Tovornjak za prevoz hlodovine

MERCEDES-BENZ TUROX 8x8 Eschlböck Biber 92 Holzhacker / 1.512h

Stanje: rabljeno, prevoženi kilometri: 36.686 km, moč: 460 kW (625,43 KM), prva registracija: 12/2016, vrsta goriva: dizel, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, zavore: retarder, barva: rdeča, vrsta prenosa: samodejen, emisijski razred: Euro 6, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, filter saj, klimatska naprava, pogon na vsa štiri kolesa, žerjav, If you have any inquiries about the vehicle, Mr. Seidel will be happy to assist you (Tel. …). Mercedes-Benz Arocs TUROX Eschlböck Biber 92 --- Body: Eschlböck Biber 92 Crane: Epsilon S110F104 Axle configuration: 8x8-4 Operating hours shredder: only 1,512 h! Numerous photos and videos available. We will gladly provide you with a leasing or financing offer upon request. Mr. Seidel (Tel. …) is at your service. Iedpfx Abew Hu Tfe Uoik For further information, visit our website. !!! Subject to errors, changes, and prior sale !!!

Stanje: novo, lastna masa: 385 kg, največja dovoljena obremenitev: 365 kg, skupna masa: 750 kg, dolžina tovornega prostora: 2.510 mm, širina tovornega prostora: 1.320 mm, višina nakladalnega prostora: 1.520 mm, prostornina tovornega prostora: 4,9 m³, barva: bela, gradbena višina: 2.080 mm, delovna širina: 1.760 mm, Manufacturer: Humbaur Model: Box Trailer Low-loader HK 752513-15P Permissible total weight: 750 kg, unbraked Iedpfx Abjhrz Uxe Uoik Payload: 365 kg Unladen weight: 385 kg Body dimensions: 2510 x 1320 x 1520 mm Tyres: 13 inch Loading height: 500 mm Rear with access ramp, loadable up to 300 kg Including 100 km/h type approval - V-drawbar, hot-dip galvanized - 13-pin plug and reversing light - 15 mm thick floor plate - Side walls and roof made of 15 mm thick multiplex wood with UV-resistant plastic coating - Interior light installed - Rod lock and hinges galvanized - 6 lashing rings integrated into the frame profile, lashing capacity 400 kg each, Dekra-tested - Jockey wheel - Humbaur multifunctional lighting integrated into underrun protection Price includes vehicle registration document (registration certificate Part II and COC papers) We have a large selection of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun We can provide a free temporary license plate upon request. We repair trailers from all manufacturers. Further accessories available on request. Technical modifications, price changes and errors excepted. No liability for errors or misprints. Torsion bar axle, independent wheel suspension, box type, jockey wheel, marker lights, galvanized rod lock and hinges, unbraked, incl. warranty, V-drawbar hot-dip galvanized, 13-pin plug and reversing light, 15 mm thick floor plate, side walls and roof made of 15 mm thick multiplex wood with UV-resistant plastic coating, interior light installed, single-wing door with rod lock, 6 lashing rings in the frame profile, lashing capacity 400 kg each, Dekra-tested.

Stanje: rabljeno, največja dovoljena obremenitev: 35.000 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2024, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 12.213 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 70 m³, skupna širina: 2.550 mm, skupna višina: 3.856 mm, Leto izdelave: 2024, Oprema: ABS, STAS 3-Axle AGRICULTURAL Walking Floor Semi-Trailer, 70 cbm First registration 05/2024, in like-new condition Internal dimensions (LxWxH): 12,213 x 2,475 x 2,300 mm Volume: approx. 70 cbm Unladen weight: only 7,010 kg Fifth wheel height: approx. 1,250 - 1,300 mm Total height: approx. 3,850 mm Iedpfxsv Dz Ixo Ab Ueik Short aluminium chassis over the axles SAF axles with large disc brakes, 430 mm, heavy-duty "Off-Road" version Wabco trailer EBS with RSS stability system 1st axle: LIFT AXLE 3rd axle: Steering axle Tyres: 6 x 385/65 R 22.5 ALU drop-leg supports, full load (2x 10 t.) 4x LED work lights Cargofloor moving floor, agricultural version with 15 boards, 6 mm smooth Aluminium end caps, welded RADIO remote control Side wall panels fully welded (grain version) Rear portal cross member, top section swivels Hydraulic connections at top and additionally at the bottom of the landing legs Roof crossmembers, reinforced, galvanised Integrated grain discharge hopper at rear, outlet opening facing downwards, operated from the side RENTING is the new BUYING – also available from us with full-service rental.

Stanje: novo, največja dovoljena obremenitev: 37.460 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.180 mm, širina tovornega prostora: 3.000 mm, višina nakladalnega prostora: 890 mm, vzmetenje: zrak, Oprema: ABS, HUMBAUR 3-axle low-loader trailer with wheel recesses and cranked loading platform, Model HTS30K – Wheel Well Version --- INCLUDES lift axle & trailing steering axle with SAF air suspension INCLUDES aluminium side boards and toolbox on the gooseneck INCLUDES 3-meter extension package INCLUDES excavator trough INCLUDES large hydraulic package (hydraulic ramp lifters, hydraulic side shift, & hydraulic rear support) Specification: V41 * Perm. gross weight: 48,000 kg * Payload approx. 37,460 kg * Chassis frame and ramps hot-dip galvanized * Visible parts painted in RAL colour * SAF air suspension unit incl. raise/lower function * Lift axle with starting aid and self-steering rear axle * EBS Electronic Braking System * WABCO Smart Board for axle load display * Excavator arm trough approx. 3,000 mm in length * Loading height approx. 890 mm * Fifth wheel height approx. 1,230 mm * Tyres: 235/75R17.5 – 12 units Iiedjkn N Rpopfx Ab Ujk * Low-bed length approx. 8,680 mm incl. incline * Gooseneck platform length approx. 3,500 mm incl. incline * 2" kingpin, adjustable by 340 mm for 2+3 axle tractor units * Wheel recess depth front 390 mm and rear 320 mm for various wheelbase sizes * Removable wheel recess inserts with hardwood covers * Gooseneck with 400 mm front wall * Aluminium side boards, 400 mm high, foldable + lockable storage box * 3 pairs of 6-ton recessed lashing rings in the raised deck * 3 pairs of 3-ton lashing points on the outer frame of the raised deck * 5 pairs of 10-ton recessed lashing rings in the low bed * 5 pairs of 6-ton lashing eyes bolted to the outer frame * 3 pairs of stake pockets in the outer frame (raised deck) * 5 pairs of stake pockets in the outer frame (low bed) * 3 pairs of 6-ton lashing eyes in the excavator arm trough * 3-metre widening package with folding outriggers, timber planks * Steel toolbox under the loading platform, lockable, with side compartment for timber planks storage * Warning package including lights * Rotating beacon at the rear * 2x LED reversing lights at the rear * 1-piece ramps approx. 3150 x 750 mm – approach angle approx. 10° * Softwood flooring on low-loader and gooseneck platforms * Hydraulic ramp lifters * Hydraulic side shift * Hydraulic rear support * COC documents * 40,000 kg gross weight only with special permit acc. to §70 * 1 pair of load guiding rails, galvanized * Gallows-type hanger for supply lines * Anti-slip strips on the loading ramp * Brake couplings: red/yellow * Electrics: triple socket with 2x 7-pin (1 x ISO 1185 / 1x ISO 3731, 24V-N/24V-S) and 15-pin ISO 12098 * ECE warning panel at the rear *Stock vehicle – available immediately *Subject to prior sale *Ex works price

Stanje: novo, moč: 352 kW (478,59 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, dolžina tovornega prostora: 4.800 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 800 mm, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, žerjav, Internal number for customer inquiries: 3-196 / IMMEDIATELY AVAILABLE----MAN TGS 26.480 6x4 three-way tipper with FASSI F255A.2.24 E-DYNAMIC loading crane Loading Crane: * FASSI F255A.2.24 e-dynamic * Hydraulic four-fold extension, 12.7 m at 1,415 kg * e-dynamic hose equipment for 2 auxiliary devices * Slewing range 400° * Dual knuckle link system with PROLINK (overextending articulated arm up to 15°) * Electronic overload shutdown with FX 500 Ijdpfx Aoxnn Susb Usik * FASSI Stability Control FSC incl. LMB II * Fassi RCS Radio remote control maxi - 6 functions with 3 joysticks (2-2-2) * Special stabilizers, support width 6.64 m, hydraulically extendable, including FSC * Supports operable via remote control * FL system (Full Lift) switchable fast-acting valve for the extensions * LED work lights Vehicle: * Diesel engine MAN D2676 LFAI, 353 kW (480 HP) power, 2,400 Nm torque, Euro 6e * Automatic transmission MAN TipMatic 12.26 OD * Driving modes MAN TipMatic Performance, Efficiency and Offroad, up to 70,000 kg * Drive 6x4 * Suspension leaf/air * Differential locks on driven rear axles * 3,600 mm main wheelbase, 1,400 mm wheelbase between rear axles * 310 l fuel tank capacity, 60 l AdBlue tank capacity * Full brake assist * High-performance engine brake MAN EVBec, adjustable in stages * Disc brakes on front axle, drum brakes on rear axles * Trailer coupling RINGFEDER type 4040/G150A * Driver's cab NN: the practical one (narrow, medium length, standard height) * Manually operated lift roof * Driver comfort seat, air-suspended, with lumbar support, shoulder adjustment, and seat heating * MAN EasyControl operating panel, 4 functions, operable from outside when door is open * Front window sun blind, inside, electric * Cool box * Infotainment control MAN SmartSelect with touchpad and direct access buttons * MAN Media system Navigation Advanced 7 inch * MAN Sound system Advanced * Navigation map Europe and Russia * Online traffic for navigation function Body: Three-way tipper body with FASSI F195A.2.24 e-dynamic crane mounted directly behind the cab (crane with premium equipment: radio remote control, hydraulic stabilizers operable via remote, work lights, etc.) Flatbed: * Dimensions LxWxH 4,800 mm x 2,420 mm x 800 mm * Front wall 1,000 mm high Substructure: Substructure as robust steel welded construction, two longitudinal beams with cross members to accommodate the 5 mm thick tipper profile and 5 mm floor plate made of Hardox or Naxtra. A 1,000 mm high steel front wall, fixed, with 2 round lashing rings in the inner area, at the outer side at half height. Corner stanchions fixed with lower locks. Rear and side walls (single-piece over the entire length) made of aluminum hollow profiles, side walls foldable and swinging with sideboard lifting aid. Tailgate also foldable and swinging, with central locking in the tipper profile. Floor plate made of Hardox or Naxtra in a thickness of 4 mm, neatly welded to tipper profile and longitudinal/cross members. Press traverse and tipping frame recessed and reinforced into the longitudinal beams. Lashing eyes (4 per side) each externally distributed along the tipper floor. Steel construction in St 52-3. All steel parts sandblasted, assembly parts painted or powder-coated in single color RAL 9016. Auxiliary frame: Auxiliary frame for accommodation of front and rear tipping frames, with press traverse and cross members. In the crane mounting area, closed as box profile with lateral re...

Stanje: novo, največja dovoljena obremenitev: 37.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2024, * TS 3 RM 30.0: * Wabco EBS-E (electronic braking system) * RDÜ tyre pressure monitoring * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW axles * Air suspension with lifting and lowering device as well as RtR valve * Last axle is a trailing steering axle with electro-pneumatic steering lock * Side underrun protection * Support winches at the front and swivel supports at the rear of the chassis * 15-pin electrical connector * LED tail lights * Mechanically adjustable warning sign packages front and rear * Rotating beacon (removable) rear left * Straight sheet steel mudguards * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Saddle platform with 45° bevelled front corners and toolbox at the front made of galvanised, powder-coated sheet steel, W = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm aluminium side boards (RAL 9010), foldable and removable, fitted to the side of the saddle platform * Rear wall -150 mm- slotted in * Rear bevel on saddle platform to low bed, approx. 700 mm long, each with 1 recessed lashing ring * Saddle platform with 50 mm clamped timber planks and low-bed platform with 60 mm clamped timber planks * Tread plate above axles * 9 x mechanical folding widenings for up to 3 m overall width, but not in the rear bevel (widening planks available with closed storage compartment across to the direction of travel underneath the loading area) * 2 lashing bars each recessed in the side outer frame of the saddle platform, 3 lashing rings each on the side of the low-bed platform, in addition 1 lashing ring centre rear at the end cross member, 2 x 5 t lashing rings each bolted below the outer frame of the wheel recesses on the side * 2 x 6.4 t UVV lashing rings each in the excavator stick recess * Excavator stick recess from the end of last rigid axle over steering axle right up to the end cross member, continuous, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm * Each side with 2 wheel wells, 390 mm deep and 640 mm wide with retractable cover for transport of wheel loaders with a wheelbase of 3,120 – 3,620 mm; front well bottom angled up 1,100 mm over 2,050 mm length, rear well bottom angled up 580 mm over 1,550 mm length * Hydraulic folding ramp with extendable tip, approx. 4,650 x 720 mm, incl. load holding valves and hydraulic lateral ramp shift * Outer plank on ramp made of 50 mm hardwood * Loading area above fifth wheel: approx. 3,950 x 2,480 mm * Loading height unladen: approx. 1,470 mm * Lower loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (including 860 mm approach ramp) * Chassis, rear folding supports, ramps, mechanical folding widenings are hot-dip galvanised * -- Axles, springs, air tanks painted in black tone -- * Suitable for 2- and 3-axle tractor units * Saddle height: approx. 1,220 mm * Tyres: 235/75R17.5 * Permissible gross weight of 48,000 kg technically possible * Vehicle is hot-dip galvanised Iedpfx Ael Tiiyjb Usik * Side boards painted in RAL 9010 pure white * Side walls in any RAL colour available at extra cost * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 40.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Excerpt from equipment. Complete equipment list upon request. Chassis: * Welded construction made from high-grade steel profiles in lightweight design with punched-through cross members * Rear taper approx. 630 mm long and front frame lowered by approx. 100 mm * At the rear of the chassis: excavator arm recess, approx. L 3,750 x W 640 x H 290 mm, located between the longitudinal beams with a steel tread-plate floor Wheel recesses: * In the lowered bed, approx. 1,700 mm ahead of the 1st axle, a pair of wheel recesses (support/surface under the ramps), approx. H 190 x L 1,550 x W 800 mm, incl. flat aluminium (climbing aid) * Additional pair of wheel recesses between the 1st and 2nd axle, approx. H 190 x L 1,080 x W 800 mm, incl. flat aluminium (climbing aid) * All wheel recesses with aluminium covers and steel tread-plate floors Coupling system: * 2-inch king pin Landing legs: * 2 x 12 t drop-type landing legs with aluminium compensating foot Rear supports: * Two adjustable drop supports Axles: * 3 x 10 t air-sprung axle units, brand SAF, with drum brakes approx. 300 x 200 mm * Automatic slack adjusters * ABS * Centrally mounted wheel connection for twin tyres * Total air suspension lift approx. 200 mm, raise approx. 140 mm, lower approx. 60 mm, control for raising/lowering via air spring valve with locking function Lift axle: * 1st axle liftable, controlled from chassis frame Steering: Iisdjvl N N Hepfx Ab Ujk * 3rd axle self-steering with manual and automatic reverse lock Brake system: * Two-line compressed-air brake system per EC, with EBS and RSS * Spring-loaded cylinders acting as parking brake on two axles * Coupling heads fixed to the front cross member, reversal-proof, designed per EC, without connection lines to tractor unit Tyres: * 12x 235/75 R17.5 - brand of our choice, mounted on 6.75x17.5 rims with offset Mudguards: * Per EC, 1/4 PVC mudguard Floor: * Wooden floor recessed into outer frame. Over the wheels with steel tread-plate cover Load securing upper deck: * 4 pairs of folding lashing rings in the outer frame, evenly distributed, lashing capacity approx. 8 t * Holes for lashing straps every approx. 500 mm in the outer frame Load securing low deck: * 8 pairs of folding lashing rings in the outer frame, evenly distributed, lashing capacity approx. 8 t * 4 pairs of folding lashing rings recessed into the longitudinal beams of the chassis, lashing capacity approx. 8 t * Holes for lashing straps every approx. 500 mm in the outer frame Stake pockets upper deck: * 4 pairs of stake pockets in the outer frame, evenly distributed Stake pockets low deck: * 6 pairs of stake pockets in the outer frame, evenly distributed Insertable stakes: * 20 stakes made of galvanized tubing approx. 80/50 mm, total length approx. 1,000 mm Front wall: * Bolted, fixed steel corner stakes filled with approx. 25 mm aluminium hollow profiles Drop-in sideboard for upper deck: * Each side at the front with a drop-in sideboard made from approx. 400 x 25 mm aluminium hollow profiles, length approx. 2,400 mm, removable, insertion pocket at the front on the front wall stake, rear in extra stake pockets approx. 80/50 mm * Additional drop-in sideboard approx. 400 x 25 mm between the rear extra stake pockets for rear load securing Ramps: * 2 spring-assisted aluminium ramps, loadable up to approx. 32 t when supported * Ramps secured with over-center latch Lighting: * Per

Stanje: rabljeno, največja dovoljena obremenitev: 55.020 kg, skupna masa: 64.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2000, With forced steering (turntable) - Design type "plateau" crane ballast - Corners at right angles, closed outer frame - Front linkage integrated into the chassis frame - Sattel plate mounted on a ball-bearing slewing ring with interchangeable 3.5" king pin and adjustable steering wedge - Fifth wheel load 24,000 kg - Hydraulic landing legs at the front with electric power unit Chassis - 4-axle chassis with air suspension incl. lift-lower valve - Axles by SAF - Tyres: 425/65 R 22.5 Braking system - Two-line all-wheel pneumatic brake system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded actuators - ABV (ABS) - Liftable 1st axle (viewed in direction of travel) Technical data Loading area (L x W): approx. 11,000 x 2,550 mm Coupling dimension B: 10,400 mm Loaded loading height (in the chassis area): approx. 1,550 mm with a loaded fifth wheel height of 1,300 mm Steering Iiedpfswuixlex Ab Uok 1st axle rigid, liftable 3rd – 4th axle with forced steering

Stanje: novo, največja dovoljena obremenitev: 37.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2024, * TS 3 RM 30.0: * Wabco EBS-E (electronic braking system) * RDÜ tyre pressure monitoring * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW axles * Air suspension with lifting and lowering device as well as RtR valve * Last axle is a trailing steering axle with electro-pneumatic steering lock * Side underrun protection * Support winches at the front and swivel supports at the rear of the chassis * 15-pin electrical connector * LED tail lights * Mechanically adjustable warning sign packages front and rear * Rotating beacon (removable) rear left * Straight sheet steel mudguards * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Saddle platform with 45° bevelled front corners and toolbox at the front made of galvanised, powder-coated sheet steel, W = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm aluminium side boards (RAL 9010), foldable and removable, fitted to the side of the saddle platform Iisdpfxsq Dyvko Ab Uok * Rear wall -150 mm- slotted in * Rear bevel on saddle platform to low bed, approx. 700 mm long, each with 1 recessed lashing ring * Saddle platform with 50 mm clamped timber planks and low-bed platform with 60 mm clamped timber planks * Tread plate above axles * 9 x mechanical folding widenings for up to 3 m overall width, but not in the rear bevel (widening planks available with closed storage compartment across to the direction of travel underneath the loading area) * 2 lashing bars each recessed in the side outer frame of the saddle platform, 3 lashing rings each on the side of the low-bed platform, in addition 1 lashing ring centre rear at the end cross member, 2 x 5 t lashing rings each bolted below the outer frame of the wheel recesses on the side * 2 x 6.4 t UVV lashing rings each in the excavator stick recess * Excavator stick recess from the end of last rigid axle over steering axle right up to the end cross member, continuous, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm * Each side with 2 wheel wells, 390 mm deep and 640 mm wide with retractable cover for transport of wheel loaders with a wheelbase of 3,120 – 3,620 mm; front well bottom angled up 1,100 mm over 2,050 mm length, rear well bottom angled up 580 mm over 1,550 mm length * Hydraulic folding ramp with extendable tip, approx. 4,650 x 720 mm, incl. load holding valves and hydraulic lateral ramp shift * Outer plank on ramp made of 50 mm hardwood * Loading area above fifth wheel: approx. 3,950 x 2,480 mm * Loading height unladen: approx. 1,470 mm * Lower loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (including 860 mm approach ramp) * Chassis, rear folding supports, ramps, mechanical folding widenings are hot-dip galvanised * -- Axles, springs, air tanks painted in black tone -- * Suitable for 2- and 3-axle tractor units * Saddle height: approx. 1,220 mm * Tyres: 235/75R17.5 * Permissible gross weight of 48,000 kg technically possible * Vehicle is hot-dip galvanised * Side boards painted in RAL 9010 pure white * Side walls in any RAL colour available at extra cost * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf