Fliegl 3-Achs Plateau Sattel Sds 380 Mega nakup rabljenega (41.225)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33801012811, lastna masa: 6.350 kg, največja dovoljena obremenitev: 28.650 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R19,5", stanje pnevmatik: 100 odstotek, barva: srebrn, multiple units available Chassis fifth wheel forwarding: Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin, reinforced frame for vehicle loading, outer frame with "Load-Lock profile" every approx. 400 mm for lashing strap hooks, 10 pairs of lashing mushrooms recessed on top/outside of the outer frame, each rated at 10 t, foldable rear support, 2 wheel chocks with holders, aluminum side underrun protection, galvanized steel rear underrun protection, quarter mudguards in front of 1st axle and behind each axle, with anti-spray flaps behind each axle, 1 spare wheel holder for 1 single wheel, incl. wheel mounting kit, 2 lockable plastic toolboxes, w=600 / h=425 / d=460 mm, container locks: 4 pairs of locks recessed in the floor for 2 x 20 ft or 1 x 40 ft container, front-most position is a recessed fold-down lock, 10 pairs of stanchion pockets recessed in the outer frame, 70 x 40 mm internal dimension, 10 stanchion pockets recessed centrally in the floor, 70 x 40 mm internal dimension, 2 cross tie-down/stanchion rails recessed into the floor spanning the full width to the outer frame (approx. max usable interior width between external stake pockets 2170 mm), about 100 mm high. Includes 20 mm round steel rails at top and bottom, spacing about 60 mm (between rails); bottom end with angled sheet as closure, open downwards halfway. For lashing and inserting stakes up to 80 x 80 mm. Arrangement: Positions 2 and 4 according to Fliegl data sheet, 20 removable stakes, hot-dip galvanized, storage space for aluminium drive-on ramps, ramps can be inserted from the rear, 3 pairs of fold-down lashing points (10 t) in outer frame (1x in front of front wall and 2x at the rear) Axles & Suspension: SAF disc brake axles, air suspension, 1st axle with automatic lift axle, includes forced lowering and start assist, actuated by "brake 3x", axle lift below recommended driving height, therefore no warranty for tire damage Kdedpfxsza Agro Aikjp Brake system: 2-line compressed air brake system, color-coded routing for easy service, spring-type parking brake, 2 fail-safe coupling heads at front, no connecting line, EBS, electronic braking system with EBS socket at front, no connection cable, with raise & lower valve, 2 driving heights adjustable via manual knob: 1x for coupling height 980 mm, 1x for coupling height 1100 mm, ride height in combination with lift axle; when lift axle is raised, load/overall height increases by 50 mm, vehicle stability control system Wheels and tires: 435/50 R19.5, brand at manufacturer's discretion, steel rims Electrics: 24V, multi-chamber lights, yellow LED side lighting, 2 white LED position lights at the front, 2 white/red lane marker lights at the rear, 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, LED work lights: 1x each left/right in front frame, 2 additional LED work lights at rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning panels: LED-illuminated and extendable to 4,000 mm, additional 7-pin socket at rear underrun protection Floor: phenolic plywood, approx. 30 mm thick, on longitudinal beams for high point loading, suitable for forklift axle load up to max. 7,100 kg Front wall / corner stanchions: 25 mm aluminum hollow section, 1,350 mm high, steel corner stanchions in volume version, front wall inside also lined with 1,250 mm phenolic plywood, "Crash-Blocker", lower 140 mm inside with steel impact protection, storage compartment for insertable stanchions insi

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33801013475, lastna masa: 7.180 kg, največja dovoljena obremenitev: 28.820 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, barva: srebrn, Available in multiple units. Fine-grain steel welded construction, saddle plate with replaceable 2" kingpin, additional splash guard made from sheet metal riveted to the underside floor, in the gooseneck area above the rear axle of the tractor unit as well as above the wheels on the vehicle. Reinforced frame version for vehicle loads up to the outer frame. Outer frame equipped with "Load-Lock profile" approx. every 400 mm for lashing strap attachment, 10 pairs of lashing mushrooms recessed into the outer frame, each rated at 10 tons, 24 ton 2-speed landing gear, single-sided operation, with semi-rounded lower section and straight connection plate, featuring load compensation, foldable rear support, wheel chocks with holder, aluminum side underrun protection, steel underrun protection, quarter-fender mudguards in front of and behind each axle, with additional sheet splash guards over the wheels, fitted with anti-spray mud flaps according to EC standards, 1 plastic toolbox (600 x 425 x 460 mm), lockable. Container locks: 4 pairs of locking recesses embedded in the floor for 2 x 20-foot or 1 x 40-foot container, 4 pairs of container locking adapters (additional cross supports at the front and rear of the container required; the container must be evenly supported across the width; cross supports not included). Ramp attachment bar at rear extension across full width, mechanical rear extension with hand crank extendable by approx. 1,500 mm, lockable every 500 mm, includes extendable underrun protection with lighting. Lane area fitted with Lohr perforated sheet, central area with steel checker plate, storage space for drive-on ramps integrated in rear extension—usable only when rear extension is extended by approximately 1000 mm. For ramp transport with retracted rear extension, ramp storage is located on the right in front of the axles. One pair of ramps, 3,000 mm long, 300 mm wide, load capacity per pair 6,000 kg. Electric cable winch, 24 volts, pulling force approx. 8,165 kg, centrally mounted at the very front, operated by remote control, cable length 35 m x approx. 10 mm, with roller cable window and removable guide rollers. Axles & Suspension: SAF or BPW drum-braked axles as selected by the manufacturer, air suspension, first axle with automatic lift axle, additionally electrically operable from the truck, including forced lowering and drive assist. Brake system: 2-line compressed air brake system, color-coded line routing for easy service, spring-loaded parking brake, 2 fail-safe coupling heads at the front, EBS (electronic braking system) with EBS socket at the front (no connection cable provided), with raise & lower valve and fast venting, hold function in lowered position + auto-reset function, vehicle stability system, axle load detection via EBS CAN bus signal. Wheels & Tires: 235 / 75 R 17.5" — brand per manufacturer's choice, twin-mounted steel rims. Kdedeza Aiyspfx Aikep Electrics: 24 volts, LED multi-chamber lights, side yellow LED lighting, license plate lighting in LED, 2 white position lights at the front in LED, 2 white/red lane marker lights at the rear in LED, 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, 2 additional LED work lights at the rear, 1 rotating beacon with holder, operated via parking light, 2 pairs of double LED-illuminated warning panels extendable to 3,000 mm, 1 additional 7-pin socket (ISO 1724) in the rear underrun protection, 2 side LED work lights (1 each on front left and right). Floor: Lohr perforated stee

Stanje: novo, konfiguracija osi: 3 osi, barva: sivo-črna, vrsta prenosa: mehanski, Colour: Natural, lift axle, electronic braking system (EBS), 1x 15-pin connection plug. Equipment: Slightly beveled new-design outer frame with “Load-Lock Profile” for lashing straps, 13 additional pairs of lashing rings in the outer frame, each rated 5 t for a total of 24 t. Two-speed landing gear, single-sided operation, with semi-circular lower section and straight forklift underrun protection made of steel on the outer frame (sides and rear). One spare wheel carrier for one single wheel, with wheel fastening kit. 1 plastic toolbox (650 mm x 520 mm x 670 mm). 7 pairs of drop-in stake pockets (83 x 83 mm) integrated into the outer frame. SAF disc brake axles with 430 mm air suspension. First axle is an automatic lift axle, including forced lowering and starting aid, activated with third brake circuit. Wheels and tires: 6 x 385/65 R22.5, brand manufacturer; 6 steel rims, factory silver. Flooring: approx. 30 mm phenolic plywood, cross joints with Omega insert for high point loading, forklift axle load up to max. 7,100 kg. Front wall / corner posts: 25 mm aluminium hollow profile, 1,950 mm high; steel corner posts in high-volume version plus 2 center supports as “Crash Blocker” (mounted inside lower area at approx. 140 mm). Sideboards: 25 mm aluminium hollow profile, 700 mm high. Paintwork: chassis hot-dip galvanized including passivation ("15-year anti-corrosion warranty"). Aluminium sideboards anodized. Subject to errors and changes. Ksdpfx Ajtcwmijikodp

Stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, lastna masa: 6.575 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 07/2011, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.300 mm, skupna dolžina: 13.650 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, stanje pnevmatik: 30 odstotek, medosna razdalja: 1.360 mm, Leto izdelave: 2011, Oprema: ABS, Rabljen odprt polpriklopnik Jeklena sprednja stena z izbočenjem za dolge jeklene profile Tla okrepljena z jeklenimi profili Stranski žepki za stebričke Skladiščna škatla za vstavljive stebričke Kodsy Ercbepfx Aikedp

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33901014232, lastna masa: 5.900 kg, največja dovoljena obremenitev: 29.100 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2025, dolžina tovornega prostora: 13.650 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 2.638 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", barva: srebrn, The images are archive photos! The vehicle may still be in use! Chassis: Semitrailer for Freight Forwarding Fine-grained steel welded construction, fifth wheel plate with interchangeable 2" king pin Drive-over and suitable for use with construction/agricultural machinery up to max. 24,000 kg GVW and up to a maximum machinery width of 2480 mm (the track width of machines or vehicles to be transported must not exceed 2200 mm), hook-in bar for aluminium ramps at the rear (wider construction/agricultural machinery must not be loaded) Outer frame in new slightly angled design with "Load-Lock Profile" for lashing strap attachment 14 pairs of recessed lashing rings in the outer frame, each rated at 2.5 t 6 pairs of recessed lashing rings in the outer frame, each rated at 5 t 24 t, 2-speed landing gear, single-sided operation, with straight base, without crossbar equalizer Free landing gear foot dimension or free swing radius to the rear approx. 1920 mm Rear support foldable 2x wheel chocks with holder Side underrun protection aluminium Rear underrun protection steel Quarter mudguards in front of and behind each axle With anti-spray splash guards behind each axle 1x spare wheel holder for 1 spare wheel, with fixing kit 1x spare wheel, same make as standard tires, steel rim Axles + Suspension SAF drum brake axles "Axle/chassis laser alignment" - reduces tire wear and fuel consumption Air suspension 1st axle is an automatic lift axle, additionally electronically controllable from the truck, incl. forced lowering and starting aid, no installation required on the truck (starting aid functions up to an axle overload of 30% and up to a speed of max. 25 km/h) Braking System 2-line compressed air braking system Color-coded piping for easy maintenance Spring-actuated parking brake 2 foolproof coupling heads front, without connecting line 24 Volt EBS, Electronic Braking System with EBS socket at the front, without connecting cable Important: The drawbar trailer may only be towed by tractor units that ensure the effectiveness of ABS! With lift & lower valve Vehicle - Driving Stability System "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via tractor unit's screen via EBS, no truck installation (requirement must be met by the tractor unit. Only for standard tires) Kdjdpfxoxb D Swo Aikjp Wheels and Tires 235/75 R17.5 twin tires Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side amber LED lighting Side amber LED lighting connected to indicators "flashing side markers" 2 white LED position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin foolproof sockets at the front, without connecting cable Floor Phenolic plywood panels approx. 30 mm thick, for high point load capacity, forklift axle load up to max. 5,600 kg Front wall / Front corner posts 25 mm aluminium hollow profile, 1,350 mm high, corner stanchions steel, volume design Front wall additionally covered on inside with 1,250 mm high phenolic plywood panel Frame hot-dip galvanised The images are archive photos! The vehicle may still be in use!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33901014200, lastna masa: 6.700 kg, največja dovoljena obremenitev: 28.300 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, višina nakladalnega prostora: 900 mm, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 2.500 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, barva: sivo-črna, Chassis, semi-trailer, forwarding version Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin Outer frame slightly chamfered, new design with "Load-Lock profile" for securing strap hooks 24 t, 2-speed landing gear, single-sided operation, with straight base, without telescopic adjustment Free landing leg corner dimension or free rear swing radius approx. 1920 mm 2 wheel chocks with holders Side underrun protection, aluminium Rear underrun protection, steel Quarter-shell mudguards in front of and behind each axle Spray flaps in front of the 1st axle and behind each axle with anti-spray, according to EC 1 lockable plastic toolbox, w=600 / h=425 / d=460 mm (lock not included) Axles + Suspension SAF drum brake axles "Axles/chassis laser alignment" reduces tyre wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and start assist, operated by "3x braking" (start assist is active up to a 30% overload on the axle and up to a maximum speed of 25 km/h) Axle lift below recommended driving height, therefore no warranty for tyre damage Brake system 2-line compressed-air brake system Colour-coded line routing for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! With raise & lower valve Vehicle dynamic stability system Wheels and tyres 235/75 R17.5, brand according to manufacturer's choice Steel rims, factory silver Electrics 24 V, multi-chamber lamps, yellow LED side marker lamps 2 white marker lamps at the front 2 white/red lane marker lamps at the rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connecting cable Floor Phenolic plywood approx. 30 mm thick, for high point load capacity, suitable for forklift axle load up to max. 5,600 kg Front wall / front corner posts 25 mm aluminium hollow section, 1,350 mm high, front corner posts in steel, volume design Country of registration / plates Germany With Dekra inspection and certificate (according to §13 EC FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame: DB 7350 Novagrau Front corner posts: hot-dip galvanized Ksdpfxsza A Txo Aiksdp Front wall: aluminium

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902028859, lastna masa: 5.660 kg, največja dovoljena obremenitev: 29.340 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 13.700 mm, skupna širina: 2.550 mm, skupna višina: 3.700 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, barva: rdeča, Chassis Semi-Trailer for Freight Forwarding Steel welded construction in reinforced design, only two longitudinal beams as double T-beams with steel/checker plate between the beams. Fifth wheel plate with replaceable 2" king pin. Protective cover for rear lights. 8 pairs of lashing rings, bolted or welded to the frame as per manufacturer’s choice. 24 t two-speed landing gear, single-sided operation, with straight base, without compensating leg. Wheel chocks with holders. Side underrun protection in aluminium. Rear underrun protection in galvanized steel. Half-shell mudguards with anti-spray flaps according to EC specifications. 1 spare wheel holder for 1 spare wheel, incl. wheel fixing kit. 1 toolbox recessed between the longitudinal beams. 8 wooden stake pockets, as per manufacturer’s preference, bolted onto the frame, each with 2 telescopic wooden stakes adjustable from 1800 mm to 2800 mm, 7 t per pair. Axles + Suspension BPW disc brake axles with 430 mm disc diameter. Air suspension with lift & lower valve, axle safety cables. First axle with automatic lift, incl. forced lowering and start assist, activated by “3x brake” (start assist functions up to 30% axle overload and up to 25 km/h). Axle spacing offset 1410/1310 mm (suitable for combined transport) up to 44 t gross train weight. Wheels and Tyres 385/65 R 22.5" Manufacturer’s choice. Steel rims, factory silver. Brake System 2-line compressed air brake system. Spring-type parking brake. Axle load detection via EBS CAN-bus signal for display in truck cab (truck must be equipped accordingly, no truck installation, not a verified scale). 2 front coupling heads, non-interchangeable, without connection line. Kdjdpfjza Anvox Aikop EBS (Electronic Braking System) with front EBS socket, without connecting cable. Note: The trailer may only be towed by tractors that can guarantee ABS effectiveness! “Safe Parking.” Electrical System 24 Volt, multi-chamber tail lights, side LED marker lamps in yellow. 2 white position lamps front. 2 white/red lane-control lamps rear. 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connection cables. Front Bulkhead/Corners Steel/mesh bulkhead, approx. 2,300 mm high, bolted to frame. Approval / Signage Registration country: Germany Type approval according to EC 2007/46 Prepared for single-row license plate holder Contour marking with reflective tape per ECE R 048, white on sides, red at rear Warning sign per ECE-70 Paintwork Frame: DB 7350 Novagrau Landing gear legs: black coated Bulkhead: hot-dip galvanized

Stanje: novo, največja dovoljena obremenitev: 26.100 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Vehicle / Body: Low-bed semi-trailer First registration: New vehicle Gross weight: 35,000 kg / 47,000 kg Unladen weight: 8,900 kg Payload: 26,100 kg / 38,100 kg Overall length: 13,300 mm Loading length: 9,200 mm Width: 2,520 mm Loading height: 900 mm Further information Chassis: Low-bed semi-trailer Steel welded structure, fifth wheel plate with replaceable 2" king pin and two king pin positions (not in combination with forced steering) 24 t 2-speed landing gear, single-sided operation, with straight lower part, without thrust compensation Rear support foldable 2 wheel chocks with holders Side underrun protection, aluminium Full-width rear mudflap Mud flaps with anti-spray in front of the 1st axle and behind each axle, in accordance with EU regulations 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable width to 3,000 mm (not at the rear taper) (Note: The track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Compartment for wooden planks on neck, transverse at front 70 mm wooden planks for extension to 3,000 mm Excavator arm recess over rear axles, extending to the rear, approx. 3,000 mm long, 650 mm wide, and 230 mm deep 2 pairs of lashing holes, each rated 5 t, in the excavator arm recess on side of main frame, approx. 300 mm from front and some 200 mm before rear taper Lashing points low-loader 11 pairs of lashing mushrooms, integrated top and side of the outer frame, each 10t 2x on gooseneck 9x distributed on load floor 2 pairs of lashing eyes front on gooseneck, each 5t 3 pairs of swivel lashing eyes on gooseneck, each 5t 2 pairs of folding lashing eyes additionally embedded in load floor, each 10t 1x at beginning of load floor 1x at end of rear taper 1 pair of preparation on the slope from gooseneck for 6.7t screw-on lashing eye (JDT) 8 pairs of ring lashing eyes recessed in outer frame, each 5t (convertible to stanchion pockets) 1 pair screw-on lashing eyes, each 6.7t (JDT), with large flange plate incl. thread as counternut Axles & suspension SAF or BPW drum brake axles, manufacturer's choice “Axle/chassis laser alignment” to reduce tire wear and fuel consumption Last axle is self-steering, with automatic reversing lock via reversing light and additional manual lock function via push button on vehicle Air suspension Wheels and tires 235 / 75 R 17.5" Manufacturer's choice Steel rims, twin configuration, factory silver Braking system 2-line compressed air brake system Coloured line routing for easy service Spring-loaded parking brake 24 Volt EBS, electronic braking system with EBS socket at front, without connecting cable Note: The trailer may only be towed by tractor units that ensure effective ABS functionality! 2 coded coupling heads at front, without connecting line With lift & lower valve Axle load detection via EBS-CAN-bus signal, for display in cab, truck must be appropriately equipped, no truck installation (not a calibrated scale) Vehicle stability control system Tire pressure monitoring system according to ECE R 141, display in tractor cab via EBS, truck installation required Electrics 24 Volt, multi-chamber lights, side yellow LED lighting Side yellow LED lighting linked to indicator "flashing side markers" 2 white position lights at front Kdsdpfjut Idnsx Aikjp 2 white/red lane marker lights at rear 2x 7-pin coded sockets at front, without connecting cable 1 LED revolving beacon

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902037809, lastna masa: 7.722 kg, največja dovoljena obremenitev: 31.278 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R19,5", stanje pnevmatik: 100 odstotek, barva: bela, Pozor: Slike so arhivske! #Šasija, sedlo, prevoz Kontejner za tuljave, dolžina približno 8.040 mm, 8 nosilcev za tuljave, dimenzije 80 x 50 x 1200 mm za kontejner za tuljave ali 70 x 40 mm za vstavljanje v zunanji okvir, 4 para notranjih žepov za tuljave, dimenzije 82 x 52 mm, pokrov za tuljave s ploščami s sitotiskom in prečnimi letvami 1 par adapterjev za pritrditev, vstavljivi na nosilec za tuljave Kontejner za tuljave, ojačana izvedba 4 pari "Vario-Lash" prstnov za pritrditev, za uporabo v "Load-Lock profilu", vsak z nosilnostjo 6 ton, ločeno 7 parov dodatnih prstnov za pritrditev, vgrajenih v zunanji okvir, vsak z nosilnostjo 5 ton 4 pred in 3 za kontejnerjem za tuljave 9 parov prstnov za pritrditev, vsak z nosilnostjo 5 ton, vgrajenih v območju kontejnerja za tuljave Kdjdpfxszl D Iye Aiksp 1 par pritrdilnih točk na vzdolžnem nosilcu pred kontejnerjem za tuljave, vsaka z nosilnostjo 5 ton Paletni predal za 8 euro palet, pred 1. osjo Paletni opora, robustna izvedba, na obeh straneh pritrjena z vijaki, višina približno 15–20 mm, z možnostjo pritrditve na približno vsakih 380 mm 1 nosilec za rezervno kolo za 1 kolo, z kompletom za pritrditev kolesa, na desni strani, pozor na razdaljo od tal 2 plastična orodjarna omara, širina 600 / višina 425 / globina 460 mm, z zaklepanjem Nosilec za vgrajeni viličar na zadnji strani, pocinkana izvedba 5 parov žepov za letve, vgrajenih v zunanji okvir, notranje dimenzije približno 72 x 42 mm, žepi za letve so primerni za pritrditev letev za tuljave, če so zasukane za 180° 3 žepi za letve, vgrajeni v sredino tal, notranje dimenzije približno 72 x 42 mm (ne v območju kontejnerja za tuljave), žepi za letve so primerni za pritrditev letev za tuljave, če so zasukane za 180°, 2 pred kontejnerjem za tuljave (1 skupaj z zunanjim okvirjem) in 1 za kontejnerjem za tuljave #Osi in vzmetenje SAF osi s kolutnimi zavorami "Osno/podvozje laserjsko izmerjeno" – zmanjšanje obrabe pnevmatik in porabe goriva "TIS-Tyre Inflate System", avtomatski sistem za nadzor tlaka v pnevmatikah in polnjenje Zračno vzmetenje 1. os, avtomatska dvižna os, dodatno elektronsko upravljana z vozilom, vključno z možnostjo prisilnega spuščanja in pomočjo pri speljevanju #Zavorni sistem Dvotokni zračni zavorni sistem Barvna oznaka cevovodov za lažje vzdrževanje Aluminijasta zračna rezervoar Zavora s pomnilnikom, ki ostane vklopljena z ventilom za dvig in spuščanje + funkcijo samodejnega ponastavitve AAC Basic, avtomatska razbremenilna os, ki deluje na zadnjo os, kot pomoč pri manevriranju, do 20 km/h Wabco SmartBoard, za prikaz podatkov o vozilu, kot so obremenitve osi, prevožena razdalja in diagnostične/sistemske opozorila Prepoznavanje obremenitve osi preko signala EBS-Canbus #Kolesa in pnevmatike 435/50 R19,5", aluminijasto platišče, polirano #Elektrika 2 x 7-polni in 1 x 15-polni vtič, zaščiteni pred napačnim priključitvijo, na sprednji strani, brez povezovalnega kabla 2 x 7-polni vtič na levi strani zadaj za vgrajeni viličar #Talna obloga Plošče s sitotiskom, debeline približno 30 mm, za visoko točkovno nosilnost za os viličarja do največ 5.600 kg #Sprednja stena / Kotne letve na sprednji strani 2 para prstnov za pritrditev na kotnih letvah sprednje stene, znotraj levo in desno, na približno 400 mm in na približno 1000 mm višine Predal v sprednji steni, dostopen od znotraj #Srednje letve 3 pari drsnih letv, ki jih je mogoče premikati po celotni dolžini 5 parov položajev letv 6 adapterjev za podaljšanje drsnih letv + približno 25 mm, na adapter #Vstavne letve

Stanje: rabljeno, številka stroja/vozila: WFDFLT33802021791, lastna masa: 6.433 kg, največja dovoljena obremenitev: 28.567 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2017, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 445/45 R19,5", barva: črn, Pozor: Slike so arhivske! Vozilo je po potrebi še v uporabi! #Podvozje prikolice Jeklena konstrukcija iz fino zrnatega jekla, varjena, ploščad prikolice z zamenljivo 2" kraljevsko pin, zunanji okvir rahlo nagnjen z "Load-Lock" profilom za pritrditev zategovalnih trakov, 24 ton. 2-stopenjska podorna opora, upravljanje z ene strani, s polkrožnim spodnjim delom in ravno priključno ploščo, z izravnavo nagiba, proizvajalec Jost, 2-stopenjska izvlečna lestev na zadnji strani, zaklep vrat na boku, klini za podpiranje z držalom, bočni zaščitni okvir iz aluminija, spodnji zaščitni okvir iz pocinkane jeklene pločevine, špricer na zadnji strani, ki pokriva celotno širino, četrtkrožni odbijači pred 1. osjo in za vsako osjo, s špricnimi odbijači za vsako osjo, "Heavy Blocker" zadnji bočni odbijač + "valjčni odbijač na boku", pritrdilni trak za palete, robustna izvedba, na obeh straneh, varjen, nosilec rezervnega kolesa za 1 kolo, z kompletom za pritrditev kolesa, plastična škatla za orodje, z predalom in vložkom, š=650 / v=520 / g=670 mm, zaklenljiv s ključavnico, škatla za dokumente #Osi + vzmetenje BPW osi s bobnovimi zavorami z 8-luknjično pestjo, "Os/podvozje - lasersko izmerjeno" Zmanjšanje obrabe pnevmatik in porabe goriva, merilnik dviga/števec prevoženih kilometrov v mehanski analogni izvedbi, zračno vzmetenje, 1. os je samodejna dvižna os, vključno s prisilnim spustom in pomočjo pri speljevanju, aktiviranje "3-krat pritisnite zavoro" (pri pomoči pri speljevanju do največ 25 km/h), dodatno upravljanje z gumbom na vozilu #Zavorna sistem 2-vodni pnevmatski zavorni sistem, vzmetna parkirna zavora, 2 varno priključljivi priključni glavi spredaj, EBS proizvajalec Wabco, elektronski zavorni sistem z vtičnico EBS spredaj, z ventilom za dvigovanje in spuščanje, višina vozila v povezavi z dvižno osjo, pri dvignjeni dvižni osi se nosilnost oziroma celotna višina poveča za 50 mm #Kolesa in pnevmatike 445/45 R19,5", proizvajalec po izbiri proizvajalca #Elektrika 24 voltov, večkomorne luči v LED tehnologiji, stranska rumena LED osvetlitev, 2 beli pozicijski svetili spredaj v LED tehnologiji, 2 belo/rdeči svetili za označevanje voznega pasu zadaj v LED tehnologiji, 2 x 7-polne in 1 x 15-polna varno priključljiva vtičnica spredaj #Talna plošča Plošče s sitotiskom, debeline približno 30 mm, prečni nosilci z vložkom v obliki črke omega, na vzdolžnih podnožjih za visoko točkovno nosilnost za viličar, največ 7100 kg #Sprednja stena/kotniki spredaj 2580 mm visoka, kotniki iz jekla, volumenska izvedba, naprava za sprostitev stranske ponjave na sprednji steni, na spodnji notranji strani na višini približno 140 mm, z jeklenim odbijačem, sprednja stena je dodatno obložena s ploščo s sitotiskom, visoko 1250 mm #Srednji kotniki Kdjdpfxszlciie Aiksp 3 pari drsnih kotnikov, drsnih po celotni dolžini, s 4 vložki in na spodnji strani z dolgim žepom #Vložki Aluminijasti ali leseni V-vložki #Zadnja stena/kotniki zadaj Kotniki zadaj iz jekla do spodnjega roba strehe, pritrdilni element za ponjavo z okroglo cevjo in zategovalnikom, zadnja vrata, 2-krilna, z dvema notranjima vrtljivima zapahom #Ponjava Ponjava, z varjenimi horizontalnimi in vertikalnimi trakovi, pritrdilni elementi iz nerjavečega jekla #Streha Drsna streha, zadnji dvig lahko dvignete, z drsno streho od zadaj proti spredaj, L-strešni nosilec za avtomobilsko industrijo, hidravlična dvigala na obeh straneh, na vsakem nosilcu en valj z eno ročno črpalko na nosilcu, dvig za 400 mm, optimalen rob za deževnico na zadnji strani #Odobrit

Stanje: rabljeno, številka stroja/vozila: WFDFLT33502021621, lastna masa: 5.897 kg, največja dovoljena obremenitev: 29.103 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2017, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R19,5", barva: zelen, Pozor, slike so arhivske. Vozilo je morebiti v uporabi! *Podvozje, sedelna prikolica za prevoznike Jeklena konstrukcija iz fino zrnatega jekla, varjena, lahka konstrukcija, sedelna plošča z zamenljivim 2-palčnim kraljevskim čepom. Zunanji okvir rahlo nagnjen z "Load-Lock profilom" za pritrditev zategovalnih pasov. Opozorilo! Za pritrditev pasov v povezavi s stranskimi stenami je treba odpreti stranske stene! 24 t, 2-stopenjski podporni sistem, upravljanje z ene strani, z ravno spodnjo sekcijo, brez bočnega kompenzatorja, iztegnjena lestev na zadnji strani, stranski zavorni mehanizem za vrata, 2 podstavka s pritrdilom Stranski zaščitni element iz aluminija, paletni okvir za 8 euro palet, nameščen pred osmi, pokrov paletnega okvirja črne barve, spodnja zaščita iz pocinkane jeklene pločevine, četrtkrožni blatniki pred 1. osjo in za vsako osjo, z zaščitnimi bloki proti brizganju za vsako osjo, zadnji prečni odbijač "Heavy Blocker" + stranski "valjčni odbijač". Stranski opornik za palete, robustna izvedba, na obeh straneh, približno 15 do 20 mm visok, z možnostjo pritrditve na vsakih 200 mm, višina nakladanja se zmanjša za približno 20 mm, 1 plastični orodjarni predal, z predalom in vložkom, š=650 / v=520 / g=670 mm, zaklepna možnost z obeskom *Osi + vzmetenje SAF osi z diskovimi zavorami, "laserja izmerjeno geometrijo osi/podvozi", zmanjšanje obrabe pnevmatik in porabe goriva, "TIS-Tyre Inflate System", avtomatski sistem za nadzor in napihovanje tlakov v pnevmatikah, zračno vzmetenje, brez dvižne osi. Kdodpfx Aezlcdgeiksp *Zavorni sistem Dvo-vodni zračni zavorni sistem, zavora na vzmet s parkirno funkcijo, 2 vtičnice za priključitev zavor, ki se ne morejo zamenjati, na sprednji strani, brez povezovalnega kabla, EBS, elektronski zavorni sistem z vtičnico EBS na sprednji strani, z ventilom za dvigovanje in spuščanje, sistem stabilnosti vozila med vožnjo. *Kolesa in pnevmatike 385/55 R19,5", proizvajalec po izbiri proizvajalca, jeklena platišča, tovarniška srebrna barva. *Elektrika 24 Volt, večkamrne luči, stranska rumena LED osvetlitev, 2 beli pozicijski svetili spredaj. 2 beli/rdeči stranski gabaritni svetili zadaj, 2 x 7-polna in 1 x 15-polna vtičnica, ki se ne morejo zamenjati, na sprednji strani. *Talna plošča Sitotiskano ploščo, debeline približno 30 mm, prečne letve z vložkom Omega, na vzdolžnih nosilcih za visoko točkovno obremenitev za viličar, nosilnost do maks. 7100 kg. *Sprednja stena/kotniki spredaj 2580 mm visoka, kotniki iz jekla, na spodnji notranji strani na približno 140 mm višine z jeklenim odbijačem. *Srednji kotniki 3 pari drsnih kotnikov, premikajo se po celotni dolžini, z 4 vstavnimi žepi in na spodnji strani z dolgim žepom. 3 pari položajev kotnikov *Vstavne letve Aluminijaste V-vstavne letve *Zadnja stena/kotniki zadaj Kotniki zadaj iz jekla, do spodnjega roba strehe, pritrdilni elementi za ponjavo z okroglim profilom in zateznim mehanizmom za ponjavo. Zadnja vrata, dvo-krilna, z 2 notranjimi vrtljivimi zapornimi mehanizmi. *Ponjava Ponjava, z varjenimi horizontalnimi in vertikalnimi trakovi, zatezni mehanizmi iz nerjavečega jekla. Logotip stranke "Bring" na stranskih ponjavah in zadnjih vratih. *Střecha Pomikajoča se ponjava, zadnji del je dvigljiv, z možnostjo pomika ponjave od zadaj naprej, L-nosilec za avtomobilsko industrijo. EcoLift - dvižna streha, ki se lahko dvigne za približno 380 mm, na obeh straneh, s podporo plinskega vzmetenja. Optimalen trak proti deževju na zadnji strani, na vrhu zadnjega nosilca, nad vrati. *Odobritev / t

Stanje: rabljeno, številka stroja/vozila: WFDFLT33902030001, lastna masa: 6.075 kg, največja dovoljena obremenitev: 32.925 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2023, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 3.940 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R19,5", Pozor, na slikah so arhivske fotografije. Vozilo je lahko še v uporabi! "Preload" z blago prednapetostjo v območju vratu, sedelna plošča z zamenljivim 2" kraljevskim zatičem, zunanji okvir rahlo poševen - nova izvedba s profilom "Load-Lock" za obešanje napenjalnih trakov, 24 t dvostopenjsko podporno dvigalo, enostransko upravljanje. Stranski držalo vrat, zagozde za kolesa z nosilcem, bočna zaščita pred naletom iz aluminija, spodnja zaščita iz pocinkanega jekla, četrtinski blatniki pred 1. osjo in za vsako osjo, z blatom protivodno zaščito za vsako os, zadnji odbijač, obe strani z omejevalnikom za palete približno 15-20 mm visoko, v vijačeni izvedbi, vstopna višina se zmanjša za približno 15-20 mm, plastična orodjarna s predalom in odlagalno polico, š x v x g = 650 / 520 / 670 mm Osovine in vzmetenje: SAF kolutno zavorne osi, "osna/podvozna laserska izmera" za zmanjšanje obrabe pnevmatik in porabe goriva, zračno vzmetenje, 1. os samodejna dvižna os, vključno s prisilnim spuščanjem in funkcijo začenjanja, dvižna os pod priporočeno voznjo višino. Zavorni sistem: Dvovodni pnevmatski zavorni sistem z vzmetnim parkirnim zavorom, 2 nezamenljivi sprednji spojni glavi brez povezovalne cevi, EBS (elektronski zavorni sistem) z EBS vtičnico spredaj, brez povezovalnega kabla. Pozor: s funkcijo dvigovanja in spuščanja, višina vožnje v povezavi z dvižno osjo – pri dvignjeni dvižni osi se nakladalna oz. skupna višina poveča za 50 mm. Kolesa in pnevmatike: 435/50 R19,5", jeklena platišča. Elektrika: 24 voltov, večkomorni žarometi, 2 beli pozicijski luči spredaj, 2 belo/rdeči smerokazi zadaj, 2 x 7-polni in 1 x 15-polni nezamenljivi vtičnici spredaj, brez povezovalnega kabla. Tla: Približno 30 mm debele lepljene vezane plošče na vzdolžnih prečkah za visoko točkovno obremenitev, do največje osne obremenitve viličarja 7.100 kg. Sprednja stena / sprednje stebričke: Višina 2580 mm, jekleni stebrički v volumenski izvedbi, sprostitveni mehanizem za stransko ponjavo na sprednji steni. Sredinski stebrički: 3 para pomičnih stebričkov po celotni dolžini, s 4 vložnimi žepi in spodaj z dolgim žepom. 3 para položajev stebričkov. Vložne letve: Kedpszcmmzefx Aikjdp 5 vrst aluminijastih vložnih letev + variabilne letve. Zadnja stena / zadnji stebrički: Zadnji jekleni stebrički do spodnjega roba strehe, nosilci za ponjavo s cevjo in napenjalnim ragljo zapiralom. Ponjave: Ponjave z vgrajenimi vodoravnimi in navpičnimi trakovi, napenjalni zapiralci iz nerjavečega jekla. Streha: Fliegl-Blitz-Pokrivalo, pomična streha, zadnja stran visoko zložljiva, pokrivalo moč premikati od zadaj naprej, L-strešni nosilec za avtomobilsko industrijo, notranja širina med strešnimi nosilci cca. 2.490 mm, barva ponjave: bela (skupaj s pomično streho spredaj brez prednjega vozička). Država registracije / tablice: Nemčija, certifikat odobritve po EG 2007/46, 24/7-servisna telefonska linija, Fliegl certifikat proizvajalca o strukturalni trdnosti po EN 12642 XL, Fliegl certifikat proizvajalca o trdnosti po DL 9.5, omejevalnik palet na obeh straneh, pribl. 20 mm visok, vstopna višina se zmanjša za pribl. 20 mm, Fliegl certifikat proizvajalca o varnosti tovora po VDI 2700 list 12 ff. Omejevalnik palet na obeh straneh, pribl. 20 mm visok, vstopna višina se zmanjša za pribl. 20 mm, pripravljeno za enovrstni nosilec registrske tablice, opozorilna tabla po ECE - 70, reflektivni trakovi: beli, neprekinjeno spodaj po stranski ponjavi in zgoraj v vogalih, reflektivni trakovi: rdeči, ob robu zadnjega portala. P

Stanje: rabljeno, največja dovoljena obremenitev: 32.700 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2022, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.480 mm, skupna širina: 2.550 mm, Skupna teža: 39.000 kg Lastna teža: 6.300 kg Nosilnost: 32.700 kg Skupna dolžina: 13.850 mm Dolžina nakladalnega prostora: 13.650 mm Širina: 2.550 mm Višina nakladanja: ca. 1.100 mm Dodatne informacije - Notranja višina ca. 2.600 mm - Notranja dolžina ca. 13.650 mm - Notranja širina ca. 2.480 mm - Pnevmatske gume 385/65R22,5 - SAF osi - Zaščita proti podvozu - Priprava za viličarja zadaj - Zračno vzmetenje - Zadnja os krmiljena Kedpfjywq E Sex Aikedp - Drsna streha "Blitz-Verdeck" - Drsni obroči - Vstavljive letvice

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33901014072, lastna masa: 7.300 kg, največja dovoljena obremenitev: 27.700 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.530 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 3.330 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5", stanje pnevmatik: 100 odstotek, barva: srebrn, Chassis Semi-Trailer for Freight Forwarding Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" king pin, main frame reinforced for 25 t at the center of gravity over 3 m loading length in retracted condition 13 pairs of welded hooks on cross members for lashing strap attachment 23 pairs of recessed lashing rings in the outer frame, each rated 3.5 t 24 t 2-speed landing gear in reinforced version for uncoupling when loaded, single-side operation 1 spare wheel holder for 1 spare wheel 1 open storage compartment for stakes, with insertion option behind front wall for storage / or storage in compartment between extended main beams 4 pairs of recessed stake pockets in the outer frame, for square tubes 80x80 mm 5 stake pockets recessed centrally in the floor, for square tubes 80x80 mm, with reinforcement beams, each installed between the outer stake pockets except one 6 lashing/stake rails recessed crosswise in the floor over the full width to the outer frame (max. usable internal width between outer stake pockets approx. 2170 mm), approx. 100 mm high. With 20 mm round steel bars, top and bottom, distance between top and bottom approx. 60 mm (of the round steel). Bottom closed with angle plate, half open downwards. For lashing and plugging stakes, 80 x 80 mm. Rear pull-out ladder on right side in travel direction (FR) 5 x 3 pairs of stake pockets recessed in the outer sides of the main beams, for square tubes 80x80 mm, incl. reinforcement beams 10 “lightweight” plug-in stakes, W=80/D=80 mm, usable height approx. 1850 mm, hot-dip galvanized, with welded lashing points on both ends 2 plastic toolboxes, W=600 / H=425 / D=460 mm, lockable Telescoping Extendable by max. 4,000 mm, lockable at approx. every 500 mm Main frame telescopic Locking with pneumatic pin system + frame lock indicator on both sides, operated via hand button; control for brake/lock and suspension on left in travel direction (FR-left) in front of the axles Storage compartment between the main beams when extended Axles & Suspension SAF disc brake axles with 430 mm disc diameter Last axle is steered, with automatic reverse lock via reversing light and additional lock function on vehicle via hand button Axle spacing offset 1310/1410 mm Air suspension 1st axle with automatic lift, additionally electrically controllable from the truck, with start assist Braking System 2-line compressed air braking system Spring-loaded parking brake 2 anti-mix-up coupling heads at front EBS Wabco, electronic braking system with EBS socket at front With raise & lower valve + auto-reset function Axle load detection via EBS CAN bus signal, for display in cab (truck must be equipped accordingly) Wheels & Tyres 385/65 R 22.5" steel rims Electrics 24 Volt, multi-chamber tail lights, side yellow LED lighting 2 white LED position lights at front 2 white/red LED lane guidance lights at rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at front 1 beacon with bracket, switchable via parking light 2 pairs of warning panels, LED illuminated and extendable to 3,500 mm Flashing side marker lights Side 7-pin sockets, positioned 2x at front panel, 2x at landing gear, 2x at rear underrun protection 1 additional 7-pin socket in the rear underrun protection Kjdpfsza Dyyox Aikjdp 2 additional LED work lights, mounted top inside at front wall, with switch on front wall outside, left in travel direction (FR-left) Screen-printed wooden flooring approx. 30 mm thick 25 mm aluminium hol

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 6.200 kg, največja dovoljena obremenitev: 32.800 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 445/45 R19,5", stanje pnevmatik: 100 odstotek, barva: originalen, Leto izdelave: 2026, Prihranite pri stroških transporta! Po želji dostavimo do tri prikolice za transport zaves, zasnovane za varčno shranjevanje v obliki sklopa treh prikolic. Streha in stranske ponjave so priložene ločeno in se po dostavi enostavno namestijo. Tako boste uživali v znatno nižjih stroških transporta. Kdodpozmub Hofx Aikop Rešitev za transport, prilagojena vašim potrebam Konfigurirajte svoje vozilo Fliegl glede na vaše zahteve. Prikazano vozilo je zgolj primer. Proizvodnja in oprema potekata individualno, glede na želje stranke. #Šasi - sedelna prikolica - transport Fine jeklene varjene konstrukcije, z blago prednapetostjo v območju vrat, sedelna plošča z zamenljivim 2-palčnim kraljevskim členkom Zunanji okvir rahlo nagnjen, nova izvedba z "profilom za pritrditev pasov" za pritrditev zategovalnih pasov 24 t, 2-stopenjski dvigalni mehanizem, upravljanje z ene strani Izvlečna lestev na zadnji strani Stranske zaščite Podvozna zaščita, pocinkano jeklo Zaščita na zadnji strani 1 plastični orodjarni kovček, š=600 / v=425 / g=460 mm 1 predal za gasilni aparat do 6 kg #Osi + vzmetenje Osno vzmetenje s kolutnimi zavorami "Osno vzmetenje lasersko merjeno" zmanjšanje obrabe pnevmatik in porabe goriva Zračno vzmetenje 1. os – avtomatska dvižna os, vključno s prisilno spuščanjem in pomočjo pri speljevanju, upravljanje "3-krat pritisnite zavoro" #Zavorna sistem 2-vodni zračni zavorni sistem Barvno označene vodne povezave za enostavno vzdrževanje Zavora s pomnilnikom vzmetne energije 2 varno nameščene sklopke na sprednji strani, brez povezovalnega kabla EBS, elektronski zavorni sistem z vtičnico EBS na sprednji strani z ventilom za dvig in spuščanje Višina vozila v povezavi z dvižno osjo; pri dvignjeni dvižni osi se nosilnost oziroma skupna višina poveča za 50 mm Sistem stabilnosti vozila #Kolesa in pnevmatike 445/45 R19,5", jeklena platišča, tovarniška srebrna barva #Elektrika 24 voltov, večkomorne luči, stranska rumena LED osvetlitev 2 beli pozicijski svetili na sprednji strani 2 beli/rdeči markerji na zadnji strani 2 x 7-polni vtičnici na sprednji strani #Tla Plasti iz sitotiska, debeline približno 30 mm, nameščene na vzdolžnih nosilcih za visoko točkovno nosilnost, nosilnost osi viličarja do največ 7100 kg Na zadnji strani jeklena/valovita pločevina, nameščena na dolžini približno 300 mm #Sprednja stena / stranski nosilci na sprednji strani 2580 mm visoka, stranski nosilci iz jekla, robustna izvedba, naprava za odpenjanje stranske ponjave na sprednji steni, "Zavora proti trčenju", na spodnji notranji strani na višini približno 140 mm, jeklena zaščita proti trčenju Sprednja stena je dodatno obložena s plastjo iz sitotiska, visoko 1250 mm #Srednji nosilci 3 pari drsnih nosilcev, drsno nastavljivi po celotni dolžini, s štirimi vstavnimi žepi in na spodnji strani z dolgim žepom 3 pari položajev nosilcev 4 vrste aluminijastih V-vstavnih letvic #Zadnja stena / stranski nosilci na zadnji strani Stranski nosilci na zadnji strani iz jekla do spodnjega roba strehe, pritrdilni elementi za ponjavo z okroglim cevovodom in zategovalnim mehanizmom za ponjavo Zadnja vrata, dvočna z dvema notranjima vrtljivima ključavnicama #Ponjava Ponjava z varjenimi horizontalnimi in vertikalnimi pasovi Zategovalni mehanizmi iz nerjavečega jekla #Streha Drsna ponjava, zadnji del je dvižen, ponjava drsi od zadnje proti sprednji strani, L-strešni okvir za avtomobilsko industrijo Streha neelastična, minimalno upogibanje strešnega okvirja pri nakladanju in razkladanju Optimalna dežna letva na zadnji strani,

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 6.000 kg, največja dovoljena obremenitev: 32.000 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.790 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, barva: originalen, Leto izdelave: 2026, Prihranite pri stroških transporta! Na zahtevo dostavimo do tri platforme, zložene v varčno strukturo treh platform. Tako boste uživali v bistveno nižjih stroških transporta. Rešitev za transport, prilagojena vašim potrebam Konfigurirajte svoje vozilo Fliegl glede na vaše zahteve. Prikazano vozilo je zgolj primer. Proizvodnja in oprema potekata individualno, glede na želje stranke. #Podvozje, sedlo, prevozniška služba Finozrnat jekleni varjeni okvir, sedelna plošča z zamenljivim 2-palčnim kraljevskim členom Zunanji okvir, rahlo nagnjen, nova izvedba z "Load-Lock-profilom" za pritrditev jermena 24 ton, dvostopenjska podpora, upravljanje z ene strani, s polkrožnim spodnjim delom in ravno priključno ploščo, z izravnavo nagiba Opomba: Svoboden kot opore ali svoboden kot nagiba nazaj, pribl. 1930 mm Izvlečna lestev na zadnji strani Zaklep za vrata na strani 2 podstavka z držalom Stranski zaščitni odbijač iz aluminija Spodnji zaščitni odbijač iz pocinkane jekla Kdjdpfx Aiszmtc Aekjp Četrtaste blatnike spredaj in za osjo z zaščitnimi plošči proti brizganju, v skladu z EG Zaščitni odbijač na zadnji strani 2 nosilca za rezervno kolo za 1 kolo, z kompletom za pritrditev kolesa 1 rezervno kolo, proizvajalec enak kot pri osnovnih pnevmatikah, jeklena felna 1 plastični orodjarni kovček, š=600 / v=425 / g=460 mm, zaklenljiv #Osi + vzmetenje BPW osi s kolutnimi zavorami s premerom koluta 430 mm "Osno/podvozje lasersko merjeno" - zmanjšanje obrabe pnevmatik in porabe goriva Zračno vzmetenje 1. os: avtomatska dvižna os, vključno s prisilnim spuščanjem in pomočjo pri vožnji, upravljanje z "3-kratno zaviranje" (pomoč pri vožnji deluje do preseganja obremenitve osi za 30 % in do hitrosti največ 25 km/h) #Zavorna sistema Dvo-vodna zračna zavora Barvno označena vodila za lažje vzdrževanje Zavora na vzmet z zadrževalno funkcijo 2 varno nameščena priključka spredaj, brez povezovalnega kabla EBS, elektronski zavorni sistem z vtičnico EBS spredaj, brez povezovalnega kabla Pozor: Prikolico sme vleči samo vlečna vozila, ki zagotavljajo učinkovitost ABS! z ventilom za dvig in spuščanje Vozilo - sistem za stabilnost vožnje #Kolesa in pnevmatike 385/65 R22.5", jeklene felne, srebrna barva #Elektrika 24 Volt, večkamerske luči, stranske rumene LED luči 2 beli pozicijski svetili spredaj 2 belo/rdeči stranski svetili zadaj 2 x 7-polne varno nameščene vtičnice spredaj, brez povezovalnega kabla #Pod Plasti, natisnjene s sitotiskom, debeline cca 30 mm, na 8 vzdolžnih podporah za visoko točkovno nosilnost, do maksimalne obremenitve osi viličarja 7.900 kg Na zadnji strani jeklena/valovita pločevina, nameščena na cca 300 mm dolžine #Sprednja stena / vogalni okviri spredaj 135 cm visoka, vogalni okviri iz jekla, v izvedbi s polno prostornino, pritrdilni mehanizem za stransko ponjavo na sprednji steni, "Crash-Blocker", na spodnji notranji strani na cca 140 mm višine z jeklenim zaščitnim odbijačem #Država registracije / Tablice Nemčija Odobritev po EG 2007/46 24/7 servisna telefonska številka opcijsko nakladanje v paketu 3 kosov vključno z pritrditvijo in varovanjem tovor Proizvajalčev certifikat Fliegl o konstrukcijski trdnosti po EN 12642 XL Opozorilna tabla po ECE - 70

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902035352, lastna masa: 6.460 kg, največja dovoljena obremenitev: 32.540 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 40.000 mm, vzmetenje: zrak, velikost pnevmatike: 445/45 R19,5", stanje pnevmatik: 100 odstotek, barva: originalen, Pozor: Slike so arhivske! #Šasi, pete za sedelno prikolico, transportno podjetje Fino zrnata jeklena varjena konstrukcija, plošča za sedelno prikolico z zamenljivim 2-palčnim kraljevskim zatičem Izvedba za prevoz z vlakom/tovor na železnici Koda za pritrditev tovora za prevoz z vlakom XL sestavljena iz 4 prijemnih robov Skupna višina vozila v najvišji točki pri spuščenem zračnem vzmetenju največ 4000 mm pri uporabi prikolice z "žepom", na 880 mm oporni nogi, koda za železniški promet P400 Ponjava z integriranim zaščitnim robom za prijemala v skladu s specifikacijami "DB". PRO SLIDE, dodatna vodilna plošča spredaj levo in desno pred kraljevskim zatičem "Heavy Push Frame", zunanja ojačitev okvirja na prečnem nosilcu za intenzivno stransko obremenitev 1 par podpornih nog z zobniškim pogonom zadaj, s pravim spodnjim delom in enostranskim upravljanjem na desni strani (FR). 4 pari priveznih ušes, označeni z rumeno barvo Stranska zaščita palet v robustni izvedbi, na obeh straneh, povsem privita Predal za 32 vložkov, na obeh straneh (16 kosov na stran), pod nosilno površino 1 dokumentna škatla, 36x26x4 cm #Osi + vzmetenje SAF osi s kolutnimi zavorami kot os za kombinirani promet, z jekleno vrvjo kot zaščito pred prevelikim spuščanjem ali alternativno konstrukcijo "Lasersko merjenje osi/podvozij", zmanjšanje obrabe pnevmatik in porabe goriva Zračno vzmetenje #Zavorni sistem Dvojno vodni zračni zavorni sistem Barvno označene vodne povezave za enostavno vzdrževanje Zavora na vzmet, samodejno vključena 2 varno nameščena priključna glavna cilindra spredaj + zračne povezave tipa C + CA (GB) EBS, elektronski zavorni sistem z vtičnico EBS spredaj z ventilom za dvigovanje in spuščanje Sistem za stabilnost vozila med vožnjo Kazalnik obrabe zavor prek informacijskega centra prikolice in prikaz podatkov o vozilu, kot so obremenitev osi, prevožena razdalja in diagnostična/sistemska sporočila Sistem za nadzor tlaka v pnevmatikah, prek EBS #Kolesa in pnevmatike Kjdpjzl D Rzjfx Aikedp 445/45 R19,5", proizvajalec Continental Jeklena platišča, tovarniška srebrna barva vključno z zaščitnimi pokrovčki za vijake na kolesih #Elektrika 24 Volt, 4 x 3-komorne luči + 1 okrogla luč za vzvratno vožnjo in + 1 okrogla luč za meglo 2 beli/rdeči stranski gabaritni luči zadaj 2 x 7-polne in 1 x 15-polna varno nameščena vtičnica spredaj 2 dodatna LED delovna svetila zadaj #Pod Plošče, izdelane z metodo sitotiska, debeline približno 30 mm, nameščene na vzdolžnih nosilcih za visoko točkovno nosilnost za viličarje, nosilnost osi viličarja do največ 7100 kg "Premium zaščitni premaz tal", talna obloga, po celotnem obodu zatesnjena #Stranski nosilci 3 pari drsnih stranskih nosilcev, ki se lahko premikajo po celotni dolžini, z 4-kratnimi vložki in spodaj z dolgim žepom. 3 pari položajev stranskih nosilcev #Vložki 5 vrst aluminijastih V-vložkov #Ponjava Ponjava z varjenimi horizontalnimi in vertikalnimi trakovi vključno s 3 x žepi za dokumente na vsaki strani Zatezni mehanizmi iz nerjavečega jekla #Streha Drsna ponjava, zadnji del je dvigljiv, ponjava se lahko pomika od zadaj proti spredaj, L-nosilec za avtomobilsko industrijo, notranja širina med nosilci strehe približno 2490 mm, barva ponjave: bela Strešna ponjava z 5-kratno zaščito na prečnih nosilcih strehe, torej z 5 zaponkami na vsakem prečnem nosilcu tudi vsak drugi prečni nosilec ima kavljek za pritrditev strehe Streha je neelastična, ob nakladanju in razkladanju se nosilec strehe komaj upogne optimalna odbijačna letvica zadaj, na vrhu zadnjega nos

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 4.840 kg, največja dovoljena obremenitev: 21.160 kg, skupna masa: 26.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 12.050 mm, širina tovornega prostora: 2.550 mm, skupna dolžina: 12.200 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", Customised transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown serves as an example. Production and equipment are individually tailored to customer specifications. Kjdpfxszb Ikfe Aiksdp Chassis: Semi-trailer for freight forwarding Fine-grain steel welded construction, fifth-wheel plate with replaceable 2" kingpin, reinforced attachment point for 'gallows' mount and robust wear plates around the area. Rear coupling rail for aluminium ramps. Outer frame: Slightly tapered, new design with 'Load-Lock profile' for lashing strap attachment. 'Patented Load-Lock-Cross' for lashing strap attachment, cross-member beneath the outer frame, 24 t. 2-speed landing gear, single-sided operation, with straight lower section, without compensating cylinder, free landing leg base or free rear swing clearance approx. 1920 mm, without supports, 2 wheel chocks with holders, aluminium side underrun protection, steel rear underrun protection, quarter-round mudguards in front of and behind each axle, without impact guard, spare wheel holder for 1 spare wheel, with wheel fixing kit, spare wheel matching main tyre brand, steel rim. Plastic toolbox with shelf, width=620/height=360/depth=440 mm, lockable with padlock. Axles & Suspension: Drum brake axles, axles/chassis laser-aligned to reduce tyre wear and fuel consumption. Non-steering, air suspension, without lift axle. Brake system: 2-line pneumatic brake system. Colour-coded piping for easier maintenance, spring-loaded parking brake. 2 non-interchangeable coupling heads front, without connecting line, EBS (Electronic Braking System) with EBS socket at the front (no connecting cable). Note: The trailer may only be towed by tractors capable of ensuring ABS efficacy! With raise/lower valve, vehicle stability control. Wheels & Tyres: 205/65 R17.5, make at manufacturer's discretion, rated for 8 t axle load at 80 km/h, steel rims, factory silver. Electrics: 24 Volt, multi-chamber lights, yellow LEDs on the sides, 2 white position lamps at the front, 2 white/red lane-keeping lamps at the rear, 1 x 15-pin socket front (no connecting cable), LED work lamp in angled section (switched via reversing light), if technically feasible, additional LED work lamp at rear, switched via reversing light. Floor: Anti-slip phenolic plywood panels, approx. 30 mm thick, high point load capacity for forklift axle load up to max. 5600 kg. Front wall / Front corner stanchions: 25 mm aluminium box section, 1,350 mm high, steel corner stanchions in volume design. Customised transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown serves as an example. Production and equipment are individually tailored to customer specifications.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902024358, lastna masa: 6.149 kg, največja dovoljena obremenitev: 28.851 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.790 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", barva: modra, The images shown are archive photos; the vehicle may still be in use! Chassis Semi-trailer Haulage Fine-grain steel welded construction, fifth wheel plate with interchangeable 2" kingpin Outer frame slightly inclined with 'Load-Lock profile' for lashing strap attachment Note! To hook in the straps in conjunction with drop sides, the side walls must be opened! Pair of lashing eyes additionally flush-mounted in the outer frame, each rated to 2.5 t 24 t, two-speed landing gear, single-sided operation, with straight lower section, without compensating mechanism Pull-out ladder at rear Side door retainers Wheel chocks with holder Kdsdpfowyiw Eex Aiksp Pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free landing leg corner dimension or rearward swing clearance approx. 1930 mm Rear underrun protection, steel, galvanized Full-width rear mudflap Half-shell fenders With anti-spray mudflap only on the last axle Rear collision protection 'Blocker' – transverse galvanized steel angle as forklift and rear door hinge protection Pair of ferry rings, yellow marked Pallet stops on both sides, approx. 15–20 mm high, bolted design (loading height reduced by approx. 15–20 mm) Spare wheel holder for one spare wheel, complete with fixing kit, basket design by Schoch! Spare wheel, same make as original tyres, steel rim Stainless steel toolbox, w=600/h=400/d=500 mm, with polished, lockable door Stake pockets Right side: 5 rows of aluminium V-insert slats Left side: no insert slats Rear wall / Rear corner posts Rear corner posts steel, up to roof edge, lashing for tarpaulin with round tubes and tensioning ratchet Rear portal doors, double-leaf, each with 2 internal bar locks Tarpaulin Tarpaulin with integrated horizontal and vertical belts Quick Lock system for side curtain with central locking, one-sided on left Tension locks in stainless steel on right duty-free cable all around, with holder on front wall (no customs lock, not in conjunction with Quick Lock) Customer branding on side curtains and rear portal Tarpaulin with high-strength built-in spring steel strips, left side (note: no insert slats on left when equipped) Roof Sliding roof, rear end lift-up, can be pushed open front-to-rear, tarpaulin colour: white EcoLift – lifting roof, raisable by approx. 380 mm on both sides, with gas strut assistance, Optimum rear rain rail, top of rear bow, above doors Paintwork Frame: hot-dip galvanized with passivation Landing legs: black coated Front corner posts: galvanized and painted to front wall colour Front wall: MB 5328 blue Rear corner posts: galvanized and painted to rear wall colour Rear wall: MB 5328 blue Tarpaulin: RAL 5010 gentian blue Pallet box lid: RAL 2011 deep orange The images shown are archive photos; the vehicle may still be in use!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT34002026856, lastna masa: 5.592 kg, največja dovoljena obremenitev: 29.408 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2020, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", barva: bela, The images are for reference only (archive images)! The vehicle may still be in use! Chassis – Semi-Trailer Haulage Fine-grain steel welded construction in reinforced Scandic design, 5th wheel plate with interchangeable 2" kingpin Outer frame slightly inclined with "Load-Lock profile" for attaching lashing straps Lashing rings for insertion in "Load-Lock Profile", each 6 t, loose 24 t, 2-speed landing gear, single-sided operation, with straight lower part, without compensating rod Free pivoting radius to landing leg approx. 2200 mm, landing leg width approx. 2350 mm Kodpsx Rq Slefx Aikodp 2 Wheel chocks with holder Side underrun protection: Aluminium Rear underrun protection: Galvanised steel Quarter mudguards in front of and behind axle unit With anti-spray mud flaps only on last axle 1 Plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with padlock (padlock not included) 1 pair of stake pockets flush-mounted at the very front in the outer frame/floor, 83 x 83 mm inner dimension 2 detachable stanchions, w=80/ d=80/ l=1200 mm, hot-dip galvanized Note: Stake pockets/insertion stanchions are not suitable for the sole securing of long material, pipes, etc. without strapping 4 pairs of ferry rings, marked yellow Axles & Suspension 3x BPW drum brake axles "Axles/chassis laser measured" reduces tire wear and fuel consumption Air suspension Brake system 2-line compressed air braking system Color-coded line routing for easier service Spring-loaded parking brake 2 foolproof coupling heads at front, without connecting line EBS system manufacturer: Wabco Premium, electronic braking system with EBS socket at front, without connection cable, Wabco Premium incl. open CAN bus for telematics Attention: The trailer may only be towed by tractors which guarantee the effectiveness of the ABS! With lift & lower valve Vehicle – driving stability system Electric 24 Volt, multi-chamber LED lights with resistor, side yellow LED lighting, license plate LED lighting (note: on some tractor units, malfunctions may be displayed although functionality is given) 2 white position lights at front 2 white/red lane marker lights at rear 2x 7-pin foolproof sockets at front, without connector cable Front wall / front corner stanchions 2 at 580 mm high, steel corner stanchions in high capacity version, release mechanism for side curtain at front wall "Crash Blocker", lower inside at approx. 140 mm height with steel impact protection Insert slats Rows of timber insert slats Curtain Curtain with welded-in horizontal and vertical straps Stainless steel over-centre locks Floor Anti-slip phenolic bonded plywood approx. 30 mm thick on longitudinal supports for high point load capacity, suitable for forklift axle loads up to max. 7100 kg Note: Floor warpage due to weather possible (no warranty)! Rear wall / rear corner stanchions Rear corner stanchions steel up to lower edge of roof, hooks for curtain with round tube and curtain tensioning ratchet Rear portal doors, double-leaf, each with 2 internal locking bars Roof Sliding roof, rear end lift-up, roof slides from rear to front, curtain color: white Optimal rear rain guard, on rear hoop, above the doors Country of Registration/Plates Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-line number plate holder Conspicuity marking with reflective strips in accordance with ECE R 048, white on sides and red at rear

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902036561, lastna masa: 5.820 kg, največja dovoljena obremenitev: 29.180 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.740 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", barva: rdeča, The images are sample/archival pictures! The vehicle may currently be in use! Tarp color freely selectable Chassis: Semi-Trailer Forwarder Fine-grained steel welded construction in lightweight design, fifth wheel plate with exchangeable 2" kingpin Slightly angled new design outer frame with "Load-Lock profile" for lashing strap attachment 3 pairs of additional lashing eyes recessed in the outer frame, each rated 2.5 t 14 pairs of additional lashing eyes recessed in the outer frame, each rated 2.5 t 24 t 2-speed landing gear, one-sided operation, with straight base, load equalizing type: SAF Note: Free landing gear foot spacing or free rear swing radius approx. 1930 mm Extendable rear ladder Side door holders 2 wheel chocks with holders Side underrun protection, aluminum Painted in RAL 3002 Carmine Red No warranty for coating/lacquering quality on repainted or coated attachments. Rear underrun protection, galvanized steel Painted in RAL 9010 Pure White, including rear underrun protection brackets No warranty for coating/lacquering quality on repainted or coated attachments. Quarter shell mudguards in front of and behind axle assembly Kedoxbzkkspfx Aikjdp With anti-spray mudflaps according to EU regulations Rear crash protection 1 aluminum ladder approx. 2550 mm, with side holder, behind side underrun protection Mounting rail on outer frame for direct tarp tensioners, bolted design, stands approx. 15–20 mm above loading surface, upper section with perforated profile for lashing straps, load-lock side rail must remain usable (since no lashing eyes). With bottom aluminum drop-in slat usable as stopper! (not in conjunction with sideboards) 2 plastic toolboxes, w = 800 / h = 450 / d = 450 mm 1 each on front left and right, behind the 3rd axle Axles & Suspension BPW disc brake axles with 430 mm disc diameter Wheel hubs painted in RAL 3002 Carmine Red "Axle/chassis laser alignment" to reduce tire wear and fuel consumption Air suspension Brake System 2-line compressed air brake system Color-coded piping for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connector line 24 Volt EBS, manufacturer Wabco, electronic brake system with EBS socket at the front, without connection cable Attention: This trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! With lift & lower valve + auto-reset function Vehicle stability control system Telematics Idem Telemetry incl. LIN battery, coupling sensor and GPS (no contract included, customer must arrange contract). Wheels & Tires 385/65 R22.5, manufacturer as selected by the supplier Polished aluminum rim, make Alcoa Dura-Bright Electrics 24 Volt, multi-chamber lighting units, side yellow LED lighting Lamp carrier painted in RAL 9010 Pure White No warranty for coating/lacquering quality on repainted or coated attachments. 2 white marker lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connector cable LED working lights on both sides (controlled via reverse light), positioned at height of first cross-member behind landing gear 2 additional LED working lights at the rear, controlled via reverse light Tarp Tarp with welded horizontal and vertical belts Customer branding possible on tail portal, tarp color freely selectable

Stanje: novo, največja dovoljena obremenitev: 16.920 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.200 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Skupna teža: 24.000kg/ 30.000kg Lastna teža: 7.080kg Nosilnost: 16.920kg/ 22.920kg Skupna dolžina: 10.825mm Nakladalna dolžina: skupno 8.200mm Širina: 2.5250mm Višina nakladalne površine: 900mm Dodatne informacije plus predhodni prevoz / priprava iz skladišča Wiesmoor 26639, 1.280,00 € / neto Podvozje nizkopodni priklopnik Jeklena varjena konstrukcija Vrtljiva plošča s trdnim krogličnim ležajem, omarica za orodje vgrajena v prednji del vrtljive plošče Zložljive zadnje podporne noge 2 zagozdi za kolesa z nosilcem Bočna zaščita iz aluminija Zadnja blatnika po celotni širini (ni združljivo z nosilcem za viličar) Četrtinski blatniki pred in za 1. osjo z zaščito proti pršenju, zaščita proti pršenju za 2. in 3. osjo 1 nosilec za rezervno kolo z pritrdilnim kompletom 1 plastična škatla za orodje, širina=600 / višina=425 / globina=460 mm, zaklepna Kdodpfxezhhw De Aiksp Razširitve izvlečne do 3.000 mm (ne na zadnji poševnini) (sled širine transportiranih gradbenih strojev ali vozil ne sme presegati zunanjega okvirja 2.550 mm) Shranjevalni prostor za lesene deske na sredini nakladalne površine Lesene deske 70 mm za razširitev na 3.000 mm Pritrdilne točke za nizkopodnik 3 para pritrdilnih točk po 10 t vgrajenih spredaj v tla 6 parov pritrdilnih gobic zgoraj in ob strani zunanjega okvirja po 10 t 1x v predelu vrata ostale enakomerno porazdeljene vmes 1x na zadnji poševnini 5 parov pritrdilnih obročkov v zunanjega okvirju po 5 t (možnost predelave v žepke za kole) 1 par zložljivih pritrdilnih točk dodatno v nizkopodni površini za 3. osjo po 10 t 1 par vijačnih pritrdilnih točk spredaj v kotih po 6,7 t, z veliko pritrdilno ploščo, vključno z navojem kot nasprotnik Vlečna naprava priklopnika z vrtljivo ploščo Vlečna roka s preizkušenim 40 mm vlečnim obročem Preme in vzmetenje Bobnaste premne, izbira proizvajalca "Premne/podvozje lasersko izmerjene" zmanjšujejo obrabo pnevmatik in porabo goriva Zračno vzmetenje s funkcijo dviganja/spuščanja Zavorni sistem Dvovodna zračna zavora Barvno označene cevi za enostavno servisiranje Zavorni zasilni zavorni mehanizem 2 nezamenljivi spojni glavi spredaj z povezovalnimi cevmi do vlečnega vozila 24V EBS, elektronski zavorni sistem z EBS vtikačem spredaj, s povezovalnim kablom Pozor: Priklopno vozilo sme vleči samo vozilo, ki omogoča učinkovitost ABS! Prepoznavanje osi preko EBS-Canbus signala, za prikaz na zaslonu v kabini voznika, tovornjak mora biti prilagojen, ni nameščen (ni overjene tehtnice) Sistem stabilnosti vozila "RDKS" sistem za nadzor tlaka v pnevmatikah po ECE R 141, prikaz na zaslonu v vlečnem vozilu, preko EBS, ni nameščen v tovornjaku (pogoj je izpolnjen v osnovnih pnevmatikah) Kolesa in pnevmatike 235 / 75 R 17,5" Pnevmatike po izbiri proizvajalca Jekleni platišči v dvojni postavitvi, tovarniško srebrna barva Elektrika 24V, večkomorni žarometi, bočna rumena LED osvetlitev Bočna rumena LED osvetlitev povezana s smerniki "utripajoče stranske luči" 2 bele pozicijske luči spredaj 2 belo/rdeči označevalni luči zadaj 2x 7-polna nezamenljiva vtikača spredaj, s povezovalnim kablom 1 LED opozorilna luč z nosilcem, vklop preko pozicijske luči (svetilka snemljiva) 2 para opozorilnih tabel, dvojno LED osvetljene, izvlečljive do 3.000mm Tla Sprednji del jeklena tla nato cca. 70 mm mehkih lesenih desk, na območju koles jekleni/ribasta plošča Zadnja poševnina s 70 mm mehkim lesom Nizkopodna površina z zadnjo poševnino 8.200 mm Nakladalne rampe Jeklene rampe dolžine 3.000 mm, širine 750 mm, premakljive bočno (nadaljevanje spodaj)

Stanje: rabljeno, številka stroja/vozila: WFDFLT33901007921, lastna masa: 9.000 kg, največja dovoljena obremenitev: 26.000 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2018, naslednji pregled (TÜV): 02/2027, dolžina tovornega prostora: 15.150 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 15.350 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", barva: črn, Attention, the images shown are archive photos! The vehicle may currently be in use! Weights and Dimensions: Permissible/Technical Gross Weight: 35,000 / 39,000 kg Permissible/Technical Payload approx.: 26,000 / 30,000 kg Permissible/Technical Axle Load: 24,000 / 27,000 kg Permissible/Technical Kingpin Load: 11,000 / 12,000 kg Unladen Weight approx.: 9,000 kg +/- build tolerance Overall length approx.: 13,850 + 1,500 mm Overall width max.: 2,550 mm Overall height approx.: 3,200 mm Internal length approx.: 13,650 + 1,500 mm Neck length approx.: 4,050 mm Low bed length approx.: 9,600 + 1,500 mm Internal width approx.: 2,480 mm Loading height (low bed) approx.: 900 mm Fifth wheel height approx.: 1,150 mm Kingpin mounting dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis | Fifth-Wheel Platform Haulage Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin Lashing rings recessed into outer frame, each rated at 2.5 t 24 t, 2-speed landing gear, single-sided operation, with straight lower section, no lateral compensation Wheel chocks with holder Side underrun protection, aluminium Rear underrun protection, steel Quarter-shell mudguards in front of 1st axle and behind each axle With anti-spray mudflaps behind each axle Rear collision guard Plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm Document box, front bulkhead mounted Telescoping Central tube frame made of cleanly welded, interlocking telescopic frame sections. Extendable by max. 1,500 mm and lockable after approx. 1,500 mm, outer frame sections approx. 1,500 mm long for insertion into the outer frame when extended Locking by mechanical pin locking Axles & Suspension SAF drum brake axles Air suspension Brake System 2-line compressed air brake system Spring-loaded parking brake 2 error-proof coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connection cable Note: This trailer may only be towed by tractors that ensure the effectiveness of the ABS! With lift & lower valve Wheels & Tires 235 / 75 R 17.5 Steel twin wheels, factory silver Electrics 24 Volt, multi-chamber rear lights, lateral LED marker lights (yellow) 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin error-proof sockets at the front, without connection cable Kdsdpfxjy Slp Is Aiksp Rotating beacon with holder, controlled via parking light (lamp removable) Floor Non-slip phenolic plywood panels approx. 30 mm thick, for high point load capacity, suitable for forklift axle loads up to max. 7,100 kg Where required in wheel arch areas: steel/chequer plate covering Bulkhead/Front Stakes 25 mm aluminium hollow section, 1,950 mm high, steel front stakes, full height in heavy duty design Certification / Signage With Dekra inspection and appraisal Prepared for single-line license plate holder Warning sign according to ECE - 70 Contour marking with reflective tape according to ECE R 048, lateral white and rear red Attention, the images shown are archive photos! The vehicle may currently be in use!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33903000364, lastna masa: 6.120 kg, največja dovoljena obremenitev: 28.880 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2022, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", barva: srebrn, Attention: The images are archive photos! The vehicle may currently be in use! Weights and Dimensions: Permissible/technical gross weight: 35,000 / 39,000 kg Permissible/technical payload approx.: 28,880 / 32,880 kg Permissible/technical aggregate load: 24,000 / 27,000 kg Permissible/technical fifth wheel load: 11,000 / 12,000 kg Unladen weight (basic version) approx.: 6,120 kg +/- build tolerance Overall length approx.: 13,800 mm Max. overall width: 2,550 mm Overall height approx.: 2,388 mm Gooseneck length approx.: 4,050 mm Low-bed length approx.: 9,600 mm Loading height in low-bed, loaded approx.: 900 mm Kdedpfxey Slhqe Aikjp Internal width approx.: 2,480 mm Fifth wheel height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis semi-trailer for haulage company Fine-grained steel welded construction, fifth wheel plate with replaceable 2" king pin Telescoping at the beginning of the low-bed extendable by approx. 1,500 mm, lockable every 500 mm Slightly sloped new outer frame design with "Load-Lock profile" for securing lashing straps "Patented Load-Lock-Cross" for attaching lashing straps, mounted on the crossmember underneath the outer frame 24 t two-speed landing gear, single-sided operation, with straight lower section, without load equalizer Free landing leg corner dimension or free rear swiveling radius of approx. 1,920 mm Side underrun protection: aluminum Rear underrun protection: steel Quarter shell mudguards 9 pairs of lashing/ stanchion rails recessed across the floor up to the main frame, approx. 100 mm high. With 20 mm round steel bars top and bottom, spacing between bars approx. 60 mm. Bottom with angle plate as closure, half open downwards. For securing and inserting stanchions 80 x 80 mm (3 pairs in gooseneck, 6 pairs in low-bed area) 3 pairs of stake pockets recessed in the outer frame, internal dimension approx. 72 x 42 mm Axles & Suspension: Drum brake axles as per manufacturer’s choice "Laser-measured axles/chassis" for reduced tire and fuel consumption Air suspension Brake system: 2-line compressed air braking system Color-coded piping for easy service Spring-loaded parking brake 2 foolproof coupling heads at the front, without connecting line EBS electronic braking system, EBS socket at front, no connecting cable Note: The trailer must only be towed by tractor units that guarantee the effectiveness of the ABS! With lift and lower valve Vehicle stability system Wheels and Tires: 235/75 R17.5, manufacturer at the buyer’s discretion Steel rims, factory silver Electrics: 24 volt, multi-chamber lights, yellow LED side lighting (recessed inward) 2 white position lights front 2 white/red lane marker lights rear 2 x 7-pin foolproof sockets at the front, no connecting cable 1 additional LED work light at rear, switched via reverse light Floor: Approximately 30 mm thick anti-slip plywood, high point load capacity, suitable for forklift axle loads up to max. 5,600 kg Front wall / front corner stanchions: 25 mm aluminum hollow profile, 1,350 mm high Country of registration / plates: Germany Inspection and certificate in Bosnia 24/7 service hotline Prepared for single-row license plate holder Contour marking with reflective tape in accordance with ECE R 048, white on the sides, red at the rear Warning sign according to ECE 70 Painting: Frame: hot-dip galvanized incl. passivation “15-year guarantee against corrosion perforation” Front corner pillars: hot-dip galvanized Front wa

Stanje: novo, največja dovoljena obremenitev: 25.050 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 950 mm, skupna širina: 2.550 mm, Skupna masa: 35.000 kg / 48.000 kg Lastna masa: 9.950 kg Nosilnost: 25.050 kg / 38.050 kg Skupna dolžina: 21.000 mm Dolžina nakladalne površine: notranja dolžina ca. 13.500 mm / največja dolžina nakladalne površine 21.000 mm Širina: 2.550 mm Višina nakladalne površine: 950 mm Dodatne informacije Novo vozilo iz tekoče proizvodnje, kmalu na voljo Kdsdpfx Ajumha Njikep Teleskopska zadnja podpora 4 zagozde za podlaganje koles z nosilcem 4 para spuščajočih kontejnerskih zapor v dnu za 1x 40 ft. kontejner ali 2x 20 ft. kontejnerja 1 nosilec rezervnega kolesa za 1 rezervno kolo, z garnituro za pritrditev, v košarici 11 parov žepov za stranice v zunanjem okvirju, primerni za FR-vložne stranice 80x50 mm, vgrajeni poravnano z zunanjim okvirjem, z odprtino za pritrditev pasu ali verige 20 kosov natakljivih stranic B=80 / G=50 / D=1500 mm 1 plastična orodjarna 3 para priveznih ušes po 3,5 t, vgrajenih v stranski okvir – v predelu vratu 13 parov zložljivih priveznih obročev po 10.000 daN, prostoviseče obešenih v profilu stranskega okvirja (primerni tudi za prekomerno široko privezovanje) 1 par zložljivih priveznih obročev po 10.000 daN, vgrajenih ob strani na vmesni podpori Zračno vzmetenje z možnostjo dviga in spuščanja 1. os samodejna dvižna os, dodatno prisilno spuščanje, vključno s pripomočkom za speljevanje z gumbom za upravljanje na polpriklopniku, brez upravljanja iz kabine voznika z ventilom za dvig in spust + funkcija samodejne ponastavitve Kolesa in pnevmatike 235/75 R 17,5" jekleni platišči v dvojni izvedbi, tovarniško srebrni 24 V, večkomorni žarometi, stranska rumena LED osvetlitev 2 sprednji beli pozicijski LED luči 2 zadnji LED luči za označevanje sledi (belo/rdeče) 2 x 7-polna in 1 x 15-polna varnostna vtičnica spredaj, brez priključnega kabla 2 dodatna LED delovna žarometa zadaj, vklop preko vzratne luči 1 odstranljiva opozorilna luč na zaščiti proti podrsu 1 x 7-polna vtičnica zadaj 6 stranskih vtičnic: 2x sprednja stena, 2x podporna noga, 2x zadnji konec (levo + desno), 7-polni 2 delovna žarometa, zgoraj vgrajena v sprednjo steno, vključno s stikalom 2 para table za označevanje prekomerne širine, vsaka s po 2 LED pozicijski lučki na tablo, stransko raztegljive do 3.500 mm, table dodatno nastavljive na nakladalno površino (prilagoditev širine brezstopenjsko) Fiksna jeklena sprednja stena, višina 1.200 mm, z robustnimi jeklenimi vogalnimi stebri brez poševnine v kotih, stransko ravna izvedba 2 luknji za privez zgoraj noter in zunaj v zgornjih kotih sprednje stene Prednji okvir vroče cinkan + zunanji okvir na vidnem delu končna lakirana v RAL 3002 karminsko rdeči barvi Zadnji okvir vroče cinkan + zunanji okvir na vidnem delu končna lakirana v RAL 3002 karminsko rdeči barvi Sprednja stena RAL 3002 karminsko rdeča