Polpriklopnik z nizko nakladalno ploščadjo

DOLL T2P-S3FS21

Stanje: novo, lastna masa: 12.900 kg, največja dovoljena obremenitev: 34.100 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.850 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 350 mm, vzmetenje: drugo, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 12.900 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm in length - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractor units: 4x2, 6x2, and 6x4 Loading Platform: - Low-bed with external beams, extendable “SUPER LOW” design, approx. 6,850 mm in length - Low-bed with fixed hardwood flooring, approx. 40 mm thick, with mechanical locking device Rear Chassis: - Rear chassis with closed outer frame, chequer plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings, foldable to the outside - 1 pair of lashing rings recessed in the trough - 2 pairs of stake pockets for insertable stakes 100 x 50 mm in the external frame Pendulum Axle and Tyres: - "PENDULUM AXLE", all axles hydromechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and safety locking pins for securing in raised position - Axles painted with two layers of single-colour 2K paint in “FAY-Grey-34-0260” - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Kdjdpfx Abshlz R Se Hoi Accessories: - Preparation for the installation of bolt-on container locators for 1 x 20ft or 1 x 40ft container on the outer girders - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel - Yellow-red air couplers on the galvanized front connection bar - 4 wheel chocks - Remote steering from front and rear, operable via wired remote control with push buttons, with single-track alignment control - Hydraulic connections from gooseneck to low-bed with multi-coupling instead of screw couplings - Electro-hydraulic power unit - White reflective tape in accordance with EU regulations on sides, extension, and rear - European reflective plates (red-yellow) on the rear of the trailer - One bracket on each side of gooseneck and rear plate for warning panels, including socket - 6 pairs of threaded blocks between the lashing rings under the top chord on outer beam for mounting screw-on RUD Rings VLBG-4 - Detachable ALU side boards and rear board on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized insertable stakes are removable (body length approx. 2,560 mm) - Gooseneck rear upper area covered with removable cover - 5 pairs of stake pockets for insertable stakes 100 x 50 mm in the outer frame of the loading area - Folding extensions, approx. 230 mm per side - 2 pairs of bolted RUD Rings VLBG-4 M24 (LC 8,000 daN) - 1 pair of steel ramps for bridging the mounting hooks of the low-bed - Anti-skid sand layer painted on loading surface - 80 km/h speed stickers at rear and both sides - Spoon boom trough at rear chassis closed at rear with plug-in plate - Four extendable warning panels approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for rear axle steering in addition to cable remote, with indicator lights on receiver for alignment control - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard NLGI-2 grease - Load pressure gauge for determining axle loads - HRM Metallisation (High Resistance Metallisation) of outer frame - Complete steel structure shot blasted, then all defined visible areas metallized and finished with ZINACOR 850 (zinc 85% - aluminium 15%) hot galvanizing

Stanje: zelo dobro (rabljeno), konfiguracija osi: 2 osi, prva registracija: 03/2015, dolžina tovornega prostora: 134.450 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 480 mm, vzmetenje: hidravlika, Leto izdelave: 2015, Oprema: ABS, = Dodatne možnosti in oprema = - Centralno mazanje = Dodatne informacije = Konfiguracija osi Kjdpfxevtc Aie Ab Hsdi Vzmetenje: hidravlično vzmetenje Zadnja os 1: Max. obremenitev osi: 12.000 kg; Krmiljena Zadnja os 2: Max. obremenitev osi: 12.000 kg; Krmiljena Teže Lastna teža: 12.660 kg Nosilnost: 34.340 kg Skupna dovoljena masa: 47.000 kg Funkcionalno Višina nakladalne površine: 48 cm Izvlečna nadgradnja: Da Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Finančne informacije Cena: Po dogovoru Dodatne informacije Za več informacij se obrnite na Davida F Middelmana.

Stanje: novo, največja dovoljena obremenitev: 33.750 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our full inventory of immediately and short-notice available vehicles on our website. Excerpt from the equipment list. Complete equipment details available upon request. Gooseneck: - Gooseneck in SNT design for optimized loading deck length, approx. 3,750 mm - Gooseneck hydraulically lift/lower and detachable - Technical fifth-wheel load: 23,000 kg - For tractor units: 4 x 2, 6 x 2, and 6 x 4 Low bed: - Low bed with external beams, extendable SUPER LOW design, approx. length 6,850 mm - Low bed with fixed hardwood floor (approx. 40 mm thick) and mechanical locking - Supply lines protected within the extendable beams, automatically adjusting to bed length - 5 pairs of lashing rings, outward folding (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for screw-mounted RUD rings Rear undercarriage: - Rear chassis with closed outer frame, checker plate surface, continuous prism excavator recess, approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings, outward folding (LC 10,000 daN) - 1 pair of flat lashing rings in the recess LC 16,000 daN - 1 pair of flat lashing rings in the recess LC 10,600 daN - 2 pairs of stake pockets for removable stakes approx. 100 x 50 mm in the outer frame PENDLE-AXLE: - PENDLE-AXLE, all axles hydro-mechanically forced steering - Burst protection valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pins for secure positioning when raised - Final painting of axles with 2 coats of 2-component paint, single color in FAY grey 34-0260 - Technical axle load: 12,000 kg each, hydraulic axle compensation Kdjdpfxsxbmn Uo Ab Hsi - Axle tools - Tyres: 245/70 R 17.5 3PMSF – manufacturer at our discretion, load index (146/146F) TPMS: - TPMS tire pressure monitoring system according to ECE R 141 Braking system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Electrical system: - Electrical system according to EU regulations, 24V ASPÖCK-NORDIK (ASS3) lighting - All LED side marker lights flash with indicator - ASPÖCK-UNIBOX on the front terminal strip with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel construction made of high-strength fine-grained steel - Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: - Complete steel structure automatically shot-blasted with a blast wheel system after welding - Second blasting with corundum for optimum coating adhesion - HRM metallization of the entire chassis using ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection - Final coating with two layers of 2K top coat, single color in RAL 3002 carmine red, in accordance with RAL system 841GL Including the following additional features: - 2-inch kingpin - One galvanized steel front wall, approx. 400 mm high - Rear and front axle steering via cable remote control with push buttons and single track control of axles (without installation in tractor unit) - Electro-hydraulic unit - 2 pairs of bolted container locks on the outer beams. Including 2 pairs of container fastenings for 1x 20' or 1x 40' container - On the gooseneck, plug-in aluminum side boards and rear wall, approx. 2,440 x 400 mm (L x H) - The rear galvanized plug-in stakes are removable

Stanje: novo, lastna masa: 15.450 kg, največja dovoljena obremenitev: 65.550 kg, skupna masa: 80.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 21.900 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 925 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimized platform length, approx. 3,700 mm long, with rear tapering of approx. 1,000 mm x 10° Technical fifth wheel load: 30,000 kg. For tractors: 4x2, 6x2, and 6x4 Loading Platform: Double-extendable loading platform, approx. 8,800 mm long with rear taper of approx. 500 mm x 10°. A support table approx. 300 mm wide is welded to the central beam, featuring elongated slots at the front and rear for optional bridge elements that can be hooked in and repositioned Pneumatic locking with conical locking pin and reinforced locking positions, supply lines are protected inside the extendable beams and automatically adjust to the respective platform length Axles and Tyres: BPW axles and suspension, first axle self-steering, all other axles hydraulically and mechanically forced-steered First axle equipped with an electro-magnetic reverse lockout, activated via reverse gear and manually. Technical axle load: 12,000 kg. Air suspension with lift and lower valve Manufacturer by our choice Sockets and Lighting: 24-volt lighting system in accordance with EU regulations Kdedpfx Aborigw Ro Hei ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Complete HRM metallizing Full steel construction, shot-blasted, then hot-finished with ZINACOR 850 Paintwork: 6-stage finishing process: Complete steel construction shot-blasted after welding 1 coat of zinc-based primer, 1 coat of adhesion primer. Final paintwork in 2 coats of 2K paint in single-tone DB 7350 Novagrau, followed by cavity sealing with special wax Accessories: Detachable front wall made of steel, approx. 400 mm high Connection strip for supply lines to the tractor unit, fitted at the height of the outer frame profile ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets. If your pin configuration deviates from the ISO connector standard, please inform us 3 kW electro-hydraulic power unit for hydraulic functions (excluding hydraulic winches) 1 pair of plug-in ALU sidewalls on the gooseneck, approx. 400 mm high, anodized finish 3.5'' king pin. Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide 2 wheel chocks with holder in front of the front wall Mechanical landing legs with 2-speed gearbox and crank Control valves for hydraulic ramps located on the right side of the vehicle 1 pair of mechanical rear supports Central lubrication system with 1 pump, BEKAMAX brand, using standard grease according to NLGI-2 Removable guard covering the pump(s) of the central lubrication system Remote steering from front and rear, controlled by cable remote with push buttons, with axle tracking control, no installation required on tractor unit Under the gooseneck and on the rear crossmember, one 7-pin socket with holder for warning signs each on left and right. One 7-pin socket on the rear crossmember Manual and documentation One-piece INOX stowage box, approx. 2,480 x 340 x 390 mm, straight design Please note that any special equipment and accessories will increase the unladen weight and correspondingly reduce the payload Warning package: 4 warning boards, approx. 423 x 423 mm, extendable by approx. 1,000 mm, incl. 2 LED position lights and brackets for beacon.

Stanje: novo, največja dovoljena obremenitev: 25.300 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of vehicles, including those available for immediate and short-term delivery, can be found on our website. Excerpt from the equipment specification. Full specification available upon request. Gooseneck * Gooseneck in SNT design to optimize loading area length * Length approx. 3,750 mm, hydraulically lift-/lowerable, as well as detachable * Technical fifth-wheel load: 25,000 kg For tractors: 4 x 2 and 6 x 2 Kessel bridge * Low bed designed as telescopic Kessel bridge SUPER LOW design * Length approx. 6,850 mm * with mechanical locking * Supply lines are routed protectively within the telescopic beams and automatically adjust to the respective low bed length Rear chassis * Short version with closed outer frame and tread plate cover * Chassis with excavator recess, closed in the rear half to accommodate air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twinned. Load index 143/141J (146/146F) Brake system * WABCO brand, EBS-E according to EU regulations, WITHOUT connection cable to tractor unit Paintwork * 6-coat final treatment * Complete steel construction shot-blasted after welding * 1 layer of zinc-based primer * 1 layer of adhesion primer. Final coating with 2 layers of 2K (acrylic) paint, single colour, then cavity sealing with special wax Trailer colour * RAL 3002 Carmine red * Rim colour: silver-grey * Side wall colour: Aluminium-natural Accessories included * Steel front wall, plug-in, approx. 400 mm high * 3 kW electro-hydraulic pump unit for hydraulic operation, except for hydraulic winches. Without installation of supply connectors at the tractor unit * Mounting adapter for 1 spare wheel in front of the gooseneck front wall * Outer beams of the gooseneck with mounting holes for screwable lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear chamfer of the gooseneck (LC 6,000 daN) * 2 inch kingpin * Hydraulic traverse for supporting the gooseneck on the tractor or a dolly * Air connection with air pistol on the gooseneck * 1 pair of steel ramps with climbing cleats and retaining bolts to bridge the low bed attachment hooks * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * At the outer beams of the loading area, prepared for removable loading floor * Lashing rings with retaining spring approx. every 1,200 - 1,300 mm on the inside outer beams of the loading area * Lashing rings with retaining spring approx. every 1,200 - 1,300 mm on the outermost beams of the loading area (LC 10,000 daN) * Cut-outs over the lashing rings on the upper flange of the outer beams * Mechanical pin-lug coupling from the low bed to the running gear, for changing the loading area or installing extension beams. With electro-pneumatic-hydraulic couplings * Outer beams of the low bed with painted-on sand layer for anti-slip protection * 2nd driving height for upper drive position, max. ± 50 mm from the normal driving position, without installation of controls from the tractor unit Kdedpfxov Sw E Ae Ab Hoi * 1 pair of lashing rings with retaining spring at the transition from low bed to excavator recess (LC 10,000 daN) * Front and rear chamfered edge

Stanje: novo, največja dovoljena obremenitev: 25.645 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details available upon request. Loading Platform: - Low-bed with central beam in extendable design, length approx. 6,750 mm - 5 pairs of lashing rings, foldable outwards (LC 5,000 daN) - 1 pair of lashing rings, foldable outwards (LC 10,000 daN) - 1 pair of flush-mount lashing rings at the rear of the loading platform (LC 10,000 daN) Gooseneck: - Gooseneck hydraulically lift/lowerable and detachable Rear Running Gear: - Rear running gear in short version with closed outer frame and tread plate cover - Running gear with excavator trough, trough rear half enclosed for housing air tanks - 2 pairs of lashing rings, foldable outwards (LC 5,000 daN) - 1 pair of lashing rings, foldable outwards (LC 10,000 daN) - 1 pair of flush-mount lashing rings at the rear of the running gear (LC 10,000 daN) Axles: Kjdexf Silopfx Ab Hsdi - BPW axles, hydromechanically forced steering - Air suspension with lifting and lowering valve Tyres: - Tyres 245/70 R 17.5 3PMSF - TPMS: tyre pressure monitoring system as per ECE R 141 Brake System: - Wabco braking system in compliance with EU regulations with EBS-E (2S2M) Paintwork: - High-quality 2-component (2K) top coat, single colour RAL 3000 flame red Includes the following additional equipment: - 2 king pins - One galvanised steel front wall, approx. 400 mm high - Remote steering adjustment from front and rear via cable remote control with pushbuttons, including single-track axle alignment (without installation in the tractor unit) - Electro-hydraulic unit - Axle load gauge including axle load diagram - On the gooseneck, aluminium side boards and rear wall, plug-in type, approx. 2,440 x 400 mm (L x H). The rear galvanised plug-in stanchions are removable. (Upper body length approx. 2,560 mm) - Separate air connection with blow gun on the gooseneck - 2 work lights with switch on the trailer, mounted on left and right sides of the gooseneck platform - One INOX toolbox, approx. 1,350 x 400 x 400 mm, mounted on the gooseneck - 6 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform, 2 pairs in the rear frame of the running gear - Galvanised, extendable load width extensions approx. 230 mm per side - Hydraulic connections from the gooseneck to the low-bed with multi-coupling instead of screw couplings. No guarantee on seals. - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2 with removable pump protection - 2 pairs of WADER container pockets in the loading platform, for 1x 20’ container - One removable galvanised intermediate platform with 1 pair of WADER container pockets - 1 pair of steel ramps to bridge over the low-bed’s loading hooks - Loading platform with painted sand layer as anti-slip protection - HRM metallization (High Resistance Metallization)

Stanje: novo, lastna masa: 12.800 kg, največja dovoljena obremenitev: 36.200 kg, skupna masa: 49.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.850 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 375 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 12.800 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimised loading platform length, approx. 3,750 mm in length - Gooseneck can be raised/lowered hydraulically and is detachable - Technical fifth wheel load: 25,000 kg - For tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading platform: - Low-bed with external beams, designed as a telescopic vessel bridge in low-profile construction with front extension - Length 6,850 mm x width 2,540 mm - One locking position approx. every 1,000 mm on the extension Rear running gear: - Rear running gear with closed outer frame featuring checker plate cover and continuous prism excavator recess, approx. 1,250/700 x 505 mm, open at the rear Axles, suspension and tyres: - “PENDLE-AXLE”, all axles force-steered hydro-mechanically - Hose rupture valves on axle equalising cylinders with automatic reset function - Hydraulic cylinders with shut-off valves and pre-locking pins for securing in raised position - Final coat for axles with two layers of 2K acrylic paint, single-colour in “FAY-Grey-34-0260” - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres: 245/70 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 14 - TPMS sensors installed in all wheels, incl. spare wheels Kedjvy Edcepfx Ab Hodi Included accessories: - Plug-in steel front wall, approx. 400 mm high - 3 kW electro-hydraulic unit for hydraulic operations, except for hydraulic winches - One spare wheel with mounting adapter - External beams of the gooseneck with mounting holes for bolt-on lashing rings - Plug-in ALU side walls on the gooseneck, approx. 400 mm high, anodised - One plug-in ALU rear wall on the gooseneck, approx. 400 mm high, anodised - Checker plate covering on the gooseneck - Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide - Operating area lighting at the gooseneck with on/off switch - Hydraulic traverse to support the gooseneck on the tractor or a dolly - 2" king pin - Anti-slip stickers on the left chamfer of the gooseneck - The rear upper area of the gooseneck is closed with a removable cover - 4 wheel chocks with holders - Hydraulic connections from gooseneck to low-bed with multi-coupling instead of screw couplings - 1 pair of steel ramps with climbing strips and retaining bolts for bridging the low-bed mounting hooks - The ramps can be placed over or between the hooks - Mounting option for steel drive-on ramps at the rear between the external beams of the gooseneck - Prepared for bolt-on container locks for 1 x 20ft on the external beams - Mechanical pin and lug coupling from low-bed to running gear for exchanging the loading platform or inserting extension beams - With electro-pneumatic-hydraulic couplings - The outer beams of the low-bed are coated with painted-on sand layer as anti-slip protection - Removable (galvanised) load floor, can be inserted in 3 elements between the external beams, with hardwood surface - Foldable extensions, approx. 230 mm per side - Hanging strip at the front of the rear running gear to the low-bed for loose approach ramps - 2 pairs of stake pockets recessed into the outer frame of the running gear, for plug-in stakes approx. 100 x 50 mm - Hanging strip for loose ALU approach ramps at the rear cross member of the vehicle - Central lubrication system with 2 pumps - Radio and cable remote control - 4 extendable warning signs, approx. 423 mm x 423 mm - Numerous lashing positions

Stanje: rabljeno, lastna masa: 5.700 kg, največja dovoljena obremenitev: 32.300 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2000, dolžina tovornega prostora: 18.500 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 750 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5 160J, barva: srebrn, Oprema: ABS, Plastic mudguards, open flatbed, aluminum side walls height 750 mm, swinging, foldable, removable, BPW axles. Subject to modifications, prior sale and errors excepted. Kdjdsvytxzspfx Ab Hei

Stanje: rabljeno, prevoženi kilometri: 273.192 km, moč: 368 kW (500,34 KM), prva registracija: 02/2023, vrsta goriva: dizel, lastna masa: 9.243 kg, največja dovoljena obremenitev: 17.757 kg, skupna masa: 27.000 kg, velikost pnevmatike: 385 / 65 R 22,5, naslednji pregled (TÜV): 12/2026, zavore: retarder, barva: rdeča, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: zrak, število postelj: 2, Leto izdelave: 2023, velikost sprednje pnevmatike: 315 / 70 R 22,5, velikost zadnje pnevmatike: 315 / 70 R 22,5, Oprema: klimatska naprava, navigacijski sistem, parkirni grelec, spojler, Stand-alone air conditioning, work lights, electrically adjustable and heated exterior mirrors, hands-free car phone system for mobile, air-suspended passenger seat, ventilated seats for driver and passenger, roof hatch, tachometer, electric windows left and right, air-suspended driver seat, air/air suspension, 12 gears, low noise, automatic transmission, lift and lower function, climate control: automatic climate control + stand-alone air conditioning, refrigerator, leather steering wheel, air horns, multifunction steering wheel, navigation system, fog lights, entertainment: navigation device with screen, sleeper cab, 2 sleeping places, seat heating for driver and passenger, sun visor, spoiler package, standard auxiliary heater, tank capacity 460 + 265, safety package: adaptive cruise control + emergency brake assist + lane assist, additional brake retarder, Euro 6 engine, LED tail lights, LED headlights, adaptive cruise control, large display, air-suspended cab, length-adjustable fifth wheel coupling, PTO (power take-off) Kdedpfxox Hkpve Ab Hoi

Stanje: rabljeno, Leto izdelave: 2023, obratovalne ure: 480 h, Vehicle description: Year of manufacture: 2023 with approx. 480 operating hours GM20766 Weight: approx. 6,520 kg Equipment: Ksdpfx Abev Hmale Hsdi - Comfort cab with air conditioning, heating and radio - Including rain protection roof - Including rear-view camera - Blade support - Dipper arm approx. 1,650 mm - 2x LED light bars on the cab (front/rear) - 2x LED work lights on the boom - Rubber track approx. 400 mm wide - Electro-proportional auxiliary hydraulics, thumb-controlled - Auxiliary hydraulics for breaker and shear operation (High Flow) - 2x auxiliary hydraulics for tilting bucket operation (Low Flow) - Piping for hydraulic quick coupler operation - Additional leakage oil line - Refueling pump - Hose rupture safety valves for boom, dipper arm, and blade - Additional counterweight +500kg (overhang approx. 160 mm) - Special paintwork "All black" - Quick coupler / attachments available at extra cost Modifications, errors, and prior sale excepted = Further information = Drive: Crawler Please contact Timm Freese for further information.