Fliegl Tehnologija Gnojevke nakup rabljenega (299)

Stanje: novo, številka stroja/vozila: ee3256d63dd23b3ad1bdf9ab0, lastna masa: 10.280 kg, največja dovoljena obremenitev: 13.720 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with robust ball bearing slewing ring Foldable rear support legs Itjdei Ri I Nopfx Ab Hsd 2 wheel chocks with holders Aluminum side underrun protection Full-width rear mud flaps Quarter shell fenders in front of the 1st axle Excavator arm trough above the rear axles starting to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing holes rated at 5 t each in the excavator arm trough, positioned laterally on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear taper 1 storage box recessed into the gooseneck on the floor with lid, W=720 mm/ L=520 mm / D=170 mm 1st pair of wheel recesses after the gooseneck, recessed in the low-bed deck area, sloped for entry, length at bottom approx. 1600 mm, approx. 400 mm deep. Note! Main frame section 400 mm higher than wheel recess. 2nd pair of wheel recesses between the axles, recessed in the low-bed deck area, sloped for entry, length at bottom approx. 600 mm, approx. 300 mm deep. Note! Main frame section 300 mm higher than wheel recess. Removable wheel recess covers from the main frame, with wooden inserts. Distance from main frame longitudinal member to outside member approx. 1280 mm (wheel recess area) Extensions extendable to 3,000 mm, foldable at the wheel recess extensions (extensions not in the rear taper nor at the bottom of the wheel recesses) (The track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for timber planks centrally on load area or underneath depending on technical feasibility 70 mm timber planks for extension to 3,000 mm Low-bed lashing points 1 pair of ring lashing points recessed in the gooseneck, each rated at 5 t 8 pairs of lashing mushrooms recessed in the top and side outer frame, each rated at 10 t 2 x at the front on the gooseneck 6 x in the low-bed – first lashing point 250 mm from the front, last maximum 250 mm from the rear, distance between lashing points not greater than 1100 mm 5 pairs of ring lashing points recessed in the outer frame, each rated at 5 t (can be converted to stake pockets) Drawbar Assembly for Turntable Trailer Drawbar with tested 50 mm towing eye, towing eye inclined at 8° Axles + Suspension SAF drum brake axles Axles/chassis laser-measured to reduce tire wear and fuel consumption Air suspension with lift & lower valve, separately operable at front and rear Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line pneumatic braking system Spring-loaded parking brake Trailer info center, displays vehicle data (e.g., axle load—not a calibrated scale) and odometer Axle load detection via EBS-Canbus signal, for display in the cab (truck must be pre-equipped, not installed in truck, not a calibrated scale) Vehicle Stability System Duomatic coupling at the front with connecting line to the truck tractor EBS, electronic braking system with EBS socket at the front, with connecting cable Note: The trailer may only be towed by vehicles that ensure proper ABS function! Electrics 24 volts, multi-chamber LED lights with resistor, side marker yellow LED lights, LED license plate lights (Note: Certain towing vehicles may show diagnostic errors despite systems working correctly) 2 white front position lights in LED 2 white/red lane marker lights at the rear in LED Additional LED w

Stanje: novo, številka stroja/vozila: 2b58968e34fac93b429a256e9, lastna masa: 5 kg, največja dovoljena obremenitev: 12 kg, skupna masa: 18 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Isdpfx Aei Ri Nxjb Hotd Chassis Low-bed trailer Steel welded construction Turntable with robust ball-bearing slewing ring, storage box integrated into turntable front section Rear folding support Wheel chocks with holder Aluminum side underrun protection Full-width rear mud flaps Quarter-shell fenders in front of 1st axle Spare wheel holder for 1 spare wheel, including wheel mounting kit Spare wheel, same brand and specification as standard tires, steel rim Plastic tool box with shelf, w=620/h=360/d=440 mm, lockable with padlock (padlock not included) Lashing rings low-loader 3 pairs of lashing points (10 t each) integrated in front floor, 6 pairs of mushroom lashing points (10 t each) fitted on and into the outer frame at the top and sides: 1x at gooseneck, remaining distributed in between (distance max. 1200 mm), 1x on rear slope 5 pairs of recessed ring lashing points in the outer frame (5 t each, convertible to stake pockets) Drawbar equipment trailer turntable Drawbar with certified 40 mm towing eye Axles and suspension SAF drum brake axles Axle/chassis laser alignment for reduced tire wear and improved fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bearings Wheels and tires 235/75 R17.5 Manufacturer's choice Steel twin wheels, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS plug at the front, including connection cable, voltage converter for 12/24 Volt operation Note: Tractor/trailer requires a 7-pin 12 Volt socket! (Electric system with voltage converter required!) Attention: Trailer may only be towed by vehicles that ensure proper ABS functionality! Electrics 24 Volt, multi-chamber lights, yellow LED side lighting 2 white/red width marker lights at rear 2 white position lights at front Additional LED work light at rear, controlled via reversing light 2x 7-pin non-interchangeable plugs at front with connecting cable 1x 7-pin agricultural plug, voltage converter 12/24 Volt (for electrics only, not for ABS/EBS) Floor Steel floor in front section, followed by 70 mm softwood flooring, steel/chequered plate in wheel arch area Rear slope section with 70 mm softwood flooring Low-bed area including rear slope 8,200 mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, timber-planked, with spring assist Operating notes Special permit required for 10,000 kg axle load; permit must be obtained separately in each federal state; no guarantee from authorities for 20 t GVW. Customer assumes risk. Country of registration / plates Country: Germany With Dekra inspection and certificate (according to §13 EC - FGV) 24/7-service hotline Prepared for double-line number plate holder Outline marking with reflective tape per ECE R 048, white side and red rear Paintwork Frame DB 7350 Nova grey 10-year corrosion warranty Drawbar galvanized or black, manufacturer's choice Ramps hot-dip galvanized Attention: Archive images!

Stanje: rabljeno, številka stroja/vozila: 41b5b53ab0b527fda1f0f26fe, lastna masa: 6.500 kg, največja dovoljena obremenitev: 28.500 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2020, velikost pnevmatike: 445/45 r19,5, Further details: Please note: The images are archive photos; the vehicle may still be in use! Chassis Semi-Trailer, Forwarder specification: - Fine-grained steel welded construction, with preload for light pretensioning in the neck area, fifth wheel plate with interchangeable 2" kingpin - PRO SLIDE: Additional sliding plate at the front for protection during coupling - Outer frame slightly angled with load-lock profile for lashing strap hooks Note: To attach straps in combination with drop sides, the drop sides must be opened! - 24-ton, 2-speed landing gear, single-sided operation, with semi-circular base and straight mounting plate, with lift compensation Note: Free corner dimension for landing leg, or free swinging radius to the rear approx. 1930 mm - 1 pair of gearbox support legs at the rear, with straight base and single-sided operation on FR right - Extending ladder at the rear - Side door holders - Wheel chocks with holder - Side underrun protection in aluminium - Rear underrun protection in galvanized steel - Quarter shell mudguards in front of the 1st axle and behind each axle - With anti-spray mud flaps behind each axle - Heavy Blocker rear end crash protection plus roller bump stops on the sides - Heavy-duty pallet stops, bolted on both sides, approx. 15-20 mm high, with lashing points every 200 mm; loading height reduced by approx. 15-20 mm - Plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (padlock not included) - Storage compartment for 16 insert slats, one side at FR-left, below the loading area Axles & Suspension: - BPW disc brake axles with 370 mm disc diameter - Axles/chassis laser alignment: reduces tyre wear and fuel consumption - Air suspension - Rear loading height, raised: approx. 1200 mm (air suspension on truck lowered to approx. 910 mm coupling height) - Without lift axle Braking system: Itodsqhiyxspfx Ab Hed - 2-line compressed air braking system - Colour-coded line routing for ease of service - Spring-actuated parking brake - Duomatic connection at front, without connecting line - Wabco-E EBS: electronic braking system with EBS socket at the front, without connecting cable Warning: The trailer may only be towed by towing vehicles that ensure the functionality of ABS! - With lift & lower valve plus auto-reset function - Vehicle stability control system - Ramp start assist, Wabco TailGUARD with 3 ultrasonic sensors at rear Electrics: - 24 Volt, multi-chamber lights, lateral yellow LED lighting - 2 white position lights at front - 2 white/red lane marker lights at rear - 2 x 7-pin and 1 x 15-pin mistake-proof sockets at front, without connecting cables - Reversing camera system with colour flat-screen monitor, wireless connection to screen; screen with suction holder, powered via 24 V vehicle socket Floor: - Anti-slip phenolic plywood panels, approx. 30 mm thick, on longitudinal cross members for high point loading capacity for forklift axle loads up to max. 7,100 kg - Heavy-duty floor at rear for approx. 1,800 mm length - Rear area with steel/chequer plate covering for approx. 300 mm (slightly protruding) Front bulkhead / Corner posts: - 2,580 mm high, steel corner posts in high-volume design, release mechanism for side curtain at bulkhead - Crash Blocker: interior lower area approx. 140 mm high with steel impact protection Centre stanchions: - 3 pairs of sliding stanchions, movable along the entire length, with 4 fixed pockets and long bottom pocket - 3 pairs of stanchion positions I

Stanje: rabljeno, številka stroja/vozila: 28be789c7675b811b702c6cb3, lastna masa: 6.000 kg, največja dovoljena obremenitev: 20.000 kg, skupna masa: 26.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/2018, velikost pnevmatike: 205 / 65 r 17,5, Further Information Fine-grained steel welded construction, fifth wheel plate with replaceable 2-inch kingpin. Reinforced pickup point for gallows-mount, equipped with sturdy wear plates all around; channel profile from flat steel beneath the outer frame. Outer frame slightly tapered with load-lock profile for securing lashing straps. Note: To attach straps in combination with sidewalls, the sidewalls must be open! Itodomp Ug Depfx Ab Hed 24-ton two-speed landing gear, one-sided operation, with straight lower section, without compensating slide. Wheel chocks with holders, aluminum side underrun protection, set inwards as far as technically possible; steel rear underrun protection for maximum ground clearance; quarter-shell fenders in front of and behind each axle; hook-in rail for aluminum ramps at the rear; plastic toolbox with shelf insert (width=620 mm/height=360 mm/depth=440 mm), lockable with padlock (padlock not included). SAF drum brake axles, with axle stops; wheelbase 1,600 mm; air suspension with raise/lower valve. 205/65 R17.5, twin steel rims, factory silver finish. 2-line compressed air brake system, spring-loaded parking brake, two non-interchangeable coupling heads at the front, without connecting line; EBS (Electronic Braking System) with EBS socket at the front, no connection cable. Warning: The trailer must only be towed by towing vehicles that support proper ABS function! 24 volt, multi-chamber lights, integrated yellow side LED lighting in outer frame profile, set approx. 25 mm inwards, 10 per side. 2 white position lights at the front, protected; 2 white/red marker lights at the rear; additional LED work light at the rear, connected to reversing light. Two 7-pin and one 15-pin non-interchangeable sockets at the front, no connecting cables. Phenolic plywood flooring approx. 30 mm thick for high point load capacity, suitable for forklift axle loads up to max. 5,600 kg. Special flooring installation: testing of new profiles, no screws. In wheel arch area: steel/chequer plate overlay. Front bulkhead/corner posts made from 25 mm aluminum hollow profile, approx. 800 mm high; steel corner posts, heavy-duty version, with windows on both sides. Country of registration: Germany, with Dekra inspection and certificate (according to §13 EC – FGV), 24/7 service hotline, prepared for single-line license plate holder, contour marking with reflective tape in accordance with ECE R048, white on the sides and red at the rear.

Stanje: rabljeno, številka stroja/vozila: 9c9dadcd470a127e08914041a, lastna masa: 2.600 kg, največja dovoljena obremenitev: 10.800 kg, skupna masa: 13.400 kg, konfiguracija osi: 2 osi, prva registracija: 05/2017, velikost pnevmatike: 285/70 r19,5, Leto izdelave: 2017, Further Information Fine-grain steel welded construction, fifth wheel coupling, manufacturer of our choice for 2-inch king pin, telescopic landing legs, wheel chocks with holder, steel underrun protection, half-shell mudguards, removable top sections Drawbar with certified 50 mm towing eye, lower coupler drawbar BPW disc brake axles, air suspension with raise and lower valve, mechanical dolly steering system (required in Germany to comply with BO-Kreis regulations) 2-line compressed air braking system, spring-loaded parking brake, Duomatic coupling head at the front with connector lines to the motor vehicle, Duomatic coupling head to the semi-trailer including spiral connection, EBS, electronic braking system with EBS plug at the front, with connection cable EBS connection cable to the semi-trailer, with CAN router, axle load detection for trucks via EBS, without installation on truck Itjdpfx Aoi Rivtob Hod Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! 24 Volt, multi-chamber tail lights, yellow LED side lighting, 2 white position lights at the front, 2 white/red lane-keeping lights at the rear, 1 x 15-pin connector at the front with connection cable to the truck, 1 x 15-pin socket with spiral connector to the semi-trailer, cable for reversing camera system with socket With Dekra inspection, prepared for single-line license plate holder, contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear, warning sign according to ECE - 70 Saddle height approx.: 960 mm

Stanje: novo, številka stroja/vozila: 56c59c8aba35227ffb44c9f75, lastna masa: 11.350 kg, največja dovoljena obremenitev: 26.650 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Jumbo semi-trailer chassis Steel welded construction with closely spaced cross members, reinforced design, low-bed outer frame profile, suitable for the transport of construction machinery up to 32,000 kg and with a maximum machine width of up to 2,550 mm. Fifth wheel plate with interchangeable 2” king pin. Rear taper approx. 1,200 mm and 7°. Ramp roller closed at the top with steel/chequer plate. In the low-bed area: Omega rail mounted laterally below the outer frame for curtain mounting and as a spacer to the lashing mushrooms, not in the wheel area. For hydraulic lift table: additional fixed lightweight outer frame with Omega profile; lift table can be raised with the tarpaulin closed! 24 t 2-speed landing gear, single-side operation, with semi-circular base and straight mounting plate, load compensation, free rear swing radius approx. 1,950 mm. Foldable rear supports 2 wheel chocks with holders Aluminium side underrun protection Quarter-round mudguards in front of and behind each axle Anti-spray flaps behind each axle Steel rear underrun protection Full-width rear spray flap 4 stainless steel toolboxes, w=800/h=350/t=350 mm, polished lockable doors, 2x on front left and 2x on front right before the first axle Hydraulic lift table behind gooseneck, approx. 3,000 mm long, hydraulically raisable to drive over the gooseneck, with mechanical locking in raised position (cylinders angled for ground clearance, Fliegl standard). Operation from front right + additional remote control operation (same device as ramp control). Lift table operable with closed tarpaulin! Curtain mounting in the lift table area on a separate lightweight Omega-profile outer frame; lift table operable with closed tarpaulin. Lashing mushrooms usable even when table is lowered! Itsdsi Riw Aopfx Ab Hjd Lashing eyes Gooseneck: 4 pairs of 5 t lashing eyes recessed into outer frame 2 pairs of lashing mushrooms recessed at the top and on the side of the outer frame Low bed 8 pairs of lashing mushrooms (top and side of outer frame), each 10 t 9 pairs of 5 t lashing eyes recessed into outer frame Axles & suspension SAF drum brake axles Last axle self-steering, with automatic reverse lock via reversing light, additional manual locking on vehicle Air suspension with raise/lower valve and auto-reset function Raise/lower function with quick exhaust 1st axle automatic lift axle, including forced lowering and traction aid, activated by 3x braking (traction aid works up to 30% axle overload and max 25 km/h) Axle lift below recommended driving height; therefore, no warranty against tyre damage Wheels and tyres 235/75 R17.5 From leading manufacturers Twin steel rims, factory silver Braking system 2-line compressed air brake system Spring-type parking brake 2 fail-safe coupling heads (front), no connecting line EBS, Electronic Braking System with front EBS socket, no connection cable Note: Trailer may only be towed by tractors that ensure ABS is working! Axle load detection via EBS in truck, without truck installation (not a certified scale) Electrics 24 volt, multi-chamber rear lamps, yellow LED side marker lighting 2 white LED front position lights 2 white/red lane assist rear lights 1 rotating beacon with bracket, switchable via parking light (detachable light) 2 pairs of double LED warning boards, extendable up to 3,000 mm 2 x 7-pin and 1 x 15-pin fail-safe sockets at front, without connecting cable

Stanje: novo, številka stroja/vozila: ebf3f771e96394cd89e56bbb7, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Chassis Central-axle trailer Fine-grain steel welded construction 6 pairs of lashing eyes screwed into the floor/external frame, each rated at 5 tons 2 additional pairs of lashing eyes screwed into the floor, each rated at 5 tons, in the corners Gear support leg at the front Foldable rear support 2 wheel chocks with holder Steel underrun protection Full-width rear mud flaps Quarter-shell fenders 1 plastic toolbox with shelf, dimensions 620mm (w) / 360mm (h) / 440mm (d), lockable with a padlock (padlock not included) Central-axle trailer towing device Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles and suspension Drum brake axles, manufacturer’s choice Axle/chassis laser alignment to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel/rubber bushings and mechanical axle load equalization (rocker compensation) Wheels and tires Itedpfx Absi Rixrj Hod 235/75 R 17.5 Manufacturer’s choice Steel rims, factory silver Brake system 2-line compressed air brake system Hand spindle parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS plug at the front, with connection cable Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connection cable Floor Steel/Tread plate floor for high point load capacity Note: Minor floor waviness possible due to welding distortions! Platform length approx. 5,200 mm Rear slope approx. 900 mm Front wall / corner posts 25 mm aluminum hollow profile, height 400 mm Sideboards 25 mm aluminum hollow profile, height 400 mm, foldable and removable Rear wall / rear corner posts 1 pair of steel posts attached to the frame with bracket for ramp locking, entry width approx. 2,430 mm Loading ramps 2 steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with handle on the ramps Covered with 3 toothed steel rails With gas pressure springs for single-person operation Country of registration / plates Country of registration: Germany 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame hot-dip galvanized incl. passivation 15-year warranty against rust-through Front wall: aluminum Sideboards: anodized aluminum Loading ramps: hot-dip galvanized Attention! These are archive images.

Stanje: rabljeno, številka stroja/vozila: 4b9217583a30f28a6bc1ce196, lastna masa: 2.600 kg, največja dovoljena obremenitev: 10.800 kg, skupna masa: 13.400 kg, konfiguracija osi: 2 osi, prva registracija: 01/2014, velikost pnevmatike: 285/70 r19,5, Leto izdelave: 2013, Further information High-tensile fine-grained steel welded construction, fifth wheel coupling (manufacturer at our discretion) for 2" kingpin, telescopic landing gear, wheel chocks with holder, steel underrun protection, half-shell mudguards. Drawbar with certified 50 mm towing eye, mechanically length-adjustable lower coupling drawbar. BPW disc brake axles, air suspension with lift and lower valve, electronic dolly steering system, transmitter via contact in the towing eye (mandatory in Germany to comply with BO-Kreis regulations, or the trailer must be steered). 2-line compressed air brake system, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front with connection lines to the tractor unit, 2 non-interchangeable coupling heads to the semi-trailer. Itodpfxsi Riyds Ab Hod EBS, electronic braking system with EBS socket at the front, with connecting cable, EBS connecting cable to the semi-trailer, axle load detection for truck via EBS (without truck installation). 24 Volt, multi-chamber tail lamps, side yellow LED lighting, 2 white position lights at the front, 2 white/red lane marker lights at the rear, 1 x 15-pin plug at the front. Country of registration: Germany, with DEKRA inspection, prepared for single-line license plate holder, contour marking with reflective strips according to ECE R 048 (white on the side, red at the rear), warning sign according to ECE - 70. Saddle height approx.: 960 mm

Stanje: novo, številka stroja/vozila: c3dd8c834afed73501f8074af, lastna masa: 3 kg, največja dovoljena obremenitev: 20 kg, skupna masa: 24 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/55 r22,5, Further Information Chassis Swap Turntable Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of guide rollers removable, front and rear 4 container locks with robust outriggers on 20-foot base for swap bodies 7.15 and 7.45 Turntable with heavy-duty ball bearing slewing ring 2 wheel chocks with holder Side underrun protection in aluminium Rear underrun protection in steel Front and rear half-shell mudguards 2 stainless steel toolboxes, W=600/H=400/D=500 mm, with polished lockable doors 1 pair of warning signs double LED illuminated, extendable to 3,000 mm at the rear, rear only 1 prep socket for customer-side retrofitting of warning signs at front Turntable trailer coupling Drawbar with tested 40 mm towing eye Drawbar mechanically adjustable in length, 6 positions x 100 mm, and lockable (drawbar length approx. 1900–2500 mm) Drawbar height adjustment via spring Axles & Suspension BPW disc brake axles with 430 mm disc diameter Itjdsi Riylepfx Ab Hod Axles/chassis laser aligned - reduces tyre wear and fuel consumption Air suspension with lift & lower valve Wheels and Tyres 385/55 R22.5 Brand at manufacturer's discretion Steel rims, factory silver Brake System 2-line compressed-air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with connecting lines to tractor unit, EBS, Electronic Braking System with EBS socket at front, including connecting cable Note: The trailer may only be towed by tractor units which ensure correct ABS functionality! Electrics 24 Volt, multi-chamber rear lights, yellow LED side markers 2 white position lights at front 2 white/red lane marker lights at rear Removable beacon 1 additional LED work light at the rear, switched via reverse light 2 LED work lights on both sides (1x left, 1x right), switched via reverse light 1 x 15-pin connector at front, with connecting cable Country of Registration / Plates Country of registration: Germany With Dekra inspection and report (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective tape acc. ECE R 048, white on the sides and red at the rear Paintwork Chassis hot-dip galvanized incl. passivation, 15 years anti-corrosion warranty Drawbar black KTL-coated

Stanje: novo, številka stroja/vozila: e763c8c2bb3370bd2342236a4, lastna masa: 3 kg, največja dovoljena obremenitev: 8 kg, skupna masa: 11 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Central Axle Tipper Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm spherical tipping bearings Gearbox support leg at the front 2 wheel chocks with holders Steel underride protection Lockable storage compartment for loading ramps beneath the loading area Central axle trailer drawbar system Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles & Suspension Euro axles (manufacturer’s choice), with tapered roller bearings and S-cam brakes Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization (rocker balance) Wheels and Tyres 235 / 75 R 17.5 Manufacturer’s choice Factory silver steel rims Braking System 2-line air brake system with color-coded line routing for easy service. Hand spindle parking brake Integral air reservoir Without ABS but with mechanical automatic load-dependent braking (ALB), max. 60 km/h registration 2 swap-proof coupling heads at the front, with connecting lines to the towing vehicle Electrics 12 Volt, multi-chamber lights, no side yellow LED lighting, side reflectors 2 white position lights at the front 2 white/red lane marker lights at the rear 1 x 7-pin 12 Volt plug at the front, with connection cable extended by approx. 60 cm Hydraulics Three-way tipper system, hydraulic multi-piston press with lift limitation and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If required, throttle to be retrofitted on truck. Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Operated hydraulically via truck PTO Tipping body Robust tipping body with 4 mm steel plate floor, steel side wall construction, continuous side walls, fold-down and pendulum-mounted with central locking at the bottom. Detachable corner posts at the rear. Tailgate fold-down and pendulum mounted, with central locking at the bottom. Bed length approx. 4,500 mm, side walls with 5 bottom hinges. Bed width 2,420 mm 5 pairs of lashing eyes in the floor, each rated at 5 t Operational notes Itsdpfxei Rizbe Ab Hjd The specified gross weight is technically achievable; depending on the cargo, the gross weight may not be attainable when observing permissible axle/support/kingpin loads. (Poor driving or trailing behavior possible due to incorrect load distribution) Country of Registration / Plates Country of Registration: Germany With Dekra inspection and certificate, for max. 60 km/h registration, towing vehicle LoF, (country of registration Switzerland max. 40 km/h possible) Prepared for single-line number plate holder Without contour marking / reflective tape as per ECE R 048, Paintwork Frame hot-dip galvanized including passivation, 15 years warranty against corrosion Side/tipper body RAL 3002 carmine red Note! If body is galvanized, it will not be painted! Note! Inside of body is only primed! Wide tyres available at extra charge: 355 / 60 R 18, loading height approx. 980 mm Attention: Archive pictures!

Stanje: novo, številka stroja/vozila: 8fbda13da8c595f64678f0f82, lastna masa: 2.100 kg, največja dovoljena obremenitev: 11.300 kg, skupna masa: 13.400 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 275/70 r 22,5, Further information Chassis Central axle trailer Fine-grain steel welded construction Fifth wheel coupling, manufacturer of our choice, designed for 2 kingpins. With ball bearing turntable, maximum lock angle 20°. Support at the drawbar and at the front of the dolly Wheel chocks with holder Steel underrun protection Half shell mudguards Towing device for central axle trailer CLG undercoupler drawbar with certified 50 mm towing eyes for the dolly and for the truck, including drawbar locking device on the truck! Axles & Suspension BPW disc brake axles Air suspension For Swap Train standard version: lowered fifth wheel height approx. 1100 mm, raised fifth wheel height approx. 1280 mm, coupling height approx. 1140 mm. Brake system 2-line compressed air brake system. Color-coded piping for easy servicing. Spring parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the truck, 2 non-interchangeable coupling heads with coil-flex connectors to the semitrailer EBS, electronic braking system with EBS connector at the front, with connection cable, EBS coil-flex connectors to the trailer Attention: The trailer may only be towed by vehicles that can guarantee the effectiveness of the ABS! With lift & lower (raising and lowering), ECAS, via truck control, Ecas CAN 2 bus required in the truck without Ecas CAN 2 bus in the truck: additional in-cab operating control required (not included): Wiring pre-installed with a distribution box. Operation for 15-pin socket: pin 11 and 15; for 2 x 7-pin sockets: pin 7 and 5 Note! This version must be technically inspected in conjunction with the trailer; it is likely that the dolly and trailer can only be raised and lowered together; if this is not technically possible, operation is via WABCO eTASC with hold function in lowered position + auto-reset (no power from the truck required). Additional in-vehicle operation via WABCO eTASC + hold function in lowered position + auto-reset (no power from the truck required) Vehicle stability system ECAS only possible in conjunction with WABCO EBS. Axle load detection via EBS CAN bus signal, for display on the cab dashboard; truck must be appropriately equipped, no truck installation (not a certified scale) Brake release function from the truck (via button) on pin 14 and additionally by button on the vehicle next to the raise & lower valve, to release the brake when coupled, EBS power supply must be ensured! With CAN router Wheels and tires 275/70 R 22.5, make as chosen by the manufacturer Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, LED side marker lights (yellow) LED side marker lights (yellow), coupled with turn signal, flashing side markers 2 white LED position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connecting cables 2 x 7-pin non-interchangeable plugs with coil-flex connectors to the trailer Cable & plug/or socket for rear view camera system, depending on vehicle type Operating notes Note! Observe long truck regulations! Please note the currently approved road network! Tractor unit must go to the Triptis plant for approx. 1 week for drawbar adaptation! Please comply with the CLG recommendation as per enclosure. Mandatory before order acceptance: Submission of all relevant dimensions as per Fliegl CLG form (see attachment). Itsdpfx Asi Rizxob Hed The coupling height of the planned trailer must be known. Fliegl Fahrzeugbau accepts no liability for fau

Stanje: novo, številka stroja/vozila: 408ba9a39bbb8087056d6e563, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Itedei Ri Daspfx Ab Hod Side underrun protection made of aluminium Full-width rear mudflap Half-shell fenders on 1st and 2nd axle with anti-spray mudflaps behind each axle; anti-spray mudflaps in front of and behind 3rd and 4th axle Excavator arm recess over the rear axles, starting to the rear, approx. 1800 mm long, approx. 650 mm wide, and approx. 150 mm deep, 2 pairs of lashing holes each rated 5 t located laterally in the excavator arm recess in the main chassis, approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox with shelf, w=620/h=360/d=440 mm, lockable with a padlock (Padlock not included) 1 storage box let into the gooseneck in the floor with lid, w=720 mm/ l=520 mm / d=170 mm Extendable width to 3,000 mm (not at the rear bevel) (the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) 70 mm timber planks for widening to 3,000 mm Storage compartment for timber planks under the loading platform Lashing rings low-loader (40 lashing possibilities) 1 pair of lashing rings on gooseneck, each 5 t 9 pairs of lashing mushrooms recessed into the outer frame, top and side, each rated 10 t 2 x in the front on the gooseneck 7 x in the low-bed 6 pairs of lashing holes in the outer frame of the low-bed, each rated 5 t (for lashing strap hooks) 3 additional pairs of folding lashing rings, each rated 10 t 1 x inside beside the main frame at the beginning of the low-bed 1 x on the gooseneck (protruding) 1 x recessed into the floor behind the last axle Drawbar coupling for turntable trailer Drawbar with certified 50 mm towing eye, towing eye inclined at 8°, D-value at least 160 kN Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (rocker equalisation) Wheels and Tyres 235 / 75 R 17.5 manufacturer’s choice Steel rims, twin mounting, factory silver Brake System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, including connection lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connection cable Electrics 24 volt, multi-chamber lamps, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connecting cable 1 LED beacon with holder, operated via parking light (beacon removable) 2 pairs of warning boards, double LED illuminated and extendable to 3,000 mm Flooring Gooseneck at front with steel/chequer plate floor Then with 70 mm softwood floor, in wheel arch area steel/chequer plate covering Rear bevel with 70 mm softwood floor Loading Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber decked Hydraulically operated via tractor PTO with restrictor, control located on the left side at the front Hydraulic connection with SVK connector NW 10/3, incl. connecting hose Registration Country/Plates Registration country: Germany 24/7 Service Hotline Prepared for two-line number plate holder Contour marking with reflective strips according to ECE R 048, side white and rear red Warning plate according to ECE – 70 Paintwork Chassis hot-dip galvanized including passivation, 15-year warranty again

Stanje: rabljeno, številka stroja/vozila: 3ca51192c90a3f38a59d77748, lastna masa: 2.872 kg, največja dovoljena obremenitev: 15.128 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 11/2019, velikost pnevmatike: 385/65 r22,5, Leto izdelave: 2019, Further information: Fine-grain steel welded construction, front stop, longitudinally adjustable and foldable, pair of guide rollers removable, front and rear, Swap Guard – swap body guide, located before and after each container lock, 4 container locks with sturdy outriggers based on 20-foot positions for swap bodies 7.15 m and 7.45 m, turntable with robust ball-bearing slewing ring, wheel chocks with holders, aluminium side underrun protection, side underrun protection set inward for optimal clearance to the swap body supports, steel rear underrun protection, rear underrun protection shortened for optimal clearance to the swap body supports, lighting system installed protected, quarter mudguards at the front and half mudguards at the rear, without impact protection, spare wheel holder in basket design, plastic toolbox. Iedei Ri Dzepfx Ab Hetd Drawbar (L = 2,200 mm) with tested 40 mm towing eye, drawbar length, drawbar height adjustment via spring. SAF disc brake axles with 430 mm disc diameter, axles/chassis laser measured to reduce tyre wear and fuel consumption, air suspension. 2-line compressed air brake system, colour-coded piping for easy servicing, air supply 208 litres, spring-actuated parking brake, 2 interchangeable coupling heads at the front, with connection lines to the truck, EBS, electronic braking system with EBS plug at the front, with connection cable. (Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of ABS!) with lift/lower valve, hold function in both lift and lower positions, brake release function via button on vehicle beside the H & S valve, to release the brake in coupled condition, EBS power supply must be ensured! 24 Volt, multi-chamber lights, lateral yellow LED lighting, 2 white position lights at front, 2 white/red clearance lights at rear, 1 x 15-pin plug at front with connection cable, extra LED work light at the rear operated via reverse gear, front-centre mounted rearward-facing LED work light operated via reverse gear. Country of registration: Germany, with Dekra inspection and certificate (according to §13 EG-FGV), prepared for single-line number plate holder, warning sign according to ECE-70, ADR warning sign at the rear, foldable, contour marking with reflective tape according to ECE R 048, white on the side and red at the rear.

Stanje: novo, številka stroja/vozila: 71cc13750cef13b72f7a55abe, lastna masa: 5.500 kg, največja dovoljena obremenitev: 29.500 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r22,5², Further Information Chassis semi-trailer tipper Fine-grained steel welded construction, lightweight design, fifth wheel plate with interchangeable 2-inch kingpin Patented curved front panel 24 t, 2-speed landing gear, single-sided operation, straight lower section, without sliding compensation 2 wheel chocks with holders Folding underride guard Half-shell mudguards Integrated mudguard brackets, stone-resistant surface With anti-spray mudflaps only on the last axle 1 tarpaulin bar with holder 2 tow hooks at the rear Axles & Suspension SAF disc brake axles with 430 mm disc diameter Laser-calibrated axles/chassis for reduced tire wear and fuel consumption Axles in off-road configuration Air suspension 1st axle automatic lift axle, including forced lowering and drive-off aid, activation via 3x braking (drive-off aid functions up to 30% axle overload and a max. speed of 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Brake System 2-line compressed air brake system with color-coded lines for easy service Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system, with EBS socket at the front, without connecting cable Note: This trailer may only be towed by towing vehicles that ensure the functionality of the ABS! With lift and lower valve Vehicle stability control system Wheels and Tires Ijdpfx Aoi Ri Efeb Hstd 385/65 R22.5, brand at manufacturer’s discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, lateral yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connecting cable Hydraulics Low pressure cylinder max. 170 bar, smallest stage hard chrome plated, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Control hydraulic via truck auxiliary drive Body Aluminum box-type body made of high-grade, abrasion-resistant material, front wall 5 mm thick, outer side walls from 30 mm hollow-chamber profiles, clean welded, with bulk material-repellent top rail profile. Internal access at the front wall (not compatible with Cramaro system). External shovel and broom holder on the front wall. Greenline—conical and aerodynamic body shape Membrane rear wall Rear wall pendulum mounted with double-link hinge and divided 2-leaf door (1⁄2 to 1⁄2), upper swing bracket, each door with a grain slider Rear wall with rubber seal Note! Heat-resistant to max. 170°C! Floor completely 6 mm thick Standing platform with ladder, connector plate for air/electricity and brake with large clearance for optimal usability Roll tarp stored on right side (FR-right), central locking on left side (FR-left) Operating Instructions For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent corrosion. The specified total weight is technically possible; depending on the load, the permissible axle, support, and fifth wheel loads may not be reached (poor driving and trailing performance may result from incorrect load distribution) Registration/Country Marks Germany Test approval per EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips as per ECE R 048, white on sides and red at rear Paintwork Chassis DB 7350 Novagr

Stanje: novo, številka stroja/vozila: 207ad28f83705ed0d38a4f174, lastna masa: 3 kg, največja dovoljena obremenitev: 11 kg, skupna masa: 14 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235/75 r17,5, Further information Chassis Change Central-Axle Trailer Fine-grain steel welded construction Front stops, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with robust outriggers on 20-foot base for swap bodies 7.15 and 7.45 rear-flush (with 7.15 swap bodies not rear-flush, fork pockets/frame protrude) Telescopic support leg at front 1 pair gearbox support legs at front, with straight lower part and single-sided operation on FR right Wheel chocks with holder Aluminium side underrun protection Steel rear underrun protection Semi-shell mudguards Mounting for truck-mounted forklift at rear, including 2 fork insertion pockets, 2 extendable support tubes, holder for chain safety device with locking pin. Rear underrun protection with lighting unit, foldable. Includes 2 loose rubber buffers for rear wall protection; counterweight recommended! Note: Partial low ground clearance when fitted with forklift, potential poor trailing behavior, no warranty! (Forklift self-weight up to max. 1,500 kg for trailers). (With proximity switch for forklift control in combination with lift axle). Due to the forklift mount, axles are shifted rearwards; mind load distribution when driving without forklift—customer's risk! (For swap body trailers, driving with a forklift is only permitted in combination with a swap body). Forklift mount as per AU 203670 adapted for 7.45 m swap bodies. Counterweight at front between frames, approx. 300 kg, if required—exact assessment still pending Towing device for central axle trailer Drawbar with certified 50 mm towing eye, forwarding version (not suitable for trucks with tail lift, or final check required upon order) Lower coupling drawbar Drawbar without length adjustment Axles + suspension SAF drum brake axles as per manufacturer’s choice Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension Brake system Two-line compressed air brake system Color-coded line layout for easy servicing Spring-loaded parking brake Duomatic connection at front with line to tractor unit, located FR-left Duomatic connection at front with line to tractor unit, located FR-right EBS electronic braking system with EBS plug at front and connection cable, FR-left Note: Trailer may only be towed by vehicles that ensure the effectiveness of ABS! With lift and lower valve, hold function in both raised/lowered position Vehicle stability system Wheels and tires 235/75 R17.5, brand at manufacturer’s discretion Twin arrangement steel rims, factory silver Electrics 24 volt, 4 x 3-chamber lights + 1 round reversing light and + 1 round rear fog light, side yellow LED lighting, protected installation! 2 white position lights at front 2 white/red lane marker lights at rear 1 x 15-pin plug at front with connection cable, FR-left 2 x 7-pin sockets at FR-left rear for truck-mounted forklift Itodpsi Ri Iaofx Ab Hsd 1 x 15-pin socket at FR-left rear for truck-mounted forklift LED worklights to both sides behind the 2nd axle (switched via reverse gear) Extra LED worklight at rear, switched via reverse gear Approval / License Plates Germany With Dekra inspection and certificate (per §13 EU FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips per ECE R 048, white on sides and red rear Paint Frame in DB 7350 Novagrau 10-year warranty

Stanje: novo, številka stroja/vozila: 06017a31026c05fc8f6ccf5ae, lastna masa: 3.055 kg, največja dovoljena obremenitev: 14.945 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235/75 r17,5, Further information Chassis: Swap body turntable trailer Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with sturdy outriggers on 20' base for swap bodies 7.15 and 7.45 meters Turntable with heavy-duty ball bearing slewing ring 2 wheel chocks with holders Aluminum side underrun protection Steel rear underrun protection Quarter mudguards at the front and half-shell mudguards at the rear Drawbar turntable trailer coupling Drawbar with certified 40 mm draw eye Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension Iodpfx Absi Ri Rcs Hjtd Braking system 2-line air brake system, color-coded piping for easy maintenance Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connection lines to the towing vehicle EBS, electronic braking system with EBS plug at the front and connecting cable Note: The trailer must only be towed by towing vehicles that ensure ABS functionality! With raise & lower valve, holding function for both positions Wheels and tires 235/75 R17.5, manufacturer brand at the manufacturer's discretion Steel twin rims, factory silver Electrics 24V system, LED multi-chamber lights with resistor, side marker lights in amber LED, license plate illumination in LED (Note: certain towing vehicles may show fault diagnoses despite correct function) 2 white front position lights in LED 2 white/red rear outline marker lamps in LED 1 x 15-pin plug at the front with connecting cable Additional LED work light at the rear, switched via the reversing light Approval / Plates Germany With Dekra inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective strips according to ECE R 048, white at the sides and red at the rear Paintwork Frame in DB 7350 Nova Grey Note: Archive images!

Stanje: rabljeno, številka stroja/vozila: 26f50c72368441dbf86440716, lastna masa: 2.500 kg, največja dovoljena obremenitev: 10.900 kg, skupna masa: 13.400 kg, konfiguracija osi: 2 osi, prva registracija: 11/2015, velikost pnevmatike: 285/70 r19,5, Leto izdelave: 2015, Further Information Chassis: Fine-grain steel welded construction, telescopic support leg, wheel chocks with holder, steel underride guard, half-shell mudguards Tandem Trailer Drawbar: Drawbar with certified 50 mm towing eye, undercoupler drawbar mechanically length-adjustable Axles: BPW disc brake axles, air suspension with lift & lower valve, electronic dolly steering system Ijdpfei Ri Rrox Ab Hetd Braking System: Two-line compressed air brake system, spring-actuated parking brake, Duomatic coupling head at front, with connecting lines to the tractor unit, fail-safe coupling heads for the semi-trailer, EBS, electronic braking system with EBS plug at front, including connecting cable Electrics: 24 Volt, side yellow lighting, 2 white position lights at the front, 2 white/red lane marker lights at the rear, 1 x 15-pin plug at the front with connecting cable to truck, 1 x 15-pin plug with connecting cable to the semi-trailer Approval: Contour marking with reflective tape according to ECE R 048, warning plate according to ECE - 70, truck Fifth wheel height approx.: 950 mm

Stanje: novo, številka stroja/vozila: ede0610378cbe39cc4883251d, lastna masa: 24.000 kg, največja dovoljena obremenitev: 7.550 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Chassis Low-loader Trailer Steel welded construction 1st pair of wheel recesses embedded in the driving lane area after the steel platform, bevelled for entry, approx. 1,400 mm long at the bottom, approx. 400 mm deep. Note! Frame is 400 mm higher in the main beam area than at the wheel recess. Itjdsi Ri Ryopfx Ab Hod If machines are to be transported where overall height must be verified, we request a technical data sheet for the machine types with precise specifications (if overall height is exceeded -> customer is responsible, approval required). Depending on ground clearance under the machines, inserts for the wheel recesses may be required on the customer side. Turntable with robust ball race ring, storage box integrated in the turntable front section Rear supports foldable 2 wheel chocks with holder Aluminium side underrun protection Full-width rear mudflap Extending wideners to 3,000 mm (not in rear bevel area) (The track width of the construction machines or vehicles to be transported must not exceed the outside frame width of 2,550 mm) Central storage compartment for wooden planks on loading area 70 mm wooden planks for widening to 3,000 mm Lashing eyes low-loader 3 pairs of 10 t lashing points integrated in the floor at the front incl. 6 pairs of lashing mushrooms recessed on top and at the side in the outer frame, each 10 t 1 x at the gooseneck The remaining distributed between, spacing not greater than 1,200 mm 1 x rear bevel 5 pairs of stake pockets integrated into the outer frame, internal 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Drawbar assembly trailer turntable Drawbar with tested 40 mm towing eye Axles & Suspension SAF drum-braked axles Axles/chassis laser aligned to reduce tyre and fuel wear Parabolic suspension with maintenance-free steel-rubber bearings Brake system 2-line compressed air brake system Colour-coded piping for easy service Spring loaded parking brake 2 interchange-proof coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS plug at the front, with connection cable Note: The trailer may only be towed by tractor units which ensure the functionality of ABS! Wheels and tyres 235 / 75 R 17.5 Manufacturer’s choice Steel rims in twin arrangement, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED illumination 2 white position lights at front 2 white/red track marker lights at rear 2 x 7-pin interchange-proof plugs at front with connecting cable 1 LED beacon with bracket, switched via parking light (removable lamp) 2 pairs of double warning boards, LED-lit and extendable up to 3,000 mm Floor Front area steel floor, incl. Then with 70 mm softwood floor, in wheel arch area steel/chequer plate covering Rear bevel with 70 mm softwood floor Low-loader deck incl. rear bevel 8,200 mm Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered With spring lifting aid Operating instructions For 10,000 kg axle load, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be achievable while complying with permissible axle/kingpin/saddle loads. (Poor driving and tracking behaviour possible due to incorrect load distribution) Country of registration / Plates Country of registration: Germany incl. With Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for two-line number pla

Stanje: novo, številka stroja/vozila: c13a96854ea37997845c1bf36, lastna masa: 6.860 kg, največja dovoljena obremenitev: 28.140 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235/75 17,5,

Stanje: novo, številka stroja/vozila: d24246f092ae53c0e155d19dd, lastna masa: 2.400 kg, največja dovoljena obremenitev: 13.600 kg, skupna masa: 16.000 kg, Further information Chassis: Tandem trailer Steel welded construction with approximately 152 mm high floor assembly, load-oriented and torsion-resistant steel frame design. Longitudinal floor frame with a load-resistant outer frame and guiding tunnel spaced at 600 mm intervals, tunnel with top and side alignment guides, tunnel height approx. 45 mm. Four container corner castings suitable for 20ft interchange units. 4 Jumbo support legs for parking height of 970 mm, laterally extendable and can be folded by 90°, with short safety struts and locking device, frame-mounted pin lock and robust drop latch as secondary transit locking system, symmetrical arrangement of the support legs—Type A2 for CWB C 745/782 for parking height approx. 970 mm. Ijdpfxokt Ni Us Ab Hetd Reinforcement between support feet. 7 pairs of recessed lashing rings in the outer frame, each rated for 2.5 tonnes. Heavy-duty pallet stops on both sides, approx. 20-25 mm high, lash points every 200 mm, loading height reduced by approx. 20-25 mm. Side door retainers. Rear underrun protection made from flat steel. Floor Anti-slip phenolic plywood, approx. 27 or 30 mm thick (at manufacturer's discretion), designed for high point loads, suitable for forklift axle loads up to max. 4400 kg. Front wall/corner stanchions Front stanchions 2,800 mm high, remainder closed with tarpaulin, steel corner stanchions in volume design, quick-release system for side curtain at front wall. Centre posts 1 pair of sliding posts, fully adjustable lengthwise, with four latching pockets and an extended pocket at the bottom. Insert slats Three rows of aluminium V-insert slats or wooden slats as per manufacturer’s choice, One extra row of aluminium V-insert slats. Rear wall/rear corner stanchions Rear corner stanchions, steel up to the underside of the roof, tarpaulin hangers with round tube and tension ratchet. Rear portal doors, double-leaf, each door with two internal locking rods. Tarpaulin Tarpaulin with welded horizontal and vertical tension belts. Tension locks made from stainless steel. Roof Sliding curtain roof, rear end-lift foldable, roof can slide from rear to front, L-shaped roof beam suitable for the automotive industry, internal width between roof beams approx. 2,490 mm, tarpaulin colour: white. EcoLift - lifting roof, can be raised by approx. 380 mm, gas strut assisted. Approval / Plaques Country of registration: Germany Manufacturer certificate to EN 12642 XL Paintwork Frame: hot-dip galvanized Front corner stanchions: hot-dip galvanized Front wall: aluminium Rear corner stanchions: hot-dip galvanized Rear wall: white Tarpaulin: RAL 9005 deep black with advertising lettering Note: Images are archive photos.

Stanje: rabljeno, številka stroja/vozila: 5a722b71e07e463c6c5370ad2, lastna masa: 6.927 kg, največja dovoljena obremenitev: 28.073 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2016, velikost pnevmatike: 385/55 r19,5, Further Information Fine-grained steel welded construction, fifth wheel plate with interchangeable 2" kingpin Note! With a frame neck height of 30 mm, the truck wheelbase must not exceed 3700 mm! Outer frame slightly angled with Load-Lock profile for lashing strap attachment. Note! To attach straps in conjunction with side walls, the side walls must be opened! Not permitted in the neck area! 10 pairs of additional lashing rings recessed into the outer frame, each rated for 2.5 t, outer frame with Load-Lock profile for lashing strap attachment. Note! Not usable with side walls closed! 24 t, 2-speed landing gear, single-sided operation, with straight lower part, without load equalization, folding supports front of bulkhead, extendable outward and foldable. During travel, positioned as far inward as possible (for dropping under load), without supports, pull-out ladder at rear, side-mounted door holders, wheel chocks with holder, aluminium side underrun protection, galvanized steel rear underrun protection, quarter mudguards in front of and behind each axle, anti-spray splash guards behind each axle, rear underrun protection Heavy Blocker rear impact guard, heavy-duty pallet stop both sides, approx. 20–25 mm high, with lashing option every 200 mm, loading height reduced by approx. 20–25 mm, plastic toolbox SAF disc brake axles, air suspension, without lift axle 2-line compressed-air braking system, spring-loaded parking brake, 2 anti-interchange coupling heads at front, without connecting line, EBS (Electronic Braking System) with EBS socket at front, without connecting cable. Attention: The trailer may only be towed by tractors that ensure the functionality of ABS! With raise & lower valve, vehicle stability control system 24 volt, multi-chamber lights, lateral yellow LED side markers, 2 white position lights in the front, 2 white/red lane marker lights at the rear, 2 x 7-pin and 1 x 15-pin coded sockets at the front, without connecting cable Floor: Front section with steel floor and anti-slip coating, plywood panels approx. 30 mm thick, cross joints with Omega insert, on longitudinal subframes for high point load capacity, suitable for forklift axle load up to max. 7100 kg, in wheel well area with steel/chequer plate covering. Front wall/corner posts: 2,580 mm high, steel corner posts in volume version, side curtain release mechanism at the front wall, lower inside at approx. 140 mm height with steel impact protection Center posts: 3 pairs of sliding stanchions, adjustable over the entire length, with 4-way staking pockets and long pocket below, 3 pairs of stake positions, aluminum plug-in slats Rear corner posts: Steel up to lower edge of roof, curtain retaining bracket with round tube and tension ratchet, rear portal doors, double-wing with 2 internal rod locking mechanisms each Itodpfx Aekyrlwsb Hod Curtain with integrated horizontal and vertical belts, tension locks made of stainless steel, customer branding on rear portal Roof: Sliding roof, rear section foldable upwards, can be slid from rear to front, L-type roof rail for automotive industry, internal width between roof rails approx. 2,490 mm, curtain color: white, EcoLift – roof can be raised by approx. 380 mm, supported by gas struts, Anti-Ice system, with a central hose, automatic ventilation Country of registration: Germany, type approval according to EC 2007/46, load securing certificate according to EN 12642 XL (valid only with 4 rows of aluminum slats), additional DC 9.5 certificate,

Stanje: rabljeno, številka stroja/vozila: 37ccfb14057f542c66638bc2e, lastna masa: 6.300 kg, največja dovoljena obremenitev: 28.700 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2020, velikost pnevmatike: 385/55 r19,5, Further Information Fine-grained steel welded construction, fifth wheel plate with replaceable 2-inch kingpin, 14 pairs of lashing rings recessed into the outer frame, each rated at 2.5 tonnes, outer frame with load-lock profile for attaching tie-down straps. Note! Not usable with drop sides! 24-ton, 2-speed landing gear, single-sided operation, with semi-round lower section and straight mounting plate, with thrust compensation. 2-step sliding ladder at the rear, lateral door holders, wheel chocks with holder, aluminium side impact protection, galvanized steel underrun protection, quarter-shell mudguards ahead of the 1st axle and behind each axle, with anti-spray flaps behind each axle, rear impact protection, spare wheel carrier for 1 spare wheel, with wheel fixing kit, plastic toolbox. SAF disc brake axles, air suspension. 2-line compressed air braking system, spring-loaded parking brake, 2 fail-safe coupling heads at the front, without connecting line, EBS (Electronic Braking System) with EBS socket at the front, without connecting cable. Attention: The towed vehicle may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! With lifting & lowering valve, vehicle roll stability system, tire pressure monitoring system TPMS (Haldex), in connection with info center. 24 volts, multi-chamber LED lights, amber LED side marker lights, 2 white LED position lights at the front, 2 white/red lane marker lights at the rear in LED, 2 x 7-pin fail-safe sockets at the front, without connecting cable, LED safelight at the top in rear corner posts. Floor: approx. 30 mm thick plywood boards with Omega inserts in cross joints, mounted on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg. Iodjkyrlzjpfx Ab Hjtd Front wall/corner posts: 2,600 mm high, steel corner posts in volume design, release device for side curtain at front wall, lower inner part approx. 140 mm high with steel rear impact protection. Centre posts: 5 sliding stanchions adjustable over the entire length, with 4-way insert pockets and extended pocket at the bottom (3 right-hand side, 2 left-hand side), 5 stanchion positions (3 right, 2 left), aluminium slats for slot-in. Rear corner posts in steel up to the lower roof edge, curtain attachment with round tube and curtain ratchet tensioner, rear portal doors in two wings each with 2 internal rotary bar locks. Curtain with welded horizontal and vertical belts, reinforcements for stanchions. Quick Lock system for side curtain with central lock, left side only, stainless steel tension locks on the right side, curtain with integrated vertical slats for load securing, one-sided on the left (then only 2 pairs of centre posts on the left). Roof: sliding roof, rear end lift-up, cover can be moved from rear to front, L-roof beam for automotive industry, internal width between roof beams approx. 2,490 mm, curtain color: white, lifting roof mechanically adjustable by approx. 380 mm, liftable roof can be opened while doors are closed. Country of registration: Germany, type approval according to EC 2007/46, load securing certificate according to EN 12642 XL, 24/7 service hotline, pre-mounted for single-line number plate holder, warning sign according to ECE-70, reflective strips: white (continuous on lower part of side curtain and at top in corners), Reflective strips: red, surrounding the rear portal.

Stanje: rabljeno, številka stroja/vozila: 7e3bf6da9bda95b470a3b0a97, lastna masa: 5.340 kg, največja dovoljena obremenitev: 12.660 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 09/2021, velikost pnevmatike: 235/75 r17,5, Leto izdelave: 2021, Additional Information Chassis Central Axle Trailer Fine-grain steel welded construction Type TPS 200 (special permit required) Gear support leg at the front Foldable rear support Wheel chocks with holder Aluminium side underrun protection Full-width rear mudflap Mudflaps in front of each axle and anti-spray mudflaps behind each axle 1x spare wheel holder for 1 E-wheel, with wheel fixing kit 1x spare wheel, same brand as main tyres, steel rim 1x stainless steel toolbox, width=600 / height=400 / depth=500 mm, with polished door, lockable Lashing eyes on low loader 5 pairs of stake pockets recessed in the outer frame, inside 70 x 40 mm (can be converted to 5 t ring lashing eyes, not included) 7 pairs of lashing mushrooms recessed in the top and side of the outer frame, each rated at 10 t 2 additional pairs of folding lashing eyes recessed in the low bed area, each 10 t – 1 pair at the front and 1 pair at rear incline Central axle trailer drawbar assembly Drawbar with tested 50 mm towing eye Axles and Suspension SAF drum brake axles Axle/chassis laser alignment reduces tyre and fuel consumption Axle spacing 1810 mm (with 10 t axle load technical rating) Iedpfx Aep N Dgujb Hetd Air suspension Brake system 2-line compressed air brake system, color-coded lines for easy servicing Spring-loaded parking brake Duomatic coupling at the front with connection to truck EBS, Electronic Braking System with EBS connector at the front and connecting cable Note: This trailer may only be towed by vehicles that ensure correct ABS function! With lift and lower valve Vehicle driving stability system Axle load detection via EBS CAN bus signal for display in driver’s cab – truck must be pre-equipped accordingly, not for trucks not fitted (not a calibrated scale) Wheels and Tyres 235/75 R17.5 make Fulda Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, lateral yellow LED marker lights 2 white position lamps at front 2 white/red track marker lamps at rear 1 x 15-pin connector at front with connection cable 1 additional LED work lamp at rear, switched with reverse light 1x LED beacon with bracket, switched with parking light (removable lamp) Floor Then fitted with 70 mm softwood floor, steel/chequer plate covering in wheel arch area Rear incline with Mega Grip anti-slip grating Low-bed area including rear incline 6500 mm Front bulkhead / corner posts 25 mm aluminium box section, 400 mm high, removable Ramps Steel ramps 3600 mm long, 750 mm wide, split and tensioned with cable pull, laterally adjustable Ramp adjustment, minimum spacing approx. 600 mm, maximum outer width approx. 2880 mm Ramp surface with Mega Grip anti-slip grating Hydraulic operation via dedicated electro-hydraulic unit mounted in a steel box, controls on right-hand side. Note: NATO socket with connection cable required on truck. Connection cable must not be attached while driving! Hydraulic lateral adjustment of ramps, individually controllable (only in combination with hydraulic ramp operation) Operating Instructions The specified gross weight is technically possible, but depending on the cargo the maximum gross weight may not be achievable while adhering to permitted axle, support and kingpin loads. (Incorrect load distribution may cause poor driving and tracking behavior) A special permit is required for 10,000 kg axle load. The permit must be applied for individually in each federal state; there is no guaranteed legal right to approval for 20 t gross weight. Customer assumes risk.

Stanje: rabljeno, številka stroja/vozila: 1dad0ba418a93eaeb83d187cb, lastna masa: 2.000 kg, največja dovoljena obremenitev: 11.400 kg, skupna masa: 13.400 kg, konfiguracija osi: 2 osi, prva registracija: 11/2018, velikost pnevmatike: 285/70 r19,5, Leto izdelave: 2018, Further information: Fine-grained steel welded construction, fifth wheel coupling, manufacturer of our choice for 2 kingpins, with ball-bearing turntable, maximum pivot angle 20°, lockable, support at the drawbar, wheel chocks with holder, steel underrun protection, quarter-shell mudguards in front of and behind the axle assembly, with tarpaulin cover when empty. CLG undercoupling drawbar with certified 50 mm towing eyes for both dolly and motor vehicle. BPW disc brake axles with 370 mm disc diameter, air suspension with lift and lower valve. 2-line compressed air brake system, spring-loaded parking brake, Duomatic coupling head at the front with connecting lines to the motor vehicle, 2 non-interchangeable coupling heads for the semi-trailer including connecting coil. EBS by Wabco, electronic braking system, with CAN router, EBS plug at the front, with EBS connection cable to the semi-trailer. Note: The trailer may only be towed by vehicles that guarantee ABS functionality! Axle load identification for trucks via EBS, without truck installation. Itodsi Riyaopfx Ab Hod 24 Volt, 4 x 3-chamber rear lights + 1 round rear fog lamp, side yellow LED lighting, 2 white position lights to the front, 2 white/red lane marker lights at the rear, 1 x 15-pin plug at the front with connecting cable to the truck, 1 x 15-pin socket with coiled cable to the semi-trailer, cable for reversing camera system with socket, additional LED working light at the rear, switched via reversing light. Country of registration: Germany, with Dekra approval, prepared for single-line license plate holder, contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear. Saddle height approx.: 950 mm

Stanje: novo, številka stroja/vozila: 92df8e9d6c187f34b20298f39, lastna masa: 4.900 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r22,5², Further information Chassis semi-trailer tipper Fine-grain steel welded construction, lightweight design, fifth wheel plate with replaceable 2" kingpin Curved front wall - patented Central telescopic support leg, uncoupling under load not possible, in uncoupled position the vehicle must be sloped to the rear. 2 wheel chocks with holders Iodsi Riz Rspfx Ab Hjtd Foldable underride guard Half-shell mudguards Integrated mudguard bracket, stone-repellent surface With anti-spray mudflaps only on the last axle 1 tarpaulin bar with holder 2 tow hooks at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Axles in off-road version Air suspension 1st axle: automatic lift axle including forced lowering and start-off aid, activated by triple brake application (start-off aid operational up to 30% axle overload and up to a maximum speed of 25 km/h) Hot-dip galvanized lift axle mechanism with 10-year anti-corrosion warranty Brake system 2-line compressed air brake system, color-coded piping for easy servicing. Spring-loaded parking brake 2 foolproof coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by tractor units that ensure operational ABS! With raise & lower valve Vehicle - driving stability system Wheels and tires 385/65 R22.5 brand at manufacturer's discretion Steel rims, factory silver Electrics 24 volt, multi-chamber rear lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane departure lights at the rear 2x 7-pin foolproof sockets at the front, without connection cable Hydraulics Low pressure cylinder, max. 170 bar, smallest section hard-chromed, with HDK screw coupling, fixed part, NW 48 mm. (without hose connection) Activation hydraulically via truck PTO Bodies Aluminium box body made of high-grade, wear-resistant material. Front wall 5 mm thick, with external side walls made of 30 mm hollow chamber profiles, cleanly welded, with bulk material-repellent top section profile. Interior with access ladder on front wall (not in combination with Cramaro). Shovel and broom holder mounted outside at front wall. Greenline – conical and aerodynamic body shape Membrane rear wall Rear wall pendulum flap with double hinge, external with double hook locking. Rear wall with rubber seal Note! Heat-resistant up to max. 170°C! Continuous 6 mm thick floor Standing platform with entry, connection plate for air/electrics and brake with large clearance for optimum accessibility. One-sided roll tarp deposit FR-right, with central locking FR-left Operating notes For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent damage and corrosion from the transported material. The specified total weight is technically possible; depending on the load, the permissible total weight may not be achievable within the allowed axle/support/semi-trailer loads. (Poor driving and trailing performance may occur due to incorrect load distribution) Registration country / license plates Germany Approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, side white, rear red Painting Frame DB 7350 Novagrau 10 years