspection according to ADR sec. 9.1.1.2, EX/II, EX/III / Registration certificate for vehicles for the transport of certain dangerous goods (ex.B3), with warning panel at the rear; not valid for substances UN 0331 and 0332 (explosives B-E) Conspicuity marking with reflective tape